Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver or game station
Connecting an antenna
Front and side features
Connect a 75 ohm cable (not included) to RF jack on the back of yourTV and
the RF OUT jack on the antenna.
Using HDMI (best)
Back of TV
Back of TV
15”/19“/22”LCD TV
ANT/CABLE IN
ANT/CABLE IN
QUICK SETUP GUIDE
ANT/CABLE IN
ANT/CABLE IN
DX-15L150A11/DX-19L150A11/DX-22L150A11
Power
indicator
Remote
control sensor
HDMI cable
(not included)
Installing the stand
1 Remove the stand from the box and place it on a table or bench.
2 Lay theTV on a ꢁat, cushioned surface.
3 Carefully align and insert the base into the stand until the locking
mechanism clicks into place.
HDMI device
Connecting a home theater system
Using digital audio cable:
Using component (better)
Back of TV
AUDIO IN
AC power
cord
L/R Audio cable
Component
video cable
Remote
control and 2
AAA batteries
Back of TV
Installing a wall-mount bracket
1 Carefully place yourTV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
ANT/CABLE IN
ANT/CABLE IN
2 Remove the three screws holding theTV to its stand column, then remove
the stand column.
ANT/CABLE IN
TV stand and 4 standoꢀ screws
Component video device
Component
video cable
Note:The DIGITAL OUTPUT jack only works with digitalTV channels.
Locating grooves
Connecting a Computer
Audio Cable
Back of TV
3 Insert and lock the standoꢀ screws (provided) into into the 4 holes on the
back of theTV..
4 Secure the wall-mount bracket to the back of yourTV by screwing four M4
screws provided with the bracket into the standoꢀ screws you just
installed.
ANT/CABLE IN
Using S-video (fair)
ANT/CABLE IN
Back of TV
Setting up your remote control
1 While pressing the release button on the battery compartment cover on
the back of the remote, lift the cover oꢀ the remote.
ANT/CABLE IN
Quick Setup Guide
2 Insert two AAA batteries into the battery compartment. Make sure that the
+ and – symbols on the batteries align with the + and – symbols in the
battery compartment.
Video device
S-video cable
3 Replace the cover.
To program your existing universal remote control to work with your new
DynexTV, see the table below for common codes. If you have problems
programming your remote or need a diꢀerent remote control code, visit
Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models
Set-top box makers and models
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
RCA
RCU807
One for All
URC-6690
Sony
RM-VL600
Comcast
M1057
Dish Network
VIP508, VIP622
Motorola
DRC800
TIVO
Series 3, HD
DirectTV
RC23
115
135
0464
8043
0463
720
0463
0091
10463
Download from Www.Somanuals.com. All Manuals Search And Download.
|