®
LetraTag
LT-100T
User Guide . . . . . . . . . . . . . . . . . . . . . . . Page 2
Guide D’Utilisation . . . . . . . . . . . . . . Page 24
Gebruikershandleiding.........Pagina48
Bedienungsanleitung . . . . . . . . . . . Seite70
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd
1
09-01-2007 17:23:36
About Your New Labelmaker
°
With your new DYMO LetraTag® labelmaker, you can create a wide
variety of high-quality, self-adhesive labels. You can choose to print
your labels in many different font sizes and styles. The labelmaker
uses DYMO LetraTag (LT) 1ꢀ mm label cassettes. LT cassettes are
available in multiple colors of plastic and metallic tape, and in
white iron-on tape.
accessories for your labelmaker.
Warranty Registration
Please complete the warranty registration card and return it to
the appropriate Customer Support address within seven days. Visit
www.dymo.com/registration for details or to register online.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The labelmaker is powered by standard batteries or an AC power
adapter. To save power, the labelmaker will automatically turn off
after two minutes of inactivity.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd
3
09-01-2007 17:23:36
Inserting the Batteries
The labelmaker uses four high-capacity AA alkaline batteries.
To insert the batteries
1. Remove the battery compartment
cover. See Figure ꢀ.
ꢀ. Insert the batteries following the
polarity markings (+ and –).
ꢁ. Replace the cover.
Ç Remove the batteries if the
labelmaker will not be used for a long
period of time.
Figure 2
Connecting the Optional Power Adapter
An optional 9 Volt,1.5 A power adapter can also be used to power
the labelmaker. Connecting the AC adapter to the labelmaker
disconnects the batteries as a power source.
To connect the power adapter
1. Plug the power adapter into the power connector on the top of
the labelmaker.
ꢀ. Plug the other end of the power adapter into a power outlet.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd
4
09-01-2007 17:23:36
Ç Make sure the labelmaker power is turned off before you
disconnect the power adapter from the main power source.
Otherwise, your most recent memory settings will be lost.
Inserting the Label Cassette
Your labelmaker comes with one
label cassette. Visit www.dymo.
com for information about purchasing
additional label cassettes.
Figure 3
To insert the label cassette
1. Lift the label cassette cover to open
the label compartment.
See Figure ꢁ.
Ç Before using the labelmaker for
the first time, remove the protective
cardboard insert from label exit slot.
See Figure ꢂ.
Figure 4
ꢀ. Insert the cassette with the label positioned
between the print head and pinch roller.
ꢁ. Press firmly until cassette clicks into place.
ꢂ. Close the label cassette cover and press â to turn on the power.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd
5
09-01-2007 17:23:37
Selecting a Language
The first time you turn on the power, you are asked to select your
desired language. By default, the language is set to English. The
language option you choose determines the character set that is
available.
To select a language
1. Press ä.
ꢀ. Use the up or down arrow key to select Language and press ã.
ꢁ. Use the up or down arrow key to select the language you want
and press ã.
Setting the Date and Time
You need to set the current date and time so that the date is correct
if you choose to automatically insert a date on your label.
To set the date and time
1. Press ä.
ꢀ. Use the up or down arrow key to select Set Date and press ã.
The default date is displayed.
ꢁ. Use the left or right arrow key to move the cursor over each
setting (month, day, and year) and use the up or down arrow
keys to increase or decrease the value.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd
6
09-01-2007 17:23:37
ꢂ. When finished, press ã. The default time is displayed.
5. Use the left or right arrow key to move the cursor over each
setting (hours and minutes) and use the up or down arrow keys
to increase or decrease the value.
ꢃ. When finished, press ã.
Printing Your First Label
You are now ready to print your first label.
To print a label
1. Enter text to create a simple label.
ꢀ. Press å.
ꢁ. Press the cutter button to cut the label.
Congratulations! You printed your first label. Continue reading to
learn more about the options available for creating labels.
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd
7
09-01-2007 17:23:37
Getting to Know the Labelmaker
Become familiar with the location of the feature and function keys
on your labelmaker. Refer to Figure 1 on the inside front cover. The
following sections describe each feature in detail.
Power
The â button turns the power on and off. After two minutes of
no activity, the power is switched off automatically. The last label
created is remembered and displayed when the power is turned
back on. The previously selected style settings are also restored.
You can also press â to cancel printing and return to edit mode.
LCD Display
You can enter up to 100 characters and
spaces on a label; however, the display
will only show a small portion of the
characters. And, with DYMO’s exclusive
graphical display, any formatting you
≠
Font size
# lines
ß
CAPS
add is visible instantly.
Æ
∞
Num Lock
For example, the italics and rounded
border added to the text in Figure 5
are clearly displayed.
Figure 5
Feature indicators appear along the top of the display to let you
know when a feature is selected.
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd
8
09-01-2007 17:23:37
CAPS Mode
The [ key toggles capitalization on or off. When CAPS mode is
turned on, the CAPS mode indicator is shown on the display and all
letters that you enter will be capitalized. The default setting is CAPS
mode on. When CAPS mode is off, all letters appear in lower case.
Num Lock
The ñ key provides access to the numbers located on some of
the alphabetic keys. When Num Lock mode is turned on, the Num
Lock indicator is shown on the display and the numbers 0 through
9 appear when you press the corresponding letter keys. Num Lock is
turned off by default.
Backspace
The ó key removes the character to the left of the cursor.
Clear
The î key clears all label text and formatting.
Navigation Keys
You can review and edit your label using the left and right arrow keys
on the Navigation key. You can navigate through menu selections
using the up and down arrow keys, and then press
ã
to make a selection.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd
9
09-01-2007 17:23:37
Cancel
The ú key allows you to exit from a menu without making a
selection or to cancel an action.
Format
The ô key displays the Size, Style, and Borders submenus. These
formatting features are described later in this User Guide.
Insert
The ò key allows you to insert symbols, a second line, or the
date on your label.
Settings
The ä key displays the Preview, Language, Set Date, and Set
Contrast submenus. These features are described later in this User
Guide.
Formatting Your Label
You can choose from a number of formatting options to enhance
the appearance of your labels.
Changing the Font Size
Five font sizes are available for your labels: Extra Small, Small, Medium,
Large, and Extra Large. When you select a size, that size
applies to all characters on a label.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 10
09-01-2007 17:23:37
To set the font size
1. Press the ô key.
ꢀ. Use the up or down arrow keys to select Size and press ã.
ꢁ. Use the up or down arrow keys to select the desired font size and
then press ã.
Adding Font Styles
You can choose from six different font styles:
AaAbCc
AaAbCc
AaAbCc
Normal
Bold
Italic
Outline
Shadow
Vertical
Ä
When you select a style, that style applies to all characters. Styles
can be used with alphanumeric characters and some symbols.
To set the font style
1. Press ô.
ꢀ. Use the up or down arrow key to select Style and press ã.
ꢁ. Use the up or down arrow key to select a font style and press ã.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 11
09-01-2007 17:23:37
Creating Two-Line Labels
You can print a maximum of two lines on labels.
To create a two-line label
1. Type the text for the first line and press ò.
ꢀ. Use the arrow keys to select Second Line and press ã. A multi-
line symbol is inserted at the end of the first line, but will not
print on the label.
ꢁ. Type the text for the second line.
Adding the Date
You can insert the date on your label. The date format is MMM DD,
YY (US) or DD MMM YY (Europe) depending upon the version of
your labelmaker.
To insert the date
1. Press ò.
ꢀ. Select Date and press ã.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 12
09-01-2007 17:23:38
Adding Box and Underline Styles
You can highlight your text by choosing a box or underline style.
Underline
Square
Edged
Ì
Ò
Û
Ù
Â
Á
Train
Pointed
Sweet Hearts
Flowers
È
Î
Rounded
Crocodile
Ô
A label can be underlined or enclosed in a box, but not both
together.
To add an underline or box style
1. Press ô.
ꢀ. Select Borders, and press ã.
ꢁ. Select underline or a box style and press ã.
On two-line labels, both lines are underlined. In box style mode, all
the lines are enclosed in one box style.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 13
09-01-2007 17:23:38
Using Symbols and Special Characters
Symbols and other special characters can be added to your labels.
Adding Symbols
The labelmaker supports the extended symbol set shown below.
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 14
09-01-2007 17:23:38
To insert a symbol
1. Press ò, select Symbols, and press ã. The first row of
symbols shown in the table appears in the display.
ꢀ. Use the arrow keys to move to the desired symbol. The left and
right arrows move horizontally along a row of symbols. The
up and down arrow keys scroll vertically through the rows of
symbols.
ꢁ. When you locate the symbol, press ã to add the symbol to your
label.
The labelmaker remembers the last symbol used. The next time
you choose to insert a symbol, the last symbol that you used is
automatically selected.
Adding International Characters
The labelmaker supports the extended Latin character set using
RACE technology. Similar to using a mobile phone keypad, when
you hold down a letter key for longer than one second, you will
scroll through variations on that letter. To insert the character,
release the key when the desired character appears.
For example, if French is selected as the language and you hold
down the letter a, you will see a à â æ and so on through all the
variations available. The character variations and the order in which
the variations appear depend on the language you have selected
to use.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 15
09-01-2007 17:23:38
Printing Options
You can preview your label and adjust the printing contrast.
Previewing Your Label
You can preview the text or format of your label prior to printing. A
two-line label is previewed as a single-line label with a line break
character between the two lines.
To preview your label
1. Press ä.
ꢀ. Select Preview and press ã.
The text of the label scrolls across the display.
Adjusting the Print Contrast
You can adjust the print contrast to fine tune the print quality of
your label.
To set the contrast
1. Press ä.
ꢀ. Select Set Contrast and press ã.
ꢁ. Use the arrow keys to select a contrast setting and press ã.
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 16
09-01-2007 17:23:38
Using Labelmaker Memory
The labelmaker has a powerful memory feature that allows you to
store the text of up to nine labels you use frequently.
Storing Label Text
You can store up to nine specific labels you use frequently.
To store the current label text
1. Press ö. The first of the memory fields is displayed.
ꢀ. Use the arrow keys to move through the fields. You can store new
text in any of the memory locations.
ꢁ. Select a memory location and press ã.
Your label text is saved and you are returned to the label.
Recalling Stored Labels
You can easily recall labels stored in memory to use at a later time.
To recall labels
1. Press õ. The first memory location is displayed similar to
storing a label or format.
ꢀ. Use the arrow keys to select a label to recall and press ã.
To clear a memory field, first recall a label and then press î.
1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 17
09-01-2007 17:23:38
Caring for Your Labelmaker
Your labelmaker is designed to give you long and trouble-free
service, while requiring very little maintenance. Clean your
labelmaker from time to time to keep it working properly. Clean the
cutter blade each time you replace the label cassette.
To clean the cutter blade
Press in and hold
1. Dampen a cotton ball with alcohol.
ꢀ. Remove the label cassette.
ꢁ. Place the tip of a ball-point pen or
pencil on the black post as shown in
Figure ꢃ, and press the post down.
Print head
Figure 6
ꢂ. While holding down the post, press and
hold the cutter lever to expose the cutter blade.
5. Release the post and clean both sides of the blade with the
cotton ball.
ꢃ. Release the cutter lever.
ÇYou can also follow this procedure if the cutter blade becomes
lodged in the forward position and will not move.
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 18
09-01-2007 17:23:38
To clean the print head
1. Remove the label cassette.
ꢀ. Remove the cleaning tool from inside the label compartment
cover.
ꢁ. Gently wipe the padded side of the tool across the print head.
See Figure ꢃ.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 19
09-01-2007 17:23:38
Troubleshooting
Review the following possible solutions if you encounter a problem
while using your labelmaker.
Problem/Error Message
Solution
No display
•
•
Ensure the labelmaker is turned on.
Replace discharged batteries.
Poor Print Quality
•
•
•
•
Replace batteries or attach power adapter.
Ensure label cassette is installed properly.
Clean the print head.
Replace the label cassette.
Poor Cutter Performance
Clean the cutter blade. See Caring for Your
Labelmaker.
No action required.
Printing
Message disappears when printing is finished.
Too many characters
Exceeded maximum number of
characters in buffer.
Delete some or all of the buffer text.
Replace batteries or connect AC power adapter.
Battery low
Batteries almost discharged.
•
•
Remove jammed label; replace label cassette.
Clean cutter blade.
Tape Jam
Motor is stalled due to label jam.
If you still need assistance, contact DYMO Customer Support. See
Contacting Customer Support at the back of this User Guide to
locate the contact number for your country.
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 20
09-01-2007 17:23:38
Documentation Feedback
We are constantly working to produce the highest quality
documentation for our products. We welcome your feedback.
Send us your comments or suggestions about our user guides.
Please include the following information with your feedback:
• Product name, model number, and User Guide page number
• Brief description of instructions that are inaccurate or unclear,
areas where more detail is needed, and so on
We also welcome your suggestions about additional topics you
would like to see covered in the documentation.
Send email messages to: [email protected]
Please keep in mind that this email address is only for
documentation feedback. If you have a technical question, please
contact Customer Support.
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 21
09-01-2007 17:23:38
Environmental information
The equipment that you bought has required the extraction and use of natural
resources for its production. It may content hazardous substances for the health and
the environment.
In order to avoid the dissemination of those substances in our environment and
to diminish the pressure on the natural resources, we encourage you to use the
appropriate take-back systems. Those systems will reuse or recycle most of the
materials of your end life equipment in a sound way.
The crossed-bin symbol marked in your device invites you to use those systems.
If you need more information on the collection, reuse and recycling systems, please
contact your local or regional waste administration.
You can also contact us for more information on the environmental performances of
our products.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 22
09-01-2007 17:23:38
This product is CE marked in accordance with the EMC directive and the low
voltage directive and is designed to conform with the following international
standards:
US FCC Class B Compatibility
Safety - EN ꢃ0950, IEC 950, UL 1950
EMC Compatibility EN ꢃ1000 ꢁ-ꢀ/ꢁ; EN ꢃ1000 ꢂ-ꢀ/ꢁ/ꢂ/5/ꢃ/ꢅ/11; ENV 50ꢀ0ꢂ;
EU Immunity - EN 550ꢀꢂ & addendum A1, Aꢀ Electromagnetic Compatibility (EMC) -
Information Technology equipment, Immunity Characteristics
Emissions – EN ꢃ1000-ꢃ-ꢁ: Electromagnetic Compatibility (EMC) - Part ꢃ:
Generic Standards
- Section ꢁ: Emission standard for residential, commercial and light industrial
environments.
RoHS ꢀ00ꢀ/95/EC
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
LT Momentum WEU.indd 23
09-01-2007 17:23:39
|