Global Machinery Company Drill GTX1850K User Manual

INSTRUCTION MANUAL  
Hammer Drill  
• Melbourne • Perth • Auckland • Hong Kong • Shanghai  
Taipei • New York • Verona • London • Paris  
GTX2450K  
050531 ED6 JJ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of symbols  
Dear Customer  
The rating plate on your tool may show symbols. These  
represent important information about the product or  
instructions on its use.  
If you require any help with your product, whether it  
is a Warranty claim, spare part or user information,  
please phone our Help Line for an immediate response.  
Phone 1300 880 001 in Australia or 0800 445 721 in  
New Zealand.  
Wear hearing protection.  
Wear eye protection.  
Wear breathing protection.  
Introduction  
Double insulated  
for additional protection.  
Your new GMC power tool will more than satisfy your  
expectations. It has been manufactured under stringent  
GMC Quality Standards to meet superior performance  
criteria.  
Conforms to relevant standards for  
electromagnetic compatibility.  
You will find your new tool easy and safe to operate,  
and, with proper care, it will give you many years of  
dependable service.  
CAUTION. Carefully read through this entire Instruction  
Manual before using your new GMC Power Tool. Take  
special care to heed the Cautions and Warnings.  
Your GMC power tool has many features that will make  
your job faster and easier. Safety, performance, and  
dependability have been given top priority in the  
development of this tool, making it easy to maintain  
and operate.  
Specifications  
GTX1850K  
Nominal  
battery charge: 18V  
GTX2450K  
24V  
Charger:  
230-240V ~ 50Hz 230-240V ~ 50Hz  
Batteries:  
2 x 1.5Ah  
2 x 1.5Ah  
3-5 Hours  
Charging time: 3-5 Hours  
Drill no  
load speed:  
0-350, 0-1250min-1 0-350, 0-1250min-1  
Torque settings: 20 Positions  
Drill chuck  
20 Positions  
Environmental protection  
Recycle unwanted materials instead of  
disposing of them as waste. All tools, hoses  
and packaging should be sorted, taken to  
the local recycling centre and disposed of  
in an environmentally safe way.  
capacity:  
13mm Keyless  
13mm Keyless  
Max drilling  
capacity:  
steel  
wood  
concrete  
13mm  
28mm  
13mm  
13mm  
32mm  
13mm  
Hammer impact  
frequency:  
0-5600,  
0-20,000 BPM  
0-5600,  
0-20,000 BPM  
Weight:  
2.1kg  
2.4kg  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Personal safety  
Safety instructions  
Stay alert, watch what you are doing and use  
common sense when operating a power tool. Do  
not use a power tool while you are tired or under the  
influence of drugs, alcohol, or medication. A moment  
of inattention while operating power tools may result in  
serious personal injury.  
WARNING. Read and understand all instructions. Failure  
to follow all instructions listed below may result in  
electric shock, fire and/or serious injury. The term  
“power tool” in all of the warnings below refers to your  
mains-operated (corded) power tool or battery-operated  
(cordless) power tool.  
Use safety equipment. Always wear eye protection.  
Safety equipment such as a dust mask, non-skid  
safety shoes, hard hat, or hearing protection used for  
appropriate conditions will reduce personal injuries.  
Avoid accidental starting. Ensure the switch is in the  
off-position before plugging in. Carrying power tools  
with your finger on the switch or plugging in power  
tools that have the switch on invites accidents.  
Remove any adjusting key or wrench before  
turning the tool on. A wrench or a key that is left  
attached to a rotating part of the power tool may  
result in personal injury.  
Save these instructions  
Work area  
Keep work area clean and well lit. Cluttered and dark  
areas invite accidents.  
Do not operate power tools in explosive  
atmospheres, such as in the presence of flammable  
liquids, gases, or dust. Power tools create sparks  
which may ignite the dust or fumes.  
Keep children and bystanders away while operating a  
power tool. Distractions can cause you to lose control.  
Electrical safety  
Power tool plugs must match the outlet. Never modify  
the plug in any way. Do not use any adapter plugs with  
earthed (grounded) power tools. Unmodified plugs and  
matching outlets will reduce risk of electric shock.  
Avoid body contact with earthed or grounded  
surfaces such as pipes, radiators, ranges and  
refrigerators. There is an increased risk of electric  
shock if your body is earthed or grounded.  
Do not overreach. Keep proper footing and balance at  
all times. This enables better control of the power tool  
in unexpected situations.  
Dress properly. Do not wear loose clothing or jewellery.  
Keep your hair, clothing and gloves away from moving  
parts. Loose clothes, jewellery or long hair can be  
caught in moving parts.  
If devices are provided for the connection of dust  
extraction and collection facilities ensure that these  
are connected and properly used. Use of these devices  
can reduce dust-related hazards.  
Do not expose power tools to rain or wet conditions.  
Water entering a power tool will increase the risk of  
electric shock.  
Do not abuse the cord. Never use the cord for carrying,  
pulling or unplugging the power tool. Keep cord away  
from heat, oil, sharp edges or moving parts. Damaged or  
entangled cords increase the risk of electric shock.  
When operating a power tool outdoors, use an  
outdoor extension cord suitable for outdoor use. Use  
of a cord suitable for outdoor use reduces the risk of  
electric shock.  
Power tool use and care  
Do not force the power tool. Use the correct power  
tool for your application. The correct power tool will  
do the job better and safer at the rate for which it  
was designed.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not use the power tool if the switch does not  
turn it on and off. Any power tool that cannot be  
controlled with the switch is dangerous and must  
be repaired.  
Disconnect the plug from the power source before  
making any adjustments, changing accessories, or  
storing power tools. Such preventive safety measures  
reduce the risk of starting the power tool accidentally.  
Store idle power tools out of the reach of children  
and do not allow persons unfamiliar with the power  
tool or these instructions to operate the power tool.  
Power tools are dangerous in the hands of untrained  
users.  
Additional safety instructions for drills  
Wear ear protectors with impact drills.  
Exposure to noise can cause hearing loss.  
Use auxiliary handles supplied with the tool.  
Loss of control can cause personal injury.  
If possible, always use clamps or a vice to hold your work.  
Always switch off before you put the drill down.  
Ensure that the lighting is adequate.  
Do not put pressure on the drill, such that it slows the  
motor down. Allow the drill bit to cut without pressure.  
You will get better results and you will be taking better  
care of your tool.  
Maintain power tools. Check for misalignment or  
binding of moving parts, breakage of parts and any  
other condition that may affect the power tool’s  
operation. If damaged, have the power tool repaired  
before use. Many accidents are caused by poorly  
maintained power tools.  
Keep the area free of tripping hazards.  
Do not let anyone under 18 years operate this tool.  
Only use accessory bits in good condition.  
Before drilling, check that there is sufficient clearance  
for the drill bit under the workpiece.  
Keep cutting tools sharp and clean. Properly  
maintained cutting tools with sharp cutting edges are  
less likely to bind and are easier to control.  
Use the power tool, accessories and tool bits etc.,  
in accordance with these instructions and in the  
manner intended for the particular type of power  
tool, taking into account the working conditions  
and the work to be performed. Use of the power tool  
for operations different from intended could result in a  
hazardous situation.  
Do not touch the bit after operation. It will be very hot.  
Keep your hands away from under the workpiece.  
Never use your hands to remove sawdust, chips or  
waste close by the bit.  
Rags, cloths, cord, string and the like should never be  
left around the work area.  
Support the work properly.  
If you are interrupted when operating the drill,  
complete the process and switch off before looking up.  
Service  
Periodically check that all nuts, bolts and other fixings  
are properly tightened.  
When using the drill, use safety equipment including  
safety glasses or shield, ear defenders, and protective  
clothing including safety gloves. Wear a dust mask if  
the drilling operation creates dust.  
Have your power tool serviced by a qualified repair  
personnel using only identical replacement parts.  
This will ensure that the safety of the power tool  
is maintained.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
If in doubt, do not plug in the tool. Using a power source  
with a voltage less than the nameplate rating is harmful  
to the motor.  
The tool must be used only for its prescribed purpose.  
Any use other than those mentioned in this Manual will  
be considered a case of misuse. The user and not the  
manufacturer shall be liable for any damage or injury  
resulting from such cases of misuse.  
To use this tool properly, you must observe the safety  
regulations, the assembly instructions and the operating  
instructions to be found in this Manual. All persons  
who use and service the machine have to be acquainted  
with this Manual and must be informed about its  
potential hazards.  
Children and frail people must not use this tool. Children  
should be supervised at all times if they are in the area  
in which the tool is being used. It is also imperative  
that you observe the accident prevention regulations in  
force in your area. The same applies for general rules of  
occupational health and safety.  
WARNING. Do not allow any liquid to come into contact  
with the charger. There is a danger of electric shock.  
To allow the battery pack to cool down after charging,  
do not place it in a hot environment such as a metal  
shed or open trailer left in the sun.  
The charger is not intended for any use other than  
charging the exact type of rechargeable battery pack as  
supplied with the charger.Any other use may result in  
the risk of fire, electric shock or electrocution.  
The charger and battery packs supplied with it are  
specifically designed to work together. Do not attempt  
to charge the battery pack with any other charger than  
the one supplied.  
Do not place any object on top of the charger as it  
could cause overheating. Do not place the charger near  
any heat source.  
Do not pull on the lead of the charger to disconnect it  
from the power source.  
Make sure that the charger cable is positioned where  
it will not be stepped on, tripped over or otherwise  
subjected to damage or stress.  
Do not use an extension cord unless it is absolutely  
necessary. The use of an improper extension cord could  
cause the risk of fire, electric shock or electrocution.  
Do not use the charger if it has been subjected to a  
heavy knock, dropped or otherwise damaged in any  
way. Take the charger to an authorised service centre  
for a check or repair.  
Do not disassemble the charger. Take it to an  
authorised service centre when service or repair is  
required. Incorrect re-assembly may result in the risk of  
fire, electric shock or electrocution.  
To reduce the risk of an electric shock, unplug the  
charger from the power supply before attempting to  
clean it. Removing the battery alone does not reduce  
the risk.  
The manufacturer shall not be liable for any changes  
made to the tool nor for any damage resulting from  
such changes.  
Even when the tool is used as prescribed it is not possible  
to eliminate all residual risk factors. The following hazards  
may arise in connection with the tool’s construction  
and design:  
Damage to the lungs if an effective dust mask is not worn.  
Damage to hearing if effective ear defenders are not worn  
Additional safety instructions for the charger  
Before using the charger, read all the instructions and  
cautionary markings on the charger and battery pack as  
well as the instructions on using the battery pack.  
Only charge your batteries indoors as the charger is  
designed for indoor use only.  
DANGER. If the battery pack is cracked or damaged in  
any other way, do not insert it in the charger. There is  
a danger of electric shock or electrocution.  
Never attempt to connect two chargers together.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not store or use the tool and battery pack in  
locations where the temperature may reach or exceed  
104°F (40°C) such as alongside sheds or metal  
structures in the summer.  
The charger is designed for use from a standard  
household electrical supply (230–240 volts). Do not  
attempt to connect the charger to a supply with a  
different supply.  
If you wish to charge a second battery pack, unplug  
the charger from the mains supply and leave it for at  
least 15 minutes. After this time you can charge a  
second battery pack.  
Additional safety instructions for the  
battery pack  
The battery pack for this tool has been shipped in a low  
charge condition.You should charge the battery pack  
fully before use.  
To ensure the longest battery life and best battery  
performance, always charge the battery when the air  
temperature is between 18–24°C. Do not charge the  
battery pack when the temperature is below 0°C, or  
above 40°C. This is important. Failure to observe  
this safety rule could cause serious damage to the  
battery pack.  
Do not incinerate the battery pack even if it is seriously  
damaged or can no longer hold a charge. The battery  
pack can explode in a fire.  
Never attempt to open the battery pack for any reason.  
If the plastic housing of the battery pack breaks open  
or cracks, immediately discontinue its use and do not  
recharge it.  
The battery pack utilizes nickel-cadmium cells.  
Cadmium is considered to be a toxic material. Use an  
environmentally safe disposal unit at a municipal  
waste disposal centre to dispose of a damaged or worn  
out battery.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Know your product  
This drill is mainly used for drilling  
in wood or metal sheet and  
screwdriving. Use the tool and  
accessories only for  
6
14  
intended applications.  
All other applications are  
expressly ruled out.  
1. Keyless chuck  
2.Torque adjustment/hammer  
selection collar  
3. Trigger with variable speed control  
4. Forward/reverse switch  
5. Side handle  
4
6. Side handle clamp knob  
7. Battery pack release tabs  
8. Rechargeable battery pack  
9. Slim line adaptor  
5
2
3
1
10. Charger  
11. LED Lights  
13 11 12  
12. Battery indicator button  
13. LED Light switch  
14. 2 Speed gear selector  
10  
7
8
9
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.Plug in the charger and switch  
on. The red LED indicator will  
show power to the adaptor and  
that charging is  
Unpacking  
Due to modern mass production techniques, it is unlikely  
that your GMC Power Tool is faulty or that a part is  
missing. If you find anything wrong, do not operate the  
tool until the parts have been replaced or the fault has  
been rectified. Failure to do so could result in serious  
personal injury.  
taking place.  
4.The battery charging time is  
approximately 3–5 hours. The  
red LED goes out when the  
charging cycle is complete.  
Turn off the charger power supply from the mains and  
then remove the battery from the line adaptor.  
Fitting and removing the battery pack  
To remove the battery pack from the drill firmly press the  
battery release tabs (7) at either side of the battery pack,  
and slide the battery backward out of the tool.  
To obtain the best life for the battery  
Never allow the drill to come to a complete stand still  
before recharging. The battery should be placed on charge  
whenever the battery is noticeably running down or the  
drill no longer performs a task it previously performed.  
Avoid conducting short charges. Make sure that the battery  
is fully charged every time by allowing the charger to  
complete its full charging cycle.  
Avoid allowing lose items like screws or nails etc to be  
stored with battery packs as these or similar items can  
short battery packs and cause a fire or explosion.  
Always unplug the charger when not in use and store in a  
dry secure place.  
To install the battery pack, align rails, on the tool with  
the tabs on the battery pack and slide the battery pack on  
to the drill. Ensure the battery  
pack is sitting straight on the  
foot and correctly entering the  
runners. The battery should  
slide fully on to the drill foot  
until the battery pack “clicks”  
into position.  
Battery charging  
Important. Before plugging in the power supply from the  
charger to the slim line adaptor always ensure that the  
plug is switched off at the mains.  
Important. The battery will be fully charged after 3-5  
hours, remove it from the charger after this time. Do not  
leave a battery charging for longer than 24 hours.  
Avoid charging or storing your battery in temperatures  
below 0ºC and above 40ºC.  
Battery indicator  
To activate the battery indicator feature first pull the  
trigger switch (3) then press the battery indicator button  
(12), this will display the level  
of charge remaining in the  
1.Align and slide the slim line  
adaptor (9) onto the battery  
until the battery pack latches  
“click” into position. Check  
the adaptor is flush with the  
battery and there is a firm  
connection.  
2.Connect the power supply  
from the charger to the slim  
line adaptor via the socket in  
the rear of the adaptor housing.  
battery. There are 3 levels of  
charge low, medium and high.  
When the battery indicator is  
showing only 1 LED (low) the  
battery should be removed and  
put on the charger.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
LED Work area light  
Drilling positions  
The drill has 3 LED lights (11)  
to illuminate the work area and  
improve vision when drilling in  
areas with insufficient light.  
To turn the LED lights on and  
off depress the LED light switch  
(13).  
This symbol indicates the DRILLING MODE. Used for  
all normal drilling (Wood, Aluminium, and Steel) in  
this mode the clutch is deactivated.  
This symbol indicates the HAMMER MODE. This mode  
will activate hammer action, whilst drilling. For best  
results in hammer mode, set the gear selector to  
high gear.  
Using the drill  
Torque adjustment/hammer selection collar  
By rotating the torque adjustment/hammer selection collar  
(2) behind the chuck, it is possible to adjust the torque to  
each of nineteen settings, or select hammer action or the  
drill setting.  
The range of nineteen torque settings allows better control  
when using the drill as a screwdriver as it prevents over-  
tightening of the screws.  
The symbols circling the collar are used to indicate the  
level of torque. The larger the symbol on the collar, the  
higher torque and the larger the fastener which can be  
driven. To select any of the symbols, rotate the collar  
(2) until the desired symbol aligns with the arrow head  
indicator on the housing.  
Use the forward/reverse switch (4) to select the direction  
of rotation, then pull the trigger (3). This trigger switch is  
an electronic variable speed control which enables the user  
to vary the speed continuously. The speed varies according  
to how far the trigger switch is depressed, the further it is  
depressed the faster the chuck will rotate and the lighter it  
is depressed, the slower it will rotate.  
To stop the drill, release the trigger switch.  
2 Speed gearbox  
The 2 Speed Gearbox allows  
you to select a gear with the  
optimum speed and torque to  
suit the application.  
Note. When changing the gear  
selector ensure the drill is not  
operating.  
Note. You can only change the direction of rotation of the  
drill using the forward/reverse switch when the trigger is  
NOT depressed.  
Forward/reverse switch  
This switch (4) will allow you  
to change the direction of  
the motor while the trigger  
switch is not depressed.  
Drilling uses the forward mode.  
The reverse mode is intended for  
the removal of screws.  
1.To select the LOW gear (low speed, high torque setting),  
push the gear selector (9) forward, towards the chuck.  
The word LOW will be displayed.  
2. To select the HIGH gear (high speed, low torque  
setting), push the gear selector (9) back, away from the  
chuck. The word HIGH will be displayed.  
Download from Www.Somanuals.co1m0. All Manuals Search And Download.  
application and tighten the side handle clamp knob (6)  
to secure it in place.  
Inserting and removing bits  
The drill is fitted with auto spindle lock which means if you  
try and rotate the chuck by hand the spindle of the drill  
will automatically lock. This means you only need to grasp  
the chuck and rotate the chuck housing to remove or fit  
accessories.  
This drill has a keyless chuck, hence a chuck key is not  
needed to secure a bit in the drill. Always set the forward/  
reverse switch (4) to the locked ‘OFF’ position when  
installing and removing bits. It is also recommended to  
remove the battery pack to avoid unintentional starting.  
1. Open the chuck jaws by firmly holding the chuck  
housing and rotating the  
housing in an anti-clockwise  
direction. Open the jaws  
sufficiently so as to fit the  
desired accessory.  
Drilling  
Drilling metals  
For maximum performance, use high speed steel bits for  
metal or steel drilling.  
Ensure that the torque adjustment / hammer selection  
collar (2) is in normal drilling mode.  
Begin drilling at a very low speed to prevent the bit from  
slipping off the starting point.  
Always clamp sheet metal.  
Support thin metal with a block of wood to avoid  
distorting it.  
Use a punch to mark the centre of the hole.  
Use a suitable lubricant for the material you are working on.  
2. Ensure the accessory is fully  
inserted, so that the jaws of  
the chuck grip onto the flat  
section of the accessory.  
Use:  
for:  
Oil  
Steel  
Turpentine or paraffin  
Do not lubricate  
Aluminium  
Brass, copper or cast iron  
3. To firmly clamp the accessory in the chuck, grasp  
the chuck housing and rotate the chuck housing in a  
clockwise direction. Ensure the bit is retained firmly or  
damage to the chuck jaws can result.  
Drilling plastics and plastic coated chipboard  
Use high speed drill bits  
See drilling wood below  
4. To remove the accessory, open the chuck jaws by firmly  
holding the chuck housing and rotating the housing in  
an anti clockwise direction. Open the jaws sufficiently so  
as to remove the specific accessory.  
Drilling masonry  
For maximum performance use carbide-tipped masonry  
impact bits when drilling holes in brick, tile, concrete etc.  
Turn the mode selector to hammer mode, then rotate the  
torque collar to the drill position.  
Apply light pressure and medium speed for best results  
in brick.  
Apply additional pressure and high speed for hard  
materials such as concrete.  
When drilling holes in tile, practice on a scrap piece to  
determine the best speed and pressure.  
Adjustable side handle  
1.Turn the side handle clamp  
knob (6) anti-clockwise  
to loosen the collar fully and  
slip it over the chuck (1) onto  
the drill.  
2.Adjust the position of the side  
handle (5) to suit the  
Download from Www.Somanuals.co1m1. All Manuals Search And Download.  
Drilling wood  
For maximum performance, use high speed steel bits for  
wood drilling.  
Chuck installation  
1. Screw the chuck on  
by hand as far as  
it will go and insert  
screw (LH thread).  
2. Tighten the chuck  
around the shorter  
end of hex key (not  
supplied) strike the  
longer end in the  
clockwise direction with a  
wooden mallet.  
3. Remove the hex key and open the jaws fully. Tighten  
the screw in the centre of the chuck firmly, with the hex  
key in an anti-clockwise direction.  
Ensure that the mode selector is in normal drilling mode.  
Begin drilling at a very low speed to prevent the bit from  
slipping off the starting point. Increase the speed as the  
drill bites into the material.  
When drilling through holes, place a block of wood  
behind the work piece to prevent ragged or splintered  
edges on the back side of the hole.  
Warning. Never attempt to lock the trigger switch in the  
on position, do not lock the trigger on jobs where your  
hammer drill may need to be stopped suddenly.  
All drilling operations  
Mark off the centre of the hole using a centre punch  
or nail.  
Maintenance  
Store the tools, instruction manual and where necessary  
the accessories in the original packaging. In this way  
you will always have all the information and parts ready  
to hand.  
Chuck replacement  
Chuck removal  
Always wear eye protection.  
Do not throw used batteries into fire or water. There is  
a danger of explosion! Please hand in non-working or  
used batteries, or tools with built-in batteries, to the  
environmentally-safe disposal unit at a municipal waste-  
disposal centre, or to your dealer.  
Turn the torque adjustment collar/hammer selection collar  
(2) to the “drill” position and low gear, on the gear  
selector (14). Tighten the chuck around the shorter end  
of a hex key (not supplied) of 5mm or greater size. Using  
a wooden mallet or similar object, strike the longer end in  
the clockwise direction. This will loosen the screw inside  
the chuck.  
1. Open chuck jaws fully.  
2. Insert a 5mm hex key into front of chuck between jaws to  
engage screw head. Remove screw by turning clockwise.  
3. Place the hex key in chuck and  
tighten. Using a wooden mallet  
or similar object, strike key  
sharply in the anti-clockwise  
direction. This will loosen  
the chuck so that it can be  
unscrewed by hand.  
Download from Www.Somanuals.co1m2. All Manuals Search And Download.  
Download from Www.Somanuals.co1m3. All Manuals Search And Download.  
Download from Www.Somanuals.co1m4. All Manuals Search And Download.  
Download from Www.Somanuals.co1m5. All Manuals Search And Download.  
Carefully read the entire Instruction Manual  
before using this product.  
With continuing product development changes may  
have occurred which render the product received  
slightly different to that shown in this instruction  
manual. The manufacturer reserves the right to  
Before returning this product for a  
Warranty Claim or any other reason  
Please Call 1300 880 001 (Australia)  
or 0800 445 721 (New Zealand)  
change specifications without notice. Note:  
Specifications may differ from country to country.  
When you make your call, please have  
the following information at hand:  
GMC Product Type GMC Product Code  
A GMC Service Engineer will take your call and, in  
most cases, will be able to solve your problem over  
the phone.  
The GMC 777 Helpline operates from 7am to  
7pm, 7 days a week (EST). This allows you  
to contact GMC directly with any queries and  
technical questions you have regarding  
our products.  
You are welcome to use this phone-in service to  
make suggestions or give comments about any  
GMC product.  
45–55 South Centre Road  
Melbourne Airport  
Victoria, Australia 3045  
Tel: (03) 8346 1100 Fax: (03) 8346 1200  
Save this Manual for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Compaq Switch 2 8V User Manual
Conair Hair Dryer SB1X User Manual
Craftsman Trimmer 17274815 User Manual
Crown Audio Music Mixer 140MAx User Manual
Eclipse Fujitsu Ten Car Stereo System CD5030 User Manual
Electro Voice Microphone EX 18 User Manual
Euro Pro Carpet Cleaner EP63CH User Manual
Faber Ventilation Hood Island Mount Canopy Rangehood User Manual
FUNAI TV VCR Combo F3809U User Manual
Garland Cooktop GI MO DU 10000 650 User Manual