Dynex Flat Panel Television DX 19LD150A11 User Manual
19” LCD TV/DVD combo  
DX-19LD150A11  
USER GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Setting power on vivid mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Adjusting the computer image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Selecting the sound mode or audio language . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Adjusting the sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Playing TV audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Automatically scanning for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Hiding channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Setting up a favorite channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Viewing a favorite channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Adding or changing a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Checking the digital signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Setting or changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Setting parental control levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Blocking unrated TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Viewing blocked content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Locking control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Downloading rating information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Setting DVD locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Using closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Turning closed captioning on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Selecting the closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Customizing digital closed captioning styles . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Manually setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Selecting the menu language and transparency . . . . . . . . . . . . . . . . . . . . . . . 34  
Labeling an input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Restoring default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Restoring default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Care and handling of discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Disc playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
USB photo display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
Programming universal remote controls . . . . . . . . . . . . . . . . . . . . . .41  
Programming a different universal remote control . . . . . . . . . . . . . . . . . . . . 41  
For additional help and information… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Common universal remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
One-year limited warranty - Dynex Televisions . . . . . . . . . . . . . . . .43  
US and Canada Market . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Definitions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
How long does the coverage last? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
What does this warranty cover? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
How to obtain warranty service? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Where is the warranty valid? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
What does the warranty not cover? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
CHILD SAFETY  
It makes a difference how and where you use  
your flat panel display  
As you enjoy your new product, keep these  
safety tips in mind  
The issue  
The home theater entertainment experience is a growing trend, and larger TVs are popular  
purchases. However, TVs are not always supported on the proper stands or installed  
according to the manufacturer’s recommendations. We and the consumer electronics  
industry are committed to making home entertainment enjoyable and safe.  
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,  
chests, or carts may fall over and cause injury.  
Tune into safety  
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand  
rated for the weight of your TV.  
Carefully read and understand all enclosed instructions for  
proper use of this product.  
Don’t let children climb on or play with entertainment system  
furniture and TVs.  
Don’t place TVs on furniture that can easily be used as  
steps, such as a crate or chest of drawers.  
Remember that children can become excited while watching  
a program, especially on a “larger-than-life” TV. Make sure  
that you place or install the TV where it cannot be pushed,  
pulled over, or knocked down.  
•
Make sure that you route all cords and cables so that they  
cannot be pulled or grabbed by curious children.  
Wall mounting  
If you decide to wall mount your TV, always remember:  
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your  
TV and that has been recommended by this TV manufacturer, listed in this manual, or  
otherwise listed by an independent laboratory as suitable for your TV.  
•
•
Follow all instructions supplied by the TV and wall mount manufacturers.  
If you have any doubts about your ability to safely wall mount your TV, get help from a  
professional installer.  
•
Make sure that the wall where you are mounting the TV is  
appropriate. Some wall mounts are not designed to be mounted  
to walls backed with steel studs or cinder blocks. If you are  
unsure, ask a professional installer.  
•
TVs can be heavy. At least two people are required for safe wall mount installation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
DX-19LD150A11  
Important safety instructions  
16 An apparatus with three-prong, grounding-type  
plug is a Class I apparatus, which needs to be  
grounded to prevent possible electric shock. Make  
sure that you connect the Class I apparatus to a  
grounding-type, three-prong outlet.  
17 Remote control batteries should not be exposed to  
excessive heat such as sunshine, fire, or the like.  
18 The apparatus should not be exposed to dripping or  
splashing, and no objects filled with liquids, such as  
vases, should be placed on the apparatus.  
Important safety instructions  
CAUTION  
RISK OF ELECTRIC  
SHOCK  
DO NOT OPEN  
This symbol indicates that dangerous  
voltage constituting a risk of electric  
shock is present within your TV/DVD  
combo. This label is located on the  
back of your TV/DVD combo.  
Warnings  
Electric shock hazard  
To reduce the risk of fire or electric shock, do not remove  
any cover or expose the device to rain or moisture. No  
user-serviceable parts are inside. Refer servicing to  
qualified service technicians.  
This symbol indicates that there are  
important operating and maintenance  
instructions in the literature  
accompanying your TV/DVD combo.  
1 Read these instructions.  
2 Keep these instructions.  
3 Heed all warnings.  
4 Follow all instructions.  
5 Do not use this apparatus near water.  
6 Clean only with a dry cloth.  
Lightning  
For added protection for your device receiver during a  
lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the power outlet  
and disconnect any antenna or cable system. This helps  
prevent property damage and personal injury from  
lightning and power line surges.  
7 Do not block any ventilation openings. Install in  
accordance with the manufacturer's instructions.  
8 Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9 Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding  
type plug has two blades and a third grounding  
prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does  
not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10 Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the  
apparatus.  
11 Only use attachments/accessories specified by the  
manufacturer.  
12 Use only with a cart, stand, tripod,  
bracket, or table specified by the  
manufacturer, or sold with the  
apparatus. When a cart is used, use  
caution when moving the  
cart/apparatus combination to avoid injury from  
tip-over.  
13 Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
14 Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has  
been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
Power lines  
An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light or  
power circuits, or where it can fall into such power lines or  
circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such  
power lines or circuits as contact with them might be  
fatal.  
Handling the LCD panel  
• Your TV/DVD combo’s screen is made of glass. Do  
not drop your TV/DVD combo or hit, jolt, or press  
hard against the LCD panel. If the screen breaks, be  
careful of broken glass.  
• If the LCD panel is broken, make absolutely sure that  
you do not touch the liquid in the panel. This may  
cause skin inflammation.  
• If the liquid gets in your mouth, immediately gargle,  
rinse, and consult with your doctor. Also, if the liquid  
gets in your eyes or touches your skin, consult with  
your doctor after rinsing for at least 15 minutes or  
longer in clean water.  
Replacement parts  
When replacement parts are required, make sure that the  
service technician uses replacement parts specified by  
the manufacturer that have the same characteristics as  
the original part. Unauthorized substitutions may result in  
fire, electric shock, personal injury, or other hazards.  
Safety check  
After completing any service or repair to this device, ask  
the service technician to perform routine safety checks to  
determine that your TV/DVD combo is in correct  
operating condition.  
15 The wall plug is the disconnecting device. The plug  
must remain readily operable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3
Important safety instructions  
DX-19LD150A11  
Power source  
Note to CATV system installer  
Operate your TV/DVD combo only from the type of power  
source indicated on the marking label. If you are not sure  
of the type of power supplied to your home, consult an  
electrician or your local power company.  
Article 820 of the National Electrical Code, ANSI/NFPA No.  
40 provides guidance for correct grounding. Specifically,  
it states that the cable ground must be connected to the  
grounding system of the building as close to the point of  
cable entry as practical.  
Cautions  
Condensation  
Damage requiring service  
Moisture will form on the TV/DVD combo if the TV/DVD  
combo is brought from cool surroundings into a warm  
room or if the temperature of the room rises suddenly.  
When this happens, the TV/DVD combo's performance  
may be impaired. To prevent this, let the TV/DVD combo  
stand in its new surroundings for about an hour before  
switching it on, or make sure that the room temperature  
rises gradually.  
Condensation may also form during the summer if the  
TV/DVD combo is exposed to the breeze from an air  
conditioner. In such cases, change the location of the  
TV/DVD combo.  
Unplug this TV/DVD combo from the power outlet and  
refer servicing to qualified service personnel under the  
following conditions:  
• When the power supply cord or plug is damaged or  
frayed.  
• If liquid has been spilled or objects have fallen into  
your TV/DVD combo.  
• If your TV/DVD combo has been exposed to rain or  
water.  
• If your TV/DVD combo does not operate normally by  
following the operating instructions. Adjust only  
those controls that are covered by the operating  
instructions because incorrect adjustment of other  
controls may result in damage and will often require  
extensive work by a qualified technician to restore  
your TV/DVD combo to its normal operation.  
• If your TV/DVD combo has been dropped or  
damaged in any way.  
Mobile telephone warning  
To avoid interference with your TV picture and sound,  
operating problems, or even damage, keep your cordless  
and cellular telephones away from the TV/DVD combo.  
End of life directives  
• When your TV/DVD combo exhibits a distinct  
change in performance.  
Your TV/DVD combo contains tin-lead solder and a  
fluorescent lamp containing a small amount of mercury.  
Disposal of these materials may be regulated for  
environmental reasons. Your TV/DVD combo also  
contains material that can be recycled and reused. For  
disposal or recycling information, contact your local  
authorities or the Electronic Industries Alliance at  
www.eia.org to find a recycler in your area.  
Outdoor antenna grounding  
If an outside antenna or cable system is connected to  
your TV/DVD combo, make sure that the antenna or cable  
system is grounded to provide some protection against  
voltage surges and built-up static charges. Article 810 of  
the National Electrical Code, ANSI/NFPA No. 70, provides  
information with respect to correct grounding of the mast  
and supporting structure, grounding of the lead-in wire  
to an antenna discharge unit, size of grounding  
Non-active pixels  
The LCD panel contains almost 3 million thin film  
transistors, which provide exceptionally sharp video  
quality. Occasionally, a few non-active pixels may appear  
on the screen as a fixed blue, green, or red point. These  
non-active pixels do not adversely affect the performance  
of your TV/DVD combo, and are not considered defects.  
conductors, location of the antenna-discharge unit,  
connection to grounding electrodes, and requirements  
for the grounding electrode.  
1
2
3
4
5
7
6
1
2
3
4
5
Antenna lead-in wire  
Grounding clamp  
Antenna discharge unit  
Grounding conductors  
Ground clamps  
Power service grounding  
electrode system  
6
7
Electric service equipment  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
DX-19LD150A11  
Installing the stand or wall-mount bracket  
3 Attach the wall-mount bracket to your TV/DVD  
combo using the mounting holes on the back of  
your TV/DVD combo. See the instructions that came  
with the wall-mount bracket for information about  
how to correctly hang your TV/DVD combo.  
Installing the stand or  
wall-mount bracket  
Notes  
Note  
•
•
If you plan to wall-mount your TV/DVD combo,  
do not install the stand.  
The length of the wall-mount screws vary depending  
on the wall-mount bracket you purchased. See the  
instructions that came with the wall-mount bracket  
for screw lengths.  
Store the stand and stand screws in case you  
decide to use the stand in the future.  
Installing the stand  
To install the stand:  
1 Carefully place your TV/DVD combo screen  
face-down on a cushioned, clean surface to protect  
the screen from damage and scratches.  
2 Align the screw holes on the stand with the holes on  
the bottom edge of the TV/DVD combo.  
PC/DVI  
AUDIO IN  
PB  
PR  
TV/DVD combo components  
Package contents  
3 Secure the stand to the TV/DVD combo with the two  
• AC power cord  
• Remote control and batteries (2 AAA)  
• Stand with screws  
screws (provided).  
• Component video cable  
• Audio cable  
• Quick Setup Guide  
Front  
Installing a wall-mount bracket  
Warning  
This apparatus is intended to be supported by a UL  
Listed wall mount bracket.  
To attach your TV/DVD combo to a wall-mount bracket:  
1 Carefully place your TV/DVD combo screen  
face-down on a cushioned, clean surface to protect  
the screen from damage and scratches.  
2 Remove the two screws that secure the stand to the  
TV/DVD combo, then remove the stand.  
#
Item  
Description  
Receives the signals from the remote  
control. Do not block.  
1
Remote sensor  
Turns on when your TV/DVD combo is  
turned on.  
Lights red when your TV/DVD combo is in  
standby mode.  
2
Power indicator  
For more information, see “Turning your  
TV/DVD combo on or off” on page 17.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
5
TV/DVD combo components  
DX-19LD150A11  
Back  
Side  
PB  
PR  
#
Item  
Description  
Insert a disc (DVD or CD) into this slot  
to change mode and begin playback.  
1
Disc slot  
MENU  
EJECT  
#
Item  
Description  
Press to open the on-screen menu.  
For more information, see  
“Navigating the menus” on page 20.  
1
AC IN  
Connect the supplied power cord here.  
2
3
Connect an antenna or cable TV to this jack. For  
2
3
ANT/CABLE IN more information, see “Connecting an antenna  
or cable TV (no box)” on page 10.  
Press to eject the disc from the disc  
slot.  
Connect the video and audio cables for a  
COMPONENT IN  
Video - Y, PB, PR  
Audio - L and R  
VIDEO IN  
S-VIDEO and  
VIDEO  
In DVD mode, press to stop playback.  
In TV mode, press to go to the  
previous channel in the channel list.  
component video device to these jacks. For  
4
5
STOP / CHANNEL  
more information, see “Connecting a VCR or  
DVD player” on page 11.  
In DVD mode, press to begin or  
resume playback.  
In TV mode, press to go to the next  
channel in the channel list.  
Connect the video cable for an AV device to  
one of these jacks. Connect the audio cables to  
the COMPONENT IN L and R jacks. For more  
information, see “Connecting a VCR” on  
page 12, or see "Connecting a VCR or DVD  
player" on page 11.  
PLAY / CHANNEL  
VOLUME –/+  
INPUT  
4
Press to decrease or increase the  
volume.  
Audio - L and R  
6
7
Connect the video cable for a computer to this  
jack. For more information, see “Connecting a  
computer” on page 13.  
Press to open the INPUT SOURCE list  
and select a video input source. For  
more information, see “Selecting the  
video input source” on page 17.  
5
6
VGA  
Connect the audio cable for a computer or a  
DVI device to this jack. For more information,  
see “Connecting a computer” on page 13 or  
“Connecting a DVD or Blu-ray player” on  
page 11.  
Press to turn your TV/DVD combo on  
or off (standby mode). When your  
TV/DVD combo is in standby mode,  
power still flows through it. To  
completely disconnect power,  
unplug the power cord.  
PC/DVI AUDIO  
IN  
8
(Power)  
Connect HDMI devices to these jacks. An HDMI  
cable carries both video and sound. You do not  
7
HDMI1/HDMI2 need to make an audio connection for an HDMI  
device. For more information, see “Connecting  
a DVD or Blu-ray player” on page 11.  
OUT L, R  
(analog audio  
out)  
Connect an analog sound system to these  
jacks. For more information, see “Using analog  
audio” on page 15.  
8
9
Connect a digital audio amplifier cable to this  
jack. For more information, see “Using digital  
audio” on page 15.  
SPDIF OUT  
Connect headphones to this jack. For more  
information, see “Connecting headphones” on  
page 14.  
10 PHONE OUT  
11 USB IN  
Plug a USB device, such as a flash drive, into  
this jack. For more information, see  
“Connecting a USB flash drive” on page 14.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
6
DX-19LD150A11  
TV/DVD combo components  
Remote control  
#
Button  
Description  
Press to open the Favorites channel list. For  
more information, see “Setting up a favorite  
channel list” on page 25 and “Viewing a favorite  
channel” on page 26.  
11 FAV  
Press TITLE to open a DVD title menu, if  
available. For more information, see “Using the  
DVD player” on page 17.  
Press DVD MENU to open a DVD menu, if  
available. For more information, see “Using the  
DVD player” on page 17.  
Press (Eject) to eject the disc from the disc  
slot.  
Press  
(Play/Pause) once to begin playback.  
Press again to pause playback. Press once again  
to resume playback.  
Press (Skip back) to skip back to the previous  
title or track on a DVD or CD.  
Press  
or CD.  
(Fast reverse) to fast reverse on a DVD  
12 DVD controls  
Press REPEAT to select the repeat mode on a  
DVD or CD. You can select Chapter, Title, or All  
for a DVD, or Track and All for a CD.  
Press A-B to create a playback loop for a disc.  
Press SUBTITLE to change the subtitle  
language.  
Press STOP to stop playback on a DVD or CD.  
Press  
(Skip forward) to skip forward to the  
next title or track on a DVD or CD.  
Press (Fast forward) to fast forward on a DVD  
or CD.  
For more information, see “Using the DVD  
player” on page 17.  
#
Button  
Description  
Press to mute the sound. Press again to restore  
the sound.  
13  
14  
(Mute)  
Press to turn your TV/DVD combo on or off  
(Standby mode). When your TV/DVD combo is  
off, power still flows into it. To disconnect  
power, unplug the power cord.  
Press to go to the last viewed channel.  
RECALL  
1
(Power)  
Press to go to the next or previous channel in  
the channel list. For more information, see  
“Selecting a channel” on page 20.  
15 CH ꢀ / CH ꢁ  
Press to enter channel numbers and the  
parental control password.  
2
3
Numbers  
– (Dash)  
Press to display TV status information, such as  
the channel number, channel name (if  
available), or audio information. For more  
information, see “Viewing channel information”  
on page 20.  
Press to enter a digital sub-channel number.  
For more information, see “Selecting a channel”  
on page 20.  
16  
INFO  
Press to display the program guide. For more  
information, see “Viewing channel information”  
on page 20.  
4
5
GUIDE  
17 EXIT  
18 SAP  
Press to close the on-screen menu.  
In digital TV mode, press to select the audio  
track (language). In analog TV mode, press to  
select Stereo, Mono, or SAP. For more  
information, see “Selecting the sound mode or  
audio language” on page 23.  
VOL+/VOL–  
Press to increase or decrease the volume.  
Press ENTER to confirm selections or changes.  
Press arrow keys to navigate through the  
on-screen menus and adjust settings.  
ENTER  
ꢀ ꢁ ꢂ ꢃ  
6
7
Press to open the INPUT SOURCE list and select a  
video input source. For more information, see  
“Selecting the video input source” on page 17.  
MENU  
AUDIO  
Press to open the on-screen menu.  
19 INPUT  
Press to select an audio mode. You can select  
Standard, Theater, Music, News, or Custom.  
For more information, see “Adjusting the sound  
settings” on page 23.  
Press to change how the picture displays on the  
screen. For more information, see “Adjusting  
the TV picture” on page 21.  
8
20  
ZOOM  
Press to turn closed captioning on or off. You  
can select CC Off, CC On, or CC On Mute. For  
more information, see “Turning closed  
captioning on or off” on page 31.  
Press to select the picture mode. You can select  
Vivid, Standard, Energy Savings, Theater,  
Sports, or Custom. For more information, see  
“Adjusting the TV picture” on page 21.  
21 CCD  
9
PICT  
Press to set the sleep timer. For more  
information, see “Setting the sleep timer” on  
page 34.  
10  
SLEEP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7
Making connections  
DX-19LD150A11  
Making connections  
Connection  
type and jack  
Cable connectors  
What connection should I use?  
Your TV/DVD combo has several connection types for  
connecting devices to your TV/DVD combo.  
For the best video quality, you should connect a device to  
the best available connection.  
Digital optical  
audio (SPDIF)  
Use the following tables to identify cables:  
Connection  
type and jack quality  
Video  
Cable connector  
Red  
White  
HDMI  
video/audio  
Analog audio  
Best (use this  
if your  
devices have  
HDMI)  
Red  
Blue  
VGA  
(computer)  
video and  
audio  
Component  
video(requires  
an audio  
Green  
Better than  
composite,  
or coaxial  
connection)  
S-Video  
(requires an  
audio  
You can use the HDMI1 jack to connect a DVI device to  
your TV/DVD combo. You need to attach an HDMI-to-DVI  
adapter to the end of the HDMI cable that connects to the  
DVI device. For more information, see “Connecting a DVD  
or Blu-ray player” on page 11.  
Better than  
composite or  
coaxial  
connection)  
Cautions  
•
Check the jacks for position and type before  
making any connections.  
Loose connections can result in image or color  
problems. Make sure that all connections are  
tight and secure.  
Yellow  
•
Composite  
video(requires  
an audio  
•
•
The external audio/video equipment shown  
may be different from your equipment. If you  
have questions, refer to the documentation that  
came with your equipment.  
Always unplug the power cord when  
connecting external equipment.  
connection)  
Better than  
coaxial  
Coaxial  
video/audio  
Good  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
8
DX-19LD150A11  
Making connections  
6 To watch TV, press INPUT to open the INPUT SOURCE  
list, then press INPUT repeatedly, or press ꢀ or ꢁ to  
Connecting power  
select HDMI 1 or HDMI 2, then press ENTER/  
.
To connect the power:  
• Connect the AC power cord to the AC connector on  
the back of your TV/DVD combo, then plug the other  
end into a power outlet.  
Using DVI (same as HDMI but requires an audio  
connection)  
To connect a cable or satellite box using DVI:  
1 Turn off your TV/DVD combo and all connected  
equipment.  
2 Connect the incoming cable from the cable wall jack  
to the cable-in jack on the cable or satellite box.  
3 Connect an HDMI-DVI adapter (not provided) to one  
end of an HDMI cable (not provided), then connect it  
to the DVI OUT jack on the cable or satellite box.  
4 Connect the other end of the HDMI cable to the  
HDMI1 jack on the back of your TV/DVD combo.  
Note  
A DVI device can only be connected to the HDMI1  
jack on the back of your TV/DVD combo. If you  
connect a DVI device to the HDMI2 jack, you will not  
hear sound.  
Notes  
•
•
Your TV/DVD combo should only be operated  
from the power source indicated on the label.  
Always unplug the AC power cord from the  
power outlet when you will not be using your  
TV/DVD combo for an extended period of time.  
Cable or satellite box  
To Cable-in jack on the  
cable TV or satellite box  
Cable TV wall  
jack (75 ohm)  
Connecting a cable or satellite box  
Many cable or satellite TV boxes have more than one  
connection type. To get the best video, you should use  
the best connection type available. For more information,  
see “What connection should I use?” on page 7.  
Back of TV/DVD combo  
Using an HDMI cable (best)  
To connect a cable or satellite box using HDMI:  
P
B
1 Turn off your TV/DVD combo and all connected  
P
R
equipment.  
2 Connect the incoming cable from the cable wall jack  
to the cable-in jack on the cable or satellite box.  
3 Connect an HDMI cable (not provided) to one of the  
HDMI jacks on the back of your TV/DVD combo and  
to the HDMI OUT jack on the cable or satellite box.  
5 Connect a 3.5 mm audio cable (not provided) to the  
PC/DVI AUDIO IN jack on the back of your TV/DVD  
combo and to the AUDIO OUT jacks on the cable or  
satellite box.  
Cable or satellite box  
To Cable-in jack on the  
cable TV or satellite box  
Cable TV wall  
jack (75 ohm)  
6 Turn on your TV/DVD combo, then turn on the cable  
or satellite box.  
7 Go through the setup wizard described on page 16.  
8 To watch TV, press INPUT to open the INPUT SOURCE  
list, then press INPUT repeatedly, or press ꢀ or ꢁ to  
select HDMI 1, then press ENTER/  
.
Back of TV/DVD combo  
PB  
PR  
4 Turn on your TV/DVD combo, then turn on the cable  
or satellite box.  
5 Go through the setup wizard described on page 16.  
Notes  
An HDMI cable carries both audio and video. You do  
not need to use any audio cables.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
9
Making connections  
DX-19LD150A11  
Using component video cable (better)  
Using composite video cable (good)  
To connect a cable or satellite box using component  
video:  
To connect a cable or satellite box using composite  
video:  
1 Turn off your TV/DVD combo and all connected  
1 Turn off your TV/DVD combo and all connected  
equipment.  
equipment.  
2 Connect the incoming cable from the cable wall jack  
to the cable-in jack on the cable or satellite box.  
3 Connect a component video cable (provided) to the  
COMPONENT IN/Y, PB, PR jacks on the back of your  
TV/DVD combo and to the component video out  
jacks on the cable or satellite box.  
2 Connect the incoming cable from the cable wall jack  
to the cable-in jack on the cable or satellite box.  
3 Connect an A/V cable (not provided) to the VIDEO  
IN/VIDEO 1, and L, R jacks on the back of your  
TV/DVD combo and to the composite video and  
audio out jacks on the cable or satellite box.  
Cable or satellite box  
Cable or satellite box  
From cable TV  
wall jack (75 ohm)  
From cable TV  
wall jack (75 ohm)  
To Cable-in jack on the  
cable TV or satellite box  
To Cable-in jack on the  
cable TV or satellite box  
Cables are often  
color-coded to match  
color-coded jacks.  
Back of TV/DVD combo  
Back of TV/DVD combo  
PB  
PR  
PB  
PR  
4 Turn on your TV/DVD combo, then turn on the cable  
or satellite box.  
4 Connect an audio cable (provided) to the L, R audio  
jacks on the back of your TV/DVD combo and to the  
audio out jacks on the cable or satellite TV box.  
5 Turn on your TV/DVD combo, then turn on the cable  
or satellite box.  
5 Go through the setup wizard described on page 16.  
6 To watch TV, press INPUT to open the INPUT SOURCE  
list, then press INPUT repeatedly, or press ꢀ or ꢁ to  
select A/V, then press ENTER/  
.
6 Go through the setup wizard described on page 16.  
7 To watch TV, press INPUT to open the INPUT SOURCE  
list, then press INPUT repeatedly, or press ꢀ or ꢁ to  
select Component, then press ENTER/  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
DX-19LD150A11  
Making connections  
Using coaxial cable (good)  
Connecting an antenna or cable TV (no  
box)  
To connect a cable or satellite box using coaxial cable:  
1 Turn off your TV/DVD combo and all connected  
To connect an antenna or cable TV (no box):  
equipment.  
1 Turn off your TV/DVD combo and all connected  
2 Connect the incoming cable from the cable wall jack  
to the cable-in jack on the cable or satellite box.  
3 Connect a coaxial cable (not provided) to the  
ANT/CABLE IN jack on the back of your TV/DVD  
combo and to the coaxial out jack on the cable or  
satellite box.  
equipment.  
2 Connect a coaxial cable to the ANT/CABLE IN jack  
on the back of your TV/DVD combo and to the  
antenna or cable TV wall jack.  
Cable or satellite box  
From cable TV  
wall jack (75 ohm)  
To Cable-in jack on the  
cable TV or satellite box  
P
B
Back of TV/DVD combo  
P
R
Back of TV/DVD combo  
PB  
4 Turn on your TV/DVD combo, then turn on the cable  
or satellite box.  
5 Go through the setup wizard described on page 16.  
PR  
Notes  
•
•
Use a coaxial cable to eliminate interference  
and noise from radio waves.  
Do not bundle the coaxial cable with the power  
cord or other cables.  
3 Turn on your TV/DVD combo, then go through the  
setup wizard described on page 16.  
Notes  
•
•
•
Use a coaxial cable to eliminate interference  
and noise from radio waves.  
Do not bundle the coaxial cable with the power  
cord or other cables.  
If the antenna is not installed correctly, contact  
qualified service personnel to correct the  
problem.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
11  
Making connections  
DX-19LD150A11  
Connecting a DVD or Blu-ray player  
Connecting a VCR or DVD player  
To connect a DVD or Blu-ray player with HDMI or DVI  
To connect a VCR or DVD player with component cables:  
cables:  
1 Make sure that your TV/DVD combo’s power cord is  
unplugged and the VCR or DVD player is turned off.  
2 Connect a component video cable (provided) to the  
COMPONENT IN/Y, PB, PR jacks on the back of your  
TV/DVD combo and to the COMPONENT OUT jacks  
on the VCR or DVD player.  
1 Make sure that your TV/DVD combo’s power cord is  
unplugged and the DVD or Blu-ray player is turned  
off.  
2 Connect an HDMI cable (not provided) to the  
HDMI1 or HDMI2 jack on the back of your TV/DVD  
combo and to the HDMI OUT jack on the DVD or  
Blu-ray player.  
VCR or DVD player  
DVD or Blu-ray player  
Cables are often color-coded to  
match color-coded jacks.  
Back of TV/DVD combo  
Back of TV/DVD combo  
PB  
PB  
PR  
PR  
3 Connect an audio cable (provided) to the L, R audio  
jacks on the back of your TV/DVD combo and to the  
L/R AUDIO OUT jacks on the VCR or DVD player.  
4 Reconnect the power cord to your TV/DVD combo.  
3 If you are connecting a DVI device, connect an audio  
cable with stereo mini plug (not provided) to the  
PC/DVI AUDIO IN jack on the back of your TV/DVD  
combo and to the AUDIO OUT jack on the DVI  
device.  
Note  
The COMPONENT IN/Y, PB, PR (component video)  
jacks share the audio jacks with the VIDEO IN/AV  
jack (composite video).  
4 Reconnect the power cord to your TV/DVD combo.  
Note  
A DVI device can only be connected to the HDMI1  
jack. If you connect a DVI device to the HDMI2 jack,  
you will not hear sound.  
To play from the component video device:  
1 Turn on your TV/DVD combo, then press INPUT to  
open the INPUT SOURCE list.  
To play from a DVD or Blu-ray player:  
2 Press INPUT repeatedly, or press ꢀ or ꢁ to select  
1 Turn on your TV/DVD combo, then press INPUT to  
Component, then press ENTER/  
3 Turn on the VCR or DVD player.  
.
open the INPUT SOURCE list.  
2 Press INPUT repeatedly, or press ꢀ or ꢁ to select  
To connect a VCR or DVD player with an S-Video cable:  
HDMI 1 or HDMI 2, then press ENTER/  
3 Turn on the DVD or Blu-ray player.  
.
1 Make sure that your TV/DVD combo’s power cord is  
unplugged and the VCR or DVD player is turned off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
12  
DX-19LD150A11  
Making connections  
2 Connect an S-Video cable (not provided) to the  
S-VIDEO jack on the back of your TV/DVD combo  
and to the S-VIDEO OUT jack on the VCR or DVD  
player.  
Connecting a VCR  
To connect a VCR:  
1 Make sure that your TV/DVD combo’s power cord is  
unplugged and the VCR is turned off.  
VCR or DVD player  
2 Connect an A/V cable (not provided) to the VIDEO  
IN/VIDEO 1 and L, R audio jacks on the back of your  
TV/DVD combo and to the AV OUT jacks on the VCR.  
VCR  
Cables are often color-coded to  
match color-coded jacks.  
Connect yellow to yellow, red to  
red, and white to white.  
Back of TV/DVD combo  
Back of TV/DVD combo  
PB  
PR  
PB  
PR  
3 Connect an audio cable (provided) to the L and R  
audio jacks on the back of your TV/DVD combo and  
to the L/R AUDIO OUT jacks on the VCR or DVD  
player.  
3 Reconnect the power cord to your TV/DVD combo.  
To play from the VCR:  
Note  
1 Turn on your TV/DVD combo, then press INPUT to  
The VIDEO IN/S-VIDEO jack shares the audio jacks  
with the COMPONENT IN/Y, Pb, Pr (component  
video) jacks.  
open the INPUT SOURCE list.  
2 Press INPUT repeatedly, or press ꢀ or ꢁ to select  
A/V, then press ENTER/  
3 Turn on the VCR.  
.
4 Reconnect the power cord to your TV/DVD combo.  
To play from the S-Video device:  
Notes  
•
If you are not using the included audio cable for  
another device, you can use it and a standard  
one-plug video cable instead of the three-plug  
cable shown in this task.  
The VIDEO IN/AV (composite video) jack shares  
the audio jacks with the COMPONENT IN/Y, PB,  
PR (component video) jacks.  
1 Turn on your TV/DVD combo, then press INPUT to  
open the INPUT SOURCE list.  
2 Press INPUT repeatedly, or press ꢀ or ꢁ to select  
A/V, then press ENTER/  
.
•
3 Turn on the S-Video device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13  
Making connections  
DX-19LD150A11  
Using HDMI  
Connecting a computer  
To connect a computer using HDMI:  
Tip  
1 Make sure that your TV/DVD combo’s power cord is  
unplugged and the computer is turned off.  
2 Connect an HDMI cable (not provided) to an HDMI  
jack on the back of your TV/DVD combo and to the  
HDMI OUT jack on the computer.  
Some computers have an HDMI jack. You can use an  
HDMI cable to connect the computer for a better  
picture.  
Using VGA  
To connect a computer using VGA:  
1 Make sure that your TV/DVD combo’s power cord is  
unplugged and the computer is turned off.  
2 Connect a VGA cable (not provided) to the VGA jack  
on the back of your TV/DVD combo and to the VGA  
jack on the computer.  
Note  
The VGA cable should be a 15-pin D-Sub (analog RGB)  
cable.  
Back of TV/DVD combo  
PB  
PR  
3 Reconnect the power cord to your TV/DVD combo.  
To play video from the computer:  
1 Turn on your TV/DVD combo, then press INPUT to  
open the INPUT SOURCE list.  
2 Press INPUT repeatedly, or press ꢀ or ꢁ to select  
HDMI 1 or HDMI 2, then press ENTER/  
.
P
B
3 Turn on the computer and adjust the display  
P
R
properties if necessary.  
Back of TV/DVD combo  
3 Connect an audio cable with stereo mini plug (not  
provided) to the PC/DVI AUDIO IN jack on the back  
of your TV/DVD combo and to the LINE OUT or  
AUDIO OUT jack on the computer.  
4 Reconnect the power cord to your TV/DVD combo.  
To play video from the computer:  
1 Turn on your TV/DVD combo, then press INPUT to  
open the INPUT SOURCE list.  
2 Press INPUT repeatedly, or press ꢀ or ꢁ to select  
VGA, then press ENTER/  
.
3 Turn on the computer and adjust the display  
properties if necessary.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
14  
DX-19LD150A11  
Making connections  
Connecting a USB flash drive  
Connecting headphones  
To connect a USB flash drive:  
The TV/DVD combo speakers are muted when  
headphones are attached.  
• Make sure the TV/DVD combo is on, then plug a USB  
flash drive into the USB IN port on the back.  
Warning  
Loud noise can damage your hearing. When using  
headphones, use the lowest volume setting on your  
headphones that still lets you hear the sound.  
To connect headphones:  
• Connect headphones to the PHONE OUT jack on  
the back of your TV/DVD combo.  
Back of TV/DVD combo  
PB  
PR  
USB flash drive  
Back of TV/DVD combo  
Caution  
PB  
Do not remove the USB flash drive or turn off the  
TV/DVD combo while using the USB flash drive. You  
may lose data or damage the USB flash drive.  
PR  
Note  
If you switch to USB input before inserting the flash  
drive, "Please Insert USB Device" is displayed. If you  
then insert the flash drive, a thumbnail of the data is  
displayed.  
To play from a USB flash drive:  
1 Press INPUT to open the INPUT SOURCE list.  
2 Press INPUT repeatedly, or press ꢀ or ꢁ to select  
USB, then press ENTER/ . For more information,  
see "Viewing your photos" on page 18.  
Notes  
•
•
Never remove the USB flash drive or turn off  
your TV/DVD combo while viewing photos.  
The JPEG picture viewer only supports JPEG  
format images (with “.jpg” file extensions) and  
not all JPEG files are compatible with your  
TV/DVD combo.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
15  
Using the remote control  
DX-19LD150A11  
Connecting a basic home theater system  
Using the remote control  
Using digital audio  
Installing remote control batteries  
To connect a basic home theater system using digital  
audio:  
To install the remote control batteries:  
1 While pressing the cover release latch on the back of  
the remote control, lift the cover off the remote  
control.  
2 Insert two AAA batteries into the battery  
compartment. Make sure that you match the + and –  
symbols on the batteries with the + and – symbols in  
the battery compartment.  
1 Make sure that your TV/DVD combo’s power cord is  
unplugged and the home theater system is turned  
off.  
2 Connect a digital optical audio cable (not provided)  
to SPDIF OUT jack on the back of your TV/DVD  
combo and to the digital optical audio jack on the  
digital home theater system.  
Home theater system  
Back of TV/DVD combo  
3 Replace the battery cover.  
Cautions  
PB  
•
Batteries should not be exposed to excessive  
heat, such as sunshine, heat registers, or fire.  
Battery chemicals can cause a rash. If the  
batteries leak, clean the battery compartment  
with a cloth. If chemicals touch your skin, wash  
immediately.  
P
R
•
•
Make sure that batteries are disposed of  
correctly. Do not burn or incinerate.  
3 Reconnect the power cord to your TV/DVD combo.  
Using analog audio  
Notes  
To connect a basic home theater system using analog  
audio:  
•
•
•
•
Do not mix batteries of different types.  
Do not mix old and new batteries.  
Remove batteries when the charge is depleted.  
If the remote control is not going to be used for  
an extended period of time, remove the  
batteries.  
1 Make sure that your TV/DVD combo’s power cord is  
unplugged and the home system is turned off.  
2 Connect an audio cable (not provided) to the OUT/L,  
R (audio out) jacks on the back of your TV/DVD  
combo and to the AUDIO IN jacks on the home  
theater system.  
Aiming the remote control  
To aim the remote control:  
Home theater system  
1 Point the remote control towards the remote sensor  
on the front of your TV/DVD combo.  
Back of TV/DVD combo  
PB  
PR  
3 Reconnect the power cord to your TV/DVD combo.  
Note  
To play audio from the external audio system, make  
sure that the Speakers option on the Advanced  
Audio sub-menu is set to External. For more  
information, see “Adjusting the sound settings” on  
page 23.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
16  
DX-19LD150A11  
Turning on your TV/DVD combo for the first time  
• Time—Press ꢂ or ꢃ to highlight the hour,  
minute, or AM/PM, then press ꢀ or ꢁ to adjust  
each item.  
Turning on your TV/DVD combo  
for the first time  
5 Press ENTER/ . The Choose Your Picture Mode  
The first time you turn on your TV/DVD combo, the Setup  
Wizard opens. The Setup Wizard guides you through  
setting up basic settings including the menu language,  
date and time, picture mode, and TV signal source.  
screen opens.  
To set up your TV/DVD combo:  
1 Make sure that you have:  
• Installed the remote control batteries. (See  
page 15 for details).  
• Connected an antenna, cable TV, or satellite TV.  
(See page 8 to page 10 for details.)  
• Connected the power cord. (See page 8 for  
details.)  
2 Press (Power), then wait several seconds. The  
power LED on the front of your TV/DVD combo turns  
on and the Choose your menu language screen  
opens.  
6 Press ꢀ or ꢁ to highlight Home Mode or Retail  
Mode, then press ENTER/  
.
If you selected Retail Mode, a message appears  
“If you select Retail Mode, then Energy saving is  
not realized.” Select Yes to continue, or select No  
to change your selection.  
The Choose your TV source screen opens.  
3 Press ꢀ or ꢁ to highlight a language, then press  
ENTER/ . The Time screen opens with Mode  
highlighted.  
7 Press ꢀ or ꢁ to highlight Antenna, Cable, or Cable/  
Satellite Box (if your cable TV uses a box, select  
Cable/Satellite Box), then press ENTER/ . If you  
chose Antenna or Cable, your TV/DVD combo  
automatically starts scanning for channels available  
in your viewing area. If you chose Cable/Satellite  
box, your TV/DVD combo does not need to scan for  
channels.  
If you select Antenna, your TV/DVD combo  
searches for digital channels first. When the  
digital channel search is complete, a message  
appears asking if you want to search for analog  
channels. Select Yes to continue searching for  
analog channels, or select No to stop searching  
for channels.  
4 Press ꢀ or ꢁ to highlight an option, then press ꢂ or  
ꢃ to adjust the setting. You can adjust:  
• Mode—You can select Auto or Custom. If you  
select Auto, you can select Time Zone and  
Daylight Savings settings, but the date and  
time are set automatically from a digital TV  
signal. If you select Custom, you can manually  
set the date and time.  
Note  
You can press EXIT at any time to stop the auto scan,  
but you must run the auto scan again to create a  
channel list.  
• Time Zone—You can select Eastern, Central,  
Mountain, Pacific, Alaska, Hawaii, Atlantic, or  
Newfoundland.  
• Daylight Savings—You can select On (if your  
viewing area observes Daylight Savings Time) or  
Off (if your viewing area does not observe  
Daylight Savings Time).  
8 To watch TV, press INPUT and select the  
corresponding video input source from the INPUT  
SOURCE list.  
• Year—Press ꢂ or ꢃ to select the current year.  
• Month—Press ꢂ or ꢃ to select the current  
month.  
• Day—Press ꢂ or ꢃ to select the current day.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
17  
Understanding the basics  
DX-19LD150A11  
The TV/DVD combo automatically switches to DVD  
mode. The “Loading” message appears for a few  
seconds.  
Understanding the basics  
Turning your TV/DVD combo on or off  
To turn your TV/DVD combo on or off:  
1 Make sure that the power cord is connected to a  
power outlet.  
2 Press (Power) to turn on your TV/DVD combo.  
3 Press (Power) again to turn off your TV/DVD  
combo. Your TV/DVD combo enters Standby mode  
and the power indicator LED turns red.  
Selecting the video input source  
If you loaded an audio CD, the file browser screen  
appears and music playback automatically starts. If  
you loaded a video CD or DVD and that disc has a  
root menu, this root menu is displayed. Press ꢀ, ꢁ,  
ꢂ, or ꢃ to navigate the menu options. If there is no  
root menu, video playback automatically starts.  
To select the video input source:  
1 Turn on your TV/DVD combo, then press INPUT. The  
INPUT SOURCE list opens.  
Playback controls  
• Press VOL+/VOL– to adjust playback volume.  
• Press (Play/Pause) to temporarily suspend disc  
playback (still mode). Press it again to continue  
playback.  
• Playback navigation controls:  
• Press (Skip back) to play the previous title or  
track.  
• Press (Fast reverse) to play in fast reverse  
direction.  
• Press (Fast forward) to play in fast forward  
direction.  
• Press (Skip forward) to play the next title or  
track.  
2 Press INPUT repeatedly, or press ꢀ or ꢁ to select the  
video input source. Wait a few seconds for the  
TV/DVD combo to switch to your selection, or press  
ENTER/ to switch immediately.  
• Press A-B to create a playback loop.  
• During playback, press A-B at the point where  
you would like the playback loop to begin. This  
sets an “A” point.  
Using the DVD player  
Your TV/DVD combo’s built-in DVD player plays DVDs  
with the  
or  
playable region number marks. DVDs  
• Press A-B again when the playback reaches the  
point where you would like the playback loop to  
stop. The sets a “B” point. The section between  
points A and B will be played repeatedly in a loop  
until you press A-B again.  
with other region markings are not playable. See page 41  
for a list of compatible disc formats.  
Warning  
Keep your fingers clear of the disc slot when loading  
or unloading a disc. Neglecting to do so may cause  
serious personal injury.  
• Press (Stop) to stop playback.  
To remove the disc:  
1 Press (Eject) to unload the disc.  
2 Wait for the disc to be ejected, then remove the disc  
from the slot.  
To start disc playback:  
1 Press (Power) to turn on the TV/DVD combo.  
2 Insert a DVD into the disc slot with the label facing  
forward. The DVD player reads the DVD and displays  
the opening screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
18  
DX-19LD150A11  
Viewing photos  
Changing DVD settings  
Viewing your photos  
To change DVD settings:  
To view your photos:  
1 In DVD mode, press MENU. The on-screen menu  
1 Connect the USB flash drive containing the pictures  
you want to view to the USB IN jack on the back of  
your TV/DVD combo. For more information, see  
“Connecting a USB flash drive” on page 14.  
opens with the Picture menu displayed.  
2 Press ꢂ or ꢃ to highlight DVD. The DVD menu  
opens. Press ꢁ or ENTER/  
to access the menu.  
Note  
This TV/DVD combo does not support external hard  
drives.  
2 Press INPUT to open the INPUT SOURCE list. Press  
INPUT repeatedly, or press ꢀ or ꢁ to select USB,  
then press ENTER/  
.
3 The thumbnail screen opens. Press ꢀ, ꢁ, ꢂ, or ꢃ to  
browse the photo selection. The information bar  
shows the file name, file size, resolution, and  
modification date of the selected photo.  
3 Press ꢀ or ꢁ to highlight an option, then press ꢂ, ꢃ,  
or ENTER/ to select the setting you want. You can  
select:  
• Down Mix—Sets the Downmix mode. Settings  
include LT/RT or Stereo.  
• Repeat— Sets the repeat mode. Settings include  
Chapter, Title, or All for DVDs, and Track or All  
for CDs.  
Note  
You can also press REPEAT to select repeat mode.  
• Subtitle—Sets the subtitle language. Available  
settings depend on DVD content.  
Note  
Only those JPEG image files are displayed in the  
thumbnail.  
Note  
You can also press SUBTITLE to select subtitle  
4 When you select a photo, press ENTER/ to show  
the photo in full screen or press FAV to mark the  
photo as a favorite (with the favorite icon ). When  
you select a folder, press ENTER/ to enter the  
sub-folder.  
language.  
• Audio Select—Sets the audio track. Available  
settings depend on the DVD disc content.  
• Reset DVD—Resets DVD settings to factory  
default.  
Note  
4 Press EXIT to close the menu.  
Press ꢀ, ꢁ, ꢂ, or ꢃ to select  
icon, then press  
ENTER/ to go up one level in the photo directory.  
5 When a photo is displayed in full screen,  
• Press ZOOM to zoom in on the photo.  
Viewing photos  
• Press ENTER/ repeatedly to rotate the photo  
Your Dynex TV/DVD combo has a photo browser function  
that allows you to view photos saved to a USB flash drive.  
Pictures can be viewed in thumbnail mode for easy  
browsing or you can view them in a slide show.  
90° clockwise at a time.  
• Press MENU to return to the thumbnail list.  
If you switch to USB input before inserting the flash drive,  
"Please Insert USB Device" is displayed. If you then insert  
the flash drive, a thumbnail of the data is displayed.  
Viewing your favorite photos  
To view your favorite photos:  
1 In USB mode, press MENU. The on-screen menu  
Notes  
opens with the Picture menu displayed.  
•
•
•
Never remove the USB device or turn off your  
TV/DVD combo while viewing JPEG photos.  
We recommend that you back up the data on  
your USB device.  
The JPEG picture viewer only supports JPEG  
format images (with “.jpg” file extensions) and  
not all JPEG files are compatible with the  
TV/DVD combo. For example, progressive JPEG  
files are not compatible.  
2 Press ꢂ or ꢃ to highlight Photo. The Photo menu  
opens. Press ꢁ or ENTER/  
to access the menu.  
•
Unless otherwise noted, all tasks in this section  
are based on using the remote control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
19  
Using the on-screen menus  
DX-19LD150A11  
3 Press ꢀ or ꢁ to highlight Favorite Photo, then press  
Customizing the slide show settings  
ENTER/  
.
To customize the slide show settings:  
1 In USB mode, press MENU. The on-screen menu  
opens with the Picture menu displayed.  
2 Press ꢂ or ꢃ to highlight Photo. The Photo menu  
opens. Press ꢁ or ENTER/ to access the menu.  
3 Press ꢀ or ꢁ to highlight Settings, then press  
ENTER/  
.
4 A thumbnail screen of favorite photos opens. Press  
ꢀ, ꢁ, ꢂ, or ꢃ to browse the photo selection, then  
press ENTER/ to view the selected photo in full  
screen. Navigate the photo the same way as with  
other photos. See “Viewing your photos” on page 18  
for details.  
5 To exit from the favorite photo thumbnail, press  
MENU. Press ꢀ or ꢁ to highlight Browse Photo,  
4 Press ꢀ or ꢁ to highlight an option, then press ꢂ or  
ꢃ to select the setting you want.  
then press ENTER/  
.
You can select:  
Viewing photos in a slide show  
• Repeat—Displays photos in the same folder  
repeatedly. You can select On or Off.  
• Shuffle—Displays photos in a random  
sequence. You can select On or Off.  
To view photos in a slide show:  
1 When the photo thumbnail displays in USB mode,  
press MENU. The on-screen menu opens with the  
Picture menu displayed.  
• Speed—Selects the photo display interval time.  
You can select 2 Sec, 4 Sec, 6 Sec, or 8 Sec.  
• Transition—Selects the photo display transition  
effect. You can select None, Fade to Black,  
Vertical Wipe, Horizontal Wipe, or Random.  
5 Press EXIT to close the menu.  
2 Press ꢂ or ꢃ to highlight Photo. The Photo menu  
opens. Press ꢁ or ENTER/  
to access the menu.  
3 Press ꢀ or ꢁ to highlight Slide Show, then press  
ENTER/ . The slide show automatically begins.  
Using the on-screen menus  
On-screen menu overview  
Notes  
•
Depending on the signal source selected, you  
may see different options on your screen. The  
following menus are shown in TV mode.  
Menu items that are not selectable are grayed  
out.  
Menus in this manual are described in TV mode,  
unless otherwise indicated.  
The screens shown in this manual are for  
explanation purposes and may vary from the  
actual screens on your TV/DVD combo.  
•
•
•
4 To navigate a slide show,  
• Press ENTER/ to pause the slide show. Press it  
again to resume the slide show.  
• Press ꢂ or ꢃ to view previous or next photo in  
the sequence.  
• Press MENU to stop the slide show and return to  
the photo thumbnail.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
20  
DX-19LD150A11  
Using the on-screen menus  
Picture menu (TV mode)  
Navigating the menus  
Press MENU to open the on-screen menu.  
Press ꢂ or ꢃ to move the cursor on the  
screen or to adjust a selected item.  
Press ꢀ or ꢁ to select menu options.  
Audio menu (TV mode)  
Press ENTER/  
to confirm a selection or  
enter a sub-menu.  
Press MENU to return to the previous menu.  
Press EXIT to close the menu.  
Settings menu (TV mode)  
Selecting a channel  
To select a channel:  
Picture  
Audio  
Settings Channel  
• Press CHꢀ or CHꢁ to go to the next or previous  
channel on the memorized channel list.  
• Press the number buttons to enter the channel  
number you want, then wait for the channel to  
change or press ENTER/ to immediately change  
the channel.  
Parental Controls  
Time  
Closed Caption  
Menu Settings  
VGA Settings  
Input Labels  
• To select a digital sub-channel, press the number  
buttons to select the main digital channel, press —  
(dash), then press the number button for the  
sub-channel. Wait for the channel to change, or  
press ENTER/ to immediately change the  
channel.  
Open Source Notice  
Reset to Default  
Select  
Move  
Return  
Channels menu (TV mode)  
• Press RECALL to go to the last viewed channel. Press  
RECALL again to return to the channel you were  
watching.  
• Press FAV to open the favorite channel list, press ꢀ  
or ꢁ to highlight a channel, then press ENTER/  
.
Note  
If a list has more than one page, press ꢀ or ꢁ to scroll  
through the pages.  
Adjusting the volume  
To adjust the volume:  
• Press VOL+ or VOL– to increase or decrease the  
volume.  
• Press (Mute) to turn off the sound. Press (Mute)  
again to turn the sound back on.  
Viewing channel information  
To view channel information:  
• Press INFO to view an information banner. The  
information banner shows the current program  
information such as channel number, and  
resolution.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
21  
Adjusting the picture  
DX-19LD150A11  
• Digital channel information—Displays the  
• Color—Adjusts the color intensity of the picture.  
A low setting may make the color look faded. A  
high setting may make the color look artificial.  
• Tint—Adjusts the color balance of the picture.  
Use this control to make skin tones look more  
natural.  
channel number, station name, channel label (if  
present), broadcast program name, TV rating,  
audio information, resolution, CC mode, current  
time, and current program start and end times.  
• Sharpness—Adjusts the color detail of images. If  
you set this control too high, dark images may  
appear with light or white edges.  
• Advanced Video—Opens the Advanced Video  
sub-menu where you can adjust additional video  
options.  
• Analog channel information—Displays channel  
number, channel label (if preset), audio  
information, and resolution.  
• Press GUIDE to show the digital program guide,  
which may view a list of available programs,  
program times, and program summaries, depending  
on the information provided by the broadcaster.  
• Backlight—Sets the overall brilliance of the  
screen.  
• Aspect Ratio—Selects the aspect ratio of the  
picture.  
Adjusting the picture  
Aspect ratio option  
Example  
Auto:  
Adjusting the TV picture  
The picture display is adjusted  
to the correct aspect ratio  
automatically (TV mode only).  
This setting is only active  
when Auto Zoom in the  
To adjust the TV picture:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
Channel menu is set to On.  
Normal:  
Displays the original 4:3  
aspect ratio with vertical black  
bars on the left and right of  
the image.  
Wide:  
Use this option to view  
content recorded in a 16:9  
(wide-screen) aspect ratio.  
2 Press ꢁ or ENTER/ to access the menu.  
3 Press ꢀ or ꢁ to highlight an option, then press ꢂ or  
ꢃ to adjust the setting. You can select:  
• Mode—Selects the picture mode. You can select:  
• Vivid—Provides a bright and vivid picture.  
• Standard—Provides a standard picture.  
• Energy Savings—Reduces the brightness  
and backlight levels to save energy.  
Zoom:  
Expands the image to fill the  
screen. The top and bottom of  
the image may be cropped.  
• Theater—Provides finely detailed  
cinema-like viewing.  
Cinema:  
• Sports—Provides a dynamic picture.  
• Custom—Lets you manually customize the  
picture settings.  
Stretches the image at the  
edges, but keeps a clear image  
in the center.  
Note  
You can also press PICT to select the picture mode.  
• Brightness—Adjusts the brightness of the dark  
areas of the picture.  
Note  
• Contrast—Adjusts the brightness of the light  
You can also press ZOOM to select the aspect ratio.  
areas of the picture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
22  
DX-19LD150A11  
Adjusting the picture  
• Overscan—This feature extends part of the  
5 Press EXIT to close the menu.  
display past the visible area of the screen. The  
resulting picture will “zoom in” on the image  
center.  
Note  
If you select Off, the power on picture mode  
depends on your last selection.  
• Color Temperature—Selects the color  
temperature. You can select Cool (to  
enhance the blues), Normal, or Warm (to  
enhance the reds).  
• Noise Reduction—Selects the noise  
reduction mode to reduce picture noise  
(snow). You can select Low, Middle, High, or  
Off.  
Adjusting the computer image  
To adjust the computer image:  
1 Make sure that your TV/DVD combo is in VGA mode.  
For more information, see “Selecting the video input  
source” on page 17.  
2 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
• Adaptive Contrast—Automatically adjusts  
picture detail and brightness. You can select  
On or Off.  
• DCR—Enhances the contrast ratio between  
light and dark areas of the picture. You can  
select On or Off.  
• Reset Picture Settings—Resets all picture  
settings to factory default.  
4 Press EXIT to close the menu.  
Setting power on vivid mode  
If you select Retail Mode from the Setup Wizard to use  
your TV/DVD combo for in-store display, you can set vivid  
mode as your power on default, regardless of the picture  
mode you select when turning off the TV/DVD combo.  
3 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
Note  
4 Press ꢀ or ꢁ to highlight VGA Settings, then press  
If you select Home Mode from the Setup Wizard, you  
cannot set power on vivid mode.  
ENTER/  
.
To set power on vivid mode:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
Open Source Notice  
Reset to Default  
5 The VGA Settings sub-menu opens. Press ꢀ or ꢁ to  
highlight an option, then press ꢂ or ꢃ to adjust the  
option.  
2 Press ꢀ or ꢁ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/ to access the  
menu.  
3 Press ꢀ or ꢁ to highlight Menu Settings, then press  
ENTER/  
.
4 Press ꢀ or ꢁ to highlight Power On In Vivid Mode,  
then press ꢂ or ꢃ to select On.  
Picture  
Audio  
Settings Channel  
Language  
Transparency  
Power On In Vivid Mode  
English  
On  
0
You can select:  
• Auto Adjust—Automatically adjusts the image  
settings such as position and phase.  
• H. Position—Moves the image right or left.  
• V. Position—Moves the image up or down.  
• Clock—Adjusts the sample frequency.  
• Phase—Adjusts the focus of stable images.  
6 Press EXIT to close the menu.  
Select  
Move  
Return  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
23  
Adjusting the sound  
DX-19LD150A11  
• Balance—Adjusts the balance between the left  
and right audio channels.  
Adjusting the sound  
• Auto Volume—Adjusts the volume to keep the  
volume level consistent when switching  
channels or when switching from a TV show to a  
commercial. You can select On or Off.  
• Advanced Audio—Opens the Advanced Audio  
sub-menu.  
Selecting the sound mode or audio  
language  
To select an audio language in digital TV mode:  
• Press SAP repeatedly to select an audio language (if  
available).  
To select the sound mode in analog TV mode:  
• Press SAP repeatedly to cycle through the audio  
sound mode. The options available depend on your  
TV provider. You can select:  
• Mono—Select this option if there is noise or  
static from a weak broadcast signal.  
• Stereo—Select this option for programs  
broadcast in stereo sound.  
• SAP—Select this option to enable audio in an  
alternative language.  
You can select:  
MTS Audio: Stereo  
• Digital Audio/SPDIF—Selects the preferred  
audio format for digital audio signals.  
Options include PCM and RAW.  
• Audio Language—Selects the default  
language track when watching digital TV  
programs. Options include English, Français  
(French), and Español (Spanish).  
• MTS/SAP—Selects the default language  
stream when watching analog or digital TV  
channels. See "Selecting the sound mode or  
audio language" on page 23.  
Adjusting the sound settings  
To adjust the sound settings:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
• Speakers—Selects the TV audio output  
source. If an external audio amplifier is  
connected to your TV/DVD combo, select  
External to output the TV sound from the  
amplifier.  
• Reset Audio Settings— Resets all audio settings  
to factory defaults.  
4 Press EXIT to close the menu.  
Playing TV audio only  
2 Press ꢂ or ꢃ to highlight Audio. The Audio menu  
opens. Press ꢁ or ENTER/  
to access the menu.  
You can turn off the picture on your TV/DVD combo and  
listen to the program audio only.  
To play TV audio only:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
3 Press ꢀ or ꢁ to highlight an option, then press ꢂ or  
ꢃ to adjust the setting. You can select:  
• Mode—Selects the EQ sound mode. You can  
select Standard, Theater, Music, News, or  
Custom.  
2 Press ꢂ or ꢃ to highlight Channel. The Channel  
menu opens. Press ꢁ or ENTER/  
to access the  
Note  
menu.  
You can also press AUDIO to select the audio mode.  
• Treble—Adjusts the high sounds.  
• Bass—Adjusts the low sounds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
24  
DX-19LD150A11  
Changing channel settings  
3 Press ꢀ or ꢁ to highlight Audio Only, then press ꢂ  
or ꢃ to select On.  
3 Press ꢀ or ꢁ to highlight Air/Cable, then press ꢂ or  
ꢃ to select your signal type.  
4 Press EXIT to close the menu. The picture turns off in  
You can select:  
approximately 3 to 5 seconds.  
• Air—Select this option if you use an antenna.  
Your TV/DVD combo scans for analog (VHF and  
UHF) and digital channels in your area.  
• Cable—Select this option if you have cable TV  
and do not have a cable TV box. Your TV/DVD  
combo scans for analog and digital channels in  
your area.  
Notes  
•
•
Audio only works only when the input source is  
TV and your TV/DVD combo is receiving a  
broadcast signal.  
To exit audio only mode, press any button.  
When you exit audio only mode, the Audio  
Only option is automatically reset to Off.  
• Cable/Satellite Box—Select this option if you  
use a cable or satellite TV box. Your TV/DVD  
combo will not scan for channels because the  
cable or satellite TV box provides the channel list.  
4 Press ꢀ or ꢁ to highlight Auto Channel Search,  
Changing channel settings  
then press ENTER/  
.
5 A confirmation box opens. Press ꢂ or ꢃ to highlight  
Automatically scanning for channels  
Yes, then press ENTER/ to start the auto scan.  
When you scan for channels, your TV/DVD combo  
searches for channels available in your viewing area and  
stores the channel information in the channel list. When  
you press CHꢀ and CHꢁ, your TV/DVD combo tunes to  
the next or previous channel in the channel list and skips  
any channels that were not stored in the list.  
You do not need to scan for channels if you are connected  
using a cable or satellite box, which automatically  
provides you with a channel list.  
Note  
You do not need to scan for channels unless the  
available channels changed after you ran the Setup  
Wizard. For more information, see “Turning on your  
TV/DVD combo for the first time” on page 16.  
6 A progress box shows the progress of the scan.  
To automatically scan for channels:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
Auto Scan may take a while to complete. A progress  
report is displayed while your TV/DVD combo is  
scanning for available channels. If you select Air,  
after the digital channel scan is complete, you can  
continue to search for analog channels without  
pressing any buttons, or you can press EXIT to exit if  
you do not need the analog channel scan.  
You can press MENU or EXIT at any time to stop  
scanning, but you must run the scan later to  
complete the process.  
2 Press ꢂ or ꢃ to highlight Channel. The Channel  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
25  
Changing channel settings  
DX-19LD150A11  
Hiding channels  
Setting up a favorite channel list  
You can hide channels in the channel list. When you press  
CHꢀ or CHꢁ, your TV/DVD combo skips the hidden  
channels. You can still tune to a hidden channel by  
pressing the number buttons for the channel.  
You can create a favorite channel list to make it easier to  
tune to your favorite channels.  
To set up a favorite channel list:  
1 Press MENU. The on-screen menu opens with the  
To hide channels:  
Picture menu displayed.  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
2 Press ꢂ or ꢃ to highlight Channel. The Channel  
menu opens. Press ꢁ or ENTER/  
to access the  
2 Press ꢂ or ꢃ to highlight Channel. The Channel  
menu.  
menu opens. Press ꢁ or ENTER/  
to access the  
3 Press ꢀ or ꢁ to highlight Favorites, then press  
ENTER/ . The favorite channel list opens.  
menu.  
3 Press ꢀ or ꢁ to highlight Add/Skip Channels, then  
press ENTER/ . The channel list opens.  
4 Press ꢀ or ꢁ to highlight the channel you want to  
add to the favorites list, then press ENTER/ . A  
check mark appears next to the channel.  
4 Press ꢀ or ꢁ to highlight the channel you want to  
hide, then press ENTER/ . The check mark  
disappears.  
Notes  
•
•
To remove a channel from the favorites list,  
highlight the channel, then press ENTER/  
.
Notes  
The check mark disappears and the channel is  
removed from the list.  
If the list has more than one page, press ꢀ or ꢁ  
•
•
A channel with a check mark is not hidden. A  
channel with no check mark is hidden.  
If the list has more than one page, press ꢀ or ꢁ  
to scroll through the pages.  
to scroll through the pages.  
5 Press EXIT to close the menu.  
5 Press EXIT to close the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
26  
DX-19LD150A11  
Changing channel settings  
4 Press ꢀ or ꢁ to select the channel you want to label,  
Viewing a favorite channel  
then press ꢃ or ENTER/  
.
To view a favorite channel:  
1 Press FAV. The Favorites channel list opens.  
5 Press ENTER/ again to open the on-screen  
keyboard. Press ꢀ, ꢁ, ꢂ, or ꢃ to highlight a  
character, then press ENTER/ to add the  
character to the label. Repeat this step to add more  
characters.  
2 Press ꢀ or ꢁ to highlight a channel, then press  
ENTER/ to tune to the channel.  
Adding or changing a channel label  
If a channel is not already labeled, you can label the  
channel to make it easier to identify. You can also relabel  
a channel that is already labeled.  
To add or change a channel label:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
• Highlight Caps Lock, then press ENTER/ to  
toggle the letter case from small to capital  
letters.  
• Highlight  
character.  
, then press ENTER/ to delete a  
• Highlight Space, then press ENTER/ to insert  
a space.  
6 When the label you want has been entered,  
highlight Enter, then press ENTER/ to assign the  
label to the channel.  
2 Press ꢂ or ꢃ to highlight Channel. The Channel  
menu opens. Press ꢁ or ENTER/  
to access the  
7 Press EXIT to close the menu.  
menu.  
3 Press ꢀ or ꢁ to highlight Channel Labels, then  
Checking the digital signal strength  
press ENTER/  
.
You can check the digital signal strength to determine if  
you need to adjust your antenna or digital cable input.  
The higher the signal strength, the less likely you are to  
experience picture degradation.  
To check the digital signal strength:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
27  
Setting parental controls  
DX-19LD150A11  
2 Press ꢂ or ꢃ to highlight Channel. The Channel  
4 The Enter Password screen opens. If you are adding a  
password, use the number buttons to enter 0000. If  
you are changing a password, enter the old  
password. If you have forgotten your password,  
enter 9999.  
menu opens. The digital TV signal strength is  
indicated by the color bar beside the Channel  
Strength option.  
3 Press EXIT to close the menu.  
5 The Parental Controls sub-menu opens. Press ꢀ or ꢁ  
to highlight Change Password, then press  
ENTER/  
.
Setting parental controls  
Parental controls let you prevent your children from  
watching inappropriate material on TV. When set,  
parental controls read the rating of the program (with  
some exceptions, such as news and sports) and deny  
access to programs that exceed the ratings level you  
select. To watch programs that exceed the selected  
rating, you must enter the password.  
Setting or changing the password  
To set or change the password:  
1 Press MENU. The on-screen menu opens with the  
6 If you are adding a password, enter 0000 as the old  
password. If you are changing a password, enter  
your old password.  
7 Enter your new password, then enter it again to  
confirm. The Parental Controls sub-menu re-opens.  
8 Press EXIT to close the menu.  
Picture menu displayed.  
Setting parental control levels  
You can set parental control levels for the U.S. and  
Canada. The following procedure shows how to set  
controls for U.S. TV and movie ratings. You use similar  
steps for controlling Canadian TV ratings.  
Parental control settings are only applicable to programs  
that have a rating signal. If you prefer to block programs  
that have no rating signal, see “Blocking unrated TV” on  
page 29.  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
3 Press ꢀ or ꢁ to highlight Parental Controls, then  
Ratings  
press ENTER/  
.
U.S. TV ratings (age-based)  
NONE  
TV-Y  
Not rated  
All children  
TV-Y7  
Children over seven years  
of age  
TV-G  
General audiences  
TV-PG  
Parental guidance  
suggested  
Open Source Notice  
Reset to Default  
TV-14  
Parents strongly cautioned  
Mature audiences only  
TV-MA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
28  
DX-19LD150A11  
Setting parental controls  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
U.S. TV ratings (content-based)  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
All  
FV  
L
All ratings are blocked  
3 Press ꢀ or ꢁ to highlight Parental Controls, then  
Fantasy violence  
Adult language  
Sexual situations  
Violence  
press ENTER/  
.
S
V
D
Sexually suggestive dialog  
U.S. movie (MPAA) ratings  
None  
G
Movie not rated  
Open Source Notice  
Reset to Default  
General audiences  
PG  
Parental guidance  
suggested  
4 The Enter Password screen opens. Use the number  
buttons to enter your password.  
5 The Parental Controls sub-menu opens. Press ꢀ or ꢁ  
to highlight USA Parental Locks, then press  
ENTER/ . (To set Canadian ratings, select  
Canadian Parental Locks.)  
PG-13  
R
Suitable for children 13 and  
older  
Parental guidance  
suggested for children  
under 17  
NC-17  
X
Not suitable for children  
under 17  
Note  
If you select Canadian Parental Locks, the language  
preference screen opens. Press or to highlight  
Adults only  
your preferred language, then press ENTER/  
.
Canadian English ratings  
E
Exempt programming  
C
Children  
C8+  
G
Children over 8 years old  
General audiences  
Parental guidance  
Over 14 years old  
Adult programming  
PG  
14+  
18+  
6 Press ꢀ or ꢁ to highlight TV (for TV programs), or  
MPAA (for movies), then press ENTER/  
Canadian French ratings  
.
E
Exempt programming  
G
General audiences  
Over 8 years old  
8 ans+  
13 ans+  
16 ans+  
18 ans+  
Over 13 years old  
Over 16 years old  
Adult programming  
To set parental control levels:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
7 The ratings screen opens. For TV rating, press ꢀ ꢁ ꢂ  
or ꢃ to highlight the rating you want to block, then  
press ENTER/ . That rating and all other higher  
ratings are blocked.  
OR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
Setting parental controls  
DX-19LD150A11  
For the MPAA rating, press ꢀ or ꢁ to highlight the  
4 The Enter Password screen opens. Use the number  
buttons to enter your password.  
5 The Parental Controls sub-menu opens. Press ꢀ or ꢁ  
to highlight Block Unrated TV, then press ꢂ or ꢃ to  
select On.  
rating you want to block, then press ENTER/ . That  
rating and all other higher ratings are blocked. Lock  
icons appear next to all locked ratings.  
6 Press EXIT to close the menu.  
Viewing blocked content  
You can temporarily cancel the parental control  
restriction you have placed on your TV/DVD combo.  
To view blocked content:  
1 Tune to the blocked program you want to watch.  
2 On the warning message indicating the blocked  
content, use the number buttons to enter your  
password.  
8 Press EXIT to close the menu.  
Blocking unrated TV  
Not all TV programs have a rating signal. You can block all  
unrated programs from displaying on your TV/DVD  
combo.  
To block unrated TV:  
3 To turn parental controls back on, do one of the  
following:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
• Change channels  
• Change the video input source  
• Turn off your TV/DVD combo, then turn it back  
on.  
Locking control buttons  
You can lock the TV control buttons on the left side of  
your TV/DVD combo. When the control buttons on your  
TV/DVD combo are locked, you can only operate the  
TV/DVD combo with the remote control.  
To lock control buttons:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
3 Press ꢀ or ꢁ to highlight Parental Controls, then  
press ENTER/  
.
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
Open Source Notice  
Reset to Default  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
30  
DX-19LD150A11  
Setting parental controls  
3 Press ꢀ or ꢁ to highlight Parental Controls, then  
4 The Enter Password screen opens. Use the number  
buttons to enter your password.  
press ENTER/  
.
5 The Parental Controls sub-menu opens. Press ꢀ or ꢁ  
to highlight RRT5, then press ENTER/  
.
Open Source Notice  
Reset to Default  
4 The Enter Password screen opens. Use the number  
buttons to enter your password.  
5 The Parental Controls sub-menu opens. Press ꢀ or ꢁ  
to highlight Button Lock, then press ꢂ or ꢃ to select  
On.  
6 The RRT setting screen opens. Press ꢀ or ꢁ to  
highlight a rating type, then press ENTER/  
.
7 The rating screen for that rating type opens. Press ꢀ  
6 Press EXIT to close the menu.  
or ꢁ to highlight a rating, then press ENTER/  
to  
enable or disable it. A lock icon indicates the rating is  
disabled.  
Downloading rating information  
To download rating information:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
8 Press EXIT to close the menu.  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
3 Press ꢀ or ꢁ to highlight Parental Controls, then  
press ENTER/  
.
Open Source Notice  
Reset to Default  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
31  
Using closed captioning  
DX-19LD150A11  
6 Press ꢀ or ꢁ to highlight a DVD rating you want to  
lock, then press ENTER/ . That rating and all other  
higher ratings are locked. Lock icons appear next to  
all locked ratings.  
Setting DVD locks  
A DVD is usually encoded with a rating level to indicate  
the recommended audience age. You can select the  
content rating level allowed for playback on your TV/DVD  
combo.  
To set DVD locks:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
7 Press EXIT to close the menu.  
Using closed captioning  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
Closed captions (CC or subtitles) are intended to provide  
people who are hearing impaired with access to TV  
programs. However, this feature is also useful for viewers  
who are learning a new language, beginning to read, or in  
a noisy environment. Text captions are displayed to  
transcribe speech and often other relevant sounds.  
Closed captioning availability and content depends on  
the broadcaster and may vary across programs in a  
channel.  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
3 Press ꢀ or ꢁ to highlight Parental Controls, then  
press ENTER/  
.
Turning closed captioning on or off  
To turn closed captioning on or off with the remote  
control:  
Open Source Notice  
Reset to Default  
• Press CCD repeatedly to select the closed captioning  
mode you want. You can select:  
• CC Off—Turns off closed captioning.  
• CC On—Turns on closed captioning.  
• CC On Mute—Turns on closed captioning  
when the sound is muted.  
4 The Enter Password screen opens. Use the number  
buttons to enter your password.  
5 The Parental Controls sub-menu opens. Press ꢀ or ꢁ  
to highlight DVD Locks, then press ENTER/  
.
To turn closed captioning on or off with the on-screen  
menu:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
menu.  
to access the  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
32  
DX-19LD150A11  
Using closed captioning  
3 Press ꢀ or ꢁ to highlight Closed Caption, then  
4 Press ꢀ or ꢁ to highlight Analog Caption or Digital  
Caption, then press ꢂ or ꢃ to select the closed  
caption mode you want.  
press ENTER/  
.
Open Source Notice  
Reset to Default  
4 Press ꢀ or ꢁ to highlight Caption Control, then  
press ꢂ or ꢃ to select the closed caption mode.  
5 Press EXIT to close the menu.  
Customizing digital closed captioning  
styles  
To customize digital closed captioning styles:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
5 Press EXIT to close the menu.  
Selecting the closed captioning mode  
To select the closed captioning mode:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
3 Press ꢀ or ꢁ to highlight Closed Caption, then  
press ENTER/  
.
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
to access the  
Open Source Notice  
Reset to Default  
menu.  
3 Press ꢀ or ꢁ to highlight Closed Caption, then  
press ENTER/  
.
4 Press ꢀ or ꢁ to highlight Digital CC Settings, then  
press ENTER/  
.
Open Source Notice  
Reset to Default  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
33  
Adjusting time settings  
DX-19LD150A11  
5 Press ꢀ or ꢁ to highlight Style, then press ꢂ or ꢃ to  
3 Press ꢀ or ꢁ to highlight Time, then press  
select Custom.  
ENTER/  
.
Open Source Notice  
Reset to Default  
6 Press ꢀ or ꢁ to highlight a style, then press ꢂ or ꢃ to  
adjust the style. You can select:  
• Size—Selects the font size.  
4 Press ꢀ or ꢁ to highlight Date/Time, then press  
ENTER/  
.
• Font—Selects the font style.  
• Text Color—Selects the color for the text.  
• Text Opacity—Selects the opacity level for the  
text.  
• Background Color—Selects the color for the  
background.  
• Background Opacity—Selects the opacity level  
for the background.  
• Edge Settings—Selects Edge Effect and Edge  
Color.  
Notes  
5 Press ꢀ or ꢁ to highlight Mode, then press ꢂ or ꢃ to  
select Custom.  
•
•
If you set the Style option to Automatic, you  
cannot change any of the styles.  
Do not use the same setting for Text Color and  
Background Color, because the text caption  
will be invisible.  
Notes  
If you set Mode to Auto:  
•
The time is set automatically based on a digital  
TV signal.  
7 Press EXIT to close the menu.  
•
You can only change the Time Zone and  
Daylight Savings options. You cannot change  
any of the other options.  
Adjusting time settings  
Manually setting the date and time  
To manually set the date and time:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
6 Press ꢀ or ꢁ to highlight Year, Month, or Day, then  
press ꢂ or ꢃ to change the setting.  
7 Press ꢀ or ꢁ to highlight Time, then press ꢂ or ꢃ to  
select the hour, minute, or AM/PM. Press ꢀ or ꢁ to  
change the setting.  
8 Press EXIT to close the menu.  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
menu.  
to access the  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
34  
DX-19LD150A11  
Adjusting menu settings  
Setting the sleep timer  
Adjusting menu settings  
You can set the amount of time before your TV/DVD  
combo automatically turns off.  
To set the sleep timer with the remote control:  
Selecting the menu language and  
transparency  
• Press SLEEP until the setting you want is displayed.  
To select the on-screen menu language and  
transparency:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
To set the sleep timer with on-screen menu:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
3 Press ꢀ or ꢁ to highlight Menu Settings, then press  
ENTER/  
.
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
3 Press ꢀ or ꢁ to highlight Time, then press  
ENTER/  
.
Open Source Notice  
Reset to Default  
Open Source Notice  
Reset to Default  
4 Press ꢀ or ꢁ to highlight Language, then press ꢂ or  
ꢃ to select the menu language your want. You can  
select English, Français (French), or Español  
(Spanish).  
4 Press ꢀ or ꢁ to highlight Sleep Timer, then press ꢂ  
or ꢃ to select the setting your want. To turn off the  
timer, select Off.  
Picture  
Audio  
Settings Channel  
Language  
English  
Off  
Transparency  
0
Power On In Vivid Mode  
5 Press ꢀ or ꢁ to highlight Transparency, then press  
ꢂ or ꢃ to adjust the menu transparency.  
Pressing ꢃ makes the menu more transparent.  
Pressing ꢂ makes the menu more opaque.  
6 Press EXIT to close the menu.  
5 Press EXIT to close the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
35  
Restoring default settings  
DX-19LD150A11  
5 Press ENTER/ again to open the on-screen  
keyboard. Press ꢀ, ꢁ, ꢂ, or ꢃ to highlight a  
character, then press ENTER/ to add the  
Labeling an input source  
You can add a label to a video input source to make it  
easier to identify. These labels are displayed on the INPUT  
SOURCE list and on the banner that appears when you  
press INFO.  
character to the label. Repeat this step to add more  
characters.  
To label an input source:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
• Highlight Caps Lock, then press ENTER/ to  
toggle the letter case from small to capital  
letters.  
• Highlight  
, then press ENTER/ to delete a  
character.  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
• Highlight Space, then press ENTER/ to insert  
a space.  
6 When the label you want has been entered,  
highlight Enter, then press ENTER/ to assign the  
label to the input source.  
7 Press EXIT to close the menu.  
menu opens. Press ꢁ or ENTER/  
to access the  
menu.  
3 Press ꢀ or ꢁ to highlight Input Labels, then press  
ENTER/  
.
Restoring default settings  
Caution  
When you restore default settings, all the settings  
(except the password and parental rating) you have  
customized are reset.  
Open Source Notice  
Reset to Default  
Restoring default settings  
4 Press ꢀ or ꢁ to select the input source you want to  
label, then press ꢃ or ENTER/  
.
To restore default settings:  
1 Press MENU. The on-screen menu opens with the  
Picture menu displayed.  
2 Press ꢂ or ꢃ to highlight Settings. The Settings  
menu opens. Press ꢁ or ENTER/  
menu.  
to access the  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
36  
DX-19LD150A11  
Maintaining  
3 Press ꢀ or ꢁ to highlight Reset to Default, then  
Maintaining  
press ENTER/  
.
Cleaning  
Picture  
Audio  
Settings Channel  
Before cleaning the screen, unplug your TV/DVD combo  
Parental Controls  
Time  
Closed Caption  
Menu Settings  
VGA Settings  
Input Labels  
from the power outlet.  
Clean your TV/DVD combo with a soft, dry cloth. If  
surfaces are extremely dirty, use a soft cloth dampened  
with a weak detergent solution.  
Use an eyeglass cleaner to clean the screen. Never use  
alcohol, paint thinner, or benzine.  
Open Source Notice  
Reset to Default  
Before using a chemically treated cloth, read the  
instructions that came with the cloth.  
Select  
Move  
Return  
Do not spray insecticide liquid near your TV/DVD combo.  
Such chemicals may cause damage and discoloration to  
the exposed surfaces.  
4 The confirmation screen opens. Press ꢂ or ꢃ to  
highlight Yes, then press ENTER/  
5 Press EXIT to close the menu.  
.
Servicing  
Do not try to repair your TV/DVD combo yourself. There  
are no user-serviceable parts inside. Turn off your TV/DVD  
combo, unplug the power cord, then contact an  
authorized service center.  
Care and handling of discs  
Handling discs  
Do not touch the playback side of the disc. Hold the disc  
by the edges so that fingerprints do not get on the  
surface. Never stick paper or tape on the disc.  
Storing discs  
After playing, store the disc in its case. Do not expose the  
disc to direct sunlight or sources of heat and never leave it  
in a parked car exposed to direct sunlight.  
Cleaning discs  
Fingerprints and dust on the disc can cause poor picture  
quality and sound distortion. Before playing, clean the  
disc with a clean cloth. Wipe the disc from the center out.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
37  
Troubleshooting  
DX-19LD150A11  
Problem  
Solution  
Troubleshooting  
No color, dark  
picture, or color is  
not correct.  
• Try another channel. The station may  
be experiencing problems.  
Warning  
• Adjust the color saturation. See  
“Adjusting the TV picture” on page 21.  
• Make sure that the video cables are  
connected correctly and securely to  
the back of your TV/DVD combo.  
• Make sure that the antenna or cable TV  
is connected correctly and securely.  
See “Connecting a cable or satellite  
box” on page 8 or “Connecting an  
antenna or cable TV (no box)” on  
page 10.  
Do not try to repair your TV/DVD combo yourself.  
Contact authorized service personnel.  
Video and audio  
Problem  
Solution  
Picture does not fill  
the screen. There are  
black bars around  
the picture.  
• Change the aspect ratio. An increasing  
amount of digital TV and movies are  
presented in wide screen (16:9). See  
“Adjusting the TV picture” on page 21.  
• If you are using an antenna, the digital  
channel signal may be low. To check  
the digital channel signal strength, see  
“Checking the digital signal strength”  
on page 26.  
• If you are using an antenna and the  
signal strength is low, adjust the  
antenna or use a highly directional  
outdoor antenna or set-top antenna  
with a built-in amplifier.  
No picture (screen is  
not lit) and no  
sound.  
• Press on the TV/DVD combo or the  
remote control.  
• Make sure that the video cables are  
connected securely to the back of your  
TV/DVD combo.  
• Adjust the contrast and brightness.  
See “Adjusting the TV picture” on  
page 21.  
• Make sure that the power cord is  
plugged in.  
Only snow (noise)  
appears on the  
screen.  
• Try another channel. The station may  
be experiencing problems.  
• Make sure that the correct video input  
source is selected. See “Selecting the  
video input source” on page 17.  
• Try another channel. The station may  
be experiencing problems.  
• Make sure that the incoming signal is  
compatible.  
• Make sure the antenna or cable TV is  
connected correctly and securely. See  
“Connecting a cable or satellite box”  
on page 8 or “Connecting an antenna  
or cable TV (no box)” on page 10.  
• Check the closed caption settings.  
Some TEXT modes can block the  
screen.  
• Make sure that the antenna or cable TV  
is connected correctly and securely.  
See “Connecting a cable or satellite  
box” on page 8 or “Connecting an  
antenna or cable TV (no box)” on  
page 10.  
• If you are using an antenna, the digital  
channel signal may be low. To check  
the digital channel signal strength, see  
“Checking the digital signal strength”  
on page 26.  
• If you are using an antenna and the  
signal strength is low, adjust the  
antenna or use a highly directional  
outdoor antenna or set-top antenna  
with a built-in amplifier.  
Dark, poor, or no  
picture (screen is lit),  
but sound is good.  
• Try another channel. The station may  
be experiencing problems.  
Dotted lines or  
stripes appear on  
the screen.  
• Make sure that the antenna or cable TV  
is connected correctly and securely.  
See “Connecting a cable or satellite  
box” on page 8 or “Connecting an  
antenna or cable TV (no box)” on  
page 10.  
• If you are using an antenna, the digital  
channel signal may be low. To check  
the digital channel signal strength, see  
“Checking the digital signal strength”  
on page 26.  
• If you are using an antenna and the  
signal strength is low, adjust the  
antenna or use a highly directional  
outdoor antenna or set-top antenna  
with a built-in amplifier.  
• Make sure that the video cables are  
connected securely to the back of your  
TV/DVD combo.  
• The video cable(s) you are using may  
be bad. Try a new set.  
• Other devices (for example, surround  
sound receiver, external speakers, fans,  
or hair dryers) may be interfering with  
your TV/DVD combo. Try turning off  
one device at a time to determine  
which device is causing interference.  
Once you have determined which  
device is causing interference, move it  
further from the TV/DVD combo to  
eliminate the interference.  
• Make sure that the antenna or cable TV  
is connected correctly and securely.  
See “Connecting a cable or satellite  
box” on page 8 or “Connecting an  
antenna or cable TV (no box)” on  
page 10.  
• Make sure that Audio Only option is  
set to Off. See “Playing TV audio only”  
on page 23.  
• Adjust the brightness. See “Adjusting  
the TV picture” on page 21.  
• Make sure that the correct picture  
mode is selected. See “Adjusting the  
TV picture” on page 21.  
• If you are using an antenna, the digital  
channel signal may be low. To check  
the digital channel signal strength, see  
“Checking the digital signal strength”  
on page 26.  
• If you are using an antenna and the  
signal strength is low, adjust the  
antenna or use a highly directional  
outdoor antenna or set-top antenna  
with a built-in amplifier.  
• Make sure that the video cables are  
connected securely to the back of your  
TV/DVD combo.  
• The video cable(s) you are using may  
be bad. Try a new set.  
• Try another channel. The station may  
be experiencing problems.  
Double images.  
• Use a highly directional outdoor  
antenna, cable TV, or satellite TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
38  
DX-19LD150A11  
Troubleshooting  
Remote control  
Problem  
Solution  
The picture has a  
• A few bright or dark spots on an LCD  
screen is normal. It does not affect the  
operation of this TV/DVD combo.  
Problem  
Solution  
few bright or dark  
spots.  
Remote control  
does not work.  
• Make sure that the power cord is  
correctly connected to your TV/DVD  
combo and a power outlet.  
Good picture, but  
no sound.  
• Increase the volume.  
• Make sure that the sound is not muted.  
• Make sure that the correct audio mode  
is selected.  
• Make sure that there are no  
obstructions between the remote  
control and the remote control sensor  
on the front of the TV/DVD combo.  
• Point the remote control directly at the  
remote control sensor on your TV/DVD  
combo. For the location of the remote  
control sensor, see “Front” on page 4.  
• Make sure that the batteries are  
installed correctly. See “Installing  
remote control batteries” on page 15.  
• Replace dead batteries with new ones.  
See “Installing remote control  
• Make sure that the audio cables are  
connected correctly and securely to  
the back of your TV/DVD combo.  
• Make sure that the antenna or cable TV  
is connected correctly and securely.  
See “Connecting a cable or satellite  
box” on page 8 or “Connecting an  
antenna or cable TV (no box)” on  
page 10.  
• If you are using an antenna, the digital  
channel signal may be low. To check  
the digital channel signal strength, see  
“Checking the digital signal strength”  
on page 26.  
• The audio cable(s) you are using may  
be bad. Try a new set.  
batteries” on page 15.  
Trouble  
• See instructions and a table of  
common codes in “Programming a  
different universal remote control” on  
page 41.  
programming your  
existing universal  
remote control.  
• Codes are subject to change. For up to  
date codes, go to  
Poor picture  
• Make sure that the room is not too  
bright. Light reflecting off the screen  
can make the picture difficult to see.  
• If an S-VHS camera or a camcorder is  
connected while another connected  
device is turned on, the picture may be  
poor. Turn off one or more devices.  
www.dynexproducts.com.  
• Replace dead batteries with new ones.  
See “Installing remote control  
batteries” on page 15.  
• Refer to the User Guide that  
accompanied your universal remote  
control and contact the manufacturer  
if problems persist.  
Good sound but  
poor color  
• Adjust the contrast, color, and  
brightness settings.  
Audio noise  
• Other devices (for example, surround  
sound receiver, external speakers, fans,  
or hair dryers) may be interfering with  
your TV. Try turning off one device at a  
time to determine which device is  
causing interference. Once you have  
determined which device is causing  
interference, move it further from the  
TV/DVD combo to eliminate the  
interference.  
General  
Problem  
Solution  
No power  
• Make sure that the power cord is  
correctly connected to your TV/DVD  
combo and a power outlet.  
• Unplug the power cord, wait 60  
seconds, then plug the cord back in  
and turn on your TV/DVD combo.  
• Other devices (for example, surround  
sound receiver, external speakers, fans,  
or hair dryers) may be interfering with  
your TV/DVD combo. Try turning off  
one device at a time to determine  
which device is causing interference.  
Once you have determined which  
device is causing interference, move it  
further from the TV/DVD combo to  
eliminate the interference.  
No output from one  
of the speakers  
• Adjust the audio balance. See  
“Adjusting the sound settings” on  
page 23.  
• Make sure that the audio cables are  
connected correctly and securely to  
the back of your TV/DVD combo.  
After images appear • Do not display a still image, such as a  
logo, game, or computer image, for an  
extended period of time. This can  
cause a permanent after-image to be  
burned into the screen. This type of  
damage is not covered by your  
“No signal” error  
message is  
displayed  
• Press INPUT and make sure that you  
have selected the correct input for the  
device or service you are trying to use.  
• If you are using a cable or satellite box,  
use the remote that came with that  
box to change channels.  
warranty.  
After Auto  
• Reception can vary by channel  
depending on the broadcast power  
level of a given station. Contact your  
cable or satellite TV provider.  
Channel Search,  
there are no  
channels  
• Make sure the antenna or  
cable/satellite TV is connected  
securely to your TV/DVD combo.  
• Try replacing the cable between the  
antenna/cable or cable/satellite box  
and your TV/DVD combo.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
39  
Troubleshooting  
DX-19LD150A11  
Disc playback  
Problem  
Solution  
One or more  
channels do not  
display.  
• Make sure that the channels are not  
blocked. See “Setting parental control  
levels” on page 27.  
• Make sure that the channels are not  
hidden. The channel may have been  
deleted from the channel list. You can  
tune to the channel by pressing the  
number buttons or you can add the  
channel back to the channel list. See  
“Hiding channels” on page 25.  
• If you are using a cable or satellite box,  
use the remote that came with that  
box to change channels.  
• Make sure you have the correct input  
selected to view channels from the  
cable or satellite box.  
• If you are using an antenna, the digital  
channel signal may be low. To check  
the digital channel signal strength, see  
“Checking the digital signal strength”  
on page 26.  
Problem  
Solution  
Playback does not  
start.  
• No disc is loaded. Insert your disc into  
the disc slot.  
• The disc may be dirty. Clean the disc.  
• The disc is not supported. See page 41  
for a list of compatible disc formats.  
No picture.  
No sound.  
• The TV/DVD combo is not in DVD  
mode. Press INPUT and select DVD as  
the input source.  
• If an external speaker is connected,  
check its volume control.  
Picture distortion  
during fast  
reverse/forward  
playback.  
• The picture will be distorted  
occasionally. This is not a malfunction.  
Playback features  
failure.  
• The playback features such as  
stopping, skipping, or repeat play are  
not applicable to all discs.  
Password is lost.  
• Enter 9999 to access parental controls,  
then set a new password. See “Setting  
or changing the password” on  
page 27.  
The audio  
• The disc does not have multilanguage  
options encoded on it.  
soundtrack and/or  
subtitle language  
cannot be changed.  
Some settings  
cannot be  
accessed.  
• If a setting is grayed, the setting is not  
available in the current video input  
mode.  
No subtitle.  
• The disc has no subtitle encoded on it.  
• Subtitle option is set to Off. Press  
SUBTITLE to select preferred subtitle  
setting.  
TV/DVD combo  
cabinet creaks.  
• When the TV/DVD combo is in use, the  
temperature rises naturally and may  
cause the cabinet to expand or  
contract which can cause a creaking  
noise. This is not a malfunction.  
• The function is not applicable to the  
disc or to the current mode.  
“
” appears on  
the screen.  
Control buttons  
do not work  
• Make sure that the Button Lock  
option is set to Off. See “Locking  
control buttons” on page 29.  
USB photo display  
• Unplug the power cord, wait a few  
seconds, then plug the cord back in  
and turn on your TV/DVD combo.  
Problem  
Solution  
No photo display.  
• Make sure the USB flash drive is  
connected securely to the USB IN jack  
on the back of your TV/DVD combo.  
• The TV/DVD combo is not in USB  
mode. Press INPUT and select USB as  
the input source.  
TV/DVD combo  
keeps turning off  
• Make sure that the sleep timer is not  
turned on. See “Setting the sleep  
timer” on page 34.  
• Only those JPEG image files (with  
“.jpg” file extensions) can be displayed.  
Slide show does not • Make sure you select slide show when  
start.  
the photo thumbnail displays. See  
“Viewing photos in a slide show” on  
page 19.  
Note  
If the problem is not solved by using these  
troubleshooting instructions, turn off your TV/DVD  
combo, then turn it on again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
40  
DX-19LD150A11  
Specifications  
PC/VGA  
3.5mm PC audio input  
DVI  
1 (back)  
1 (back)  
1- HDMI port 1 (back)  
1 (back)  
Support JPEG and firmware  
upgrade  
Specifications  
Specifications are subject to change without notice.  
Warranty  
USB  
Parts: 1 year  
Labor: 1 year  
Outputs  
Dimensions and weight  
Video  
No  
Analog audio  
Digital audio  
WiFi  
Ethernet  
Headphone  
1 (back)  
1 (back)  
No  
No  
1 (back)  
Without stand:  
18.5 x 2.87 x 12.74 in  
(470 x 73 x 323.5 mm)  
With stand:  
18.5 x 7.19 x 14.37 in  
(470 x 182.5 x 365 mm)  
Without stand:  
8.82 lb. (4.0 kg)  
Audio  
Simulated Surround Sound No  
With stand:  
Sound Leveler  
Yes  
9.48 lb. (4.3 kg)  
Watts/channel  
Number of speakers  
3W x 2  
2
Screen  
Power  
Screen size measured diagonally  
Display type  
Panel 60 Hz vs.120 Hz  
Display resolution  
18.5"  
LCD  
60Hz  
720p  
On: <32.4 W  
Standby: <0.8 W  
120V/60Hz  
Power consumption  
Power input  
Panel resolution  
Aspect ratio  
1366 (H) × 768(V)  
16:9  
DVD player  
Contrast ratio (typical)–panel  
Brightness (center typical) cd/m2  
Comb filter  
Response time  
Horizontal viewing angle  
Vertical viewing angle  
1000:1  
250 nits  
3d y/c digital  
5 ms  
170°  
160°  
12 cm Digital Audio CD  
CD-R  
CD-RW  
12 cm DVD-Video  
DVD-R  
DVD-RW  
Disc compatibility  
DVD+R  
DVD+RW  
Display resolutions/VGA scan rates  
Suggested Resolutions: 1080p,  
DVD-R DL Dual Layer  
DVD-RW Dual Layer  
DVD+R Dual Layer  
DVD+RW Dual Layer  
HDMI 1.3  
1080i, 720p, 480p, 480i  
Suggested Resolutions: 1080p,  
1080i, 720p, 480p, 480i  
Suggested scan rates:  
640 × 480/60Hz,  
800 × 600/60Hz,  
1024 × 768/60Hz,  
1280 × 1024/60Hz,  
1680 × 1050/60Hz,  
1920 × 1080/60Hz  
Component video  
Miscellaneous  
PC/VGA  
OSD languages  
INlink  
Game Mode  
English, French, Spanish  
No  
No  
ENERGY STAR qualified No  
Tuner  
Internet connectable  
TV base screws  
No  
Analog  
Digital  
NTSC  
M4 type (18 mm length) (2 pcs)  
ATSC, 8-VSB, Clear-QAM  
V-Chip (version 2.0)  
Sleep timer  
Channel labeling  
VESA mount (mm)  
(horizontal × vertical)  
Yes  
Yes  
Yes  
Inputs  
2 (back)  
100 × 100  
HDMI 1.3  
E-EDID compliant  
HDCP compliant  
1 (back)  
Note  
Component video  
Composite video  
Shared audio (component,  
composite, and S-Video)  
The length of the wall-mount screws vary depending  
on the wall-mount bracket you purchased. See the  
instructions that came with the wall-mount bracket  
for screw lengths.  
1 (back)  
Yes  
S-Video  
1 (back)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
41  
Programming universal remote controls  
DX-19LD150A11  
Programming universal remote  
controls  
Set-top box makes and models  
068, 069, 078, 096, 100, 164,  
168, 229, 026  
Cablevision  
Programming a different universal  
remote control  
2002, 1204, 1423, 1517, 0171,  
1963, 0463, 1463, 0842, 1326,  
167, 415, 424, 450, 456, 461,  
507, 523, 567, 577, 586  
Charter  
You can operate your Dynex TV with a new or existing  
universal remote control.  
To program a different universal remote control:  
10171, 11204, 11326, 11463,  
11517, 11641, 11780, 11785,  
11892, 11963, 12002  
Comcast  
1 See the table below for common codes. If you have  
problems programming your remote or need a  
different remote control code, visit  
Cox  
1326, 1463  
www.dynexproducts.com/remotecodes for the  
latest remote control code information.  
10171, 11204, 11326, 11517,  
11564, 11641, 11963, 12002  
2 Follow your universal remote control’s instructions  
DirectTV  
to enter the TV code you found in Step 1.  
Tips  
Dish Network  
Time Warner  
720  
•
•
If your universal remote control has a code  
search feature, run a code search to identify a  
code that matches your TV. See your universal  
remote control’s instructions for details.  
If your universal remote control has a “Learn”  
feature, you can manually program it using the  
Dynex TV remote to “teach” the commands one  
at a time. See your universal remote control’s  
instructions for details.  
400, 450, 461, 456, 11463,  
1463, 0463  
TiVo  
0091  
Verizon  
0198, 0490  
Tips  
For additional help and information…  
•
The brand name is often visible on the front of  
the universal remote control, and the model  
number is often visible on the back.  
If your universal remote control isn’t listed on  
the chart, refer to your universal remote  
control’s instructions and try codes for the  
brands Orion, Emerson, Memorex, Sansui,  
Sylvania, or Zenith. You may need to try several  
codes before finding a match.  
1. Visit http://www.dynexproducts.com/remotecodes  
2. Call technical support for the universal remote control  
or cable/satellite company of the remote/set-top box you  
are trying to program.  
•
3. Call the Dynex Customer Care Center 1-800-305-2204  
Common universal remote control codes  
Notes  
•
•
This note only goes with TV/Blu-ray or TVs.  
The following codes may not provide full  
functionality. You may need to use the remote  
control that came with your TV, especially to  
control the Blu-ray or DVD functions.  
The following is a list of the most common remote control  
codes. Codes for other remote controls are available  
online at: www.dynexproducts.com/remotecodes, or  
check with your cable or satellite TV provide for the  
remote control code.  
Dynex TV codes for universal remote controls (for all  
Dynex TVs manufactured after Jan. 1, 2007)  
Universal remote control makes and models  
One for All  
Phillips  
RCA  
0054  
0198, 0490  
135  
068, 069, 078, 096, 100, 164,  
168, 229, 026  
Sony  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
42  
DX-19LD150A11  
Legal notices  
Legal notices  
FCC Part 15  
This device complies with Part 15 of the FCC Rules. Operation of this product is subject  
to the following two conditions: (1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may  
cause undesired operation.  
This equipment has been tested and found to comply within the limits for a class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of the following  
measures:  
•
•
•
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
•
Consult the dealer or an experienced radio/TV technician for help.  
FCC warning  
Changes or modifications not expressly approved by the party responsible for  
compliance with the FCC Rules could void the user’s authority to operate this  
equipment.  
Cables  
Connections to this device must be made with shielded cables with metallic RF/EMI  
connector hoods to maintain compliance with FCC Rules and Regulations.  
Canada ICES-003 statement  
This Class B digital apparatus complies with Canadian ICES-003.  
Standard Television Receiving Apparatus — Appareil de réception télévision ordinaire,  
Canada BETS-7 / NTMR-7  
HDMI  
HDMI, the HDMI logo, and High-Definition Multimedia  
Interface are trademarks or registered trademarks of HDMI  
Licensing LLC.  
Open Source Software  
For OPEN SOURCE SOFTWARE information please refer to the Open Source Notice section  
in the on-screen display (OSD)on the TV.  
If you require additional information or you wish to receive the complete corresponding  
GPL or LGPL licensed source code, please call the Dynex support line at 1-800-305-2204.  
This source code is available for a period of three (3) years from the date of the  
distribution of this product by Dynex.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
43  
Legal notices  
DX-19LD150A11  
•
•
•
•
•
Products sold “as is” or “with all faults”  
One-year limited warranty -  
Dynex Televisions  
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)  
Products where the factory applied serial number has been altered or removed  
Loss or Theft of this product or any part of the product  
Up to three (3) pixel failures (dots that are dark or incorrectly illuminated)  
grouped in an area smaller than one tenth (1/10) of the display size or up to five  
(5) pixel failures throughout the display. (Pixel based displays may contain a  
limited number of pixels that may not function normally.)  
Failures or Damage caused by any contact including but not limited to liquids,  
gels or pastes.  
US and Canada Market  
•
Definitions:  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE  
REMEDY FOR BREACH OF WARRANTY. DYNEX SHALL NOT BE LIABLE FOR ANY  
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR  
IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA,  
LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX PRODUCTS  
MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS  
AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY  
IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET  
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY  
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT  
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE  
LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE  
OR PROVINCE TO PROVINCE.  
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new  
Dynex-branded television (“Product”), that the Product shall be free of defects in the  
original manufacturer of the material or workmanship for a period of one (1) year from  
the date of your purchase of the Product (“Warranty Period”). For this warranty to  
apply, your Product must be purchased in the United States or Canada from a Best Buy  
or Future Shop authorized dealer of Dynex brand products only that are packaged with  
this warranty statement.  
How long does the coverage last?  
The Warranty Period lasts for 1 year (365 days) from the date you purchased the  
Product. Your purchase date is printed on the receipt you received with the Product.  
What does this warranty cover?  
Contact Dynex:  
For customer service please call 1-800-305-2204  
During the Warranty Period, if the original manufacture of the material or  
www.Dynexproducts.com  
workmanship of the Product is determined to be defective by an authorized Dynex  
repair center or store personnel, Dynex will (at its sole option): (1) repair the Product  
with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt  
comparable products or parts. Products and parts replaced under this warranty become  
the property of Dynex and are not returned to you. If service of Products or parts are  
required after the Warranty Period expires, you must pay all labor and parts charges.  
This warranty lasts as long as you own your Dynex Product during the Warranty Period.  
Warranty coverage terminates if you sell or otherwise transfer the Product.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2011 BBY Solutions, Inc.  
All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some  
countries. All other products and brand names are trademarks of their respective  
owners.  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail store location and your  
television Product has a screen size of less than 37 inches, please take your original  
receipt and the Product to any Best Buy or Future Shop store. Make sure that you place  
the Product in its original packaging or packaging that provides the same amount of  
protection as the original packaging. If you purchased the Product from a Best Buy or  
Future Shop online web site, mail your original receipt and the Product to the address  
listed on the web site. Make sure that you put the Product in its original packaging or  
packaging that provides the same amount of protection as the original packaging.  
To obtain in-home warranty service for a television with a screen 37 inches or larger, in  
the United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY for Future Shop call  
1-800-663-2275. Call agents will diagnose and correct the issue over the phone or will  
have a Dynex-approved repair technician dispatched to your home.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the product in the United States  
and Canada at Best Buy or Future Shop branded retail stores or websites.  
What does the warranty not cover?  
This warranty does not cover:  
•
•
•
•
•
•
•
•
•
•
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as power surges  
Accident(s)  
Misuse  
Abuse  
Negligence  
Commercial purposes/use, including but not limited to use in a place of  
business or in communal areas of a multiple dwelling condominium or  
apartment complex, or otherwise used in a place of other than a private home.  
Modification of any part of the Product, including the antenna  
Plasma display panel damaged by static (non-moving) images applied for  
lengthy periods (burn-in).  
•
•
•
•
•
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Attempted repair by any person not authorized by Dynex to service the Product  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
www.dynexproducts.com  
US and Canada Market - (800) 305-2204  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.  
© 2011 BBY Solutions, Inc. All rights reserved.  
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and  
brand names are trademarks of their respective owners.  
ENGLISH  
11-0915  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Continental Electric Fan KU33474 User Manual
Cypress Computer Hardware CY7C1007BN User Manual
Dacor Cooktop EWD24 User Manual
Dynex Network Router DX E402 User Manual
EverFocus Boiler EDSR1600F User Manual
Fender DJ Equipment MX 5216 User Manual
Fisher Price Motorized Toy Car 73610 User Manual
GE Cordless Telephone 55909320 User Manual
Global Machinery Company Portable Generator FCG001 User Manual
Globalsat Technology GPS Receiver GH 601 User Manual