ETI Sound Systems INC Speaker ACT18 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up Your ACT-18 Subwoofer  
The B-52 Pro Audio speakers described in this instruction manual are intended for portable used in which the  
speakers will be placed directly on the floor, stage or a solid platform. The ACT-18 and ACT-18S described in  
this manual should not be suspended or flown. These models are also not intended for fixed installations  
outdoors or in high-moisture areas. Moisture can damage the subwoofer and can cause corrosion of electrical  
contacts.  
Keep speakers out of extended or intense direct sunlight. The subwoofer spider and surround will premature-  
ly dry out and finished surfaces may fade and be damaged by long-term exposure to intense ultra-violet light.  
B-52 Pro-Audio speakers, especially the ACT-18, can produce high-levels of energy. When placed on slippery  
surfaces such as polished wood or smooth tiles, the speaker may move because of its intense bass output.  
Precautions should be taken to ensure the subwoofer does not fall off a stage or raised surface .  
The ACT-18 models include a pole-mounting cup to allow mounting of a full-range speaker above the sub-  
woofer. When installing a pole to mount a full-range speaker above the ACT-18, be sure to observe the follow  
precautions:  
u
Check the pole’s specifications to be certain that it is designed to support the weight on the speaker.  
Observe all safety precautions specified by the stand’s/pole’s manufacturer.  
u
Make sure the pole is placed completely within the receptacle cup both on the subwoofer and the  
full-range speaker.  
u
Route cables so that performers, production crews and audiences will not trip over them and pull the  
speaker over.  
u
Do not attempt to place more than one speaker on a pole designed for a single speaker.  
u
Do not mount a speaker above the subwoofer in windy conditions.  
u
B-52 Pro-Audio recommends that you not lift the speaker above the subwoofer alone.  
Hearing damage, prolonged exposure to excessive SPL  
B-52 Pro-Audio speakers, especially the ACT-18(S) are capable of producing sound pressure levels (SPL) suf-  
ficient to cause permanent hearing damage to performers, production crews or people in the audience.  
Hearing-protection devices (ear-plugs) are recommended. Caution should be taken to avoid extended expo-  
sure to SPL in excess of 90 dBA.  
Amplifier Module Precautions  
Do not attempt to service the ACT-18 by yourself. Refer all servicing to a B-52 Pro-Audio Authorized dealer.  
Service is required when the ACT-18 has had liquid spilled on or inside the subwoofer, objects have fallen onto  
the speaker or it has been damaged in any way, the speaker has been exposed to rain or moisture, does not  
operate normally or has been dropped.  
Keep your ACT-18 amplifier away from sources of heat such as a radiator or intense sunlight. Do not cover  
your ACT-18 amplifier with material that may retain heat, such as a blanket or curtain. Be certain that the vents  
on the panel of the amplifier are clear of all obstructions during operation.  
WARNING – Shock Hazard:  
To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture. Do not operate your  
ACT-18(S) near a pool or other standing water. Do not bypass or defeat the grounding or polarization means  
used on the ACT-18 amplifier. Make sure all blades on the polarized power plug are fully inserted into the power  
source. Ensure the power cord is not stretched, pinched or otherwise abused. Ensure the power cord is rout-  
ed to avoid foot traffic. Your ACT-18 amplifier should be cleaned only with a dry cloth.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING TO KNOW YOUR ACT-18 ACTIVE 18” SUBWOOFER  
PANEL CONTROLS  
11) Level Control: Sets the volume of the subwoofer  
12) Phase Switch: Sets the polarity of the ACT-18.  
13) Power Indicator: The Power indicator lights when the ACT-18 amplifier  
has been turned on and has power.  
14) Protection: Red LED turns on when distortion is audible in the  
amplifier output. This indicates that you should turn the amplifier  
down.  
15) Right & Left Inputs: These inputs are summed and sent to amplifier’s  
Low Pass filter (120 Hz and below).  
16) Right & Left Full-Range Outputs: Send stereo full-range signal  
allowing daisy chaining of additional subwoofers. You do not need to  
y-cable out of your mixer or audio device to get an additional full-  
range signal.  
17) Right & Left High-Pass Outputs: Send stereo high-pass signal (120  
Hz and above) directly to active, full-range speakers or through a rack  
mount amplifier to passive speakers.  
18) External Speaker On/Off Switch: Turns Speakon NL-4 connector  
(and external subwoofer) on and off. When only using the ACT-18, turn  
this switch off. When an external, non-powered subwoofer (ACT-18S)  
is connected, turn this switch on. NEVER turn switch on or off while  
amplifier is turned all the way up.  
19) External Speaker Output: The Speakon NL-4 connector connects  
the amplifier to an external, non-powered subwoofer (ACT-18S). Either  
pins 1+ and 2+ can be used as the positive connection. Either pins 1-  
or 2- can be used as the Negative Connection. External subwoofer  
must be 8 Ohms  
10) ON/OFF Switch: Turns the ACT-18 amplifier on or off. The ACT-18 will  
only turn on when the amplifier detects an audio signal.  
11) Fuse Holder: Houses a fast-resetting 12 amp fuse.  
12) Power Cord Connector: For attachment of the included power cord.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACT-18 DIGITAL AMPLIFIER  
1
4
2
8
7
6
5
3
Full-Range  
High-Pass  
External  
Speaker  
Level  
Protection  
Power  
L
On  
L
Off  
Phase  
Neutrik Pins:  
1 + or 2 + = (+)  
1 - or 2 - = (-)  
180  
0
R
R
9
Outputs  
Sub-Out  
Input  
-
B 52  
N
Digital  
Amplifier  
ACT-18  
Designed by ETI Sound Systems /  
B-52 Pro Audio, Huntington Park, CA  
Model: ACT-18. May be covered by  
one or more patents pending.  
ON  
10  
Power  
OFF  
Fuse  
11  
12 Amp  
12  
WARNING: To reduce the risk or fire or  
CAUTION  
electrical shock do not expose this equipment  
to rain or moisture. Please read instructions  
prior to operation.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
MADE IN U.S.A.  
120 V AC 60 Hz  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your ACT-18 To Active Full-Range Speakers  
(As well as the ACT-18S - Passive 18” subwoofer)  
Connecting Your ACT-18 To Passive Full-Range Speakers  
(As well as the ACT-18S - Passive 18” subwoofer)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Daisy-chaining Your ACT-18 To Additional ACT-18 Subwoofers  
(As well as the ACT-18S - Passive 18” subwoofers)  
WARRANTY INFORMATION  
Thank you for choosing this B-52 Pro-Audio sound product. B-52 manufactures some of the world’s best sounding and most reliable professional speaker sys-  
tems and components. E.T.I. Sound Systems, Inc., manufacturers of B-52, takes great pride in thoroughly testing each B-52 product prior to shipment. Please  
read the warranty terms and conditions below and carefully read the provided Limited Warranty Card for additional terms and conditions.  
LOUDSPEAKER & MID-RANGE COMPONENTS: E.T.I. Sound Systems, Inc. warrants the original purchaser that the B-52 subwoofer will be free from defects  
in material and workmanship for a period of (5) FIVE YEARS from the original purchase date. A dated sales receipt will establish coverage under this warranty.  
This warranty will automatically terminate (5) five years after the original sales date. See provided Limited Warranty Card for additional terms and conditions.  
B-52 AMPLIFIER: E.T.I. Sound Systems, Inc. warrants the original purchaser that the B-52 amplifier will be free from defects in material and workmanship for  
a period of (2) TWO YEARS from the original purchase date. A dated sales receipt will establish coverage under this warranty. This warranty will automatically  
terminate (2) two years after the original sales date. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair  
or replacement as provided above. See provided Limited Warranty Card for additional terms and conditions.  
B-52 CABINETS: E.T.I. Sound Systems, Inc. offers a LIFETIME warranty to the original purchaser that B-52 cabinet’s construction will be free from defects in  
material and workmanship. A dated sales receipt will establish coverage under this warranty. The warranty does not cover service or parts to repair damage  
caused by neglect, abuse, normal wear & tear and cosmetic appearance of the cabinetry not directly attributed to defects in material or workmanship, or serv-  
ice & repair, modifications to the cabinet which has not be authorized or approved by E.T.I. Sound Systems, Inc. If this product is defective in materials or work-  
manship as warranted above, your sole remedy shall be repair or replacement as provided above. See provided Limited Warranty card for additional terms and  
conditions.  
INCIDENTAL OR CONSEQUENTIAL DAMAGE: In no event E.T.I. Sound Systems, Inc. be liable for any incidental or consequential damages arising out of the  
use or inability to use of any B-52 product, even if, E.T.I. Sound Systems, Inc. or a B-52 dealer has been advised of the possibility of such damages, or any other  
claim by any other party. Some States do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply  
to you. This warranty gives you specific legal rights and you may also have other rights that may vary from State to State. See provided Limited Warranty card  
for additional terms and conditions.  
RETURN PROCEDURES: In the unlikely event that a defect should occur, follow the procedure outlined below. Defective products must be shipped together  
with a proof of purchase, freight prepaid and insured to the Authorized B-52 Dealer from whom you purchased the product or directly E.T.I. Sound Systems, Inc.  
If a product must be returned directly to E.T.I. Sound Systems, Inc. for warranty replacement/repair, a Return Authorization Number (RAN) must be obtained  
from our Customer Service Department prior to shipping the product. You may obtain RAN by calling 800-344-4ETI.  
NEVER RETURN THE ENTIRE CABINET - JUST THE DEFECTIVE COMPONENT.  
See provided Limited Warranty card for additional terms and conditions.  
FOR YOUR PROTECTION: Please complete and mail the Purchase Information Card within (10) ten days of the date of purchase so that we may contact you  
directly in the event a safety notification is issued in accordance with the 1972 Consumer Product Safety Act. In addition, we ask that you complete the brief  
questionnaire so me may analyze your answers and in this way, help us evaluate our customer needs. See provided Limited Warranty card for additional terms  
and conditions.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
E.T.I. SOUND SYSTEMS, INC.  
3383 Gage Avenue, Huntington Park, CA, 90255  
Phone: 323-277-4100 Fax: 323-277-4108  
National: 1-800-344-4ETI  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

EAW Speaker MQTD812 User Manual
Electro Voice Automobile Accessories MH640C User Manual
Ernemann Film Camera 15 14 18 User Manual
Extron electronic TV Cables MHRHF 5 User Manual
Fujitsu Printer FTP 631MCL201 User Manual
Gaggia Espresso Maker 4332077000 User Manual
GE Air Conditioner AGF05 User Manual
Geemarc Telephone AMPLI600 User Manual
Generac Portable Generator 004692 0 User Manual
GN Netcom Cordless Telephone ELT 560 User Manual