XL1500 Food Processor
Instruction Manual & Guarantee
Download from Www.Somanuals.com. All Manuals Search And Download.
•
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
designed for use with food items
only
ingredients through the feed tube
•
The processor features an overheat
cut-out that cuts the power if it
becomes too hot for any reason. If
this occurs turn the control knob to the
OFF position. Once it cools down, the
safety cut-out will automatically reset
itself within one hour and the power
will be restored
•
Before each use, check that the
bowls contain only the ingredients
and nothing else
•
•
Do not process boiling or hot liquids
Bowls and attachments are not
suitable for microwave use
responsible for their safety
•
When moving the processor, use both
hands and lift holding the base unit.
Never lift the processor using the bowl
handle
•
•
•
Ensure the bowl(s), accessory(s),
lid and food pusher are all securely
in place before turning the processor
on. It will not work without the large
bowl and lid in place and locked
•
•
•
Do not submerge the motor housing,
cord or plug in water or any other
liquids
Clean all parts after each use; please
refer to the cleaning instructions on
page 18
•
•
Never tamper with the safety systems.
They are included for your personal
safety
Only use the food pusher supplied
to insert and push ingredients down
the feeder tube. Never use your fingers
or utensils; this could cause severe
injury and also damage the appliance
If your ingredients include raw meat,
make sure the bowls and attachments
are cleaned thoroughly, immediately
after use
The blades and discs are extremely
sharp; take extra care when handling
these parts, especially when removing
from the bowl, emptying the bowl and
during cleaning. Avoid touching the
sharp edges
Do not overfill the bowls; ingredients
need room to move around. Use the
maximum loading chart on page 21 for
reference
•
When using a dishwasher, always set it
to the lowest setting (max 40ºC) and
keep bowls and accessories well away
from the heating elements. Avoid the
drying cycle.
•
•
The use of attachments not
recommended or sold by Dualit may
cause fire, electric shock or injury to the
user or the appliance
•
•
Always turn the power off via the
control knob before opening the lid
Switch off the appliance and disconnect
from supply before changing accessories
or approaching moving parts while in
use
Use the spatula only when the unit is
turned off, the blade or discs are
removed and the processor is
unplugged
SAVETHESE
INSTRUCTIONS
In the interest of improving products,
Dualit Ltd. reserves the right to change the
product specification without prior notice.
•
•
Never remove the bowl or lid until the
blades or discs have come to a
complete stop
•
•
•
Store the tool tray out of reach
of children
Never operate the processor with the
bowls empty.
Never touch moving parts or insert
your hand or utensils into the bowl.
Use the food pusher provided to guide
Do not misuse the processor; it is
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
KNOW YOUR FOOD PROCESSOR
STAY FRESH LID
FOOD PUSHER
Chopping blades
Dough blade
Spindle
Use on the bowl drive to
Features easy to read
measurement markings.
Chops, minces, blends and
Perfect for making bread
mixes in a matter of seconds. dough and pastries.
attach accessories.
LID WITH
FEED TUBE
Easy to assemble and clean.
Medium bowl
Large bowl
Small bowl
Use this as a secondary
bowl. This is also the best
bowl when using slightly
smaller quantities.
Use this bowl for all liquids
(it has a sealed drive). It
offers the maximum
working capacity.
Perfect for everyday
processing tasks like chopping
herbs or puréeing baby food.
The small bowl must sit inside
the medium bowl.
WORK BOWL
WITH SEALED DRIVE
Features the largest working
capacity.
Grating/shaving disc
Shredding disc
Julienne disc
Ideal for grating hard cheeses Can shred most vegetables Quick preparation for
POWER
INDICATOR LIGHT
and shaving chocolate.
into fine food.
stir-fry’s and salads.
CONTROLS
Main On/Off, Start/Stop, Pulse
and Auto Pulse
Adjustable slicer
E-Disc
Spatula
For quick and easy removal of
ingredients.
A precision sharp slicing
blade, height adjustable for
different thickness slicing.
Will emulsify liquids and
whisk egg whites in
seconds.
CORD
STORAGE
SUCKER FEET
HANDLE
GRIPS
Use the toolbox for storing most of the accessories
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PROCESSING BOWLS & LID
BLADES & SPINDLE
You will always need to use the large bowl first, no matter what other bowls and
attachments you wish to use.
Do not Use blaDes for longer than 45 seconDs at a time. Allow
processer to cool if you go over the max run time. CAUTION, BLADESAREVERY SHARP.
LOCK LARGE BOWL
SMALL BLADE
POSITION BODY
LARGE BOWL
3
LARGE BLADE
MEDIUM BLADE
3
2
2
1
1
3rd
2nd
2nd
1st
CLICK
1st
Before you assemble the food
processor, ensure that the
power cord is unplugged, and
placed facing you on a dry,
level surface. Push down on
the body to secure firmly.
Handle blades and attachment
using only the central plastic
section. The large chopping
blade locates directly onto
the bowl drive, once the large
bowl is locked in place.
Place the large bowl onto
the main body, with the
handle pointing to the right
(four o’clock).
Hold the handle and turn it
clockwise until you hear and
feel it lock in to place.
The medium chopping blade The small chopping blade
also locates directly onto the needs to be used with the
bowl drive, once both large
and medium bowls are in
place.
spindle. This must be
attached to the bowl drive
once the large and medium
bowls are in place, and before
locating the small bowl.
SPINDLE IN
1
SPINDLE IN
2
SPINDLE IN
3
ADDITIONAL
BOWLS
ALIGN BOWLS
ATTACH LID &
LOCK INTO PLACE
1
2
3
LARGE BOWL
MEDIUM BOWL
SMALL BOWL
3rd
2nd
1st
2nd
1st
When using the medium
bowl, insert this into the
large bowl. When using the
small bowl insert this into
the medium bowl.
The medium bowl will
self-locate into the large
bowl. The groove on the
small bowl must allign with
the pip on the medium
bowl.
To attach the lid, place it on
the large bowl aligning to
the slots on the bowl rim. To
lock, hold the large bowl
handle, and with your other
hand, hold the base of the feed
tube and rotate clockwise.
The spindle locates on to
the bowl drive on the large
processing bowl.
When using the medium
bowl, place it in the large
bowl then the spindle on the bowl with medium bowl,
When using the small bowl
with blade, place in the large
bowl drive.
spindle in position, then place
the small bowl and small blade
on the spindle.
Small bowl must be used
with the medium bowl.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
GRATING & SHREDDING DISC
VARIABLE SLICING & JULIENNE DISC
take caUtion as blaDes are sharp. Do not use with Auto pulse.
Do not Use Discs for longer than 45 seconDs at a time. Allow
processer to cool if you go over the max run time. Do not use Discs with Auto pulse.
LOCATE ON BOWL
SELECT GRATE
LOCK ON SPINDLE
3
1
2
FOR LARGE &
MEDIUM BOWLS
SLICE THICKNESS
LOCK ON SPINDLE
3
1
2
OR
Select the fine or coarse side
of the grating/shaving disc to
suit your requirement.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
Place the reversible grating
disc on the spindle and push disc assembly onto the bowl
down firmly to locate.
Place the spindle and grating
To adjust the slicing thickness,
rotate the outer spindle
anti-clockwise to make slices
thicker, or clockwise to make
thinner slices. NOTE: Very sharp.
Hold plastic to avoid injury.
Fit the slicing disc over the
spindle and press firmly into can only be used with the
place.
The adjustable slicing disc
drive of large processing
bowl.
large and medium bowls.
It creates any slice thickness
between 0.5mm and 7.5mm.
SELECT SHRED
LOCK ON SPINDLE
LOCATE ON BOWL
1
2
3
CORRECT WAY UP
LOCK ON SPINDLE
FOR LARGE &
MEDIUM BOWLS
1
2
3
OR
Select the fine or coarse side Place the reversible
of the shredding disc to suit shredding disc on the spindle shredding disc assembly onto
Place the spindle and
only be
Fit the julienne disc over the The julienne disc can
The julienne disc must be
used with the large and
medium bowls.
inserted with the cutting face spindle and press firmly into
your requirement.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
and push down firmly to
locate.
the bowl drive of large
processing bowl.
upwards.
place.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
E-DISC & DOUGH BLADE
SPATULA
Do not use Discs with Auto pulse. The E-disc can only be used with the large bowl,
and only with liquids (including cream, egg whites and dressing).
ADDING LIQUIDS
SETUP THE E-DISC
LOCATE E-DISC
3
2
1
USE SPATULA
TURN OFF
REMOVE BLADES
3
1
2
Attach the spindle onto the
centre of the E-disc. Push
down until you hear and feel
it lock into place.
Place the E-disc assembly
directly onto the bowl drive successfully, add additional
in the large bowl.
To emulsify liquids
Be careful not to touch the
cutting blades with your
hands when you use the
spatula to scrape the inside
of the bowl.
Use the spatula to
Always turn off the power
by pressing START/STOP
button THEN the MAIN
POWER button, finally,
unplug the processor before
using the spatula.
redistribute ingredients that
have built up around the
sides of the bowls, or to
help decant ingredients from
bowls to other containers.
liquids slowly through the
feeder tube.
LOCATE DOUGH
BLADE
ADDING DRY
INGREDIENTS
ADDING LIQUIDS
1
2
3
The dough blade can only
be used with the large bowl. adding any liquids.
Add dry ingredients before
Liquids can be added slowly
through the feeder tube.
NOTE: DO NOT USE DISCS
Place the dough blade
directly onto the bowl drive
in the large bowl.
FOR LONGER THAN 45
SECONDS AT A TIME.
Allow processer to cool if you
go over the max run time.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTINUOUS PROCESSING
PULSE & AUTO PULSING
IF THE PROCESSING BOWL AND LID ARE NOT CORRECTLY
ONLY USE THESE FEATURES WITH THE CHOPPING BLADES AND DOUGH BLADE.
The Pulse and Auto Pulse feature is perfect for mixing in foods without puréeing the mixture.
ImPORTANT:
ASSEMBLED, THE FOOD PROCESSOR WILL NOT FUNCTION.
MAIN POWER ON
SETUP PROCESSOR
ADD FOOD
3
SET UP PROCESSOR
PUSH TO PULSE
2
2
1
1
Set up the processor with the
appropriate attachments.
NOTE: DO NOT USE
Turn the main power ‘ON’.
Add food items to be
chopped and close the lid or turn the main power 'ON'.
Plug in the power cord and
Press the ‘PULSE’ button to
start processing. The blade
will only rotate when the
PULSE button is pressed.
just lock the lid ready for
The power light will
items to be feed through
illuminate.
BLADES FOR LONGER
THAN 45 SECONDS AT A
TIME.Allow processer to cool if
you go over the max run time.
the feed tube.
START PROCESSING
FEEDING FOOD
TURNING OFF
TURN ON
AUTO PULSE
TO CANCEL
4
5
6
1
2
3
Using the START/STOP
button on the control panel, the feed tube using the food button to stop processing.
press once to start
processing.
Feed items gently through
Press the START/STOP
For auto pulsing, prepare
the food processor as if
continuous processing.
Press the ‘AUTO PULSE’
button to start processing.
The blade will automaticaly
pulse 10 times. To stop mid
To stop mid cycle press
‘START/STOP’ button.
pusher. Let the disc do the
Exerting too much
Turn the main power ‘OFF’
before removing bowl,
attachments or processed
work.
pressure will damage your
Turn the main power ‘ON’. cycle press ‘START/STOP’
button.
machine.
NEVER USE YOUR foods.
FINGERS!
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PROCESSING TIPS
WHEN RUNNING THE PROCESSOR
ADDING INGREDIENTS
Do not run for more than 45 seconds at a time. Allow the processor to cool to room
temperature if you go over the max run time.
When various recipes require dry ingredients such as flour, add them directly into the
bowl before processing. There is no need to sift ingredients when using your food
processor. Liquid ingredients may be added while the processor is operating
USING THE BOWLS
Always try and start with the tasks that require the smallest bowl first, so that you are
removing the used bowls instead of putting clean bowls inside dirty ones. To insert the
small bowl the groove must align with the pip on the medium bowl.
NOTE:
by pouring through the feed tube in the processor cover.
semi-liquid ingredients, stop the food processor and scrape down the container sides with
the spatula provided.
When processing sauces or
USING THE FEED TUBE
AUTO PULSE
For best results when slicing, the feed tube should always be packed firmly to allow each
piece of food to support the others. The most important factor for successful slicing and
Use this feature to achieve greater control for delicate foods or for a more even chop. The
Auto Pulse feature is perfect for mixing in foods without puréeing the mixture. It also
allows you to prepare ingredients for frying or casseroles gently whilst preserving their
integrity. When selected the power light flashes, Press again to stop (or press PULSE) If you
press START/STOP you will move to constant processing.
NOTE: Never use
shredding is the way in which the food is packed into the feed tube.
fingers to push food down the feed tube. Always use the food pusher.
a small portion of food left unprocessed between the food pusher and the blade. When
preparing longer slices, pack food items horizontally.
There will always be
CHOPPING
EMULSIFYING EGG WHITES
TIP: Use Auto Pulse for this process.
Use the E-disc and a minimum of two/three egg whites for best results.
Try to process pieces of food that are approximately equal in size. When you break, cut or
tear food into uniform pieces before you begin processing, the finished results will be more
uniform. More consistent processing results are achieved if the bowl is not overloaded.
PREPARING SHORTER SLICES
Pack the food items vertically in the feed tube, for best results when shredding and grating.
Remember that softer foods such as cheese (cheddar, mozzarella or Swiss) should be well
chilled before processing. Harder foods such as Parmesan or Romano cheese should be at
MINCING
Pre-cut meat into cubes approximately 2cm square and use the chopping blade.
NOTE:
room temperature before processing.
lot of pressure to the food pusher.
When grating Parmesan cheese do not apply a
VEGETABLES
When processing vegetables such as onions, peel and quarter or cut large vegetables into
smaller evenly sized chunks.
LIQUIDS
To maximise the capacity of the largest bowl when making soups use the Auto Pulse
feature rather than START/STOP button when processing. To start, add the food chunks
and use Auto Pulse, gradually adding the liquid through the feed tube. If mixture overflows or
fails to blend, stop processing, remove some of the ingredients and process in smaller
amounts.
MIXING
TIP: We recommend using Auto Pulse when adding hole ingredients to a mixture e.g.
sultanas into a scone mix.
The quantities that can be processed within the processing bowls will vary with the density
of the mixture.
DISASSEMBLY
When processing is completed. Turn off and dismantle the processor, clean and dry all parts.
Store the bowls, medium blade and lid with food pusher assembled on the processor body.
Do not lock the bowl lid whilst in storage. This can damage the safety mechanism built into
the bowl. NOTE: Always wait for the processing blade to stop moving completely before
removing the lid. Warning: Use extreme caution, as blades are sharp.Always
WHEN SLICING, SHREDDING AND GRATING
Cut all ingredients to a size that fits comfortably into the feed tube. Pack the feed tube and,
while holding food steady and upright with the food pusher, press down evenly until all
ingredients are sliced or shredded. The more firmly you push, the thicker the slices or
shreds. Do not use excessive force or you may damage the food processor.
handle the chopping blade by its central plastic section.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING & MAINTENANCE
STORING YOUR PROCESSER
IT IS ImPORTANTTO CLEANTHE PROCESSOR AND ALL PARTS AFTER
EACH USE.THIS WILL PROLONGTHE LIFE OFYOUR APPLIANCE.
TAKE CAUTION WHEN HANDLINGTHE BLADES AND DISC,THEY ARE
ALLVERY SHARP. KEEPTHETOOLBOX OUT OF REACH OF CHILDREN.
TURN OFF &
DISMANTLE
UNLOCK LID
3
UNPLUG
CLEAN & DRY
3
2
WIPE CLEAN
2
1
1
UNPLUG
ALWAYS SWITCH OFF
AND UNPLUG BEFORE
ANY CLEANING. NEVER
USE ABRASIVE CLEANERS
ON ANY OF THE PARTS.
TAKE EXTRA CARE WHEN
WASHING BLADES.
ENSURE THE PROCESSOR
IS UNPLUGGED WHILST
IN STORAGE, WITH THE
LID UNLOCKED.
THOROUGHLY CLEAN
AND DRY.
Dismantle the attachments
and bowls from the main
unit before you start
cleaning.
Wipe the main body with a
damp cloth. Dry immediately.
Dismantle the processor,
clean and dry all parts.
Store the bowls and lid with
food pusher assembled on the
processor body. Do not lock
the bowl lid whilst in storage.
This can damage the safety
mechanism built into the bowl.
Do not immerse base in
water.
STORE IN A
6
CLEAN
IMMEDIATELY
DISHWASHER
POSITIONING
USE TOOL TRAY
CORD TIDY
4
5
6
4
5
SAFE PLACE
TOP RACK
ONLY
40oC
Wash the bowl, lid, blades
and discs immediately after
each use with warm soapy
water. Use a small brush to
get to hard-to-reach areas.
All attachments and bowls
excluding the main body are parts on the top rack of
suitable for dishwasher use.
Only put the food processor
The chopping blades, dough Excess power cord can be
blade, spindle, spatula and all stored in the cord tidy on
discs should be stored in the the underside of the
Remember to store all
accessories in the same
mannor you would store
sharp knives, away from
children and away from
the edge of a shelf.
your dishwasher and keep
them well away from the
heating elements.
toolbox provided.
processor.
Use a wash cycle below
40°C. Remove prior to
drying cycle.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
MAXIMUM LOADING CHART
Use the chart below as a guide to determine the maximum amount of ingredients to be
processed at one time in the large bowl.
What do I do if my processor does not
turn on?
What if it doesn’t chop uniformly?
•
Blades or discs may not be attached
properly.
•
Ensure the bowl and lid are locked in
position.
Ingredients
Bread Dough
Minced Meat
Soup
Large Bowl
1.4Kg
•
You may be exerting too much force
on the food while pushing down
the feeder tube.
•
Check that the small bowl has properly
located onto the medium bowl. If not
the lid will not locate properly and the
processor will not turn on.
What if my egg whites won’t
stiffen up?
1.45Kg
•
•
Check the plug is correctly fitted in the
outlet and the power supply is switched
on.
•
You may not be using enough eggs
(we recommend a minimum
of two eggs).
2.25L
using Auto Pulse
Check the fuse in the plug. Ensure the
new fuse is the same current value as
original.
•
You may be using the wrong accessory;
for egg whites you need the E-disc and
the large bowl.
Victoria sponge mix
Shortcrust pastry
Sliced food
8 eggs
1.4Kg
1.8Kg
3-8
What if it switches itself off while I’m
using it?
•
•
You may not be whisking for long
enough.
•
The motor may have overheated. To
prevent damage, the unit will
automatically cut all power. If
this happens, turn switch to ‘OFF’,
unplug and allow the unit to cool for
approximately one hour.
Your bowl must be completely clean
and dry.
What if the drive shaft is sticking or the
motor is struggling to turn the mixture?
Egg Whites
Once cool the overheat safety feature
will reset and you can carry on
using the processor.
•
The mixture may be too dense,
remove some of the mixture and
process in batches.
•
Check the lid or large bowl has not
become loose.
•
Run the motor for no more than
15 seconds allowing for a one minute
pause between cycles. This allows the
machine to cool down to room
temperature before next use.
•
After five cycles the appliance should
be cooled down to room temperature
before the next use.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE
This appliance is of excellent quality and construction. However, if any defects in materials
or workmanship do appear during the relevant guarantee period, we will, at our discretion,
either repair or replace the defective parts, free of charge, subject to the terms and
conditions of our Guarantee shown below.
This Guarantee covers both parts and
labour. Carriage is not included.
•
Your mains electricity supply is
functional.
Your guarantee period is as follows:
•
The defect is not due to a blown fuse.
•
•
12 year guarantee on the motor,
3 year guarantee on parts.
If you wish to claim under this Guarantee
you should:
This Guarantee provides benefits that are
additional to, and do not affect, your
statutory rights. This guarantee does not
cover the cost of returning the product to
the dealer from whom it was purchased or
to ourselves. This guarantee applies only to
products sold and located in mainland
Great Britain. It does not cover liability in
respect of or replacement of plugs, cables
or fuses and also does not cover defects
due to:
•
•
•
Send the product, postage or carriage
paid, to the dealer from whom it was
purchased or to Dualit direct.
Ensure that the product is clean and
packed carefully (preferably in its
original carton).
Enclose details of your name, address
and telephone number and when and
where the product was purchased,
together with proof of purchase (e.g. a
till receipt).
•
•
•
•
•
•
Failure to use or maintain product in
accordance with Dualit's instructions.
•
Give exact details of the nature of the
defect.
The product being connected to an
unsuitable electricity supply.
This Guarantee does not cover any other
claims whatsoever, including, without
limitation, any liability for incidental, indirect
or consequential damage, nor does it cover
any claims for conversion or modification or
for the costs of repair carried out by any
third party without the prior consent of
Dualit. If replacement parts are fitted to the
product this will not extend the period of
the Guarantee.
Accidental damage to or abuse or
misuse of the product.
The product has not been modified
except by Dualit or approved agent.
Dismantling of or interference with the
product.
Theft or attempted theft of the
product.
For further advice contact the Dualit
customer helpline on +44 (0)1293 652 500
(09:00 to 17:00 Monday to Friday).
Before returning any product under this
Guarantee, please check that:
•
You have followed the product
instructions correctly.
Alternatively, email Dualit at
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Dualit Limited County Oak Way Crawley West Sussex RH11 7ST
Telephone: +44 (0) 1293 652 500 Facsimile: +44 (0) 1293 652 555
@
GB1110
Download from Www.Somanuals.com. All Manuals Search And Download.
|