EarthQuake Tiller 3365 User Manual

OPERATING INSTRUCTIONS &

PARTS EXPLOSIONS

FRONT TINE ROTOTILLERS

Model 3365

Model R3355H

5.5 HP Honda

Briggs & Stratton

5.50 ft-lbs Gross Torque

Model 3365B

Briggs & Stratton

3365PSCE

Briggs & Stratton

8.5 ft-lbs Gross Torque

Model 3365PS

Briggs & Stratton

6.50 ft-lbs Gross Torque

Model 3365CE

Briggs & Stratton

6.50 ft-lbs Gross Torque

Model 3365KPS

Kohler

7.25 ft-lbs Gross Torque

Model 3365K

Kohler

7.25 ft-lbs Gross Torque Vert.

ARDI SA M

.com

OMFT

Rev. 04/26/10

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

INTROdUCTION

ThANkYOU . . .

for purchasing an Earthquake® forward rotating front tine rototiller

from Ardisam, Inc. We have worked to ensure that this front tine

rototiller meets high standards for usability and durability. With

proper care, your rototiller will provide many years of service.

Please take the time to read this manual carefully to learn how to

correctly operate and maintain your rototiller. This manual should

be considered a permanent part of your rototiller. Due to continuous

efforts to perfect our product, certain procedures and speciﬁcations

are subject to change without notice. Congratulations on your

investment in quality.

CONTENTS

Warranty Registration...................................................................... 3

Safety .............................................................................................. 4

Unpacking and Assembly................................................................ 7

Features .......................................................................................... 8

Controls ........................................................................................... 9

Operation....................................................................................... 10

Maintenance & Storage................................................................. 12

Troubleshooting & Repair .............................................................. 16

Parts Explosions............................................................................ 17

REGISTRATION

Record your model number and serial number in the space provided for

easy reference. Fill out and mail the registration card located in your

parts packet. Warranty is valid only if your completed registration card

is received by Ardisam, Inc., within two weeks of the purchase date.

Model Number

Serial Number

Engine Serial Number

Date of Purchase

Place of Purchase

800-ꢀ45-6007

Page ꢀ

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

SAFETY

dANGER

OWNER’S RESPONSIBILITY

Accurate assembly and safe and effective use of the rototiller is the

owner’s responsibility.

dANGER INdICATES A SERIOUS INjURY OR FA-

TALITY WILL RESULT IF ThE SAFETY INSTRUC-

TIONS ThAT FOLLOW ThIS SIGNAL WORd ARE

NOT OBEYEd.

•

Read and follow all safety instructions.

Carefully follow all assembly instructions.

Maintain the tiller according to directions and schedule included

in this Earthquake operator’s manual.

WARNING

WARNING INdICATES A SERIOUS INjURY OR FA-

TALITY COULd RESULT IF ThE SAFETY INSTRUC-

TIONS ThAT FOLLOW ThIS SIGNAL WORd ARE

NOT OBEYEd.

•

Ensure that anyone who uses the tiller is familiar with all

controls and safety precautions.

SPECIAL MESSAGES

Your manual contains special messages to bring attention to potential

safety concerns, machine damage as well as helpful operating and

servicing information. Please read all the information carefully to

avoid injury and machine damage.

CAUTION

CAUTION INdICATES YOU CAN OR YOUR EQUIP-

MENT CAN BE hURT IF ThE SAFETY INSTRUC-

TIONS ThAT FOLLOW ThIS SIGNAL WORd ARE

NOT OBEYEd.

NOTE: General information is given throughout the manual

that may help the operator in the operation or service of the

machine.

IMPORTANT SAFETY PRECAUTIONS

Please read this section carefully. Operate the tiller according to the

safety instructions and recommendations outlined here and inserted

throughout the text. Anyone who uses this tiller must read the instruc-

tions and be familiar with the controls. Your tiller is equipped with a

safety device that enables you to stop the wheels and tines quickly

in an emergency. Learn how the drive safety control lever operates

and how to control the tiller at all times.

IMPORTANT

IMPORTANT INdICATES hELPFUL INFORMATION

FOR PROPER ASSEMBLY, OPERATION, OR

MAINTENANCE OFYOUR EQUIPMENT.

This symbol points out important safety instructions

which if not followed could endanger your personal

safety. Read and follow all instructions in this manual

before attempting to operate this equipment.

WARNING

YOUMUSTREAd,UNdERSTANdANdCOMPLYWITh

ALL SAFETY ANd OPERATING INSTRUCTIONS IN

ThIS MANUAL BEFORE ATTEMPTING TO SET UP

ANd OPERATEYOUR ROTOTILLER.

•

Do not allow children to operate this rototiller. Keep small children away

from the area being tilled. Do not allow adults to operate the tiller without

proper instruction.

FAILURE TO COMPLY WITh ALL SAFETY ANd

OPERATING INSTRUCTIONS CAN RESULT IN LOSS

OF MAChINE CONTROL, SERIOUS PERSONAL

INjURY TOYOU ANd/OR BYSTANdERS, ANd RISk

OF EQUIPMENT ANd PROPERTY dAMAGE. ThE

TRIANGLE IN ThE TExT SIGNIFIES IMPORTANT

CAUTIONS OR WARNINGS WhICh MUST BE

FOLLOWEd.

PREPARATION

•

Dress appropriately when operating the tiller. Always wear sturdy

footwear.Never wear sandals, sneakers or open shoes, and never

operate the tiller with bare feet. Do not wear loose clothing that

might get caught in moving parts.

CALIFORNIA PROPOSITION 65 WARNING

•

Carefully inspect the area to be tilled and remove all foreign objects.

Do not till above underground water lines, gas lines, electric cables,

or pipes.Do not operate the tiller in soil with large rocks and foreign

objects which can damage the equipment.

ENGINE ExhAUST FROM ThIS PROdUCT

CONTAINS ChEMICALS kNOWN TO ThE STATE

OF CALIFORNIA TO CAUSE CANCER, BIRTh

dEFECTS, OR OThER REPROdUCTIvE hARM.

•

Disengage all clutches and leave all control levers in the neutral

position before starting the engine.

Handle fuel with care; it is highly ﬂammable.

a. Use an approved fuel container.

b. Never add fuel to a running engine or hot engine.

Page 4

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

c. Fill fuel tank outdoors with extreme care. Never ﬁll fuel

tank indoors.

IMPORTANT

d. Replace gasoline cap securely and clean up spilled fuel

before restarting.

ThE RIGhT ANd LEFT SIdES OFYOUR

ROTOTILLERAREdETERMINEdFROM

ThE OPERATING POSITION AS YOU

FACE ThE dIRECTION OF FORWARd

TRAvEL.

•

Never attempt to make any adjustments while the engine is

running.

ENGINE IS ShIPPEd FROM FACTORY

WIThOUT OIL.YOU MUST Add ENGINE

OIL BEFORE STARTING ENGINE.

OPERATION

• Do not operate the tiller under the inﬂuence of alcohol or

drugs.

• Never operate the tiller without guards, covers, and hoods in

place.

MAINTENANCE ANd STORAGE

• Keep machine, attachments and accessories in safe working

condition.

• Keep hands, feet, and clothing away from rotating parts.Keep

clear of tiller tines at all times.

• Tines rotate when tiller is engaged;tines rotate when the drive

safety control lever is pulled down. Releasing the drive safety

control lever to neutral stops the tines.

• Check shear bolts, engine mounting bolts and other bolts at

frequent intervals for proper tightness to be sure the equipment

is in safe working condition.

• Use extreme caution when operating on or crossing gravel

drives, walks, or roads. Stay alert for hidden hazards or

trafﬁc.

• To prevent accidental starting, always disconnect and secure

the spark plug wire from the spark plug before performing tiller

maintenance.

• After striking a foreign object, stop the engine, remove the

wire from the spark plug, thoroughly inspect the tiller for

any damage, and repair the damage before restarting and

operating the tiller.

• Never run the engine indoors. Exhaust fumes are deadly.

• Always allow mufﬂer to cool before ﬁlling the fuel tank.

• Never store equipment with gasoline in the tank inside a closed

building where fumes may reach an open ﬂame or spark.Allow

the engine to cool before storing in any building.

• IF vEGETATION CLOGS ThE TINES, STOP ThE ENGINE

ANd dISCONNECT ThE SPARk PLUG WIRE before

removing vegetation by hand.

• Always refer to the operator’s guide instructions for important

details if the tiller is to be stored for an extended period.

• Engine mufﬂer will be hot from operation. Do not touch it with

bare skin or a severe burn may result.

• If the unit should start to vibrate abnormally, stop the engine

and check immediately for the cause.Vibration is generally a

warning of trouble.

AddITIONAL SAFETY INFORMATION (CE UNITS ONLY)

This rototiller unit has been tested and veriﬁed to be within the

acceptable level of noise range for CE compliance at 80dB

Lpa.

• Do not run the engine indoors; exhaust fumes are deadly.

• Do not overload the machine capacity by attempting to till too

deep at too fast of a rate.

This rototiller unit has been tested and veriﬁed to be within the

acceptable level of vibration for CE compliance at 6.2 m/s2.

• Never allow bystanders near the unit.

For the health and safety of the consumer it is recommended

that this product be used for no more than 2 consecutive hours

in any given 12 hour period.

• Never operate the tiller without good visibility or light.

• Be careful when tilling in hard ground.The tines may catch in

the ground and propel the tiller forward. If this occurs, let go

of the handlebars and do not restrain the machine.

• Take all possible precautions when leaving the machine

unattended. Disengage all control levers, stop the engine,

wait for all moving parts to stop, and make certain guards

and shields are in place.

• When leaving the operating position for any reason:

- shut off the engine.

- wait for all moving parts to stop.

800-ꢀ45-6007

Page 5

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

SAFETY dECALS

This rototiller unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry

leader in outdoor power equipment manufacturing.

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate

this equipment safely and effectively, we have placed several safety labels on the tiller to remind you of this important information

while you are operating the unit.

These important safety labels are illustrated below, and are shown here to help familiarize you with the location and content of the

safety messages you will see as you perform normal tilling operations. Please review these labels now. If you have any questions

regarding their meaning or how to comply with these instructions, reread the complete safety instruction text on the preceding pages,

or contact your local dealer.

Should any of the safety labels become unreadable because of being worn, faded, or otherwise damaged during the use of your tiller,

please use the part number information provided to order a replacement label from your local authorized dealer.

The safety labels are easily applied and will act as a constant visual reminder to you and others who may use the equipment. Follow

the safety instructions necessary for safe, effective operation of your rototiller.

Part No. LBL821B

hOOd WARNING

hood decal

ARDISAM, INC.

1160 8th Avenue

Cumberland, WI 54829

USA

Serial No.

LBLINFO3365CE

Part No. LBLꢀ100C

TINES dANGER/OPERATION

hood decal

Earthquake 3365CE

Year: 2010 Mass: 47.63 kg

Max. Operating Speed: 3600 rpm

Nominal Power Rating: 5.06 kW

Part No. LBLINFOꢀꢀ65CE

Name Plate

Tine Shield decal

Part No. LBLꢀ100h

Part No.

WARNING

LBLCENOISE80

decibel Level decal

Pivot Mount decal

Part No. LBLꢀ100d

CLUTCh ENGAGE

handlebar decal

Part No. LBL516C

WARNING

Belt Cover decal

Page 6

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

UNPACkING ANd ASSEMBLY

UNPACk TILLER & ASSEMBLE

IMPORTANT

ThE RIGhT ANd LEFT SIdES OFYOUR

ROTOTILLERAREdETERMINEdFROM

ThE OPERATING POSITION AS YOU

FACE ThE dIRECTION OF FORWARd

TRAvEL.

1. Open top of carton and remove handlebar assembly.

2. Find parts packet. Parts packet for 3365/3365B/3365K/3365CE

contains:

ENGINE IS ShIPPEd FROM FACTORY

WIThOUT OIL.YOU MUST Add ENGINE

OIL BEFORE STARTING ENGINE.

6- 5/16-18 x 1-3/4” bolts

6- 5/16” spring lockwashers

2- hand knobs

4- locknuts

2- 1/2” push nuts

1- detent pin

CAUTION

Parts packet for 3365PS/3365KPS/R3365H/3365PSCE con-

tains:

dO NOT TRY TO LIFT ThE ROTOTILLER FROM ThE

CARTON.

2- 3/8-16 x 1” bolts

2- 3/8-16 biway locknuts

2- 5/16-18 x 1” bolts

4- 5/16-18 x 1-3/4” bolts

6- 5/16” spring lockwashers

2- hand knobs

4- 5/16” locknuts

2- 1/2” push nuts

1- detent pin

3. Cut open end of carton and remove machine:

a. Install wheels on each end of axle; tap on push nuts with a

hammer.

NARROW TINE WIdTh

b. Assemble tines to unit, inside tines ﬁrst. Sharp edge of tine

will be away from operator at top, or face down at front of

machine.

c. Outside tines have two positions- wide 21” and narrow 16”.

For narrow width, assemble with short side of tine holder pipe

towards center of machine.

d. For wide width, move the left tine to the right side and right

tine to the left side. Assemble with the long half of tine pipe

towards machine.

e. Slide the top handle of handlebar over the lower loop. Put

5/16-18 x 1-3/4” bolts through both holes from inside out;

put on 5/16” spring lockwashers and tighten with hand

knobs. Models 3365PS, 3365KPS, and R3365H will use

3/8-16 x 1” bolts with nuts and 5/16-18 x 1”

bolts with hand knobs. See parts explosion on page 19.

f. Check upper and lower jam nuts for tightness. See page 9,

Belt Tension Adjustment.

WIdE TINE WIdTh

upper

handlebar

lower

handlebar

loop

g. Add and check engine oil.

INSTALL dEPTh REGULATOR LEvER

1. Install the depth regulator lever through hole in bracket from the

bottom up with curve to rear of unit and secure with detent pin.

hand knob

FILL ENGINE CRANkCASE

depth

regulator

lever

1. Addoilaccordingtoenginemanual.donotoverﬁll. Useaclean, high

qualitydetergentoil.ContainermustbemarkedA.P.I.ServiceSF-SJ.

Use no special additives with recommended oils.do not mix oil with

gasoline. Oil level must be full. Check the oil level by removing oil ﬁll

plug. Oil level should be up to the bottom of the ﬁll plug opening.

detent pin

2. Always check oil level before starting engine.Refer to engine manual

for capacity and type of oil to use.

800-ꢀ45-6007

Page 7

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

FEATURES (ꢀꢀ65/ꢀꢀ65B/ꢀꢀ65CE/ꢀꢀ65k)

The advantage of the EARThQUAkE® BAdGER™ gear drive rototiller over other front tine tillers is the exclusive

unfolding and ﬂexible drag bar. This gives the Earthquake® Badger™ gear drive tiller its stability and versatility.

For easy transport, fold the wheels under the engine. During operation, the wheels unfold back and the drag bar folds

down. The long length between the tines and the drag bar make this the most comfortable front tine tiller on the mar-

ket.

drive safety control lever

forward cable

hand knob

front belt cover

3-way adjustable tine widths

Transport Position

Operating Position

Page 8

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

CONTROLS

dRIvE SAFETY CONTROL LEvER

CAUTION

ThIS INFORMATION IS PROvIdEd hERE ONLY TO

INTROdUCE ThE CONTROLS. dO NOT START ThE

ENGINE ATThISTIME. STARTING ANd OPERATING

INSTRUCTIONS ARE GIvEN ON PAGE 10. PLEASE

REAd ThIS SECTION ANd ALL OPERATING ANd

SAFETY INSTRUCTIONS BEFORE STARTINGYOUR

TILLER.

Engages tines into forward; releasing returns machine to neutral.

Pulling down on the drive safety control lever engages the tines.

Releasing the drive safety control lever disengages the tines to a

neutral position.

BELT TENSION AdjUSTMENT

Proper belt tension is critical to good performance. After 30 minutes

of operation, all cables may have to be adjusted due to initial stretch.

Thereafter, check tension after every two hours of operation.

•

AS A SAFETY PRECAUTION,ThE dRIvE SAFETY

CONTROL LEvER WILL NOT LOCk IN ThE

FORWARd POSITION.

To increase belt tension:

•

TO STOP ThE WhEELS ANd TINES AT ANY

TIME, RELEASE ThE dRIvE SAFETY CONTROL

LEvER.

1. Loosen upper jam nut. Turn nut up cable in 1/8” increments.

2. Tighten lower jam nut.

3. Check adjustment.

This procedure can be repeated until conduit adjustment bolts have

no more adjustment left. If no more adjustment can be made, belt

may have to be replaced.

WARNING

ENGINE ShOULd BE OFF BEFORE AdjUSTING

ANY CONTROLS.

dO NOT AdjUST TILLING dEPTh UNLESS dRIvE

SAFETY CONTROL LEvER IS RELEASEd TO ThE

NEUTRAL POSITION.

dEPTh REGULATOR LEvER

Tilling depth is controlled by the height of the depth regulator lever.

To adjust tilling depth:

1. Remove detent pin.

2. Raise the depth regulator lever to position tines at chosen tilling

depth.

3. Align hole in depth regulator lever with hole in depth regulator

bracket and replace detent pin.

drive safety control lever disengaged

1/4” stretch

upper jam nut

lower jam nut

upper jam nut

lower jam nut

forward cable

Model ꢀꢀ65PS/ꢀꢀ65kPS/Rꢀꢀ65h/ꢀꢀ65PSCE

handlebar

Model ꢀꢀ65/ꢀꢀ65B/ꢀꢀ65k/ꢀꢀ65CE handlebar

800-ꢀ45-6007

Page ꢁ

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

OPERATION

PRE-START INSPECTION

1. Make sure all safety guards are in place and all nuts and bolts

are secure.

IMPORTANT

ENGINE IS ShIPPEd FROM FACTORYWIThOUT OIL.

YOU MUST Add ENGINE OIL BEFORE STARTING

ENGINE.

PRACTICE OPERATING ThE CONTROLS ANd

TILLER WITh TINES OUT OF GROUNd BEFORE

BEGINNING TO TILL. IT IS IMPORTANT ThAT YOU

kNOW hOWTO USEThETILLER PROPERLY, kEEP

CONTROL AT ALL TIMES, STOP ThE TINES ANd

WhEELS FROM TURNING, ANd STOP ThE ENGINE

IF NECESSARY. IF YOU dO NOT kNOW hOW TO

dO ThESE ThINGS, REAd ThE CONTROLS ANd

SAFETY SECTIONS BEFORE PROCEEdING.

2. Check oil level in engine crankcase. See your engine manual for

procedure and speciﬁcations.

3. Inspect air cleaner for cleanliness. See your engine manual for

procedure.

4. Check the fuel supply. Fill the fuel tank no closer than one inch

from top of tank to provide space for expansion. See your engine

manual for fuel recommendations.

5. Be sure spark plug wire is attached and spark plug is

tightened securely.

6. Check position of wheels.

CAUTION

7. Check depth regulator lever position.

PLEASE dO NOT START YOUR TILLER UNTIL YOU

hAvE REAdThE MANUALThAT CAMEWIThYOUR

ENGINE ANd ThE SECTIONS IN ThIS MANUAL

TITLEd “CONTROLS ANd SAFETY.” ONCE YOU

hAvE REAd ThESE, FOLLOW ThE APPROPRIATE

STEPSTO STARTYOURTILLER.ALWAYS PERFORM

ThIS PRE-START ChECkLIST BEFORE STARTING

ThE ENGINE.

8. Examine underneath and around engine for signs of oil or fuel

leaks.

9. Inspect fuel hoses for tightness and fuel seepage.

10.Look for signs of engine damage.

11.Remove excessive debris from mufﬂer area and recoil starter.

12.Turn fuel shutoff valve to the ON position if engine is equipped with

one. It’s located between tank and carburetor.

WARNING

START-UP

GASOLINE IS hIGhLY FLAMMABLE ANd MUST

BE hANdLEd WITh CARE. NEvER FILL ThE TANk

WhENThE ENGINE IS hOT OR RUNNING. ALWAYS

MOvE OUTdOORS TO FILL ThE TANk.

For models ꢀꢀ65, ꢀꢀ65B, ꢀꢀ65CE, ꢀꢀ65k, ꢀꢀ65kPS,

and ꢀꢀ65PS only.

The controls required to start and run the rototiller are located on the

engine and are marked CHOKE and THROTTLE.

TEMPERATURE OF MUFFLER ANd NEARBY AREAS

MAY ExCEEd 150° F. AvOId ThESE AREAS.

A more detailed description of engine operation and all related

precautions and procedures can be found in the engine manufacturer’s

manual that accompanies each tiller.

dO NOT MOvE ChOkE CONTROL TO ChOkE TO

STOP ENGINE. BACkFIRE OR ENGINE dAMAGE

MAY OCCUR.

TO STOPThE ENGINE AT ANYTIME, MOvEThROT-

TLE CONTROL TO ThE OFF POSITION. TO STOP

TINES AT ANY TIME, RELEASE dRIvE SAFETY

CONTROL LEvER TO ThE NEUTRAL POSITION.

COLd STARTS

1. Move choke lever to FULL choke position.

2. Move throttle lever to START.

ALWAYS RELEASE dRIvE SAFETY CONTROL

LEvER TO ThE NEUTRAL POSITION BEFORE

AdjUSTING ThE dEPTh OF ThE REGULATOR

LEvER.

3. Pull starting rope out slowly one time and allow to return

normally.

4. Pull starting rope out rapidly and allow rope to return normally.

5. When engine starts, gradually move choke lever to NO CHOKE

position and increase throttle speed.

RESTARTING A WARM ENGINE

Restarting an engine that is already warm from previous running does

not normally require the use of the choke.

1. Move throttle lever to START position.

2. Pull starting rope out rapidly until engine starts. Allow rope to

return normally. Repeat until engine starts.

3. Adjust throttle speed to HIgH for best tiller action.

Page 10

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

For models Rꢀꢀ65h and ꢀꢀ65PSCE only.

The controls required to start and run the rototiller are located on

the handle.

WARNING

ExTREME CAUTION MUST BE TAkEN IN SELECT-

INGTILLING dEPTh. IFYOU ATTEMPTTOTILLTOO

dEEPLY FOR SOIL CONdITIONS—ThAT IS, WITh

ThE dRAG STAkE IN TOO hIGh OF A POSITION—

LOSS OF CONTROL COULd RESULT.

A more detailed description of engine operation and all related

precautions and procedures can be found in the engine manufacturer’s

manual that accompanies each tiller.

COLd STARTS

IF REMOvING MATERIAL FROM ThE TINES BY

hANd, STOP ThE ENGINE ANd REMOvE SPARk

PLUG WIRE FIRST.

1. Move the throttle control to the FAST position.

2. Pull starting rope out slowly one time and allow to return

normally.

3. Pull starting rope out rapidly and allow rope to return normally.

4. Operate engine in the FAST position.

dANGER

ENGINE ANd SURROUNdING PARTS BECOME

ExTREMELY hOT dURING NORMAL USE ANdWILL

CAUSE SERIOUS BURN INjURIES IF TOUChEd

BEFORE ThE ENGINE hAS COOLEd.

RESTARTING A WARM ENGINE

Restarting an engine that is already warm from previous running does

not normally require use of the choke.

ALLOW ENGINE TO COOL COMPLETELY BEFORE

TOUChING ThESE hOT SURFACES.

1. Move throttle lever to FAST position.

2. Pull starting rope out rapidly until engine starts.Allow rope to return

normally. Repeat until engine starts.

ALWAYS kEEP hANdS ANd FEET CLEAR OF

ROTATING MAChINE PARTS.

3. Adjust throttle speed to FAST for best tiller action.

OPERATING SPEEd

For normal tilling, set the throttle lever to FAST.

ShUTTING dOWN

For models ꢀꢀ65, ꢀꢀ65B, ꢀꢀ65k, ꢀꢀ65kPS, ꢀꢀ65CE

and ꢀꢀ65PS only.

To stop the engine at any time, move the throttle control to the OFF

position. To stop wheels and tines at any time, release the drive safety

control to the NEUTRAL position.

For models Rꢀꢀ65h and ꢀꢀ65PSCE only.

To shut the engine off, push the throttle control lever all the way forward.

Turn the fuel shutoff valve to the CLOSED position.

TILLING

1. Adjust the depth regulator lever to desired tilling depth.

NOTE: Raise depth regulator lever up one hole at a time,

testing tiller operation after each raise. Raising depth regulator

lever too high can result in loss of control of tiller!

2. Move the throttle control to FAST.

3. Place the tiller in motion by pushing down on the drive safety control

lever; this will engage the tines.

800-ꢀ45-6007

Page 11

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

MAINTENANCE ANd STORAGE

MAINTENANCE SChEdULE

Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide you

with years of reliable operation.

Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance.

Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.

Before

Each Use

50 hours or

Every Season

Maintenance Operation

Page

Check belt tension

Change forward belt

Engine maintenance

Check oil level/change oil

Clean tine axle shaft

Lubrication

Check throttle control adjustment

EM = See engine manual

1 Adjust throttle control after ﬁrst three hours of operation or if engine is hard to start or run-on occurs.

2 Change oil after the ﬁrst ﬁve to eight hours of use, then after every 50 hours or every season. Change oil every 25

hours when operating under heavy load or in high temperatures.

SERvICING ThE ROTOTILLER

The following information will help you make the necessary checks

and perform the procedures required to follow the normal care

recommendations made for your rototiller unit.

WARNING

To prevent accidental starting:

If you prefer, your local authorized dealer can make these checks and

perform the required procedures for you.

Engine must be turned off and cool, and spark

plug wire must be removed and secured from

spark plug before checking and adjusting engine

or equipment.

Page 12

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

ChECk BELT TENSION

WARNING

Belt tension may decrease over time. It must be adjusted within

the ﬁrst half hour of operation and checked after every two hours of

operation. Proper adjustment will assure long belt life. Too much or

too little belt tension will cause premature belt failure. To check and

adjust the forward belt tension:

ChECk FORWARd BELT TENSION REGULARLY.

TOO MUCh OR TOO LITTLE TENSION WILL CAUSE

PREMATURE BELT FAILURE.

1. Turn off engine. Engine must be cool.

2. Remove spark plug wire from spark plug and secure.

3. With drive safety control lever in the NEUTRAL position, measure

length of spring when in its relaxed state.

remove belt

from front

4. Pull down on drive safety control lever and measure length of

spring when compressed. Ideal length would be 1/4” shorter.

ChANGE FORWARd BELT

1. Turn off engine. Engine must be cool.

2. Remove spark plug wire from spark plug and secure.

3. Remove front belt cover.

• Remove the belt from the engine pulley:

- gently pull the engine recoil rope to rotate the pulley.

- With the pulley turning, force the belt out of the V-groove.

- Slide the belt free of the engine pulley.

- Pull the belt down and out of the way.

- Push the belt forward and out front of machine.

• Install new belt:

BELT REPLACEMENT PART #:

3370 (forward)

- Place belt in transmission pulley groove.

- gently pull the engine recoil rope to rotate the pulley while

forcing the belt into the V-groove.

4. Replace front belt cover.

5. Attach spark plug wire.

800-ꢀ45-6007

Page 1ꢀ

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

ENGINE MAINTENANCE

IMPORTANT

Refer to the engine manual included in your parts packet for

information on engine maintenance. Your engine manual provides

detailed information and a maintenance schedule for performing the

following tasks:

ENGINEISShIPPEdFROMFACTORYWIThOUTOIL.

YOU MUST Add ENGINE OIL BEFORE STARTING

ENGINE.

1. Check oil level before each use or after every eight hours of

operation.

ENGINE CAN OvERhEAT ANd BECOME dAMAGEd

IF dEBRIS BLOCkS ThE COOLING SYSTEM OR

ROTATING SCREEN.

2. Change oil after ﬁrst ﬁve to eight hours of operation. Change oil

while engine is warm. Reﬁll with new oil of recommended grade.

NEvER RUN ENGINE WIThOUT COMPLETE AIR

CLEANER INSTALLEd ON ENGINE.

4. Check spark plug yearly or every 100 hours of operation.

5. Service air cleaner.

6. Keep engine and parts clean.

CAUTION

dO NOT OPERATE TILLER BEFORE REAdING

ThE ENGINE MANUAL PROvIdEd IN ThE PARTS

PACkET.

7. Check engine and equipment often for loose nuts and bolts; keep

these items tightened.

ChECk OR FILL ENGINE CRANkCASE

1. Add oil according to engine manual. do not overﬁll. Use a clean,

high-quality detergent oil.Container must be marked A.P.I.Service

SF - SJ. Use no special additives with recommended oils. do not

mix oil with gasoline. Oil level must be full. Check the oil level

by removing oil ﬁll plug. Oil level should be up to the bottom of the

ﬁll plug opening on most engines.

WARNING

TEMPERATURE OF MUFFLER ANd NEARBY AREAS

MAY ExCEEd 150° F. AvOIdThESE AREAS.

2. Always check oil level before starting engine. Refer to engine

manual for capacity and type of oil to use.

CLEAN TINE AxLE ShAFT

1. Turn off engine. Engine must be cool.

2. Remove spark plug wire and secure from spark plug.

3. Remove all vegetation, string, wire, and other material that may

have accumulated on the axle between the inside set of tines and

the seal on the transmission housing.

4. Replace spark plug wire.

LUBRICATION

Proper lubrication of moving mechanical parts is critical for proper care

and maintenance. Oil the moving parts using a 30-weight oil.

Page 14

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

STORAGE

PREPARE FOR STORAGE

Follow the steps below to prepare your tiller for storage. Read your

engine manual for detailed instructions on preparing the engine for

storage.

WARNING

dO NOT STORE TILLER IN AN UNvENTILATEd

AREA WhERE FUEL FUMES MAY REACh FLAME,

SPARkS, PILOT LIGhTS OR AN IGNITEd OBjECT.

dRAIN FUEL OUTdOORS AWAY FROM ANY

IGNITION SOURCES. USE ONLY APPROvEd FUEL

CONTAINERS.

1. Protect wheels and axles from rust:

- Coat the axles lightly with axle grease.

2. Drain fuel system completely following engine manufacturer’s

instructions or add fuel stabilizer to prevent fuel from gumming up

during extended storage period.

3. While engine is still warm, drain the oil from the engine. Reﬁll with

fresh oil of the recommended grade.

4. Clean external surfaces, engine and cooling fan.

5. Remove spark plug; pour one ounce of SAE 30 oil into spark plug

hole.

6. Plug hole and pull starter cord slowly to distribute oil evenly in

cylinder head area.

7. Reinstall spark plug.

8. Transport unit to a suitable storage location. If you have chosen to

use a fuel stabilizer and have not drained the fuel system, follow all

safety instructions storage precautions in this manual to prevent the

possibility of ﬁre from the ignition of gasoline fumes. Remember,

gasoline fumes can travel to distant sources of ignition and ignite,

causing risk of explosion and ﬁre.

9. If there is any possibility of unauthorized use or tampering, remove

the spark plug and store it in a safe place before storing the rototiller

unit.Be sure to plug the spark plug hole to prevent foreign material

from entering.

800-ꢀ45-6007

Page 15

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

TROUBLEShOOTING ANd REPAIR

WARNING

TROUBLEShOOTING GUIdE

PRACTICE SAFETY AT ALL TIMES. ENGINE MUST BE

TURNEd OFF ANd ALLOWEd TO COOL, ANd SPARk

PLUGWIRE MUST BE dISCONNECTEd ANd SECUREd

BEFORE ATTEMPTING ANY MAINTENANCE OR

REPAIR.

FAILURE TO COMPLY WITh ThIS SAFETY REQUIREMENT

CAN RESULT IN SERIOUS PERSONAL INjURY TO YOU

OR BYSTANdERS.

While normal care and routine maintenance will extend the life of

your rototiller, prolonged or constant use may eventually require

that service be performed to allow it to continue operating properly.

The troubleshooting guide below lists the most common problems,

causes and remedies.

PROBLEM

REMEdY/ACTION

Engine will not start

• Add gas to gas tank.

• Connect spark plug wire to spark plug.

• Throttle must be positioned at choke for a cold start.

Engine runs rough, ﬂoods during operation

Engine is hard to start

• Clean or replace air cleaner.

• Drain old fuel and replace with fresh. Use gas stabilizer

at end of season.

• Make sure spark plug wire is securely attached to spark

plug.

• Drive safety control lever must be released to neutral

to start the engine.

Engine misses or lacks power

• Raise the tines for shallow tilling by raising the depth

regulator lever.

• Clean or replace air cleaner.

• Improper carburetor adjustment, take to authorized

engine service center.

• Replace spark plug and adjust gap.

• Drain and reﬁll gas tank and carburetor.

Engine will not stop when throttle control is positioned at stop • See engine manual to check and adjust throttle linkage.

Tiller moves forward during starting

• Drive safety control lever must be released to neutral

to start the engine.

Tiller is difﬁcult to control when tilling

(machine jumps or lurches forward)

• Lower engine speed in hard ground.

• Raise the tines for shallower tilling by lowering the

depth regulator lever.

Belts squeal in neutral

• Adjust forward belt guide:

- turn engine off and allow mufﬂer to cool

- disconnect spark plug wire and secure from spark plug

- pull down on drive safety control lever

- manually bend forward belt guide so there is 1/16 inch

or less clearance between belt guide and belt

- replace spark plug wire

Belts squeal in forward operation

• Turn engine off and allow mufﬂer to cool.

• Disconnect spark plug wire and secure from spark plug.

• Release drive safety control lever to neutral.

• Adjust engage cable.

• Replace spark plug wire.

Excessive heat build up in transmission/tine area during till-

ing

• Remove vegetation.

• Check transmission ﬂuid and ﬁll if needed.

Page 16

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

ꢀꢀ65/ꢀꢀ65B/ꢀꢀ65CE/ꢀꢀ65k hANdLEBAR PARTS

REF. PART #

NO.

dESCRIPTION

QTY.

REF. PART # dESCRIPTION

NO.

QTY.

3108A

3170

3262

3268

3269

3335

48406

CABLE ASSEMBLY W/FERREL

NUT, PUSH 3/8” DIA.

504

LOCKWASHER, SPRINg 5/16”

NUT, HEX NYLOC 10-24

53606

53607

53620

8655

DRIVE SAFETY CONTROL LEVER

LINK, 5-3/4” LONg

NUT, HEX JAM 5/16-24

SPRINg, COMPRESSION

BOLT, HEX HD 5/16-18 X 1-3/4”

HANDLE, TOP

HANDLE, BOTTOM

90141

BOLT, SFHH W/PATCH

3/8-16 X 1” gR5

KNOB, FIVE-STAR 5/16-18

800-ꢀ45-6007

Page 17

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

ꢀꢀ65PS/ꢀꢀ65kPS hANdLEBAR PARTS

REF. PART # dESCRIPTION

NO.

QTY.

REF. PART # dESCRIPTION

NO.

QTY.

1501

BOLT, SOC FLg HEX HD 5/16-18

X 3/4” gR5

53612

53614

53620

53629

53631

53632

53650

60g56

90138

LINK 11-5/8” LONg

PIN, CLEVIS 1/4 X 1-1/2”

SPRINg, COMPRESSION

BRACKET, CABLE MOUNT

gRIP, HANDLEBAR 1” ID FLANgELESS

NUT, PUSH 1/4”

2104

3108A

3358

3359

503

NUT, BI-WAY HEX LOCK 3/8-16

CABLE ASSEMBLY W/FERREL

MOUNT, HANDLEBAR

HANDLEBAR WELDMENT

BOLT, HH 5/16-18 X 1-1/2”

LOCKWASHER, SPRINg 5/16”

NUT, HEX NYLOC 10-24

LEVER, CONTROL

504

NUT, BI-WAY LOCK 5/16-18

BOLT, SFHH 3/8-16 X 3/4”

53606

53607

NUT, HEX JAM 5/16-24

WF516 WASHER, FLAT 5/16”

Page 18

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

Rꢀꢀ55h/ꢀꢀ65PSCE hANdLEBAR PARTS

REF. PART #

NO.

dESCRIPTION

QTY.

REF. PART # dESCRIPTION

NO.

QTY.

331059

BOLT, HEX

53607

53612

53614

53620

53629

53631

53632

53650

NUT, HEX JAM 5/16-24

LINK 11-5/8” LONg

W1265v0913 NUT, HEX

3310118

KIT, THROTTLE CONTROL

W/HARDWARE

PIN, CLEVIS 1/4 X 1-1/2”

SPRINg, COMPRESSION

BRACKET, CABLE MOUNT

gRIP, HANDLEBAR 1” ID FLANgELESS

NUT, PUSH 1/4”

1501

BOLT, SOC FLg HEX HD 5/16-

18 X 3/4” gR5

2104

3108A

3358

3359

503

NUT, BI-WAY HEX LOCK 3/8-16

CABLE ASSEMBLY W/FERREL

MOUNT, HANDLEBAR

LEVER, CONTROL

60g56 NUT, BI-WAY LOCK 5/16-18

90138 BOLT, SFHH 3/8-16 X 3/4”

WF516 WASHER, FLAT 5/16”

HANDLEBAR WELDMENT

BOLT, HH 5/16-18 X 1-1/2”

LOCKWASHER, SPRINg 5/16”

NUT, HEX NYLOC 10-24

504

53606

800-ꢀ45-6007

Page 1ꢁ

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

ꢀꢀ65_ꢀꢀ65B__ꢀꢀ65k_ꢀꢀ65kPS_ꢀꢀ65CE_ꢀꢀ65PS_ꢀꢀ65PSCE

MOTOR MOUNT & hOOd PARTS

not used for 3365K

and 3365 KPS

Model ꢀꢀ65PS, ꢀꢀ65B,

ꢀꢀ65CE drive Pulley

MOdEL ꢀꢀ65PS_ꢀꢀ65PSCE_

ꢀꢀ65kPS BUMPER

Page 20

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

ꢀꢀ65_ꢀꢀ65B_ꢀꢀ65CE_ꢀꢀ65PS_ꢀꢀ65kPS_ꢀꢀ65PSCE MOTOR MOUNT & hOOd PARTS

REF. PART #

NO.

dESCRIPTION

QTY. REF. PART #

NO.

dESCRIPTION

QTY.

1401

1407

1413

1416

1418

BOLT, HHCS 5/16-18 X 1-1/4” gR5

SPRINg, FORWARD ARM

PULLEY, FORWARD IDLER

PIN, LINK

3370

BELT, FORWARD

48300

53596B

60g56

63118

67538

69170

715

BOLT, HHCS 5/16-18 X 2-1/4” gR5

YOKE, CABLE

NUT, BI-WAY LOCK 5/16-18

BOLT, HHCS 1/4-20 X 1/2”

NUT, HEX NYLOC 1/4-20

PIN, DETENT 5/16” X 2”

PIN, COTTER

1714252 WHEEL & TIRE ASSY 11.0 X 1.75

1960519 PUSH NUT 1/2” DIA.

2108

3128

3130A

3157

3171

NUT, NON-LOCKINg HEX 3/8-16

SHIELD, TINE

SET SCREW 1/4-20 X 1/4”

(Part used only on 3365, 3365K,

and 3365KPS models)

FRAME, ENgINE MOUNT

LEVER, DEPTH REgULATOR

719

WASHER, SPRINg LOCK 3/8”

SPACER, BELT gUIDE

744

PULLEY, ENgINE, SINgLE gROOVE

(Part used only on 3365, 3365K and

3365KPS models)

90140

BOLT, HEX HD 5/16-18 X 3-1/4”

2002

BOLT, HEX HD 3/8-16 X 1-1/2”

(3365K and 3365KPS models only)

3182A

3196

3202

BELT gUIDE & MOUNT

BOLT, HHCS 1/4-20 X 7-1/2” gR5

WF516

WL14

90141

WASHER, FLAT 5/16”

SCREW, SHEET METAL 1/4 X 3/4”

(3365, 3365B,3365CE)

WASHER, SPRINg LOCK 1/4”

BOLT 3/8-16X1 SFHH gR5ZN W

PATCH

3237

COVER, FRONT BELT

(3365, 3365B,3365CE)

MOdEL ꢀꢀ65PS/ꢀꢀ65PSCE BUMPER GUARd PARTS

3275

3305

SHIELD, DIRT

1516

BOLT, SOC FLANgE HEX HD,

1/4-20 X 3/4”

ENgINE, 6.50 T.R. BRIggS (3305,

3365PS, 3365B, 3365CE)

3335

3371

ARM LOWER HANDLEBAR

3305CE

3306

ENgINE, 5.50 T.R. BRIggS (3306,

3365)

COVER, FRONT 4-HOLE (re-

places 3237)

ENgINE, 6.50 T.R. BRIggS (3365B,

3365PS)

67538

WF14

NUT, HEX NYLOC 1/4-20

WASHER, FLAT 1/4”

3307CE

2000

ENgINE, 8.5 T.R. BRIggS

(3365PSCE)

MOdEL ꢀꢀ65PS, ꢀꢀ65PSCE dRIvE PULLEY PARTS

807

BOLT 5/16-24X3/4 W/PATCH

BHSCS

ENgINE, 7.25 T.R. KOHLER (3365K

and 3365KPS)

809

WASHER FLAT 1” OD X .047

SPACER

3330

3329

3331

3332

3360

3364

TAIL MOUNT, LOWER

TAIL MOUNT, UPPER

3207

741

SPACER .055 THICK X .755 ID X

1.244 OD

SHAFT, WHEEL 1/2”

SHAFT, TAIL MOUNT HINgE 1/2”

IDLER ARM, FORWARD

KEY, SQUARE 3/16” X 5/8”

SPACER DRIVE PULLEY

.900”

3178

PULLEY SINgLE gROOVE

ENgINE

800-ꢀ45-6007

Page 21

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

Rꢀꢀ55h MOTOR MOUNT & hOOd PARTS

MOdEL Rꢀꢀ55h BUMPER

Page 22

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

Rꢀꢀ55h MOTOR MOUNT & hOOd PARTS

REF. PART # dESCRIPTION

NO.

QTY.

REF. PART #

NO.

dESCRIPTION

QTY.

1407

1413

1416

1418

SPRINg, FORWARD ARM

PULLEY, FORWARD IDLER

PIN, LINK

53194

BOLT, HEX HD FULL THRD 3/8-24 X

1” gR5

53596B

60g56

63118

67538

69170

712

YOKE, CABLE

NUT, BI-WAY LOCK 5/16-18

BOLT, HEX HD CAP SCR 1/4-20 X 1/2”

NUT, HEX NYLOC 1/4-20

PIN, DETENT 5/16” X 2”

PIN, COTTER

1714252 WHEEL & TIRE ASSY 11.0 X 1.75

1960519 PUSH NUT 1/2” DIA.

2108

NUT, NON-LOCKINg 3/8-16

SHIELD, TINE

BOLT HEX HD 5/16”-24 x 1/2”

BOLT, HEX HD 5/16-24 X 1-3/4”

WASHER, SPRINg LOCK 3/8”

SPACER, BELT gUIDE

3128

717

3130A

3157

FRAME, ENgINE MOUNT

LEVER, DEPTH REgULATOR

719

744

31781

PULLEY, ENgINE, SINgLE

gROOVE 3/4” ID MODIFIED

809

WASHER, FLAT 1” OD X 5/16” X .047”

THICK

31782

3182A

3196

SPACER, ENgINE

813

BOLT, HEX HD 5/16-24 X 1-1/4”

WASHER, FLAT 5/16”

BELT gUIDE & MOUNT

WF516

WK6

BOLT, HEX HD CAP SCR

1/4-20 X 7-1/2” gR5

KEY, WOODRUFF #6

3275D

33055

3329

3330

3331

3332

3360

3370

SHIELD, DIRT W/HOLE

ENgINE, 5.5 HP HONDA

TAIL MOUNT, UPPER

TAIL MOUNT, LOWER

SHAFT, WHEEL 1/2”

WL14

WASHER, SPRINg LOCK 1/4”

MOdEL Rꢀꢀ55h BUMPER GUARd PARTS

1516

BOLT, SOC FLANgE HEX HD

1/4-20 X 3/4”

3335

3371

67538

ARM LOWER HANDLEBAR

COVER, FRONT 4-HOLE

SHAFT, TAIL MOUNT HINgE 1/2”

IDLER ARM, FORWARD

BELT, FORWARD

BOLT, SOC BUTTON HD CAP SCR SS

1/4-20 X 1-1/2”

WF14

WASHER, FLAT 1/4”

800-ꢀ45-6007

Page 2ꢀ

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

TINES & TRANSMISSION PARTS

REF. PART #

NO.

dESCRIPTION

QTY.

REF. PART #

NO.

dESCRIPTION

QTY.

1511

1601

BOLT, SFHH 1/4-20 X 7/8”

3364

504

KEY 3/16 X 1/2”

BEARINg, TAPERED

(includes cone & race)

LOCKWASHER, SPRINg 5/16”

CASTINg, RIgHT SIDE

CASTINg, LEFT SIDE

56100B

56101B

60g56

67538

802

1701

1810

3116

3122

3179

3205W

KEY, HALF MOON 1/4 X 1”

SNAP RINg, EXTERNAL

gEAR, BRASS 1” ID

NUT, BI-WAY LOCK 5/16-18

NUT, NYLOC 1/4”

SHAFT, DRIVE

SCREW, HEX HD 5/16-24 X 3/4”

WASHER 5/16” ID X 1-5/8” OD

BOLT, HEX HD 5/16-18 X 1-3/4”

BEARINg, BALL R12

PULLEY, SINgLE gROOVE

803

BEARINg, SEALED 1” ID (replaces 3205

bearing & 747 spacer)

8655

8922

8924

3322

3323

3324

3326

SHAFT, TINE 1”

SNAP RINg, EXTERNAL 3/4”

TINE SET, OUTSIDE RIgHT

TINE SET, INSIDE

3310TRAN TRANSMISSION, COMPLETE

3334

KIT, TINES W/ DRAg STAKE

(not shown)

TINE SET, OUTSIDE LEFT

Page 24

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

FRONT TINE ROTOTILLERS

1-YEAR LIMITEd WARRANTY

Terms and Conditions

Ardisam, Inc., a manufacturing company, warrants this EARThQUAkE® FRONT TINE ROTOTILLER to be free from

defects in the material or workmanship for a period of one year from the date of purchase. During the one-year warranty

of this product, Ardisam will furnish 100% parts and labor to correct any defect caused by faulty material or workmanship.

Items subject to normal wear and tear, such as belts, batteries, tines, shear bolts and tires, due to the nature of their

function are not covered under this warranty. Any unit used in a commercial application is covered for a period of 90

days after purchase. The engine is covered under a separate warranty issued by the engine manufacturer as stated in

the engine manual.

If warranty work needs to be done, contact your place of purchase or Ardisam, Inc., for an authorized service center

in your area. Ardisam will make the necessary repairs if a service center is not available. To obtain warranty service

and/or replacement instructions, you must have prior approval from Ardisam before shipping your package to

us by calling our customer service department at 800-ꢀ45-6007 Monday through Friday from 8 a.m. to 5 p.m., for

a return material authorization number (RMA#). All items must be shipped prepaid. Ardisam, Inc. will at no charge,

repair or replace, at their discretion, any defective part which falls under the conditions stated above.

Ardisam retains the right to change models, speciﬁcations and price without notice.This product if used as intended, will

give you years of trouble free service. We hope you will enjoy the quality of our products for years to come.

For replacement parts, phone 800-ꢀ45-6007 or go online to www.GetEarthquake.com.

This warranty applies to the original owner with a proof of purchase and is not transferable. It supersedes all other war-

ranties either expressed or implied and all other obligations to liabilities on our part. Ardisam, Inc. does not assume, and

does not authorize any other person to assume for us, any liability in connection with the sale of our products.

The warranty applies only to products which have not been subjected to negligent use, misuse, alteration, accident or

repairs made by anyone not certiﬁed by Ardisam, Inc.This guarantee is void unless the warranty card is properly ﬁlled out

and received by Ardisam, Inc., within 30 days of purchase or go to www.GetEarthquake.com for online registration.

EARTHQUAKE

A Division of Ardisam, Inc.

1160 Eighth Avenue; P.O. Box 666

Cumberland, Wisconsin 54829

800-345-6007 · Fax (715) 822-4180

E-mail: [email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

NOTES

_____________________________________________________________________________________________

Page 26

800-ꢀ45-6007

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATOR INSTRUCTIONS ANd PARTS

Front Tine Models 3365_3365B_3365K_3365KPS_3365CE_3365PS_R3355H_3365PSCE

NOTES

_____________________________________________________________________________________________

800-ꢀ45-6007

Page 27

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Visit www.ardisam.com and discover more innovations that will

beneﬁt you throughout the year.

IMPORTERS/ REPAIR CENTERS (FOR U.k. CUSTOMERS)

ROChFORd GARdEN MAChINERY LTd.

WINCANTON BUSINESS PARk , WINCANTON

SOMERSET, ENGLANd, BAꢁ, ꢁRS

Earthquake, A Division of Ardisam, Inc.

1160 Eighth Avenue; P.O. Box 666

Cumberland, Wisconsin 54829

800-345-6007 · Fax (715) 822-4180

E-mail: [email protected]

GetEarthquake.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Craftsman Tiller 91729249 User Manual
Cuisinart Coffee Grinder DCG 12BCC User Manual
Cuisinart Life Jacket classic stainless kettle User Manual
Delta Electronics Power Supply S24SA User Manual
DLO MP3 Player Accessories DLZ62000 User Manual
Duracraft Fan DW 627 User Manual
Dynex Camera Accessories DX CRCF12 User Manual
Electro Voice Microphone 672A User Manual
GE Monogram Double Oven ZET857WBWW User Manual
Generac Portable Generator 5500EXL User Manual