2x1 DisplayPort
KVM
EXT-DPKVM-241
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1
2
3
4
5
6
7
8
9
Introduction
Operation Notes
Features
Panel Layout
Panel Descriptions
Connecting And Operating The 2x1 DisplayPort KVM
Operating The 2x1 DisplayPort KVM
RMT-2IR Remote Control Description
RMT-2IR Remote Installation
10 Infrared (IR) Code Channel Configuration
11 RS-232 Serial Control Interface
12 Additional Switching Options
13 Specifications
14 Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Congratulations on your purchase of the 2x1 DisplayPort KVM. Your complete
satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen 2x1 DisplayPort KVM
The 2x1 DisplayPort KVM Switcher allows effortless switching of DisplayPort
between two computers using just one display and one USB2.0 port for a
keyboard and mouse. Audio, video and control signals are switched for each
computer upon selection, providing an easy and effective method of accessing
two computers from one workstation without the hassle of network. Switching can
also be performed through the front panel Select button, IR remote control or via
RS232.
How It Works
DisplayPort’s plug-and-play construction and compact connector enables faster,
easier installations with less chance of errors.
Connect a DisplayPort display and USB 2.0 keyboard/mouse to the Switcher’s
outputs. Connect both computers’ DisplayPort, USB and audio ports to the
Switcher’s inputs using the supplied cables. The Switcher is compatible with both
Macintosh and PC keyboards, mice and displays.
Note: If the source and/or display is not DisplayPort compliant, a protocol-
specific protocol adapter will be required in order to connect the source to the
Switcher and/or the Switcher to the high-resolution display.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 2X1 DISPLAYPORT KVM
•
Display Information (EDID) is normally required by source/host devices to
determine the capabilities of the attached peripherals. The 2x1 DisplayPort
KVM features complete EDID passthrough. This means that when EDID
is present on the output device, it will be passed to the active source/host
device.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Features
•
Switches one High-Resolution Display between two DisplayPort-equipped
computers with audio/video and USB keyboards
•
•
•
Compact connector for easier installations
Switches up to 2560x1600 maximum resolution
Supports RGB and YCbCr color spaces
Package Includes
(1) DisplayPort KVM Switcher
(2) 6-foot DisplayPort cable
(2) 6-foot USB 2.0 cable
(2) 6-foot 3.5mm mini-stereo audio cable
(1) 5V DC Universal Power Supply
(1) IR Remote Control
(1) User’s Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL LAYOUT
Front Panel
1
2
3
3
4
Back Panel
5
7
7
9
11
12
13
6
8
9
10
12
13
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL DESCRIPTIONS
1
2
LED Power Status Indicator
This LED will be active once power is being supplied by the included 5V power
supply.
Infrared (IR) Receiver
This IR receiver will accept switching commands from the included RMT-2IR
remote control.
3
4
5
LED Input Status Indicator 1 & 2
This currently selected source input will be indicated with an active LED.
Input Selector Button
Pressing this button will cycle the input, 1 or 2, which will be selected for output.
RS-232 Communications Input
Switching commands can be initiated by using a serial communications device
and this port. For more information please see page 11.
6
7
5V DC Power Input
This receptacle will accept power via the included 5V DC power supply.
DisplayPort Input 1 & 2
This port will accept a single standard DisplayPort source device. Two ports are
available for use.
8
9
DisplayPort Output
This port will accept a single standard DisplayPort output device. The currently
selected DisplayPort input source will be output via this port.
3.5mm Analog Audio Input 1 & 2
This port will accept audio from a single 3.5mm analog mini-jack source. Two
ports are available for use and are associated with DisplayPort inputs 1 & 2,
respectively.
10 3.5mm Analog Audio Output
This port will accept a single 3.5mm analog mini-jack cable for connection to an
amplified audio device. The currently selected audio input source will be output
via this port.
11 Infrared (IR) Receiver Extension
This port will accept an optional IR Receiver Extension product (part# EXT-RMT-
EXT-IR) for relocation of the IR receiver. This port can be used for additional
switching options. Please see page 12 for more information.
12 USB Type A Port
This port will accept a USB Type A device for use by the source device. Two
ports for the simultaneous connection of two USB devices.
13 USB Type B Port 1 & 2
This port will accept a single USB Type B cable for connection to a USB source
device. Two ports are available for use and are associated with DisplayPort
inputs 1 & 2, respectively.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING AND OPERATING THE 2X1 DISPLAYPORT KVM
Connecting Source Devices to the 2x1 DisplayPort KVM
1. Connect up to two DisplayPort source devices (i.e. Computer Video Output)
to the DisplayPort inputs on the 2x1 DisplayPort KVM using the included
DisplayPort cables. DisplayPort Input 1 will be routed to the DisplayPort
output when Input 1 is selected, and DisplayPort Input 2 will be routed to the
DisplayPort output when Input 2 is selected.
2. Connect up to two audio sources (i.e. Computer Audio Output) to the 3.5mm
analog audio mini-jack inputs using the included audio cables. Audio Input 1
will be routed to the audio output when Input 1 is selected, and Audio Input 2
will be routed to the audio output when Input 2 is selected.
3. Connect up to two USB source devices (i.e. Computer’s USB port) to the
USB Type B inputs using the included USB Type A to B cables. USB Input 1
will be routed to the connected USB devices when Input 1 is selected, and
USB Input 2 will be routed to the connected USB devices when Input 2 is
selected.
Connecting Output Devices to the 2x1 DisplayPort KVM
1. Connect a DisplayPort device (i.e. DIsplayPort Display) to the DisplayPort
output on the 2x1 DisplayPort KVM using a user/device supplied DisplayPort
cable.
2. Connect an audio device (i.e. Audio Amplifier) to the 3.5mm analog audio
mini-jack output using a user supplied 3.5mm analog audio cable.
3. Connect up to two USB devices (i.e. Keyboard & Mouse) to the USB Type A
inputs using user/device supplied USB cables.
Connecting Power to the 2x1 DisplayPort KVM
1. Connect the included 5V power supply to the power receptacle on the 2x1
DisplayPort KVM.
2. Connect the opposite end of the power supply to an open wall socket power
source.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE 2X1 DISPLAYPORT KVM
How to Operate the 2x1 DisplayPort KVM
Switching can be accomplished via the front panel selector button, infrared (IR)
remote control, or the RS-232 communications port. Additional switching options
can be found on page 12
1
2
3
For information on switching via the front panel selector button, please see
this page.
For information on switching via the infrared (IR) remote control, please see
page 8.
For information on switching via RS-232 serial communications, please see
page 11.
Switching - Front Panel Selector Button
Switching can be accomplished via the front panel selector button. This button
will alternate between Inputs 1 & 2. Each press of this button will change the
selected input.
Front Panel Input Selector
7
Download from Www.Somanuals.com. All Manuals Search And Download.
RMT-2IR REMOTE CONTROL DESCRIPTION
1
2
1
2
Pressing this button will select Input 1 as the source. All devices connected to
the input ports labeled 1 will be selected and output.
Pressing this button will select Input 2 as the source. All devices connected to
the input ports labeled 2 will be selected and output.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
RMT-2IR REMOTE INSTALLATION
To use the RMT-2IR remote, remove the battery cover on the back of the remote to
reveal the battery compartment. Insert the included battery into the open battery slot.
The positive (+) side should be facing up. Ensure that both DIP (Dual Inline Package)
switches are in the OFF position. Replace the battery cover. The remote ships with 2
batteries. One battery is needed for operation and the other battery is complimentary.
Empty Battery Slot
IR Code Dip Switches
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INFRARED (IR) CODE CHANNEL CONFIGURATION
How to Resolve IR Code Conflicts
In the event that IR commands from other remote controls conflict with the
supplied RMT-2IR remote control, changing the remote channel will alleviate
this issue. The RMT-2IR remote control and the 2x1 DisplayPort KVM both have
banks of DIP (Dual Inline Package) switches for configuring the remote channel
that both units use to communicate. These settings must exactly match each
other for proper operation.
The DIP switch bank on the RMT-2IR is located underneath the battery cover.
DIP switch banks for the 2x1 DisplayPort KVM are located on the underside of
the unit beneath a black piece of metallic tape. Switches 1 and 2 on the RMT-2IR
directly correspond to DIP Switches 1 and 2 on the 2x1 DisplayPort KVM. Only
switches 1 and 2 (of 4 in that bank) are used for IR Code settings.
Remote Channel 1:
Default
Remote Channel 2:
Remote Channel 4:
1
1
2
2
1
1
2
2
Remote Channel 3:
Left: Picture of the opened rear battery
compartment of the RMT-2IR remote showing
the exposed DIP Switch bank between the
battery chambers.
2x1 DisplayPort KVM DIP Switch Settings
Remote Channel 1:
Default
Remote Channel 2:
1
1
3
3
2
2
4
4
1
1
3
3
2
2
4
4
Remote Channel 3:
Remote Channel 4:
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 SERIAL CONTROL INTERFACE
What features are available via the RS-232 serial communications port?
The 2x1 DisplayPort KVM can accept commands through the RS-232 serial
communications port located on the rear panel. The current RS-232 control
features are:
•
Switching of inputs.
How do I use these features?
These features were initially intended for utilization by custom installers in
automated setups. However, these features can be tested by using any Windows
PC with the Hyperterminal program.
What pins are used for communication with the 2x1 DisplayPort KVM?
Only pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used for communication.
A null-modem adapter should not be used with this product.
5 4 3 2 1
1 2 3 4 5
9 8 7 6
6 7 8 9
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface
What are the communication port settings?
Bits per second ............................................................................................ 19200
Data bits ............................................................................................................... 8
Parity ............................................................................................................. None
Stop bits ................................................................................................................1
Flow Control .................................................................................................. None
Switching/Routing Binary Table
ASCII
RMT-2IR
Button
Binary
1
2
1
2
0011 0001
0011 0010
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL SWITCHING OPTIONS
The underside of the 2x1 DisplayPort KVM features a DIP swich bank that is
used to configure additional features. Specifically, DIP switches 3 & 4 will control
the function of the IR Extender port on the rear panel.
This port can be
configured to accept
additional switching
devices
DIP SWITCH
Function
IR Channel
1
2
3
4
IR Channel
Remote/Closure
IR Extender
DIP Switch 3
Enabling DIP switch 3 will allow the user to utilize a contact closure type of
remote control such as Gefen product # EXT-RMT-2 to initiate input switching. By
default, this switch is in the OFF position and will rely on the standard switching
methods outlined previously in this manual.
DIP Switch 4
DIP switch 4 is the master switch that will enable/disable the ability to use an
IR remote extender (Part# EXT-RMT-EXTIR) for relocation of the IR receiver.
By default, this switch is in the OFF position and will disable the use of an IR
Extender.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Input Connector ................................................. (2) DisplayPort (from computers)
Output Connector ........................................................ (1) DisplayPort (to display)
Input Connector:........................................(2) USB 2.0 Type “B” (from computers)
Output Connector: ...............................(2) USB 2.0 Type “A” (to keyboard/mouse)
Input Connector ............................. (2) 3.5mm analog L/R audio (from computers)
Output Connector ............. (1) 3.5mm analog L/R audio (to speakers or amplifier)
Color Spaces ............................................................................... RGB and YCbCr
Maximum Resolution ............................................................................ 2560x1600
Shipping Weight ............................................................................................ 6 lbs
13
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Gefen warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen is notified within two (2)
years from the date of shipment, Gefen will, at its option, repair or replace the
equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifications. Equipment that fails under conditions
other than those covered will be repaired at the current price of parts and labor in
effect at the time of repair. Such repairs are warranted for ninety (90) days from
the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including
without limitation, any implied warranty or merchantability or fitness for any
particular purpose, all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from
Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their
original condition.
The information in this manual has been carefully checked and is believed to
be accurate. However, Gefen assumes no responsibility for any inaccuracies
that may be contained in this manual. In no event will Gefen be liable for
direct, indirect, special, incidental, or consequential damages resulting from
any defect or omission in this manual, even if advised of the possibility of such
damages. The technical information contained herein regarding the features and
specifications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return
PRODUCT REGISTRATION
Please register your product online by visiting the Register Product page
under the Support section of the Gefen Web site.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rev A1
20600 Nordhoff St., Chatsworth CA 91311
1-800-545-6900 818-772-9100 fax: 818-772-9120
Pb
This product uses UL listed power supplies.
Download from Www.Somanuals.com. All Manuals Search And Download.
|