Dynex Desktop Microphone • DX-54
Microphone de bureau Dynex
Micrófono de escritorio Dynex
Using the microphone
Installing your microphone
To install your microphone
Plug the pink connector into the corresponding
port on your computer.
Sound card
or other sources
Testing your microphone
To test your microphone
1. Plug in your microphone.
2. Start the Sound Recorder application (Click Start, then select All Programs, Accessories,
Entertainment).
3. Click Record and speak into the microphone for 5–10 seconds.
4. Click Stop, then Play. If you can hear your recording through through your computer’s speakers, the
microphone is working correctly.
Troubleshooting
If your microphone does not function correctly, try the following:
• Make sure your microphone is properly plugged into the correct port.
• Make sure the volume is set to a medium level, and is not muted.
Legal notices
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
ICES - Canada’s Interference-Causing Equipment Standards This equipment complies with the applicable technical
standards of ICES 003:1997 in accordance with the measurement procedures specified in CISPR22-96.
Copyright © 2007 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services, Inc. Other brands
and product names are trademarks or registered trademarks of their respective holders. Specifications and features are
subject to change without notice or obligation.
One Year Limited Warranty
Utilisation du microphone
Installation du microphone
Pour installer le microphone
Branchez le connecteur rose sur le port
correspondant de l’ordinateur.
Carte son ou
autres sources
Test du microphone
Pour tester le microphone
1. Branchez le microphone.
2. Démarrez l’application Sound Recorder [Magnétophone] (Cliquez sur Start [Démarrer] puis
sélectionnez All Programs [Tous les programmes], Accessories [Accessoires], Entertainment
[Divertissement]).
3. Cliquez sur Record (Enregistrer) et parlez dans le microphone pendant cinq à 10 secondes.
4. Cliquez sur Stop (Arrêter) puis sur Play (Lecture). Si vous pouvez entendre votre enregistrement à
travers les haut-parleurs de l’ordinateur, le microphone fonctionne correctement.
Problèmes et solutions
Si votre microphone ne fonctionne pas correctement, essayez ce qui suit :
•
•
Vérifiez que le microphone est connecté au port correspondant.
Vérifiez que le volume est réglé sur un niveau moyen et n’est pas mis en sourdine.
Quick Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide d’installation rapide • Guía de instalación rápida
|