EverFocus Security Camera EHD650 User Manual

EVERFOCUS  
1/3” Wide-Dynamic  
True D/N Rugged Dome Color Camera  
Operation Instructions  
Model No. EHD650  
Please read this manual first for correct installation and operation. This manual should be retained  
for future reference. The information in this manual was current when published. The  
manufacturer reserves the right to revise and improve its products. All specifications are therefore  
subject to change without notice.  
PRECAUTIONS  
1. Do not install the camera near electric or magnetic fields.  
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,  
audio speakers since the magnetic fields generate from above devices will distort the video  
image.  
2. Never disassemble the camera nor put impurities in it.  
Disassembly or impurities may result in trouble or fire.  
3. Never face the camera toward the sun.  
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.  
4. Keep the power cord away from wet and never touch the power cord with wet hands.  
Touching the wet power cord with hands or touching the power cord with wet hands may  
result in electric shock.  
5. Never install the camera in areas exposed to water, oil or gas.  
Water, oil or gas may result in failure, electric shock or file.  
6. Cleaning  
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from  
the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor  
and the camera lens.  
7. Do not operate the camera beyond the specified temperature, humidity or power source  
ratings.  
Use the camera at temperatures within -40~ 50(-40~122) and humidity between  
20%~80%. The input power source is 24VAC .  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. PRODUCT OVERVIEW  
The most technically advanced EHD650 is the newest vandal-resistant Color  
Rugged Dome Camera from EverFocus Electronics. The Color Rugged Dome  
Camera can withstand a blow from a 10-pound sledgehammer and has a built-in  
heater that allows for operation in low temperatures. It is perfect for all  
high-profile crime-prone applications such as building, entrances, retail stores, and  
shopping malls. The EHD650 is unquestionably one of the world's toughest  
cameras and is your best choice for vandal resistance.  
1.1 Main Features  
1/3” Color Digital Pixel System (DPS) sensor  
Each pixel is processed independently to get clear and usable images  
High resolution: Over 480 horizontal TVL  
Superior Wide Dynamic Image Quality  
Film-like colors are described under various light conditions even in high  
dynamic range scenes. Dynamic Range is greater than 120dB.(max)  
True Day Night function:  
True day/night by moving OLPF and glass. Converts to B/W mode when  
light is low  
OSD function control  
Vandal proof  
Vari-focal lens for auto iris control  
Line Lock mode  
Polycarbonate shell withstand the impact of 10 pounds sledgehammer, smoke  
color or clear as option  
Aluminum die-casting base, smoke color or clear as option  
Unique security screw locked  
Operating temperature -40~ 50(-40~122)  
Heater triggered when temperature less than 10(50)  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2 Package Contents  
z
z
Camera Unit x 1  
Mounting Accessory includes:  
-
-
-
Screws x 4  
Expanding Screws x 4  
Wrench x 1  
z
Weather-proof Conduit x 1  
z
z
Extension Power Cable and Video cable x 1  
Extension Power Cable x 1  
z
z
Desiccant Pack x 1  
Manual x 1  
OPTIONAL ACCESSORIES  
z
Wall Mount Bracket (BA-EHD)  
z
EN220 5.6-inch LCD Test Monitor  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.3 Specifications  
Pickup Device  
Video Format  
1/3'' DPS Wide Dynamic range sensor  
NTSC or PAL  
NTSC: 525 TV lines, 60 fields/sec  
PAL: 625 TV lines, 50 fields/sec.  
720(H) X 540(V)  
Scanning System  
Picture Elements  
Horizontal Resolution  
Sensitivity  
480TVL  
0.08Lux/F=1.2 (DSS x 32)  
Over 48dB  
S/N Ratio  
Electronic Shutter  
1/50(1/60)~1/100,000  
Vari-focal lens, Auto Iris  
f=2.9~10mm  
Lens Type  
f=9~22mm  
*Lens models and availability vary in different  
regions  
OSD Menu  
Yes  
Back Light Comp.  
Auto Gain Control  
Auto White Balance  
Flickerless  
Yes  
Yes  
Yes  
Yes  
Slow Shutter  
Up to 32x (2, 4, 8, 16, 32)  
95dB typical, 120dB max  
0.45  
Dynamic Range  
Gamma Correction  
Video Output  
Sync. Mode  
BNC 1.0Vp-p , 75ohm  
Line Lock/Internal Sync  
IP66  
Weatherproof  
Vandal Resistant  
Heater  
Yes  
Yes, built-in  
Power Source  
24VAC  
24VAC: 6VA max. (heater OFF)  
24VAC: 20.5W max. (heater ON)  
130mm(W) x 98.9mm(H) x 130mm(D);  
5.1"(W) x 3.9"(H) x 5.1"(D)  
1 kg ; 2.2 lbs  
Power Consumption  
Dimensions  
Weight  
Operating Temperature  
Certifications  
-40°C~50°C ; -40°F~122°F (20%~80% Humidity)  
FCC/CE  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.4 Dimensions  
a.  
b.  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.5 Hardware Overview  
Side conduit hole  
Back conduit hole  
Conduit plug setscrew  
Mounting Setscrew  
Mounting Setscrew  
Camera Module  
Mounting Setscrew  
Mounting Setscrew  
OSD mini-joystick Controller  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. INSTALLATION  
This section covers simple steps and detail installation. Please follow instruction for  
preventing any unnecessary damage.  
Simple Steps:  
1. Open camera cover.  
2. Rotate camera if install on ceiling  
3. Drill holes on wall/ceiling. Mount cameras.  
4. Connect power and video.  
5. Optional connect to EN220 Test Monitor for field testing (monitor is not  
included).  
6. Adjust lens and camera position.  
7. Adjust camera setting by using the OSD controller.  
8. Put in DESICCANT PACK and close the camera cover for avoiding moisture in  
the camera.  
Detail Installation Steps:  
1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure  
1). Please pay attention not to damage the lens.  
Figure 1  
2. Remove the camera  
Vari-Focal Lens  
Heater  
Locking Screws  
Figure 2  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To remove the camera, first unplug the wire connection on the back of the camera.  
Then loosen the 2 locking screws on the camera base, push the camera base to the right  
(toward heater direction, as shown in Figure 2), remove the camera from the mounting  
base. Reinstall the camera and the cable while the base mounting is completed.  
2.1 Instruction for rotating the camera mounting  
a. Please unscrew fixing screws that hold the camera module.  
Figure 3-1  
b. Remove the camera  
Figure 3-2  
c. Aim “ Ceiling” Mark to “S” mark on camera lead frame. See figure  
3-3.  
S” mark.  
Figure 3-3  
- 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
d. Tighten fixing screws and finished  
Figure 3-4  
2.2 Mounting Cameras on the Ceiling/Wall  
a. Mount the base to the wall or ceiling, fix the base by the 4 screws in the  
accessory pack.(see dimension b for drilling dimension). This dome is  
weighted 1.7kg, please make sure if the mounting is strengthened enough to  
support it, if not, please reinforce the mounting according to the  
environment. See figure 4.  
Back conduit hole  
Mounting Setscrew  
Mounting Setscrew  
Mounting Setscrew  
Mounting Setscrew  
Figure 4  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b. Take off cable conduit if you need to wire cable through side conduit hole. The  
camera comes with a conduit plug pre-installed in the PF 1/2 conduit hole on the side.  
The conduit plug can be removed and installed in the back conduit hole (as shown in  
Figure 5)  
Back conduit hole  
Caution: When used in the environment with  
high humidity, apply an appropriate gasket or  
sealant around the conduit connection.  
Conduit plug  
Side conduit hole (PF1/2)  
Figure 5  
2.3 Conduit cable and Connect Power and Video  
a. If you want to wire cable through side conduit hole. Find the water-proof  
conduit in the bag and wire power connection cable through it.  
Figure 6-1  
Figure 6-2  
- 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b. Connect cable conduit to the conduit hole and make it tight.  
Figure 6-3  
c. Connect the power supply cable (24VAC), video output to the proper  
connectors. The extension power has 4 colors for Power +(red), - (white)  
and Video(yellow), GND(black). Please match the colors with  
terminal board shown as Figure 7. Yellow to yellow, Black to Black,  
White to white, red to red. Wrong connection will damage the camera!!  
Figure 7  
d. Connect 24VAC regulated power source to the camera. Please use  
power extension for connecting to it if the power adapter cable is not  
long enough.  
- 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
White (+)  
Black (-)  
e. Optional connect to Alarm(Please see figure 8 for terminal functions)  
Terminal Board  
Figure 8  
Micro Switch for Alarm trigger  
Power In (+)  
Power In (-)  
GND  
Alarm COM  
Video  
Alarm NO  
V. Phase Adjustment VR  
Alarm NC  
Figure 9  
f. V. Phase adjustment screw is located on the termination board. The vertical phase  
may require adjustment to synchronize the vertical phase of the camera with other  
camera in the system when it is to be used in the line-lock sync mode. Make the  
adjustment when the vertical phase of the camera does not match with other cameras.  
- 13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.4 Adjust Lens zoom and focus and View  
a. Adjust Lens zoom and focus(for vari-focal lens models)  
Zoom  
Focus  
Figure 10  
b. Adjust view angle  
The camera can be rotated 360° horizontally, 140° vertically and 60°  
3’rd axis view angles (as shown in Figure 11). Adjust the proper  
camera view angle as needed.  
Lens fixing Screws  
140°  
360  
60°  
Figure 11  
- 14 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. HOW TO CONTROL OSD MENU  
3.1 Where is OSD Controller  
Detach the mini-joystick on the side of camera housing. See the following picture.  
OSD mini-joystick controller  
is attached here.  
3.2 General Operation Instruction  
MAIN MENU  
DC..  
SETUP ID..  
LENS  
Set button  
WDR..  
The Cursor Buttons & the SET  
Button  
WB CONTROL  
AGC  
ATW  
ON  
LOW LIGHT  
SYNC ..  
SLOW-SH..  
DAY/NIGHT  
EXIT MENU  
- 15 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I.  
Press the SET button for 3 seconds  
The menu screen will appear on the monitor as the block shown above.  
II.  
Using the cursor button  
Use the cursor button c or d to move the cursor up or down. Use the  
cursor button e or f to adjust the mode or parameter of settings.  
III.  
Switch to sub-menu screens  
When the item with sub-menu is selected, press the SET button to switch  
to the sub-menu for further settings. Please refer to the figure below.  
MAIN MENU  
>SETUP ID..  
LENS  
DC..  
CAMERA ID MENU  
> DISPLAY ID ON  
CAMERA ID:  
WDR..  
WB CONTROL  
AGC  
ATW  
ON  
ID POSITION UP-LEFT  
PREVIOUS PAGE.  
LOW LIGHT  
SYNC.  
SLOW-SH..  
DAY/NIGHT  
EXIT MENU  
NOTE:  
For those selected items with “.. ” sign in the end, they have the sub-menu for further  
settings.  
IV.  
V.  
Return to previous page  
Press the SET button to return to previous page.  
Close the menu screen  
To close the menu screen, use the cursor button to select EXIT and press  
the SET button.  
- 16 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. MAIN MENU  
4.1 Setup ID  
Camera Menu: Display ID/Camera ID/ID position  
MAIN MENU  
>SETUP ID..  
LENS  
DC..  
CAMERA ID MENU  
> DISPLAY ID ON  
CAMERA ID:  
WDR..  
WB CONTROL  
AGC  
ATW  
ON  
ID POSITION UP-LEFT  
PREVIOUS PAGE.  
LOW LIGHT  
SYNC..  
SLOW-SH..  
DAY/NIGHT  
EXIT MENU  
DISPLAY ID: ON/OFF.  
The camera ID can be displayed on the screen by setting “ON”.  
CAMERA ID: When “ON” is selected, user can set the Camera ID up to 12  
characters. Please refer to the table below for detailed character patterns. Use the  
cursor button e or f to locate characters (characters will display in the same  
order as shown in table), press the SET button to choose the character. Use the  
cursor button f to move to the next character for setting.  
Once the characters of camera ID are all selected, press the SET button for 1 sec  
to close the menu and the Camera ID will show on the screen as the figure below.  
Ex: CAMERA ID:  
101  
EverFocus  
- 17 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ID POSITION: UP-LEFT / UP-CENTER / UP-RIGHT / DWN-LEFT /  
DWN-CENTER / DWN-RIGHT  
There are four positions can be chosen to show the CAMERA ID on the screen.  
Choose an ID position that will not cover the import/critical part of images.  
PREVIOUS PAGE: Press SET button and you can return to the previous page.  
4.2 Lens  
LENS-DC:  
DC LEVEL: The brightness of the screen can be adjusted on DC mode in DC  
LEVEL. The level can be adjusted MIN –42 to 20 MAX.  
PREVIOUS PAGE: Press SET button and you can return to the previous page.  
MAIN MENU  
SETUP ID..  
>LENS  
DC..  
DC LEVEL MENU  
>DC LEVEL ++++++++++++  
MIN -18 MAX  
PREVIOUS PAGE.  
WDR..  
WB CONTROL  
AGC  
ATW  
ON  
LOW LIGHT  
SYNC ..  
SLOW-SH..  
DAY/NIGHT  
EXIT MENU  
- 18 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.3 WDR (Wide Dynamic Range)  
MAIN MENU  
SETUP ID..  
WDR MENU  
>EXPO BIAS ++++++++++++  
LENS  
DC..  
MIN  
0
MAX  
>WDR..  
WDR BIAS  
++++++++++++  
MIN -2 MAX  
WB CONTROL  
AGC  
ATW  
ON  
PREVIOUS PAGE.  
LOW LIGHT  
SYNC ..  
SLOW-SH..  
DAY/NIGHT  
EXIT MENU  
EXPO BIAS: MIN -18 ~ 18 MAX  
Select exposure bias from min. -18 to max. 18.  
WDR BIAS: MIN –20 ~ 20 MAX  
The camera offers outstanding Wide-Dynamic Range (WDR). User can manually  
set the Dynamic Range by moving the tag along -20 to 20 level bar. When  
contrast of lighting condition is larger, increase the number, or decrease the  
number towards “0” if the contrast of lighting condition is smaller.  
PREVIOUS PAGE: Press SET button and you can return to the previous page.  
4.4 WB Control  
ATW/AWB/MANUAL  
WB CONTROL: AWB (Auto White Balance).  
PUSH AWB CONFIRM: This saves the current Auto White Balance setting. If  
lighting environment ever changes, you can change this AWB again.  
CANCEL: Quit this menu without saving AWB.  
MAIN MENU  
SETUP ID..  
PUSH AWB CONFIRM  
LENS  
DC..  
>Save AWB.  
CANCEL  
WDR..  
>WB CONTROL AWB  
** WARNING**  
AGC  
ON  
Current AWB settings  
will be written to ROM  
LOW LIGHT  
SYNC ..  
SLOW-SH..  
DAY/NIGHT  
EXIT MENU  
- 19 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WB CONTROL: ATW  
ATW (Auto Tracking White Balance): This mode can be used within the color  
temperature range from 2,500°K to 9,500°K (eg, fluorescent light, outdoor,  
sodium vapor lamp or inside tunnels).  
WB CONTROL: MANUAL  
MAIN MENU  
SETUP ID..  
LENS  
DC..  
KELVIN  
++++++++++++  
2500 4500 9500  
PREVIOUS PAGE.  
WDR..  
>VALUE  
>WB CONTROL  
AGC  
MANUAL  
ON  
LOW LIGHT  
SYNC ..  
SLOW-SH..  
DAY/NIGHT  
EXIT MENU  
KELVIN: value ranges from 2500 to 9500. You could adjust White Balance  
manually according to environment’s color temperature.  
PREVIOUS PAGE: Press SET button and you can return to the previous page.  
4. 5 AGC  
ON/OFF  
AGC: ON. By selecting ON, you can activate automatic gain control feature.  
MAIN MENU  
SETUP ID..  
LENS  
DC..  
AGC MENU  
>SET LEVEL ++++++++++++  
MIN 32 MAX  
PREVIOUS PAGE.  
WDR..  
WB CONTROL  
>AGC  
MANUAL  
ON  
LOW LIGHT  
SYNC ..  
SLOW-SH..  
DAY/NIGHT  
EXIT MENU  
AGC MENU: SET LEVEL from MIN 0 to MAX 36.  
PREVIOUS PAGE: Press SET button and you can return to the previous page.  
AGC:OFF. It is a fixed gain adjustment.  
- 20 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAIN MENU  
DC..  
SETUP ID..  
LENS  
MANUAL GAIN MENU  
>SET LEVEL ++++++++++++  
WDR..  
WB CONTROL  
>AGC  
MANUAL  
OFF  
MIN  
0
MAX  
PREVIOUS PAGE.  
LOW LIGHT  
SYNC ..  
SLOW-SH..  
DAY/NIGHT  
EXIT MENU  
AGC MENU: SET LEVEL from MIN –34 to MAX 43. The more the level of gain  
increases, the brighter the screen and the level of noise increases as well.  
PREVIOUS PAGE: Press SET button and you can return to the previous page.  
4.6 Low Light  
SLOW SH../B&W SS/GAIN  
MAIN MENU  
SETUP ID..  
LENS  
DC..  
SLOW SHUTTER  
WDR..  
>START AGC  
++++++++++++  
WB CONTROL  
AGC  
MANUAL  
OFF  
MIN 42 MAX  
x2  
MAX FIELD  
>LOW LIGHT  
SYNC ..  
SLOW-SH..  
PREVIOUS PAGE.  
DAY/NIGHT  
EXIT MENU  
LOW LIGHT: SLOW SH..  
SLOW SHUTTER: Select MAX FIELD: X2/X4/X8/X16/X32  
PREVIOUS PAGE: Press SET button and you can return to the previous page.  
LOW LIGHT: B&W SS. Black and White Slow Shutter is fixed, not adjustable.  
Shutter speed is fixed at X32.  
LOW LIGHT: GAIN. Images remain in color condition. This option is not  
adjustable.  
- 21 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.7 SYNC  
MAIN MENU  
DC..  
SETUP ID..  
LENS  
SYNC MENU  
>SYNC INTERNAL  
PREVIOUS PAGE.  
WDR..  
WB CONTROL  
MANUAL  
OFF..  
AGC  
LOW LIGHT  
>SYNC ..  
SLOW-SH..  
DAY/NIGHT  
EXIT MENU.  
Auto..  
SYNC: INTERNAL/LINELOCK  
SYNC-INTERNAL  
Internal synchronization.  
SYNC – LINELOCK  
Phase adjustment may be necessary in multiple camera installations to prevent  
picture roll.  
LINELOCK MENU  
>V PHASE ++++++++++++  
519 620  
SYNC MENU  
>SYNC LINELOCK  
0
PREVIOUS PAGE.  
PREVIOUS PAGE.  
V.PHASE: 0~620  
- 22 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.8 Day/Night  
Auto/COLOR/B/W  
MAIN MENU  
SETUP ID..  
LENS  
DC..  
DAY/NIGHT LEVEL SETUP  
WDR..  
> C->B 31 20 ++++++++++++35  
WB CONTROL  
AGC  
MANUAL  
OFF  
B->C  
5
0 ++++++++++++10  
PREVIOUS PAGE.  
LOW LIGHT  
SYNC ..  
SLOW-SH..  
>DAY/NIGHT  
EXIT MENU..  
Auto..  
DAY/NIGHT: Auto. For automatic switch between day and night mode.  
C->B 20~35  
B->C 0~10  
PREVIOUS PAGE: Press SET button and you can return to the previous page.  
DAY/NIGHT: Color. To keep color image at all time.  
DAY/NIGHT: B/W. To keep Black and White image at all time.  
4.9 Exit Menu  
MAIN MENU  
SAVE RESTORE EXIT  
>EXIT NO CHANGE.  
SETUP ID..  
LENS  
DC..  
SAVE NEW AND EXIT.  
WDR..  
RESTORE FACTORY SETTINGS.  
WB CONTROL  
AGC  
MANUAL  
OFF  
SW REV:  
FW REV:  
3.4  
2.5-4.0.42  
LOW LIGHT  
SYNC ..  
SLOW-SH..  
PREVIOUS PAGE.  
DAY/NIGHT  
>EXIT MENU..  
Auto..  
EXIT NO CHANGE: press enter and you can exit this page without saving the  
change you have made.  
SAVE NEW AND EXIT: press enter to exit and the changes you have made will  
be saved.  
- 23 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAVE RESTORE EXIT: RESTORE FACTORY SETTING  
SAVE RESTORE EXIT  
CONFIRM FACTORY SETTINGS  
EXIT NO CHANGE.  
>ARE YOU SURE?  
PREVIOUS PAGE.  
NO.  
SAVE NEW AND EXIT.  
>RESTORE FACTORY SETTINGS.  
SW REV:  
FW REV:  
3.4  
2.5-4.0.42  
PREVIOUS PAGE.  
RESTORE FACTORY SETTING: you will be asked “Are you sure?” before  
you restore all settings to factory values. Select “YES” to confirm.  
SW REV: indicating software version.  
FW REV.: indicating firmware version.  
PREVIOUS PAGE: Press SET button and you can return to the previous page.  
- 24 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EverFocus Electronics Corp.  
Europe Office:  
Head Office:  
Albert-Einstein-Strasse 1  
D-46446 Emmerich, Germany  
TEL: +49(0)-2822-9394-0  
FAX: +49(0)-2822-9394-95  
12F, No.79 Sec. 1 Shin-Tai Wu Road,  
Hsi-Chih, Taipei, Taiwan  
TEL: +886-2-26982334  
FAX: +886-2-26982380  
China Office:  
USA L.A. Office:  
Room B-05D-1, KESHI PLAZA, Shangdi  
Information Industry Base,  
Haidian District, Beijing China  
100085  
TEL: +86-10-62973336/37/38/39  
FAX: +86-10-62971423  
1801 Highland Ave. Unit A  
Duarte, CA 91010, U.S.A.  
TEL: +1-626-844-8888  
FAX: +1-626-844-8838  
USA N.Y. Office:  
415 Oser Avenue Unit S  
Hauppauge, NY 11788  
TEL: 631-436-5070  
FAX: 631-436-5027  
Japan Office:  
1809 WBG MARIBU East 18F,  
2-6 Nakase.Mihama-ku.  
Chiba city 261-7118, Japan  
TEL: +81-43-212-8188  
FAX: +81-43-297-0081  
Your EverFocus product is designed and  
manufactured with high quality materials and  
components which can be recycled and  
reused.  
Ihr EverFocus Produkt wurde entwickelt und  
hergestellt mit qualitativ hochwertigen  
Materialien und Komponenten, die recycelt  
und wieder verwendet werden können.  
This symbol means that electrical and  
electronic equipment, at their end-of-life,  
should be disposed of separately from your  
household waste.  
Dieses Symbol bedeutet, dass elektrische und  
elektronische  
Geräte  
am  
Ende  
ihrer  
Nutzungsdauer vom Hausmüll getrennt  
entsorgt werden sollen.  
Bitte entsorgen Sie dieses Gerät bei Ihrer  
örtlichen kommunalen Sammelstelle oder im  
Recycling Centre.  
Helfen Sie uns bitte, die Umwelt zu erhalten, in  
der wir leben!  
Please, dispose of this equipment at your  
local community waste collection/recycling  
centre.  
In the European Union there are separate  
collection systems for used electrical and  
electronic product.  
Please, help us to conserve the environment  
we live in!  
P/N: MEHDG01010_Ver.C  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cooper Lighting Marine Safety Devices ELPS502 User Manual
Craftsman Garage Door Opener 13953325SRT User Manual
Cuisinart Kitchen Grill WM SW2N User Manual
Curtis Clock Radio CR1353 User Manual
Dynacord Stereo Amplifier DSA 8405 User Manual
Escient Car Video System M51003 02A7 User Manual
Fundex Games Games Old Maid User Manual
GBC Laminator 3064WF User Manual
GE Air Cleaner AFHC32AM User Manual
GE Ventilation Hood JN327 User Manual