Electro Voice Speaker System HP420 User Manual

HP420  
Constant-Directivity  
Horn  
General Product Description  
The Electro-Voice® model HP420 is a wide-range,  
flat-front, high-frequency, constant-directivity horn. The  
horizontal angle is controlled over a frequency range  
of 650 Hz to 20 kHz and the vertical angle is controlled  
from 2.2 kHz to 20 kHz, both with unusual precision  
and adherence to the intended angle. Furthermore,  
excellent loading is maintained to a low frequency of  
500 Hz.  
The flat-front design makes the HP420 suitable for all  
modern boxed and clustered systems.A special vaned  
waveguide throat detail gives the HP420 unusually good  
high-frequency control, vertically, when compared to  
similar 2-inch-throat horn designs.  
Architects’ and Engineers’ Specifications  
throat section shall be constructed of die-cast zinc and  
shall be integrally laminated into the fiberglass portion  
of the horn.  
The horn shall be of the constant-directivity type.It shall  
produce a horizontal beamwidth (6 dB-down angle) of  
40 degrees, deviating no more that 20 degrees from  
this angle over the frequency range 650 to 20,000 Hz.  
It shall produce a vertical beamwidth of 20 degrees,  
deviating no more than 10 degrees from this angle over  
the frequency range 2,200 to 20,000 Hz. In addition, it  
shall provide useful acoustic loading at all frequencies  
above 500 Hz.  
The horn shall possess a throat of 4.92-cm (1.94in.)  
diameter and its flange shall be provided with four ¼-20  
clearance bolt holes on a 10.2 cm (4.0 in.) circle for the  
mounting of the compression driver. The horn shall be  
36.7 cm (14.4 in.) high, 61.0 cm (24.0 in.) wide, and  
74.9 cm (29.5 in.) long. It shall weigh no more than 5.9  
kg (13.0 lb).  
The horn shall be of hybrid fiberglass-and-zinc  
construction. The driver-mounting flange and initial  
The horn shall be the Electro-Voice model HP420  
constant-directivity horn.  
Specifications:  
Construction:  
The following specifications are in accordance with or  
exceed the AES Recommended Practice for  
Specification of Loudspeaker Components Used in  
Professional Audio and Sound Reinforcement  
(AES2-1984; ANSI S4.26-1984).  
Polyester resin and glass-fiber laminate integrally  
molded to a die-cast zinc throat section. This hybrid  
construction assures a rigid driver mount, accurate,  
loss-free throat-wave transmission and low total weight  
compared to horns of similar size.  
Horizontal Beamwidth:  
Mechanical Connection of Driver:  
40° (+20°, -10°) (-6 dB 650 Hz to 20 kHz)  
Vertical Beamwidth:  
Bolt on; standard 2" diameter throat, 5" diameter  
mounting flange and four clearance holes for ¼" bolts  
on a 4" diameter bolt circle.  
20° (+10°, -10°) (-6 dB, 2.2 kHz to 20 kHz)  
Directivity Factor Rθ(Q):  
Recommended Driver:  
DH1A or DH2A  
Weight:  
47.5 (average 1.25 kHz to 20 kHz)  
Directivity Index Di:  
16.8 dB  
5.9 kg (13.0 lb)  
10 log Rθ, (average 1.25 kHz to 20 kHz)  
Lowest Recommended Crossover Frequency:  
500 Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Crate Amplifiers Stereo Amplifier G200C User Manual
Cuisinart Toaster CPT 60M Series User Manual
Electro Voice Microphone PL95 User Manual
Estate Range W10017740 User Manual
Fellowes Paper Shredder 3250C User Manual
Fisher Paykel Oven BI602CTE User Manual
Fisher Price Motorized Toy Car W2604 User Manual
Fujitsu Air Conditioner AOVG09LLCA User Manual
Garland Cooktop M48 23R User Manual
Global Machinery Company Chainsaw PCH37 User Manual