XDMA6540
INSTALLATION/OWNER'SꢀMANUAL
AM/FM/CDꢀReceiver
TM
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀINSTALLATION
WiringꢀDiagram
RCA Preamp Outputs
External Amplifer Connections
YELLOW - Rear RCA Input
SUB
Connect a portable device
REAR
BLUE - 10-pin Female Mini-DIN
HDM90 HD Radio™ Tuner Connection (sold separately)
FRONT
BLACK - Antenna Input
Connect the vehicle antenna
SiriusXM Vehicle Tuner Connection
(tuner sold separately)
Steering Wheel Interface Input
(PAC SWI-PS sold separately)
BLACK Bluetooth Microphone Input
Connect the included
Bluetooth microphone.
Bluetooth Microphone
(must be connected for Bluetooth functionality)
FUSE
When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse could
damage the radio.
The XDMA6540 uses one
10 amp ATM fuse located
beside the wiring connector.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
ControlꢀLocationsꢀ-ꢀReceiver
1
2
3
4
5
6
7
8
22 21 20
19
18
17
16
15 14
13 12
11 10
9
1
Release
Bluetooth Talk
12 Preset 4 / Play / Pause
13 Preset 3 / Intro
14 Preset 2 / Random
15 Preset 1 / Repeat
16 Display
2
3
4
5
6
7
8
9
Tune / Track Down
Mute / Power
Tune / Track Up
Mode Up
17 Mode Down
CD Eject
18 Volume knob / Select/ Tag
19 Menu
USB Port
Auxiliary Input
20 Band / Escape
21 Bluetooth End Call
22 Color
10 Preset 6 / Folder Up
Preset 5 / Folder Down
11
4
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
ControlꢀLocationsꢀ-ꢀRemote
1
2
3
21
4
20
19
18
5
6
7
17
16
15
14
13
8
9
10
11
12
1
2
3
4
5
6
7
8
9
Mute / Power
Volume Up
12 Bluetooth End Call
13 Key 0 / Display
Menu / Scan
Select / Tag
14 Bluetooth Talk
15 Key 7 / Key *
Tune / Track Up
Mode
16 Preset 4 / Play / Pause
17 Preset 5 / Folder Down
18 Preset 1 / Repeat
19 Band / Escape
Preset 2 / Random
Preset 3 / Intro
Preset 6 / Folder Up
20 Volume Down
10 Key 9 / Key #
Key 8
21 Tune / Track Down
11
5
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
GeneralꢀOperation
PowerꢀOn/Off Press or any other button to turn unit on. Press and
hold to turn unit off.
FaceplateꢀRemoval Press RELEASE and pull away from the left side to
remove. To re-install, insert right side of faceplate
first then push left side to secure.
Semi-permanentꢀ Remove trim ring and install supplied #1 x 7/32”
FaceplateꢀInstallation Phillips head screw through left side of mounting
frame into faceplate.
ChangingꢀModes Press MODEꢀDOWN to cycle down or press MODEꢀUP
to cycle up through the below operating modes. A
mode indicator located to the left of the LCD will point
to the current mode of operation.
AM/FM Tuner Mode
CD Player Mode
Auxiliary Input (front/rear) Modes
®
®
USB and Operation of iPod /iPhone Modes
SD Card Mode
Bluetooth Mode
SiriusXM Satellite Radio Mode
AvailableꢀModes SiriusXM mode will not appear unless the SiriusXM
Connect Vehicle Tuner (sold separately) is connected.
Operation of iPod mode will not appear unless an iPod
device (sold separately) has been connected.
CD, USB and SD modes will not appear unless a CD,
USB device or SD card (sold separately) have been
connected.
HD Radio™ mode will replace AM/FM tuner
mode when the Dual HDM90 HD Radio tuner (sold
separately) is connected.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
GeneralꢀOperation
Volume Adjust volume using volume knob (00-46).
Mute Press MUTE to silence the audio. “MUTE” will flash in
the display. Press MUTE again to cancel.
Display Press DISP to toggle between items such as ID3 tag
song information, file/folder information or the clock.
Selectꢀ/ꢀTag Push the volume knob inward to activate the SELECT
function. Push and hold the volume knob inward to
activate the TAG function.
SteeringꢀWheelꢀ The steering wheel interface input located on the back
InterfaceꢀInputꢀ of the head unit allows connection to the PACꢀ(Pacificꢀ
AccessoryꢀCorporation)ꢀSWI-PS interface module
To configure steering wheel controls, follow the
instructions provided with the PACꢀSWI-PS interface
module. After installing the interface module, insert
the module's 3.5mm jack into the port labeled
"REMOTE IN" on the back of the head unit.
AuxiliaryꢀInputs The XDMA6540 features two auxilary inputs. Insert
a 3.5mm connector in the front panel AUX port, or
connect RCA-type cables into the rear AUX port. Press
MODEꢀUP/DOWN to select Aux Front or Aux Rear
modes.
Reset Press the RESET button, located behind the front
panel, to reset the unit back to the factory settings if
abnormal operation occurs.
SettingꢀtheꢀClock With the unit on, press and hold DISP until the clock
begins to flash, then release. Press TUNE
nn
to adjust the hours and TUNEꢀ
to adjust the
ll
minutes. Press DISP momentarily to save the selected
time.
Note: The clock can also be set in the GENERAL
menu. See page 11 for details.
12/24-HourꢀClock The clock will display 12-hour AM/PM time in USA
:
frequency spacing mode (PM 10 00). In European
frequency spacing mode, the clock will display
24-hour time (22:00).
Note: 24-hour time and European frequency spacing
are not available if the HDM90 HD Radio™ tuner are
connected.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
SetupꢀMenu
Press MENU to access the setup menu, then turn the volume knob to cycle through menu categories:
Audio,ꢀColor,ꢀDisplay,ꢀTuner,ꢀiPod,ꢀBluetooth,ꢀSiriusXMꢀandꢀGeneral.
•
•
When desired category appears in the display, press SELECT, then rotate the volumeꢀknob left/
right to cycle through the options in each category.
When desired option appears in the display, press SELECT, then rotate the volumeꢀknob left/
right to adjust or activate desired function. Note: Some functions are toggled by pressing
SELECT and may not require turning the volume knob.
•
Press ESC to return to the previous menu, or exit the menu while the main menu is displayed.
AudioꢀMenu
Function
Bass
Options
Level
Action
Adjust the bass frequency ouput from -6 to +6.
Adjust the treble frequency output from -6 to +6.
Shift the speaker output from the left (-12) to the right (+12).
Shift the speaker output from the front (-12) to the rear (+12).
Treble
Level
Balance
Fader
Left - Right
Front - Rear
Select between Flat, Pop, Jazz, Classic, Beat, Rock, User.
• Any Bass or Treble adjustments are saved as the "User" EQ.
Equalizer
Subwoofer
Loudness
Preset EQs
Level
Adjust the level of the subwoofer output from 0 (off) to +12.
Set the loud setting to On or Off.
• Enhances the bass and treble frequencies at low volumes.
Off/On
Adjusts the output level for each mode individually from -6 to +6.
SourceꢀLevel
-6 to +6
ColorꢀMenu
MenuꢀFunction
Options
Sets the unit to rotate between all illumination colors automatically. Setting a preset or user
color will cancel the automatic color change.
AutoꢀChange
Adjust the color of the button and LCD illumination between 31 preset colors.
•ꢀ Off: sets the color to white. (default)ꢀꢀ
•ꢀ Day/Night: sets the color to change to different colors during the day or night. The day and
night colors must be set in the Day/Night color menu below.
SetꢀColor
•ꢀ User: sets the color to the custom color. The custom color must be set in the menu below.
•ꢀ 1-31: choose from any of the 31 preset colors.
Individually select the level of Red, Green and Blue from 1 - 32. Any combination of these
colors can be selected. ImportantꢀNote: Setting each Red, Green and Blue levels to 1 will turn
off set turn off the illumination for the LCD and buttons. If this color is set, press COLOR to
change to a color.
SetꢀCustomꢀ
Color
Sets inidvidual colors for the day or night. (The clock must be set for proper function).
SetꢀDay/Nightꢀ •ꢀ DayꢀColor: sets the daytime color to a preset or custom color.
Color
•ꢀ NightꢀColor: sets the nighttime color to a preset or custom color.
•ꢀ Time: adjusts the night time span. Turn the volume knob to adjust. (default is 7pm to 7am).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
SetupꢀMenu
DisplayꢀMenu
MenuꢀFunction
Scrolling
Options
Changes the scrolling style used for displayed information on the LCD between:
•ꢀ Off: information will not scroll.
•ꢀ Once: information will scroll one time per song.
•ꢀ 15ꢀseconds: information will scroll once per 15 seconds.
•ꢀ Page: information will cycle instead of scrolling. (default)
•ꢀ On: information will constantly scroll.
Adjusts the illumination level for the buttons and LCD between:
•ꢀ High: brightest illumination level. (default)
•ꢀ Medium: middle illumination level.
Dimmer
•ꢀ Low: dimmest illumination level.
•ꢀ NA: illumination level is locked and cannot be changed when day/night color is enabled.
Sets the LCD illumination type
•ꢀ Positive: Color background with black text.
•ꢀ Negative: Black background with color text.
LCDꢀType
•ꢀ Automatic: Switches to positive during the daytime, and negative during the night. (default)
TunerꢀMenu
MenuꢀFunction
Options
Press SELECT to begin storing strong radio stations to the 1 - 6 preset buttons in the current
band.
AutoꢀStationꢀStore
Allow only strong radio stations to be received, blocking stations with weak signal.
Local
Changes the tuner to receive USA (default) or European radio frequencies.
FrequencyꢀSp.
Switches the function of the seek/tune up and down buttons:
•ꢀ Seek: Quick press will seek to the next strong channel. Press and hold to activate manual
tuning.
•ꢀ Tune: Quick press will manually tune to the next station. Press and hold to seek to the
next strong channel. (default)
Tune/Seekꢀ
Priority
HDꢀRadio™ꢀTunerꢀMenu
When the optional HDM90 HD Radio tuner (sold separately) is connected, the following
additional menu options will appear in the Tuner menu.
MenuꢀFunction
HDꢀSeek
Options
Limits the seek and auto station store functions to only access HD Radio channels.
•ꢀ On: Seek and Auto Station Store will only access digital HD Radio channels.
•ꢀ Off: All analog and digital channels will be accessed. (default)
Press SELECT to erase all Tags that are saved in memory. (Does not affect Tags that have
been transferred to an iPod device.)
DeleteꢀAllꢀTags
TunerꢀMode
Enables/disables the digital HD Radio channel reception.
•ꢀ Analog: Limits the reception to standard analog channels only.
•ꢀ Digital: Allows both digital and analog channels to be received. (default)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
SetupꢀMenu
iPodꢀMenu
MenuꢀFunction
Options
Switches the control between the head unit and the iPod/iPhone device.
•ꢀ Full: Enables total control of the iPod device from the XDMA6540. (default)
•ꢀ Manual: Releases the control of the iPod device. Music searches and track selections
must be done from the device. The iPod device will continue to charge.
iPodꢀControl
Bluetooth™ꢀMenu
MenuꢀFunction
Options
Enables/disables Bluetooth functionality.
Bluetooth
Answers all incoming calls automatically without requiring a button press.
•ꢀ On: Automatically accepts all incoming calls after 2-3 rings without pressing the TALK
button.
•ꢀ Off: Incoming calls can be accepted by pressing the TALK button, or refused by pressing
the END button. (default)
AutoꢀAnswer
Connects the most recently paired Bluetooth device automatically.
•ꢀ On: Connects automatically when the XDMA6540 is powered on and the Bluetooth device
is in range. (default)
•ꢀ Off: Will not connect to any Bluetooth device unless you manually select the device from
the "paired devices" menu.
AutoꢀConnect
Directs the Bluetooth audio to only the front speakers (default) or to all four speakers.
SpeakerꢀOutput
SiriusXMꢀTunerꢀMenu
When the optional SiriusXM Satellite Radio tuner (sold separately) is connected, the
following additional menu options will appear in the Setup Menu.
MenuꢀFunction
Options
Press SELECT to enter the Parental Control menu. This menu is locked by a 4 digit code,
and a prompt will appear to enter the code. Unless changed using the Edit Code menu (see
below), the default code is "0000". Enter this code using one of these two methods:
• Enter "0000" using the remote control, by pressing the numbers directly. Press SELECT
to confirm.
• Turn the volumeꢀknob to select the first digit, then press SELECT. Continue with the
remaining digits until the code is entered.
Once the code is entered, choose from the below menu options:
ParentalꢀControl
(default code: 0000)
EditꢀCode: Choose this option to program a new 4-digit code. Enter the new code using the
input method described above.
ChannelꢀLock: Once selected, the channel list will appear. Turn the volumeꢀknob to cycle
through the list of channels. Press SELECT to lock the desired channel; a locked channel
will not be available in the channel lineup. A lock icon will appear next to the channel
name when the channel is locked. Pressing SELECT on a locked channel will unlock it.
ClearꢀAll: Choose this option to reset the locked channels back to the factory default. All
currently subscribed channels will be unlocked.
Press SELECT to erase all Tags that are saved in memory. (Does not affect Tags that have
been transferred to an iPod device.)
DeleteꢀAllꢀTags
10
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
SetupꢀMenu
GeneralꢀMenu
MenuꢀFunction
Clock
Options
Enables/disables the clock to be displayed on the LCD when the XDMA6540 is powered
off using the power button.
Enables/disables the 3.5mm auxiliary input on the front panel.
•ꢀ On: The auxiliary input is enabled. (default)
AuxꢀFront
AuxꢀRear
Beep
•ꢀ Off: Auxiliary input mode is removed from the list of available modes.
Enables/disables the RCA auxiliary input located behind the head unit.
•ꢀ On: The auxiliary input is enabled. (default)
•ꢀ Off: Auxiliary input mode is removed from the list of available modes.
When enabled, every button press will output a beep tone.
•ꢀ On: Every button press will output a single beep tone.
•ꢀ Off: Only press-and-hold button functions will output a double beep tone. (default)
Sets the XDMA6540 to power-on to the same volume level every time.
•ꢀ Off: The unit will turn on at the last volume level that was set. (default)
•ꢀ 1-30: Choosing a volume level will program the unit to always turn on at that volume.
Prog.ꢀVolume
Power-onꢀ
Message
Allows the "Good Morning/Afternoon/Evening" message that may be shown when the
unit is powered on.
Demoꢀmode
Enables/disables the demonstration mode for display purposes.
Adjusts the time for the internal clock.
SetꢀClock
• Press
• Press
to adjust the hours.
to adjust the minutes.
nn
ll
AM/FMꢀTunerꢀOperation
Display Press DISP to toggle the display between the frequency and clock.
Note: when using the HDM90 HD Radio™ tuner, refer to page 12.
SeekꢀTuning Press TUNE
or TUNEꢀ
for more than one second to seek
nn
ll
the next strong station.
ManualꢀTuning Press TUNE
or TUNEꢀ
momentarily to move radio
nn
ll
frequency up or down one step at a time. Press and hold to advance
quickly.
Note: Tuning options can be changed in the tuner setup menu.
ScanꢀTuning Press SCAN on the remote control momentarily to preview strong
stations on the current band, pausing for five seconds at each.
Press SCAN on the remote control again to cancel.
Bandꢀ Press BAND to select between FM1, FM2, FM3, AM1 and AM2
bands. Up to six presets can be programmed for each band.
StoringꢀandꢀRecallingꢀStationꢀ Up to 18 FM stations and 12 AM stations can be stored in memory.
Presets To store a station, select the desired band and station. Press and
hold the desired preset button (1-6) for more than two seconds.
When stored, the preset number will appear in the display. The
station can be recalled by pressing the corresponding preset
button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
HDꢀRadio™ꢀAM/FMꢀTunerꢀOperation
ConnectingꢀtheꢀHDM90ꢀ HD Radio operation requires connecting the HDM90
(soldꢀseparately) HD Radio tuner (sold separately). Refer to the HDM90
instructions for connection details.
Display When the unit is tuned to an HD Radio station, press DISP
to toggle the display between artist/title and program type/
station name.
HDꢀRadioꢀTuning Seek, manual and scan tuning functions are performed as
described for AM/FM tuning on page 11.
When HD Radio station is selected, an HD Radio logo will
begin to flash on the display. After about five seconds, HD or
HD1 will illuminate after the radio frequency.
• If "HD" appears, the radio station is broadcasting a higher
quality sound. No additional stations are available.
• If "HD1" appears, additional multicast channels (HD2
and/or HD3) are available. Press TUNEꢀ
other available multicast channels.
to tune to
ll
HDꢀSeekꢀMode To activate HD Seek, refer to the HD Radio setup menu on
page 9. Once enabled, the HD SEEK icon will appear on the
display, indicating that the unit will skip over analog stations
and tune to HD Radio stations only.
Select "HD Seek Off" from the HD Radio menu to cancel.
AutoꢀStationꢀStore While in HD SEEK mode, the AUTO STORE menu option will
automatically store only HD Radio stations, beginning from
the lowest frequency.
Note:ꢀMulticast channels (HD2 and/or HD3) are not
automatically stored with this feature but can be stored by
holding the desired preset number (1-6) for 3 seconds.
SettingꢀHDꢀRadioꢀPresets HD Radio multicast stations (HD2 and HD3) can be stored as
presets in the same way as analog radio stations. Press and
hold a preset button until it beeps to store the preset.
RecallingꢀanꢀHDꢀRadioꢀ When selecting a preset multicast station, "LINKING" will
MulticastꢀPreset appear in the display for approximately 5 seconds while the
multicast station information is received.
Note: If the HD Radio signal on the preset is unavailable, the
unit reverts to the previous analog or digital station.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
SiriusXMꢀVehicleꢀTunerꢀConnections
Connectingꢀtheꢀ SiriusXM Satellite Radio operation requires the connection of the
SiriusXMꢀVehicleꢀTunerꢀ SiriusXM-Connect Vehicle Tuner (sold separately).
(soldꢀseparately)
Note: The SiriusXM-Connect Vehicle Tuner must have the SiriusXM
logo to be compatible with the XDMA6540.
To connect the SiriusXM Vehicle Tuner, follow the instructions
provided with the tuner. When connecting the tuner to the
XDMA6540, the cable orientation should be connected as shown
below.
XDMA6540
Head Unit
SiriusXM-Ready
SiriusXM Vehicle
Input
Tuner Cable
Line up the connector with the pins on the cable. It can only be inserted as shown above. Push the
cable into the head unit's connetor until it clicks. Attempting to insert the cable differently from shown
above may cause damage to the cable or head unit.
SiriusXMꢀVehicleꢀTunerꢀOperation
SiriusXMꢀSatelliteꢀRadioꢀOverview
Everything worth listening to is on SiriusXM, getting over 130 channels,
including the most commercial-free music, plus the best sports, news,
talk and entertainment. A SiriusXM Vehicle Tuner (sold separately) and
Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio
Inc. and its subsidiaries. All other marks and logos are the property of their
respective owners. All rights reserved.
ListeningꢀtoꢀSiriusXMꢀSatelliteꢀ After installation of the SiriusXM Vehicle Tuner, press SOURCE until SiriusXM
Radio
mode appears to begin listening to SiriusXM Satellite Radio.
TunerꢀActivation
To listen to SiriusXM Satellite Radio, a subscription is required. Activate the
SiriusXM Vehicle Tuner using one of the two methods below:
•ꢀ Phone: Call 1-800-XM-RADIO (1-800-967-2346).
Activation typically takes 10-15 minutes, but may take up to an hour. It is
recommended to leave your vehicle on until the "Subscription Updated"
message appears.
RadioꢀID
To view the Radio ID on the LCD, press TUNE
or TUNEꢀ
until
nn
ll
channel 0 appears. The 8 character Radio ID will appear on the display. The
Radio ID is also printed on the underside of the SiriusXM Vehicle Tuner. Note:
The Radio ID does not use the letters I, O, S, F.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
SiriusXMꢀVehicleꢀTunerꢀOperationꢀ
ChangingꢀChannels
Press TUNE
or TUNEꢀ
to select the next channel up or
nn
ll
down.
Hold down TUNE
or TUNEꢀ
to quickly change channels.
nn
ll
Release the button to stop on the desired channel.
Band
Press BAND to select between the SXM1, SXM2 and SXM3 bands.
Up to six presets can be programmed for each band.
Presets
Up to 18 SiriusXM Satellite Radio channels can be stored in
memory. To store a channel, select the desired band and channel.
Press and hold the desired preset button (1-6) on the front panel or
remote control for more than two seconds. When stored, the preset
number will appear in the display. The channel can be recalled by
pressing the corresponding preset button.
Note: Buttons 7,8,9,0 on the remote control are not associated with
channel presets.
ParentalꢀControl
See the SiriusXM setup menu on page 10 for parental control
instructions.
ChannelꢀSearch
BeginꢀYourꢀSearch
ChannelꢀList
Press SELECT to start searching for a specific channel. Choose
between ChannelꢀList, CategoryꢀSearch or DirectꢀChannelꢀInput.
Displays a list of all available channels.
• Highlight "Channel List" and press SELECT.
• Turn the volumeꢀknob to cycle through the list of channels.
• Press DISP to change between the channel name and the
currently playing artist or song title.
• Press SELECT to begin listening to the highlighted channel.
CategoryꢀSearch
Searches for channels in a certain category.
• Highlight "Category Search" and press SELECT.
• Turn the volumeꢀknob to cycle through the list of categories.
• Press SELECT to choose a category and display the channels in
that category.
• Press DISP to change between the channel name and the
currently playing artist or song title.
• Press SELECT to begin listening to the highlighted channel.
DirectꢀChannelꢀInput
Input a channel number to directly tune to that channel.
• Highlight "Direct Channel Input" and press SELECT.
• Use one of the two methods below to enter the channel number:
1)Enter the 1, 2 or 3-digit channel number using the remoteꢀ
control 0-9 keys and press SELECT. Press ESC to delete a
digit.
2)Use the unit volumeꢀknob to select 0-9 for the number digits.
If applicable, use TUNEꢀ
to advance to the next digit and
ll
press SELECT to tune to the entered channel. Press ESC or
TUNE to delete a digit.
nn
Example: To tune to channel 12, select "1" using the volumeꢀ
knob, press TUNEꢀ to advance, then select "2" with the
ll
volumeꢀknob and press SELECT.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
SiriusXMꢀVehicleꢀTunerꢀOperationꢀ
DisplayedꢀInformation
Display Press DISP to cycle between: Channel Name/Artist Name/Song
Title Category Name/Artist Name/Song Title Artist Name/Song
Title/Content Info Clock.
ChannelꢀNameꢀIconꢀ
ArtistꢀNameꢀIconꢀ
SongꢀTitleꢀIconꢀ
Displays the name of the SiriusXM channel.
Displays the artist's name from the currently playing song.
Displays the song title from the currently playing song.
Displays the category type of the current channel.
CategoryꢀIconꢀ
ContentꢀInfoꢀIconꢀ
Displays special channel information from the current channel.
ChannelꢀNumber
TAGꢀIcon
ModeꢀIndicator
SiriusXMꢀModeꢀIcon
PresetꢀNumber
ChannelꢀName
CurrentꢀArtistꢀName
CurrentꢀSongꢀTitle
SignalꢀStrength
PresetꢀBand
DefaultꢀdisplayꢀlayoutꢀforꢀSiriusXMꢀmode
SiriusXMꢀAdvisoryꢀMessages
Message
Description
•
Check the SiriusXM tuner connection behind the XDMA6540 to ensure that
its correctly connected.
CheckꢀTuner
•
•
•
Ensure the SiriusXM antenna cable is connected to the SiriusXM tuner
correctly.
Check the SiriusXM antenna wire for breaks or sharp bends. Replace the
antenna if necessary.
CheckꢀAntenna
NoꢀSignal
Press RESET located behind the front panel. If the message remains, the
antenna may have been damaged.
•
•
The vehicle must be outside, and the antenna must have a clear view of
the southern sky.
The magnetic antenna must be mounted on the outside of the vehicle
for the best reception.
•
•
This channel is not included in your SiriusXM subscription plan. Call
1-800-XM-RADIO (1-800-967-2346) to subscribe.
ChannelꢀNotꢀSubscribed
ChannelꢀNotꢀAvailable
This channel is not a valid SiriusXM channel. The channel number has
been entered incorrectly, or the channel was removed from the SiriusXM
channel lineup. The XDMA6540 will resume SiriusXM channel 1.
•
•
The selected channel has been locked by the parental control option.
A prompt to enter the unlock code will appear. Enter the unlock code as
described on page 10.
ChannelꢀLocked
•
An update to your SiriusXM subscription has been received by the
SiriusXM tuner. Press any key to continue.
SubscriptionꢀUpdated
15
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
iTunes®ꢀTaggingꢀOperation
Requirements
The iTunes Tagging feature of the XDMA6540 requires the optional
HDM90 HD Radio™ tuner (sold separately) or SiriusXM Vehicle
Tuner (sold separately).
Overview
iTunes Tagging allows the user to "Tag" songs that are playing on an
HD Radio station or SiriusXM Satellite Radio channel and enables
them to be purchased later through iTunes. With the touch of a
button the unit will remember the title and artist song information,
and then transfer that information to your iPod device the next time
you connect it to the XDMA6540. A new list called "Tagged" will
appear in iTunes, giving you the option to purchase each song.
TaggingꢀMusic
Stepꢀ1
TuneꢀtoꢀanꢀHDꢀRadioꢀstationꢀorꢀSiriusXMꢀchannel. The TAG icon
must appear, indicating that a valid artist name and song title are
available.
Stepꢀ2
PressꢀandꢀholdꢀtheꢀSELECT/TAG button. A confirmation will be
displayed, indicating that the song information has been saved. The
song information will be saved in memory until an iPod device is
plugged in. Up to 64 HD Radio Tags and 64 SiriusXM Tags can be
saved before they must be transferred or deleted.
Stepꢀ3
PlugꢀinꢀanꢀiPodꢀdevice. All the Tags currently in memory will be
automatically transferred, deleting the Tags from the head unit's
memory. See page 25 for connection details.
Note: The XDMA6540 must remain in HD Radio tuner, SiriusXM or
operation of iPod modes until the Tags are successfully transferred.
Tags cannot be transferred from SD Card, USB, Bluetooth or
Auxiliary input modes.
If an iPod device is plugged in when a song is tagged, press MODEꢀ
UP/DOWN until the XDMA6540 is in operation of iPod mode. Tags
will transfer automatically. (see page 17 for compatibility with iPod
devices).
Stepꢀ4
SyncꢀwithꢀiTunes. A list named "Tagged" will appear on the left in
the iTunes software. Click on the "Tagged" list to view all the songs
that have been tagged and click the "view" button for purchase
information.
DeletingꢀAllꢀTags
Press MENU to enter the setup menu. Select the HD Radio or
SiriusXM menu, and select the "Delete Tags" option. HD Radio Tags
and SiriusXM Tags are saved separately, and must be deleted
separately. See pages 9-10 for details.
Note: Once transferred, Tags are managed from the iTunes
software.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
iTunes®ꢀTaggingꢀOperation
Troubleshooting
Displayed Message
Description
There is a compatibility issue with the iPod device that is connected. Check
the list of compatible iPod devices below.
CheckꢀiPodꢀVersion
If the attached iPod device is compatible, update the firmware to the latest
version using iTunes.
Tags are being sent to the iPod device. This process can take several
minutes depending on the number of Tags being sent.
SendingꢀTags
iPodꢀDeviceꢀisꢀFull
TagꢀTransferꢀFailed
There is not enough space on the connected iPod device to transfer the
iTunes Tags. Free up space using iTunes.
Connection error. Ensure the iPod device is powered on and reconnect the
iPod device until a confirmation is displayed.
The same song has already been tagged from the same radio station, and
is currently saved in memory. The same song cannot be tagged twice -
unless the song is tagged on a different radio station, the Tags are sent to
an iPod device or the tags are erased.
SongꢀAlreadyꢀTagged
The internal memory will hold 64 HD Radio™ Tags and 64 SiriusXM Tags.
An iPod device must be connected to transfer the Tags, or the Tags must be
deleted before more songs can be tagged.
InternalꢀMemoryꢀFullꢀ
-ꢀConnectꢀiPod
There is not sufficient information (artist or title) to tag the song. Some HD
NoꢀTagꢀInformation Radio stations or SiriusXM channels or certain songs may not fully support
iTunes Tagging.
TaggingꢀFailedꢀ
TryꢀAgain
There was an error saving the Tag information to the internal memory.
Press and hold theꢀSELECT/TAG button again.
There are no tags saved in the internal memory. The Delete Tags function
can only delete Tags that are saved in the internal memory.
NoꢀTagsꢀStored
DeviceꢀCompatibilityꢀ Compatible with
withꢀiTunesꢀTagging • *iPod touch (4th generation)
• iPod nano (6th generation)
• *iPod touch (3rd generation)
• iPod nano (5th generation)
• *iPod touch (2nd generation)
• iPod nano (4th generation)
• iPod classic
• *iPod touch (1st generation)
• iPod nano (3rd generation)
• *iPhone 4
• *iPhone 3GS
• *iPhone 3G
• *iPhone
*Some iPod devices may require you to select 'transfer purchases' in the context menu from the name
of your iPod device to transfer Tags to iTunes.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
CDꢀPlayerꢀOperation
InsertꢀCD With the label facing up, insert a standard size CD into the
CD slot. The CD will automatically begin playback.
EjectꢀCD Press EJECT to eject the CD. The unit will change to
previous mode of operation. If the disc is not removed
within 10 seconds, the unit will reload the disc. The unit
does not have to be turned on to eject CD.
TrackꢀSelect Press TRACKꢀ
Press TRACK
to skip to the beginning of the next track.
to return to the beginning of the current
ll
nn
track. Pressing TRACK
again skips to the beginning of
nn
the previous track.
FastꢀForward/Reverse Press and hold TRACKꢀ
or TRACK
to fast forward
ll
nn
or reverse a track.
Pause Press
/
/
II to temporarily stop CD playback.
II again to resume playback.
l
l
Press
Intro Press INTꢀto enter the Intro menu, then turn the volume
knob to select one of the following options:
• OFF - Cancels the INTꢀfunction.
• ALL SONGS - Plays the first 10 seconds of each track.
Repeat Press RPTꢀto enter the Repeat menu, then turn the volume
knob to select one of the following options:
• ALL SONGS - Plays all tracks on CD.
• CURRENT SONG - Continuously repeats selected track.
Random Press RDMꢀto enter the Random menu, then turn the
volume knob to select one of the following options:
• OFF - Cancels the RDMꢀfunction.
• ALL SONGS - Plays all tracks in random order.
CD-R/CD-RWꢀ Some CD-Rs and CD-RWs may be incompatible with this
Compatibility unit, depending on media type and recording method. In
addition, the following CDs may be incompatible with this
unit:
CDs exposed to extreme temperatures or direct sunlight
for extended periods of time, CDs recorded in which a
recording session failed or a re-recording was attempted
and, or encrypted or copy-protected CDs which do not
conform to the audio CD-DA red book recording standard.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMA
PlayingꢀanꢀMP3/WMAꢀ When an MP3/WMA encoded disc is first inserted,
Disc “READING” will appear in the display. Depending on the
number of files and folders, this may take several seconds.
FolderꢀAccessꢀ Press
to select the next folder.
to select the previous folder.
Press
*Folder access is only available on discs recorded with
more than one folder.
Repeat Press RPTꢀto enter the Repeat menu, then turn the volumeꢀ
knob to select one of the following options:
• All Songs - Plays all tracks on CD.
• Current Song - Continuously repeats selected track.
• Current Folder - Continuously repeats all files in the
folder.
Random Press RDMꢀto enter the Random menu, then turn the
volumeꢀknob to select one of the following options:
• Off - Cancels the RDMꢀfunction.
• All Songs - Plays all tracks in random order.
• Current Folder - Plays all tracks in the folder in random
order.
Note: Random mode is retained in memory when selecting
between other modes and when the unit is turned on/off.
Intro Press INTꢀto enter the Intro menu, then turn the volumeꢀ
knob to select one of the following options:
• Off - Cancels the INTꢀfunction.
• All Songs - Plays first 10 seconds of each track.
• Current Folder - Plays first 10 seconds of each track in
folder.
Note: Folder repeat, random and intro options only function
on MP3/WMA discs recorded with more than one folder.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMA
DisplayedꢀInformation
Press DISPto select between displayed information such as ID3 tag information and file/
folder names.
DisplayꢀlayoutꢀforꢀMP3/WMAꢀCD's
Mode
Track Number
Clock
Track 15/100
Song Title
Song Title
Artist Name
Album Name
File Type
W
Artist Name
aAlbum Name
Track Progress
Elapsed Time
File/FolderꢀSearch
BeginꢀSearching Press SELECT to enter the file/folder search mode. A list of all the
folders from the CD will be displayed.
Note: Any files located in the root directory will be located in the
folder named "ROOT".
Chooseꢀaꢀsong Turn the volumeꢀknob to cycle through all the folders on the disc
and press SELECT to choose the desired folder. The list of files in
the selected folder will be displayed. Turn the volumeꢀknob to cycle
through the list of files.
MenuꢀNavigation Pressing ESC when viewing the contents of a folder will return to
the list of folders. Press ESC again to exit the search menu.
Playingꢀaꢀsong Once the desired song is displayed, press SELECT to begin playback
of the desired song.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMA
File/FolderꢀSearchꢀ(continued)
Press SELECT
to begin
Press
SELECT
Folder 1 Folder 2 Folder 3 Folder 4 Folder 5 Folder 6 Folder 7
Press
BACK
Files
Files
Files
Files
Files
Files
Files
SELECT
Turn the
volume knob
File/FolderꢀCompatibilityꢀandꢀSupport
• CD-ROM (ISO), CD-R, CD-RW
• CD-DA (digital audio)
• MP3 data (.mp3)
CompatibleꢀFileꢀTypes
IncompatibleꢀFileꢀTypes
• WMA data (.wma)
• DRM protected files
• WMA lossless
• Apple lossless
• WMA Pro
• MP3 Pro
• MP3 playlists
• WAV lossless
• M4A/AAC files
• ISO9660 level 1 & level 2
• Yellow book MODE 1 & MODE 2 FORM 1
• Multi session
RecordingꢀFormatꢀ
Compatibility
SamplingꢀFrequencyꢀ • MP3: 8kHz - 48kHz
RateꢀCompatibility
• WMA: 32kHz - 48kHz
TransferꢀBitꢀRateꢀ
Compatibility
• MP3: 32kbps - 320kbps
• WMA: 32kbps - 192kbps
• Song Title: 32 characters
• Artist Name: 32 characters
• Album Name: 32 characters
• File Name: 32 characters
• Folder Name: 32 characters
CharacterꢀSupport
• MP3 Tags: Version 1.0 - 2.4
• WMA Tags
ID3ꢀTagꢀSupport
File/FolderꢀLimit
• Maximum files: 999
• Maximum folders: 255
• Maximum folder levels: 8
21
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
USB/SDꢀCardꢀOperation
ConnectꢀaꢀUSBꢀDevice To play MP3/WMA files from most mass storage devices,
(soldꢀseparately) connect a device to the XDMA6540's USB port.
ConnectꢀanꢀSDꢀCard To play MP3/WMA files from an SD Card, insert an SD card
(soldꢀseparately) into the XDMA6540's SD card slot, located behind the front
panel. Insert the SD card with the label facing up, and press
the card until it clicks into place. Remove the SD card by
pressing in until it clicks, then pull to remove.
PlayingꢀMusic When a USB or SD card device is first connected, playback
will begin momentarily. Depending on the number of files
and folders, it may take several seconds for the device to
begin playing. If no valid MP3/WMAfiles are detected, “NO
FILE” will be displayed and the last mode will be resumed.
TrackꢀSelect Press
to skip to the beginning of the next song. Press
ll
to return to the beginning of the current song. Pressing
again skips to the beginning of the previous song.
nn
nn
FastꢀForwardꢀandꢀReverse Press and hold TRACKꢀ
or TRACK
to fast forward
ll
nn
or reverse a track.
Pause Press / II again to resume playback.
Press / II to temporarily stop USB playback.
l
l
FolderꢀAccessꢀ Press
Press
to select the previous folder.
to select the next folder.
Note: Folder access is only available on USB/SD Card
devices with more than one folder.
Repeat Press RPTꢀto enter the Repeat menu, then turn the volumeꢀ
knob to select one of the following options:
• All Songs - Plays all tracks on the USB/SD Card device.
• Current Song - Continuously repeats selected track.
• Current Folder - Continuously repeats all files in
selected folder.
Random Press RDMꢀto enter the Random menu, then turn the volumeꢀ
ꢀ
knob to select one of the following options:
• Off - Cancels the RDMꢀfunction.
• All Songs - Plays all tracks in random order.
• Current Folder - Plays all tracks in folder in random
order.
Note: Random mode is retained in memory when selecting
between other modes and when the unit is turned on/off.
Intro Press INTꢀto enter the Intro menu, then turn the volumeꢀ
knob to select one of the following options:
• Off - Cancels the INTꢀfunction.
• All Songs - Plays first 10 seconds of each track.
• Current Folder - Plays first 10 seconds of each track
in folder.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
USBꢀ/ꢀSDꢀCardꢀOperation
FileꢀandꢀFolderꢀSearch
USB and SD card modes features a file and folder search mode. This search allows
navigating through folders to find a specific file for playback.
BeginꢀSearching Press SELECT to enter the file/folder search mode. A list of all the
folders from the USB device will be displayed.
Note: Any files located in the root directory will be located in the
folder named "ROOT".
Chooseꢀaꢀsong Turn the volumeꢀknob to cycle through all the folders on the device
and press SELECT to choose the desired folder. The list of files in
the selected folder will be displayed. Turn the volumeꢀknob to cycle
through the list of files.
MenuꢀNavigation Pressing ESC when viewing the contents of a folder will return to
the list of folders on the USB device. Press ESC again to exit the
search menu.
Playingꢀaꢀsong Once the desired song is displayed, press SELECT to begin playback
of the desired song.
Searchꢀmenuꢀnavigation
Press SELECT
to begin
Press
SELECT
Folder 1 Folder 2 Folder 3 Folder 4 Folder 5 Folder 6 Folder 7
Press
BACK
Files
Files
Files
Files
Files
Files
Files
SELECT
Turn the
volume knob
Controls for File/Folder search:
•ꢀ Volumeꢀknob: Turn to cycle through the list of folders, or list of files in the current folder.
•ꢀ SELECT: View the contents of the highlighted folder, or to play the highlighted file.
•ꢀ ESC:ꢀReturn to the previous folder, or to exit out of the menu while the root folder is being viewed.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
USBꢀ/ꢀSDꢀCardꢀOperation
DisplayedꢀInformation
Press DISP to select between displayed information such as ID3 tag information and file/
folder names.
Mode
Track Number
Clock
Song Title
Track 15/100
Song Title
Artist Name
Album Name
W
Artist Name
aAlbum Name
Track Progress
Elapsed Time
File/FolderꢀCompatibilityꢀandꢀSupport
• MP3 data (.mp3)
CompatibleꢀFileꢀTypes
• WMA data (.wma)
• DRM protected files
• WMA lossless
• Apple lossless
• WMA Pro
IncompatibleꢀFileꢀTypes
• MP3 Pro
• MP3 playlists
• M4A/AAC data
• WAV lossless
SamplingꢀFrequencyꢀRateꢀ • MP3: 8kHz - 48kHz
Compatibility
• WMA: 32kHz - 48kHz
TransferꢀBitꢀRateꢀ
Compatibility
• MP3: 32kbps - 320kbps
• WMA: 32kbps - 192kbps
• Song Title: 32 characters
• Artist Name: 32 characters
• Album Name: 32 characters
• File Name: 32 characters
• Folder Name: 32 characters
CharacterꢀSupport
ID3ꢀTagꢀSupport
File/FolderꢀLimit
• MP3 Tags: Version 1.0 - 2.4
• WMA Tags
• Maximum number of files: 50000
• Maximum number of folders: 255 (plus the root folder)
• Maximum number of files in each folder: 50000
Note: For devices with more than the maximum number of files/folders, some files
will be ingnored and may not function properly.
• FAT/FAT32 file system supported.
• HFS/NTFS/EXT2/EXT3 not supported.
USB/SDꢀFileꢀSystem
SDꢀCardꢀCapacity
16GB or less supported.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
ConnectingꢀanꢀiPod/iPhoneꢀDevice
ConnectingꢀanꢀiPod
ꢀorꢀiPhoneꢀDeviceꢀ
(soldꢀseparately)
To play music from an iPod/iPhone device using the direct
USB interface, connect the USB cable (included with your
iPod/iPhone device) to the XDMA6540's USB port. Once
connected, playback will begin automatically.
Note: If a song is playing on the iPod or iPhone device before
it is connected, it will continue to play after being connected.
ControllingꢀaꢀDevice:ꢀFullꢀControl
WhenꢀtheꢀcontrolꢀofꢀiPod/iPhoneꢀfeatureꢀisꢀsetꢀtoꢀ"FULL"ꢀinꢀtheꢀsetupꢀmenu,ꢀuseꢀtheꢀ
followingꢀfunctionsꢀtoꢀcontrolꢀtheꢀdevice:
ꢀꢀꢀꢀSongꢀSelect Press
to skip to the beginning of the next song. Press
ll
to return to the beginning of the current song. Pressing
again skips to the beginning of the previous song.
nn
nn
ꢀꢀFastꢀForwardꢀandꢀ Press and hold
or
ll nn
to fast forward or reverse a
Reverse song.
ꢀꢀ
Pause Press
/
/
II to temporarily stop playback.
II again to resume playback.
l
l
Press
Repeat Press RPTꢀto enter the Repeat menu, then turn the volume
knob to select one of the following options:
• Off - Repeats all tracks.
• Current Song - Repeats selected track.
Random Press RDMꢀto enter the Random menu, then turn the volume
knob to select one of the following options:
• Off - Cancels the RDMꢀfunction.
• All Songs - Plays all tracks in random order.
• Current Album - Plays all tracks in the selected album in
random order.
Intro Press INTꢀto enter the Intro menu, then turn the volume
knob to select one of the following options:
• Off - Cancels the INTꢀfunction.
• On - Plays first 10 seconds of each track.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
OperationꢀofꢀiPod/iPhone
ControllingꢀaꢀDevice:ꢀFullꢀControlꢀ-ꢀMusicꢀSearch
TheꢀXDMA6540ꢀfeaturesꢀaꢀpowerfulꢀmusicꢀsearchꢀthatꢀsimplifiesꢀtheꢀsearchingꢀprocess.ꢀ
Followꢀtheꢀstepsꢀbelowꢀtoꢀfindꢀtheꢀdesiredꢀsong:
BeginꢀSearching Press SELECT to begin the search. The main search menu will
appear.
SelectꢀaꢀCategory Turn the volumeꢀknob to select between artist, album, songs,ꢀ
playlist,ꢀpodcastꢀandꢀaudiobook. Press SELECT to select the desired
search category. Some categories have subcategories to navigate
through. See the table below for details.
Menu Navigation
Songs
Search Category
Artist
Album
Menu
Menu
Menu
Menu
Menu
Menu
Artists
Albums
Songs
Albums
Songs
Songs
Playlist
Audiobook
Podcast
Playlists
Audiobooks
Podcasts
Songs
StepꢀBackwards Press ESC to return to the previous menu, or exit the search menu
when the main menu is shown.
PlayingꢀaꢀSong Navigate to the desired song/podcast/audiobook and press SELECT
to begin playback.
Note: If a specific category is selected, the iPod/iPhone device
playback will be limited to that category until another category is
selected in the search menu.
DeviceꢀCompatibility
• iPod touch (4th generation)
• iPod nano (6th generation)
• iPod touch (3rd generation)
• iPod nano (5th generation)
• iPod touch (2nd generation)
• iPod nano (4th generation)
• iPod classic
Madeꢀfor
• iPod touch (1st generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• *iPod nano (1st generation)
• *iPod with video
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
*These devices are not compatible with manual control mode.
Note: See page 17 for iPod and iPhone device compatibility with iTunes
Tagging.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
OperationꢀofꢀiPod/iPhone
ControllingꢀaꢀDevice:ꢀManualꢀControl
WhenꢀtheꢀcontrolꢀofꢀiPod/iPhoneꢀfeatureꢀisꢀsetꢀtoꢀ"MANUAL"ꢀinꢀtheꢀiPodꢀMenu,ꢀuseꢀtheꢀ
followingꢀfunctionsꢀtoꢀcontrolꢀtheꢀdevice:
When "MANUAL" control is selected from the iPod Menu, the iPod or
iPhone device can be controlled directly from the device's interface.
All functions except for volume can be used from the iPod or iPhone
device.
ManualꢀControlꢀforꢀiPod
In addition to manual control of the iPod/iPhone device, the
following basic functions are still active:
BasicꢀHeadꢀUnitꢀControl
ꢀSongꢀSelect
Press
to skip to the beginning of the next song. Press
to
ll
nn
return to the beginning of the current song. Pressing
skips to the beginning of the previous song.
again
nn
Press
Press
/
/
II to temporarily stop playback.
II again to resume playback.
ꢀPause
Volume
l
l
When playing an iPod device, the volume is adjustable using the
volumeꢀknob on the front.
The firmware of the iPod must be updated to the latest version to be
compatible with manual control mode.
Compatibility
DisplayingꢀInformation
Press the DISPꢀbutton to change between different types of information such as ID3 song information
and the clock. Below is the default display for iPod mode.
Track Number
Clock
Mode
Song Title
Track 15/10
Song Title
W
Artist Name
Artist Name
Album Name
aAlbum Name
Track Progress
Elapsed Time
CharacterꢀSupport
Only alphanumeric characters can be displayed (ASCII type).
• "NO SUPPORT" will be displayed if the file contains characters that can not be displayed.
• "NO FILE" will be displayed if there are no songs in the selected playlist.
Maximum character display information
• *Song title – 32 character maximum
• *Artist name – 32 character maximum
• *Album name – 32 character maximum
*Song Title, Artist Name and Album name will only be displayed if included with the file.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
Bluetooth®ꢀOperation
PairingꢀaꢀDevice
Preparation Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your
device before you begin the pairing process.
PairingꢀaꢀNewꢀDevice The XDMA6540 broadcasts the pairing signal constantly
when no devices are currently connected. Complete the
pairing sequence from your Bluetooth device. Refer to the
owner's manual for your device for more details.
Theꢀdeviceꢀnameꢀisꢀ"DUALꢀBT"ꢀꢀ
TheꢀBluetoothꢀpasscodeꢀ"1234"ꢀ
Note: The XDMA6540 can be in any mode of operation when
pairing is performed.
PairingꢀAdditionalꢀDevices If a device is currently connected, press and hold
to
disconnect the current device before a new device can be
paired. Then begin the pairing sequence from the new
Bluetooth device.
(Re)ConnectingꢀaꢀPairedꢀDevice
Most Bluetooth devices support the auto-connect feature, and will connect automatically
if the device is in range when the XDMA6540 is powered-on. If your device was previously
paired but does not connect, use these instructions below. Some devices require
authorization to allow the auto connect feature.
• If your most recently connected Bluetooth device becomes disconnected or does not
reconnect, press
from Bluetooth mode to reconnect your mobile device.
• To connect a previously paired device that was not recently connected:
1) If applicable, press and hold
to disconnect any connected mobile devices.
2) From Bluetooth mode, press SELECT. "Paired Devices" will appear on the LCD.
3) Turn the volume knob to cycle through the list of devices.
4) Press SELECT or
to connect to the desired device. It must be in range to connect.
Note: If the AutoꢀConnect setup menu setting is set to OFF, you must press
you device after pairing, and each time the XDMA6540 is powered-on.
to connect
DisconnectingꢀaꢀDevice
Press and hold
for 3 seconds to disconnect a connected device. The device will remain
paired and appear in the PAIRED DEVICES menu, but not be connected.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
Bluetooth®ꢀOperation
MakingꢀaꢀPhoneꢀCall
ManualꢀDialing • Press
once. "Enter Phone Number" will be shown, then
an "_" will appear on the display.
• Using the remote control, enter the phone number using
the 0-9 buttons. Press on the remote control or
XDMA6540 front panel to begin dialing.
Note: Placing a phone call from your cell phone will also use
the Bluetooth function of the XDMA6540.
RecentꢀCallsꢀList • Press
twice from Bluetooth mode to view the 10 most
recent phone calls that were dialed, received or missed
while connected to the XDMA6540.
• Turn the volume knob to cycle through the recent phone
numbers. Press SELECT or
to dial the phone number.
Redialingꢀtheꢀlastꢀnumber To redial the last phone number, press
three times from
Bluetooth mode. Dialing will begin automatically.
ReceivingꢀandꢀEndingꢀPhoneꢀCalls
ReceivingꢀaꢀPhoneꢀCall Incoming phone calls will automatically appear on the
display and a ring tone will be heard.
Note: The volume of the ring tone depends on the volume
level of the XDMA6540. The incoming ring tone may not be
heard if the volume is set to a low level or mute is activated.
• Press
• Press
to receive the incoming phone call.
to refuse the incoming phone call.
Note: If AutoꢀAnswer is set to ON in the setup menu, all
phone calls will be received automatically.
EndingꢀaꢀPhoneꢀCall During an active phone call, press
to end a phone call.
If the phone call was received when listening to music in
another mode, the XDMA6540 will resume the previous
mode.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
Bluetooth®ꢀOperation
DuringꢀaꢀPhoneꢀCall
Volume Turn the volumeꢀknob to adjust the volume level during a
phone call. Bluetooth mode has a separate volume level
from the main volume of other modes. The XDMA6540 will
remember the volume level in Bluetooth mode and always
return to the last volume level for each phone call.
MicrophoneꢀMute Press MUTE during a phone call to turn the XDMA6540's
external microphone off. Press MUTE again to resume
microphone operation.
AudioꢀTransfer Press DISP during a phone call to transfer the call from the
XDMA6540 to the cell phone. Press DISP again to toggle the
audio back to the XDMA6540.
CallꢀWaiting During a phone call, if there is a second incoming call, press
to place the first call on hold and switch to the second
phone call. Press
again to switch back to the first call.
CallꢀHold During a phone call, when there are no additional incoming
calls, press to place the call on hold. Press again to
resume the phone call.
Note: Audio transfer, call waiting and call hold must be
supported by the mobile phone and service provider to
function properly.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
Bluetooth®ꢀOperation
StreamingꢀAudioꢀOperation
The XDMA6540 supports A2DP (advanced audio distribution profile) wireless streaming
audio from your Bluetooth mobile device directly to your head unit. You can also control
your music from the front panel of the head unit using AVRCP (audio video remote control
profile).
Notes:
• To stream music to your head unit, your mobile device must support the A2DP and
AVRCP Bluetooth profiles. Check the owner's manual of your mobile device for details.
• Streaming audio must be enabled from your mobile device. This option will vary
depending on the device. Some devices allow streaming audio to be disabled.
After pairing, connecting and enabling streaming audio from a compatible mobile device,
begin playing music using the music player on your mobile device. Once the music is
playing, the following functions can be used to control the music:
• The
• The
• The
• The
button will skip to the next available audio track.
button will skip to the previous audio track.
II button will toggle between play and pause during playback.
button will stop the audio playback.
ll
nn
/
l
Note: Some Bluetooth devices may not fully support these commands.
BluetoothꢀReset
Resetting the Bluetooth module will remove the list of paired phones and delete the list of
recent calls from memory.
To reset Bluetooth, perform the following steps:
1) Press MODEꢀUP/DOWN until the head unit is in Bluetooth mode.
2) Press and hold MENU for 3 seconds to reset the Bluetooth settings back to the factory
default.
CompatibilityꢀNote:
Due to the differences in Bluetooth technology, some mobile devices may be incompatible,
function improperly or may not support all features when used with the XDMA6540.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
Troubleshootingꢀ-ꢀGeneral
Problem
Cause
Action
Yellow wire not connected or incorrect
voltage Red wire not connected or
incorrect voltage
Check connections for proper
voltage (11-16VDC)
Unitꢀwillꢀnotꢀturnꢀonꢀ
(noꢀpower)
Black wire not connected
Fuse blown
Check connection to ground
Replace fuse
Speaker wires not connected
Check connections at speakers
Unitꢀhasꢀpowerꢀ
(butꢀnoꢀsound)
Insulate all bare speaker wires
from each other and chassis
ground
One or more speaker wires touching
each other or touching chassis ground
Yellow or red wire touching chassis
ground
Check for pinched wire
Unitꢀblowsꢀfuses
Speaker wires touching chassis ground
Incorrect fuse rating
Check for pinched wire
Use fuse with correct rating
Unit is not mounted correctly or
backstrap is not secure
Check mounting sleeve and
backstrap support
ExcessiveꢀSkipping
Physical defect in CD, CD-R/RW disc
Check media for scratches
ERROR-02ꢀappearsꢀ
onꢀdisplay
Disc read error or disc is in upside
down
Press EJECT or RESET
Hold EJECT for 3 seconds to
CDꢀwillꢀnotꢀeject
CD mechanism error
force eject the CD
PROTECTꢀappearsꢀ
onꢀdisplay
The WMA file is copy-protected by DRM Write disc using WMA files that
(Digital Rights Management)
are not copy-protected
NOꢀFILEꢀappearsꢀ
onꢀdisplay
Selected file is not available in direct or
alphanumeric search modes
Repeat search using valid
parameters
Version 1.0 to 2.4 ID3 tags
and only ASCII characters are
supported.
NOꢀSUPPORTꢀappearsꢀ An invalid ID3 tag version is present, or
onꢀdisplay
a non-ASCII character is included
ParentalꢀControlꢀLockꢀ If the parental control lock code has been forgotten or lost, press RESET
CodeꢀReset
located behind the front panel to reset the code to "0000".
32
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
LimitedꢀOneꢀYearꢀWarranty
This warranty gives you specific legal
Whatꢀtoꢀdo?
rights. You may also have other rights
which vary from state to state.
1. Before you call for service, check the
troubleshooting guide in your owner’s
manual. A slight adjustment of any
custom controls may save you a service
call.
Dual Electronics Corp. warrants this
product to the original purchaser to be free
from defects in material and workmanship
for a period of one year from the date of
the original purchase.
2. If you require service during the
warranty period, you must carefully
pack the product (preferably in the
original package) and ship it by prepaid
transportation with a copy of the original
receipt from the retailer to an
Dual Electronics Corp. agrees, at our
option, during the warranty period,
to repair any defect in material or
workmanship or to furnish an equal
new, renewed or comparable product
(whichever is deemed necessary) in
exchange without charges, subject to
verification of the defect or malfunction and
proof of the date of purchase. Subsequent
replacement products are warranted for
the balance of the original warranty period.
authorized service center.
3. Please describe your problem in
writing and include your name, a
return UPS shipping address (P.O. Box
not acceptable), and a daytime phone
number with your shipment.
4. For more information and for the
location of the nearest authorized
service center please contact us by one
of the following methods:
Whoꢀisꢀcovered? This warranty is extended
to the original retail purchaser for products
purchased from an authorized Dual dealer
and used in the U.S.A.
• Call us toll-free at 1-866-382-5476
• E-mail us at [email protected]
Whatꢀisꢀcovered? This warranty covers all
defects in material and workmanship in
this product. The following are not covered: Exclusion of Certain Damages: This
software, installation/removal costs,
damage resulting from accident, misuse,
abuse, neglect, product modification,
improper installation, incorrect line
voltage, unauthorized repair or failure
to follow instructions supplied with the
product, or damage occurring during
return shipment of the product. Specific
warranty is exclusive and in lieu of any
and all other warranties, expressed or
implied, including without limitation the
implied warranties of merchantability and
fitness for a particular purpose and any
obligation, liability, right, claim or remedy
in contract or tort, whether or not arising
from the company’s negligence, actual
license conditions and copyright notices for or imputed. No person or representative
com.
is authorized to assume for the company
any other liability in connection with the
sale of this product. In no event shall the
company be liable for indirect, incidental or
consequential damages.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
Specifications
FMꢀTuner Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 8.5dBf
50dB quieting sensitivity: 10dBf
Stereo separation @ 1kHz: 40dB
Frequency response: 30Hz-13kHz
AMꢀTuner Tuning range: 530kHz-1710kHz
Usable sensitivity: 22uV
Frequency response: 30Hz-2.2kHz
General Speaker output impedance: 4~8ꢀohms
Line output voltage: 2ꢀVoltsꢀRMS
Dimensions: 7"ꢀxꢀ7"ꢀxꢀ2"ꢀ(178ꢀxꢀ178ꢀxꢀ51ꢀmm)
USB/SDꢀCard File system: FAT,ꢀFAT32
File extension support:ꢀꢀ.mp3,ꢀ.wma
SD Card maximum device capacity: 16GB
Bluetooth®ꢀProfiles HFP (hands-free profile)
A2DP (advanced audio distribution profile)
AVRCP (audio video remote control profile)
Design and specifications subject to change without notice.
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 18 Watts RMS x 4 channels at 4 ohms and < 1% THD+N
Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6540ꢀOPERATION
FCCꢀCompliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Electronics Corp.
Toll Free: 1-866-382-5476
©2011 Dual Electronics Corp. All rights reserved.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or
iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with
iPod or iPhone may affect wireless performance.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Namsung is under
license.
Sirius, XM and associated marks are registered trademarks of Sirius XM Inc. all rights reserved.
HD Radio™, HD Radio Ready™, and the HD Radio Ready logo are proprietary trademarks of iBiquity Digital Corporation.
The SD logo is a trademark of the SD Card Association.
Other trademarks and trade names are those of their respective owners.
NSA0811-V01
Download from Www.Somanuals.com. All Manuals Search And Download.
|