Gateway Computer Monitor FPD1950 User Manual

FPD1950 Monitor  
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Using Your FPD 1950 Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Connecting the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Starting the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Adjusting monitor settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
External controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
On-screen display options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Software controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Video modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Energy declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
No power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
No picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Display colors are wrong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Picture has shadows or “ghosts” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Color is not uniform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Image is not sized or centered correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
The monitor has pixels that are always dark or too bright . . . . . . . . . . . . . . . . . . . . . . 18  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Safety, Regulatory, and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gateway  
Using Your FPD 1950 Monitor  
Connecting the monitor  
Starting the monitor  
Adjusting monitor settings  
Maintenance and troubleshooting  
Specifications  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the monitor  
To connect the monitor:  
1 Position your computer and the monitor so you can reach the connections on each.  
2 Lay the monitor on its back, then connect the power cord to the power connector  
under the bottom of the screen.  
3 If your computer supports analog video (blue video connector), connect the analog  
video cable to the blue analog connector under the bottom of the screen.  
- OR -  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
If your computer supports digital video (white video connector), connect the digital  
video cable to the white DVI connector under the bottom of the screen.  
Important  
Make sure that you only connect one video cable to the monitor and  
computer. The only way to use both connections it to share the  
monitor between two computers. Use the SOURCE button to change  
between computers. For more information, see “Adjusting monitor  
settings” on page 6.  
4 Return the monitor to its upright position, then make sure that your computer is  
turned off.  
5 If you connected the analog video cable to your monitor, connect the other end of  
the cable to the matching blue video port on the back of your computer.  
- OR -  
If you connected the digital video cable to your monitor, connect the other end of  
the cable to the matching white video port on the back of your computer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Plug the power cord into a grounded electrical outlet.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting the monitor  
To start the monitor:  
1 Press the power button on the front of monitor. The power LED on the power button  
turns on.  
Power button  
2 Turn on your computer.  
3 After your computer is running, the power LED on the monitor’s power button should  
be blue. Allow about 10 seconds for the display image to appear. If the power LED is  
not blue or you do not see a display image, check the connections. For more  
troubleshooting information, see “Troubleshooting” on page 16.  
4 Adjust the tilt of the monitor for the best viewing angle.  
5 After you see the Windows desktop, press the AUTO/SELECT button to automatically  
adjust your display image to the ideal settings.  
6 Use the on-screen display (OSD) to adjust other monitor settings. For more  
information, see “Adjusting monitor settings” on page 6.  
Important  
When adjusting the monitor settings, always press the  
AUTO/SELECT button before entering the OSD. This will  
automatically adjust the display image to the ideal settings for the  
current screen resolution.  
The best screen resolution is 1280 × 1024.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting monitor settings  
Use the external controls (located on the monitor itself) and software controls (accessible  
in Windows) to adjust the display image. For more information about software controls,  
see “Software controls” on page 10.  
External controls  
This monitor features an on-screen display (OSD) that lets you adjust and save contrast,  
brightness, and other settings for the monitor. The monitor saves changes you make to  
the settings, even if you turn off the monitor.  
Contrast/Brightness  
buttons  
Power button  
and LED  
SOURCE  
button  
LightView  
buttons  
MENU  
button  
AUTO/SELECT  
button  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOURCE  
Press to switch between analog or digital source signals or switch between computers  
if you have two computers connected to the monitor.  
MENU  
Press to view the OSD. Press again to exit.  
/LightView  
OSD active: Press to select OSD options.  
OSD inactive: Press to select a LightView preset viewing mode. Preset modes include  
optimized settings for text, movies, or photos in either day or night ambient light  
levels.  
/Contrast/Brightness  
OSD active: Press to adjust OSD options.  
OSD inactive: Press to open the Contrast/Brightness menu. You can then press  
to adjust the brightness, and press  
to adjust the contrast.  
AUTO/SELECT  
OSD active: Press to make a selection in the OSD.  
OSD inactive: Press to automatically optimize the monitor’s image position, clock,  
and phase.  
Power/LED  
Press this button to turn the monitor off and on.  
On-screen display options  
Adjusting OSD settings  
To adjust the OSD settings:  
1 Press the MENU button. The OSD menu opens.  
2 Use the  
and  
buttons to highlight a menu or control, then press the  
AUTO/SELECT button.  
3 Use the  
buttons to adjust the control to the desired level.  
4 Press the AUTO/SELECT button to return to the navigation bar on the left of the OSD.  
5 When you have finished making all adjustments, press the MENU button to exit.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locking the control buttons  
You can lock the control buttons to prevent them from being used to change display  
settings.  
To lock the control buttons:  
1 Press and hold the MENU and  
buttons together for five seconds.  
2 To unlock the controls, press and hold the MENU and  
buttons together for five  
seconds.  
OSD menus  
OSD Menu  
PICTURE  
Description  
BRIGHTNESS. Adjusts the amount of light in the  
darkest portion of the picture. Use the lowest  
brightness setting you are comfortable with to  
maximize the life of the monitor backlights.  
BRIGHTNESS  
You may need to readjust brightness after the monitor  
has warmed up.  
50  
50  
50  
CONTRAST  
GAMMA  
CONTRAST. Adjusts the level of white between the  
lightest and darkest portions of an image.  
GAMMA. Customizes the gamma level. High gamma  
levels increase white levels and low gamma levels  
increase contrast.  
MENU  
PRESET. Adjusts the color temperature.  
9300K is bluish white.  
COLOR  
6500K is reddish white (default).  
PRESET  
!
RED, GREEN, BLUE. Customizes the color levels.  
9300K  
6500K  
Press the  
button to move to the next color.  
RED  
50  
GREEN  
BLUE  
50  
50  
MENU  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Menu  
POSITION  
Description  
HORIZONTAL. Moves the display image left and right.  
VERTICAL. Moves the display image up and down.  
You can also use the AUTO/SELECT button to  
configure the vertical and horizontal position  
automatically.  
HORIZONTAL  
50  
50  
VERTICAL  
MENU  
CLOCK. Minimizes any vertical bars or stripes visible  
on the screen background. The horizontal screen size  
will also change.  
TRACKING  
PHASE. Minimizes any horizontal distortion and  
clears or sharpens the displayed characters.  
CLOCK  
PHASE  
50  
50  
MENU  
LANGUAGE. Changes the language of the OSD.  
SETUP  
OSD POSITION. Adjusts the OSD window position on  
the screen.  
LANGUAGE  
ENGLISH  
OSD POSITION  
HORIZONTAL  
WHITE BALANCE. Adjusts the color temperatures for  
truer colors.  
50  
50  
FACTORY RESET. Returns settings to the factory  
defaults.  
VERTICAL  
Mode Info. Displays current screen resolution.  
WHITE BALANCE  
FACTORY RESET  
NO  
NO  
ANALOG  
1280 X 1024 60Hz  
MENU  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software controls  
Color depth and screen resolution are two of the most basic monitor settings you may  
need to change.  
Adjusting the color depth  
Color depth is the number of colors your video card uses. Most images look best displayed  
with the maximum number of colors available.  
Windows lets you choose from several color depth settings for the monitor. We recommend  
that you use the 32-bit True Color setting or the highest setting available at all times.  
If the color in your images seems “false” or “jumpy,” especially after you have played a  
game or run a video-intensive program, check the color depth setting and return it to 32-bit  
True Color, if necessary.  
To change the color depth:  
1 Click Start, then click Control Panel. The Control Panel window opens. If your Control  
Panel is in Category View, click Appearance and Themes.  
2 Click/Double-click the Display icon. The Display Properties dialog box opens.  
3 Click the Settings tab.  
Gateway FPD 1940 on Intel(r) 82810E Graphics Controller  
4 Click the arrow button to open the Color quality list, then click the color depth you  
want.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Click OK, then click Yes to save your changes.  
Help and  
Support  
For more information about adjusting monitor settings, click Start,  
then click Help and Support.  
Type the keyword changing display settings in the Search box  
, then click the arrow.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the screen resolution  
You can change the screen resolution to a size you prefer. For example, you can increase  
the resolution to fit more icons on your desktop, or you can decrease the resolution to  
make reading and identifying objects on the monitor easier. The higher the resolution,  
the smaller individual components of the screen (such as icons and menu bars) appear.  
To change the screen resolution:  
1 Click Start, then click Control Panel. The Control Panel window opens. If your Control  
Panel is in Category View, click Appearance and Themes.  
2 Click/Double-click the Display icon. The Display Properties dialog box opens.  
3 Click the Settings tab.  
Gateway FPD 1940 on Intel(r) 82810E Graphics Controller  
4 Drag the Screen resolution slider to the size you prefer.  
5 Click OK, then click Yes to save your changes.  
Help and  
Support  
For more information about adjusting screen resolution, click Start,  
then click Help and Support.  
Type the keyword changing screen resolution in the Search box  
, then click the arrow.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clarifying screen fonts  
You can change the display fonts to ClearType for smoother screen fonts.  
To change the screen resolution:  
1 Click Start, then click Control Panel. The Control Panel window opens. If your Control  
Panel is in Category View, click Appearance and Themes.  
2 Click/Double-click the Display icon. The Display Properties dialog box opens.  
3 Click the Appearance tab.  
4 Click the Effects button. The Effects dialog box opens.  
5 Click to select the Use the following method to smooth the edges of screen type check box.  
6 Click the arrow to open the list, then click ClearType.  
7 Click OK.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video modes  
The monitor supports several video modes.  
Best video mode is 1280 × 1024 @ 6o Hz.  
The supported video modes are:  
Screen Resolution  
(display mode)  
Horizontal  
Frequency  
Vertical  
Frequency  
1
2
VGA  
VGA  
640 × 350  
720 × 400  
640 × 480  
640 × 480  
800 × 600  
800 × 600  
832 × 624  
1024 × 768  
1024 × 768  
1152 × 870  
1152 × 900  
1280 × 1024  
1280 × 1024  
31.47 kHz  
31.47 kHz  
31.47 kHz  
37.50 kHz  
37.88 kHz  
46.88 kHz  
49.73 kHz  
48.36 kHz  
60.12 kHz  
68.68 kHz  
61.81 kHz  
63.98 kHz  
79.98 kHz  
70 Hz  
70 Hz  
60 Hz  
75 Hz  
60 Hz  
75 Hz  
75 Hz  
60 Hz  
75 Hz  
75 Hz  
65 Hz  
60 Hz  
75 Hz  
3
VGA  
4
VESA  
VESA  
VESA  
MAC  
5
6
7
8
VESA  
VESA  
MAC  
9
10  
11  
12  
13  
VESA  
VESA  
VESA  
If you do not use the best mode for the monitor, the display image may look slightly  
“fuzzy.”  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power management  
ENERGY STAR  
As an ENERGY STAR® Partner, Gateway has determined that this product meets the  
ENERGY STAR guidelines for energy efficiency.  
This monitor complies with the EPA's International ENERGY STAR Program, which is a  
program designed to encourage manufacturers of computer equipment to build circuitry  
into their products to reduce energy consumption during time of non-use.  
Energy declaration  
When connected to a computer that supports the VESA Display Power Management  
Signaling (DPMS) Protocol, the monitor can conserve significant energy by reducing power  
consumption during periods of non-use. When your computer goes into the energy saving  
mode, the monitor will then enter the Active Off mode (different from total shut down).  
In the Active Off mode the Power LED will still show orange.  
Use these conventions and the power can be reduced to the following levels:  
VESA State  
On  
LED Indicator  
Blue  
Power Consumption  
45 W  
Active Off  
Orange  
3 W  
To “wake” the monitor when it is in Active Off mode, move the mouse or press any  
keyboard key.  
Access the power management options in the Control Panel to change the period of time  
after which the monitor enters these low power states.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
To keep the monitor in optimal working order:  
Do not block the ventilation holes.  
Do not expose the monitor to rain or use near water.  
Keep the monitor away from radiators or heat vents.  
Keep the monitor out of direct sunlight.  
To clean the monitor, use a soft cloth slightly moistened with water only. Wipe the cabinet,  
screen, and controls.  
Caution  
Do not use any type of abrasive pad or glass cleaner. You will  
permanently scratch the screen.  
Troubleshooting  
If you have problems with the monitor, the information in this troubleshooting section  
may help you solve them.  
Important  
Make sure that the monitor has warmed up for approximately  
30 minutes before making any judgments about the picture quality.  
No power  
Make sure that the power cord is connected correctly to both the back of the monitor  
and the wall outlet. For more information about connecting the power cord, see  
“Connecting the monitor” on page 2.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
No picture  
Make sure that the power cord is connected correctly to both the back of the monitor  
and the wall outlet. For more information about connecting the power cord, see  
“Connecting the monitor” on page 2.  
Make sure that the video cable is connected securely to the back of the monitor and  
computer. For more information about connecting the video cable, see “Connecting  
the monitor” on page 2.  
Make sure that the monitor is turned on.  
If you have two computers connected to the monitor, press the SOURCE button on  
the front of the monitor to switch between computers. For more information about  
the SOURCE button, see “External controls” on page 6.  
If the power LED is orange:  
Make sure that your computer is turned on.  
Move the mouse or press any key on the keyboard to bring the monitor out of  
Active Off mode.  
Restart your computer with the monitor turned on.  
Make sure that the video cable is not damaged.  
Check the ends of the video cable for any pins that might be bent or pushed in.  
Turn off the monitor and unplug the video cable from the back of your computer.  
Turn the monitor back on and wait for ten seconds. If the monitor is functioning  
correctly, a self-diagnostic screen appears. For more information about connecting the  
video cable, see “Connecting the monitor” on page 2.  
Display colors are wrong  
Press the AUTO/SELECT button to automatically adjust the display image to the  
ideal settings.  
Restart your computer with the monitor turned on.  
Make sure that the video cable is connected securely to the back of the monitor and  
your computer. For more information about connecting the power cord, see  
“Connecting the monitor” on page 2.  
Make sure that the video cable is not damaged.  
Check the ends of the video cable for any pins that might be bent or pushed in.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture has shadows or “ghosts”  
Press the AUTO/SELECT button to automatically adjust the display image to the  
ideal settings.  
Remove any extension cables or switchboxes.  
Make sure that the video cable is connected securely to the back of the monitor and  
your computer. For more information about connecting the power cord, see  
“Connecting the monitor” on page 2.  
Make sure that the video cable is not damaged.  
Check the ends of the video cable for any pins that might be bent or pushed in.  
Color is not uniform  
Make sure that the monitor warms up for at least 30 minutes before making a final  
judgment about color uniformity or brightness.  
Press the AUTO/SELECT button to automatically adjust the display image to the  
ideal settings.  
Image is not sized or centered correctly  
Press the AUTO/SELECT button to automatically adjust the display image to the  
ideal settings.  
Use the position controls to adjust the image. For instructions on how to adjust the  
display image position, see “Adjusting monitor settings” on page 6.  
The monitor has pixels that are always dark or too  
bright  
This condition is normal and inherent in the TFT technology used in active-matrix LCD  
screens. Gateway’s inspection standards keep these to a minimum. If you feel these pixels  
are unacceptably numerous or dense on your display, contact Gateway Technical Support  
to identify whether a repair or replacement is justified based on the number of pixels  
affected.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Specifications are subject to change without notice or obligation.  
19-inch active-matrix TFT (Thin Film Transistor) LCD  
1280 × 1024  
Monitor  
Best screen resolution  
Display colors  
Power input  
Over 16 million colors  
AC 100-240 V 50/60 Hz 1.0 A  
Normal operation: 45 W  
Power consumption  
Active Off operation: 3 W  
16.25 × 8.78 × 17.13 inches  
(41.28 × 22.30 × 43.50 cm)  
Dimensions  
®
Meets EPA ENERGY STAR and VESA DPMS requirements  
Power management  
Certifications  
UL, cUL, EPA, and FCC Class B, NOM  
Many products for Gateway and its subsidiaries are custom engineered by our suppliers  
to Gateway specifications and may vary from similarly marketed products.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A  
Safety, Regulatory, and Legal  
Information  
Safety information  
Regulatory statements  
Notices  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important safety information  
Your Gateway system is designed and tested to meet the latest standards for safety of information technology  
equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the  
product and in the documentation are followed.  
Warning  
Always follow these instructions to help guard against personal injury  
and damage to your Gateway system.  
Setting up your system  
Read and follow all instructions marked on the product and in the documentation before you operate your  
system. Retain all safety and operating instructions for future use.  
Do not use this product near water or a heat source such as a radiator.  
Set up the system on a stable work surface.  
The product should only be operated from the type of power source indicated on the rating label.  
If your product has a voltage selector switch, make sure that the switch is in the proper position for your area.  
The voltage selector switch is set at the factory to the correct voltage.  
Openings in the monitor case are provided for ventilation. Do not block or cover these openings. Make sure  
you provide adequate space, at least 6 inches (15 cm), around the system for ventilation when you set up your  
work area. Never insert objects of any kind into the monitor ventilation openings.  
Some products are equipped with a three-wire power cord to make sure that the product is properly grounded  
when in use. The plug on this cord will only fit into a grounding-type outlet. This is a safety feature. If you are  
unable to insert the plug into an outlet, contact an electrician to install the appropriate outlet.  
If you use an extension cord with this system, make sure that the total ampere rating on the products plugged  
into the extension cord does not exceed the extension cord ampere rating.  
If your system is fitted with a TV Tuner, cable, or satellite receiver card, make sure that the antenna or cable  
system is electrically grounded to provide some protection against voltage surges and buildup of static charges.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care during use  
Do not walk on the power cord or allow anything to rest on it.  
Do not spill anything on the system. The best way to avoid spills is to avoid eating and drinking near your  
system.  
Do not expose the monitor to rain or use near water. If the monitor does get exposed to moisture, unplug it  
and allow it to dry for 24 hours. Call Gateway Technical Support for advice on whether the monitor is safe to  
turn back on.  
When the monitor is turned off, a small amount of electrical current still flows through the monitor. To avoid  
electrical shock, always unplug all power cables and modem cables from the wall outlets before cleaning the  
system.  
Unplug the system from the wall outlet and refer servicing to qualified personnel if:  
The power cord or plug is damaged.  
Liquid has been spilled into the system.  
The system does not operate properly when the operating instructions are followed.  
The system was dropped or the cabinet is damaged.  
The system performance changes.  
Warning  
To prevent electric shock, never remove the cover. No user  
serviceable parts inside. Refer servicing to qualified service  
personnel.  
Replacement parts and accessories  
Use only replacement parts and accessories recommended by Gateway.  
Warning  
Do not use Gateway products in areas classified as hazardous  
locations. Such areas include patient care areas of medical and  
dental facilities, oxygen-laden environments, or industrial facilities.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Regulatory compliance statements  
United States of America  
Federal Communications Commission (FCC) Unintentional emitter per FCC Part 15  
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15  
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio or television  
reception. However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause interference to radio and television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment to an outlet on a different circuit from that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help.  
Compliance Accessories: The accessories associated with this equipment are: shielded video cable. These  
accessories are required to be used in order to ensure compliance with FCC rules.  
FCC declaration of conformity  
Responsible party:  
Gateway, Inc.  
14350 Myford Road  
Irvine, CA 92606 USA  
This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Caution  
Changes or modifications not expressly approved by Gateway could  
void the FCC compliance and negate your authority to operate the  
product.  
California Proposition 65 Warning  
Warning  
This product contains chemicals, including lead, known to the State  
of California to cause cancer, birth defects or reproductive harm.  
Mercury Warning  
Warning  
Hg  
lamp(s) inside this product contain mercury and must be  
recycled or disposed of according to local, state, or federal laws.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Canada  
Industry Canada (IC) Unintentional emitter per ICES-003  
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set  
out in the radio interference regulations of Industry Canada.  
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux  
appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie  
Canada.  
EPA ENERGY STAR  
®
As an ENERGY STAR Partner, Gateway has determined that this product meets the ENERGY  
STAR guidelines for energy efficiency when used with a computer equipped with a Display Power  
Management System.  
ENERGY STAR  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notices  
Copyright © 2004 Gateway, Inc.  
All Rights Reserved  
14303 Gateway Place  
Poway, CA 92064 USA  
All Rights Reserved  
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any  
means or in any form, without prior consent in writing from Gateway.  
The information in this manual has been carefully checked and is believed to be accurate. However, changes are made  
periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or change products  
described in this publication at any time. Due to continuing system improvements, Gateway is not responsible for inaccurate  
information which may appear in this manual. For the latest product updates, consult the Gateway Web site at  
www.gateway.com. In no event will Gateway be liable for direct, indirect, special, exemplary, incidental, or consequential  
damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.  
In the interest of continued product development, Gateway reserves the right to make improvements in this manual and the  
products it describes at any time, without notices or obligation.  
Trademark Acknowledgments  
Gateway and the Black-and-White Spot Design are trademarks or registered trademarks of Gateway, Inc. in the U.S. and  
other countries. SpotShop, Spotshop.com, and Your:)Ware are trademarks of Gateway, Inc. Intel, Intel Inside logo, and  
Pentium are registered trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and Windows are  
trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned herein are used for  
identification purposes only, and may be the trademarks or registered trademarks of their respective companies.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAN LG FPD1950 USR GDE R0 07/04  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cooper Lighting Indoor Furnishings V90096B User Manual
Craftsman Dishwasher 5807471 User Manual
Crate Amplifiers Musical Instrument KXB100 User Manual
Crate Amplifiers Stereo Amplifier GX 1600 User Manual
Cub Cadet Lawn Mower 19HP Enforcer 44 21HP Enforcer 48 23HP Enforcer 54 User Manual
EarthQuake Chainsaw CS3814 User Manual
Electro Voice Portable Speaker ECS 12 2 User Manual
Euro Pro Iron G6118 User Manual
Frigidaire Clothes Dryer FFSG5115PA User Manual
Frigidaire Oven 318205312 User Manual