Earthquake Sound Tiller ROTOTILLERS User Manual

OPERATING INSTRUCTIONS &  
PARTS EXPLOSIONS  
FRONT TINE ROTOTILLERS  
3365 6.50 TORQUE  
RATED BRIGGS  
3365PS 6.50 TORQUE  
RATED BRIGGS  
3365CE 6.50 TORQUE  
RATED BRIGGS  
R3355H 5.5 HP HONDA  
ARDISAM  
.com  
OMFT07  
Rev. 1/18/07  
© Copyright 2007 Ardisam, Inc.  
All Rights Reserved. Printed in USA.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
INTROdUCTION  
WARRANTY  
ThANkYOU . . .  
for purchasing an Earthquake® forward rotating front tine rototiller  
from Ardisam, Inc. We have worked to ensure that this front tine  
rototiller meets high standards for usability and durability.With proper  
care, your rototiller will provide many years of service.Please take the  
time to read this manual carefully to learn how to correctly operate  
and maintain your rototiller. This manual should be considered a  
permanent part of your rototiller.Due to continuous effort to perfect our  
product, certain procedures and specifications are subject to change  
without notice. Congratulations on your investment in quality.  
ONEYEAR lImITEd WARRANTY  
The Ardisam, Inc., Manufacturing Company warrants  
this rototiller to be free from defects in material or  
workmanship. Conditions of this warranty include:  
What is covered under warranty:  
For the first year from the date of purchase, Ardisam  
will furnish 100% parts and labor to correct any  
defect caused by faulty material or workmanship. All  
products returned for warranty repair must have  
prior approval from Ardisam, Inc. by calling our  
customer service department at 800-ꢀ45-6007 for  
a return material authorization number (RmA#).  
Items subject to normal wear and tear, such as belts,  
batteries, tines, shear bolts and tires, due to the  
nature of their function are not covered under this  
warranty. Any unit used in a commercial application  
is covered for a period of 90 days after purchase.The  
engine is covered under a separate warranty issued  
by the engine manufacturer as stated in the engine  
manual.  
CONTENTS  
Registration & Warranty................................................................... 3  
Safety .............................................................................................. 4  
Unpacking and Assembly................................................................ 7  
Features .......................................................................................... 8  
Controls ........................................................................................... 9  
Operation....................................................................................... 10  
Maintenance & Storage................................................................. 12  
Troubleshooting & Repair .............................................................. 16  
Certificate of Conformity................................................................ 17  
Parts Explosions............................................................................ 18  
What is not covered under warranty:  
This warranty applies only to products which  
have not been repaired or altered outside our  
factory. It covers only defects resulting from  
normal use, and does not cover defects arising  
from misuse, alteration, negligence, or accident.  
This warranty applies only to the original purchaser  
and is nontransferable.  
REGISTRATION  
Record your model number and serial number in the space provided  
for easy reference.Fill out and mail the registration card located in your  
parts packet.Warranty is valid only if your completed registration card  
is received by Ardisam, Inc., within two weeks of the purchase date.  
This warranty supersedes all other warranties  
either expressed or implied and all other obligations  
or liabilities on our part. Ardisam, Inc., does not  
assume, and does not authorize any other person  
to assume for us, any liability in connection with the  
sale of our products. This guarantee is void unless  
the warranty card is properly filled out and returned  
to Ardisam, Inc., Cumberland, Wisconsin, within two  
weeks of the purchase date.  
Model Number  
Serial Number  
Engine Serial Number  
Date of Purchase  
Place of Purchase  
Earthquake, A Division of Ardisam, Inc.  
1690 Elm Street; P.O. Box 666  
Cumberland, Wisconsin 54829  
800-345-6007 · Fax (715) 822-2223  
800-ꢀ45-6007  
Page ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
SAFETY  
!
dANGER  
OWNER’S RESPONSIBIlITY  
Accurate assembly and safe and effective use of the rototiller is the  
owner’s responsibility.  
dANGER INdICATES A SERIOUS INjURY OR FA-  
TAlITY WIll RESUlT IF ThE SAFETY INSTRUC-  
TIONS ThAT FOllOW ThIS SIGNAl WORd ARE  
NOT OBEYEd.  
Read and follow all safety instructions.  
Carefully follow all assembly instructions.  
Maintain the tiller according to directions and schedule included  
in this Earthquake operator’s manual.  
!
WARNING  
WARNING INdICATES A SERIOUS INjURY OR FA-  
TAlITY COUld RESUlT IF ThE SAFETY INSTRUC-  
TIONS ThAT FOllOW ThIS SIGNAl WORd ARE  
NOT OBEYEd.  
Ensure that anyone who uses the tiller is familiar with all  
controls and safety precautions.  
SPECIAl mESSAGES  
Your manual contains special messages to bring attention to potential  
safety concerns, machine damage as well as helpful operating and  
servicing information.Please read all the information carefully to avoid  
injury and machine damage.  
!
CAUTION  
NOTE: General information is given throughout the manual  
that may help the operator in the operation or service of the  
machine.  
CAUTION INdICATES YOU CAN OR YOUR EQUIP-  
mENT CAN BE hURT IF ThE SAFETY INSTRUC-  
TIONS ThAT FOllOW ThIS SIGNAl WORd ARE  
NOT OBEYEd.  
ImPORTANT SAFETY PRECAUTIONS  
Please read this section carefully. Operate the tiller according to the  
safety instructions and recommendations outlined here and inserted  
throughout the text.Anyone who uses this tiller must read the instruc-  
tions and be familiar with the controls. Your tiller is equipped with a  
safety device that enables you to stop the wheels and tines quickly  
in an emergency. Learn how the drive safety control lever operates  
and how to control the tiller at all times.  
ImPORTANT  
ImPORTANT INdICATES hElPFUl INFORmATION  
FOR PROPER ASSEmBlY, OPERATION, OR  
mAINTENANCE OFYOUR EQUIPmENT.  
This symbol points out important safety instructions  
which if not followed could endanger your personal  
safety. Read and follow all instructions in this manual  
before attempting to operate this equipment.  
!
WARNING  
YOUmUSTREAd,UNdERSTANdANdCOmPlYWITh  
All SAFETY ANd OPERATING INSTRUCTIONS IN  
ThIS mANUAl BEFORE ATTEmPTING TO SETUP  
ANd OPERATEYOUR ROTOTIllER.  
Do not allow children to operate this rototiller. Keep small children away  
from the area being tilled. Do not allow adults to operate the tiller without  
proper instruction.  
FAIlURE TO COmPlY WITh All SAFETY ANd  
OPERATING INSTRUCTIONS CAN RESUlT IN lOSS  
OF mAChINE CONTROl, SERIOUS PERSONAl  
INjURY TOYOU ANd/OR BYSTANdERS, ANd RISk  
OF EQUIPmENT ANd PROPERTY dAmAGE. ThE  
TRIANGlE IN ThE TExT SIGNIFIES ImPORTANT  
CAUTIONS OR WARNINGS WhICh mUST BE  
FOllOWEd.  
PREPARATION  
Dress appropriately when operating the tiller. Always wear sturdy  
footwear.Never wear sandals, sneakers, or open shoes, and never  
operate the tiller with bare feet. Do not wear loose clothing that  
might get caught in moving parts.  
Carefully inspect the area to be tilled and remove all foreign objects.  
Do not till above underground water lines, gas lines, electric cables,  
or pipes.Do not operate the tiller in soil with large rocks and foreign  
objects which can damage the equipment.  
CAlIFORNIA PROPOSITION 65 WARNING  
ENGINE ExhAUST FROm ThIS PROdUCT  
CONTAINS ChEmICAlS kNOWN TO ThE STATE  
OF CAlIFORNIA TO CAUSE CANCER, BIRTh  
dEFECTS, OR OThER REPROdUCTIvE hARm.  
Disengage all clutches and leave all control levers in the neutral  
position before starting the engine.  
Handle fuel with care; it is highly flammable.  
a. Use an approved fuel container.  
b. Never add fuel to a running engine or hot engine.  
Page 4  
800-ꢀ45-6007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
c. Fill fuel tank outdoors with extreme care. Never fill fuel  
tank indoors.  
ImPORTANT  
ThE RIGhT ANd lEFT SIdES OF  
YOUR ROTOTIllER ARE dETER-  
mINEd FROm ThE OPERATING POSI-  
TION ASYOU FACE ThE dIRECTION  
OF FORWARd TRAvEl.  
d. Replace gasoline cap securely and clean up spilled fuel  
before restarting.  
Never attempt to make any adjustments while the engine is  
running.  
ENGINE IS ShIPPEd FROm FACTORY  
WIThOUT OIl. YOU mUST Add EN-  
GINE OIl BEFORE STARTING ENGINE.  
OPERATION  
• Do not operate the tiller under the influence of alcohol or  
drugs.  
• Never operate the tiller without guards, covers, and hoods in  
place.  
mAINTENANCE ANd STORAGE  
• Keep machine, attachments, and accessories in safe working  
condition.  
• Keep hands, feet, and clothing away from rotating parts.Keep  
clear of tiller tines at all times.  
• Check shear bolts, engine mounting bolts, and other bolts at  
frequent intervals for proper tightness to be sure the equipment  
is in safe working condition.  
• Tines rotate when tiller is engaged, tines rotate when the drive  
safety control lever is pulled down. Releasing the drive safety  
control lever to neutral stops the tines.  
To prevent accidental starting, always disconnect and secure  
the spark plug wire from the spark plug before performing tiller  
maintenance.  
• Use extreme caution when operating on or crossing gravel  
drives, walks, or roads. Stay alert for hidden hazards or  
traffic.  
• Never run the engine indoors. Exhaust fumes are deadly.  
• Always allow muffler to cool before filling fuel tank.  
• After striking a foreign object, stop the engine, remove the  
wire from the spark plug, thoroughly inspect the tiller for  
any damage, and repair the damage before restarting and  
operating the tiller.  
• Never store equipment with gasoline in the tank inside a closed  
building where fumes may reach an open flame or spark.Allow  
the engine to cool before storing in any building.  
• If vegetation clogs the tines, STOP ThE ENGINE ANd  
dISCONNECT ThE SPARk PlUG WIRE before removing  
vegetation by hand.  
• Always refer to the operator’s guide instructions for important  
details if the tiller is to be stored for an extended period.  
• Engine muffler will be hot from operation. Do not touch it with  
bare skin or a severe burn may result.  
• If the unit should start to vibrate abnormally, stop the engine  
and check immediately for the cause.Vibration is generally a  
warning of trouble.  
• Do not run the engine indoors; exhaust fumes are deadly.  
• Do not overload the machine capacity by attempting to till too  
deep at too fast a rate.  
• Never allow bystanders near the unit.  
• Never operate the tiller without good visibility or light.  
• Be careful when tilling in hard ground.The tines may catch in  
the ground and propel the tiller forward. If this occurs, let go  
of the handlebars and do not restrain the machine.  
Take all possible precautions when leaving the machine  
unattended. Disengage all control levers, stop the engine,  
wait for all moving parts to stop, and make certain guards  
and shields are in place.  
• When leaving the operating position for any reason:  
- shut off the engine.  
- wait for all moving parts to stop.  
800-ꢀ45-6007  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
SAFETY dECAlS  
This rototiller unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry  
leader in outdoor power equipment manufacturing.  
Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operated  
this equipment safely and effectively, we have placed several safety labels on the tiller to remind you of this important information  
while you are operating the unit.  
These important safety labels are illustrated below, and are shown here to help familiarize you with the location and content of the  
safety messages you will see as you perform normal tilling operations. Please review these labels now. If you have any questions  
regarding their meaning or how to comply with these instructions, reread the complete safety instruction text on the preceding pages,  
or contact your local dealer.  
Should any of the safety labels become unreadable because of being worn, faded, or otherwise damaged during the use of your tiller,  
please use the part number information provided to order a replacement label from your local authorized dealer.  
The safety labels are easily applied, and will act as a constant visual reminder to you, and others who may use the equipment. Follow  
the safety instructions necessary for safe, effective operation of your rototiller.  
Part No. lBlꢀ100C  
TINES dANGER/OPERATION  
hood decal  
Part No. lBl821B  
hOOd WARNING  
hood decal  
Part No. lBlꢀ100h  
WARNING  
Pivot mount decal  
Part No. lBlꢀ100d  
ClUTCh ENGAGE  
handlebar decal  
Part No. lBl516C  
WARNING  
Belt Cover decal  
Page 6  
800-ꢀ45-6007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
UNPACkING ANd ASSEmBlY  
UNPACk TIllER & ASSEmBlE  
ImPORTANT  
ThE RIGhT ANd lEFT SIdES OFYOUR  
ROTOTIllERAREdETERmINEdFROm  
ThE OPERATING POSITION AS YOU  
1. Open top of carton and remove handlebar assembly.  
2. Find parts packet. Parts packet for 3365/3365CE contains:  
FACE ThE dIRECTION OF FORWARd  
TRAvEl.  
6- 5/16-18 x 1-3/4” bolts  
6- 5/16” spring lockwashers  
2- hand knobs  
ENGINE IS ShIPPEd FROm FACTORY  
WIThOUT OIl.YOU mUST Add ENGINE  
OIl BEFORE STARTING ENGINE.  
4- locknuts  
2- 1/2” push nuts  
1- detent pin  
!
CAUTION  
Parts packet for 3365PS/R3365H contains:  
dO NOT TRY TO lIFT ThE ROTOTIllER FROm ThE  
CARTON.  
2- 3/8-16 x 1” bolts  
2- 3/8-16 biway locknuts  
2- 5/16-18 x 1” bolts  
4- 5/16-18 x 1-3/4” bolts  
6- 5/16” spring lockwashers  
2- hand knobs  
4- 5/16” locknuts  
2- 1/2” push nuts  
1- detent pin  
3. Cut open end of carton and remove machine:  
a. Install wheels on each end of axle, tap on push nuts with a  
hammer.  
b. Assemble tines to unit, inside tines first. Sharp edge of tine  
will be away from operator at top or face down at front of  
machine.  
NARROW TINE WIdTh  
c. Outside tines have two positions- wide 21” & narrow 16”. For  
narrow width - assemble with short side of tine holder pipe  
towards center of machine.  
d. For wide width - move left tine to right side and right to left  
side. Assemble with long half of tine pipe towards machine.  
e. Slide top handle of handlebar over lower loop. Put 5/16-18  
x 1-3/4” bolts thru both holes from inside out, put on 5/16”  
spring lockwashers and tighten with hand knobs. Model  
3365PS/R3365H will use 3/8-16 x 1” bolts with nuts and 5/16-  
18 x 1” bolts with hand knobs. See parts explosion on page  
19.  
WIdE TINE WIdTh  
f. Check upper and lower jam nuts for tightness. See page 9,  
Belt Tension Adjustment.  
g. Add and check engine oil.  
upper  
handlebar  
lower  
handlebar  
loop  
INSTAll dEPTh REGUlATOR lEvER  
1. Install the depth regulator lever through hole in bracket from the  
bottom up with curve to rear of unit and secure with detent pin.  
hand knob  
FIll ENGINE CRANkCASE  
1. Add oil according to engine manual. do not overfill. Use a clean,  
high quality detergent oil.Container must be marked A.P.I.Service  
SF - SJ. Use no special additives with recommended oils. do not  
mix oil with gasoline. Oil level must be full. Check the oil level  
by removing oil fill plug. Oil level should be up to the bottom of the  
fill plug opening.  
depth  
regulator  
lever  
detent pin  
2. Always check oil level before starting engine. Refer to engine  
manual for capacity and type of oil to use.  
800-ꢀ45-6007  
Page 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
FEATURES (ꢀꢀ65/ꢀꢀ65CE)  
The advantage of the EARThQUAkE® BAdGER™ gear drive rototiller over other front tine tillers, is the exclusive  
unfolding and flexible drag bar. This gives the Earthquake® Badger™ gear drive tiller its stability and its versatil-  
ity. For easy transport, fold the wheels under the engine. During operation, the wheels unfold back and the drag bar  
folds down. The long length between the tines and the drag bar make this the most comfortable front tine tiller on the  
market.  
drive safety control lever  
forward cable  
hand knob  
belt guard  
3-way adjustable tine widths  
Transport Position  
Operating Position  
Page 8  
800-ꢀ45-6007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
CONTROlS  
dRIvE SAFETY CONTROl lEvER  
!
CAUTION  
ThIS INFORmATION IS PROvIdEd hERE ONlY TO  
INTROdUCE ThE CONTROlS. dO NOT START ThE  
ENGINE ATThISTImE. STARTING ANd OPERATING  
INSTRUCTIONS ARE GIvEN ON PAGE 10. PlEASE  
REAd ThIS SECTION ANd All OPERATING ANd  
SAFETY INSTRUCTIONS BEFORE STARTINGYOUR  
TIllER.  
Engage tines into forward, releasing returns machine to neutral.  
Pulling down on drive safety control lever engages the tines.Releasing  
the drive safety control lever disengages the tines to a neutral  
position.  
BElT TENSION AdjUSTmENT  
Proper belt tension is critical to good performance. After 1/2 hour of  
operation, all cables may have to be adjusted due to initial stretch.  
Thereafter, check tension after every 2 hours of operation.  
AS A SAFETY PRECAUTION,ThE dRIvE SAFETY  
CONTROl lEvER WIll NOT lOCk IN ThE  
FORWARd POSITION.  
To increase belt tension:  
TO STOPThEWhEElS ANdTINES AT ANYTImE  
RElEASE ThE dRIvE SAFETY CONTROl lE-  
vER.  
1. Loosen upper jam nut. Turn nut up cable in 1/8” increments.  
2. Tighten lower jam nut.  
3. Check adjustment.  
This procedure can be repeated until conduit adjustment bolts have  
no more adjustment left. If no more adjustment can be made, belt  
may have to be replaced.  
!
WARNING  
ENGINE ShOUld BE OFF BEFORE AdjUSTING  
ANY CONTROlS.  
dEPTh REGUlATOR lEvER  
Tilling depth is controlled by the height of the depth regulator lever.  
To adjust tilling depth.  
dO NOT AdjUST TIllING dEPTh UNlESS dRIvE  
SAFETY CONTROl lEvER IS RElEASEd TO ThE  
NEUTRAl POSITION.  
1. Remove detent pin.  
2. Raise the depth regulator lever to position tines at chosen tilling  
depth.  
3. Align hole in depth regulator lever with hole in depth regulator  
bracket and replace detent pin.  
drive safety control lever disengaged  
drive safety control lever disengaged  
1/4” stretch  
1/4” stretch  
upper jam nut  
lower jam nut  
upper jam nut  
lower jam nut  
forward cable  
forward cable  
model ꢀꢀ65/ꢀꢀ65CE handlebar  
model ꢀꢀ65PS/Rꢀꢀ65h handlebar  
800-ꢀ45-6007  
Page ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
OPERATION  
PRE-START INSPECTION  
1. Make sure all safety guards are in place and all nuts and bolts  
are secure.  
ImPORTANT  
ENGINE IS ShIPPEd FROm FACTORYWIThOUT OIl.  
YOU mUST Add ENGINE OIl BEFORE STARTING  
ENGINE.  
2. Check oil level in engine crankcase. See your engine manual for  
procedure and specifications.  
PRACTICE OPERATING ThE CONTROlS ANd  
TIllER WITh TINES OUT OF GROUNd BEFORE  
BEGINNING TO TIll. IT IS ImPORTANT ThAT YOU  
kNOW hOWTO USEThETIllER PROPERlY, kEEP  
CONTROl AT All TImES, STOP ThE TINES ANd  
WhEElS FROm TURNING, ANd STOP ThE ENGINE  
IF NECESSARY. IF YOU dO NOT kNOW hOW TO  
dO ThESE ThINGS, REAd ThE CONTROlS ANd  
SAFETY SECTIONS BEFORE PROCEEdING.  
3. Inspect air cleaner for cleanliness. See your engine manual for  
procedure.  
4. Check the fuel supply. Fill the fuel tank no closer than 1 inch  
from top of tank to provide space for expansion. See your engine  
manual for fuel recommendations.  
5. Be sure spark plug wire is attached and spark plug is  
tightened securely.  
6. Check position of wheels.  
!
CAUTION  
7. Check depth regulator lever position.  
PlEASE dO NOT START YOUR TIllER UNTIl YOU  
hAvE REAdThE mANUAlThAT CAmEWIThYOUR  
ENGINE, ANd ThE SECTIONS IN ThIS mANUAl  
TITlEd CONTROlS ANd SAFETY. IF YOU hAvE  
REAd ThESE, FOllOW ThE STEPS BElOW TO  
START YOUR TIllER. AlWAYS PERFORm ThIS  
PRE-START ChECklIST BEFORE STARTING ThE  
ENGINE.  
8. Examine underneath and around engine for signs of oil or fuel  
leaks.  
9. Inspect fuel hoses for tightness and fuel seepage.  
10.Look for signs of engine damage.  
11.Remove excessive debris from muffler area and recoil starter.  
START-UP  
The controls required to start and run the rototiller are located on the  
engine and are marked “Choke” and “Throttle”.  
!
A more detailed description of engine operation and all related  
precautions and procedures can be found in the engine manufacturer’s  
manual that accompanies each tiller.  
WARNING  
GASOlINE IS hIGhlY FlAmmABlE ANd mUST  
BE hANdlEd WITh CARE. NEvER FIll ThE TANk  
WhENThE ENGINE IS hOT OR RUNNING. AlWAYS  
mOvE OUTdOORS TO FIll ThE TANk.  
COld STARTS  
1. Move choke lever to full choke position.  
2. Move throttle lever to “start”.  
TEmPERATUREOFmUFFlERANdNEARBYAREAS  
mAY ExCEEd 150° F. AvOId ThESE AREAS.  
3. Pull starting rope out slowly one time and allow to return  
normally.  
dO NOT mOvE ChOkE CONTROl TO ChOkE TO  
STOP ENGINE. BACkFIRE OR ENGINE dAmAGE  
mAY OCCUR.  
4. Pull starting rope out rapidly, and allow rope to return normally.  
5. When engine starts, gradually move choke lever to “no choke”  
position and increase throttle speed.  
TO STOPThE ENGINE AT ANYTImE, mOvEThROT-  
TlE CONTROl TO ThE OFF POSITION. TO STOP  
TINES AT ANY TImE, RElEASE dRIvE SAFETY  
CONTROl lEvER TO ThE NEUTRAl POSITION.  
RESTARTING A WARm ENGINE  
Restarting an engine that is already warm from previous running does  
not normally require use of the choke.  
AlWAYS RElEASE dRIvE SAFETY CONTROl  
lEvER TO ThE NEUTRAl POSITION BEFORE  
AdjUSTING ThE dEPTh OF ThE REGUlATOR  
lEvER.  
1. Move throttle lever to “start” position.  
2. Pull starting rope out rapidly until engine starts.Allow rope to return  
normally. Repeat until engine starts.  
3. Adjust throttle speed to “high” for best tiller action.  
Page 10  
800-ꢀ45-6007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
OPERATING SPEEd  
For normal tilling, set the throttle lever to “fast”.  
!
WARNING  
ExTREmE CAUTION mUST BE TAkEN IN SElECT-  
ING TIllING dEPTh. IF YOU ATTEmPT TO TIll  
TOO dEEPlY FOR SOIl CONdITIONS, ThAT IS,  
WIThThE dRAG STAkE INTOO hIGh A POSITION,  
lOSS OF CONTROl COUld RESUlT.  
ShUTTING dOWN  
To stop the engine at any time, move throttle control to the off position.  
To stop wheels and tines at any time, release the drive safety control  
lever to the neutral position.  
IF REmOvING mATERIAl FROm ThE TINES BY  
hANd, STOP ENGINE ANd REmOvE SPARk PlUG  
WIRE FIRST.  
TIllING  
1. Adjust the depth regulator lever to desired tilling depth.  
NOTE: Raise depth regulator lever up one hole at a time,  
testing tiller operation after each raise.Raising depth regulator  
lever too high can result in loss of control of tiller!  
!
dANGER  
2. Move the throttle control to fast.  
ENGINE ANd SURROUNdING PARTS BECOmE  
ExTREmElY hOT dURING NORmAl USE ANdWIll  
CAUSE SERIOUS BURN INjURIES IF TOUChEd  
BEFORE ThE ENGINE hAS COOlEd.  
3. Place the tiller in motion by pushing down on the drive safety control  
lever--this will engage the tines.  
AllOW ENGINE TO COOl COmPlETElY BEFORE  
TOUChING ThESE hOT SURFACES.  
AlWAYS kEEP hANdS ANd FEET ClEAR OF  
ROTATING mAChINE PARTS.  
800-ꢀ45-6007  
Page 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
mAINTENANCE ANd STORAGE  
mAINTENANCE SChEdUlE  
Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide you  
with years of reliable operation.  
Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance.  
Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.  
Before  
Each Use  
50 hours or  
Every Season  
maintenance Operation  
Page  
Change belt tension  
Change forward belt  
Engine maintenance  
Check or fill engine crankcase  
Clean tine axle shaft  
Lubrication  
13  
13  
14  
14  
14  
14  
-
X
X
X
2
X
X
X
X
1
Check throttle control adjustment  
Em = See engine manual  
1 Adjust throttle control after first 3 hours of operation or if engine is hard to start or run-on occurs.  
2 Change oil after first 5-8 hours of use, then after every 50 hours or every season. Change oil every 25  
hours when operating under heavy load or in high temperatures.  
SERvICING ThE ROTOTIllER  
The following information will help you make the necessary checks  
and perform the procedures required to follow the normal care  
recommendations made for your rototiller unit.  
!
WARNING  
To prevent accidental starting:  
If you prefer, your local authorized dealer can make these checks and  
perform the required procedures for you.  
Engine must be turned off and cool, and spark  
plug wire must be removed and secured from  
spark plug before checking and adjusting engine  
or equipment.  
Page 12  
800-ꢀ45-6007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
ChECk BElT TENSION  
!
WARNING  
Belt tension may decrease over time. It must be adjusted within the  
first half hour of operation, and checked after every two hours of  
operation. Proper adjustment will assure long belt life. Too much or  
too little belt tension will cause premature belt failure. To check and  
adjust the forward belt tension:  
ChECk FORWARd BElT TENSION REGUlARlY.  
TOO mUCh OR TOO lITTlE TENSION WIll CAUSE  
PREmATURE BElT FAIlURE.  
1. Turn off engine. Engine must be cool.  
2. Remove spark plug wire from spark plug and secure.  
3. With drive safety control lever in the neutral position, measure  
length of spring when in its relaxed state.  
remove belt  
from front  
4. Pull down on drive safety control lever and measure length of  
spring when compressed. Ideal length would be 1/4” shorter.  
ChANGE FORWARd BElT  
1. Turn off engine. Engine must be cool.  
2. Remove spark plug wire from spark plug and secure.  
3. Remove belt guard.  
• remove the belt from the engine pulley:  
- gently pull the engine recoil rope to rotate the pulley.  
- with the pulley turning, force the belt out of the V-groove.  
- slide the belt free of the engine pulley.  
- pull the belt down and out of the way.  
- push the bolt forward and out front of machine.  
• install new belt:  
BElT REPlACEmENT PART #:  
3370 (forward)  
- place belt in transmission pulley groove.  
- gently pull the engine recoil rope to rotate the pulley while  
forcing the belt into the V-groove.  
4. Replace belt guard.  
5. Attach spark plug wire.  
800-ꢀ45-6007  
Page 1ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
ENGINE mAINTENANCE  
ImPORTANT  
ENGINEISShIPPEdFROmFACTORYWIThOUTOIl.  
YOU mUST Add ENGINE OIl BEFORE STARTING  
ENGINE.  
Refer to the engine manual included in your parts packet for  
information on engine maintenance. Your engine manual provides  
detailed information and a maintenance schedule for performing the  
following tasks:  
1. Check oil level before each use or after every 8 hours of  
operation.  
ENGINE CAN OvERhEAT ANd BECOmE dAmAGEd  
IF dEBRIS BlOCkS ThE COOlING SYSTEm OR  
ROTATING SCREEN.  
2. Change oil after first 5-8 hours of operation.Change oil while engine  
is warm. Refill with new oil of recommended grade.  
NEvER RUN ENGINE WIThOUT COmPlETE AIR  
ClEANER INSTAllEd ON ENGINE.  
4. Check spark plug yearly or every 100 hours of operation.  
5. Service air cleaner.  
6. Keep engine and parts clean.  
!
CAUTION  
7. Check engine and equipment often for loose nuts and bolts, keep  
these items tightened.  
dO NOT OPERATE TIllER BEFORE REAdING  
ThE ENGINE mANUAl PROvIdEd IN ThE PARTS  
PACkET.  
ChECk OR FIll ENGINE CRANkCASE  
1. Add oil according to engine manual. do not overfill. Use a clean,  
high quality detergent oil.Container must be marked A.P.I.Service  
SF - SJ. Use no special additives with recommended oils. do not  
mix oil with gasoline. Oil level must be full. Check the oil level  
by removing oil fill plug. Oil level should be up to the bottom of the  
fill plug opening on most engines.  
!
WARNING  
TEmPERATUREOFmUFFlERANdNEARBYAREAS  
mAY ExCEEd 150° F. AvOIdThESE AREAS.  
2. Always check oil level before starting engine. Refer to engine  
manual for capacity and type of oil to use.  
ClEAN TINE AxlE ShAFT  
1. Turn off engine. Engine must be cool.  
2. Remove spark plug wire and secure from spark plug.  
3. Remove all vegetation, string, wire, and other material that may  
have accumulated on the axle between the inside set of tines and  
the seal on the transmission housing.  
4. Replace spark plug wire.  
lUBRICATION  
Proper lubrication of moving mechanical parts is critical for proper  
care and maintenance.Oil the moving parts shown at 10 hour intervals  
using a 30 weight oil.  
Page 14  
800-ꢀ45-6007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
STORAGE  
PREPARE FOR STORAGE  
!
WARNING  
dO NOT STORE TIllER IN AN UNvENTIlATEd  
AREA WhERE FUEl FUmES mAY REACh FlAmE,  
SPARkS, PIlOT lIGhTS OR AN IGNITEd OBjECT.  
dRAIN FUEl OUTdOORS AWAY FROm ANY  
IGNITION SOURCES. USE ONlY APPROvEd FUEl  
CONTAINERS.  
Follow the steps below to prepare your tiller for storage. Read your  
engine manual for detailed instructions on preparing the engine for  
storage.  
1. Protect wheels and axles from rust:  
- Coat the axles lightly with axle grease.  
2. Drain fuel system completely following engine manufacturer’s  
instructions or add fuel stabilizer to prevent fuel from gumming up  
during extended storage period.  
3. While engine is still warm, drain the oil from the engine. Refill with  
fresh oil of the recommended grade.  
4. Clean external surfaces, engine and cooling fan.  
5. Remove spark plug, pour one ounce of SAE 30 oil into spark plug  
hole.  
6. Plug hole and pull starter cord slowly to distribute oil evenly in  
cylinder head area.  
7. Reinstall spark plug.  
8. Transport unit to a suitable storage location. If you have chosen to  
use a fuel stabilizer and have not drained the fuel system, follow all  
safety instructions storage precautions in this manual to prevent the  
possibility of fire from the ignition of gasoline fumes. Remember,  
gasoline fumes can travel to distant sources of ignition and ignite,  
causing risk of explosion and fire.  
9. If there is any possibility of unauthorized use or tampering, remove  
the spark plug and store it in a safe place before storing the rototiller  
unit.Be sure to plug the spark plug hole to prevent foreign material  
from entering.  
800-ꢀ45-6007  
Page 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
TROUBlEShOOTING ANd REPAIR  
!
WARNING  
TROUBlEShOOTING GUIdE  
PRACTICE SAFETY AT All TImES. ENGINE mUST BE  
TURNEd OFF ANd AllOWEd TO COOl, ANd SPARk  
PlUGWIRE mUST BE dISCONNECTEd ANd SECUREd  
BEFORE ATTEmPTING ANY mAINTENANCE OR  
REPAIR.  
While normal care and routine maintenance will extend the life of  
your rototiller, prolonged or constant use may eventually require  
that service be performed to allow it to continue operating properly.  
The troubleshooting guide below lists the most common problems,  
causes and remedies.  
FAIlURE TO COmPlY WITh ThIS SAFETY REQUIREmENT  
CAN RESUlT IN SERIOUS PERSONAl INjURY TO YOU  
OR BYSTANdERS.  
PROBlEm  
REmEdY/ACTION  
Engine will not start  
• Add gas to gas tank.  
• Connect spark plug wire to spark plug  
• Throttle must be positioned at choke for a cold start  
Engine runs rough, floods during operation  
Engine is hard to start  
• Clean or replace air cleaner  
• Drain old fuel and replace with fresh. Use gas stabilizer  
at end of season  
• Make sure spark plug wire is securely attached to spark  
plug  
• Drive safety control lever must be released to neutral  
to start the engine  
Engine misses or lacks power  
• Raise the tines for shallow tilling by raising the depth  
regulator lever  
• Clean or replace air cleaner  
• Improper carburetor adjustment, take to authorized  
engine service center  
• Replace spark plug and adjust gap  
• Drain and refill gas tank and carburetor  
Engine will not stop when throttle control is positioned at stop • See engine manual to check and adjust throttle linkage  
Tiller moves forward during starting  
• Drive safety control lever must be released to neutral  
to start the engine  
Tiller is difficult to control when tilling  
(machine jumps or lurches forward)  
• Lower engine speed in hard ground  
• Raise the tines for shallower tilling by lowering the  
depth regulator lever  
Belts squeal in neutral  
• Adjust forward belt guide:  
- turn engine off and allow muffler to cool  
- disconnect spark plug wire and secure from spark plug  
- pull down on drive safety control lever  
- manually bend forward belt guide so there is 1/16 inch  
or less clearance between belt guide and belt  
- replace spark plug wire  
Belts squeal in forward operation  
Turn engine off and allow muffler to cool  
• Disconnect spark plug wire and secure from spark plug  
• Release drive safety control lever to neutral  
• Adjust engage cable  
• Replace spark plug wire  
Excessive heat build up in transmission/tine area during till-  
ing  
• Remove vegetation  
• Check transmission fluid and fill if needed  
Page 16  
800-ꢀ45-6007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
800-ꢀ45-6007  
Page 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
ꢀꢀ65/ꢀꢀ65CE hANdlEBAR PARTS  
3262  
3268  
3170  
53606  
53620  
53607  
3269, 3604  
3108A  
48406  
48406  
3335  
8655  
504  
90141  
PART #  
3108A  
3170  
dESCRIPTION  
QTY.  
PART #  
dESCRIPTION  
QTY.  
CABLE ASSEMBLY W/FERREL  
NUT, PUSH 3/8” DIA.  
DRIVE SAFETY CONTROL LEVER  
LINK, 5-3/4” LONG  
1
1
1
1
1
1
2
2
3603  
CONNECTOR, FEMALE 1/4”  
(3365CE)  
2
3604  
HANDLE, TOP W/TOGGLE  
SWITCH BRACKET (3365CE)  
1
3262  
3268  
504  
LOCKWASHER, SPRING 5/16”  
NUT, HEX NYLOC 10-24  
2
1
2
1
1
2
4
3269  
HANDLE, TOP  
53606  
53607  
53620  
60G70  
8655  
3335  
HANDLE, BOTTOM  
NUT, HEX JAM 5/16-24  
48406  
3600  
KNOB, FIVE-STAR 5/16-18  
SPRING, COMPRESSION  
SWITCH, TOGGLE (3365CE)  
BOLT, HEX HD 5/16-18 X 1-3/4”  
RING TERMINAL, INSULATED  
3/8 “ POST (3365CE)  
3601  
3602  
WIRE, 14 GAUGE (3365CE)  
3
1
90141  
BOLT, SFHH W/PATCH  
3/8-16 X 1” GR5  
CONNECTOR, SELF-STRIPPING  
18-1 (3365CE)  
Page 18  
800-ꢀ45-6007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
ꢀꢀ65PS/Rꢀꢀ55h hANdlEBAR PARTS  
53650  
53632  
53612  
53614  
53631  
53620  
3359  
3353  
103  
53629  
503  
53606  
53607  
2102  
60G56  
2104  
48406  
105  
504  
3358  
101A  
3108A  
mOdEl Rꢀꢀ65h  
90138  
2104  
PART #  
503  
dESCRIPTION  
QTY.  
PART #  
dESCRIPTION  
QTY.  
BOLT, HH 5/16-18 X 1-1/2”  
LOCKWASHER, SPRING 5/16”  
NUT, HEX NYLOC 10-24  
NUT, HEX JAM 5/16-24  
LINK 11-5/8” LONG  
1
2
1
2
1
1
1
1
2
101A  
CABLE, THROTTLE CONTROL  
INCLUDES KNOB (R3365H)  
1
504  
53606  
53607  
53612  
53614  
53620  
53629  
53631  
103  
BOLT, SLRH 10-32 X 1/2” (R3365H)  
NUT, HEX NYLOC 10-32 (R3365H)  
BOLT, HEX HD 3/8-16 X 1 GR5  
NUT, BI-WAY HEX LOCK 3/8-16  
BOLT, HHCS 5/16-18 X 1 GR5  
CABLE ASSEMBLY W/FERREL  
2
2
2
6
2
1
1
105  
2102  
2104  
26124  
3108A  
3353  
PIN, CLEVIS 1/4 X 1-1/2”  
SPRING, COMPRESSION  
BRACKET, CABLE MOUNT  
GRIP, HANDLEBAR 1” ID FLANGE-  
LESS  
HANDLEBAR WELDMENT  
(R3365H)  
53632  
53650  
60G56  
90138  
NUT, PUSH 1/4”  
1
1
1
4
3358  
3359  
MOUNT, HANDLEBAR  
1
1
LEVER, CONTROL  
HANDLEBAR WELDMENT  
(3365PS)  
NUT, BI-WAY LOCK 5/16-18  
BOLT, SFHH 3/8-16 X 3/4”  
48406  
KNOB, FIVE-STAR 5/16-18  
2
800-ꢀ45-6007  
Page 1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
ꢀꢀ65/ꢀꢀ65CE/ꢀꢀ65PS mOTOR mOUNT & hOOd  
PARTS  
Rꢀꢀ65h mOTOR mOUNT & hOOd PARTS  
60G56  
33055  
3305,  
3305CE  
WK6  
31781  
809  
719  
802  
63118  
31782  
3130A  
3196  
WL14  
802  
67538  
744  
1407  
717  
1416  
WF516  
60G56  
1413  
2104  
3275D  
67538  
3182A  
53730  
1418  
53596B  
3360  
3370  
WF516  
3128  
67538  
48261  
3335  
8930  
53106  
3371  
mOdEl ꢀꢀ65PS & Rꢀꢀ65h BUmPER  
Page 20  
800-ꢀ45-6007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
mOTOR mOUNT & hOOd PARTS  
PART #  
dESCRIPTION  
QTY.  
PART #  
dESCRIPTION  
QTY.  
1401  
BOLT, HHCS 5/16-18 X 1-1/4” GR5  
(3365, 3365CE, 3365PS)  
1
3335  
ARM, LOWER HANDLEBAR  
(3365PS, R3365H)  
1
1407  
SPRING, FORWARD ARM  
PULLEY, FORWARD IDLER  
PIN, LINK  
1
1
1
1
2
4
1
1
1
1
1
3360  
3364  
IDLER ARM, FORWARD  
1
1
1413  
KEY, SQUARE 3/16” X 5/8”  
(3365, 3365CE, 3365PS)  
1416  
3370  
3371  
BELT, FORWARD  
1
1
1418  
PIN, COTTER  
COVER, FRONT BELT 4-HOLE  
(3365PS, R3365H)  
1714250  
1960519  
2104  
WHEEL & TIRE ASSEMBLY  
PUSH NUT 1/2” DIA.  
NUT, 2-WAY HEX 3/8-16  
SHIELD, TINE  
48261  
48300  
53106  
WASHER, FLAT 1/4”  
(3365PS, R3365H)  
4
1
4
3128  
BOLT, HHCS 5/16-18 X 2-1/4” GR5  
(3365, 3365CE, 3365PS)  
3130A  
3157  
FRAME, ENGINE MOUNT  
LEVER, DEPTH REGULATOR  
NUT, BI-WAY LOCK 1/4-20  
(3365PS, R3365H)  
3178  
PULLEY, ENGINE, SINGLE-  
GROOVE 3/4” ID  
(3365, 3365CE, 3365PS)  
53596B  
53730  
YOKE, CABLE  
1
1
BOLT, HH 5/16-18 X 2-1/2” GR5  
(R3365H)  
31781  
31782  
PULLEY, ENGINE, SINGLE-  
GROOVE 3/4” ID MODIFIED  
(R3365H)  
1
3
60G56  
63118  
67538  
69170  
717  
NUT, BI-WAY LOCK 5/16-18  
BOLT, HHCS 1/4-20 X 1/2”  
NUT, HEX NYLOC 1/4-20  
PIN, DETENT 5/16” X 2”  
4
6
8
1
1
SPACER, ENGINE  
(R3365H)  
3182A  
3196  
3202  
BELT GUIDE & MOUNT  
1
2
2
BOLT, HH 5/16-24 X 1-3/4”  
(R3365H)  
BOLT, HHCS 1/4-20 X 7-1/2” GR5  
SCREW, SHEET METAL 1/4 X 3/4”  
(3365, 3365CE)  
719  
741  
WASHER, SPRING LOCK 3/8”  
(R3365H)  
1
1
3207  
SPACER, ENGINE  
(3365, 3365CE, 3365PS)  
1
1
1
1
1
1
1
SPACER, CRANK SHAFT  
(3365, 3365CE, 3365PS)  
3237  
COVER, FRONT BELT  
(3365, 3365CE)  
744  
802  
SPACER, BELT GUIDE  
2
2
BOLT, HH 5/16-24 X 3/4” GR5  
(R3365H)  
3275  
SHIELD, DIRT  
(3365, 3365CE, 3365PS)  
807  
BOLT, BHSCS W/PATCH  
5/16-24 X 3/4”  
(3365, 3365CE, 3365PS)  
1
3275D  
3305  
SHIELD, DIRT W/HOLE  
(R3365H)  
ENGINE, 6.50 T.R. BRIGGS  
(3365, 3365PS)  
809  
WASHER, FLAT 1” OD X 5/16” X  
.047” THICK  
1
4
1
33055  
3305CE  
ENGINE, 5.5 HP HONDA  
(R3365H)  
8930  
90140  
BOLT, HH 1/4-20 X 3/4” GR5  
(3365PS, R3365H)  
ENGINE, 6.50 T.R. BRIGGS  
(3365CE)  
BOLT, HEX HD 5/16-18 X 3-1/4”  
(3365, 3365CE, 3365PS)  
3329  
3330  
3331  
3332  
TAIL MOUNT, UPPER  
1
1
1
1
WF516  
WK6  
WASHER, FLAT 5/16”  
3
1
TAIL MOUNT, LOWER  
KEY, WOODRUFF #6  
(R3365H)  
SHAFT, WHEEL 1/2”  
SHAFT, TAIL MOUNT HINGE 1/2”  
WL14  
WASHER, SPRING LOCK 1/4”  
2
800-ꢀ45-6007  
Page 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS  
Front Tine Models  
TINES & 1” ShAFT PARTS  
504  
504  
PART #  
1511  
dESCRIPTION  
QTY.  
PART #  
3326  
dESCRIPTION  
QTY.  
BOLT, SFHH 1/4-20 X 7/8”  
9
1
TINE SET, OUTSIDE LEFT  
KEY 3/16 X 1/2”  
1
1
5
1
1
4
9
1
1
4
1
1
1601  
BEARING, TAPERED  
(INCLUDES CONE & RACE)  
3364  
504  
LOCKWASHER, SPRING 5/16”  
CASTING, RIGHT SIDE  
CASTING, LEFT SIDE  
1701  
1810  
3116  
3122  
3179  
3205W  
KEY, HALF MOON 1/4 X 1”  
SNAP RING, EXTERNAL  
GEAR, BRASS 1” ID  
1
2
1
1
1
2
1
1
1
2
56100B  
56101B  
60G56  
67538  
802  
NUT, BI-WAY LOCK 5/16-18  
NUT, NYLOC 1/4”  
SHAFT, DRIVE  
PULLEY, SINGLE GROOVE  
BEARING, SEALED 1” ID  
SCREW, HEX HD 5/16-24 X 3/4”  
WASHER 5/16” ID X 1-5/8” OD  
BOLT, HEX HD 5/16-18 X 1-3/4”  
BEARING, BALL R12  
803  
3310TRAN TRANSMISSION, COMPLETE  
8655  
3322  
3323  
3324  
SHAFT, TINE 1”  
8922  
TINE SET, OUTSIDE RIGHT  
TINE SET, INSIDE  
8924  
SNAP RING, EXTERNAL 3/4”  
Page 22  
800-ꢀ45-6007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ARDISAM  
.com  
Visit www.ardisam.com and discover more innovations that will  
benefit you throughout the year.  
Earthquake, Division of Ardisam, Inc.  
1690 Elm Street; P.O. Box 666  
Cumberland, Wisconsin 54829  
800-345-6007 · Fax (715) 822-2223  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ei Electronics Smoke Alarm Ei 103R User Manual
Extron electronic Stereo Receiver VNS 104 User Manual
Fender Musical Instrument Amplifier PR 241 User Manual
Fisher Paykel Ventilation Hood HC60PCHTX1 User Manual
Fujitsu Switch NC14008 B032RS R User Manual
Fyrnetics Smoke Alarm PE120 User Manual
Gaggenau Cooktop CK 481 6 User Manual
GBC Speaker CC175 User Manual
GE Dryer Accessories DPVH8800GJ User Manual
GE Range 164D2966P079 User Manual