ETA Systems Power Supply PD8 User Manual

PD8 & PD8L  
Conditioned Power Distribution Unit  
PD8 & PD8L  
Conditioned Power Distribution Unit  
ON / OFF  
CIRCUIT BREAKER  
PROTECTION ON  
EPD8R  
CONDITIONED  
POWER DISTRIBUTION  
ETA SYSTEMS  
A CREATIVE LIGHT AND SOUND COMPANY  
PD8  
ON / OFF  
CIRCUIT BREAKER  
PROTECTION ON  
EPD8LR  
LIGHTS  
CONDITIONED  
POWER DISTRIBUTION  
HIGH  
OFF  
RACK ILLUMINATOR  
CAUTION: Replacement lamp is a standard 120 volt, incandescent lamp.  
ETA SYSTEMS  
LOW  
A CREATIVE LIGHT AND SOUND COMPANY  
PD8L  
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.  
Telephone: 800-321-6699 • Fax: 800-996-3821  
– 1 –  
ETAsys.com  
Specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PD8 & PD8L  
Conditioned Power Distribution Unit  
SPECIFICATIONS  
Height:  
134  
Width:  
19”  
Depth:  
8”  
Weight:  
7 lbs  
Housing Quality:  
Electrical:  
Black Powder Coated Chassis  
120V, 50/60Hz, Single Phase  
15 Amps / unit  
Maximum Amps:  
Maximum Watts:  
Spike/Surge Protection:  
Surge Protection Alarm:  
Response Time:  
Max. Clamping Voltage:  
Max. Spike Current:  
Max. Surge Energy:  
Noise Filter (EMI/RFI) Frequency:  
Attenuation:  
1800 Watts / unit  
Line to Neutral, Neutral to Ground, Line to Ground  
Yes  
< 1 Nanosecond  
330V  
65,000 Amps  
1665 Joules Total (555 per leg)  
150kHz -100MHz  
Up to 68dB  
Certification:  
UL 1449 Listed  
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.  
Telephone: 800-321-6699 • Fax: 800-996-3821  
– 3 –  
ETAsys.com  
Specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PD8 & PD8L  
Conditioned Power Distribution Unit  
LIMITED WARRANTY  
All products manufactured by ETA Systems are warranted to the original dealer/installer, industrial or commercial purchaser to be  
free from defects in material and workmanship and to be in compliance with our published specifications, if any. This warranty  
shall extend from the date of purchase for a period of one year. Additionally, fuses and lamps carry no warranty. ETA Systems will  
solely at its discretion, replace at no charge or repair free of charge defective parts or products when the product has been applied  
and used in accordance with our published operation and installation instructions. We will not be responsible for defects caused by  
improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water  
immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered,  
serviced or installed in other than a workmanlike manner. The original sales invoice should be retained as evidence of purchase under  
the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to ETA  
Systems do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for material and labor  
unless there is included with the returned product(s) a written request for an estimate of repair costs before any non-warranty work is  
performed. In the event of replacement or upon completion of repairs, return shipment will be made with the transportation charges  
collect.  
EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL DAMAGES FOR PERSONAL  
INJURY, ETA SYSTEMS SHALL NOT BE LIABLE IN TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL  
LOSS OR DAMAGE ARISING OUT OF THE INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS  
IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE.  
ETA Systems does not assume, nor does it authorize any other person to assume or extend on its behalf, any other warranty,  
obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.  
SERVICE  
Should your PD8 or PD8L require service, please contact the  
ETA Systems warranty department at  
1-877-689-8055, ext. 277 to obtain an RA number.  
ETA Systems Tech Support can be reached at 1-800-321-6699.  
©2009 ETA Systems All rights reserved. ETA003574 RevA 05/09  
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.  
Telephone: 800-321-6699 • Fax: 800-996-3821  
– 4 –  
ETAsys.com  
Specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eizo Computer Monitor FlexScan L350 User Manual
FilterStream Vacuum Cleaner V2100 User Manual
Fisher Price Automobile Parts B1973 User Manual
Fisher Price Baby Monitor T4838 User Manual
Fujitsu Printer FTP 621MCL201 User Manual
GE Clothes Dryer DCVH680GJBB User Manual
GE Heat Pump AZ61H12DAC User Manual
Gemini Musical Instrument PDM 10 User Manual
GE Monogram Cooktop Halogen Radiant Cooktop User Manual
GE Washer Dryer DCCD330EJ User Manual