GE Ventilation Hood ZVB36BH User Manual

ZVB36SH/BH/WH – GE Monogram 36" Telescopic Downdraft Vents  
Dimensions and Specifications (in inches)  
Separate Raise/Lower Switch  
2"  
8-1/2"  
Lift  
36  
7-1/2"  
34  
2-1/4"  
All 36” models are equipped with a separate raise/lower switch. The switch must be installed  
in a separate location outside of the vent and cooktop cutout.  
3-1/8"  
6-1/4"  
3-3/4"  
27"  
Countertop Requirements  
Before you begin you must:  
Countertops must have a deep flat surface to  
accommodate the cooktop and the vent.  
Countertops with a rolled edge and backsplash  
may not provide the flat surface area required.  
1. Review countertop dimension illustrations  
to be sure you will have enough flat  
countertop surface depth.  
10-1/2"  
3-3/8"  
7-1/8"  
2. Check to be sure that the total countertop  
depth required (including minimum cutout  
to front edge depth) allows enough space  
for a backsplash.  
Base Cabinet Requirements  
The base cabinet must be deep enough to  
accommodate the minimum clearance to the  
front edge of the countertop, the cooktop  
burner box and the vent.  
3. Review the cabinet illustration. Check to  
be sure that the interior cabinet depth will  
house the cooktop burner box, the vent and  
the cutout clearance from the front.  
Downdraft Vent and Cooktop Cutout  
The installation of these downdraft vents  
with any Monogram cooktop requires careful  
consideration. For accurate planning,  
review the individual dimension drawings  
for the combined vent and Monogram  
cooktop installation.  
4. When countertop and cabinet depth present  
a problem, review Creative Solutions.  
5. Carefully review the installation instructions  
packed with product or available online at  
With careful planning you can achieve a  
custom look with minimal adjustments.  
For answers to your Monogram,® GE Profileor  
Listed by  
Underwriters  
Laboratories  
GE® appliance questions, visit our website at  
GEAppliances.com or call GE Answer Center®  
service, 800.626.2000.  
R
Specification Created 10/03  
130656  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ZVB36SH/BH/WH – GE Monogram 36" Telescopic Downdraft Vents  
Venting Options  
The downdraft vent is shipped with the  
discharge outlet pointing straight down  
and can be changed to a left- or right-side  
discharge. For even more flexibility, the entire  
blower and mounting plate can be adjusted  
3-1/2" to the left or right sides.  
Discharge Down  
(As Supplied)  
Discharge Left  
Discharge Right  
Electrical and Gas Locations  
Plan the placement of the electrical outlet  
and gas (if used) carefully. Gas or electrical  
outlets cannot be located on the back wall of  
the cabinet because they may interfere with  
the downdraft plenum.  
Do Not Locate Gas or Electrical  
Connections Within Shaded Area  
• Install a standard electrical outlet within  
reach of the vent’s two-foot-long power  
cord. Locate the outlet inside the cabinet  
on the right side wall.  
• If the vent is installed in combination with a  
Monogram® gas cooktop, it may operate  
from the same 120V standard duplex outlet.  
• If the vent is installed in combination with a  
Monogram electric cooktop, the vent must  
operate from a separate 120V outlet.  
29-1/2"  
Electrical  
Outlet  
12" Above  
Cabinet Floor  
34" for 36" Models  
28-1/2" for 30" Models  
Listed by  
Underwriters  
Laboratories  
R
For answers to your Monogram,® GE Profileor  
GE® appliance questions, visit our website at  
GEAppliances.com or call GE Answer Center®  
service, 800.626.2000.  
Specification Created 10/03  
130656  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ZVB36SH/BH/WH – GE Monogram 36" Telescopic Downdraft Vents  
Features and Benefits  
• 36" Telescopic downdraft system  
• 500 CFM performance  
• Remote-mounted control  
• Variable-speed fan with slide control  
• Raises to 8-1/2" over cooktop surface  
• Retracts when not in use  
• Removable grease filters  
• 3-1/4" x 10" rectangular duct  
• Optional remote blower capabilities  
• Stainless steel vent body  
• Minimum 6" round duct capabilities  
• Model ZVB36SHSS – Stainless steel (shown)  
• Model ZVB36WHWW – White on white  
• Model ZVB36BHBB – Black on black  
Specification Created 10/03  
130656  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower 38820 User Manual
Crest Audio DJ Equipment X 18R User Manual
Cuisinart Hot Beverage Maker KUA 17C User Manual
Fellowes Paper Shredder 190 User Manual
Fisher Price Baby Toy 73437 User Manual
Fisher Price Motorcycle T6197 User Manual
Fisher Price Motorized Toy Car T0787 User Manual
Gaggenau SONAR CE 490 612 User Manual
Garland Oven HEEE 24Cl User Manual
GE Oven 164D2966P030 User Manual