Fellowes Paper Shredder PS25 User Manual

®
Powershred Personal Series  
Operating Instructions  
Mode d’emploi  
A
B
C
D
E
F
Instrucciones de funcionamiento  
Bedienungsanleitung  
Bedieningsinstructies  
Istruzioni sul funzionamento  
Models:  
PS25  
PS50  
PS25  
PS30  
PS50 Plus  
PS55  
PS30 Plus  
PS40  
PS55CC  
PS45  
DM-3  
PS35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
PS25  
PS25 Plus  
PS30  
PS30 Plus  
PS35/ PS40  
Follow instructions for sheet capacity. (See Table A)  
Position paper over entry.  
Depress power switch to the ON (I) position to start cutting system.  
Return the power switch to the OFF (O) position to stop cutting system.  
PS50  
Follow instructions for sheet capacity. (See Table A)  
PS50 Plus  
PS55*  
Depress the power switch to the ON (I) position to activate the standby mode.  
*Green Ready light will come on if model has indicator lights.  
PS55CC*  
DM-3*/ PS45*  
Shredder automatically starts when paper is placed in the entry and stops when  
finished shredding.  
Cleaning  
A
B
C
D
E
F
Unplug the unit from the wall before cleaning.  
All Models  
Housing can be cleaned with a cloth, dampened with a mild soap and water solution.  
Sheet Capacity and Usage  
Do not exceed recommended sheet capacity for your model.  
Folding paper to fit the entry increases the thickness and recommended capacity may be exceeded.  
Clips and staples increase the thickness and may decrease sheet capacity.  
US 20# Paper  
64 GSM  
80 GSM  
80 GSM  
Model:  
Sheets per Pass  
Sheets per Pass Sheets per Pass Sheets per Pass  
120V/ 50Hz  
100V/ 50Hz  
230V/ 50Hz  
240V/ 50Hz  
PS55CC  
3
5
N/ A  
7
N/ A  
5
N/ A  
5
PS25  
PS25 Plus  
PS 30  
5
7
5
5
5
7
5
5
PS30 Plus  
PS35 & PS40  
PS50  
5
7
5
5
5
7
5
5
5
7
5
5
PS50 Plus  
PS55 (non-100/ 120V)  
PS55 (100/ 120V)  
DM-3/ PS45  
5
7
5
5
N/ A  
7
N/ A  
7
5
5
N/ A  
N/ A  
N/ A  
N/ A  
7
7
Different paper weights and electrical currents will affect capacity.  
3
TABLE A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety & Maintenance of PS55CC  
The PS55CC cross cut shredder creates small particles that, if allowed to accumulate, cause the shredder to jam.  
Follow these simple precautions to significantly reduce the likelihood that particles will accumulate and to keep your  
cross cut shredder operating at peak efficiency:  
Do not allow the basket to overfill. The power of this shredder will compress paper particles into the basket even  
when it is full. The life of your shredder may be reduced if the cutting system continues to operate with particles  
packed around it.  
Reverse the shredder often. Reversing helps the shredder flush out small cut particles. Empty basket if it is full  
before reversing.  
Oil the cutters:  
When...  
Every second or third time you empty the basket;  
If the shredder’s cutting capacity is diminished;  
If the cutting cylinders stop with a squeak or a rubbing sound after power is removed.  
How...  
Use Powershred Lubricant #35250 or a suitable alternative with an extension nozzle. Alternatives can be 3 in 1 or  
Sewing Machine Oil. Oil must be non-flammable material and a non-degreaser! Do not use a can spray. Accelerants  
are combustible. See order form in this manual.  
A
B
C
D
E
F
Squeeze the lubricant across the full width of the cutters and then turn the machine on and run the cutting system  
forward for a few seconds. (Since cross-cut machines have auto start, it will be necessary to block the photo eye with  
a piece of paper in order to run the cutting system forward).  
Then, depress the reverse button and run the cutting system for a few seconds. Repeat the procedure.  
Safety of PS55CC  
Do not operate PS55CC without the basket it was shipped with.  
Do not use without the safety flap. Injury may result.  
Do not attempt to defeat the safety interlock switch.  
Paper Jams  
1. Immediately return power switch to OFF (O) position.  
2. Depress power switch to the REVERSE (R) position until the jammed paper has been fully removed from the cutter.  
3. DO NOT PULL ON PAPER. Damage to the drive system could occur.  
4. If the REVERSE (R) function will not operate when pressed, the internal overload protection device has been  
activated. Release the power switch from the REVERSE (R) POSITION, wait 15 seconds and repeat.  
5. If the machine jams in reverse, unplug the unit and cut all excess paper off the top and bottom of the machine  
before repeating the jam-clearing procedure.  
6. Shred smaller quantities. See sheet capacity (Table A).  
Model  
When operating this product, you must use the enclosed power supply.  
Failure to do so will void the manufacturer’s warranty and may damage the unit.  
North America  
Europe  
Australia  
Japan  
UK  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Red light = capacity exceeded.  
1. Empty the basket if it is full.  
DM-3  
PS45  
PS55  
2. Reverse out the paper being fed into the shredder.  
3. Divide the paper being shred into smaller packets that are within the stated  
capacity of the shredder.  
4. If the jam persists, slowly move the shredder’s power switch back and forth  
between FORWARD (I) and REVERSE ( R ), always stopping for a moment in the  
OFF position (O). Rapid switching can create force that will damage your  
shredder.  
PS55CC  
5. See “Maintenance of PS55CC Cross Cut Shredder.”  
PS55CC only  
Parts Identification  
Wastebaskets not included with some models.  
1. Power Jack or Power Cord  
2. Power Switch  
4. Paper Entry  
5. Wastebasket  
6. Indicator Lights (on select models)  
1
3. Housing  
3
A
B
C
D
E
F
¤
2
4
1
6
2
4
3
5
PS25, PS30, PS50  
5
PS35, PS40, PS45,  
PS55, PS55CC, DM-3  
Overload Protection  
Important Note  
This shredder is protected by a built-in thermal overload  
device that serves to protect the motor from overuse.  
When continuous shredding is conducted for an extended  
period of time, the shredder will automatically turn itself  
off to cool down. When shredding is automatically  
stopped, allow the unit to stand for about 30 minutes  
before using it again.  
This paper shredder is not intended to shred high volumes  
of paper. Please refer to the specifications for the  
recommended daily usage and sheet capacity of this  
shredder. Please note that if the paper is wider than the  
entry, and you fold it to fit, the paper thickness increases  
and the recommended capacity may be exceeded.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shred Size:  
Specifications:  
Entry width =  
Power Source:  
9” (230 mm)  
PS55CC  
5/ 32” x 4/ 5” (3.9mm x 20mm)  
120V-60Hz (N. America)  
240V-50Hz (Australia)  
230V-50Hz (U.K., Europe)  
100V-50HZ (Japan)  
All others  
7/ 32” (5.8mm) strip  
Power Cord:  
6 Feet (1.9 meters)  
Model  
PS25 Plus  
PS30 Plus  
PS40  
Shredding Speed  
20 fpm  
Dimensions  
Weight  
8 lbs.  
(3.6 kg)  
9.25 lbs.  
(4.2 kg)  
15” x 16 1/ 2” x 10”  
(380 x 419 x 254 mm)  
17 1/ 4” x 14 3/ 4” x 10”  
(438 x 375 x 254 mm)  
(6 m/ min)  
20 fpm  
(6 m/ min)  
PS35  
PS25  
PS30  
PS50  
20 fpm  
(6 m/ min)  
2 1/ 2” x 15” x 5”  
(63.5 x 380 x 127 mm)  
7 lbs.  
(3.2 kg)  
A
B
C
D
E
F
20 fpm  
(6 m/ min)  
20 fpm  
(6 m/ min)  
12 fpm  
15” x 16 1/ 2” x 10”  
(380 x 419 x 254 mm)  
17 1/ 4” x 14 3/ 4” x 10”  
(438 x 375 x 254 mm)  
17 1/ 4” x 14 3/ 4” x 10”  
(438 x 375 x 254 mm)  
8 lbs.  
PS50 Plus  
(3.6 kg)  
9.25 lbs  
(4.2 kg)  
9.5 lbs.  
(4.3 kg)  
PS55  
DM-3/ PS45  
PS55CC  
(3.6 m/ min)  
Limited Warranty  
Fellowes Manufacturing Company warrants the cutting cylinders of all Fellowes shredders to be free from defects  
in material and workmanship for five years from the date of purchase by the original consumer. Fellowes warrants all  
other parts of the machine to be free of defects in material and workmanship for one year from the date of purchase  
by the original consumer. If any part is found to be defective during the warrant period, your sole and exclusive  
remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part.  
This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY,  
INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION  
TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any  
consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. You  
may have other legal rights that vary from state to state.  
For more detail or to obtain service under this warranty, please contact Fellowes Customer Service at 1-800-955-  
0959, Monday through Friday, 8 AM - 5 PM (Central Standard Time).  
For specific instructions on obtaining service under this warranty on machines purchased outside the USA, contact the  
appropriate location listed in the Contact for Service section of this instruction manual.  
Warrantor: Fellowes Manufacturing Company.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of Conformity  
Fellowes Manufacturing Company  
Doncaster Road, Kirk Sandall  
Doncaster, South Yorkshire, DN31H England  
declares that the product  
Models PS25, PS30, PS35 and PS40, with or without the suffix “Plus” conforms with the requirements of the Low  
Voltage Directive (73/ 23 EEC) and the Electromagnetic Compatibility Directive (89/ 336 EEC) and the following  
harmonized European Normes (EN Standards) and IEC Standards.  
Safety: EN60950 ‘Information Technology Equipment’  
EMC:  
Standard  
EN 55014  
EN 61000-3-2  
Severity Level  
Table 1&2  
Class A  
Performance Criteria  
N/ A  
N/ A  
Itasca, Illinois, USA  
April 30, 1999  
_____________________  
Anthony Storrie  
A
B
C
D
E
F
Declaration of Conformity  
Fellowes Manufacturing Company  
Doncaster Road, Kirk Sandall  
Doncaster, South Yorkshire, DN31H England  
declares that the product  
Models PS50 and PS55, with or without the suffix “Plus”  
conform with the requirements of the Low Voltage Directive (73/ 23 EEC) and the Electromagnetic Compatibility  
Directive (89/ 336 EEC) and the following harmonized European Normes (EN Standards) and IEC Standards.  
Safety: EN60950 ‘Information Technology Equipment’  
EMC:  
Standard  
EN 55014  
EN 55104  
EN 61000-3-2  
EN 61000-4-4  
EN 61000-4-5  
EN 61000-4-2  
EN 61000-4-11  
ENV 50141  
Severity Level  
Table 1&2  
T. 5,2  
Class A  
Level 2  
Performance Criteria  
N/ A  
N/ A  
N/ A  
B
Level 2  
B
EN 55104 T.6,1  
EN 55104 T.6,7  
EN 55104 T.6,3  
B
C
A
Itasca, Illinois, USA  
April 30, 1999  
_____________________  
Anthony Storrie  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Consumer Helpline  
Australia  
Canada  
1-800-33-11-77  
1-800-665-4339  
Mexico  
001-800-234-1185  
1-800-955-0959  
United States  
Europe  
00 800 1810 1810  
Fellowes Locations  
Australia  
Benelux  
Canada  
France  
011-613 93303211  
011-31-3473-77988  
905-475-6320  
+ 33 (0) 2-99-22-71-22  
+ 49 (0) 5131-4977-0  
+ 39 (0) 071-730041  
011-81-3-5496-2401  
82-2-3464-2884  
Germany  
Italy  
Japan  
Korea  
Poland  
+ 48-22-837-7356  
65-6221-3811  
Singapore  
United Kingdom  
+ 44 (0) 1302-836836  
© 1999 Fellowes Printed in U.S.A. Part No. 35206  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower 37948 User Manual
Crate Amplifiers Musical Instrument Amplifier CA60 User Manual
Curtis Clock Radio D 1855 User Manual
Curtis Coffee Grinder GSG 3BLK User Manual
Earlex Paint Sprayer V0053 User Manual
Extron electronic Stereo Amplifier P 2 DA2 PLUS User Manual
Fisher Paykel Humidifier MR480 User Manual
Fisher Price Car Seat T3643 User Manual
Flying Mole Stereo Amplifier DADM310 User Manual
GE Monogram Range ZDP486LRPSS User Manual