EverFocus Security Camera EPTZ 100 User Manual

EPTZ 100  
Day / Night Speed Dome Camera  
INSTALLATION / OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
1
2
SAFETY WARNINGS................................................................................................................2  
INTRODUCTION ......................................................................................................................5  
2.1 Features .............................................................................................................................5  
2.2 Delivery scope.....................................................................................................................5  
2.3 Optional accessories............................................................................................................5  
2.4 Specifications ......................................................................................................................6  
2.5 Dimensions .........................................................................................................................8  
2.5.1  
2.5.2  
2.5.3  
2.5.4  
2.5.5  
2.5.6  
Dimensions with ceiling mount adapter ..........................................................................8  
Dimensions with recessed ceiling mount adapter ............................................................8  
Dimension EPTZ 100 with wall mount bracket EPTZ 100 WLM ........................................9  
Dimensions wall bracket EPTZ 100 WLM.......................................................................9  
Dimension EPTZ 100 with ceiling pendant bracket EPTZ 100 CPM ................................ 10  
Dimension ceiling pendant bracket EPTZ 100 CPM....................................................... 10  
3
INSTALLATION ...................................................................................................................... 11  
3.1 Mechanical........................................................................................................................ 11  
3.1.1  
3.1.2  
3.1.3  
3.1.4  
Ceiling mount ............................................................................................................ 11  
Recessed ceiling mount.............................................................................................. 12  
Wall mount................................................................................................................ 13  
Ceiling pendant mount................................................................................................ 14  
3.2 Electrical........................................................................................................................... 15  
3.2.1  
3.2.2  
3.2.3  
3.2.4  
Video........................................................................................................................ 15  
Power ....................................................................................................................... 15  
RS-485 ..................................................................................................................... 16  
Alarm........................................................................................................................ 19  
3.3 Communication settings ..................................................................................................... 20  
3.3.1  
3.3.2  
3.3.3  
Baud rate and Protocol............................................................................................... 20  
RS-485 ID (address) .................................................................................................. 21  
RS-485 bus termination.............................................................................................. 23  
3.4 Initial Start......................................................................................................................... 23  
OSD menu setup .................................................................................................................... 23  
4
4.1.1  
4.1.2  
4.1.3  
4.1.4  
4.1.5  
4.1.6  
4.1.7  
4.1.8  
4.1.9  
Operation in Setup Menu............................................................................................ 23  
Menu Structure.......................................................................................................... 24  
Main menu ................................................................................................................ 26  
System info ............................................................................................................... 26  
Display...................................................................................................................... 26  
Camera..................................................................................................................... 27  
Scan......................................................................................................................... 31  
Control...................................................................................................................... 35  
Privacy Mask............................................................................................................. 36  
4.1.10 Alarm........................................................................................................................ 37  
4.1.11 Initialize..................................................................................................................... 37  
OPERATION WITH EKB 500 KEYBOARD ................................................................................ 38  
5.1 EKB 500 operation with EverFocus protocol (EVF-2)........................................................... 39  
5
5.1.1  
5.1.2  
5.1.3  
5.1.4  
5.1.5  
5.1.6  
EPTZ 100 setup menu................................................................................................ 40  
Preset positions ......................................................................................................... 40  
Autopan .................................................................................................................... 40  
Preset tours............................................................................................................... 41  
Pattern tours.............................................................................................................. 41  
Remote switching of EPTZ 100 output relay ................................................................. 41  
5.2 EKB 500 Operation with Pelco-D/P Protocol........................................................................ 42  
5.2.1  
5.2.2  
5.2.3  
5.2.4  
5.2.5  
EPTZ 100 setup menu................................................................................................ 42  
Preset positions ......................................................................................................... 42  
Autopan .................................................................................................................... 43  
Preset tours............................................................................................................... 43  
Pattern tours.............................................................................................................. 43  
3
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2.6  
Remote switching of EPTZ 100 output relay ................................................................. 44  
6
7
8
APPENDIX A: Basic Settings at EKB 500 keyboard.................................................................... 45  
6.1 COM PORT SETTING - RS-485 interface setting.................................................................. 45  
6.2 DEVICE SETTING > CAMERA ........................................................................................... 45  
APPENDIX B: Basic Settings at EverFocus DVR ....................................................................... 46  
7.1 EDR / EDVR / EDSR series (except EDSR100, EDSR100H) ................................................. 46  
7.2 ECOR / PARAGON series .................................................................................................. 46  
Appendix C: Troubleshooting.................................................................................................... 47  
8.1 General malfunction........................................................................................................... 47  
8.2 Recovering Communication Settings of Camera Module........................................................ 47  
4
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 INTRODUCTION  
The mini PTZ speed dome EPTZ 100 provides ideal discreet surveillance for CCTV indoor applications.  
Engineered with the latest Digital Slow Shutter (DSS) x128 technology, EPTZ 100 can improve CCD  
sensitivity, producing quality images also under low light conditions.  
EPTZ 100 offers enhanced features such as privacy zones, noise reduction and 4 pattern tours with total  
40 minutes duration.  
2.1 FEATURES  
Compact size design for discreet surveillance (only 114 mm / 4.5" diameter)  
100x total zoom (10x optical: 3.8 ~ 38 mm and 10x digital autofocus zoom)  
High resolution 520 TVL (colour mode), 570 TVL (b/w mode)  
Image capture in almost complete darkness with DSS 128x max.  
True day/night operation with automatic IR cut filter  
High speed pan/tilt (up to 240° /sec.)  
360° endless pan  
Digital Noise Reduction  
4-zone privacy masking  
RS-485 communication with EverFocus, Pelco-D and Pelco-P protocol  
4x 10 minutes pattern tour (programmable camera movement)  
3 alarm inputs, 1 alarm output relay  
Includes adapter for ceiling surface mount and recessed ceiling mount.  
2.2 DELIVERY SCOPE  
1 x Speed dome camera module  
1 x Connector board  
1 x Ceiling mount adapter  
1 x Metal ring for recessed ceiling mount  
1 x Plastic cover ring for recessed ceiling mount  
1 x Drilling template for ceiling mount  
1 x Accessory / screw set  
1 x User manual  
2.3 OPTIONAL ACCESSORIES  
EPTZ 100 WLM  
EPTZ 100 CLM  
EKB 500  
Wall mount bracket  
Ceiling pendant mount adapter  
Universal RS-485 controller keyboard  
(type depends on sales region)  
24 VAC power supply  
5
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.4 SPECIFICATIONS  
Camera  
Sensor:  
Effective pixels:  
Horizontal resolution:  
1/4” CCD SONY Super HAD  
380.000 (NTSC), 440.000 (PAL)  
520 TV lines (colour mode)  
570 TV lines (b/w mode)  
0,7 lux (F 1.8, 50 IRE – colour mode)  
0,02 lux (F 1.8, 50 IRE – b/w mode)  
0.005 lux ( DSS x 128)  
Sensitivity:  
Video output:  
S/N ratio:  
Composite 1 Vp-p (sync. negative)  
over 50 dB  
Sync. system:  
Electronic shutter:  
internal  
1/60 ~ 1/120.000 NTSC, 1/50~ 1/120.000 PAL,  
automatic (ESC) or manual  
up to 128 x  
auto AWC / ATW mode, manual  
adjustable 3 steps / OFF  
adjustable 3 steps / OFF  
ON / OFF  
Digital Slow Shutter (DSS)  
White balance:  
Back light compensation:  
Gain:  
Flicker cancel:  
DNR Dynamic Noise Reduction:  
Day/night switching:  
adjustable 3 steps / OFF  
IRC + b/w switching manual / automatic  
Lens  
Zoom ratio:  
10x optical autofocus zoom  
(+10x digital zoom, max. 100x)  
f 3,8 (wide) ~ 38 (tele) mm  
F 1.6 (wide) ~ F 2.8 (tele)  
51.2° (wide end) to 5.58° (tele end)  
1,5 m  
Focus length:  
Aperture:  
Viewing angle:  
Minimum object distance:  
Focusing method:  
auto, one-push AF, manual  
Communication  
Communication:  
RS-485 simplex 2 wire  
Built-in protocols:  
Baud rate:  
Speed dome address range:  
EverFocus / Pelco-P / Pelco-D , setup by DIP switch  
2400 / 4800 / 9600 bps, setup by DIP switch  
1 ~ 255, setup by DIP switch  
Alarm  
Alarm:  
3 inputs, 1 output, with tour / position auto triggering  
PTZ / functionality  
Horizontal rotation range:  
Tilt rotation range:  
360° unlimited rotation  
90° with auto flip function  
Auto pan, 2 points scanning:  
Auto pan speed:  
adjustable speeds, adjustable end stops  
2, 6, 12, 30, 60, 120o / second  
Auto pan dwell time (A-B points):  
Preset positions:  
1,3,5,10,30,45 s  
64  
Preset tours:  
1 tour with first 16 positions, 4 group tours with 4 positions each,  
1 tour with individual setup up to 32 positions  
Dwell time at preset position:  
Pattern:  
1 ~ 255 s  
4 x pattern with up to 800 movements / 600 s PTZ recording each  
Running to position speed:  
Manual pan / tilt speed:  
Position accuracy:  
up to 240° / sec.  
0,5° ~ 240° / sec.  
0.225°  
6
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alarm:  
3 inputs, 1 output, with tour / position auto triggering  
yes  
4 zones, free adjustable  
multiline OSD setup menu  
after 1, 2, 3, 4, 5 or 10 min. no activity: go to  
BNC cable socket  
Proportional pan speed:  
Privacy zones:  
Setup:  
Auto resume:  
Video output:  
Power  
Power source:  
Power consumption:  
24 V AC +/- 10%  
19 W max. (with PTZ motors)  
12 W max. (without PTZ motors)  
Physical / environment  
Connectors:  
Video output: BNC cable socket  
Power/RS485/Alarm: connector cable, open cable end  
cable length: 90 cm  
Ambient temperature:  
Humidity:  
0°C ~ +40°C  
85% max  
Protection rating:  
Dimensions:  
IP20, for indoor applications only  
200 (height with ceiling mount adapter) x  
114 (diameter camera module) mm  
Details in dimension drawing  
Weight:  
Delivery scope:  
1.5 kg (camera module incl. adapter board)  
speed dome camera, connector board ceiling mount adapter, in-  
ceiling mount adapter, user manual, mounting accessories  
7
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.5 DIMENSIONS  
2.5.1 Dimensions with ceiling mount adapter  
170  
114  
2.5.2 Dimensions with recessed ceiling mount adapter  
114  
166  
8
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.5.3 Dimension EPTZ 100 with wall mount bracket EPTZ 100 WLM  
270  
2.5.4 Dimensions wall bracket EPTZ 100 WLM  
240  
240  
60  
80  
9
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.5.5 Dimension EPTZ 100 with ceiling pendant bracket EPTZ 100 CPM  
120  
2.5.6 Dimension ceiling pendant bracket EPTZ 100 CPM  
72  
80  
100  
10  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 INSTALLATION  
3.1 MECHANICAL  
3.1.1 Ceiling mount  
The ceiling mount accessories are included in the EPTZ 100 package.  
1. Use the drilling template to mark the drilling holes.  
1
2) Click the connector board into the ceiling adapter. Follow the red arrow marks at board and ceiling  
adapter for correct position.  
3
Connector  
board  
2
C ili  
d t  
3) Mount the ceiling adapter and connector board to the ceiling. For the cables, use either the side outlet  
or a hole in the ceiling.  
4) Plug the dome module in the ceiling adapter. Make sure that the position of the camera module  
connector fits the connector position of the connector board.  
5) After plug-in, turn the camera module some degrees clockwise to latch the camera module.  
6
4
5
6) Use the hex key to fix the camera position with the locking screw.  
11  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.1.2 Recessed ceiling mount  
Recessed ceiling mount is possible at open ceilings. A metal ring has to be mounted at ceiling side.  
1) Cut a 115mm / 4.6" hole into the ceiling.  
2) Drill 3 screw holes for mounting in the ceiling  
Use the metal ring as template for drilling holes.  
1
2
3) Plug the connector board to the dome module and latch it by turning clockwise.  
4) Remove the clear dome cover and click the plastic cover ring at the dome cover with some pressure.  
Mount the dome cover with ring to the camera module.  
3
4
5
5) Position the metal ring at top side of ceiling and mount the prepared speed dome module to the metal  
ring with 3 tapping screws.  
12  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.1.3 Wall mount  
Wall mount requires the optional bracket EPTZ 100 WLM.  
1) Assemble the connector board to the bracket adapter by 3 M4 screws. Follow the red arrow marks at  
both board and ceiling adapter for correct position.  
1
2) Remove the cable cover from the wall bracket.  
2
3) Mount the bracket adapter with connector board to the bracket.  
4) Mount the bracket to the wall.  
5) Plug the dome module in the ceiling adapter. Make sure that position of the camera  
module connector fits the correct position of the connector board.  
6) After plug-in, turn the camera module some degrees clockwise to latch the camera module.  
8
4
3
6
7
5
7) Assemble the cable cover.  
8) Use the hex key to fix the camera position with the locking screw.  
13  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.1.4 Ceiling pendant mount  
Ceiling pendant mount requires the optional adaptor EPTZ 100 CLM.  
1) Assemble the connector board to the bracket adapter by 3 M4 screws. Follow the red arrow marks at  
board and ceiling adapter for correct position.  
1
2) Mount the bracket adapter with the connector board to the EPTZ 100 CLM. For wiring, use the upper  
hole or side outlet of the tube.  
3) Mount the EPTZ 100 CLM to the ceiling.  
4) Plug the dome module in the ceiling adapter. Make sure that position of the camera module connector  
fits the correct position of the connector board.  
5) After plug-in, turn the camera module some degrees clockwise to latch the camera module.  
3
2
6
4
5
6) Use the hex key to fix the camera position with the locking screw.  
14  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2 ELECTRICAL  
3.2.1 Video  
EPTZ 100 provides a composite 1 Vp-p video output PAL/NTSC (video system depending on ordered  
version) with a BNC cable socket.  
Cameras and video displaying or processing equipment (DVRs, switchers etc.) require cabling with 75  
Ohm video cable, e.g. RG-59, RG-12, and suitable BNC plugs.  
Due to inappropriate absorbability, 50 Ohm coax cable (e.g. RG58), antenna cable and further types of  
coax cable are not suitable.  
Make sure that the video input of the connected video device is terminated with 75 Ohm.  
When interconnecting transmission lines (twisted pair, fibre optics, radio) to the speed dome, ensure the  
accurate receiver calibration.  
3.2.2 Power  
EPTZ 100 is powered by 24 VAC voltage. Connector is a 5.5 mm power cable socket.  
Make sure that the used power supply complies with the power requirements of the speed dome (19 W  
max.). 24 VAC / 1 A power source (or higher current) is recommended.  
NOTE: If the power supply is not located near the dome camera, make sure that the installation cables  
have sufficient diameter, otherwise the voltage drop over the power line will cause malfunction of  
the speed dome (min. 21.4 VAC at speed dome power input with active PTZ motors is required).  
NOTE: Do not connect the power until all installation steps are done!  
15  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2.3 RS-485  
EPTZ 100 uses RS-485 simplex wiring; the signal is transferred via a single twisted pair line. CAT5  
network cable is recommended, UTP version (unshielded) is sufficient for normal application. A shielded  
cable should be used if the installed cables are expected to be highly susceptible to interferences.  
Basically, the bus should be created by serial wiring, star wiring is only permitted using signal distributors.  
Maximum RS-485 bus cable length is 1200 m. Both the first and the last device are normally 120 Ohm  
terminated in order to minimize line reflexions.  
DS3 Termination switch ON  
Serial RS485 installation  
DS3 Termination switch ON  
Serial RS485 installation with connector boxes and stubs  
DS3 Termination  
DS3 Termination  
switch ON  
DS3 Termination  
switch ON  
switch ON  
Correct RS-485 star wiring with RS-485 distributor  
Incorrect RS-485 star wiring !  
16  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2.3.1RS-485 installation with EKB 500 keyboard  
For connection to EKB 500 via RS-485, it is recommended to use the EKB 500 connector box.  
The drawing below shows an installation example.  
Please make sure that the wires are connected with correct polarity.  
Alternatively, it is possible to connect the RS-485 wire directly to the keyboard by using a standard RJ45  
plug. The pin assignment is shown in the drawing below.  
Basic communication settings for EKB 500 are explained in Appendix A. For further details, please refer  
to the EKB 500 user manual.  
17  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2.3.2RS-485 installation with EverFocus DVR  
It is possible to control the EPTZ 100 speed dome by EverFocus DVR (except 1 Ch. models) via network.  
A combined local control by EKB 500 keyboard and remote (network) control by DVR is also possible.  
For a combined local and remote PTZ control, it is mandatory that DVR and speed dome are connected  
to the same RS-485 port of the EKB 500 keyboard. The RS-485 signal is looped through the DVR.  
Combined local and remote PTZ control  
Combined local and remote PTZ control with star wring to dome and RS-485 distributor  
The drawing below shows an incorrect RS-485 connection for controlling the DVR locally and remotely.  
With this way of installation, only local PTZ control is possible.  
Incorrect wring for combined local and remote PTZ control  
18  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2.4 Alarm  
EPTZ 100 provides 3 alarm input contacts and 1alarm output relay. It is also possible to trigger the alarm  
output relay by EKB 500 keyboard command.  
For input contacts, use dry Normal Open (N.O.) contacts only.  
The maximum load of output relay contacts is 30 V AC/DC 0.5 A max.  
19  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3 COMMUNICATION SETTINGS  
The setup for general RS-485 parameters - protocol type, RS-485 address and baud rate - is done by DIP  
switches, located at the top of the camera module.  
Correct settings are essential for communication with the dome controller.  
For correct communication, all 3 parameters - protocol, baud rate and RS-485 ID- have to comply with the  
PTZ controller settings.  
The 120 Ohm termination (DS3) is used at the last dome in the RS-485 bus for avoiding reflections in the  
RS-485 bus.  
Location of DIP switches:  
DS3  
DS1  
DS2  
DS1: Protocol and baud rate  
DS2: RS-485 ID (address)  
DS3: 120 Ohm termination of RS-485 bus  
3.3.1 Baud rate and Protocol  
The baud rate setting is done by switch 1 and 2 of DS1:  
The telemetry protocol setting is done by switch 3, 4 and 5 of DS1:  
20  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3.2 RS-485 ID (address)  
The RS-485 ID (address) setting is done by DIP switch DS2. The following table shows the switch  
positions for the possible addresses 1 ~ 255:  
21  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3.3 RS-485 bus termination  
The last device in an RS-485 bus should be terminated by 120Ohm resistor to avoid reflections on the  
bus (for details, please refer to chapter 3.2.3).  
The termination is done by DIP switch DS3.  
Termination ON  
Termination OFF  
3.4 INITIAL START  
After finishing all installation steps, power on the EPTZ 100.  
At power-up, EPTZ 100 will perform an initialization. The communication settings will briefly appear on the  
screen. Please check these information to ensure the correct DIP switch settings.  
Example:  
TYPE: EPTZ100  
Firmware: 709M/809Q  
BAUDRATE:9600  
RS-485 ID: 1  
PROTOCOL: EVERFOCUS  
4 OSD MENU SETUP  
4.1.1 Operation in Setup Menu  
Start EPTZ menu:  
If DVR Main monitor is selected ("DVR" in LCD display):  
CAM (hold) + MENU  
CAM MENU  
CAM MENU  
If no DVR main monitor is selected:  
MENU or CAM (hold) + MENU  
MENU CAM MENU  
MENU CAM MENU  
or alternatively in both modes:  
SHIFT (hold) + PRESET > 9 5 > ENTER  
SHIFT PRESET 9 5 ENTER  
SHIFT PRESET 9 5 ENTER  
Switch between the settings:  
Enter submenus:  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
in CAMERA > ADVANCED SETUP: IRIS +  
IRIS +  
IRIS +  
Change the settings:  
JOYSTICK  
JOYSTICK  
JOYSTICK  
EXIT OSD menu / submenus:  
Menu item EXIT/RETURN > JOYSTICK  
JOYSTICK  
JOYSTICK  
in CAMERA > ADVANCED SETUP: IRIS -  
IRIS -  
IRIS -  
Note: Exceptional commands are described in the OSD.  
23  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1.2 Menu Structure  
OSD Structure Part 1:  
MAIN MENU  
SYSTEM INFO  
DISPLAY  
SYSTEM INFO  
TYPE  
MAIN SETUP  
CAM TITLE  
WHITE BAL  
BACKLIGHT  
MOTION DET  
FOCUS  
FIRMWARE  
BAUDRATE  
RS-485 ID  
PROTOCOL  
CAMERA  
SCAN  
CONTROL  
PRIVACY MASK  
ALARM  
FOCUS SETUP  
MODE  
EXPOSURE  
SPECIAL  
DISPLAY  
ZOOM TRK  
CAMERA ID  
INITIALIZE  
EXIT  
RESET  
ZOOM SPEED  
D-ZOOM  
CAMERA NAME  
PRESET NUMBER  
PRESET NAME  
PTZ POSITION  
DISP ZOOM MAG  
ZOOM POS INIT  
LENS INIT  
CAMERA  
EXPOSURE SETUP  
BRIGHTNESS  
IRIS  
ZOOM SPEED  
ADVANCED SETUP  
RESCUE MODE  
BAUDRATE  
AUTO PAN  
PAN/TILT  
PAN ONLY  
CIRCLE  
SHUTTER  
AGC  
PARITY  
SSNR  
SENS-UP  
SCAN  
ALL PRESET  
SPEED  
AUTO PAN  
ALL PRESET  
GROUP SCAN  
TOUR SCAN  
PATROL  
DWELL  
SPECIAL SETUP  
USER PRESET  
PRIVACY  
RUN  
GROUP SCAN  
GROUP1  
DAY/NIGHT  
SYNC  
PATTERN  
GROUP2  
COMM ADJ  
IMAGE ADJ  
GROUP3  
GROUP4  
TOUR SCAN  
GROUP1  
GROUP2  
GROUP3  
GROUP4  
SPEED  
IMAGE SETUP  
FREEZE  
H-REV  
V-REV  
SHARPNESS  
COLOUR GAIN  
DWELL  
RUN  
PATROL  
PRESET  
SPEED  
DWELL  
RUN  
PATTERN 1  
RECORD  
PREVIEW  
RUN  
DELETE  
24  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Structure Part 2:  
MAIN MENU  
SYSTEM INFO  
DISPLAY  
CAMERA  
SCAN  
CONTROL  
PRIVACY MASK  
ALARM  
CONTROL  
AUTO RESUME  
MODE  
AUTO RESUME  
POWER ON RESUME  
IMAGE FLIP  
INITIALIZE  
EXIT  
TIME  
PRIVACY MASK  
MASK 1  
MASK 1  
POSITION  
ENABLE  
MASK 2  
MASK 3  
MASK 4  
ALARM  
RELAY  
INPUT 1  
INPUT 2  
INPUT 3  
OUTPUT  
INITIALIZE  
POWER ON RESET  
CAMERA DEFAULT  
FACTORY DEFAULT  
LENS REFRESH  
CAMERA REFRESH  
25  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1.3 Main menu  
After opening OSD setup the MAIN menu is shown at the screen:  
MAIN MENU  
SYSTEM INFO  
DISPLAY  
CAMERA  
SCAN  
CONTROL  
PRIVACY MASK  
ALARM  
INITIALIZE  
EXIT  
Select a menu item with UP/DOWN, RIGHT will open submenu.  
NOTE: The OSD menu has a timeout function. After 2 minutes with no activity, the OSD menu will close  
automatically.  
4.1.4 System info  
This menu shows the camera type, firmware version and communication settings.  
There are no editable items in this menu.  
SYSTEM INFO  
TYPE  
EPTZ100  
709M809Q  
9600  
FIRMWARE  
BAUD RATE  
RS-485 ID  
PROTOCOL  
1
EVERFOCUS  
4.1.5 Display  
The settings in this menu define the overlay displays of the camera.  
CAMERA ID  
Shows the RS-485 ID on the screen:  
ON: display of RS-485 ID  
OFF: no display of RS-485 ID  
CAMERA NAME  
With setting ON, a camera title with up to 16 characters can be entered.  
ON: display of camera title (with option for edit)  
OFF: no title display  
PRESET NUMBER  
PRESET NAME  
ON: display number of active preset  
OFF: no preset number display  
ON: display of a freely editable title (up to 16 characters) of the preset  
(available for presets 1 ~ 32)  
OFF: no display of preset name  
PTZ POSITION  
RETURN  
ON: show coordinates for pan and tilt in degrees and zoom ratio  
OFF: no PTZ position display  
Returns to main menu  
26  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1.6 Camera  
This menu provides the camera video settings.  
CAMERA  
ZOOM SPEED  
Zoom speed setup in 8 possible levels:  
Level 1: slowest to Level 8: fastest  
ADVANCED SETTING  
RESCUE MODE  
Opens submenu for camera features (following chapter)  
Mode for recovering serial communication between speed dome and camera  
module. This mode is not needed for normal setup. Keep setting OFF.  
For details consult APPENDIX C: Troubleshooting  
BAUD RATE  
PARITY  
Baudrate display for RESCUE MODE. This parameter is not needed for normal  
setup.  
For details consult APPENDIX C: Troubleshooting  
Display of parity setting for RESCUE MODE. This parameter is not needed for  
normal setup.  
For details consult APPENDIX C: Troubleshooting  
RETURN  
Returns to main menu  
4.1.6.1Advanced setting (camera setup)  
NOTE: This menu and its submenus require an operation different from the other EPTZ 100 OSD menus:  
Switch between the settings:  
Switch to submenu / enter:  
Leave the menu:  
JOYSTICK  
JOYSTICK  
JOYSTICK  
IRIS +  
IRIS +  
IRIS +  
Menu item "EXIT", confirm with IRIS +  
IRIS +  
IRIS +  
MAIN SETUP  
CAM TITLE  
WHITE BAL  
Alternative camera title display option. Please leave this setting OFF and use  
"CAMERA NAME" in DISPLAY menu for editing / displaying camera title  
White Balance mode:  
ATW  
Auto-tracking white balance. ATW continuously checks the whole image,  
weights all colours in the picture and updates the white level and colour  
temperature which is suitable for constantly changing scene.  
2 options are available for ATW indoor and outdoor. Indoor mode tends  
to be more blue and outdoor mode adds more red to the whole image.  
AWC  
Auto white balance. Camera will make colour calibration of the picture  
for once and keep the colour temperature until the next command is  
given. To refresh the colour, a manual trigger needs to be done to the  
AWC when shown on the display.  
Manual Manual adjustment of colour preference. With manual setting, the colour  
temperature can be fixed which can be suitable for indoor and static  
environment.  
If the lighting is Tungsten or similar (more natural), try to either add  
27  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
some blue or reduce some red; if lighting is fluorescent or within white  
spectrum, try to either add some red or reduce some blue.  
Default values are 30 (for RED) and 40 (for BLUE); it is recommended  
not to set the values too far away from these two default values.  
BACKLIGHT  
Back light compensation improves the image quality in scenes with extreme light behind the  
object which usually washes out the image considerably. Back light function is used to  
reduce, if necessary, both exposure time and video gain to avoid over-exposure.  
Use the back light compensation for sceneries with back light only; under normal light  
conditions, the BLC may impair the image quality.  
OFF  
BLC not active  
LOW; MIDDLE; HIGH Levels of BLC gain. Set the level as low as possible to avoid  
overmodulation.  
MOTION DET  
FOCUS  
EPTZ 100 does not support this feature. Please leave the setting on OFF.  
Submenu for setup of focus modes and features:  
ONE_PUSH The one-push function focuses the lens after each pan / tilt / zoom  
operation and turns autofocus off after focusing.  
This mode is recommended for most applications.  
AUTO  
The AUTO mode enforces the lens to automatically adjust its  
focusing when either the object moves or the scene has changed.  
NOTE: The autofocus function requires adequate illumination of the  
scenery. Especially in low lux environment, it is recommended to use  
the "One Push" autofocus mode, not the "AUTO" mode.  
MANUAL Manual mode to finetune and obtain the optimum focusing.  
In certain conditions, such as weak contrast, dark sceneries etc., the  
autofocus function of the camera may not get the best focus position.  
In such case, the focus can be adjusted manually.  
ZOOM TRK Zoom tracking - with setting ON, the lens tries to keep focus also  
during zoom in / zoom out operation.  
Dependencies zoom modes:  
Focus  
Mode  
One-Push  
AUTO  
Manual  
ZOOM-TRK  
ZOOM-TRK  
ON  
ZOOM-TRK  
Action  
ON  
off  
off  
n/a  
off  
Change in scene  
no action no action focusing  
focusing  
no action  
Zooming  
focusing  
focusing focusing  
at stop  
focusing  
focusing  
at stop  
Pan/Tilt  
focusing at focusing focusing  
stop at
 
stop  
focusing at focusing focusing  
stop at
 
stop  
focusing  
focusing  
no action  
no action  
& tilting  
Go to Preset  
ZOOM SPEED  
D-ZOOM  
Zoom speed setting: FAST or SLOW  
Value for maximum digital zoom ratio LIMIT x2 ~ x10  
DISP ZOOM MAG  
ON: Overlay display of zoom position on the screen  
28  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ZOOM POS INIT  
Defines a zoom position after powering up the camera,  
range is x1 ~ x10  
LENS INIT  
END  
Reset of the autofocus lens in case of malfunction  
Return to CAMERA ADVANCED SETTING page  
Image brightness setting, range 1~100  
Mode of the lens iris:  
EXPOSURE  
BRIGHTNESS  
IRIS  
AUTO:  
MANUAL:  
automatic iris mode  
manual iris operation  
SHUTTER  
Electronic exposure control  
ESC: Electronic auto shutter, the shutter speed is  
automatically adapted to light conditions  
NOTE: This mode item is only available for setup  
if IRIS mode is set to "MANUAL"  
MANUAL: Manual setup of shutter speed  
A.FLK: Flickerless mode. Useful in sceneries with light  
sources powered with a frequency different  
from the camera  
AGC  
Automatic Gain Control, gains video signal under low light  
conditions.  
HIGH: AGC ON, high gain  
NORMAL: AGC ON, normal gain  
OFF: AGC off (SSNR and SENS-UP are not available in  
this mode)  
SSNR  
Signal noise reduction. This feature improves the signal-  
noise ratio under low-light conditions.  
OFF: no noise reduction  
LOW, MID, HIGH: level of noise reduction  
NOTE: this feature requires setting AGC: NORMAL or  
HIGH  
SENS-UP  
The SENS-UP function increases the light sensitivity by  
interpolation of several images.  
AUTO: SENS-UP function active. Enter the submenu to  
enter the number of maximum interpolated  
pictures (2 ~ 128)  
NOTE: Please consider that a higher value  
creates brighter pictures, but due to the  
longer calculation time moving objects  
may appear distorted in the picture.  
(effect similar to longer exposure time at  
photo cameras)  
OFF: no SENS-UP function  
NOTE: this feature requires setting AGC: NORMAL or  
HIGH  
END  
Return to CAMERA ADVANCED SETTING page  
29  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL  
Submenu for advanced camera functions:  
USER PRESET  
Not supported by EPTZ 100  
PRIVACY  
Keep OFF setting, privacy mask setup is done in the  
PRIVACY MASK menu, available in the main menu  
DAY/NIGHT  
Modes of the day/night switching:  
B/W : black/white (night) mode, IR cut filter switched off  
COLOUR: colour (day) mode, IR cut filter switched on  
AUTO1: day/night switching with short delay time  
AUTO2: day/night switching with longer delay time  
SYNC:  
Synchronization mode, fixed at INTERNAL mode  
Communication settings for camera interface  
COMM ADJ  
ATTENTION:  
Do not change any value in this submenu!  
Keep default settings:  
CAM ID  
0
DISP CAM ID OFF  
BAUD RATE 38400  
UART MODE 8-N-1  
RET PKT  
ENABLE  
If these settings are changed for whatever reason, the  
communication between dome electronics and camera  
menu will be broken. In this case consult APPENDIX C  
for recovering camera module communication settings.  
IMAGE ADJ  
FREEZE: Store ("freeze") current video image  
H-REV: Flips the image horizontally  
V-REV: Flips the image vertically  
SHARPNESS: Image sharpness adjustment in the range  
1 ~ 30  
COLOUR GAIN: Colour saturation adjustment in the  
range 1~ 50  
END  
Return to CAMERA ADVANCED SETTING page  
RESET  
EXIT  
Reset of the camera parameters to factory defaults.  
Return to CAMERA menu.  
30  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1.7 Scan  
This menu contains all setup options for automatic dome modes such as autopan, preset tours and  
pattern.  
SCAN  
AUTO PAN  
ALL PRESET  
GROUP SCAN  
TOUR SCAN  
PATROL  
PATTERN  
AUTO PAN  
PAN/TILT  
This autopan mode performs pan and tilt movements between 2  
points. The vertical movement will be processed in programmed  
speed from start / end point, the resulting movement is shown if  
the schema below:  
START  
END  
Left autopan limit. Move to the position and press  
IRIS - to store the start point.  
Right autopan limit. Move to the position and press  
IRIS - to store the end point.  
SPEED  
DWELL  
Autopan speed, range from 2 (slowest) to 180  
(fastest).  
Dwell time at start and end position, adjustable  
1~45 seconds.  
RUN  
Autopan start (this function will close OSD menu)  
Return to AUTO PAN menu.  
RETURN  
PAN ONLY This autopan mode performs a horizontal movement between 2  
points.  
START  
END  
Left autopan limit. Move to the position and press  
IRIS - to store the start point.  
Right autopan limit. Move to the position and press  
IRIS - to store the end point.  
SPEED  
DWELL  
RUN  
Autopan speed, range from 2 (slowest) to 180  
(fastest)  
Dwell time at start and end position, adjustable  
1~45 seconds.  
Autopan start (this function will close OSD menu).  
31  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RETURN  
Return to AUTO PAN menu.  
CIRCLE  
This autopan mode performs a continuous horizontal 360°  
movement.  
TILT  
LEVEL  
Adjust the vertical position of the camera, press  
IRIS - to store the vertical angle.  
SPEED  
Autopan speed, range from 2 (slowest) to 180  
(fastest).  
RUN  
Autopan start (this function will close OSD menu).  
Return to AUTO PAN menu.  
RETURN  
RETURN  
Return to SCAN menu.  
ALL PRESET  
This type of preset tour includes all programmed preset positions.  
SPEED  
DWELL  
RUN  
Pant/tilt speed for movement between preset  
positions, range from 2 (slowest) to 180 (fastest)  
Dwell time at preset positions, adjustable 1~45  
seconds (global setting for all presets).  
Start preset tour (this function will close OSD  
menu).  
RETURN  
Return to SCAN menu.  
GROUP SCAN  
Pre-defined preset tours with 4 preset positions each:  
Group 1: preset positions 1~4  
Group 2: preset positions 5~8  
Group 3: preset positions 9~12  
Group 4: preset positions 13~16  
GROUP1  
SPEED  
DWELL  
RUN  
Pant/tilt speed for movement between preset  
positions, range from 2 (slowest) to 180 (fastest)  
Dwell time at preset positions, adjustable 1~45  
seconds (global setting for all presets).  
Start GROUP tour (this function will close OSD  
menu).  
RETURN  
Return to SCAN menu.  
similar setup as Group 1  
similar setup as Group 1  
similar setup as Group 1  
GROUP2  
GROUP3  
GROUP4  
32  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOUR SCAN  
Combined preset tour with selected GROUP tours.  
GROUP1  
GROUP2  
GROUP3  
GROUP4  
SPEED  
ON:  
Group1 included in tour  
OFF: Group1 skipped in tour  
ON:  
Group 2 included in tour  
OFF: Group 2 skipped in tour  
ON:  
Group3 included in tour  
OFF: Group3 skipped in tour  
ON:  
Group4 included in tour  
OFF: Group4 skipped in tour  
Pant/tilt speed for movement between preset  
positions, range from 2 (slowest) to 180 (fastest)  
DWELL  
RUN  
Dwell time at preset positions, adjustable 1~45  
seconds (global setting for all presets).  
Start preset tour (this function will close OSD  
menu).  
RETURN  
Return to SCAN menu.  
PATROL  
The PATROL tour is the most flexible preset tour with selected presets as well  
as individual speed and dwell time setting for each preset. The maximum  
number of preset positions in this tour is 32 (preset numbers 1~32) .  
PRESET x  
Select a preset (1~32):  
ON: preset included in the tour  
OFF: preset skipped in the tour  
SPEED  
DWELL  
RUN  
Pant/tilt speed for movement to this preset, range  
from 2 (slowest) to 180 (fastest)  
Dwell time at selected preset position, adjustable  
1~45 seconds.  
Start preset tour (this function will close OSD  
menu).  
RETURN  
Return to SCAN menu.  
33  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PATTERN  
A pattern is a programmed course of camera movement. EPTZ 100 can store 4  
patterns with a maximum length of 10 minutes each.  
1~4  
Select a pattern for programming / checking.  
RECORD  
Start the movement programming with "Go To  
Preset 1". All manual movements / zoomings are  
recorded now. The TIMER in the display counts  
down the available time remaining in seconds.  
PREVIEW  
RUN  
Shows the programmed pattern. Any pan / tilt  
command returns to PATTERN menu.  
Starts the selected pattern (this function will close  
OSD menu).  
DELETE  
RETURN  
Deletes the selected pattern.  
Return to SCAN menu.  
Return to MAIN menu.  
RETURN  
34  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1.8 Control  
This menu provides settings for resume function after inactivity, power-up and special functions.  
AUTO RESUME  
OFF/ON >  
AUTO RESUME is the reaction of the dome after a defined  
time of inactivity (no operator action).  
ON:  
auto resume activated  
OFF: auto resume not active  
MODE Type of resume reaction:  
AP(P/T)  
AP(C)  
AP(P)  
A-B autopan (pan/tilt)  
360° autopan (circle)  
A-B autopan (pan only)  
ALL PRESET preset tour with all presets  
GROUP1....4 GROUP preset tour 1~4  
TOUR  
PATROL  
preset tour with selected GROUPS  
preset tour with selected preset  
positions  
PRESET x  
go to preset position x  
NOTE: The HOME key of EKB 500 keyboard  
performs a "Go to Preset 1" command. If  
similar functionality is desired for AUTO  
RESUME, select "PRESET 1" in this menu.  
TIME  
Duration of inactivity before performing the AUTO  
RESUME reaction, adjustable from 1 to 10 minutes.  
POWER ON  
RESUME  
OFF/ON  
OFF/ON  
Resume action after power-up of the dome.  
ON: after dome initialization at power-up, the dome  
will start in the mode which is defined under  
AUTO RESUME.  
OFF: no resume function at power-up  
IMAGE FLIP  
RETURN  
ON: image is displayed horizontally flipped ("mirror")  
OFF: normal image display  
Return to MAIN menu  
35  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1.9 Privacy Mask  
EPTZ 100 allows for masking 4 different areas to protect private or confidential zones in the field of view.  
MASK1~4  
OFF/ON shows the status of the privacy zone:  
ON: privacy zone masking active  
OFF: privacy zone off  
RIGHT enters the submenu to mask setup  
POSITION  
Definition of size and position of the privacy zone:  
Step 1: the corner in the screen marks the upper left border of the privacy  
zone:  
IRIS OPEN:NEXT STEP  
Move the camera to the desired position and press IRIS OPEN (+) to  
proceed.  
Step 2: next screen shows the lower right border of the privacy zone:  
IRIS CLOSE TO EXIT  
Move the camera to the desired position and press IRIS CLOSE (-) to  
proceed.  
The defined mask will appear on the screen.  
ENABLE  
RETURN  
ON:  
privacy zone masking active  
OFF: privacy zone off  
Returns to privacy mask menu.  
Returns to MAIN menu.  
RETURN  
NOTE: If privacy masking is active, the pan / tilt speed of the dome is reduced for ensuring correct  
processing of privacy masks.  
36  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1.10 Alarm  
In this menu, the alarm reactions for input contacts are defined.  
RELAY  
OFF/ON  
It is possible to switch the output relay remotely with  
this menu item for test purpose:  
ON:  
output relay switched  
OFF: output relay not active (off)  
INPUT1...3  
OUTPUT  
PRESET x  
OFF/ON  
Assignment of the preset position which is linked to  
alarm input.  
Select preset position 1~32.  
ON: the camera will go to preset [assigned preset  
position in lines above] in case of alarm.  
In case of alarm, the camera moves to the  
defined preset and stays there until manual  
PTZ control or any programmed AUTO  
RESUME function is carried out  
OFF: no reaction in case of active alarm input  
RETURN  
Return to main menu.  
4.1.11 Initialize  
POWER ON RESET  
CAMERA DEFAULT  
FACTORY DEFAULT  
ON: performs a PTZ initialization similar to power on  
OFF: returns to INITIALIZE menu  
ON: reset of the camera module to factory settings  
OFF: returns to INITIALIZE menu  
ON: reset of the pan/tilt electronics module to factory  
settings  
OFF: returns to INITIALIZE menu  
LENS REFRESH x DAYS  
OFF,  
1...15  
Frequent initialization of zoom lens for better stability  
and preset precision.  
OFF: no frequent initialization  
1...15: interval in days for initialization  
CAMERA REFRESH x DAYS OFF,  
1...15  
Frequent initialization of pan/tilt mechanism for better  
stability and preset precision.  
OFF: no frequent initialization  
1...15: interval in days for initialization  
37  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 OPERATION WITH EKB 500 KEYBOARD  
The following chapter describes the EPTZ 100 operation with EKB 500 keyboard (with firmware 1.5 or  
higher).  
EPTZ 100 is optimized for protocol type EVF-2 of EKB 500 keyboard.  
Basic communication settings for EKB 500 are described in APPENDIX A.  
For further details, please refer to the EKB 500 user manual.  
The following operating elements are available for EPTZ 100 PTZ control:  
General key description:  
IRIS + / -:  
IRIS + / -:  
IRIS + / -:  
FOCUS F. / N.:  
FOCUS F. / N.:  
FOCUS F. / N.:  
manual iris control, + opens iris, - closes iris  
manual focus, F. TELE; N. WIDE  
ZOOM IN / OUT:  
ZOOM IN / OUT  
ZOOM IN / OUT  
POSITION:  
POSITION  
POSITION  
zoom keys, same function as joystick rotation, IN = TELE, OUT = WIDE  
start and save positions  
TOUR:  
TOUR  
TOUR  
A.PAN:  
A.PAN  
A.PAN  
HOME:  
HOME  
HOME  
start preset tours and pattern tours  
autopan, start and save automatic pan operation  
go to home position (preset position 1)  
F4:  
F4  
F4  
MENU:  
MENU:  
MENU:  
remote switching of EPTZ 100 output relay  
opens EPTZ 100 OSD setup menu  
SHIFT:  
SHIFT  
SHIFT  
switch key for second key level (depending on function)  
38  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.1 EKB 500 OPERATION WITH EVERFOCUS PROTOCOL (EVF-2)  
Operation outline  
Function  
Keys / operation  
Open dome menu  
MENU or CAM (hold) + MENU (if main monitor of DVR is selected)  
MENU CAM MENU  
MENU CAM MENU  
or SHIFT (hold)+ POSITION > 95  
SHIFT POSITION > 95  
SHIFT POSITION > 95  
Switch menu functions  
Change menu settings  
Leave dome menu  
Pan/tilt  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
CLR (hold) + MENU or menu item EXIT > ENTER  
CLR MENU ENTER  
CLR MENU ENTER  
JOYSTICK  
JOYSTICK  
JOYSTICK  
Zoom TELE / WIDE  
TELE: ZOOM IN or JOYSTICK rotation to the right  
ZOOM IN JOYSTICK  
ZOOM IN JOYSTICK  
WIDE: ZOOM OUT or JOYSTICK rotation to the left  
ZOOM OUT JOYSTICK  
ZOOM OUT JOYSTICK  
Focus  
TELE: FOCUS F. ; WIDE: FOCUS N.  
FOCUS F. FOCUS N.  
FOCUS F. FOCUS N.  
Iris open / close  
Open iris: IRIS + / close iris: IRIS -.  
IRIS + IRIS -.  
IRIS + IRIS -.  
Go to position (preset)  
Save position (preset)  
Delete preset  
Preset number + POSITION / POSITION + preset number > ENTER  
POSITION POSITION ENTER  
POSITION POSITION ENTER  
SHIFT (hold) + POSITION > preset number > ENTER  
SHIFT POSITION ENTER  
SHIFT POSITION ENTER  
CLR (hold) + POSITION > preset number > ENTER  
CLR POSITION ENTER  
CLR POSITION ENTER  
Start patrol tour  
TOUR > 1 > ENTER  
TOUR ENTER  
TOUR ENTER  
1
1
Start all preset tour  
Start preset tour Group 1  
Start preset tour Group 2  
Start preset tour Group 3  
Start preset tour Group 4  
Start preset Tour Scan  
Start pattern 1  
TOUR > 2 > ENTER  
TOUR ENTER  
TOUR ENTER  
2
2
TOUR > 3 > ENTER  
TOUR ENTER  
TOUR ENTER  
3
3
TOUR > 4 > ENTER  
TOUR ENTER  
TOUR ENTER  
4
4
TOUR > 5 > ENTER  
TOUR ENTER  
TOUR ENTER  
5
5
TOUR > 6 > ENTER  
TOUR ENTER  
TOUR ENTER  
6
6
TOUR > 7 > ENTER  
TOUR ENTER  
TOUR ENTER  
7
7
TOUR > 17 > ENTER  
TOUR 17 ENTER  
TOUR 17 ENTER  
Start pattern 2  
TOUR > 18 > ENTER  
TOUR 18 ENTER  
TOUR 18 ENTER  
Start pattern 3  
TOUR > 19 > ENTER  
TOUR 19 ENTER  
TOUR 19 ENTER  
Start pattern 4  
TOUR > 20 > ENTER  
TOUR 20 ENTER  
TOUR 20 ENTER  
Start autopan  
A.PAN > speed [enter any value, the speed is defined in OSD  
A.PAN  
A.PAN  
menu]> ENTER  
ENTER  
ENTER  
360° autopan  
SHIFT (hold) + A.PAN > speed [enter any value, the speed is  
SHIFT A.PAN  
SHIFT A.PAN  
defined in OSD menu]> ENTER  
ENTER  
ENTER  
Start home position  
Switch ON output relay  
Switch OFF output relay  
PTZ - Initialization  
HOME  
HOME  
HOME  
F4 > 1 > ENTER  
F4 > 1 > ENTER  
F4 > 1 > ENTER  
CLR + F4 > 1 > ENTER  
CLR + F4 > 1 > ENTER  
CLR + F4 > 1 > ENTER  
POSITION > 80 > ENTER  
POSITION 80 ENTER  
POSITION 80 ENTER  
39  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.1.1 EPTZ 100 setup menu  
Start EPTZ menu:  
If DVR Main monitor is selected ("DVR" in LCD display):  
CAM (hold) + MENU  
CAM MENU  
CAM MENU  
If no DVR main monitor is selected:  
MENU or CAM (hold) + MENU  
MENU CAM MENU  
MENU CAM MENU  
or alternatively in both modes:  
SHIFT (hold) + PRESET > 9 5 > ENTER  
SHIFT PRESET 9 5 ENTER  
SHIFT PRESET 9 5 ENTER  
Switch between the settings:  
Enter submenus:  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
in CAMERA > ADVANCED SETUP: IRIS +  
IRIS +  
IRIS +  
Change the settings:  
JOYSTICK  
JOYSTICK  
JOYSTICK  
EXIT OSD menu / submenus:  
Menu item EXIT/RETURN > JOYSTICK  
JOYSTICK  
JOYSTICK  
in CAMERA > ADVANCED SETUP: IRIS -  
IRIS -  
IRIS -  
Note: Exceptional commands are described in the OSD.  
5.1.2 Preset positions  
Up to 64 preset PTZ positions can be stored in EPTZ 100.  
Save presets  
SHIFT (hold) + POSITION  
SHIFT POSITION  
SHIFT POSITION  
> [ preset number ] > ENTER  
ENTER  
ENTER  
Camera:0001 Save to  
Position:___[1-192]  
Delete preset  
Camera:0001  
Del Position:___  
CLR (hold) + POSITION  
CLR POSITION  
CLR POSITION  
> [ preset number ] > ENTER  
ENTER  
ENTER  
Start (go to) preset  
Camera:0001 go to  
Position:___[1-192]  
POSITION > [ preset number ] > ENTER  
POSITION  
POSITION  
ENTER  
ENTER  
5.1.3 Autopan  
The speed for autopan function is programmed in OSD menu; the entered value for speed in EKB 500 will  
be ignored at start of autopan.  
Activate A-B autopan (pan between 2 points)  
A.PAN > any value 1~ 239 > ENTER  
A.PAN 1~ 239 ENTER  
A.PAN 1~ 239 ENTER  
Speed:___[1-239]  
[ENT] to start.  
Activate 360° autopan  
SHIFT (hold) + A.PAN > any value 1~ 239 > ENTER  
SHIFT  
SHIFT  
A.PAN  
A.PAN  
1~ 239 ENTER  
1~ 239 ENTER  
40  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.1.4 Preset tours  
EPTZ 100 provides 7 different preset tour modes. All tours are defined in OSD setup menu.  
1. PATROL TOUR:  
2. ALL PRESET TOUR:  
3. GROUP 1 TOUR:  
4. GROUP 2 TOUR:  
5. GROUP 3 TOUR:  
6. GROUP 4 TOUR:  
7. TOUR SCAN:  
Preset tour with up to 16 selected presets.  
Preset tour with all available presets.  
Preset tour with presets 1~4  
Preset tour with presets 1~4  
Preset tour with presets 1~4  
Preset tour with presets 1~4  
Preset tour with defined preset GROUPS  
TOUR > [tour number 1...7] > ENTER  
TOUR  
TOUR  
ENTER  
ENTER  
Camera:0001  
Run Tour:__[1-16]  
Tour numbers:  
[1] PATROL TOUR  
[2] ALL PRESET TOUR  
[3] GROUP 1 TOUR  
[4] GROUP 2 TOUR  
[5] GROUP 3 TOUR  
[6] GROUP 4 TOUR  
[7] TOUR SCAN  
Alternative for ALL PRESET TOUR:  
POSITION > 99 > ENTER  
POSITION 99 ENTER  
POSITION 99 ENTER  
5.1.5 Pattern tours  
EPTZ 100 provides 4 programmed pattern tours with up to 10 minutes duration each.  
The pattern tours are started with the TOUR key.  
TOUR  
TOUR  
TOUR > [tour number 17...20] > ENTER  
TOUR  
TOUR  
ENTER  
ENTER  
Camera:0001  
Run Tour:__[1-16]  
Tour numbers:  
[17] Pattern 1  
[18] Pattern 2  
[19] Pattern 3  
[20] Pattern 4  
5.1.6 Remote switching of EPTZ 100 output relay  
The EKB 500 keyboard provides the option to switch the output relay of EPTZ 100 on / off.  
Switch relay ON:  
F4 > [1] > ENTER  
F4 > [1] > ENTER  
F4 > [1] > ENTER  
Switch Alarm Out: _  
[ 1-8] ON  
Alternative:  
POSITION > 82 > ENTER  
POSITION 82 ENTER  
POSITION 82 ENTER  
Switch relay OFF:  
CLR + F4 > [1] > ENTER  
CLR + F4 > [1] > ENTER  
CLR + F4 > [1] > ENTER  
Switch Alarm Out: _  
[ 1-8] OFF  
Alternative:  
POSITION > 81 > ENTER  
POSITION 81 ENTER  
POSITION 81 ENTER  
41  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2 EKB 500 OPERATION WITH PELCO-D/P PROTOCOL  
NOTE: Not all EPTZ 100 functions are available in PELCO-D/P protocol. Operation for ssome functions is  
different to operation with EVERFOCUS protocol.  
5.2.1 EPTZ 100 setup menu  
Start EPTZ 100 menu:  
If DVR Main monitor is selected ("DVR" in LCD display):  
CAM (hold) + MENU  
CAM MENU  
CAM MENU  
If no DVR main monitor is selected:  
MENU or CAM (hold) + MENU  
MENU CAM MENU  
MENU CAM MENU  
or alternatively in both modes:  
SHIFT (hold) + PRESET > 9 5 > ENTER  
SHIFT PRESET 9 5 ENTER  
SHIFT PRESET 9 5 ENTER  
Switch between the settings:  
Enter submenus:  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
JOYSTICK  
in CAMERA ADVANCED SETUP: IRIS +  
IRIS +  
IRIS +  
Change the settings:  
JOYSTICK  
JOYSTICK  
JOYSTICK  
EXIT OSD menu / submenus:  
Menu item EXIT/RETURN > JOYSTICK  
JOYSTICK  
JOYSTICK  
in CAMERA ADVANCED SETUP: IRIS -  
IRIS -  
IRIS -  
Note: Exceptional commands are described in the OSD.  
5.2.2 Preset positions  
Up to 64 preset PTZ positions can be stored in EPTZ 100.  
Save presets  
SHIFT (hold) + POSITION  
SHIFT POSITION  
SHIFT POSITION  
> [ preset number ] > ENTER  
ENTER  
ENTER  
Camera:0001 Save to  
Position:___[1-192]  
Delete preset  
Camera:0001  
Del Position:___  
CLR (hold) + POSITION  
CLR POSITION  
CLR POSITION  
> [ preset number ] > ENTER  
ENTER  
ENTER  
Start (go to) preset  
Camera:0001 go to  
Position:___[1-192]  
POSITION > [ preset number ] > ENTER  
POSITION ENTER  
POSITION ENTER  
42  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2.3 Autopan  
The speed for autopan function is programmed in the OSD menu; the entered value for speed in EKB 500  
will be ignored at start of autopan.  
Activate A-B autopan (pan/tilt between 2 points)  
A.PAN (Pelco-P only)  
A.PAN  
A.PAN  
Alternative:  
POSITION > 99 > ENTER  
POSITION 99 ENTER  
POSITION 99 ENTER  
5.2.4 Preset tours  
EPTZ 100 provides 7 different preset tour modes. All tours are defined in the OSD setup menu.  
PATROL TOUR:  
ALL PRESET TOUR:  
GROUP 1 TOUR:  
GROUP 2 TOUR:  
GROUP 3 TOUR:  
GROUP 4 TOUR:  
TOUR SCAN:  
Preset tour with up to 16 selected presets.  
Preset tour with all available presets.  
Preset tour with presets 1~4  
Preset tour with presets 1~4  
Preset tour with presets 1~4  
Preset tour with presets 1~4  
Preset tour with defined preset GROUPS  
POSITION > [number] > ENTER  
POSITION  
POSITION  
ENTER  
ENTER  
Camera:0001 goto  
Position:__[1-192]  
Tour numbers:  
[68] TOUR SCAN  
[69] PATROL TOUR  
[70 or 98] ALL PRESET TOUR  
[71] GROUP 1 TOUR  
[72] GROUP 2 TOUR  
[73] GROUP 3 TOUR  
[74] GROUP 4 TOUR  
5.2.5 Pattern tours  
EPTZ 100 provides 4 programmed pattern tours with up to 10 minutes duration each.  
The pattern tours are started with the POSITION key.  
POSITION  
POSITION  
POSITION > [number] > ENTER  
POSITION  
POSITION  
ENTER  
ENTER  
Camera:0001 goto  
Position:__[1-192]  
Numbers:  
[75] Pattern 1  
[76] Pattern 2  
[77] Pattern 3  
[78] Pattern 4  
43  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2.6 Remote switching of EPTZ 100 output relay  
The EKB 500 keyboard provides the option to switch the output relay of EPTZ 100 On / Off.  
Switch relay ON:  
F4 > [1] > ENTER  
F4 > [1] > ENTER  
F4 > [1] > ENTER  
Switch Alarm Out: _  
[ 1-8] ON  
Alternative:  
POSITION > 82 > ENTER  
POSITION 82 ENTER  
POSITION 82 ENTER  
Switch Alarm Out: _  
[ 1-8] OFF  
Switch relay OFF:  
CLR + F4 > [1] > ENTER  
CLR + F4 > [1] > ENTER  
CLR + F4 > [1] > ENTER  
Alternative:  
POSITION > 81 > ENTER  
POSITION 81 ENTER  
POSITION 81 ENTER  
44  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 APPENDIX A: BASIC SETTINGS AT EKB 500 KEYBOARD  
The following chapter describes the basic settings in the EKB 500 keyboard to establish communication  
with speed dome cameras.  
6.1 COM PORT SETTING - RS-485 INTERFACE SETTING  
Telemetry protocol type and transmission rate are defined in this menu.  
Port : _ ( 1 or 2 )  
Input the port.  
MENU > COM PORT SETTING > ENTER  
MENU ENTER  
MENU ENTER  
Select port 1 or 2 and confirm with ENTER.  
ENTER  
ENTER  
BAUD : 9600 <  
[ ↑ ↓ ] to change  
Use the JOYSTICK  
JOYSTICK  
JOYSTICK  
Selection: 1200, 2400, 4800, 9600 Baud.  
to change the value.  
Press ENTER to confirm the setting and ESC to cancel.  
ENTER ESC  
ENTER ESC  
The next menu is used for telemetry protocol  
setting.  
Protocol : EVF-2  
[ ↑ ↓ ] to change  
Use the JOYSTICK  
JOYSTICK  
JOYSTICK  
Selection: EVF-2:  
to change the value.  
recommended protocol for optimized EKB 500 functionality  
Pelco-D  
Pelco-P  
NOTE: Baud rate and protocol type have to comply with the EPTZ 100 settings for these parameters  
(DS1 DIP switch setting).  
Press ENTER to confirm the selection and ESC to cancel.  
ENTER ESC  
ENTER ESC  
Port : 1 Changed  
[ ENT ] to save  
6.2 DEVICE SETTING > CAMERA  
Define in this menu RS-485 ID (address) and connected RS-485 port:  
MENU > DEVICE SETTING > CAMERA SETTING > ENTER  
MENU ENTER  
MENU ENTER  
Camera Name : ___  
Camera number 1 ~ 9999 (independent from RS-485 address!)  
Press Enter to confirm the setting and Esc to cancel.  
Setup of the RS-485 interface which is connected to EPTZ 100,  
port 1 or 2.  
RS485 Connected to  
Port : _ [ 0 (off) ] , 1, 2]  
Press Enter to confirm the setting and ESC to cancel.  
ESC  
ESC  
RS485 Address:  
001  
Enter the RS-485 address of the EPTZ 100.  
Video Connected to  
DVR: _ _ _ CH : _ _  
If the camera is connected to an EverFocus DVR, enter the  
DVR number and video input number.  
Enter any value if no DVR is connected  
(numeric entry compulsory).  
Camera: 0001 changed  
[ENT] to save  
Press ENTER to confirm the setting and ESC to cancel.  
ENTER ESC  
ENTER ESC  
45  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 APPENDIX B: BASIC SETTINGS AT EVERFOCUS DVR  
The following settings are required to establish RS-485 communication between DVR and speed dome:  
7.1 EDR / EDVR / EDSR SERIES (EXCEPT EDSR100, EDSR100H)  
1. CAMERA menu: enter the correct RS-485 ID (address) at the speed dome camera channel.  
2. CONTROL menu: under "RS485" :  
BAUD RATE:  
PARITY:  
set value identical to camera baud rate  
NONE  
DATA BIT:  
STOP BIT:  
PROTOCOL:  
8
1
set protocol identical to speed dome protocol  
NOTE: The RS-485 ID in CONTROL menu is not related to speed dome control. This RS-485 ID is used  
for controlling DVR by external keyboard only.  
7.2 ECOR / PARAGON SERIES  
1. CAMERA menu: enter the correct RS-485 ID (address) at the speed dome camera channel.  
2. SYSTEM > I/O CONTROL menu:  
BAUD RATE:  
PARITY:  
set value identical to camera baud rate  
NONE  
DATA BIT:  
STOP BIT:  
PROTOCOL:  
8
1
set protocol identical to speed dome protocol  
NOTE: The RS-485 ID in menu I/O CONTROL menu is not related to speed dome control. This RS-485  
ID is used for controlling DVR by external keyboard only.  
46  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 APPENDIX C: TROUBLESHOOTING  
8.1 GENERAL MALFUNCTION  
In case of drifted preset position or abnormal reaction of EPTZ 100 speed dome perform a reset of the dome, for the reset 3  
options are possible:  
Option 1:  
Option 2:  
Option 3:  
Setup menu > INITIALIZE > POWER ON RESET  
(GoTo) POSITION 80  
Power off dome for min. 5 seconds, then power on  
8.2 RECOVERING COMMUNICATION SETTINGS OF CAMERA MODULE  
If the camera communication settings in the setup menu CAMERA > ADVANCED SETUP > SPECIAL > COMM ADJ were changed  
accidentally, the communication between Speed Dome and camera module may be broken.  
Symptoms:  
Correction:  
a) Pan / Tilt works, but no zoom function  
b) OSD setup works, but no access to the submenu CAMERA > ADVANCED SETUP  
Step 1: Go in setup menu to INITIALIZE > CAMERA DEFAULT > ON and perform a camera reset. If this reset works, all settings  
from ADVANCED SETTING menu will be reset to factory defaults.  
Check access to menu ADVANCED SETUP. If the submenu opens, the communication error is fixed.  
If the problem still exists, go to STEP 2.  
Step 2: Go in setup menu to CAMERA > RESCUE MODE > set to ON  
The values for BAUD RATE and PARITY will appear.  
Change values for BAUD RATE and try with each changed value access to ADVANCED SETUP menu. Check also with  
PARITY setting ODD/EVEN.  
With correct settings access to ADVANCED SETUP is possible, the submenu appears additional  
to the camera menu on the screen:  
Switch off the CAMERA menu display by pressing IRIS + key.  
Go to > SPECIAL > COMM ADJ and set / verify following default settings:  
BAUD RATE  
UART MODE  
38400  
8-N-1  
RET PKTENABLE  
EXIT all menus.  
Restart the EPTZ-100 with power OFF / ON to finish the camera setting recovery.  
47  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EverFocus Electronics Corp.  
China Subsidiary:  
Head Office:  
Room 609, Technology Trade Building,  
Shandgdi Information Industry Base,  
Haidian District, Beijing,China  
12F, No.79 Sec. 1 Shin-Tai Wu Road,  
Hsi-Chih, Taipei, Taiwan  
USA Subsidiary:  
1801 Highland Ave. Unit A  
Duarte, CA 91010, U.S.A.  
Japan Subsidiary:  
1809 WBG MARIBU East 18F,  
2-6 Nakase.Mihama-ku.  
Chiba city 261-7118, Japan  
European Subsidiary:  
Albert-Einstein-Straße 1  
D-46446 Emmerich am Rhein, Germany  
48  
EPTZ100_ma_en_rev03.doc  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower Accessory 13224607 User Manual
Cuisinart Blender BFP 10 User Manual
Cuisinart Food Processor DLC 2007 User Manual
Danby Microwave Oven DMW101KSSDD User Manual
Delta Electronics Power Supply SIL520 User Manual
Earthquake Sound Tiller ROTOTILLERS User Manual
Elation Professional Work Light 108IP User Manual
Euro Pro Carpet Cleaner S3306HB User Manual
Fisher Price Motorized Toy Car 74260 User Manual
Garland Range G48 2G36LL User Manual