Foster Ventilation Hood Domino S4000 User Manual

USER'S MANUAL FOR SCUTION HOOD  
Domino S4000 Ghost, cod. 2451 000  
Foster spa  
via M.S. Ottone, 18/20  
42041 Brescello (RE) - Italy  
tel. +39.0522.687425 - tel. Servizio Assistenza +39.0522.684450  
fax +39.0522.686019 - fax Servizio Ricambi +39.0522.962166  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IT  
Il simbolo  
sul prodotto o sulla confezione indica che il prodotto non deve essere  
considerato come un normale rifiuto domestico, ma deve essere portato nel punto di raccol-  
ta appropriato per il riciclaggio di apparecchiature elettriche ed elettroniche. Provvedendo a  
smaltire questo prodotto in modo appropriato, si contribuisce a evitare potenziali conseguenze  
negative per l’ambiente e per la salute, che potrebbero derivare da uno smaltimento inadegua-  
to del prodotto. Per informazioni più dettagliate sul riciclaggio di questo prodotto, contattare  
l’ufficio comunale, il servizio locale di smaltimento rifiuti o il negozio in cui è stato acquistato il  
prodotto. Questo elettrodomestico è marcato conformemente alla Direttiva Europea 2002/96/  
CE sui rifiuti da apparecchiature elettriche ed elettroniche (WEEE).  
EN  
The symbol  
on the product or on its packaging indicates that this product may not  
be treated as household waste. Instead it shall be handed over to the applicable collection point  
for the recycling of electrical and electronic equipment. By ensuring this product is disposed of  
correctly, you will help prevent potential negative consequences for the environment and hu-  
man health, which could otherwise be caused by inappropriate waste handling of this product.  
For more detailed information about recycling of this product, please contact your local city of-  
fice, your household waste disposal service or the shop where you purchased the product. This  
appliance is marked according to the European directive 2002/96/EC on waste electrical and  
electronic equipment (WEEE).  
FR  
Le symbole  
sur le produit ou son emballage indique que ce produit ne peut être traité  
comme déchet ménager. Il doit plutôt être remis au point de ramassage concerné, se chargeant  
du recyclage du matériel électrique et électronique. En vous assurant que ce produit est éliminé  
correctement, vous favorisez la prévention des conséquences négatives pour l’environnement et  
la santé humaine qui, sinon, seraient le résultat d’un traitement inapproprié des déchets de ce  
produit. Pour obtenir plus de détails sur le recyclage de ce produit, veuillez prendre contact avec  
le bureau municipal de votre région, votre service d’élimination des déchets ménagers ou le ma-  
gasin où vous avez acheté le produit. Cet appareil est commercialisé en accord avec la directive  
européenne 2002/96/CE sur les dèchets del équipments èlectriques et èlctroniques (WEEE).  
ES  
El símbolo  
en el producto o en su embalaje indica que este producto no se puede  
tratar como desperdicios normales del hogar. Este producto se debe entregar al punto de re-  
colección de equipos eléctricos y electrónicos para reciclaje. Al asegurarse de que este produc-  
to se deseche correctamente, usted ayudará a evitar posibles consecuencias negativas para el  
ambiente y la salud pública, lo cual podría ocurrir si este producto no se manipula de forma  
adecuada. Para obtener información más detallada sobre el reciclaje de este producto, póngase  
en contacto con la administración de su ciudad, con su servicio de desechos del hogar o con la  
tienda donde compró el producto. Este electrodomestico està marcado conforme a la directiva  
Europea 2000/96/CE sobre los residuos de aparatos elèctricos y electrònicos (WEEE).  
DE  
Das Symbol  
auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses  
Produkt nicht als normaler Haushaltsabfall zu behandeln ist, sondern an einem Sammelpunkt  
für das Recycling von elektrischen und elektronischen Geräten abgegeben werden muss. Durch  
Ihren Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie die Umwelt und die Ge-  
sundheit Ihrer Mitmenschen. Umwelt und Gesundheit werden durch falsches Entsorgen gefähr-  
det. Weitere Informationen über das Recycling dieses Produkts erhalten Sie von Ihrem Rathaus,  
Ihrer Müllabfuhr oder dem Geschäft, in dem Sie das Produkt gekauft haben. Dieses Elektro-  
haushaltsgerät ist entsprechend der EU-Richtlinie 2002/96/CE Über Elektro- und Elektronik  
– Altgeräte (WEEE).  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
CONTENTS  
1/ TO THE ATTENTION OF THE USER  
- Safety instructions  
- Description of the applianc  
16  
17  
2 / INSTALLING THE HOOD  
- Mounting the hood  
- Removal of the filter cartridge  
- Mounting the filter cartridge  
- Electrical hook-up of the hood  
18  
19  
19  
20  
3 / HOW THE HOOD WORKS  
4 / CLEANING THE HOOD  
5 / OPERATIONAL ANOMALIES  
6 / AFTER SALES SERVICE  
21  
23  
24  
24  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
1/ TO THE ATTENTION OF THE USER  
Important: keep these instructions for use with the appliance. If the appliance should be  
sold or passed on to others, make sure that the instructions are passed on with it. We thank  
you for taking note of these suggestions before installing and using the appliance. They have  
been written for your personal safety and the safety of others.  
- SAFTEY INSTRUCTIONS  
These hoods have been designed for personal use in the home. The appliance must be used  
by adults. Make sure that children do not come into contact with the appliance and that they  
do not use it to play with. Make sure that children do not operate the controls.  
-
When the appliance is delivered, check the overall appearance of the packaging.  
Any remarks should be written on the delivery coupon, of which you keep a copy.  
Your appliance is designed for normal domestic use.  
It is not designed for commercial or industrial use, or for purposes other than those for which it  
was designed.  
-
-
-
Any consequences of or damage from incorrect installation or incorrect use of the appliance will  
not be covered by the manufacturer’s guarantee.  
Repairs must be performed only by an authorised specialist.  
Always disconnect the hood before carrying out cleaning or maintenance operations.  
Adequately ventilate the area in case the hood is activated simultaneously with other appliances  
powered from non-electrical sources so that the hood does not ventilate these combustion  
fumes.  
-
-
It is prohibited to cook food over open flames or operate gas hobs without pots or pans on them  
under the hood itself (the flames sucked into the hood might damage the appliance).  
Deep frying under the appliance must be done under constant supervision as hot oils and fats  
may ignite.  
Respect the guidelines for cleaning and replacement of the filters. Accumulated deposits of  
grease are a fire hazard.  
-
-
This appliance must not be used over cook tops powered by wood or coal or in any case, over  
cook tops with power levels that could damage the appliance.  
Never use steam or high-pressure devices for cleaning your hood (regulations regarding electri-  
cal safety).  
Never use the hood without the grease filters  
NOTE: The minimum distance between the open down draft and the surface above it needs to be  
400 mm  
NOTE: When moving the down draft, never place hands inside the operating radius of the pull-out  
carriage  
Constantly seeking to improve our products, we reserve the right to modify their technical, func-  
tional, or aesthetic characteristics as they evolve.  
In the case of the version with external motor, for normal downdraft operation, it is necessary  
to use an extraction unit (external motor) made by the same manufacturer.  
The air collected must not be conveyed into a flue used for smoke or fumes from appliances  
powered by anything other than electricity (central heating systems, etc.). As far as concerns  
discharging air from the flue, respect the guidelines of the competent authorities.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
1/ TO THE ATTENTION OF THE USER  
- DESCRIPTION OF THE APPLIANCE  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
2/ INSTALLING THE HOOD  
1) Before installing the appliance, make sure that none of the parts is damaged in any way. In case of  
damaged parts, contact your retailer and do not proceed with installation.  
Read all of the following instructions with care before installing the appliance.  
- Use an air outlet pipe of the shortest possible length.  
- Limit the number of pipe bends.  
- Use a material approved by standards and regulations.  
- Avoid any sudden changes in pipe section (recommended constant diameter: 150 mm or equal  
surface area).  
Before the installation of the Downdraft, please remove the security piece you can see in the picture  
(Fig. 1-2-3-4).  
The manufacturer will not be answerable for any capacity or noise problems caused by failure to com-  
ply with the above instructions and the warranty will be rendered null and void.  
2) Before making the opening, check that there are no structural or other parts inside the cabinet, where  
the appliance is to be placed, which could hinder a proper installation. Check that the dimensions of  
the Downdraft and the ones of the cooktop are compatible with the cabinet so that the installation can  
be carried out properly.  
3) Make a rectangular opening measuring 490 x 104 mm in the area chosen for the cook top.  
For models with motor already fitted, remove the screws and the extraction unit to fit the downdraft in  
the relevant hole. At this point, insert a seal (silicone) in the bottom section of the frame support (Fig.  
18) and place in the relevant hole (Fig. 19-20), then proceed to insert the downdraft into the unit.  
4) Put the Downdraft in the opening, inserting it from above as shown in Fig. 12.  
5) The upper edge of the Downdraft must fit perfectly the cooktop.  
6) Fix the Downdraft inside the cabinet. According to the dimensions of the cabinet and of the air outlet  
duct, use the provided fixing brackets.  
Attention: do not make any additional openings on the appliance in order to avoid to damage the  
internal sliding and electrical components.  
7) After completing the installation and connecting the appliance to the mains electricity, lift the down-  
draft and remove the door block (Fig. 5-6-7). Then open the door (Fig. 8 - 9), remove the PVC grease  
filter shield (Fig. 10), then place the filters as illustrated in Fig. 11  
8) In the version of the Downdraft equipped with motor, install the motor group adjusting the air evacu-  
ation direction as required, either downwards or upwards. After installing the motor, connect the air  
ducts (Fig. 13).The motor can be fitted either on the front or back side of the downdraft..  
9) For versions with outside motor, place the suction unit (outside motor) in a suitable area and fit the  
exhaust air flue as illustrated in Fig. 13. Proceed to fit the air outlet ducts between the outside mo-  
tor and the down draft. Select an air outlet from the five possibilities (Fig. 21) and fit the connection  
provided.  
10) Put the metallic box containing the electronic components in a place easy to be reached if a technical  
assistance is needed Fig. 14). Connect the electrical connectors of the box to the Downdraft (Fig. 14).  
11) For outside motors, connect the motor unit cable to the relevant connector on the electrical compo-  
nents box.  
12) Power the appliance.  
Downdraft calibration  
After the downdraft has been installed, the aspiration panel must be calibrated. This operation is neces-  
sary to regulate the power exstraction of the aspiration panel. Connect the product to the power line,  
making sure that it is conformed to the supply voltage indicated on the technical data tag. Pushing  
the ON/1 button (Fig. 22B for SDD3 and 15H for SDD3 TC) the aspiration panel rises. After it has reached  
a height of 180mm from the cooketop, press OFF, to stop the extraction then the Timer and after 2 sec.  
the OFF button.  
The downdraft will carry out the calibration of its aspiration panel rising and retracting for some centim-  
eters. During this phase, the buttons on the pushbutton control panel blink. At the end of the calibration,  
the aspiration panel get back to the previous position and the button end to blink. Wait until the aspiration  
panel stops moving before re-activating the extraction.  
After the self-calibration stage, close the filter unit completely using the OFF button.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UTILISATION  
This product is intended to extract fumes, fats, and steam from cooking. It has been designed and made for use  
either in the suction or filter versions.  
VERSION EVACUATION exterieure  
The hood is equipped with an air outlet to convey smoke outwards (the flue pipe and fixing flange are not sup-  
plied).  
Check valve blockage  
Warning: Before connecting the air exhaust hose, make sure that the check valves are free to  
turn over freely.  
For hoods with outside air exhaust, fit a check valve to prevent wind and returning air from  
entering.  
Recirculation model  
If it is not possible to fit an exhaust flue for smoke and fumes to be discharged outside, it is  
possible to use the recirculation model. Carbon filters are required for this type of hood. The  
recycled air is discharged back into the kitchen via a pipe that conveys it out through one side  
of the unit (Fig. 14 bis).  
Installation must conform to the regulations in force regarding the ventilation of en-  
closed environments. In particular, discharged air must not be channelled into a conduit  
used for exhaust discharge or discharge from devices that operate with gas or other com-  
bustible materials. The use of unused conduits is not permissible without the approval of  
a qualified technician.  
The product can be installed at a distance of less than 65 cm from the cook top, according  
to the standard EN60335-2-31:1997.  
- REMOVAL OF THE FILTER ALUMINIUM CARTRIDGE  
- MOUNTING THE CARBON FILTER  
The removal and fitting of the grease and carbon filters need to be carried out with the down-  
draft in the open position. To open the downdraft, push the ON/1 key. Then remove the front  
panel, pushing the upper part of each side at the same time. The panel will rotate forwards to  
make it possible to access the grease filters (Fig. 16). Remove the grease filters to access the  
carbon filters (Fig. 17). The carbon filters should be changed according to the frequency of  
downdraft use and in any case, once every 6 months.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- ELECTRIAL HOOK UP OF THE HOOD  
WARNING: Place the metal box containing the electronic components at a distance of no  
less than 65 cm from gas-operated cook tops or in any case, 65 cm from the extraction  
point of the hood.  
RECOMMENDATION: We recommend installing the metal box containing the electronic  
components at least 10 cm above floor level and at a suitable distance from all heat  
sources (e.g. oven sides or cook top).  
This appliance is fitted with an H05 VVF 3 conductor, 0.75 mm2 (neutral, phase, and  
ground) power cable. This can be hooked up to a 220 – 240 V mono-phase electrical net-  
work by way of a CEI 60083 regulation power socket that must remain accessible after  
installation, in conformity to installation regulations.  
We decline all responsibility in case of accident caused by a lack of ground connection  
or incorrect ground connection. The fuse used must be 10 or 16 A. If the power cable is  
damaged, call the after-sales service to avoid any risk.  
Attention  
If the hood presents some form of anomaly, unplug the appliance or remove the fuse corre-  
sponding to the appliance’s power line.  
If the appliance has no plug or if the plug is not easily accessible, then a device needs to be fit-  
ted to cut it off from the mains electricity; this device must have an opening distance between  
contacts on all poles of at least 3 mm.  
ELECTRIAL HOOK UP  
This appliance conforms to the European Directives 2006/95/EC (Low Voltage Directive)  
and 2004/108/EC (Electromagnetic Compatibility).  
When you install the appliance and carry out maintenance, it must be unplugged from the  
power source or the fuses must be disengaged or removed. Electrical hook up must be carried  
out before the appliance is installed in the cabinet.  
Check that:  
- the power source is sufficient,  
- power cords are in good condition,  
- The diameter of the cables conforms to installation regulations.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
3/ HOW THE HOOD WORKS  
Model SDD3 STANDARD VERSION (Fig. 22)  
A: Extraction panel down/OFF switch  
This serves to close the extraction panel either completely or in intermediate positions above  
180 mm from the cook top. When the extraction panel is being closed, it will remain in opera-  
tion until it reaches 180 mm above the cook top. Below this height, the extraction function will  
switch off automatically.  
B: Extraction panel up ON/Speed 1  
This serves to bring the extraction panel up to a maximum height of 300 mm and to auto-  
matically set the first extraction speed when the panel reaches a height of 180 mm. Pressing  
the button when this height is reached makes it possible to place the extraction panel in the  
required intermediate positions, up to a maximum of 300 mm, while leaving the extraction  
speed of the motor unchanged.  
C: Speed 2 switch  
D: Speed 3 switch  
E: Speed 4 switch  
These serve to set the respective suction speeds after the extraction panel has reached 180 mm  
above the cook top and to set the height of the extraction panel to a maximum of 300 mm by  
pressing the same button.  
F: 10-minute timer  
This is used to switch off the extraction system automatically as well as to close the extraction  
panel 10 minutes after it has been enabled.  
Model SDD3 TOUCH CONTROL VERSION (Fig. 15)  
OFF switch: (Fig. 15) It is used to close the aspiration panel completely or to position it at inter-  
mediate heights at least mm 180 above the cooktop. While closing the aspiration panel keeps  
on working at the speed set up to the height of mm 180 from the cooktop. Below this height  
the aspiration function is automatically cut out.  
On switch/+: (Fig. 15) It is used to extract the aspiration panel up to the maximum height of  
mm. 300 and to set automatically the first aspiration speed when reaching the height of mm  
180 from the cooktop.  
When pressing the button again after reaching this height, the aspiration motor speed can be  
encreased.  
If the aspiration panel is positioned at an intermediate height between mm 180 and mm 300, the  
aspiration panel can start raising again by pressing first the OFF switch and then the On/+.  
Switch.  
Leds: (Fig. 15) The different speed levels are indicated by blue leds. (1. Speed level corresponds  
to the led down on the left).  
MINUS SWITCH: (Dis. 15) it is working only if the position reached by the aspiration panel  
is higher than mm 180 from the cooktop. It is used to decrease the aspiration motor  
speed.  
TIMER SWITCH: (Fig. 15) : it is used to stop automatically the aspiration system and to close  
automatically the aspiration panel ten minutes it has been set.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other functions:  
- After 30 hours of appliance operation, the pushbutton panel indicates saturation of the  
grease filters by the buttons flashing. To reset, press the timer button.  
- After 4 hours of continuous operation from the last setting, the appliance turns off and  
closes automatically.  
- When the front panel is removed for cleaning and maintenance operations, all the electronic  
aspiration and movement functions are locked.  
- Anti pinching safety device: if anything is obstructing the closure operation of the down-  
draft, the operation will stop and the downdraft will move up again.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
4/ CLEANING THE HOOD  
Careful maintenance helps guarantee proper operation and good results from an appliance  
over time.  
The hood must be unplugged from the electrical power source, both by unplugging  
the appliance from the socket as well as de-activating the breaker, before removing the  
metal filters. After cleaning, you must replace the metal filters as outlined in the instruc-  
tions.  
ACCESSORY PRODUCTS TO  
USE  
MAINTENANCE  
HOW TO PROCEED?  
To clean the external sur-  
faces of the hood and the  
light housing screen use  
only commercially available  
household detergents dilut-  
ed in water. Then rinse with  
clean water and dry with a  
soft cloth.  
Do not use metallic scrub-  
bers, abrasive products, or  
hard brushes.  
External surfaces and  
accessories  
The grease filters can be  
washed by hand or in the  
dishwasher. These filters  
need to be cleaned on a reg-  
ular basis because otherwise  
they may present a fire risk.  
Refit the grease filters and  
front panel, making sure that  
the panel is properly fitted at  
the sides so that it does not  
cause the downdraft to stop  
operating.  
After 30 hours’ operation,  
the button pad will sig-  
nal that the grease filter is  
saturated by flashing the 4  
speed LEDs. Press the timer  
Grease filter  
button to reset  
.
In the recirculation mode,  
you must substitute the ac-  
tive carbon filter periodically.  
To remove the carbon filter  
it is necessary first of all to  
remove the grease filter and  
then to pull the plastic key of  
the panel itself to remove it  
from its seating.  
Active carbon filter  
Follow these steps in reverse  
order to insert the active car-  
bon filter.  
Replace the used carbon fil-  
ter on an average of every six  
months.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
5/ OPERATIONAL ANOMALIES  
SYMPTOM  
SOLUTION  
Check that:  
• there is not a power outage.  
• a specific speed has actually been selected.  
The hood does not  
work...  
Check that:  
• the motor speed selected is sufficient for the quantity of fumes  
steam present.  
• the kitchen is ventilated well enough to allow for air intake.  
• the carbon filter is not worn (hood n recirculation mode).  
The hood has low  
output...  
The hood stops in Check that:  
the middle of ope- • there is not a power outage.  
ration  
• the omnipolar device has not tripped.  
EN  
6/ AFTER SALES SERVICE  
Any maintenance on your equipment should be undertaken by:  
- either your dealer,  
- or another qualified mechanic who is an authorized agent for the brand appliances.  
When making an appointment, state the full reference of your equipment (model, type and  
equipment). This information appears on the manufacturer’s nameplate attached to your  
equipment.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
3
4
6
5
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
8
9
10  
11  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
13  
14  
14 bis  
15  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
17  
18  
19  
21  
20  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F
C
D
E
A
B
22  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Continental Electric Juicer CE22671 User Manual
Craftsman Cordless Drill 973111471 User Manual
Craftsman Cordless Drill 973274870 User Manual
Creda Oven Single Oven User Manual
Digital Spectrum Digital Photo Frame NV 800 User Manual
Earlex Ventilation Hood VAP75 User Manual
Electro Voice Stereo Amplifier PA2450 User Manual
Fundex Games Games Double Nine Dominoes User Manual
Gitzo Camcorder Accessories G1220 User Manual
Global Machinery Company Edger EDG3 User Manual