Edelbrock Water Pump 8882 User Manual

VICTOR SERIES ALUMINUM WATER PUMPS  
Reverse Rotation for Small-block Chevrolet V8s & 90° V6s  
CATALOG #8882 (unpolished)  
CATALOG #8892 (polished)  
GENERAL INSTRUCTIONS  
PLEASE study these instructions carefully before installing your new water pump. If you have any questions or  
problems, do not hesitate to contact our Technical Hotline at: (310) 782-2900.  
• DESCRIPTION  
This Edelbrock aluminum water pump is a reverse rotation heavy duty water pump for both street and racing  
applications. It is externally the same as original equipment pumps designed for the applications listed below,  
but MUST BE USED WITH REVERSE ROTATION SERPENTINE BELT PULLEYS. This pump is ideal  
for street rods with aftermarket serpentine belt pulleys. It offers weight savings along with increased durability  
and cooling potential. An additional feature is the threaded tab for a cam stop that can be used to pre-load the  
front cover and limit camshaft forward thrust.  
• APPLICATIONS  
#8882 is a short leg pump for 1955-’68 passenger cars, light duty trucks, and 1969-’70 Corvettes with  
aftermarket serpentine belt pulleys (reverse rotation). Polished Aluminum Water Pump #8892 fits the same  
applications as #8882.  
• ACCESSORIES  
Use #8830 Spacer Kit for short style pumps to clear competition camshaft gear drives and belt drives. Kit  
includes 1/2" thick water pump and crank pulley spacers.  
• INSTALLATION  
Installation is the same as for original equipment  
water pumps, except that aftermarket reverse rotation  
serpentine belt pulleys MUST be used. Consult ser-  
vice manual for specific procedures, if necessary.  
CAUTION: Be sure that fan bolts don't protrude  
through the hub so far that they hit the water pump  
housing.  
NOTE: Removal of backing plate is not recommend-  
ed, as there are no user serviceable parts in the water  
pump. If backing plate is removed, use no sealer on  
O-ring equipped models, and use conventional gasket  
sealer (not RTV silicone) on gasketed models.  
• SPECIFICATIONS  
Dimension from block surface to hub:  
#8882/#8892  
— 5-5/8"  
PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part  
#____” space.  
THANK YOU.  
©1998 Edelbrock Corp.  
Rev. 3/98  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Coleman Tent 2000001585 User Manual
Compaq Personal Computer EX Series User Manual
Compaq Personal Computer SR1602HM User Manual
Craftsman Snow Blower 917881064 User Manual
Delta Electronics Power Supply HMU1356S User Manual
EdgeStar Air Conditioner AP12000S 1 User Manual
Fellowes Binding Machine 403054 User Manual
Fostex Computer Drive EX12 User Manual
Gitzo Camcorder Accessories G1411 User Manual
Global Machinery Company Lawn Mower 1700W User Manual