EVGA Computer Monitor 200 LM 1700 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
1. PRODUCT OVERVIEW  
1.1What’s Included  
The following items are included with InterView:  
InterView Monitor:  
Dual – 17 Inch – LCD Panels  
InterView Multiplatform Control Base  
AC Power Adapter  
Power Cord  
DMS to DUAL DVI-I Signal Cable  
DVI-I to VGA Adapter  
Microphone Audio Cable  
USB Cable  
Visual Guide  
Drivers and Software CD  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1.2Safety Instructions  
Safe Environment  
Do not store or use the InterView in locations that are exposed to heat, extreme cold, high  
humidity or dusty environment. Room temperature conditions are recommended.  
Do not subject InterView to severe vibrations or high impact conditions.  
Do not allow water or other liquids to spill on or into InterView.  
InterView may become unstable if not placed on a solid and horizontal surface.  
Safe Use  
To avoid electric shock, never touch the components inside of InterView. Only a qualified  
technician should open the monitor case.  
Do not try to insert anything metallic or push objects into any openings.  
Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air as these will  
cause damage to the LCD screens. If possible, use a special screen-cleaning tissue or  
solution suitable for the anti-static coating.  
Handle your monitor with care as darker-colored plastics may scratch and show scuff  
marks.  
Keep hands off the gap between the stand and the panel as injury may take place while  
rotating or folding the LCD portion of InterView.  
Unplug the monitor when it is going to be left unused for an extended period of time or  
before any type of service is performed.  
Consider keeping the packaging for use in the future when you may need to transport the  
monitor. The fitted foam packing is ideal for protecting the monitor during transport.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1.3 Product Views  
Panel Front View  
1. Integrated Webcam  
2. Balance Bar  
3. Multiplatform Control Base  
4. Integrated 3-Port USB 2.0 Hub  
5. 17 Inch LCD Panels  
5
5
1
3
2
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Control Base Front View  
1. Power Button  
2. Power Light Indicator (Left Panel)  
3. Power Light Indicator (Right Panel)  
4. Panel Selection Button  
5. Brightness Adjust (Down)  
6. Brightness Adjust (Up)  
7. Auto Adjust  
8. Integrated Microphone  
2
1
3
7
5
6
4
8
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Base Back View  
1. USB to PC Port  
2. Microphone Jack  
3. DMS Port  
4. AC Power Connector  
1
3
4
2
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. INTERVIEW SPECIFICATIONS  
2.1 InterView Technical Specifications  
General  
Model number  
LCD  
EVGA InterView 1700  
Screen type  
17’’Wide TFT  
Preset display area  
Horizontal  
367.20 mm  
229.50 mm  
Vertical  
Synchronization  
Horizontal  
Vertical  
31.5 kHz to 81.1 kHz  
56 Hz to 76 Hz  
Viewing angle  
Horizontal  
20° / 35° (CR=10)  
45° / 45° (CR=10)  
0.255 X 0.255 mm  
220 typ.  
500:1 typ.  
8ms typ. (14ms typ. max)  
Vertical  
Pixel pitch  
White luminance  
Contrast ratio  
Response Time  
Resolution  
Optimal preset resolution  
Highest preset resolution  
Physical Characteristics  
1440x900*2 @ 60 Hz  
1440x900*2 @ 60 Hz  
Dimensions  
Bezel Closing Dimension  
Bezel Opening Dimension  
417 x 485 x 390 mm  
369 x 188 x 870 mm  
Weight  
7.5 kg/16.52 lbs  
Environmental  
Operating  
Temperature  
Humidity  
5° to 35°C  
30% to 80% (non-condensing)  
Non-operating  
Temperature  
Humidity  
-10° to 60°C  
10% to 85% (non-condensing)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2.2 Preset Timing Modes  
The screen will be adjusted automatically when the signal transferred from the computer is  
the same as the following Preset Timing Modes. If your display mode is not listed, it is not  
supported by this monitor; the screen may go blank while the power LED is on.  
Horizontal Frequency Vertical Frequency  
Sync Polarity  
(Horizontal/Vertical)  
Display Mode  
Pixel Clock (MHz)  
(kHz)  
(Hz)  
59.940  
75  
VESA, 640x480  
VESA, 640x480  
VESA, 800x600  
VESA, 800x600  
VESA, 800x600  
VESA, 1024x768  
VESA, 1024x768  
VESA, 1152×864  
VESA, 1280x1024  
VESA, 1280x1024  
VESA, 1440x900  
VESA, 1440x900  
31.469  
37.500  
37.879  
45.072  
46.875  
48.363  
60.023  
67.500  
63.981  
79.976  
55.935  
70.635  
25.175  
31.500  
40.000  
46.875  
49.500  
65.000  
78.750  
108.000  
108.000  
135.000  
106.500  
136.750  
-/-  
-/-  
+/+  
+/+  
+/+  
-/-  
+/+  
+/+  
+/+  
+/+  
-/+  
60.317  
72  
75  
60.004  
75.029  
75.000  
60.020  
75.025  
59.887  
74.984  
-/+  
2.3 Power Management Modes  
For energy conservation, InterView has built-in power management that saves energy by  
switching itself to low-power mode when it has not been used for a certain amount of time.  
It automatically returns to normal operation when the users press a key on the keyboard. It  
is recommended to turn InterView OFF when it is not needed or when leaving it unattended  
for long periods of time.  
VESA Modes  
Normal operation  
Active-off mode  
Switch off  
Horizontal Sync  
Active  
Vertical Sync  
Active  
Video  
Active  
Blanked  
n/a  
Power Indicator  
Blue  
Amber  
Off  
Inactive  
n/a  
Inactive  
n/a  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3. SETTING UP INTERVIEW  
Read the safety instructions before setting up the InterView.  
3.1Steps to Assembling InterView  
1. Rotate the balance bar out from the bottom of the base:  
2. Remove the caps on the stand and the panel:  
3. Assemble the stand and the panel:  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4. Push in the button and turn it clockwise to lock up the stand and the panel:  
5. Open up the panel:  
6. Push the balance bar back into the base:  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2Connecting InterView to a PC  
Before setting up InterView, you must power down your computer(s).  
1. Connect the monitor to a computer(s) using the DMS to Dual DVI-I cord.  
Note: You can use either the D-Sub plug or the DVI-D plug if there’s no available  
DVI-I port on your PC.  
2. Plug the power cord into the power adapter:  
3. Connect the monitor to the electrical outlet using the power cord:  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Power on InterView and the computer(s):  
5. Use the audio cable to connect InterView to the MIC or Line-in input of the computer.  
This is required to use the onboard microphone.  
6. Connect InterView to the computer(s) with the USB cable to enable the front USB 2.0  
HUB located on the monitor base. This is also required to use the onboard webcam.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3Plug and Play Compatibility  
You can use InterView with any Plug and Play compatible system. The system configures  
itself and optimizes the display’s settings. In most cases, InterView‘s installation is  
automatically processed unless the user intervenes.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. HOW TO ADJUST INTERVIEW  
4.1Rotating/Folding  
Each panel can rotate 180 degrees. The display will automatically adjust to the correct  
position.  
Each panel can be opened and closed 90 degrees horizontally.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4.2Control Buttons  
2
3
5
4
1
1. Power Button: Powers the InterView ON or OFF  
2. Panel Selection Button: Selects the monitor to be adjusted  
3. Brightness Adjust (Down): Decreases brightness levels  
4. Brightness Adjust (Up): Increases brightness levels  
5. Auto Adjust: Adjusts vertical position, phase, horizontal position, and pixel clock  
automatically  
4.3Brightness Adjustment  
Users can adjust the monitor brightness levels from the Brightness (Up/Down) buttons. The  
Brightness levels can be adjusted from level 0 to level 8 and will be displayed on the screen  
while adjusting. Press the Panel Selection Button to select the panel to be adjusted.  
4.4Auto Adjustment  
Users can obtain an optimal display when using the AUTO key function. When the 'AUTO'  
button is pressed, InterView will optimize the currently selected panel.  
Auto Adjustment is disabled when using a DVI connection or DVI dongle.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
5. SYSTEM REQUIREMENTS AND SOFTWARE INSTALLATION  
5.1System Requirements  
Operating Systems Supported:  
- Windows XP Home Edition  
- Windows XP Professional  
- Windows XP Professional X64 Edition  
- Windows Vista™  
- Windows Vista™ 64-bit  
Hardware:  
- 64MB of System Memory or more  
- 50MB Hard Disk space or more  
Others:  
- Microsoft DirectX 9.0C  
5.2Installing the Webcam Software  
Some functions provided in InterView Application may not work if the driver is not  
installed properly  
(Step 1) Before the Installation  
- View the Device Manager to check if the InterView webcam has already installed. Select  
Start (XP)Run or (Vista)Search Box type devmgmt.msc Click OK. The Device  
Manager window will appear. Expand “Imaging Devices” to reveal the device name: USB2.0  
UVC PC Camera.  
- Insert the InterView CD into the disc drive. The AutoPlay dialogue box will appear.  
- Click Run autorun.exe  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
(Step 2) Processing Installation  
- Click Webcam software installation to start the installation process  
- Click Next, select the application you would like to install, then click Next to continue  
Note: For users who select to install both webcam driver and application, the installation will  
starts from the webcam software then to the webcam driver.  
Installing the Webcam Application  
- Select the destination folder then click Install to begin the installation  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- Installation in process, the dialogue box will automatically close when the installation  
completes.  
Installing the Webcam Driver  
- Click Install  
- Click Install  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- Click Finish then select the option to restart you computer after the installation completes  
Note: Depending on each user’s PC system and hardware performance, it may take 10 to 15  
seconds before entering to the next step, please be patient.  
- Click Finish to exit the wizard, then the computer will automatically restart.  
(Step 3) Self Check  
To ensure the driver has successfully installed, visit the Device Manager to check if the device  
name has changed to InterView USB 2.0 Webcam. You can find the InterView Control Center  
under Programs when after the InterView camera application is successfully installed  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.3Using the InterView Camera Application  
Main Panel Layout  
4
6
2
1
5
7
3
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Display screen  
Record  
Snapshot  
Color setting page  
Snapshot setting page  
Record setting page  
Misc setting page  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Color Setting Page  
This panel allows users to adjust the color settings by dragging the track bars.  
1
6
7
2
3
4
8
9
5
1. Brightness adjustment  
2. Contrast adjustment  
3. Hue adjustment  
4. Saturation adjustment  
5. Sharpness adjustment  
6. White balance adjustment  
7. Gamma adjustment  
8. Color / Gray scale  
9. Backlight compensation  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Snapshot Setting Page  
The InterView webcam application allows users to capture a single photo as well as continuous  
shooting. In this panel, the application allows users to set snapshot functions, such as time  
intervals and output formats.  
1
2
3
4
5
1. Photo quantity for continuous shooting (1-30)  
2. Time intervals for continuous shooting (500ms – 2000ms)  
3. Image format. Options are: BMP / JPEG / GIF  
4. Destination file for images  
5. Shutter  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Record Setting Page  
This panel allows adjustments to the recording function of the webcam.  
4
1
2
3
5
6
7
1. Select the audio device to be captured  
2. Select the audio recording source. Ex: Microphone  
3. Select the audio encoder to encode the audio stream  
4. Select the video encoder to encode the video stream  
5. Set file limits  
6. Set time limits  
7. Recording file save path  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Misc Setting Page  
Within this panel, users can adjust settings that control different aspects of the image.  
1
2
3
4
1. Video Flip: Flips the video horizontally/vertically  
2. Exposure control  
- Low Light: avoid under-exposure in low light environment  
- High Light: avoid under-exposure in high light environment.  
3. Flicker Reduction: Avoids flicker  
4. Picture Quality: Select for better quality or faster speed.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. TROUBLESHOOTING  
6.1Self-Test Feature Check  
Self-Test Feature Check (STFC) allows users to check if the monitor works properly.  
1.  
2.  
3.  
4.  
Turn off both your computer and the monitor  
Unplug the DMS cable from the back of the computer  
Turn on the monitor  
If the monitor is functioning properly, you will see a box in the illustration below  
This box appears during normal operation if the video cable becomes disconnected or  
damaged.  
5.  
Turn off your monitor and reconnect the video cable; then turn on both your computer  
and the monitor.  
6.  
If the power indicator remains orange after using the previous procedure, check your  
VGA card, cable, and computer system; your monitor is functioning properly.  
6.2FAQs  
Before calling for assistance, check the information in this section to see if you can  
remedy any problems yourself.  
Symptoms  
Possible Solutions  
Check connection integrity at both ends of the video cable  
Electric outlet verification  
Ensure power button is depressed fully  
No picture  
Increase brightness via OSD  
Perform monitor self-test feature check  
Check for bent or broken pins  
No picture or no brightness  
Auto Adjust via OSD  
Eliminate video extension cables  
Perform monitor reset  
Lower video resolution or increase font size  
Picture is fuzzy, blurry or ghosting  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Auto Adjust via OSD  
Perform monitor reset  
Check environmental factors  
Relocate and test in another room  
Wavy picture or fine movement  
Cycle power on-off  
These are pixels that are permanently off and is a natural defect  
that occurs in LCD technology  
LCD screen has spots  
Cycle power on-off  
These are pixels that are permanently on and is a natural defect  
that occurs in LCD technology  
LCD screen has bright spots  
Perform monitor reset on "Factory Reset"  
Auto Adjust via OSD  
Adjust brightness via OSD  
Picture too dim or too bright  
Screen not centered correctly  
Perform monitor reset on "Display Reset"  
Auto Adjust via OSD  
Adjust brightness via OSD  
Ensure monitor is in proper video mode  
Perform monitor reset on "Display Reset"  
Auto Adjust via OSD  
Perform monitor self-test feature check and determine if these  
lines are also in self-test mode  
Screen has one or more lines  
Check for bent or broken pins  
Perform monitor reset on "Display Reset"  
Auto Adjust via OSD  
Perform monitor self-test feature check to determine if scrambled  
screen appears in self-test mode  
Check for bent or broken pins  
Boot up in the "safe mode"  
Screen is scrambled or appears  
torn  
Do not perform any troubleshooting steps  
Monitor needs to be replaced  
Visible signs of smoke or sparks  
Monitor malfunctions on & off  
Ensure monitor is in proper video mode  
Ensure video cable connection to computer and to the flat panel is  
secure  
Perform monitor reset on "Factory Reset"  
Perform monitor self-test feature check to determine if the  
intermittent problem occurs in self-test mode  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Perform monitor self-test feature check  
Check connection integrity at both end of the video cable  
Check for bent or broken pins  
Picture missing color  
Picture color not good  
Change the color to "PC Custom Color" or "MAC Custom Color"  
Adjust R/G/B value of "PC Custom Color" or "MAC Custom Color"  
Change the Color Format to "PC RGB" or "YPbPr" (for Video/DVI-  
HD inputs)  
Use the Power Management feature to turn off the monitor at all  
times when not in use  
Alternatively, use a dynamically changing screen saver  
Faint shadow from the static image  
displayed appears on the screen  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. SERVICE INFORMATION  
7.1Product Registration and Customer Support  
Should you require any assistance with the installation or troubleshooting of the EVGA  
you’ll be able to download drivers, check out our extensive Knowledge Base, and submit  
technical and customer support inquiries. Be sure to visit the EVGA community message  
Contact our Customer Service through email to get all of your questions answered and  
problems resolved – it’s fast, it’s easy, and it works! If you require immediate assistance,  
please contact our Customer Service at 888.880.EVGA (3842).  
before contacting customer service:  
-Product Name & Part Number  
-UPC Number  
-Serial Number  
The EVGA Advanced RMA (EAR) Program is a program to protect yourself and your product  
in the case of product failure. For more details please visit: www.evga.com/EAR  
7.2Pixel Policy  
The EVGA monitor is evaluated on the number of acceptable non-performing pixels and the  
distance between each non-performing pixels. The terms “non-performing” and “defective  
pixels/sub-pixels” are used interchangeably for ease of identification. All monitors have been  
tested to ensure they comply with this standard.  
To identify non-performing pixels, the monitor shall be viewed under normal operating  
conditions, preferably in its native resolution, and from a normal viewing distance of at least  
50 cm (16 in.).  
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to  
become fixed in an unchanging state. The visible result is a fixed pixel that appears as an  
extremely tiny dark or bright discolored dot. When the pixel remains permanently lit, it is  
known as a “bright dot.” When the pixel remains black, it is known as a “dark dot.”  
In almost every case, these fixed pixels are hard to see and do not detract from display  
quality or usability. A display with 1 to 5 bright or dark dots is considered normal and within  
industry standards.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Your LCD display is subject to replacement if it meets the criteria outlined in the following  
table:  
Product Bright Dots Dark Dots Total Dots  
Combination of Bright  
and Dark = 6 or more  
InterView 6 or more  
6 or more  
7.3Warranty Terms and Conditions  
EVGA monitors are covered by a 3 Year limited warranty with registration within 30 days of  
the purchase date as stated on the terms and conditions. Please also note the model number,  
the serial number, the date of purchase, and keep a copy of the purchase invoice on hand.  
1. EVGA warrants that the monitor you have purchased is free from manufacturing defects in  
materials and workmanship when dispatched from our warehouse. The receipt of purchase shall  
be provided as proof of the date of purchase and the warranty period commences as of that date.  
2. The warranty service only covers the monitors which have been purchased in local country.  
3. Proof of purchase will be required in the event of any discrepancy.  
4. The warranty will not apply to any monitor purchased from a dealer/reseller other than an  
authorized EVGA dealer/reseller. The warranty automatically becomes void if the product has been  
physically damaged or rendered defective –  
(a) as a result of an accident, misuse, fire, lightning, malicious damage, water damage, abuse or  
other circumstances beyond EVGA’s control;  
(b) by the use of parts or peripherals not authorized by EVGA;  
(c) as a result of normal wear and tear;  
(d) by use in an improper operating environment;  
(e) by modification of the monitor;  
(f) by the serial number or product code sticker being removed or defaced;  
(g) as a result of a service rendered by anyone other than EVGA authorized service centre or its  
authorized service agents  
(h) as a result of the monitor not being operated in conformity with EVGA’s user manual.  
5. In all circumstances, the user must ensure that the monitor is packed in appropriate packing. Any  
damage due to improper packing will be chargeable to the customer.  
6. EVGA authorized service centre will be chargeable at current applicable hourly rates to the  
customer if –  
(a) the technician finds the problem is user related;  
(b) caused by change in normal settings of the monitor or caused by user computer (software,  
settings … etc);  
(c) determined to be causes not covered by this warranty and/or fallen within the scope as  
prescribed in item 5.  
7. The customer must ensure that they are available when the service centers’ representative arrives  
to pick up or deliver the monitor. Any additional visits made due to the customer’s unavailability  
will be chargeable to the customer or the customer can bring (or pick up) the monitor to (from)  
the service centers’ agent at their own cost.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8. Software related faults resulting from incorrect software installation or usage or software viruses  
or software inherent bugs shall not be considered as product faults and may incur a charge for  
rectification.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. COMPLIANCE INFORMATION  
8.1FCC Notice  
This device complies with FCC Rules Part 15, Operation is subject to the following two conditions:  
1)  
received, including interference that may cause undesired operation.  
2) This equipment has been tested and found to comply with the limits for a Class B digital device,  
This device may not cause harmful interference, and this device must accept any interference  
pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if  
not installed and used in accordance with the manufacturer’s instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that interference will not occur  
in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
1)  
2)  
Increase the separation between the equipment and signal source.  
Connect the equipment to an outlet on a circuit different from that to which the signal source is  
connected.  
3)  
4)  
Consult the dealer or an experienced computer technician for help.  
The use of shielded cables for connection of the monitor to the graphics card is required to  
ensure compliance with FCC regulations. Changes or modifications to this unit not expressly approved  
by the party responsible for compliance could void the user’s authority to operate this equipment.  
The following information is provided on the device or devices covered in this document in compliance  
with the FCC regulations:  
Product name: Dual Monitor System  
Model number: EVGA InterViewTM 1700  
Company name: EVGA® Corporation  
2900 Saturn Street, Suite B  
Brea, California, 92821 USA  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
9. LEGAL INFORMATION  
9.1Trademark Information  
1)  
2)  
EVGA Corp., EVGA, the EVGA logo and combinations,  
INTERVIEW and INTERVIEW in lower or cap combinations,  
thereof are trademarks of EVGA Corp. All brand names, company names, service marks, logos, and  
trademarks of the company, or its affiliates or licensors are trademarks or registered trademarks of  
the company or its subsidiaries, affiliates or licensors in the US and other countries. Other company,  
products and service names may be trademarks or service marks of others. EVGA reserves the right  
to terminate this license if there is a violation of its terms or default by the Original Purchaser. Upon  
termination, for any reason, all copies of Software and materials must be immediately returned to  
EVGA and the Original Purchaser shall be liable to EVGA CORP for any and all damages suffered as a  
result of the violation or default.  
9.2Software License Agreement  
This EVGA software (the “software”) is copyrighted by EVGA CORP and is protected by US law. All  
rights reserved. The purchaser is granted a license to use the software only, subject to the following  
restrictions and limitations:  
1)  
The license is for the original purchaser only, it is transferable so long as all items bundled with  
the software are transferred to the same individual as a sale (e.g. all software, manuals, hardware,  
etc.)  
2)  
The original purchaser may use the software on a single computer owned or leased by the  
original purchaser. You may not use the software on more than a single machine, even if you own or  
lease more than one machine, without the written consent of EVGA  
3)  
The original purchaser may make backup copies of the software for his or her own use only,  
subject to the use limitations of this license. The original purchaser may not engage in, nor permit  
third parties to engage in, any of the following:  
- Providing or disclosing the software to third parties  
- Providing use of the software in a computer service business, network, time-sharing network  
- Making alterations or copies of any kind in the software (except as permitted above)  
- Attempting to un-assemble, de-compile or reverse engineer the software in any way  
- Granting sublicenses, leases, or rights in the software to others  
- Making copies, or verbal or media translations, of the user’s guide  
- Making telecommunication data transmissions of the software  
9.3Rights  
ALL MATERIAL INCLUDING BUT NOT LIMITED TO, TEXT, DATA, DESIGN SPECIFICATIONS, DIAGNOSTICS, GRAPHICS, LOGOS, REFERENCE  
BOARDS, FILES, IMAGES, DRAWINGS, AND SOFTWARE INCLUDING THIS DOCUMENT AND THE SOFTWARE ITSELF (TOGETHER AND  
SEPARATELY) IS OWNED, CONTROLLED BY, LICENSED TO, OR USED WITH PERMISSION BY COMPANY AND IS PROTECTED BY  
COPYRIGHT, TRADEMARK, AND OTHER INTELLECTUAL PROPERTY RIGHTS. ALL IS BEING PROVIDED “AS IS”, EVGA CORPORATION MAKES  
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE WITH RESPECT TO THE MATERIALS AND EXPRESSLY  
DISCLAIMS ALL IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. IN NO  
EVENT SHALL THE LIABILITY OF EVGA CORPORATION FOR CLAIMS ARISING FROM THE USE OF THE MATERIALS BY ANYONE EXCEED  
THE ORIGINAL PURCHASE PRICE OF THE MATERIALS (OR REPLACEMENT OF THE MATERIALS AT EVGA CORPORATION’S OPTION). ALL  
INFORMATION FURNISHED IS BELIEVED TO BE ACCURATE AND RELIABLE. HOWEVER, EVGA CORPORATION ASSUMES NO  
RESPONSIBILITY FOR THE CONSEQUENCES OF USE OF SUCH INFORMATION OR FOR ANY INFRINGEMENT OF PATENTS OR OTHER  
RIGHTS OF THIRD PARTIES THAT MAY RESULT FROM ITS USE, OR USE OF THE SOFTWARE. NO LICENSE IS GRANTED BY IMPLICATION  
OR OTHERWISE UNDER ANY PATENT OR PATENT RIGHTS OF EVGA CORPORATION EXCEPT AS EXPRESSLY PROVIDED HEREIN. ALL  
SPECIFICATIONS MENTIONED IN THIS PUBLICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Clover Electronics Security Camera RD5354 User Manual
Cooper Lighting Indoor Furnishings C600EL User Manual
Craftsman Pressure Washer MGP 769010 User Manual
Craftsman Snow Blower 486248381 User Manual
Crown Microphone PZM 6D User Manual
Digi Switch Hubport 4 User Manual
Dynex Camera Accessories DX NW080 User Manual
Dynex CRT Television DX R13TV User Manual
Everpure Water System QL2 OW200L User Manual
GE Air Conditioner AGF05 User Manual