Global Machinery Company Lawn Mower HM 350C User Manual

INSTRUCTION MANUAL  
350mm  
Hand  
Mower  
• Melbourne • Perth • Auckland • Hong Kong • Shanghai  
HM350C  
Taipei • New York • Verona • London • Paris  
Download from Www.Somanuals.com. All Manuals Search And Download.  
050308 ED2 JJ  
Specifications  
Dear Customer  
If you require any help with your product, whether it  
is a Warranty claim, spare part or user information,  
please phone our Help Line for an immediate response.  
Phone 1300 880 001 in Australia or 0800 445 721 in  
New Zealand.  
Cutting width:  
Height adjustment:  
Blade reels:  
350mm  
25mm – 75mm  
5 x 146mm  
210mm  
Wheel diameter:  
Roller diameter:  
Weight:  
45mm  
Introduction  
8.5kg  
Your new GMC tool will more than satisfy your  
expectations. It has been manufactured under stringent  
GMC Quality Standards to meet superior performance  
criteria.  
You will find your new tool easy and safe to operate,  
and, with proper care, it will give you many years of  
dependable service.  
Safety instructions  
The tool must be used only for its prescribed purpose.  
Any use other than those mentioned in this Manual will  
be considered a case of misuse. The user and not the  
manufacturer shall be liable for any damage or injury  
resulting from such cases of misuse.  
To use this tool properly, you must observe the safety  
regulations, the assembly instructions and the operating  
instructions to be found in this Manual. All persons who  
use and service the machine have to be acquainted with  
this Manual and must be informed about its potential  
hazards. Children and infirm people must not use this  
tool. Children should be supervised at all times if they  
are in the area in which the tool is being used. It is  
also imperative that you observe the accident prevention  
regulations in force in your area. The same applies for  
general rules of occupational health and safety.  
The manufacturer shall not be liable for any changes  
made to the tool nor for any damage resulting from such  
changes.  
WARNING. When using hand mowers, basic safety  
precautions should always be taken to reduce the risk of  
personal injury. Also, please read and heed the advice  
given in the additional important safety instructions.  
CAUTION. Carefully read through this entire Instruction  
Manual before using your new GMC Tool. Take special  
care to heed the Cautions and Warnings.  
Your GMC tool has many features that will make your job  
faster and easier. Safety, performance, and  
dependability have been given top priority in the  
development of this tool, making it easy to maintain  
and operate.  
Environmental protection  
Recycle unwanted materials instead  
of disposing of them as waste. All tools,  
hoses and packaging should be sorted,  
taken to the local recycling centre and  
disposed of in an environmentally  
safe way.  
Save these instructions  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Work area  
Maintain tools. Check for misalignment or binding of  
moving parts, breakage of parts and any other condition  
that may affect the tool’s operation. If damaged, have  
the tool repaired before use. Many accidents are caused  
by poorly maintained tools.  
Keep cutting tools sharp and clean. Properly  
maintained cutting tools with sharp cutting edges are  
less likely to bind and are easier to control.  
Keep work area clean and tidy. Before commencing  
mowing, check your lawn to ensure that the area is  
clean of debris such as stones and mulch. Remove all  
obstructing material from the lawn, otherwise the hand  
mower could pick up this debris and either damage the  
cutting blades or eject it causing possible injury to the  
user or other persons in the area.  
Keep visitors away from the work area. All visitors  
and onlookers, especially children and infirm persons,  
should be kept well away from where you are working.  
Do not let others in the vicinity make contact with the  
mower.  
Keep hands and feet well away from the cutting  
blades. Even when you want to clean the blades, do  
not insert your hands into the blade.  
Store tools safely. When not in use, tools should be  
locked up out of reach.  
Do not force the tool. The tool will do the job better  
and safer working at the rate for which it was designed.  
Dress correctly. Always wear safety footwear when  
cutting the lawn with this hand mower. Leather gloves  
are also recommended when working outdoors.  
Do not overreach. Keep your footing secure and  
balanced at all times.  
Use the tool, accessories etc., in accordance with  
these instructions and in the manner intended for  
the particular type of tool, taking into account the  
working conditions and the work to be performed.  
Use of the tool for operations different from intended  
could result in a hazardous situation.  
Service  
Have your tool serviced by a qualified repair  
personnel using only identical replacement parts.  
This will ensure that the safety of the tool is  
maintained.  
Unpacking  
Due to modern mass production techniques, it is unlikely  
that your mower is faulty or that a part is missing. If you  
find anything wrong, do not operate the mower until the  
parts have been replaced or the fault has been rectified.  
Failure to do so could result in serious personal injury.  
Look after your tools. Keep tools sharp and clean for  
better and safer performance. Follow the instructions  
regarding lubrication and accessory changes. Should the  
hand mower not be functioning correctly, it should be  
inspected by an authorized repair centre.  
Tool use and care  
Store idle tools out of the reach of children and do  
not allow persons unfamiliar with the tool or these  
instructions to operate the tool. Tools are dangerous in  
the hands of untrained users.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Know your product  
1. Lower handle  
2. Middle handle  
3. Upper handle  
3
4. Metal shroud  
5. Wheel  
6. Rotating blades  
7. Grass catcher (optional)  
N
A
Screws  
A
A = M6 x 25mm  
B = M6 x 30mm  
C = M6 x 35vmm  
Nuts  
N = M6  
C
N
2
B
B
N
7
1
4
6
5
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
F
G
2
1
E
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Carefully read the entire Instruction Manual  
before using this product.  
With continuing product development changes may  
have occurred which render the product received  
slightly different to that shown in this instruction  
manual. The manufacturer reserves the right to  
Before returning this product for a  
Warranty Claim or any other reason  
Please Call 1300 880 001 (Australia)  
or 0800 445 721 (New Zealand)  
change specifications without notice. Note:  
Specifications may differ from country to country.  
When you make your call, please have  
the following information at hand:  
GMC Product Type GMC Product Code  
A GMC Service Engineer will take your call and, in  
most cases, will be able to solve your problem over  
the phone.  
The GMC 777 Helpline operates from 7am to  
7pm, 7 days a week (EST). This allows you  
to contact GMC directly with any queries and  
technical questions you have regarding  
our products.  
You are welcome to use this phone-in service to  
make suggestions or give comments about any  
GMC product.  
45–55 South Centre Road  
Melbourne Airport  
Victoria, Australia 3045  
Tel: (03) 8346 1100 Fax: (03) 8346 1200  
Save this Manual for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Compaq Scanner P N DOC FB4B User Manual
Cuisinart Toaster CPT 440 User Manual
Curtis Flat Panel Television LCD2075 User Manual
Desa Staple Gun 31100 User Manual
Electro Voice Music Mixer MA 1212 User Manual
Estate Refrigerator TT18AK User Manual
Euro Pro Blender QB900Q 30 User Manual
Everpure Water System EV9266 12 User Manual
Exido Hot Beverage Maker 245 078 User Manual
Flowtron Outdoor Products Trimmer LE 900F User Manual