Everpure Water System EV3112 User Manual

Installation and Operation Guide  
High Flow CSR Filter Systems  
Selecting A Mounting locAtion  
1. Give consideration to the weight of the unit when operating (filled with water). Operating weights  
of High Flow CSR Systems are:  
• Twin System - 45 lbs (20.2 kg)  
• Triple System - 47 lbs (21.2 kg)  
• Quad System - 49 lbs (22.2 kg)  
• Quad Plus System - 49 lbs (21.2 kg) + separate surge/storage tank @ 60 lbs (27.2 kg)  
2. The location should allow for (See figures 1-8):  
• Minimum clearance of 212" under the cartridge(s) so it can be lowered for removal and  
replacement.  
• Adequate space for “in” and “out” water line connections. Be near a drain for flushing and near  
a 110V outlet if the optional EverguardLow Pressure Alarm is used.  
• Additional mounting and floor space for the separate SR-X Feeder and surge/storage tank(Quad  
Plus).  
Figure 1 – Twin  
Figure 2 – Triple  
Figure 3 – Quad  
operAting SpecificAtionS*  
replacement  
cartridge  
combined Model name  
flow rate  
capacity  
High Flow CSR Twin - MC  
High Flow CSR Twin - MC2  
High Flow CSR Twin - XC  
High Flow CSR Twin - XC2  
High Flow CSR Twin - 4CB5  
High Flow CSR Twin - 7CB5  
High Flow CSR Triple - MC  
High Flow CSR Triple - MC2  
High Flow CSR Triple - XC  
High Flow CSR Triple - XC2  
High Flow CSR Triple - 4CB5  
High Flow CSR Triple - 7CB5  
High Flow CSR Quad - MC  
High Flow CSR Quad - MC2  
High Flow CSR Quad Plus - XC  
High Flow CSR Quad Plus - XC2  
MC  
MC2  
XC  
3.3 gpm (12.5 lpm) 18,000 gal.(68,000 L)  
3.3 gpm (12.5 lpm) 18,000 gal.(68,000 L)  
3.3 gpm (12.5 lpm) 18,000 gal.(68,000 L)  
3.3 gpm (12.5 lpm) 18,000 gal.(68,000 L)  
3.3 gpm (12.5 lpm) 12,000 gal.(45,400 L)  
5.0 gpm (18.9 lpm) 20,000 gal.(75,700 L)  
5.0 gpm (18.9 lpm) 27,000 gal.(102,000 L)  
5.0 gpm (18.9 lpm) 27,000 gal.(102,000 L)  
5.0 gpm (18.9 lpm) 36,000 gal.(136,000 L)  
5.0 gpm (18.9 lpm) 36,000 gal.(136,000 L)  
5.0 gpm (18.9 lpm) 18,000 gal.(68,000 L)  
7.5 gpm (28.5 lpm) 30,000 gal.(113,550 L)  
6.6 gpm (25.2 lpm) 36,000 gal.(136,000 L)  
6.6 gpm (25.2 lpm) 36,000 gal.(136,000 L)  
6.6 gpm (25.2 lpm) 48,000 gal.(181,600 L)  
6.6 gpm (25.2 lpm) 48,000 gal.(181,600 L)  
XC2  
4CB5  
7CB5  
MC  
MC2  
XC  
XC2  
4CB5  
7CB5  
MC  
MC2  
XC  
XC2  
* For individual cartridge specifications, refer to cartridge literature.  
temperature: 35-100°F (2-38°C)  
pressure:  
10 - 125 psi (0.7 - 8.6 bar), non-shock  
For cold water use only.  
inStAllAtion  
1. Use the predrilled mounting holes in the manifold bracket as guides. Mark and drill anchor holes.  
Mount securely. See Figures 5-8.  
2. Shut off power to equipment. If system is a High Flow CSR Quad Plus (separate SR-X Feeder and  
surge/storage tank), proceed to step 3b.  
3a. Connect outlet ports of High Flow system to equipment served per the instructions below. Always  
use NSF approved pipe dope or Teflon tape at all connections. Use a backup wrench on all fittings  
while connecting to avoid stress on the system components.  
• The cross fitting before the SR-X Feeder has a threaded outlet on top. Connect a minimum 1/2"  
I.D. line from this outlet to fountain beverage equipment.  
• The cross fitting has a flushing valve installed on the bottom. Connect tubing to the flushing valve  
and run to drain. Note: Some municipal plumbing codes and good sanitary practices require an  
air gap at the drain termination point.  
Figure 4 – Quad Plus  
Manufactured by Everpure  
EV3112-78 Rev E AP08  
Download from Www.Somanuals.com. All Manuals Search And Download.  
cArtriDge cHAnge DeterMinAtion  
Replace the prefilter cartridge whenever it becomes excessively dirty (observed visually or by flow restriction). Follow the change instructions provided with  
the cartridge. Replace carbon filter cartridges when capacity is reached or when flow becomes inadequate, but at least annually. All carbon filter cartridges  
on multiple cartridge systems should be changed at the same time. Change the SS-10 cartridge when product level in the cartridge drops below 1/2" from  
the bottom of the bowl.  
The system pressure gauge or optional EverguardLow Pressure Alarm (LPA) provides a quick, simple means of determining when the filter cartridge(s)  
should be checked. Installed on the system outlet manifold, the gauge or LPA can be used to monitor both dynamic (flowing) and static (line) pressure. The  
cartridge(s) should be changed when the pressure gauge is in the red area while equipment is in operation, and yet the needle shows adequate line pressure  
between cycles. Observe the needle during the next equipment on cycle. If the needle registers adequate pressure, it can be assumed that the temporary  
low-pressure condition was caused by a brief power failure or other incoming pressure disruption. If the low pressure condition is not due to an external  
condition, check/change the prefilter first. If the low pressure condition is still not corrected, change the carbon filter cartridges.  
preSSure gAugeS  
Adequate Outlet  
Pressure  
Low Inlet  
Pressure  
Adequate Inlet  
Pressure  
Low Outlet  
Pressure  
cArtriDge cHAnge proceDure  
3. Clean bowl with filtered water only;  
e-Series prelter cartridge change  
NO SPECIAL CLEANERS.  
1. Shut off power to equipment. Shut  
off inlet water ahead of system.  
2. Push red relief valve. Unscrew  
bowl. Remove prefilter cartridge.  
4. Feel head o-ring. If dry, lubricate  
with high quality silicone lubricant.  
5. Install new prefilter cartridge in  
bowl. Hand tighten bowl onto head.  
6. Turn on water. Turn on power to  
equipment.  
flushing  
4. Pull cartridge downward and out of  
everpure carbon filter cartridge  
change  
2. Open flushing valve to relieve  
pressure.  
head.  
6. Turn cartridge right 90˚ until  
rotation stops.  
8. With flushing valve fully open, open  
inlet water at full force for five  
minutes. Close flushing valve.  
5. Hold head firmly. Align cartridge  
lug with label. Insert new cartridge  
firmly into head.  
1. Shut off power to equipment. Shut  
off inlet water ahead of system.  
3. Hold head firmly and push upward.  
Turn cartridge to left until it stops.  
7. Repeat steps 3-6 for remaining  
cartridges.  
9. Turn on power to equipment  
8. Turn on water.  
Sr-X feeder cartridge change  
2. Press red pressure relief button on  
4. Remove old cartridge.  
6. Install new SS-10 cartridge into  
9. Press red pressure relief button  
head.  
head.  
until water comes out of valve port.  
1. Shut off power to equipment. Shut  
off inlet water ahead of system.  
5. Feel bowl o-ring; if dry, lubricate  
with silicone lubricant.  
3. Unscrew bowl.  
7. Hand tighten bowl into head.  
10. Turn on power to equipment.  
for installations in Massachusetts, the commonwealth of Massachusetts plumbing code 248 cMr shall be adhered to. consult your licensed  
plumber for installation of the system. this system and its installation must comply with state and local regulations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
replAceMent pArtS  
System Tested and Certified by NSF International against  
NSF/ANSI Standards 42 and 53 for the reduction of:  
Contact your local Everpure dealer for filter cartridges or system replace-  
ment parts.  
Standard No. 42 —  
Aesthetic Effects  
Chemical Reduction  
Taste and Odor  
Chlorine  
Mechanical Filtration  
Particulate Class I: 99.2% reduction of particles  
one-half micron and larger in size  
Description  
part number  
EV3114-09  
EV3114-07  
EV3112-40  
EV3112-38  
EV3112-39  
EV3016-41  
EV3112-41  
Inlet/outlet pressure gauge  
Inlet/flushing valve  
O-ring for prefilter or SR-X  
Prefilter bowl  
Standard No. 53 —  
Health Effects  
Mechanical Filtration  
Turbidity (MC, MC2 only)  
Cyst (MC, MC2, XC, XC2 only)  
Asbestos (MC, MC2 only)  
SR-X bowl  
LPA pressure switch  
Wrench  
liMiteD WArrAnty  
coMMerciAl WAter treAtMent equipMent  
You have just purchased one of the finest water treatment units made. As an expression of our confidence in Everpure products, this product is warranted against defects in  
material and workmanship to the original end-user when installed in accordance with Everpure specifications. The warranty period commences from the date of purchase  
and is administered as follows:  
for a period of one yeAr  
for a period of fiVe yeArS  
replaceable elements (i.e., filter & water treatment cartridges)*  
the entire system (excluding replaceable elements)  
*this is for material & workmanship, not lter or water treatment cartridge life.  
The unit must be used in operating conditions that conform to Everpure’s recommended design guidelines. This warranty will not apply if the unit has been modified, repaired  
or altered by someone not authorized by Everpure.  
if a part described above is found defective within the specied period, you should notify everpure technical service at the phone number listed below. Any part  
found defective within the terms of this warranty will be repaired or replaced (at everpure’s discretion) by your local dealer or everpure technical service. you  
pay only freight from our factory and local dealer charges. Any repaired or replaced warranty item will be incorporated under the original warranty terms of the  
existing system.  
We are not responsible for damage caused by accident, fire, flood, freezing, Act of God, misuse, misapplication, neglect, oxidizing agents (such as chlorine, ozone,  
chloramines and other related components), alteration, installation or operation contrary to our printed instructions, or by the use of accessories or components which do not  
meet Everpure’s specifications. Refer to the specifications section in the Installation and Operating manual for approved application parameters.  
Our product performance specifications are furnished with each water treatment unit. TO THE EXTENT PERMITTED BY LAW, EVERPURE DISCLAIMS ALL IMPLIED WARRANTIES,  
INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE; TO THE EXTENT REQUIRED BY LAW, ANY SUCH IMPLIED  
WARRANTIES ARE LIMITED IN DURATION TO THE PERIOD SPECIFIED ABOVE FOR THE ENTIRE WATER TREATMENT UNIT. As a manufacturer, we do not know the characteristics  
of your water supply or the purpose for which you are purchasing this product. The quality of water supplies may vary seasonally or over a period of time, and your water  
usage rate may vary as well. Water characteristics can also differ considerably if this product is moved to a new location. For these reasons, we assume no liability for the  
determination of the proper equipment necessary to meet your requirements, and we do not authorize others to assume such obligations for us. Further, we assume no  
liability and extend no warranties, express or implied, for the use of this product with a non-potable water source or a water source which does not meet the conditions for  
use described in the owner’s guide or performance data sheet for this product. OUR OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED TO THE REPAIR OR REPLACEMENT  
(AT EVERPURE’S DISCRETION) OF THE FAILED PARTS OF THE WATER TREATMENT UNIT, AND WE ASSUME NO LIABILITY WHATSOEVER FOR DIRECT, INDIRECT, INCIDENTAL,  
CONSEQUENTIAL, SPECIAL, GENERAL OR OTHER DAMAGES.  
Some states do not allow the exclusion of implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Similarly,  
some states do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific  
legal rights, and you may also have other rights which vary from state to state. Consult your telephone directory for your local independently operated Everpure dealer, or  
write Everpure for warranty and service information.  
for sales, replacement components, and service, contact your everpure dealer or:  
everpure, llc: 1040 Muirfield Drive • Hanover Park, Illinois 60133 • 800.323.7873  
in europe: Toekomstlaan 30 • B-2200 Herentals, Belguim  
technical Service  
800.942.1153  
in Japan: Hashimoto MN Bldg. 7F • 3-25-1 Hashimoto Sagamihara-Shi • Kanagawa 229-1103, Japan  
Printed in U.S.A.  
EV3112-78 Rev E AP08  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cisco Systems Network Router 46 User Manual
Compaq Computer Drive DLT 80 User Manual
Craftsman Saw 113244513 User Manual
Cub Cadet Snow Blower 724 STE User Manual
Cuisinart Toaster Classic 2 Slice Toaster User Manual
Cypress Computer Hardware AN20639 User Manual
Dynex Paper Shredder DX OP102991 User Manual
Electro Voice Speaker EVI 15 User Manual
Fusion Flat Panel Television TV M160DVD User Manual
GE Washer Dryer commercial washer User Manual