1
Insert the swivel head into the swivel
head slot on the back of the holder and
slide it into place until it is secure.
Attaching an MP3 device to
the holder
1
Repeatedly press the release button
on the side of the holder. The clamps
open.
2
3
4
Unfold the feet on the bottom of the
holder.
Adjust the clamps to fit the height of
your device.
Insert your device on the holder and
close the clamps by squeezing them
together tightly until your device is
secure.
DX-MP3MT
Bicycle and car mount for MP3 devices
2
3
Remove the thumbscrew on the bike
mount and set it aside.
Adjust the handlebar clamp to a
size that best fits your bike frame or
handlebars, then insert and securely
tighten the thumbscrew removed
earlier.
Holder (closed)
Package contents
Attaching to a bike
•
•
•
•
Bike mount
Car mount
Holder
Bike mount
360° swivel
head
Quick Setup Guide
Adjustment
knob
Caution: Do not adjust your Dynex bike
and car mount while riding a bike or
driving a car.
Swivel
head slot
Release
button
Thumbscrew
Features
Your Dynex bike and car mount securely
holds most MP3 players or smart phones
to your bike frame, handlebars, or car
window. Make sure that your electronic
device is securely fastened to the mount
before you begin your trip.
Swivel head
knob
Handlebar
clamp
Holder (open)
Clamps
Caution: This mount is not intended for
extreme off-road use. Excessive bumping
and jarring may result in damage to your
device.
4
Loosen the adjustment or swivel head
knobs to adjust the viewing angle, then
retighten.
Feet
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK SETUP GUIDE
|