Dynex TV DVD Combo DX LTDVD22 09 User Manual

22" LCD TV with DVD Player  
DX-LTDVD22-09  
USER GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Contents  
CHILD SAFETY  
It makes a difference how and where you use  
your flat panel display  
As you enjoy your new product, keep these  
safety tips in mind  
The issue  
The home theater entertainment experience is a growing trend, and larger TVs are popular  
purchases. However, TVs are not always supported on the proper stands or installed  
according to the manufacturer’s recommendations. We and the consumer electronics  
industry are committed to making home entertainment enjoyable and safe.  
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,  
chests, or carts may fall over and cause injury.  
Tune into safety  
One size of TV stand does not fit all. Use only a TV stand  
rated for the weight of your TV.  
Carefully read and understand all enclosed instructions for  
proper use of this product.  
Don’t let children to climb on or play with entertainment  
system furniture and TVs.  
Don’t place TVs on furniture that can easily be used as  
steps, such as a chest of drawers.  
Remember that children can become excited while watching  
a program, especially on a “larger-than-life” TV. Make sure  
that you place or install the TV where it cannot be pushed,  
pulled over, or knocked down.  
Make sure that you route all cords and cables so that they  
cannot be pulled or grabbed by curious children.  
Wall mounting  
If you decide to wall mount your TV, always:  
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your  
TV and that has been recommended by this TV manufacturer, listed in this manual, or  
otherwise listed by an independent laboratory (such as UL, CSA, or ETL) as suitable for  
your TV.  
Follow all instructions supplied by the TV and wall mount manufacturers.  
If you have any doubts about your ability to safely wall mount your TV, get help from a  
professional installer.  
Make sure that the wall where you are mounting the TV is  
appropriate. Some wall mounts are not designed to be mounted  
to walls backed with steel studs or cinder blocks. If you are  
unsure, ask a professional installer.  
TVs can be heavy. At least two people are required for safe wall mount installation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Important safety instructions  
10) Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point where  
they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid  
injury from tip-over.  
CAUTION:TO REDUCE THE RISK OF  
ELECTRIC SHOCK, DO NOT REMOVE  
COVER (OR BACK). NO USER-SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL.  
13) Unplug this apparatus during lightning storms or  
Warning: To reduce the risk of electric shock, do not remove the cover or  
back. No user serviceable parts inside. Refer servicing to qualified  
service personnel.  
when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is  
required when the apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has been  
dropped.  
15) Apparatus should not be exposed to dripping or splashing, and  
objects filled with liquids, such as vases, should not be placed on  
the apparatus.  
Warning: To reduce the risk of fire or electric shock, do not expose your TV  
to rain or moisture.  
Warning: To prevent electric shock, match the wide blade on the power  
cord plug to the wide slot on an electric outlet. If the plug does not fit,  
consult a licensed electrician to replace the obsolete outlet. Do not  
modify the power cord plug, or you will defeat this safety feature.  
This symbol indicates that dangerous  
voltage constituting a risk of electric shock is  
present within your TV. This label is located  
on the back of your TV.  
Location of the required marking  
The rating sheet and the safety caution are on the rear of the unit.  
This symbol indicates that there are  
important operating and maintenance  
instructions in the literature accompanying  
your TV.  
Warning: Your TV contains a fluorescent lamp containing a small amount  
of mercury. Disposal of these materials may be regulated for  
environmental reasons. For disposal or recycling information, contact  
your local authorities or the Electronic Industries Alliance at  
CAUTION - Laser safety:  
Certification: Complies with FDA radiation performance  
standards, 21 CFR Subchapter J  
This digital video player employs a laser system. To ensure proper use of  
this product, please read this owner's manual carefully and retain for  
future reference. Should the unit require maintenance, contact an  
authorized service location-see service procedure.  
Use of controls, adjustments or the performance of procedures other  
than those specified herein may result in hazardous radiation exposure.  
to prevent direct exposure to the laser beam, do not try to open the  
enclosure. Radiation may be present when the enclosure is opened. Do  
not stare into the beam.  
Important safety instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type  
plug. A polarized plug has two blades with one wider than the other.  
A grounding type plug has two blades and a third grounding prong.  
The wide blade or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5
Features  
Left side  
Features  
Accessories  
• Remote control  
• AAA batteries (2)  
• AC power cord  
• User Guide  
1
2
Note: Cables are not supplied. You can purchase cables at most electronics  
8
stores.  
Front  
3
4
5
6
7
#
Component  
Description  
1
Press to eject the disc from the DVD  
player.  
EJECT  
2
3
VOLUME + /–  
In TV or DVD modes, press to increase  
(+) or decrease (–) the volume.  
In menu mode, press to navigate the  
menus and select settings.  
2
1
In TV mode, press to tune to the next  
higher channel in the channel list. For  
channel list, see “Memorizing  
playback.  
In menu mode, press to select a  
menu.  
CHANNEL  
(PLAY)  
/
#
Component  
Description  
1
Remote control  
sensor  
Receives signals from the remote  
control. Do not block.  
2
Power indicator LED Lights green when your TV is turned  
on.  
4
In TV mode, press to tune to the next  
lower channel in the channel list. For  
channel list, see “Memorizing  
In DVD mode, press to stop playback.  
In menu mode, press to select a  
menu.  
CHANNEL  
(STOP)  
/
5
6
MENU  
Press to open the on-screen menus.  
INPUT/ENTER  
In TV or DVD mode, press to select  
the video input source.  
In menu mode, press to confirm a  
selection.  
7
8
POWER  
Press to turn your TV on or off.  
Disc slot  
Insert a disc in this slot to start  
playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
6
Features  
Back  
Remote control  
19  
1
20  
21  
22  
VGA  
2
3
23  
24  
25  
2
4
5
6
1
VGA  
4
6
3
5
7
9
8
7
26  
27  
8
9
28  
30  
32  
34  
36  
#
Jack  
Description  
29  
31  
33  
35  
37  
10  
1
COMPONENT/  
AUDIO IN  
Connect the component output  
cables (Y, Pb, Pr) and audio cables  
(L/R) from an external AV source to  
these jacks.  
11  
12  
13  
14  
2
VIDEO (Composite)/ Connect the composite video output  
S-VIDEO/AUDIO IN  
cable (Video) or the S-video output  
cable, and audio cables (L/R) from an  
external AV source to these jacks.  
15  
16  
17  
18  
38  
3
4
5
AC INPUT  
Plug the power cord into this socket.  
Plug your headphones into this jack.  
Headphone jack  
VGA IN  
Connect the VGA cable from a  
computer to this port.  
6
7
PC/DVI AUDIO IN  
HDMI/DVI IN  
Connect the audio output from a  
computer or DVI source to this jack.  
#
Button  
Description  
Connect an HDMI or DVI device to  
this jack. To connect a DVI device, you  
need to connect an HDMI-DVI cable,  
and connect an audio cable to the  
AUDIO IN L/R jacks.  
1
2
3
TV  
Press to change to TV mode.  
Press to turn your TV on or off.  
POWER  
Numbers  
Press to enter a channel number. If  
you want to select a digital  
sub-channel, press to select the  
sub-channel.  
8
9
DIGITAL AUDIO OUT Connect a digital audio device to this  
(COAXIAL)  
jack.  
RF (ANT) IN  
Connect a TV antenna or cable TV  
cable to this jack.  
4
SETUP/TV MENU  
In TV mode, press to open the menus.  
In DVD mode, press to open the  
initial setup mode.  
5
6
7
Press to navigate in the on-screen  
menu.  
ENTER  
EXIT  
Press to confirm option settings in  
the on-screen menu.  
Press to exit the on-screen menus or  
reset the information on a menu to  
the previous settings.  
8
Press to fast reverse DVD or CD  
playback.  
SEARCH  
9
Press to pause playback of a disc.  
PAUSE/STILL  
SKIP  
10  
Press to skip back a chapter (DVD) or  
track (CD).  
11  
SUBTITLE  
Press to cycle through the available  
subtitle languages on a DVD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
7
Setting up your TV  
#
Button  
Description  
Setting up your TV  
12  
Press to slow reverse playback of a  
DVD.  
SLOW  
Installing remote control batteries  
13  
14  
RETURN  
AUDIO  
Press to exit the DVD setup menus.  
To install remote control batteries:  
1
Open the battery compartment.  
Press to cycle through the languages  
available on a DVD.  
15  
16  
ZOOM  
Press to zoom in the picture.  
MARKER  
Press to open a marker dialog box,  
which lets you mark three scenes on  
a DVD to access directly.  
17  
18  
TITLE  
In DVD mode, press to open the top  
menu.  
2
Insert two AAA batteries into the battery compartment. Make  
sure that the + and – symbols on the batteries match the + and  
– symbols in the battery compartment.  
MENU  
In DVD mode, press to open the DVD  
setup menu.  
19  
20  
DVD  
Press to change to DVD mode.  
INPUT  
Press to open the Input Source Select  
menu.  
21  
Press to eject the disc from the DVD  
player.  
EJECT  
22  
23  
SLEEP  
ZOOM  
Press to set the sleep timer.  
3
Close the battery compartment.  
Press to open the Picture Size menu  
where you can choose the size of the  
picture.  
24  
25  
Press to access TV digital  
sub-channels.  
DISPLAY  
For TV or DVD, press to display  
information about the TV program or  
the DVD playing.  
Notes:  
Make sure that you match the + and – symbols on the batteries with the  
26  
27  
28  
RECALL  
In TV mode, press to switch between  
the current and last channel viewed.  
symbols in the battery compartment.  
Do not mix different types of batteries or old and new batteries.  
If you do not intend to use the remote control for a extended period of  
time, remove the batteries to prevent leakage.  
Do not try to recharge batteries non-rechargable batteries. They may  
overheat and rupture.  
Press to begin playback of a DVD or  
CD.  
PLAY  
Press to fast forward DVD or CD  
playback.  
SEARCH  
29  
30  
In DVD mode, press to stop playback.  
STOP  
SKIP  
Using the remote control  
Press to skip forward a chapter (DVD)  
or track (CD).  
To use the remote control:  
• Point the remote control directly at your TV, within a 60° angle  
horizontally (30° to either side) and within 30° vertically of the  
remote control sensor on the front of your TV, and within 15 feet  
of your TV.  
31  
32  
33  
REPEAT  
SLOW  
A-B  
Press to select the playback mode.  
Press to slow the playback of a DVD.  
Press to repeat a specific portion of a  
DVD or CD. Press once to set the  
beginning point, then press again to  
set the end point.  
34  
35  
36  
37  
38  
ANGLE  
Press to view a DVD from an alternate  
angle (if available).  
T.SEARCH  
MUTE  
Press to find a specific title, chapter,  
or time on a DVD.  
Press to mute the sound. Press again  
to restore the sound.  
VOL +/–  
Press to increase (+) or decrease (-)  
the volume.  
Press to go to the next or previous  
channel in the TV channel list.  
CH  
/
Approximately 15 feet  
Caution  
Do not expose the remote control to liquids, direct sunlight, or shock.  
Notes  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
8
Setting up your TV  
Objects between the remote control and the remote control sensor may  
block the remote control signal.  
The range of the remote control may be diminished if direct sunlight or  
other strong light is shining at the remote control sensor. In this case,  
change the angle of the lighting, move your TV, or operate the remote  
control closer to the remote control sensor.  
To connect a combination VHF/UHF antenna with separate VHF and UHF  
300 ohm twin-lead wires:  
1
2
3
Connect the UHF 300 ohm twin-lead wire to the combiner (not  
supplied).  
Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm  
matching transformer.  
Attach the transformer to the combiner, then attach the  
combiner to the ANT. jack on the back of your TV.  
Connecting the power  
Notes:  
Make sure to insert the cord securely at both the LCD TV and the power  
Connecting a cable or satellite box  
outlet.  
Note: Installation methods may vary depending on the type of cable or  
satellite box. Contact your cable or satellite provider for more  
information.  
The AC cord has a grounding-type AC line plug. If the supplied AC cord does  
not match your AC outlet, contact a qualified electrician. Do not defeat  
the purpose of a grounded plug.  
To connect a cable or satellite box:  
To connect power:  
1
Connect a 75 ohm cable to the cable or satellite TV wall jack, then  
connect the other end to the Antenna IN jack on the cable or  
satellite TV box.  
1
2
Plug the AC cord into the TV’s AC IN jack.  
Connect the AC cord into an AC power outlet.  
Coaxial cable  
Coaxial cable  
Cable or satellite box  
Antenna jack  
2
Connect a 75 ohm coaxial cable to the RF OUT jack on the cable  
or satellite TV box, then connect the other end to the ANT. jack  
on the back of your TV.  
Warnings:  
Do not connect this TV to power using any device other than the supplied  
AC cord. This could cause fire, electrical shock, or damage.  
Do not use with a voltage other than the power voltage displayed on the  
marking label of the TV. This could cause fire, electrical shock, or  
damage.  
An alternate method  
If you subscribe to a cable TV service in which basic channels are  
unscrambled and premium channels require the use of a  
converter/descrambler box, you may want to use a signal splitter and  
an A/B switch box (available from the cable TV company or an  
electronics supply store). Use the connections shown below. With the  
switch in the “B” position you can directly tune any nonscrambled  
channels on your TV. With the switch in the “A” position, tune your TV to  
the output of the converter/descrambler box (usually channel 3 or 4)  
and use the converter/descrambler box to tune scrambled channels.  
Do not plug or unplug the plug when your hands are wet. This may cause  
electrical shock.  
Cautions:  
When this TV is not used for a long time, (such as, away on a trip) in the  
interest of safety, make sure that you unplug it from the AC outlet.  
If you need to replace the supplied AC c cord, contact customer service.  
Connecting an antenna or basic cable  
To connect an antenna or basic cable (no cable box):  
• Connect one end of a 75 ohm coaxial cable to the antenna or  
basic cable wall jack, then connect the other end of the cable to  
the ANT. jack on the back of your TV.  
Cable or satellite box  
Coaxial  
cable  
Coaxial  
cable  
A/B  
switch  
Splitter  
Antenna jack  
Coaxial cable  
Antenna jack  
Making audio and video connections  
Connecting a composite video device  
To connect a composite video device:  
Antenna jack  
300-75 ohm matching  
transformer  
1
Connect an AV cable to the VIDEO OUT jack on the external  
device (such as a VCR), then connect the other end of the cable to  
the VIDEO IN jack on the back of your TV.  
Back of TV  
VCR  
Composite video cable  
and audio L/R cables (not  
provided)  
Notes:  
Always unplug the coaxial cable when you move your TV.  
If you want to switch between antenna and cable, install an antenna  
selector.  
2
Connect an RCA audio cable to the AUDIO L and R jacks on the  
video device, then connect the other end of the cable to the  
audio portion of the AUDIO L (MONO) and R IN jacks on the back  
of your TV.  
If you need help connecting cable TV, contact your cable TV provider.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
9
Setting up your TV  
Notes:  
Connecting a component video device  
To connect a component video device:  
When using HDMI/DVI to connect your HDMI or DVI devices, you must  
select the corresponding audio input source (HDMI or DVI) on the  
If you connect an external component (such as a cable box or satellite  
1
Connect a component video cable to the COMPONENT VIDEO  
OUT (Y, Pb, and Pr) jacks on the component device, then connect  
the other end of the cable to the COMPONENT IN jacks on the  
back of your TV.  
receiver) to this LCD TV using an HDMI cable or a DVI-to-HDMI cable,  
the image will not display if the output resolution of the component is  
set to 480i. To receive the picture, you must change the output  
resolution on the external component.  
Back of TV  
Component video device  
Audio cables  
(not provided)  
If you need further instruction, contact the manufacturer of the external  
Component video cable  
(not provided)  
Y
component.  
P
B
P
R
Connecting a camcorder, game, or VCR  
2
Connect an RCA audio cable to the AUDIO L and R jacks on the  
component video device, then connect the other end of the cable  
to the AUDIO L (MONO) and R jacks on the back of your TV. Make  
sure that you connect the audio cable to the audio jacks  
associated with the component jacks you connected the  
component video cable to.  
To connect a camcorder, game, or VCR:  
1
Connect one end of a video cable to the VIDEO OUT jack on the  
camcorder, game, or VCR, then connect the other end to the  
VIDEO IN jack on the back of your TV.  
Camcorder  
Game  
Note: Your TV accepts 480i, 480p, 720p, and 1080i video signals.  
Video cable (not provided)  
Audio cable (not provided)  
or  
Connecting an S-Video device  
To connect an S-Video device:  
2
Connect one end of an audio cable to the AUDIO OUT jacks on  
the camcorder, camera, or VCR, then the other end of the cable to  
AUDIO L/R IN jacks on the back of your TV. Make sure that you  
connect the audio cable to the audio jacks associated with the  
video jack you connected the video cable to.  
1
Connect one end of an S-Video cable to the S-VIDEO OUT jack on  
the S-Video device, then connect the other end of the cable to the  
S-VIDEO IN jack on the back of your TV.  
S-Video device  
Back of TV  
S-Video cable (not provided)  
Audio cables (not provided)  
Connecting a digital audio device  
To connect a digital audio device:  
• Connect one end of a digital audio coaxial cable to the DIGITAL  
AUDIO IN jack on the audio device, then connect the other end of  
the cable to the COAXIAL DIGITAL AUDIO OUTPUT jack on the  
back of your TV.  
2
Connect one end of an audio cable to the AUDIO OUT L/R jacks  
on the S-Video device, then connect the other end of the cable to  
the AUDIO L (MONO) and R jacks that are near the S-Video jack  
you connected the S-Video cable to.  
Coaxial digital audio  
output jack  
Note: If you connect an S-Video device and a standard video device to the  
Back of TV  
TV, the S-Video device has priority.  
Right  
front  
speaker  
VGA  
Subwoofer  
Connecting an HDMI or DVI device  
Left  
front  
speaker  
To connect an HDMI or DVI device:  
TV/DVD  
• Connect one end of an HDMI cable to the HDMI OUT jack on the  
HDMI device, then connect the other end of the cable to the  
HDMI/DVI IN jack on the back of your TV.  
• When you connect to a DVI device with an HDMI-to-DVI adapter  
cable, it transfers only video signal. Separate analog audio cords  
required.  
Coaxial digital  
audio cable (not  
provided)  
To coaxial digital  
audio input jack  
Center  
speaker  
Right  
rear  
speaker  
Left rear  
speaker  
Back of TV  
VGA  
Digital audio device  
(with built-in digital  
surround decoder)  
HDMI cable (type A connector)  
(not provided)  
HDMI device  
HDMI-to-DVI adapter cable (HDMI  
type A connector) (not provided)  
DVI device  
Audio cable (not provided)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
10  
Using your TV  
Note: When your TV does not receive a signal and you do not press any  
Connecting a computer  
buttons for 15 minutes, your TV goes into Standby mode.  
The TV can operate as the computer monitor.  
3
Adjust the volume by pressing VOL+ or -. You can also press  
MUTE to turn off the sound. The TV’s sound turns off and “Mute”  
appears on the screen. The sound can be turned back on by  
pressing this button again or the VOL + or .  
Set the signal type to the appropriate position (see “To select the  
signal type:” on page 11).  
Select a channel by pressing CH or . The channel  
automatically stops at the next channel set into memory. See  
“Memorizing channels” on page 11.  
To connect a computer:  
1
Connect one end of a VGA cable to the VGA jack on the computer,  
then connect the other end of the cable to the VGA IN jack on the  
back of your TV.  
4
5
Back of TV  
VGA  
Computer  
- OR -  
Select a channel by pressing the number buttons (0-9). (If you  
press only the channel number, channel selection is delayed for a  
few seconds.)  
Mini audio cable  
VGA cable  
To select analog channels:  
• 1-9: Press 1-9 as needed. For example, to select channel 2,  
press 2.  
2
Connect one end of a mini-plug audio cable to the  
AUDIO LINE OUT jack on the computer, then connect the other  
end of the cable to the PC/DVI AUDIO IN jack on the back of your  
TV.  
Press INPUT SELECT on the remote control to select PC mode.  
Turn on the computer.  
To return to normal mode, press INPUT again and select another  
mode.  
Notes:  
• 10-99: Press the two digits, in order. For example, to select  
channel 12, press 1, 2.  
• 100-125: Press the three digits, in order. Example, to select  
channel 120, press 1, 2, 0.  
To select digital channels:  
Press the first three digits, then press the – button, followed by  
the remaining number. For example, to select channel 015-001,  
press 0, 1, 5, , 0, 0, 1.  
3
4
• If a channel with only audio content is selected, “Audio only”  
is displayed on the screen.  
The on-screen displays have a different appearance in PC mode than in TV  
mode.  
• If a channel with a weak digital signal is selected, “Digital  
channel signal strength is low” is displayed on the screen.  
• The same program may be available on either an analog  
channel or a digital channel. You can choose to watch either  
format.  
If there is no video signal from the computer when the TV is in PC mode,  
“No signal” appears on the TV screen.  
Refresh  
rate  
Mode  
Resolution  
• If a channel to which you have not subscribed is selected,  
“Digital channel is encrypted” is displayed on the screen.  
VGA  
640 × 480  
720 × 400  
800 × 600  
1024 × 768  
1280 × 768  
1280 × 720  
1360 × 768  
60 Hz  
70 Hz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
VGA  
Air  
Cable  
SVGA  
XGA  
VHF 2-13  
VHF 2-13  
UHF 14-69 STD/HRC/IRC  
WXGA  
WXGA  
WXGA  
14-36  
37-59  
60-85  
86-94  
95-99  
(A) (W)  
(AA) (WW)  
(AAA) (ZZZ)  
(86) (94)  
(A-5) (A-1)  
Note: This TV does not support Plug and Play connection to PC. Also, the  
100-125 (100) (125)  
PC may need to be set for proper resolution, based on above chart.  
01  
(5A)  
Notes:  
If a channel with no broadcast is selected, the sound is automatically  
muted.  
Using your TV  
It may take a few seconds for a digital channel picture to appear on the  
screen after being selected.  
About the symbol  
6
7
Select the video input source by pressing INPUT, then press or  
or the corresponding number buttons (0-5), then press  
ENTER. You can select TV, Video, Component, HDMI, PC, or  
DVD, depending on which input jacks you used to connect your  
devices and which devices are connected.  
Press DISPLAY to display information about the program on the  
screen.  
• Digital information includes channel number, channel label  
(if preset), broadcast program name, V-chip rating, signal  
type, sleep timer, audio language, program guide, picture  
size, and resolution. Analog information includes channel  
The symbol may appear on your TV display during operation and  
indicates that the function is not permitted by your player or specific  
media.  
Turning your TV on or off  
To use your TV:  
1
2
Plug in your TV (see “Connecting the power” on page 8).  
Press POWER.  
Warning: When you press POWER to turn off your TV, your TV goes into  
Standby mode. It is still receiving electrical power. To completely  
disconnect power, unplug the power cord.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
11  
Using your TV  
number, channel label (if preset), V-chip rating, signal type,  
sleep timer, picture size, audio information (stereo or SAP),  
and resolution.  
4
Press SETUP/TV MENU. The initial on-screen menu opens.  
Main Menu  
Press DISPLAY again to clear the display, or wait a few seconds  
and the TV returns to normal operation automatically.  
Press RECALL to go back to the last channel you were watching,  
and press RECALL again to return to the original channel.  
Press SLEEP on the remote control to set the TV to turn off after a  
specified interval. The interval increases with each press of the  
SLEEP button (Off, 0h 5m, 0h 10m, 0h 15m, 0h 30m,..., 4h  
0m). After the sleep timer is programmed, the display appears  
briefly to remind you that the sleep timer is operating. To confirm  
the sleep timer setting, press SLEEP and the remaining time is  
displayed for a few seconds. To cancel the sleep timer, press  
SLEEP repeatedly until the display turns to Off..  
Picture  
Audio  
8
9
>>  
Channel  
Lock  
Setup  
ENTER :Set  
: Select  
5
6
Press or to select Channel, then press or ENTER.  
Press or to select Auto Ch Memory, then press or  
ENTER. The Auto Ch Memory menu opens.  
Setting up for the first time  
Auto Ch Memory  
The first time you turn on your TV, you need to select a language for the  
on-screen menus and scan for available channels.  
Signal Type  
Automatic Search  
Cable  
Start  
Setting the on-screen language  
To set the on-screen language:  
1
Make sure that your TV is plugged in and connected to an  
antenna, cable TV, or satellite TV.  
2
Press POWER. You may have to wait a few seconds for your TV to  
initialize.  
3
4
5
Press TV to select TV mode.  
Press SETUP/TV MENU. The initial on-screen menu opens.  
Press or to select Setup, then press or ENTER. The Setup  
menu opens.  
: Adjust  
: Select  
7
8
Press or to highlight Signal Type, then press or to  
select Air or Cable.  
Press EXIT to return to normal viewing.  
Setup  
To automatically scan for and memorize channels:  
1
Make sure that your TV is plugged in and connected to an  
antenna, cable TV, or satellite TV.  
Press POWER. You may have to wait a few seconds for your TV to  
Closed Caption  
Language  
Video Label  
Backlight  
>>  
English  
>>  
2
initialize.  
16  
3
4
Press TV to select TV mode.  
Press SETUP/TV MENU. The initial on-screen menu opens.  
Auto Shut Off  
Reset  
Off  
>>  
Main Menu  
: Adjust  
: Select  
Picture  
Audio  
Note: When you press SETUP/TV MENU the first time after purchasing  
this TV, the above screen opens automatically.  
>>  
Channel  
Lock  
6
7
Press or to select Language.  
Press or to select English, French (Français), or Spanish  
(Español).  
Setup  
8
Press EXIT/CANCEL to return to normal viewing.  
Memorizing channels  
ENTER :Set  
: Select  
This TV is equipped with a channel memory feature which lets you skip  
up or down to the next channel set into memory. Before selecting  
channels in this manner, they must be programmed into the TV’s  
memory. To use this TV with an antenna, set the Signal Type option to  
the Air mode. When shipped from the factory, this menu option is in  
the Cable mode.  
5
Press or to select Channel, then press or ENTER.  
To select the signal type:  
1
2
3
Make sure that your TV is plugged in and connected to an  
antenna, cable TV, or satellite TV.  
Press POWER. You may have to wait a few seconds for your TV to  
initialize.  
Press TV to select TV mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
12  
Using your TV  
6
Press or to select Auto Ch Memory, then press or  
ENTER. The Auto Ch Memory menu opens.  
4
Press or to select Add/Delete, then press or ENTER. The  
Add/Delete menu opens.  
Auto Ch Memory  
Add/Delete  
Signal Type  
Automatic Search  
Cable  
Stop  
Adding Channel  
Add/Delete  
Clear All  
>>  
>>  
>>  
Analog Channel Found : 16  
Digital Channel Found : 0  
ENTER:Cancel  
: Select  
: Select  
ENTER:Set  
7
Press or to highlight Automatic Search, then press or  
ENTER.  
The TV begins memorizing all of the channels available in your  
area. It may take about 5 minutes to complete memorizing  
digital cable channels. Depending on the reception condition, a  
bar display may not advance for several minutes.  
5
6
Press or to highlight Adding Channel, then press or  
ENTER. The new channel is added to the channel memory.  
Press EXIT to return to normal viewing.  
Deleting channels  
You can select a channel that you want to delete from the channel list.  
To delete a channel from the channel list:  
Notes:  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
Memorizing channels is best accomplished during evening “Primetime”  
hours, because more stations are broadcasting digital signals at that  
time. Channel memorization can only be accomplished while a station  
is broadcasting a digital signal.  
If you are unsure of the digital channels available in your area, you can  
Zip code.  
New digital channels may be added to your area periodically. We  
recommend that you perform the “Automatic Search” procedure  
regularly.  
Main Menu  
Picture  
Audio  
>>  
Channel  
Lock  
Setup  
All channel labels are cleared when you automatically scan for channels.  
Adding channels  
ENTER :Set  
: Select  
If you find a new digital channel you like, you can add it to the channel  
memory.  
2
3
Press or to select Channel, then press or ENTER.  
Press or to select Add/Delete, then press or ENTER. The  
To add a new channel to memory:  
1
2
In TV mode, tune to the new channel.  
Press SETUP/TV MENU. The initial on-screen menu opens.  
Add/Delete menu opens.  
Add/Delete  
Main Menu  
Adding Channel  
Add/Delete  
Clear All  
>>  
>>  
>>  
Picture  
Audio  
>>  
Channel  
Lock  
Setup  
: Select  
ENTER:Set  
ENTER :Set  
: Select  
3
Press or to select Channel, then press or ENTER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Changing the TV settings  
4
Press or to highlight Add/Delete, then press or ENTER.  
Changing the TV settings  
Labeling the channels  
The Add/Delete menu opens.  
Add/Delete  
Channel labels appear with the channel number display each time you  
turn on the TV, select a channel, or press DISPLAY. You can choose any  
four characters to identify a channel.  
CH  
Signal  
2
3
Analog  
Analog  
Digital  
Digital  
Analog  
Add  
Add  
To label a channel:  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
3-001  
3-002  
4
Delete  
Add  
Main Menu  
Delete  
Picture  
Audio  
: Adjust  
: Select  
>>  
Channel  
Lock  
5
Press or to select the channel you want to delete, then  
press or to select Delete.  
Setup  
6
7
Repeat Steps 4 and 5 to select other channels you want to delete.  
Press EXIT to return to normal viewing.  
ENTER :Set  
: Select  
Deleting all channels from channel memory  
You can delete all channels from the channel list.  
To delete all channels from the channel list:  
2
3
Press or to select Channel, then press or ENTER.  
Press or to select Ch Label, then press or ENTER.  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
The Ch Label menu opens.  
Main Menu  
Ch Label  
Picture  
Audio  
Channel Number  
Ch Label  
15-1  
>>  
>>  
Channel  
Lock  
Label Clear  
Setup  
ENTER :Set  
: Select  
: Adjust  
: Select  
2
3
Press or to select Channel, then press or ENTER.  
Press or to select Add/Delete, then press or ENTER.  
The Add/Delete menu opens.  
4
Press or to select the channel you want to label, then  
press  
.
Ch Label  
Add/Delete  
Channel Number  
Ch Label  
15-1  
A
Adding Channel  
Add/Delete  
Clear All  
>>  
>>  
>>  
Label Clear  
>>  
: Adjust  
ENTER:Set  
: Select  
: Select  
ENTER:Set  
5
6
7
8
Press or repeatedly until the first character of the channel  
4
5
Press or to highlight Clear All, then press or ENTER.  
label you want appears in the first space, then press ENTER.  
All channels are cleared from channel memory.  
Repeat Step 5 until you have entered all four characters of the  
channel label.  
When you finish entering the channel label, press EXIT to return  
to normal viewing.  
Repeat Steps 4 through 7 for any additional channels you want to  
label. You can label all memorized channels.  
Press EXIT to return to normal viewing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
14  
Changing the TV settings  
To delete a channel label:  
Labeling video inputs  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
To label video inputs:  
Main Menu  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
Picture  
Audio  
Main Menu  
Picture  
Audio  
Channel  
Lock  
>>  
Channel  
Lock  
Setup  
>>  
Setup  
ENTER :Set  
: Select  
2
3
Press or to select Channel, then press or ENTER.  
Press or to select Ch Label, then press or ENTER.  
The Ch Label menu opens.  
ENTER :Set  
: Select  
2
Press or to select Setup, then press or ENTER.  
The Setup menu opens.  
Ch Label  
Setup  
Channel Number  
Ch Label  
15-1  
>>  
Closed Caption  
Language  
Video Label  
Backlight  
>>  
English  
>>  
Label Clear  
16  
Auto Shut O  
Reset  
Off  
>>  
: Adjust  
: Select  
: Select  
ENTER : Set  
4
Press or to select the channel from which you want to  
delete the label, then press . The Ch Label menu opens.  
3
Press or to select Video Label, then press or ENTER.  
The Video Label menu opens.  
Ch Label  
Video Label  
Channel Number  
Ch Label  
15-1  
A
Video  
-
Component  
HDMI  
-
Label Clear  
>>  
-
ENTER:Set  
: Select  
: Adjust  
: Select  
5
6
Press or to highlight Label Clear, then press or ENTER.  
4
5
Press or to select the input which you want to label.  
Press or to select the label you want for that input.  
Options include:  
The channel label is deleted.  
When you finish deleting the channel label, press EXIT to return  
to normal viewing.  
VCR—Video cassette recorder  
DVD—DVD video  
DTV—Digital TV set-top box  
SAT—Satellite box  
CBL—Cable box  
HD—HDMI device (only for HDMI inputs)  
When you finish labeling the video input, press EXIT to return to  
normal viewing.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
15  
Changing the TV settings  
5
Press or to select TV Rating or Movie Rating, then press  
or ENTER.  
If you are setting the TV Rating, the following screen opens:  
Setting parental controls (V-chip)  
You can set an age limitation on your TV to restrict children from  
viewing or hearing violent scenes or pictures that you choose to  
exclude. The restriction applies to “TV Rating” and “Movie Rating,” if  
this data is transmitted. You may set this restriction separately. To use  
the V-chip feature, you must set and use a password.  
To set a password:  
TV Rating  
ALL  
D
L
S
V
FV  
TV-Y  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
TV-Y7  
TV-G  
Main Menu  
TV-PG  
TV-14  
TV-MA  
Picture  
Audio  
Channel  
ENTER:Set  
: Select  
>>  
Lock  
Set the following TV ratings based on the age:  
Setup  
TV-Y—All children  
TV-Y7—7 years old and above  
TV-G—General audiences  
TV-PG—Parental guidance suggested  
TV-14—14 years old and above  
TV-MA—17 years old and above  
Set the following TV ratings based on genre:  
ENTER :Set  
: Select  
2
Press or to select Lock, then press or ENTER. The  
Password screen opens.  
ALL—All  
Lock  
D—Dialogue  
L—Language  
Password  
* * * *  
S—Sex  
V—Violence  
FV—Fantasy Violence  
6
If you are setting the Movie Rating, the following screen opens:  
Movie Rating  
G
[0-9] : Select  
ENTER:Set  
PG  
PG-13  
R
3
4
Select and enter your password using the number buttons (0-9),  
then press ENTER. Asterisks (*) appear on the screen instead of  
the numbers you enter.  
When the confirmation screen opens, re-enter the same  
password, then press ENTER again. Your password is now set.  
NC-17  
X
Notes:  
: Select  
ENTER:Set  
If you forget the password, contact Customer Service for assistance.  
Your original remote control will be required. To avoid forgetting the  
password, write it down and keep in a safe place.  
Set the following movie ratings based on the age:  
G—All ages  
PG—Parental guidance  
To set the parental controls (V-Chip):  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
PG-13—Parental guidance for children under 13 years old  
R—Parental guidance for children under 17 years old  
NC-17—17 years old and above  
X—Adults only  
Main Menu  
Picture  
7
8
Press  
,
,
, or to select the desired rating, then press  
Audio  
Channel  
Lock  
ENTER.  
Press EXIT to return to normal viewing.  
>>  
When a program is received that is blocked by the V-Chip, press  
MUTE, then enter your password. The protection is temporarily  
be overridden. If the TV is turned off or the channel is changed,  
the V-chip restriction will be reactivated.  
Setup  
Note:  
ENTER :Set  
: Select  
The V-chip feature is activated only on programs and input sources that  
2
3
4
Press or to select Lock, then press or ENTER. The  
Password screen opens.  
Enter your password using the number buttons (0-9), then press  
ENTER. The Lock menu opens.  
Press or to select V-Chip Set, then press or to select  
ON.  
include a rating signal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
16  
Changing the TV settings  
To change your password:  
2
Press or to select Lock, then press or ENTER. The  
Password screen opens.  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
Lock  
Main Menu  
Password  
Picture  
Audio  
* * * *  
Channel  
>>  
Lock  
Setup  
[0-9] : Select  
ENTER:Set  
ENTER :Set  
: Select  
3
4
Enter your password using the number buttons (0-9), then press  
ENTER. The Lock menu opens.  
Press or to select V-Chip Set (DTV), then press or  
ENTER. If your TV does not have the new rating system, it begins  
downloading the new rating system. This may take several  
minutes to complete.  
2
Press or to select Lock, then press or ENTER. The  
Password screen opens.  
Lock  
Password  
* * * *  
5
Set your preferred level of control using the new rating system.  
Notes:  
You can only download the additional V-chip rating system when your TV  
is receiving a digital signal.  
The V-Chip rating information and system are not determined or  
controlled by the TV.  
The standard V-chip rating system is available whether your TV is  
receiving a digital signal or not. It blocks both analog and digital  
programs.  
[0-9] : Select  
ENTER:Set  
3
4
5
6
Enter your password using the number buttons (0-9), then press  
ENTER. The Lock menu opens.  
Press or to select Change Password, then press or  
ENTER. The Change Password screen opens.  
Enter your new password using the number buttons (0-9), then  
press ENTER.  
When the confirmation screen opens, re-enter the same  
password, then press ENTER again. Your password is now  
changed.  
The downloadable V-chip rating system is an evolving technology, and  
availability, content, and format may vary.  
Using closed captioning  
This television has the capability to decode and display closed  
captioned television programs. Closed captioning displays text on the  
screen for hearing impaired viewers or it can translate and display text  
in another language.  
Captions—This closed caption mode displays text on the screen  
in English or another language. Generally, closed captions in  
English are transmitted on C1 and closed captions in other  
languages are transmitted on C2.  
Downloading an additional V-chip rating system  
As a supplement to the standard V-chip rating system, your television  
will be able to download an additional rating system, if such a system  
becomes available in the future.  
Text—This closed caption mode usually fills half of the screen  
with a programming schedule or other information.  
To set closed captioning:  
To download an additional V-chip rating system (when available):  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
Main Menu  
Main Menu  
Picture  
Audio  
Picture  
Audio  
Channel  
Lock  
Channel  
>>  
Lock  
Setup  
>>  
Setup  
ENTER :Set  
: Select  
ENTER :Set  
: Select  
2
3
4
Press or to select Setup, then press or ENTER. The Setup  
menu opens.  
Press or to select Closed Caption, then press or ENTER.  
The Closed Caption menu opens.  
Press or to select CC Setting.  
On—Captions are displayed on the screen.  
Off—Captions are not be displayed on the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
17  
Changing the TV settings  
5
Press or to select Analog Caption or Digital Caption.  
5 Press or to select CC Advanced, then press or ENTER.  
The CC Advanced menu opens.  
• Analog Caption options include C1, C2, C3, C4, T1, T2, T3,  
and T4.  
CC Advanced  
• Digital Caption options include CS1, CS2, CS3, CS4, CS5, and  
CS6.  
Text Size  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
6
7
Press or to select the closed caption mode you want for  
both analog and digital captions.  
Text Type  
Text Edge  
Press or to select CC Priority, then press or to select  
Digital CC or Analog CC.  
Note: Depending on the broadcast signal, some analog captions can  
function with a digital broadcast signal. This step prevents the two  
types of captions from overlapping.  
Text Color  
Text Opacity  
Background Color  
Background Opacity  
8
Press EXIT to return to normal viewing.  
Notes:  
: Adjust  
: Select  
If the program or video you selected is not closed captioned, no captions  
6
Press or to select the item you want to change, then press  
or to change the setting. You can choose from the following  
options:  
are display on-screen.  
If text is not available in your viewing area, a black rectangle may appear  
on-screen. If this happens, set the CC Setting to Off.  
When selecting closed captions, the captioning will be delayed about 10  
seconds.  
Text Size—Auto, Small, Standard, Large  
Text Type—Auto, Style1, Style2, Style3, Style4, Style5,  
Style6, Style7  
If no closed caption signal is received, no captions appear, but the  
Text Edge—Auto, None, Raised, Depressed, Uniform, Left  
Shadow, Right Shadow  
television remains in the Caption mode.  
Misspellings or unusual characters may occasionally appear during closed  
captioning. This is normal with closed captioning, especially with live  
programs. This is because during live programs, captions are entered  
live. These transmissions do not allow time for editing.  
When captions are being shown, on-screen displays such as volume and  
mute may be seen but may interfere with closed captions.  
Some cable systems and copy protection systems may interfere with the  
closed captioned signal.  
If you use an indoor antenna, or if TV reception is very poor, the closed  
caption decoder may not appear or may appear with strange  
characters or misspelled words. In this case, adjust the antenna for  
better reception or use an outdoor antenna.  
Text Color—Auto, Black, White, Red, Green, Blue, Yellow,  
Magenta, Cyan  
Text Opacity—Auto, Solid, Transparent, Translucent,  
Flashing  
Background Color—Auto, Black, White, Red, Green, Blue,  
Yellow, Magenta, Cyan  
Background Opacity—Auto, Solid, Transparent,  
Translucent, Flashing  
Press EXIT to return to normal viewing.  
7
Notes:  
You cannot set both the Tex t Color and Background Color the same  
color.  
Changing advanced closed caption options  
To change advanced closed caption options:  
You cannot set both Text Opacity and Background Opacity to  
Transparent.  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
Changing picture settings  
Main Menu  
To set the picture mode:  
Picture  
Audio  
Channel  
Lock  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
Main Menu  
>>  
Picture  
>>  
Setup  
Audio  
Channel  
Lock  
ENTER :Set  
: Select  
Setup  
2
3
4
Press or to select Setup, then press or ENTER. The Setup  
menu opens.  
Press or to select Closed Caption, then press or ENTER.  
The Closed Caption menu opens.  
Press or to select Digital CC Preset, then press or to  
select Custom.  
ENTER :Set  
: Select  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
18  
Changing the TV settings  
2
Press or to select Picture, then press or ENTER. The  
Picture menu opens.  
3
Press or to select Picture Setting, then press or ENTER.  
The Picture Setting menu opens.  
Picture  
Picture Setting  
Picture Setting  
Picture Preference  
Picture Size  
Film Mode  
PC Setting  
>>  
Dynamic  
>>  
25  
50  
25  
25  
0
Brightness  
Contrast  
Sharpness  
Color  
On  
Tint  
>>  
Color Temperature  
Cool  
DNR  
On  
: Select  
: Adjust ENTER:Set  
: Adjust  
: Select  
4
Press or to select the option you want to adjust, then press  
or to make the adjustment. Available options include:  
Brightness—Lets you adjust the overall picture brightness  
Contrast—Lets you adjust the overall picture contrast (the  
default setting is maximum)  
Sharpness—Lets you adjust the picture focus  
Color—Lets you adjust the color intensity of the picture  
Tint—Lets you adjust the overall tint (red-green) of the  
picture  
Press ENTER to return to the Picture Setting menu. Repeat Step 4  
to adjust additional settings.  
3
Press or to select Picture Preference, then press or  
to select the preset picture mode you want. Options include:  
Dynamic—A bright and dynamic picture  
Standard—Standard picture quality  
Movie—A movie-like picture setting  
Memory—Sets your personal preferences (see “To set  
After you have set the picture mode, press EXIT to return to  
normal viewing.  
5
6
To set custom picture settings:  
1 Press SETUP/TV MENU. The initial on-screen menu opens.  
After making the adjustments you want, press EXIT to return to  
normal viewing.  
Main Menu  
To set the color temperature:  
1 Press SETUP/TV MENU. The initial on-screen menu opens.  
>>  
Picture  
Audio  
Channel  
Lock  
Main Menu  
>>  
Picture  
Setup  
Audio  
Channel  
Lock  
ENTER :Set  
: Select  
Setup  
2
Press or to select Picture, then press or ENTER. The  
Picture menu opens.  
ENTER :Set  
: Select  
Picture  
2
Press or to select Picture, then press or ENTER. The  
Picture menu opens.  
Picture Setting  
Picture Preference  
Picture Size  
Film Mode  
PC Setting  
>>  
Dynamic  
>>  
Picture  
On  
Picture Setting  
Picture Preference  
Picture Size  
Film Mode  
PC Setting  
>>  
Dynamic  
>>  
>>  
DNR  
On  
On  
>>  
ENTER :Set  
: Select  
DNR  
On  
ENTER :Set  
: Select  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
19  
Changing the TV settings  
3
Press or to select Picture Setting, then press or ENTER.  
The Picture Setting menu opens.  
3
Press or to select Picture Size, then press or ENTER. The  
Picture Size menu opens.  
Picture Setting  
Picture Size  
25  
50  
25  
25  
0
Brightness  
Contrast  
Sharpness  
Color  
0.Natural  
1.Cinema Wide1  
2.Cinema Wide2  
3.Cinema Wide3  
Tint  
Color Temperature  
Cool  
4.Full  
: Select  
: Adjust  
4
5
Press or to select Color Temperature, then press or  
to select the color temperature preset you want. Available  
options include:  
Cool—Gives the picture a bluish tint  
Normal—Gives the picture a neutral tint  
Warm—Gives the picture a redish tint  
After choosing the preset you want, press EXIT to return to  
normal viewing.  
[0-4]:Select  
4
Press or , or the corresponding number buttons, to select  
the picture size you want. Options include:  
Natural—In some cases, this image displays the size of  
standard 4:3 with a black side bar.  
To set the picture size:  
1 Press SETUP/TV MENU. The initial on-screen menu opens.  
Main Menu  
>>  
Picture  
Audio  
Channel  
Lock  
Cinema Wide1 (for 4:3 format programs)—To fill the  
screen, the right and left edges are extended. However the  
center of the picture remains near its former ratio. The top  
and bottom edges of the picture may be hidden.  
Setup  
ENTER :Set  
: Select  
2
Press or to select Picture, then press or ENTER. The  
Picture menu opens.  
Cinema Wide2 (for 4:3 format programs) The top and  
bottom edges of the picture may be hidden.  
Picture  
Picture Setting  
Picture Preference  
Picture Size  
Film Mode  
PC Setting  
>>  
Dynamic  
>>  
On  
>>  
DNR  
On  
Cinema Wide3 picture size (for letterbox programs with  
subtitles)—To fill the width of the screen, it is extended  
horizontally. However it is only slightly extended at the top  
and the bottom. The top and bottom edges of the picture  
may be hidden.  
ENTER :Set  
: Select  
A B C D E FG- - - - - - - - - - - - - - - -  
A B C D E FG- - - - - - - - - - - - - - - - - - - - - - - - - -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Changing the TV settings  
To set the picture in PC mode:  
Full picture size (for 16:9 source programs)—Displays the  
picture at the maximum size.  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
Main Menu  
>>  
Picture  
Audio  
Channel  
Lock  
Setup  
5
After choosing the picture size you want, press EXIT to return to  
normal viewing.  
Notes:  
ENTER :Set  
: Select  
Selectable picture sizes may vary, depending on the input source or  
broadcast signal.  
2
Press or to select Picture, then press or ENTER. The  
Picture menu opens.  
The Picture Size menu can also be opened by pressing ZOOM on the  
remote control.  
Some high definition and/or digital broadcasts may not let you change  
Picture  
the picture size.  
In HDMI or COMPONENT mode, with a scanning rate of 720p or 1080i, only  
the Cinema Wide2 and Full sizes are available.  
In PC Mode, only the Natural and Full picture sizes are available.  
Additionally, this feature does not work when display mode is WXGA.  
Picture Setting  
Picture Preference  
Picture Size  
Film Mode  
PC Setting  
>>  
Memory  
>>  
O  
>>  
To set the film mode:  
1 Press SETUP/TV MENU. The initial on-screen menu opens.  
DNR  
Off  
Main Menu  
ENTER : Set  
: Select  
>>  
Picture  
3
Press or to select PC Setting, then press or ENTER. The  
PC Setting menu opens.  
Audio  
Channel  
Lock  
PC Setting  
Setup  
25  
25  
0
Hor Position  
Ver Position  
Clock  
ENTER :Set  
: Select  
25  
Phase  
2
Press or to select Picture, then press or ENTER. The  
Picture menu opens.  
Picture  
: Select  
ENTER:Set  
: Adjust  
Picture Setting  
Picture Preference  
Picture Size  
Film Mode  
PC Setting  
>>  
Dynamic  
>>  
4
Press or to select the setting you want to adjust. Available  
options include:  
Hor Position—Lets you adjust the horizontal position of  
the image.  
On  
>>  
Ver Position—Lets you adjust the vertical position of the  
image.  
DNR  
On  
Clock—Lets you adjust the clock, to eliminate vertical bars  
or stripes on the picture background.  
: Adjust  
: Select  
Phase—Lets you adjust the phase, after the frequency has  
been set, to optimize the picture.  
3
4
Press or to select Film Mode, then press or to select  
On or Off.  
5
6
After you adjust one setting, press ENTER to return to the PC  
Setting menu to adjust the other settings.  
Note: For smoother motion, set the Film Mode to On when you view a  
DVD.  
After you have set the PC settings, press EXIT to return to normal  
viewing.  
Notes:  
After choosing the setting you want, press EXIT to return to  
normal viewing.  
If no buttons are pressed for more than about 40 seconds, the menu screen  
returns to normal automatically.  
The computer settings do not affect other input modes.  
Setting the DNR  
DNR (Digital Noise Reduction) can reduce the roughness of the picture  
(only for analog broadcasts).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Changing the TV settings  
To set the DNR:  
3
4
Press or to select the item you want to adjust, then press  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
or to make the adjustment. Available options include:  
Bass—Lets you adjust the bass sounds.  
Treble—Lets you adjust the treble sounds.  
Balance—Lets you adjust the sound balance (left to right).  
After you have adjusted the sound settings, press EXIT to return  
to normal viewing.  
Main Menu  
>>  
Picture  
Audio  
Channel  
Lock  
To select the stereo and SAP settings:  
1 Press SETUP/TV MENU. The initial on-screen menu opens.  
Setup  
Main Menu  
Picture  
ENTER :Set  
: Select  
>>  
Audio  
Channel  
Lock  
2
Press or to select Picture, then press or ENTER. The  
Picture menu opens.  
Setup  
Picture  
Picture Setting  
Picture Preference  
Picture Size  
Film Mode  
PC Setting  
>>  
Dynamic  
>>  
ENTER :Set  
: Select  
2
Press or to select Audio, then press or ENTER. The Audio  
On  
menu opens.  
>>  
Audio  
DNR  
On  
15  
15  
0
Bass  
: Adjust  
: Select  
Treble  
Balance  
MTS  
3
4
Press or to select DNR, then press or to select On or  
Off.  
Press EXIT to return to normal viewing.  
Stereo  
No Info.  
HDMI  
Audio Language  
HDMI Audio  
Changing the audio settings  
To adjust the audio settings:  
: Select  
: Adjust  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
3
4
Press or to select MTS, then press or to select the  
audio program type. Available options include:  
Main Menu  
Picture  
Stereo—Lets you listen to stereo audio (this setting  
automatically outputs the type of sound being broadcast,  
either stereo or mono.  
SAP—Lets you listen to a second audio program (SAP)  
instead of normal audio.  
MONO—Lets you listen to monaural sound only.  
Press EXIT to return to normal viewing.  
>>  
Audio  
Channel  
Lock  
Setup  
To select the audio language:  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
ENTER :Set  
: Select  
Main Menu  
2
Press or to select Audio, then press or ENTER. The Audio  
Picture  
menu opens.  
>>  
Audio  
Channel  
Lock  
Audio  
15  
15  
0
Bass  
Setup  
Treble  
Balance  
MTS  
Stereo  
No Info.  
HDMI  
ENTER :Set  
: Select  
Audio Language  
HDMI Audio  
: Select  
: Adjust  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
22  
Changing the TV settings  
2
Press or to select Audio, then press or ENTER. The Audio  
menu opens.  
2
Press or to select Audio, then press or ENTER. The Audio  
menu opens.  
Audio  
Audio  
15  
15  
0
15  
15  
0
Bass  
Bass  
Treble  
Treble  
Balance  
MTS  
Balance  
MTS  
Stereo  
English  
HDMI  
Stereo  
No Info.  
HDMI  
Audio Language  
HDMI Audio  
Audio Language  
HDMI Audio  
: Select  
ENTER:Set  
: Select  
: Adjust  
3
4
Press or to select HDMI Audio, then press or to select  
3
Press or to select Audio Language, then press or  
ENTER. The Audio Language menu opens.  
one of the following options:  
HDMI—When you connect an HDMI device to your TV.  
DVI—When you connect a DVI device to your TV and  
connect the sound with an analog sound cable.  
Press EXIT to return to normal viewing.  
Audio Language  
0. English  
1. French  
2. No Info.  
3. No Info.  
4. No Info.  
5. No Info.  
6. No Info.  
Changing miscellaneous settings  
Adjusting the back lighting  
You can adjust the back lighting of the screen to improve picture clarity.  
To adjust the back lighting:  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
Main Menu  
[0-6]: Select  
Picture  
Audio  
Channel  
Lock  
4
5
Press  
you want.  
Press EXIT to return to normal viewing.  
,
, or the number buttons (0-6) to select the language  
>>  
Setup  
Selecting the HDMI audio input source  
When you have an HDMI or DVI device connected to the PC/DVI AUDIO  
IN jack, with an HDMI or DVI device, you must select either an HDMI or  
DVI audio input source.  
ENTER :Set  
: Select  
To select the HDMI audio input source:  
2
Press or to select Setup, then press or ENTER. The Setup  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
menu opens.  
Main Menu  
Picture  
Setup  
Closed Caption  
Language  
Video Label  
Backlight  
>>  
>>  
Audio  
Channel  
Lock  
English  
>>  
16  
Setup  
Auto Shut Off  
Reset  
Off  
>>  
ENTER :Set  
: Select  
: Adjust  
: Select  
3
4
Press or to select Backlight, then press or to adjust  
the setting.  
Press EXIT to return to normal viewing.  
Setting the automatic shut off  
The Auto Shut Off feature automatically turns the TV off after 15  
minutes if the station being viewed stops broadcasting or the TV is not  
operated in that time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
23  
Using the DVD player  
To set the auto shut off:  
Using the DVD player  
Disc organization  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
Main Menu  
Title  
Picture  
When two or more movies are recorded on a disc, the disc is divided into  
two or more sections. Each section is called a “Title.”  
Audio  
Channel  
Lock  
Chapter  
The titles can be subdivided into many sections. Each section is called a  
“Chapter.”  
>>  
Setup  
Track  
An audio CD can contain several items. These are assigned to the tracks.  
ENTER :Set  
: Select  
Regional code  
2
Press or to select Setup, then press or ENTER. The Setup  
menu opens.  
Your player has a regional code 1 printed on the back of the case. Your  
player can play only DVDs labeled with the same regional code 1 or ALL.  
Notes:  
Setup  
Most DVDs have a globe with one or more numbers in it clearly visible on  
the cover. This number must match your player’s regional code or the  
DVD cannot play.  
Closed Caption  
Language  
Video Label  
Backlight  
>>  
English  
>>  
If you try to play a DVD with a different regional code from your player, the  
message “Check Regional Code” appears on the TV screen.  
16  
Auto Shut Off  
Reset  
Off  
>>  
Understanding the disc status screen  
To view the disc status screen:  
1
Press DISPLAY. The disc status screen opens.  
: Adjust  
: Select  
1
3
4
Press or to select Auto Shut Off, then press or to  
select On (or Off if you want to turn it off).  
Press EXIT to return to normal viewing.  
2
3
DVD  
00:15:25 01:41:39  
Chapter 2/24  
Title 1/3  
9
4
Resetting your TV to factory default settings  
To reset your TV to factory default settings:  
1/1 Eng Dolby Digital  
1/2 Eng  
1/1  
1
Press SETUP/TV MENU. The initial on-screen menu opens.  
7
6
5
8
Main Menu  
#
Information  
Picture  
Audio  
Channel  
Lock  
1
2
3
4
5
6
7
8
9
Current disc operation  
Elapsed time  
Total time  
>>  
Setup  
Chapter number playing  
Subtitle language selected  
Audio type selected  
Audio language selected  
Angle selected  
ENTER :Set  
: Select  
2
Press or to select Setup, then press or ENTER. The Setup  
menu opens.  
DVD title number  
Setup  
2
When you are finished viewing the disc status screen, press  
DISPLAY again to return to normal viewing.  
Closed Caption  
Language  
Video Label  
Backlight  
>>  
English  
>>  
16  
Auto Shut Off  
Reset  
Off  
>>  
: Select  
ENTER:Set  
3
Press or to select Reset, then press or ENTER. “Reset”  
appears on the screen for about three seconds, then the TV  
returns to normal viewing.  
Note: MTS and HDMI Audio are not reset by this procedure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
24  
Using the DVD player  
Frame Advance—Press PAUSE/STILL during normal  
playback to pause the program. Each time you press  
PAUSE/STILL the program is advanced one frame. Press  
PLAY to resume normal playback.  
Playing DVDs  
To play a DVD:  
1
Press TV/DVD to change to DVD mode (each time you turn the TV  
on, it starts in the TV mode). The DVD startup screen appears.  
If you are using an amplifier, turn it on.  
Slow-motion Playback—Press SLOW reverse or  
SLOW forward during normal playback or still playback. Each  
press of either button decreases the speed of the program (×1/2,  
×1/4, ×1/6, ×1/7). Press PLAY to resume normal playback.  
2
3
Place the disc in the disc slot with the label side facing forward.  
Hold the disc by the edges, without touching either of its  
surfaces.  
Locating a chapter or track—Press SKIP  
forward or  
reverse during playback to locate a chapter that you  
SKIP  
want to watch. Each time you press the button, a chapter or track  
is skipped.  
Notes:  
The unit is capable of holding a still video image or on-screen display  
image on your television screen indefinitely. If you leave the still video  
image or on-screen display image displayed on your TV for an  
extended period of time, you risk permanent damage to your  
television screen.  
There may be a slight delay between when you press the button and the  
feature activating.  
Locating a specific scene on a DVD  
You can use the title, chapter, and time recorded on the disc to locate a  
specific point to play back.  
On the screen, changes to “Reading” and playback begins.  
If the disc has a menu feature, the menu screen may appear. In  
this case, press  
,
,
, or and ENTER to navigate the menu.  
To locate a specific scene on a DVD:  
4
Press STOP to end playback. The unit memorizes the stopped  
1
Press T.SEARCH during playback or in stop mode. The T. Search  
menu opens.  
point and  
appears on the screen. Press PLAY to resume  
playback (from the memorized point).  
T.Search  
5
6
If you press STOP again, or unload the disc, the unit clears the  
memorized stop point.  
Press (eject). Remove the disc and then press POWER. The  
unit turns off.  
Title  
Chapter  
Time  
Notes:  
If your unit does not operate properly, it may be affected by static  
electricity. Disconnect the AC power cord, then connect it again.  
If a non-compatible disc is loaded, “Incorrect Disc, Region Code Error,” or  
“Parental Error” appears on the TV screen, depending on the type of  
disc loaded. See “Playable discs” on page 31.  
Some discs may take about a minute to start playback.  
If an 8 cm disc is loaded and picture playback or menu display does not  
begin automatically, press PLAY to begin playback.  
2
3
Press or to select the Title, Chapter, or Time.  
Press the number buttons (0–9) to enter the number. Refer to  
the package supplied with the disc to check the numbers. If you  
enter a wrong number, press EXIT.  
Press ENTER. Playback starts.  
When you change the title, playback starts from Chapter 1 of the  
selected title.  
4
A “Prohibition” symbol “X” may appear at the upper right of the screen.  
This symbol means either the feature you tried is not available on the  
disc, or the player cannot access the feature at this time. This does not  
indicate a problem with the player.  
Some discs may not work in the above operation.  
Marking your favorite scenes  
The TV stores the points that you want to watch again. You can resume  
playback from that scene.  
If you load a single-faced disc backwards, “Reading” appears on the  
screen, then “Incorrect Disc” is displayed.  
To mark the scenes you want:  
Some DVD playback operations may be intentionally preset by the  
manufacturer. Since this player plays DVDs according to the disc  
content recorded, some playback features may not be available. Refer  
to the instructions supplied with the DVD.  
1
Press MARKER during playback. The Marker menu opens.  
Marker 1  
Marker 2  
Marker 3  
00 27 54  
Controlling playback  
To control playback:  
Fast Forward Playback—Press SEARCH  
during normal  
playback. Each time you press SEARCH  
, the speed increases  
2
3
Press or to select a blank marker, then press ENTER at the  
desired scene. Up to three scenes can be selected. If you want,  
you can repeat this procedure to set the other two scenes.  
(DVD - × 2, × 4, × 8, ×15) (CD - × 2, × 4, × 8, × 20). Press PLAY  
to resume normal playback.  
Fast Reverse Playback—Press SEARCH  
playback. Each time you press SEARCH  
during normal  
, the speed increases  
Press MARKER again to close this dialog box.  
(DVD - × 2, × 4, × 8, ×15) (CD - × 2, × 4, × 8, × 20). Press PLAY  
to resume normal playback.  
Pause—Press PAUSE/STILL during normal playback to  
pause the program. Press PLAY to resume normal playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
25  
Using the DVD player  
To replay marked scenes:  
3
To resume normal playback, press A-B again. Off” appears  
on the screen.  
Notes:  
1
Press MARKER during playback or stop mode. The Marker dialog  
box opens.  
Some discs may not work with the A-B Repeat feature.  
In A-B Repeat mode, subtitles near point A or B may not appear.  
Marker 1  
Marker 2  
Marker 3  
00 27 54  
01 16 25  
02 08 31  
Changing the soundtrack language  
You can select the language when you play a multilingual disc.  
To select a different soundtrack language:  
1
Press AUDIO during playback. The current soundtrack language  
is shown on the screen.  
2
Press or to select Marker 1-3, then press ENTER. Playback  
starts from the marked scene.  
1/2 Eng Dolby Digital  
To cancel the mark:  
1
Press MARKER during playback or stop mode. The Marker menu  
opens.  
2
Press AUDIO repeatedly until the desired language is selected.  
Marker 1  
Marker 2  
Marker 3  
00 27 54  
01 16 25  
02 08 31  
The on-screen display disappears after a few seconds.  
Notes:  
If the desired language is not heard after pressing AUDIO several times,  
the language is not recorded on the disc.  
The alternate soundtrack language is cancelled when you eject the disc  
and the initial (default) language will be heard if the disc is played  
back again.  
2
Press or to select Marker 1-3, then press EXIT. The marker  
is removed.  
Notes:  
Displaying subtitles  
Marking is canceled when you eject the disc or turn the power off.  
Some subtitles recorded around the marker may fail to appear.  
While playing a DVD, you can turn on subtitles and select the subtitle  
language.  
Repeating DVD playback  
To repeat a Title or Chapter:  
To turn subtitles on, select the subtitle language, or turn subtitles off:  
1
Press SUBTITLE repeatedly during playback to cycle through the  
available subtitle languages.  
1
Press REPEAT during playback or stop mode. The Play Mode  
menu opens.  
1/5 Eng  
Play Mode  
Repeat  
: Off  
Stop when you reach the language you want. The on-screen  
display disappears after a few seconds.  
To turn subtitles off, press SUBTITLE again repeatedly until Off is  
selected.  
2
3
Press ENTER repeatedly to select Chapter or Title.  
Press REPEAT again to make the menu disappear.  
The unit automatically starts to repeat playback after finishing  
the current title or chapter. In stop mode, press PLAY to start  
repeat playback.  
2
Notes:  
The selected subtitle language is cancelled when you eject the disc.  
Some features may not work on some DVDs. You may not be able to turn  
subtitles on or off or change subtitles. While playing a DVD, the  
subtitle may change when you eject the disc or change the title.  
In some cases, the subtitle language is not changed to the selected one  
immediately.  
4
To resume normal playback, open the Play Mode menu again,  
then select Off.  
Using A-B Repeat  
A-B Repeat lets you repeat a specific segment of a DVD between two  
selected points.  
Changing the viewing angle  
When playing back a disc recorded with multiple angles, you can  
change the viewing angle.  
To repeat a specific segment of a DVD:  
1
Press A-B during playback. The start point is selected.  
To change the viewing angle:  
A
1
Press ANGLE during playback. The current angle is shown on the  
screen.  
1/2  
2
Press A-B again. The end point is selected.  
A
B
Playback starts at the point (A) that you selected. Playback stops  
at the end point (B), then returns to point A automatically and  
starts again.  
2
Press ANGLE repeatedly until the desired angle is selected.  
Note: Depending on the DVD, you may not be able to change the angles,  
even if multiple angles are recorded on it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
Using the DVD player  
Selecting the title  
3
4
Press or to select the desired option, then press or  
ENTER.  
Some DVDs are recorded with two or more titles. If a title menu is  
recorded on the disc, you can select the title you want.  
Press or to select the language you want, then press  
ENTER. Available options include:  
To select a title:  
1
2
Press DVD TITLE during playback. The Title menu opens.  
Press , or to select the title you want, then press  
ENTER or PLAY. The selected title starts playing.  
Note: Depending on the DVD, you may not be able to select a title.  
Depending on the DVD, a “title menu” may be called a “menu” or “title”  
in the instructions supplied with the disc.  
• English  
,
,
French (Français).  
Spanish (Español)  
Other—Additional languages can be selected using the  
Off (Subtitle)—Turns subtitles off.  
Original (Audio)—Subtitle will appear in the original  
language of the disc.  
Using the DVD menu  
Some DVDs let you select the disc contents using the menu. When you  
play these DVDs, you can select the subtitle language, soundtrack  
language, and so on, using the DVD menu.  
To use the DVD menu:  
5
Press SETUP/TV MENU to close the menu screen.  
Note: If the selected language is not recorded on the disc, the first priority  
language is selected.  
1
2
Press DVD MENU during playback. The DVD menu opens.  
Press DVD MENU again to resume playback at the scene when  
you pressed DVD MENU.  
Setting the aspect ratio  
To set the aspect ratio:  
1
Press SETUP/TV MENU in stop mode or with no disc inserted.  
The DVD menu opens.  
3
Press  
,
,
, or to select the title you want, then press  
ENTER. The menu continues to another screen. Repeat Steps 2  
and 3 to set additional items.  
TV Screen  
: 16:9  
: On  
Display  
Using the Zoom feature  
Your player lets you zoom in on the frame image. You can then make  
selections by switching the position of the frame.  
To use the Zoom feature:  
Picture Mode  
JPEG Interval  
: Auto  
: O  
1
Press ZOOM during playback. The center part of the image is  
magnified. Each time you press ZOOM, the magnification  
changes 1 = ×1.3, 2 = × 1.5) and 3 = × 2.0.  
2
3
Press  
,
,
, or to view a different part of the picture.  
2
Press or to select the Display icon , then press or  
or ENTER. The Screen menu opens.  
Press ZOOM repeatedly to return to a 1:1 view ( Off).  
Notes:  
While in zoom mode, you can use Pause, Slow, or Search.  
Zoom may not work with some discs.  
TV Screen  
4:3  
4:3  
Display  
Setting the language  
You can select the language of the menu, subtitle, and soundtrack if  
more than one language is recorded onto the disc.  
To set the language:  
16:9  
Picture Mode  
JPEG Interval  
: O  
1
Press SETUP/TV MENU while in stop mode. The DVD menu  
opens.  
Menu  
: English  
: English  
: English  
3
4
Press or to highlight TV Screen, then press or ENTER.  
Press or to select the screen type you want, then press  
ENTER. Available options include:  
Subtitle  
Audio  
4:3 Letterbox—When playing a wide-screen DVD, this  
option displays the wide picture with black bands at the top  
and bottom.  
4:3 Panscan—Displays a wide picture on the whole screen,  
with left and right edges automatically cut off.  
16:9 Wide—Displays wide-screen pictures full size.  
Press SETUP/TV MENU to close the menu screen.  
Note: It is not always possible for the DVD to display the picture in your  
preferred picture setting. For example, the disc may not offer “4:3  
Panscan.” In this case the picture would display in the format available  
on the disc.  
2
Press or to select the Language icon , then press or  
or ENTER. The Language menu opens.  
5
Menu  
English  
Francais  
Espanol  
Other  
Subtitle  
Audio  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Using the DVD player  
Setting the on-screen display  
The on-screen display can be turned on or off when you press any  
buttons.  
2
Press or to select the Display icon then press or  
or ENTER. The Screen menu opens.  
To set the on-screen display:  
TV Screen  
:16:9  
: On  
1
Press SETUP/TV MENU in stop mode or with no disc inserted.  
The DVD menu opens.  
Display  
Auto  
Picture Mode  
JPEG Interval  
Film  
TV Screen  
: 16:9  
: On  
Video  
Display  
Picture Mode  
JPEG Interval  
: Auto  
: Off  
3
4
Press or to highlight Picture Mode, then press or  
ENTER.  
Press or to select the setting you want, then press ENTER.  
Available options include:  
2
Press or to select the Display icon , then press or  
or ENTER. The Screen menu opens.  
Auto—Select this option for normal viewing. The unit  
automatically detects the source content.  
Film—Suitable for film content.  
TV Screen  
:16:9  
Video—Suitable for video content.  
O  
Display  
5
Press SETUP/TV MENU to close the menu screen.  
On  
Picture Mode  
JPEG Interval  
Setting the night mode  
Night mode lets you control the dynamic range of your equipment.  
To set the night mode:  
: Off  
1
Press SETUP/TV MENU in stop mode or with no disc inserted.  
The DVD menu opens.  
Night Mode  
Digital Out  
: Off  
3
4
Press or to highlight Display, then press or ENTER.  
Press or to select the setting you want, then press or  
ENTER. Available options include:  
: PCM  
Off—On-screen displays are not shown, except when you  
press SUBTITLE, REPEAT, MUTE, VOLUME, MARKER,  
DISPLAY, AUDIO, and T.SEARCH.  
On—On-screen displays are shown when you press the  
buttons (default).  
Press SETUP/TV MENU to close the menu screen.  
5
2
Press or to select the Audio icon , then press or or  
ENTER. The Audio menu opens.  
Setting the picture mode  
There are two types of source content in pictures recorded on DVDs.  
These include film content (pictures recorded from films at 24 frames  
per second) and video content (video signals recorded at 30 frames per  
second). Make this selection according to the type of content being  
viewed.  
Night Mode  
Digital Out  
O  
On  
To set the picture mode:  
1
Press SETUP/TV MENU in stop mode or with no disc inserted.  
The DVD menu opens.  
TV Screen  
: 16:9  
: On  
Display  
3
4
Press or to highlight Night Mode, then press or ENTER.  
Press or to select the setting you want, then press ENTER.  
Available options include:  
On—Loud sounds, such as explosions, are toned down  
slightly.  
Off—Audio is played as recorded.  
Press SETUP/TV MENU to close the menu screen.  
Picture Mode  
JPEG Interval  
: Auto  
: Off  
5
Setting the digital sound output  
You can select the digital sound output, based on your system  
connection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Using the DVD player  
To set the digital sound output:  
3
Press or to select the Parental, then press or ENTER.  
The Enter Password screen opens.  
1
Press SETUP/TV MENU in stop mode or with no disc inserted.  
The DVD menu opens.  
Parental  
: Off  
Night Mode  
Digital Out  
: Off  
Enter Password  
Password  
: PCM  
4
5
Enter “0000” using the number buttons (0-9), this is the preset  
password, then press ENTER. The parental level list opens. If you  
enter a wrong number, press EXIT and try again.  
Press or to select the setting you want, then press ENTER.  
Available options include:  
2
Press or to select the Audio icon , then press or or  
ENTER. The Audio menu opens.  
Night Mode  
Digital Out  
: O  
Off  
Level Off—No control.  
PCM  
Level 8—Virtually all DVDs can be played back.  
Level 1—The most restrictive setting.  
Bitstream  
The limitation is more restrictive as the level number decreases.  
6
Press SETUP/TV MENU to close the menu screen.  
Notes:  
The level of dynamic range reduction may differ, depending on the DVD.  
Depending on the disc, the unit may not be able to limit playback.  
Some discs may not be encoded with specific rating level information,  
even though the disc jacket says “adult.” For those discs, the age  
restriction does not work.  
3
4
Press or to highlight Digital Out, then press or ENTER.  
Press or to select the setting you want, then press ENTER.  
Available options include:  
After the rating is locked, the setting cannot be changed unless you enter  
Off—No sound output from the DIGITAL AUDIO OUT jack.  
PCM—Changes Dolby Digital to PCM output. Choose this  
option when your player is connected to a 2-channel digital  
stereo amplifier.  
Bitstream—Disc audio bitstream data is output.  
Press SETUP/TV MENU to close the menu screen.  
Notes:  
the correct password.  
To set a new password:  
1
Press SETUP/TV MENU in stop mode or with no disc inserted.  
The DVD menu opens.  
5
Parental  
: Off  
This feature works only during playback of Dolby-Digital recorded discs.  
Even if you select “Bitstream,” MPEG audio will be output in PCM format.  
Password  
: Change  
Setting parental controls  
Some discs are specified “not suitable for children.” You can limit  
playback of these discs on your TV/DVD.  
To set the password and parental control level:  
1
Press SETUP/TV MENU in stop mode or with no disc inserted.  
The DVD menu opens.  
2
3
Press or to select the Parental icon , then press or  
or ENTER. The Parental Control menu opens.  
Press or to select the Password, then press or ENTER.  
The Enter Current Password screen opens.  
Parental  
: Off  
Password  
: Change  
Parental  
: Off  
Password  
: Change  
Enter Current Password  
2
Press or to select the Parental icon , then press or  
or ENTER. The Parental Control menu opens.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
Using the DVD player  
4
Enter your password using the number buttons (0-9), then press  
• Music files recorded by the “Hierarchical File System” (HFS)  
cannot be played.  
• This player can play back baseline and progressive JPEG files.  
• MP3 or WMA files on a KODAK Picture CD are not recognized by  
this player.  
ENTER. The Enter New Password screen opens. If you enter a  
wrong number, press EXIT and try again.  
Parental  
: Off  
Limitations on display  
Password  
: Change  
• Only 15 characters of a file name are displayed. Long file names  
are condensed.  
Enter New Password  
• Available letters for display are capital or lowercase letters A  
through Z, numbers 0 through 9, and _ (underscore).  
• Other letters than those above are replaced by a hyphen.  
Notes on MP3/WMA/JPEG files  
• To play back MP3/WMA/JPEG CDs in recorded order:  
• Use MP3/WMA/JPEG software that records data  
alphabetically or numerically.  
• File names should include a two-digit or three-digit number  
(for example, “01” “02” or “001” “002”).  
Notes:  
5
Enter your new password using the number buttons (0-9), then  
press ENTER. Your new password has been set.  
Note: Do not forget your new password. Write it down in a convenient  
place. If you forget the password, contact Customer Service. The  
original remote control will be required.  
Some MP3/WMA/JPEG CDs cannot be played back, depending on the  
recording conditions.  
Temporarily disabling the rating level  
Some pre-recorded DVDs may attempt to temporarily cancel the rating  
level that you have set. You are given the option to allow or not allow  
the override.  
The CD-R/RW that has no music data or non-MP3/ WMA/JPEG files can  
not be played.  
MP3/WMA CD and audio CD playback  
To play back MP3/WMA and audio CDs:  
To temporarily disable the rating level:  
1
Load a DVD. If the DVD has been designed to temporarily cancel  
the rating level, an option screen opens. Press ENTER to select  
YES to override the rating, or NO to accept the rating.  
1
Load an MP3/WMA/JPEG CD or an audio CD into the disc slot.  
“Reading” appears on the TV (reading time depends on the  
number of files on the disc), then a file browser appears on the  
screen.  
2
If you select YES, an Enter Password screen opens.  
2
3
1
4
Enter Password  
1/15 00:00:00  
/MP3-5.MP3  
Select Files  
MP3-5  
Repeat :O  
MP3-6  
5
:Off  
Mod  
WMA-11  
WMA-12  
Picture-1  
Picture-2  
Picture-3  
Picture-4  
3
Enter your password using the number buttons (0-9), then press  
ENTER. Playback begins if you enter the correct password.  
8
Note: This temporary cancellation of the rating level is retained until the  
disc is ejected, at which time the original rating level will be set again  
automatically.  
Music Playing  
Playing MP3, WMA, JPEG and audio CD  
discs  
7
6
This player can play back MP3, WMA, and JPEG data which has been  
recorded on CD-R or CD-RW discs. To produce MP3, WMA, and JPEG  
discs, you need a Windows computer with CD burner and MP3/WMA/  
JPEG encoding software (not supplied). The Apple-HFS-System discs  
cannot be played.  
#
Information  
1
2
3
4
5
6
7
8
Disc operation status  
File number  
Elapsed time  
MP3/WMA/JPEG CD disc information  
Limitations on MP3/WMA/JPEG CD playback  
• MP3/WMA/JPEG CDs are standardized by ISO9660. File names  
must include the three-digit extension letters “MP3, WMA, or  
“JPEG.  
Selected file name  
Tool kit window  
Preview window  
Cursor  
• The directory and file names of MP3/WMA/JPEG CDs must  
correspond to ISO standardized files.  
• This player can read 2000 files per disc. If one folder has more  
than 2000 files, it reads up to 2000 files. The remaining files are  
omitted.  
• If a CD has both audio tracks and MP3/WMA/JPEG files, only  
audio tracks are played.  
• It may take more than one minute for this player to read  
MP3/WMA/JPEG files, depending on the disc structure.  
• Music recorded by “Joliet Recording Specification” can be played  
back.  
File list ( =music, =picture)  
• If the current directory includes nine files or more, press or  
to scroll through the file list.  
• To see the contents of a folder, select the folder, then press  
ENTER. To return to the parent directory, select  
Go Up ...” then press ENTER.  
• If a CD contains a mixture of MP3, WMA, and JPEG files, the  
files are played back by selecting them from the file browser.  
Press or to select the file you want to play.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
30  
Using the DVD player  
When you press PLAY after displaying the file browser, playback  
begins automatically starting from the first file. If there is no file  
in the root directory, playback does not begin automatically.  
Repeating CD playback  
To repeat CD playback:  
1
In the file browser, press  
,
,
, or to select Repeat.  
3
4
Press ENTER. The selected file starts playing.  
Press STOP to end playback. The unit memorizes the stopped  
point and appears on the screen. Press PLAY to resume  
playback. If you press STOP again or unload the disc, the unit  
clears the stopped point.  
Folder-1  
Folder-2  
MP3-1  
Select Files  
Repeat :Track  
:O  
Mode  
MP3-2  
Notes:  
MP3-3  
During MP3/WMA/JPEG playback, you cannot use T.SEARCH and A-B.  
You can use Program playback, Repeat (Track or All), and Random  
features for MP3/WMA/ JPEG and audio CD Playback.  
WMA-1  
WMA-2  
WMA-3  
JPEG Preview  
Programming CD playback  
To program CD playback:  
2
3
Press ENTER repeatedly to select Track and All.  
1
In the file browser, press  
then press ENTER.  
,
,
, or to select Edit Mode,  
Press PLAY. The unit starts to repeat playback after the current  
track is finished. To resume normal playback, set Repeat to Off in  
Step 2.  
Notes:  
Folder-1  
Folder-2  
MP3-1  
The repeat or random functions are cancelled when you eject the disc or  
Repeat :Off  
Mode  
:Off  
turn the power off.  
Edit Mode  
The track repeat function is cancelled when SKIP  
back is pressed.  
You can also use the A-B Repeat feature with audio CDs.  
forward or SKIP  
MP3-2  
MP3-3  
WMA-1  
WMA-2  
WMA-3  
JPEG Preview  
Random CD playback  
To randomly play the tracks on a CD:  
1
In the file browser, press  
,
,
, or to select Mode.  
When Edit Mode is highlighted black, you can mark the files  
which you want to add to the program list.  
2
Press  
,
,
, or to select the file you want to add to the  
Folder-1  
Folder-2  
MP3-1  
Select Files  
Repeat :O  
Mode :Random  
program list, then press ENTER. The selected file is marked.  
MP3-2  
MP3-3  
Folder-1  
Repeat :Off  
WMA-1  
WMA-2  
WMA-3  
Folder-2  
MP3-1  
Mode  
:Off  
JPEG Preview  
Edit Mode  
MP3-2  
MP3-3  
WMA-1  
WMA-2  
WMA-3  
2
3
Press ENTER to select Random.  
JPEG Preview  
Press PLAY. The unit starts random playback after the current  
track is finished. To resume normal playback, set the mode to Off  
in Step 2.  
3
4
Repeat this procedure to select the other files.  
JPEG playback  
Press  
,
,
, or to select Add To Program, then press  
To play back JPEG files:  
ENTER. All marked files are added to the program list.  
1
Load a JPEG CD into the disc slot. The JPEG browser opens.  
When you finish adding the files you want to the program list,  
select Edit Mode again, then press ENTER to exit edit mode.  
Press or to highlight Program View, then press ENTER.  
Program View shows only the files you have added to the  
program list.  
/Picture-01.JPG  
5
Select Files  
Picture-01  
Picture-02  
Picture-03  
Picture-04  
Picture-05  
Picture-06  
Picture-07  
Picture-08  
Repeat :Off  
Mode  
:Off  
Folder-1  
Folder-2  
MP3-1  
MP3-1  
MP3-2  
MP3-3  
WMA-3  
Edit Mode  
Program View  
Add To Program  
Edit Mode  
Browser View  
Clear Program  
MP3-2  
MP3-3  
WMA-1  
WMA-2  
WMA-3  
JPEG Preview  
JPEG Preview  
W: 2048 H: 1536  
6
7
In the Program View, press PLAY. The files start to playback in  
programmed order.  
To remove a file from the program list in stop mode, select Edit  
Mode, then switch to Program View. Select the files you want  
to remove, then press ENTER. Select Clear Program and press  
ENTER. Marked files are removed from the program list.  
2
Press DVD MENU to display a thumbnail list of pictures on the  
disc, then press , or to select the file you want to see  
,
,
(or press DVD TITLE to return to the file browser).  
Press ENTER or PLAY. The selected picture is displayed.  
To rotate the image, press ANGLE. Each time you press ANGLE,  
the image rotates by 90°.  
3
4
Note: The program is cancelled when you eject the disc or turn the power  
off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Appendix  
5
6
To zoom in on an image, press ZOOM.  
Press STOP to end playback. If you want to view another picture,  
repeat Steps 2 and 3.  
Appendix  
Language code list  
To display selected file types:  
1
2
3
4
With the JPEG browser open, press or to highlight Select  
Files in the right column, then press ENTER.  
Press or to select the file type from the list (Music or  
Picture).  
Press ENTER to add or remove the check mark. The checked file  
type is displayed in the file browser.  
Press RETURN to save the setting.  
Setting the JPEG interval  
You can automatically play back all JPEG files continually.  
To set the JPEG interval:  
1
Press SETUP/TV MENU in the stop mode. The DVD menu opens.  
TV Screen  
: 16:9  
: On  
Display  
Picture Mode  
JPEG Interval  
: Auto  
: Off  
2
Press or to select the Display icon , then press or  
or ENTER. The Picture menu opens.  
TV Screen  
Display  
: 16:9  
: On  
Playable discs  
Picture Mode : Auto  
Off  
JPEG Interval  
Disc  
Characteristics  
DVD (12 cm disc)  
5 Seconds  
10 Seconds  
15 Seconds  
DVDs such as movies that can be purchased  
or rented. Your player can play one-layer or  
two-layer discs.  
DVD-R/RW discs with DVD video format are  
also available.  
3
4
Press or to select JPEG Interval, then press or ENTER.  
Press or to select the time interval you want, then press  
ENTER. Available options are Off (plays one file at a time),  
5 Seconds, 10 Seconds, and 15 Seconds.  
Audio CD (8 cm/12 cm disc)  
Music CDs or CD-Rs/CD-RWs in music CD  
format that can be played.  
5
Press SETUP/TV MENU to close the menu screen.  
CD-R/CD-RW (12 cm disc)  
CD-R/CD-RWs that contain audio titles, MP3,  
WMA, or JPEG files.  
Notes:  
Do not use irregularly shaped CDs (for example, heart-shaped or  
octagonal). Doing so may result in malfunctions.  
Depending on the recording software and the finalization, some recorded  
discs (CD-R/RW or DVD R/RW) may not be playable.  
DVD-R/RW, DVD+R/RW, and CD-R/RW discs recorded using a personal  
computer or a DVD or CD recorder may not play if the disc is damaged  
or dirty or if there is dirt or condensation on your player’s lens.  
If you record a disc using a personal computer, even if it is recorded in a  
compatible format, there are cases in which it may not play because of  
the settings of the software used to create the disc. (Check with the  
software publisher for more detailed information.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
32  
Maintaining  
Your player requires discs and recordings to meet certain technical  
standards in order to achieve optimal playback quality. Pre-recorded  
DVDs are automatically set to these standards. There are many  
different types of recordable disc formats (including CD-R containing  
MP3 or WMA files), and these require certain pre-existing conditions  
(see above) to ensure compatible playback.  
You should note that permission is required in order to download MP3 or  
WMA files and music from the Internet. Our company has no right to  
grant such permission. Permission should always be sought from the  
copyright owner.  
Troubleshooting  
Using progressive scan  
Not all high-definition televisions are fully compatible with your player  
and may cause artifacts to be displayed in the picture.  
In case of progressive scan picture problems, we recommend that you  
switch the connection to the standard definition output. If there are  
questions regarding your television’s compatibility with your player,  
contact our customer service center.  
Use the following check list for troubleshooting when you have  
problems with your TV. Consult your local dealer or service outlet if  
problems persist.  
Maintaining  
Cleaning  
Make sure that all connections are correctly made.  
• Before cleaning the screen, unplug your TV from the power  
outlet.  
• Wipe the front panel and other exterior surfaces of your TV with a  
soft cloth immersed in lukewarm water, then wrung dry.  
• Never use a solvent or alcohol. Do not spray insecticide liquid  
near your TV. Such chemicals may cause damage and  
discoloration to the exposed surfaces.  
Problem  
Solution  
General problems  
No power  
• Make sure the power cord is plugged in.  
• Power is off, check fuse or circuit breaker.  
• Unplug the TV, then plug it back in.  
TV reception problems  
Care and handling of discs  
Ghosts in the picture Ghosts are caused by the television signal  
following two paths. One is the direct path  
and the other is reflected by tall buildings,  
hills or other large objects. Changing the  
direction or position of the antenna may  
improve the reception.  
Handling discs  
Do not touch the playback side of the disc. Hold the disc by the edges so  
that fingerprints do not get on the surface. Never stick paper or tape on  
the disc.  
Ignition noise  
Black spots or horizontal streaks may appear,  
or the picture may flutter or drift. Usually  
caused by interference from automobile  
ignition systems, neon lamps, or AC-powered  
tools and appliances, such as drills or hair  
dryers.  
Storing discs  
Snow in the picture  
If the TV is located far from the TV station,  
such as in a fringe reception area where the  
signal is weak, small dots may appear in the  
picture. If the signal is extremely weak, the  
installation of a larger external antenna may  
be necessary.  
After playing, store the disc in its case. Do not expose the disc to direct  
sunlight or sources of heat and never leave it in a parked car exposed to  
direct sunlight.  
Cleaning discs  
Radio frequency  
interference (RFI)  
Caused by two-way radios, this type of  
interference produces moving ripples or  
diagonal streaks in the picture. Some cases  
may cause a loss of contrast in the picture.  
Changing the direction and position of the  
antenna or installing an RFI filter may  
improve the picture.  
Fingerprints and dust on the disc can cause poor picture quality and  
sound distortion. Before playing, clean the disc with a clean cloth. Wipe  
the disc from the center out.  
Picture size variations A slight picture size variation is normal when  
you adjust the contrast or brightness  
settings.  
Poor or no sound  
• Station or cable TV are experiencing  
problems. Tune to another station.  
• Check volume adjustments or muting.  
• Check for sources of possible  
interference.  
Do not use strong solvents such as alcohol, benzine, thinner,  
commercially available cleaners, or anti-static spray intended for older  
vinyl records.  
Poor or no picture  
• Station or cable TV are experiencing  
problems. Tune to another station.  
• Check antenna or cable TV connections.  
Reorient the antenna.  
Servicing  
• Check for sources of possible  
interference.  
Do not try to repair your TV yourself. There are no user-serviceable parts  
inside. Turn off your TV, unplug the power cord, then contact an  
authorized service center.  
• Check picture control adjustments.  
Poor reception on  
some channels  
• Station or cable TV are experiencing  
problems. Tune to another station.  
• Station signal is weak. Reorient the  
antenna to receive stronger station.  
• Check for sources of possible  
interference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
33  
Specifications  
Problem  
Solution  
Problem  
Solution  
Poor color or no color  
• Station or cable TV are experiencing  
problems. Tune to another station.  
• Make sure channels are set into memory.  
• Check picture control adjustments.  
• Check antenna or cable TV connections  
and reorient the antenna.  
Playback does not  
start when the title is  
selected  
Check the Parental setup.  
The audio soundtrack Multiple languages are not recorded on the  
or subtitle language is DVD disc.  
not changed when  
• Check for sources of possible  
interference.  
you play back a DVD  
No subtitles  
• Some discs have no subtitles.  
Picture wobbles or  
drifts  
• Station or cable TV are experiencing  
problems. Tune to another station.  
• Make sure channels are set into memory.  
• Cable TV company is scrambling signal.  
• Check antenna orientation.  
• Subtitles are cleared. Press SUBTITLE.  
The angle cannot be Multiple angles are not recorded on the DVD.  
changed  
“X” appears on the  
screen.  
The function chosen is prohibited by the  
player or the disc.  
No cable TV reception  
• Check all cable TV connections.  
• Set Signal Type option to the Cable  
mode.  
• Station or cable TV system problems. Try  
another station.  
Remote control  
The remote control  
does not function.  
• Aim at the remote control at the remote  
sensor.  
• Operate within about 15 feet (5 m) of the  
TV, or reduce the light in the room.  
• Clear the path of the beam.  
• The batteries are weak. Replace the  
batteries.  
Horizontal or diagonal • Check antenna connections, reorient  
bars on the screen  
antenna.  
• Check for sources of possible  
interference.  
No reception above  
channel 13  
• Make sure Signal Type option is in the  
appropriate mode.  
• If using an antenna, check UHF antenna  
connections.  
• Make sure that the batteries are inserted  
correctly.  
Specifications  
TV turns off  
• No broadcast on station tuned.  
• The Sleep Timer is set.  
• The power has been interrupted.  
General  
Closed captioning  
does not work  
• The TV station is experiencing problems  
or the program tuned is not closed  
captioned. Try another channel.  
• Check cable TV connection or VHF/UHF  
antenna, then reposition or rotate the  
antenna.  
120V AC 60 Hz  
Power supply  
Operation: 65 W  
Standby: 0.8 W  
Power consumption  
12.8 lbs. (5.8 kg)  
Weight  
• Set closed captioning in the menu.  
21.25 × 17.5 × 8.25 inches  
(53.7 × 43.95 × 20.7 cm)  
Dimensions  
Display is not shown in • Select the correct language in the menu  
(W×H×D)  
your language  
options.  
41°F - 104°F (5°C - 40°C)  
Operating  
Picture has a few  
bright or dark dots  
A few bright or dark dots on an LCD screen is  
normal. It does not affect the operation of  
this TV.  
temperature  
Less than 80%  
Operating humidity  
DVD problems  
Television  
Playback does not  
start  
• No disc is inserted.  
• The disc may be dirty. Clean the disc.  
• The disc may be incompatible.  
21.6 inches (548.0 mm) diagonal  
Transmission TFT color LCD panel  
1680 (H) × 1050 (V)  
Type  
Display method  
Number of pixels  
Viewing angle  
No picture  
No sound  
The TV selector is not set correctly.  
• Make sure that the input selector of the  
amplifier is set correctly.  
Left/Right 85/85 degrees  
Up/Down 80/80 degrees  
• The player is in the Special playback  
mode.  
NTSC standard  
ATSC standard (8VSB), QAM  
• Select the correct Audio Output position  
on the AV amplifier.  
Tuner type  
VHF  
UHF  
CATV  
2-13  
Picture is distorted  
The picture will be distorted occasionally.  
Receiving channels  
14-69  
during CUE or REVIEW  
14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-125 (100)-(125)  
01 (5A)  
You cannot stop  
playback, or search,  
slow-motion play,  
repeat play, or  
Some discs may not allow some functions.  
program play  
No on-screen display Select Display On.  
No surround sound  
The setup does not match your stereo  
system.  
The unit or remote  
Turn off the player and unplug the AC power  
operation keys are not cord for several minutes, then plug it in  
working  
again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
34  
Legal notices  
S-Video:  
Y-Input: 1.0 V (p-p), 75 ohms  
C-Input: 0.3 V (p-p), 75 ohms  
(RCA) 1 V p-p/75 ohms  
Inputs  
Video:  
Audio:  
(RCA) –8 dBm/50K ohms  
Component: (Y) 1 V (p-p), 75 ohms  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms  
HDMI:  
HDMI compliant (type A  
connector)  
HDCP compliant  
E-EDID compliant  
Suggested scan rates: 480p, 480i,  
720p, and 1080i  
HDMI/PC  
audio input  
alternative: 2-channel PCM  
32/44.1/48 kHz sampling  
frequency 16/20/24 bits per  
sample  
PC monitor: Mini-D-sub 15-pin x 1  
Antenna:  
VHF/UHF In 75 ohms coaxial  
Digital audio out: 0.5 Vp-p 75 ohms terminated  
Outputs  
Speaker  
1-3/16 inches x 2-13/16 inches  
(30.4 mm × 71.1 mm), 8 ohms (2)  
1.5 W + 1.5 W  
Audio output power  
DVD/CD player  
NTSC  
Signal system  
Applicable disc  
DVD (12 cm)  
CD (12 cm, 8 cm)  
CD: Wavelength: 790 nm  
Maximum output power: 7 mW  
DVD: Wavelength: 655 nm  
Maximum output power: 5 mW  
Pickup  
Remote control  
Accessories  
Batteries AAA (2)  
AC cord  
User Guide (with FCC information)  
Specifications are subject to change without notice.  
Legal notices  
FCC Part 15  
This device complies with Part 15 of the FCC Rules. Operation of this  
product is subject to the following two conditions: (1) this device may  
not cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply within the limits  
for a class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
• Consult the dealer or an experienced technician for help.  
FCC warning  
Changes or modifications not expressly approved by the party  
responsible for compliance with the FCC Rules could void the user’s  
authority to operate this equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
35  
Legal notices  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR  
One-Year Limited Warranty  
EXCLUSIVE REMEDY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR  
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED  
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA,  
LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX  
PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE  
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT,  
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND  
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH  
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY  
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND  
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS  
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE  
OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO  
PROVINCE.  
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new  
DX-LTDVD22-09 (“Product”), that the Product shall be free of defects in the  
original manufacture of the material or workmanship for a period of one (1)  
year from the date of your purchase of the Product (“Warranty Period”). This  
Product must be purchased from an authorized dealer of Dynex brand  
Products and packaged with this warranty statement. This warranty does not  
cover refurbished product. If you notify Dynex during the Warranty Period of  
a defect covered by this warranty that requires service, terms of this warranty  
apply.  
How long does the coverage last?  
The Warranty Period lasts for one year (365 days) from the date you  
purchased the Product. The purchase date is printed on the receipt you  
received with the Product.  
What does this warranty cover?  
Contact Dynex:  
For customer service please call 1-800-305-2204  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2008 Best Buy Enterprise Services, Inc.  
All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc.  
Registered in some countries. All other products and brand names are  
trademarks of their respective owners.  
During the Warranty Period, if the original manufacture of the material or  
workmanship of the Product is determined to be defective by an authorized  
Dynex repair center or store personnel, Dynex will (at its sole option): (1)  
repair the Product with new or rebuilt parts; or (2) replace the Product at no  
charge with new or rebuilt comparable products or parts. Products and parts  
replaced under this warranty become the property of Dynex and are not  
returned to you. If service of products and parts are required after the  
Warranty Period expires, you must pay all labor and parts charges. This  
warranty lasts as long as you own your Dynex Product during the Warranty  
Period. Warranty coverage terminates if you sell or otherwise transfer the  
Product.  
Copyrights  
This product incorporates copyright protection technology that is protected by method  
claims of certain US patents and other intellectual property rights owned by  
Macrovision Corporation & other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
How to obtain warranty service?  
If you purchased the Product at a retail store location, take your original  
receipt and the Product to the store you purchased it from. Make sure that  
you place the Product in its original packaging or packaging that provides the  
same amount of protection as the original packaging. If you purchased the  
Product from an online web site, mail your original receipt and the Product to  
the address listed on the web site. Make sure that you put the Product in its  
original packaging or packaging that provides the same amount of  
protection as the original packaging.  
Dolby Laboratories  
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
To obtain in-home warranty service for a television with a screen 25 inches or  
larger, call 1-888-BESTBUY. Call agents will diagnose and correct the issue  
over the phone or will have an Dynex-approved repair person dispatched to  
your home.  
Where is the warranty valid?  
DTS Digital Out™  
This warranty is valid only to the original purchaser of the Product in the  
United States, Canada, and Mexico.  
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide  
patents issued and pending. DTS and DTS Digital Out are registered trademarks and the  
DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights  
Reserved.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as lightning strikes  
HDMI™  
Accident  
Misuse  
Your TV incorporates HDMI™ technology. HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.  
Abuse  
Negligence  
Commercial use  
Modification of any part of the Product  
Plasma display panel damaged by static (non-moving) images  
applied for lengthy periods (burn-in).  
HDTV  
The “HDTV” logo is a trademark of CEA.  
This warranty also does not cover:  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage supply  
Attempted repair by anyone other than a facility authorized by Dynex  
to service the Product  
HIGH-DEFINITION TELEVISION  
Products sold as is or with all faults  
Consumables, such as fuses or batteries  
Products where the factory applied serial number has been altered or  
removed  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
08-1371  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.  
© 2008 Best Buy Enterprise Services, Inc. All rights reserved.  
DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other  
products and brand names are trademarks of their respective owners.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

EverFocus Camera Accessories EDH5102 User Manual
Fellowes Paper Shredder P50CM User Manual
FireplaceXtrordinair Indoor Fireplace 98500507 User Manual
Fisher Price High Chair T2684 User Manual
FujiFilm Digital Camera Zoom Date 110ez User Manual
Fujitsu VCR MB2198 01 User Manual
GE Microwave Oven JE1468K User Manual
Global Machinery Company Blower BV2400 User Manual
Global Machinery Company Saw LS236LS User Manual
Goodman Mfg Furnace GMS8 33 3 8 GAS FURNACE UNITS User Manual