DALLAS 10
User guide
If you are using this telephone with a hearing aid, set your
hearing aid to the «T» setting
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP
2 - RINGER SETTINGS
A switch located on right side allows the ringer to
be switched On ( ) or Off ( ).
3 - WALL MOUNTING
To wall-mount your telephone,slide out the clip turn
around and slide back into the wall mounting posi-
tion (located in the base unit, just below the ear
piece).This will ensure that the handset stays firmly
in position. Make 2 holes in the wall 85mm apart,
insert the wall plugs and the wall mounting screws.
The screws should protrude from wall by 6-7 mm.
Place the phone onto the screw-heads and slide
down to secure.
4 - TONE/PULSE SWITCH (T/P)
The Tone/Pulse switch is factory pre-set to Tone
position (T).In the UK,all telephone exchanges now
use Tone dialing. If your phone does not dial out it
is probably being used from an older private switch
board (PBX). In this case, the Tone/Pulse switch
must be moved to Pulse (P).
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PHONE
1 -ANSWERING INCOMING CALL
- When an incoming call is received the phone will
ring and flash. To answer the call lift the handset
and speak.
- On completion of the call, carefully replace the
handset in the cradle to release the line.
2 - VOLUME RECEIVING ADJUSTMENT
You can increase the volume according to your
own hearing requirements.
Use the VOL button, located on the right side, to
adjust the level according to your own hearing
requirements.
VOL
0dB
+15dB
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PHONE
3 - MAKING A CALL
- Lift the handset.
-Await the dial tone and dial required number.
- On completion of the call, carefully replace the
handset in the cradle.
4 - SENDING LEVELADJUSTMENT
If your voice is quiet or called parties have difficulty
hearing you, you can increase the sending level
volume with the switch
located on the right
side.
0dB
+4dB
5 - LAST NUMBER REDIAL
- Lift the handset.
- Await the dial tone and press
button.
- The previously dialled number will be automaticaly
redialled (not in use for memory numbers).
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PHONE
6 - R, * & # BUTTONS
These are used with the new services provided on
digital exchanges. For details please contact your
network operator.
7 - STORING TELEPHONE NUMBERS
Your phone can store 3 direct and 10 indirect
memories (16 digits maximum for each memory).
- Lift the handset.
- Press
- Dial the telephone number you wish to store.
- Press button.
button.
- Press one of the direct memory buttons, M1, M2,
M3.
Or press MEM and any button 0 to 9 on the key
pad under which you wish to store the telephone
number in indirect memory.
- Replace the handset.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PHONE
Note : Numbers will be lost if you disconnect your
phone. Entering a new number in memory will
automatically erase the previous number.
8 - DIALLING STORED NUMBER
- Lift the handset and await the dial tone.
- Press appropriate direct memory button M1, M2,
or M3. The stored number will be dialled out
automatically.
Or press the MEM button followed by the keypad 0
to 9 button under which the desired number is
stored. The stored number will be dialled out
automatically.
To register your stored phones numbers, use the
index located on the base.
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of one year. During this time, all repairs
or replacements (at our option) are free of charge.Should you
experience a problem then contact our helpline or visit our website
negligence or breakages to any parts. The product must not be
tampered with or taken apart by anyone who is not an authorised
Geemarc representative.The Geemarc guarantee in no way limits
your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE
AND MUST BE RETAINED AND PRODUCED IN THE EVENT
OFAWARRANTY CLAIM
Please note: The guarantee applies to the United Kingdom only.
Declaration : Hereby Geemarc Telecom SA declares that this product is in
compliance with the essential requirements and other relevant provisions of
the Radio and Telecommunications Terminal Equipment Directive 1999/5/EEC
and in particular article 3 section 1a, 1b and section 3.
Telephone connection : Voltages present on the telecommunication network
are classified TNV-3 (Telecommunication Network Voltage) according to the
EN60950 standard.
For product support and help visit our website
telephone 01707 384438
or fax 01707 372529
UGDAL10 ED01
Download from Www.Somanuals.com. All Manuals Search And Download.
|