Discovery
™
Airport
Model Number 77831
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
Requires four “AA” (LR6) alkaline batteries (not included).
Disc
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts
Bridge
Bridge Base
Terminal
Straight Track
Ramp with
Fuel Pump
Terminal Base
Umbrella
Ramp
Windsock
Luggage
Binocular
Viewer
Radar Dish
Helicopter
Helicopter Lift
Luggage Trailer
Luggage Car
Taxi
Airplane
Parts not shown: 3 Figures.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Installation
Terminal
Base
Battery
Compartment
Door
Battery Tips:
• Do not mix old and new batteries.
• Do not mix different types of batter-
ies: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Remove the batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Battery leakage and corrosion can
damage this toy. Dispose of batter-
ies safely.
1.5V x 4
“AA” (LR6)
Shown Actual Size
• Do not dispose of batteries in a fire.
The batteries may explode or leak.
• Locate the battery compartment
door on the bottom of the
airport base.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert four, "AA" (LR6) alkaline
batteries, as indicated inside the
battery compartment.
• Never short circuit the battery
terminals.
• Non-rechargeable batteries are not
to be recharged.
• Only batteries of the same or equiv-
alent type as recommended in the
"Battery Replacement" instructions
are to be used.
• If removable rechargeable batteries
are used, they are only to be
• Replace the battery compart-
ment door and tighten the screw
with a Phillips screwdriver.
Do not over-tighten.
charged under adult supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• When sounds or lights from
this toy become faint or stop, it’s
time for an adult to change the
batteries!
Hint: We recommend using alkaline
batteries for longer battery life.
• If you use a battery charger, it
should be examined regularly for
damage to the cord, plug, enclosure
and other parts. Do not use a dam-
aged battery charger until it has
been properly repaired.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
1
Terminal
Terminal Base
• Position the terminal base on a flat surface. Insert and "snap" the
tabs on the bottom of the terminal into the slots in the terminal
base as shown. Press firmly on the building to make sure all five
tabs have snapped in place.
• Pull up on the terminal to be sure it is secure.
Ramp with
fuel pump
2
Ramp
Bridge Base
• Place the bridge base on a flat surface. Insert and "snap" the tabs
on the ramp into the slots in the bridge base as shown.
• Insert and "snap" the tabs on the ramp with fuel pump into the
slots in the bridge base as shown.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Bridge
3
• Insert and "snap" the tabs on the ends of the bridge into the
slots in the ramps, as shown.
Ramp Assembly
4
Straight Track
• Insert and "snap" the tabs on the end of each ramp into the slots
in the straight track as shown.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2002 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China
77831a-0920
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Radar Dish
Binocular
Viewer
5
Windsock
Umbrella
Table
• Insert and "snap" the peg on the bottom of the radar dish into
one of the two large holes on the roof of the terminal.
• Insert and "snap" the peg on the bottom of the binocular viewer
into the other large hole on the roof of the terminal.
• The windsock can be inserted and removed from any of the
smaller holes on the roof of the terminal.
• The umbrella can be inserted and removed from the hole in the
table on the terminal base.
Terminal
Track
6
Terminal Base
Groove
• To attach the terminal to the track, place the ridge on the bottom of
terminal base into the groove in the track.
Hint: Lift the terminal base to separate from the track for easier storage.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Application
Proper label application will help to keep the labels looking their best!
• Wash your hands before applying the labels.
• Make sure the areas where the labels will be applied are clean and dry.
Wipe this product with a clean, soft, dry cloth to remove any dust or oils.
• For best results, do not attempt to apply a label more than once.
• Apply the labels as shown in the illustrations.
19
17
17
8
15
18
14
9
13
2
18
17
18
4
17
3
18
Terminal Back View
6
5
7
12
1
11
10
16
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Airport Fun with Lights and Sound Effects!
X Button
Indicator
Light
Power
Switch
• Locate the power switch on the bottom of the toy.
• Slide the switch to the on position. The lights flash and you’ll
hear a musical "fanfare". The indicator light shows the toy is ready
to recognize the vehicles when rolled.
• If your child does not actively play with this toy for a few minutes,
the toy will play the same fanfare and go to sleep. The indicator
light goes out. Sound effects and lights will not work.
• To "wake up" the toy, press the "X" button on the top of the
airport building.
• When your child is finished playing with the toy, slide the on/off
switch to the off
position.
Luggage Storage
• Place luggage in the groove on the back bumper of the taxi or under
the jet plane.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Roll ‘n Recognize
Roll any vehicle within 3 feet of the airport. The airport recognizes the
vehicle and responds with a sound effect and lights.
Turn the baggage
carousel to hear
Rotate the
a tune.
helicopter
propeller
for lights
and sound
effects.
Hint: Teach your child
how to roll the vehicles at
Raise and lower the
a consistent speed and in
toll gate for flashing
a straight line to activate
lights and phrases.
the sound effects.
If Vehicle Sound Effects Are Not Playing
Check to see if:
• Vehicles are being rolled or helicopter propeller is being rotated
outside the zone of about three feet from the airport terminal.
• Vehicle is not being rolled at least six inches.
• Your child is playing with the toy in a noisy room with clicking noises
in the background. This toy recognizes the clicking sounds made by
each vehicle. If there is another clicking or tapping noise in the back-
ground, the toy will not be able to identify the vehicle because of the
interference. Make sure your child plays with this toy in a quiet room.
• Your child has rolled more than one vehicle at a time.
• The vehicle is not being rolled smoothly.
• The vehicle is being rolled back and forth (reversing direction).
• Vehicle is not being pressed when rolled, to make it click.
• Your child is rolling a vehicle while the toy is playing a sound effect.
Wait until the sound effect is finished.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Care
• Wipe the toy with a clean cloth dampened with a mild soap and
water solution.
• Do not immerse the toy.
FCC Note (United States Only)
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS,
8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers
using TTY/TDD equipment, please call 1-800-382-7470. Or, write to:
Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora,
New York 14052.
For other countries, outside the United States:
Canada: call 1-800-567-7724, or write to: Mattel Canada Inc, 6155 Freemont Blvd.,Mississauga, Ontario L5R 3W2.
Great Britain: telephone 01628 500303. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|