Dynex TV Mount DX DRTVL103 User Manual

ASSEMBLY INSTRUCTIONS  
DX-DRTVL103  
Large Low Profile Wall Mount with Optional -5° Tilt  
Safety information and  
specifications...........................................2  
TVs the wall mount fits ........................3  
Tools needed ...........................................3  
Parts............................................................4  
Hardware...................................................5  
For wood-stud, concrete-wall, or  
concrete-bloack installation  
Assembly instructions..........................6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DX-DRTVL103  
3
TVs the wall mount fits  
The wall mount fits TVs with M4, M5, M6, or M8 screw holes that are the following distances apart:  
1.375" to 15.748" (35 mm to 400 mm)  
maximum horizontal distance  
Tools needed  
You will need the following tools to assemble your new wall mount:  
Edge-to-edge stud finder  
Pencil  
Tape measure  
Hammer  
Level  
Phillips screwdriver  
Socket wrench with 1/2" (13 mm)  
socket or adjustable wrench  
OR  
3/8" (10 mm) masonry  
drill bit for concrete wall  
7/32" (5.5 mm) wood drill  
bit for wood stud wall  
Drill  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4
DX-DRTVL103  
Parts  
Package contents: parts  
Make sure you have all the parts necessary to assemble your new TV wall mount:  
01 Wall plate (1)  
02 Left TV 03 Right TV  
bracket (1) bracket (1)  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DX-DRTVL103  
5
Hardware  
Package contents: hardware  
Note: Not all hardware will be used.  
Make sure you have all the hardware necessary to assemble your new wall mount:  
Label  
Hardware  
Qty.  
Label  
Hardware  
Qty.  
M6 × 35 mm  
screw  
13  
4
04  
4
5/16" × 2 3/4" lag bolt  
(7.9 mm × 69.9 mm)  
M8 × 16 mm  
screw  
14  
15  
4
4
5/16"(7.9 mm)  
washer  
05  
06  
4
4
M8 × 40 mm  
screw  
Concrete anchor  
16  
17  
4
8
M8 × 60 mm screw  
M4/M5 washer  
07  
08  
09  
4
4
4
M4 × 12 mm screw  
M4 × 30 mm  
screw  
M5 × 12 mm screw  
18  
19  
4
4
M6/M8 washer  
M4/M5 spacer  
M5 × 30 mm  
screw  
10  
11  
12  
4
4
4
M6 × 12 mm screw  
M6 × 20 mm screw  
20  
4
M6/M8 spacer  
1
2
3
4in  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100mm  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
DX-DRTVL103  
Assembly instructions  
Step 1: Adjust the tilt  
Note: The tilt on the left TV bracket (02) and right TV bracket (03) must be the same.  
1
2
Use a Phillips screwdriver to remove the two screws (S) from the outside edges of each TV bracket (02 and 03).  
To tilt the TV forward by 5°, push the tilt brackets on the left TV bracket (02) and right TV bracket (03) down.  
OR  
To keep the TV completely vertical, push tilt brackets on the left TV bracket (02) and right TV bracket (03) up.  
Re-insert the two tilt screws (S) into each TV bracket (02 and 03), then tighten the screws.  
Caution: Do not over tighten the screws.  
3
Option 1: Mount tilted -5°  
&
Tilt  
bracket  
&
&
02 03  
02 03  
S
S
Option 2: Mount not tilted  
&
Tilt bracket  
02 & 03  
02 & 03  
S
S
You’ll need:  
Phillips screwdriver  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DX-DRTVL103  
7
Step 2: Determine whether your TV has a flat back or an irregular or obstructed back  
1
2
Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and  
scratches.  
If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for  
instructions.  
3
Align the screw holes in the brackets with the mounting screw holes on your TV. Position the brackets so they do  
not extend above or below your TV and do not cover any connectors or jacks. Make note of which bracket screw  
holes you will use.  
If the brackets lay flush against the back of your TV and do not block any jacks, your TV has a flat back.  
If there is a gap between a bracket and some part of the back of your TV, your TV has an irregularly-shaped back.  
If a bracket blocks any jacks, your TV has an obstructed back. In either case, you need spacers.  
Flat back (no spacers needed)  
Obstructed back (spacers needed)  
Irregular back (spacers needed)  
4
Remove the brackets.  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
DX-DRTVL103  
Step 3: Select screws and spacers  
1
Select the hardware for your TV (screws, washers, and spacers). See the documentation that came with your TV  
for screw length and diameter.  
Select one of the following types of screws:  
M4 × 12 mm screws (07)  
M4 × 30 mm screws (08)  
M5 × 12 mm screws (09)  
M5 × 30 mm screws (10)  
M6 × 12 mm screws (11)  
M6 × 20 mm screws (12)  
M6 × 35 mm screws (13)  
M8 × 16 mm screws (14)  
M8 × 40 mm screws (15)  
M8 × 60 mm screws (16)  
Select one of the following types of washers:  
M4/M5 washers (17)  
M6/M8 washers (18)  
For an irregular or obstructed TV back, select one of the following types of spacers:  
M4/M5 spacers (19) M6/M8 spacers (20)  
2
Hand thread screws into the threaded screw holes on the back of your TV to determine the correct screw  
diameter and length. If your TV has an irregular or obstructed back, place a spacer between your TV back and the  
screw to make sure you have the correct length.  
your TV. If you encounter resistance, stop immediately and contact  
your TV. However, using a screw that is too short may cause your TV  
to fall from the mount.  
Screw is  
too long  
Screw fits  
correctly  
Screw is  
too short  
3
Remove the screws.  
For a flat back TV, go to “Step 4: Install the TV brackets Option 1: Installing for a TV with a flat back” on  
page 9.  
For an irregular or obstructed back, go to “Step 4: Install the TV brackets (continued) Option 2: Installing  
for a TV with an irregular or obstructed back” on page 10.  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DX-DRTVL103  
9
Step 4: Install the TV brackets  
Option 1: Installing for a TV with a flat back  
1
Align the holes you noted on the left TV bracket (02) and right TV bracket (03) with the screw holes on the back  
of your TV. The brackets are marked “R” for the right bracket and “L” for the left bracket.  
2
Place the M4/M5 washers (17) or M6/M8 washers (18) over the holes in the TV brackets that align with the screw  
holes on the back of your TV, then insert the M4 screws (07), M5 screws (09), M6 screws (11 or 12) or  
M8 screws (14).  
3
Tighten the screws until they are snug against the TV bracket. Do not over tighten.  
03  
02  
&
02  
03  
7
9
OR  
11  
14  
12  
OR  
17  
18  
You’ll need:  
Screws  
Washers  
OR  
OR  
OR  
OR  
11 (4)  
OR  
07 (4)  
09 (4)  
14 (4)  
17 (4)  
18 (4)  
Phillips screwdriver  
12 (4)  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
10  
DX-DRTVL103  
Step 4: Install the TV brackets (continued)  
Option 2: Installing for a TV with an irregular or obstructed back  
1
2
3
Place M4/M5 spacers (19) or M6/M8 spacers (20) over the mounting holes in the back of your TV.  
If you are using M4 or M5 screws, place M4/M5 washers (17) over the spacers.  
Align the holes you noted on the left TV bracket (02) and right TV bracket (03) with the spacers. The brackets are  
marked “R” for the right bracket and “L” for the left bracket.  
4
5
Place M4/M5 washers (17) or M6/M8 washers (18) over the holes in the TV brackets, then insert M4 screws (08),  
M5 screws (10), M6 screws (13), or M8 screws (15 or 16).  
Tighten the screws until they are snug against the TV bracket. Do not over tighten.  
03  
02  
OR  
17  
18  
OR  
19  
20  
02  
17  
03  
8
10 13  
OR  
15  
16  
&
You’ll need:  
Screws  
Washers  
Spacers  
15 (4)  
OR  
OR  
OR  
OR  
08 (4)  
10 (4)  
13 (4)  
17 (8)  
19 (4)  
OR  
OR  
16 (4)  
20 (4)  
Phillips screwdriver  
18 (4)  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DX-DRTVL103  
11  
Step 5: Determine the wall-mount location.  
Note: For help with determining where you need to drill screw holes, use the HeightFinder™ Installation Assistant at:  
The center of your TV will match the center of the wall plate (01). Before you drill holes in the wall:  
1
Measure the distance between the middle of one of the TV brackets and the bottom of your TV. This  
measurement is A.  
2
If you plan to place furniture (such as an entertainment center or TV stand) under your TV, measure the height of  
the furniture and any items on top of the furniture. This measurement is B.  
3
4
5
Measure the distance between the top of the furniture and where you want the bottom of your TV. This  
measurement is C.  
Add A + B + C. The total measurement is the height where you want the center of the wall plate (01) to be on the  
wall.  
Use a pencil to mark this spot on the wall.  
A
C
B
You’ll need:  
Measuring tape  
Pencil  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
DX-DRTVL103  
Step 6: Mount the wall plate  
Note: Any material covering the wall (such as sheetrock) must not exceed 5/8" (16 mm).  
Option 1: Mounting on a wood-stud wall  
1
Locate the studs. Verify the center of the stud with an edge-to-edge stud finder.  
2
At the wall height you determined in the previous step, align the wall plate (01) against the wall and make sure  
that it is level. Use a pencil to mark the screw hole locations, then remove the wall plate.  
3
4
Drill pilot holes to a depth of 3" (75 mm) using a 7/32" (5.5 mm) diameter drill bit.  
Align the wall plate with the pilot holes, then place the washers (05) over the holes in the wall plate. Insert the lag  
bolts (04) through the washers, then tighten the lag bolts only until the washers are pulled firmly against the wall  
plate.  
Caution: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts (04).  
01  
16"  
(406 mm  
< 5/8"  
(16 mm)  
01  
3" (75 mm)  
05  
04  
You’ll need:  
05 (4)  
04 (4)  
Stud  
finder  
Pencil  
Level  
Drill  
7/32" (5.5 mm) Socket wrench with  
wood drill  
1/2" (13 mm) socket  
or adjustable wrench  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DX-DRTVL103  
13  
Step 6: Mount the wall plate (continued)  
Note: Any material covering the wall (such as sheetrock) must not exceed 5/8" (16 mm).  
Option 2: Mounting on a solid concrete or concrete block wall  
1
2
3
Level the wall plate (01) and mark the hole locations.  
Drill pilot holes to a depth of 3" (75 mm) using a 3/8 in. (10 mm) diameter masonry drill bit.  
Insert concrete wall anchors (06) into the pilot holes and make sure that the anchors are seated flush with the  
concrete surface.  
4
Align the wall plate with the anchors. Place washers (05) over the screw holes in the wall plate, insert  
lag bolts (04) through the washers, then tighten the lag bolts only until the washers are pulled firmly against the  
wall plate.  
Warning: Avoid potential injuries or property damage. DO NOT over-tighten the lag bolts (04).  
3" (75 mm)  
< 5/8"  
(16 mm)  
01  
Never drill into  
the mortar  
between blocks.  
06  
01  
06  
06  
05  
04  
You’ll need:  
06 (4)  
Pencil  
05 (4)  
04 (4)  
Drill  
3/8" (10 mm)  
masonry drill  
bit  
Hammer  
Socket wrench with  
1/2" (13 mm) socket  
or adjustable wrench  
Level  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
DX-DRTVL103  
Step 7: Mount the TV on the wall plate  
Lower the TV onto the wall plate (01) making sure that the hooks on the top of the left and right  
TV brackets (02 and 03) slide over the top of the wall plate and the hooks on the bottom of the TV brackets slide under  
the bottom of the wall plate. Make sure that the TV is securely attached to the wall plate.  
03  
01  
The TV is heavy. You  
will need assistance  
with this step.  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DX-DRTVL103  
15  
Removing the TV from the wall plate  
Simultaneously pull down on the two release cords on the TV brackets (02 and 03), then lift the TV up and away from  
the wall plate.  
For customer service, call: 800-305-2204 (U.S./Canada markets)  
Need help? Call 800-305-2204  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.  
© 2011 BBY Solutions, Inc.  
All rights reserved.  
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and  
brand names are trademarks of their respective owners.  
6907-002034 <01>  
12-0662  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cortelco Telephone CENTURION EXTENDED BASIC TELEPHONE User Manual
Craftsman Air Compressor 919176730 User Manual
Craftsman Lawn Mower 10728993 User Manual
Cuisinart Beverage Dispenser SMS 201 User Manual
Cypress Computer Hardware 7C185 15 User Manual
Desa Portable Generator Rgh3000 Rgh3000pr Rgh5500a Rgh5500aie Rgh7500aie And Rgh11000aie User Manual
Ducane Air Conditioner RGE13 User Manual
Everpure Water System EV9273 91 User Manual
Franke Consumer Products Ventilation Hood FGL 6015 XS User Manual
Gefen Cable Box EXT DVI 141B User Manual