CAT NO : 16 - 3267
DVD/DVDAUDIO/VIDEO CD/CD PLAYER
POWER
SLOW
SLEEP
OPERATING INSTRUCTIONS
DIMMER
GO TO
SUBTITLE
PROG
REPEAT
DISPLAY
A-B
P
/
I
LANGUAGE
MENU
ANGLE
ZOOM
PBC
SETUP
ENTER
1
2
5
3
6
9
4
8
7
0
MUTE
+10
VOLUME
OPEN / CLOSE
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise autho-
rized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards and Precautions
Power cord protection
Recommended measures for optimum picture ex-
cellence
To avoid any malfunctions of the unit, and to protect
against electric shock, fire or personal injury, please
observe the followingÿ
This unit is a precision device that is constructed us-
ing extremely accurate technology.
• This system has been designed to work with 120-
voltAC current. Connection to a line voltage other
than that may create a safety and fire hazard and
may damage the system. If you are unsure of the
type of power supply to your home, consult your
local dealer or power company.
Soiling or friction affecting the pickup lens or disc drive
can impair the image quality.At the worst, neither video
nor audio will be played back. To obtain optimum pic-
ture quality, the player should be checked (cleaning
and replacement of some parts) every 1,000 hours.
Note that this period varies depending on the environ-
ment (temperature, humidity, dust, ect.) in which the
player is used.
• Hold the plug firmly when connecting or
disconnecting the power cord to the wall outlet.
• Do not run power cords under rugs or carpets or
place heavy objects on them.
Do not attempt to clean the pickup lens yourself.
• Damaged or deformed power cords are hazardous
and should be replaced immediately by a qualified
service technician.
Condensation
Moisture may form on the pickup lens in the following
conditions.
•
•
•
Immediately after a heater has been turned on.
In a steamy or very humid room.
Location and handing
When the unit is suddenly moved from a cold envi-
ronment to a warm one.
•
Air vents are provided in the cabinet to prevent ex-
cessive temperatures inside the unit. Do not place
this unit in closed spaces, cover it, or otherwise
block the vents.
If you suspect this to be the case, turn the power off
and wait at least one hour for the moisture to evapo-
rate.
•
Do not place this unit in direct sunlight, or near heat
sources.
•
•
Keep this unit away from strong magnetic objects.
Do not insert or drop anything into this unit through
the air vents as this could cause serious damage,
possibly resulting in fire.
To avoid interference while watching television
When not in use, we recommend that you leave the
power for your unit turned off. If you experience inter-
ference during normal television viewing, simply turn
the DVD player deck off. This is not a malfunction of
the unit or the television.
•
Do not place any objects containing water or other
liquids on this unit. In the event that liquid should
enter the cabinet, unplug this unit immediately and
contact the dealer or authorized service center im-
mediately.
Cautions on adjusting volume
•
Do not turn up the volume while listening to a por-
tion with very low level inputs or no audio signals. If
you do, the speakes may be damaged when a peak
level portion is played.
•
•
Do not remove the cabinet. Touching parts inside
the cabinet could result in electric shock and / or
damage to the unit.
The safety and operation of this appliance in a ve-
hicle can not be guaranteed.
Nonuse periods
Foreign objects
Do not put fingers or other foreign objects on the
disc tray.
•
When the unit is not being used, turn the power off.
When left unused for a long period of time, the unit
should be unplugged from the householdAC outlet.
•
•
•
Do not insert any foreign objects through any of the
unit’ s openings.
Service
Do not attempt to service the unit yourself.
•
Stacking
Place the unit in a horizontal position, and do not
place anything heavy on it.
•
Please refer any service to an authorized service
center.
•
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards and Precautions
Copyright
Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of the
owner of the copyright. Please refer to relevant laws in
your country.
Copy protection
This DVD player supports Macrovision copy protection.
On DVD discs that include a copy protection code, if
the contents of the DVD disc are copied using a VCR,
the copy protection code prevents the videotape copy
from playing normally.
Manufactured under license from Digital Theater
System, Inc. US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide pat-
ents issued and pending. “DTS”and “DTS Digi-
tal Surround” are trademarks of Digital Theater
Systems, Inc. Copyright 1996,2000 Digital The-
ater Systems, Inc. All rights reserved.
Manufactured under license from Dolby Labo-
ratories. “ Dolby”, “Pro Logic”and the double-D
symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. © 1992-1999
Dolby Laboratories, Inc. All rights reserved.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
General Information
Disc Playback
Introduction ........................................................... 6
Customer record ................................................... 6
Features ............................................................... 6
DVD region code ................................................... 6
Disc terminology ................................................... 6
Conventions about this manual .............................. 6
Unpacking ............................................................. 7
Disc handling and cleaning.................................... 7
DVD Audio discs ................................................... 7
Inserting batteries into the remote control.............. 7
Playing discs with PBC (playback control) .......... 17
Using DVD disc menus ....................................... 17
Viewing disc playback status .............................. 18
Selecting the start time ....................................... 19
Program playback ............................................... 19
Special Functions
Dimming the VFD................................................ 20
Picture CD disc playback .................................... 20
Selecting audio mode for karaoke music ............. 20
Activating Progressive/Interlace mode ................. 21
Setting the sleep timer ........................................ 21
Angle selection ................................................... 22
Picture zoom....................................................... 22
Selecting the subtitle language ........................... 22
Function Overview
Front panel ............................................................ 8
Back panel ............................................................ 8
Remote control...................................................... 9
Connections
Connecting to TV and additional components ...... 10
Troubleshooting ..................................................... 23
Electrical Specifications .................................. 24
Warranty ................................................ 25
Basic Setup
GENERAL SETUP ...............................................11
Initial settings.......................................................11
Using the setup menu ..........................................11
TV display: selecting the aspect ratio...................11
Setting the video output........................................11
Setting the TV type ............................................. 12
Selecting the on screen display (OSD) language 12
SPEAKER SETUP .............................................. 12
Downmix ............................................................. 12
Test tone ............................................................. 12
AUDIO SETUP.................................................... 13
Digital output setting ........................................... 13
Selecting the dynamic range ............................... 13
PREFERENCES SETUP ............................... 13~15
Selecting the audio language .............................. 13
Selecting the disc menu language....................... 14
Selecting the parental control level ...................... 14
Changing the parental control password ........ 14~15
Returning to the original factory default settings .. 15
DVD mode setting ............................................... 15
Disc Playback
General operation ................................................ 16
Basic playback............................................ 16~17
Repeat playback ................................................. 16
A-B repeat playback............................................ 16
Slow motion playback ......................................... 17
5
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Disc terminology
Introduction
• Titles and chapters (DVD-video discs)
DVD video discs are divided into several large
sections called Titles and smaller sections called
chapters.
Thank you for choosing DUAL. With over 100 years of
German technology, DUAL specializes in state-of-the-
art technology and elegant styling, designed to provide
many years of enjoyment. This product is provided with
an immense array of features. We recommend reading
this manual thoroughly before proceeding.
Numbers are allotted to these sections. These
numbers are called title numbers and chapter
numbers.
Customer record
• Tracks (audio and video CD discs)
Audio and video CD discs are divided into sections
called tracks.
The model and serial number of this player are located
on the back panel. Record these numbers in the space
provided and retain this manual as a permanent record
of your purchase. This will aid in the event of theft or
loss.
Numbers are allotted to these sections These
numbers are called track numbers.
• Playback control (video CDs) Video CD discs with
the words playback control on the disc or jacket are
equipped with a function for displaying menus on the
TV monitor. Use the menus to select the desired
position, display information, etc. in a dialogue
fashion.
MODEL NUMBER: DP3140
SERIAL NUMBER: 16 - 3267
Features
•
DVD player with built-in Dolby Digital , supporting
5.1 channel output and DVDAudio feature.
Compatable with DVD, DVD-AUDIO, SVCD, VCD
1.0, VCD 2.0, CDR, CDRW, MP3, CD-DA (audio
CD), KODAK PictureCD, and JPEG picture CD
discs.
This function is referred to as PBC mode for this
system.
•
Conventions about this manual
•
Use this manual to understand how to operate the
controls on the remote control and your new DUAL
DVD player.
•
•
User-friendly DVD navigation functions.
PBC (playback control function for SVCD, VCD 2.0
and MP3 discs.
•
The types of functions and operations that can be
used for a particular disc vary depending on the fea-
tures of that disc. In some cases, these functions
and operations may differ from the descriptions given
in this manual. In this event, follow the instructions
given on the screen. This manual covers basic disc
operations.
•
•
Adjustable flourescent front panel display and on
screen display menus.
Full function ergonomic remote control.
DVD region code
•
•
For some operations, the inhibit icon
may ap-
This player is designed and manufactured for compat-
ibility with Region Management Information that is en-
coded on most DVD discs. This player is designed
only for playback of discs with Region Code 1, or for
discs that do not contain Region Code information. If
there is any other Region Code encoded on a disc,
the disc will not play and the message “ WRONG
REGION ” will appear on the television screen.
pear on the screen. This indicates that the opera-
tion described in this manual is not available for the
current disc.
The illustrations used in this manual are purely for
explanation purposes. The actual displays may look
slightly different.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Disc handling and cleaning
Unpacking
The carton and shipping materials used to protect your
new Dual DVD player during shipment were specipcally
designed to cushion it from shock and vibration. We
suggest that you save this carton and packing
materials for use in shipping if you move, or should the
system ever needs repair.
•
Do not use solvents such as benzine, thinner, com-
mercially available cleaners or anti-static spray in-
tended for viny1 LPs.
Disc installing precautions
•
•
•
Do not install more than 1 disc on disc tray.
Do not place the disc on the tray up-side down.
Do not try to close the disc tray when the disc is
not installed properly.
Check that you have the following
items:
•
•
One DVD player/receiver
One 48-inch double-lead patch cord with red and
white connectors for connecting the composite
audio outputs from this unit to your television.
One 48-incht single-lead patch cord with yellow
connectors for connecting the composite video from
this unit to your television.
DVD Audio discs
•
DVDAudio provides the audiophile listening quality
of vinyl record Hi Fi with 5.1 discrete channels of
sound.
•
• One full function ergonomic remote control
Owner’ s Manual and warranty
•
•
DVD Audio discs are not subject to region codes,
so any DVD Audio disc will play on this unit.
•
Disc handling and cleaning
While most DVD Audio discs contain graphics and
lyrics, they usually do not contain real time video
images.
Disc handling precautions
•
To keep the disc clean, handle the disc by its edge.
Do not touch the surface.
Do not stick paper or tape on the disc.
•
The DVDAudio light on the front panel display sig-
nifies that a DVD Audio disc is playing.
•
• If there is glue (or a similar substance) on the disc,
remove the glue completely before using the disc.
Inserting batteries into the remote control
You can control the system using the supplied remote
control. Insert twoAAbatteries (not included) by match-
ing the + and - on the batteries. When using the re-
mote control, point it at the remote sensor on the front
panel of this system.
•
Do not expose the disc to direct sunlight or sources
such as hot air ducts, or leave it in a car parked in
direct sunlight as there can be considerable rise in
temperature inside the car.
•
•
After playing, store the disc in its case.
Do not write on the label side with a ball-point pen
or other writing utensils.
Notes
•
Do not leave the remote in an extermely hot or hu-
mid place.
•
Be careful not to drop or bend the disc.
•
•
Do not use a new battery with an old one.
Do not drop any foreign object into the remote cas-
ing, particularly when replacing the batteries.
Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so many cause a mal-
function.
Disc cleaning precautions
•
Before playing, clean the disc with a cleaning cloth.
Wipe the disc from the center out.
•
•
If you will not use the remote for an extended period
of time, remove the batteries to avoid possible dam-
age from battery leakage and corrosion.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Overview
Front panel
JOG
STANDBY
VIDEO
SCREEN
VIDEO SCREEN ON/OFF
STANDBY
OPEN/CLOSE
PLAY /PAUSE
STOP
REW FF
POWER
1. STANDBY POWER
Press to turn the system power to STANDBY ON
or OFF.
6. DVD AUDIO LED
Indicates the playing disc is recorded with DVD
AUDIO format when illuminated.
2. VIDEO SCREEN ON / OFF
Press to switch the video signal to ON / OFF.
7. OPEN / CLOSE
Press to open or close the disc tray.
3. STANDBYLED
Indicates the system is in standby mode when
illuminated.
8. PLAY / PAUSE
Press to start or pause the playing disc.
9. STOP
4. VIDEO SCREEN LED
Indicates the video screen mode is on when illumi-
nated.
Press to stop playback.
10.ꢀREW / FF ꢁ
Press to fast reverse playback.
Press to fast forward playback.
5. DOLBY DIGITAL LED
Indicates the playing disc is recorded with Dolby
Digital format when illuminated.
11. ꢂ JOG ꢃ
In disc mode, press to jump to the previous title,
chapter or track.
In disc mode, press to jump to the next title, chap-
ter or track.
Back panel
C
DOLBY/DTS
DVD AUDIO OUT ONLY
2
8
1
3
4
5
6
7
1. DVD AUDIO OUTPUT JACKS
Connect to Dolby Digital recievers equipped with 5.1
input jacks.
5. S-VIDEO JACK
Connect to a TV S-Video input connector.
6. VIDEO JACK
Connect to TV video input connector.
2. AUDIO OUT JACK
Connect to the audio input of an external recording
device or amplifier.
7. COMPONENT VIDEO OUTPUT CONNECTOR
Connect to the TV component video input termi-
nals.
3. DIGTIAL OUT - OPTICAL
Connect to audio equipment with a digital-optical
audio input.
8. AC POWER CORD
Connect to a standardAC outlet.
4. DIGITAL OUT - COAXIAL
Connect to audio equipment with a digital-coaxial
audio input.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Overview
Remote control
10.PBC
Press to set the PBC function on or off.
POWER
27
26
25
1
2
SLOW
SLEEP
DIMMER
11. ꢆ/ꢄ/ꢇ/ꢈꢉENTER
Use to move the screen cursor to a desired option.
GO TO
3
4
SUBTITLE
PROG
24
23
12.NUMBER (0~9 /+ 10)
Select the items or settings directly.
5
6
7
REPEAT
DISPLAY
22
21
20
19
18
13.MUTE
A-B
P /
I
To interrupt or resume audio output.
LANGUAGE
MENU
ZOOM
ANGLE
8
9
14.VOLUME (+ / -)
Press to increase or decrease the master vollume
level.
PBC
SETUP
17
16
10
ENTER
11
15.OPEN / CLOSE
Press to open or close the disc tray.
1
4
2
5
3
6
9
16.ENTER
Press to confirm and execute the highlighted item.
12
13
8
7
0
17.SETUP
Press to enter or exit the setup menu.
MUTE
+10
18.ZOOM
VOLUME
Enlarge the picture.
14
15
19.MENU
OPEN / CLOSE
Press to display the title menu.
20.STOP
Press to stop the playback.
21. P/I
Setting or Changing to PROGRESSIVE or INTER-
LACE mode.
1. SLOW
Press to play a disc in slow-motion.
22.DISPLAY
Press to display the information about the playing
disc.
2. GOTO
Select desired title/chapter or time to start playback.
3. SUBTITLE
Press to select a desired subtitle language.
23.ꢂꢉ-TUNNING + ꢃ
In disc mode, press to skip to next or previous
track.
4. PLAY / PAUSE (ꢄ/ꢅ)
Press to start or pause the playing disc.
24.PROGRAM
Press to play the disc in an order that you
specify.
5. ꢀ- PRESET +ꢁ
Press to play a disc in fast reverse/ forward mode.
6. REPEAT
25.DIMMER
Press to select variations of continuous play.
Press to select different brightness for the VFD.
7. A-B
26.SLEEP
Specify a section and play it repeatedly.
Activates the sleep timers.
8. LANGUAGE
Press to select a desired audio language.
27.POWER
Press to turn the system to POWER ON or to
STANDBY.
9. ANGLE
Changes the angles while playing a DVD disc.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to TV and Additional Components
Pr/Cr
Pb/Cb
Y
VIDEO IN
S-VIDEO IN
TO RECEIVER 5.1 CH INPUT
FL
FR
Y
S-VIDEO
VIDEO
P
r/C
r
Pb/Cb
L
SUBW.
C
DOLBY/DTS
DIGITAL OUT
COMPONENT
VIDEO OUT
VIDEO OUT
SR
SL
R
DVD AUDIOOUTONLY
OPTICAL
COAXIAL
AUDIO OUT
Option 1
AUDIO IN
Connect the S-VIDEO OUT jack to the S-Video in-
put jack on the TV using a S-Video cable (not sup-
plied).
Option 2
Connect the VIDEO OUT jack to the video input
jack on the TV using a video cable (supplied).
Option 3
If your TV does not have inputs for Pr/Cr Pb/Cb Y,
S-VIDEO, or yellow Video jack, use an RF modula-
tor (not supplied) to connect to your TV.
You must connect a TV to the DVD system in order to
use the DVD player. You can connect other audio and
audio / visual components to the DVD system in order
to use the Home Cinema Audio system’s surround
sound capabilities.
Connecting to Audio Component
Use OPTICAL or COAXIAL jacks
-
To enjoy 5.1 channel surround sound, connect to
an amplifier with DTS or Dolby Digital decoder, or,
CD audio recorder. DVD system’s digital audio out-
put should be set to “ SPDIF/RAW ” (default).
Use DVD AUDIO OUTPUT jacks
To enjoy 5.1 channel DVD Audio sound, you will
need to connect DVD AUDIO OUT to your analog
5.1 channel inputs on your receiver. To do this, you
will need 3 sets of L/R audio cables (not supplied)
Important!
-
There are various ways to connect the system
to a TV (as shown in the illustration). You only
need to make one of these connections.
Always refer to the instruction manual of the
connected equipment to make an optical con-
nection.
-
-
Connecting to TV
1 Use the supplied audio cables to connect AUDIO
OUT jacks to the correspondingAUDIO IN jacks on
the TV or other audio/visual components.
2 Use Pr/Cr Pb/Cb Y cables (not supplied) to con-
nect Pr/Cr Pb/Cb Y jacks to the corresponding
video input jacks on a TV.
Note
•
In addition to 3 L/R audio cables for DVD audio, you
will need either the digital-coaxial cable or the digi-
tal-optical cable to enjoy 5.1 channel Dolby Digital
or DTS sound from your DVD video discs.
If your TV is not equipped with Pr/Cr Pb/Cb Y video
input jacks, you can select one of the following al-
ternative connections:
Use AUDIO OUT jacks
For connecting to amplifier, audio system or TV
with analog audio inputs only.
-
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
General setup
General setup
Initial settings
16:9: When connecting to a wide screen 16:9 televi-
sion, select this option. The unit automatically
sets and outputs a recorded signal in correct
aspect ratio. Be sure to set the screen mode on
your wide-screen TV to FULL.
This system is designed with a user-friendly setup
menu. Use the section to take you through the system
and disc setup options and recommendations.
Using the SETUP menu
Press SETUP on your remote control unit to display
the setup menu. Use the ꢆ/ꢄ/ꢇ/ꢈ buttons to select
your preferred option, and press ENTER to confirm a
highlighted selection. To exit setup menu, press
SETUP.
The default setting is 4:3 PS.
4:3 PS
(Pan Scan)
Note
• For DVD Audio, you need to press STOP first then
SETUP to enter the setup menu after finished the
setting, press PLAY to resume.
4:3 LB
(Letter Box)
TV display: setting the aspect ratio
The aspect ratio of a television is the relationship
between it width and height that defines the shape of
the picture. Television sets traditionally have an aspect
ratio of 4:3. Since most DVD discs are recorded in
“ wide aspect ratio ” formats, the picture must be
adjusted to fit on your screen.
16:9
(Wide screen)
--- GENERAL PAGE ---
Notes
•
Some DVD discs do not permit Pan and Scan mode
playback and will automatically playback in
Letterbox mode, and vice versa.
TV DISPLAY
VIDEO OUTPUT
TV TYPE
4:3 PS
4:3 LB
16:9
•
If the 16:9 wide screen option is selected with a
standard 4:3 television, the playback picture will
appear distorted (objects will look thin).
OSD LANG
MAIN PAGE
Setting the video output
Selects the video output terminals.
SET TV DISPLAY MODE
S-VIDEO: Select S-VIDEO, if you have connected the
video output to your television using S-VIDEO
jack.
4:3 PS: The Pan and Scan presentation crops both
sides of the wide screen format to fill a standard
4:3 television screen.
YUV: Select YUV , if you have connected the video
output to your television using the Component
Video Out (Pr/Cr Pb/Cb Y) jacks.
4:3 LB: The Letterbox presentation places black bars
at the top and bottom portions of the screen to
provide the full wide screen format of a movie on
a standard 4:3 television screen.
The default setting is S-VIDEO.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
General setup
SPEAKER SETUP
Downmix
Setting the TV TYPE
To select the color system compatable with the con-
nected television set, use the SETUP menu, select
GENERAL SETUP to access the following settings:
Select the DOWNMIX for LT/RT,STEREO, or OFF.
The default setting is OFF.
LT/RT (left total / right total):Atwo-channel delivery for-
mat for Dolby surround four channels (audio left,
center, right and surround) are matrix encoded
two channels. The terms refer to a Dolby sur-
round compatible downmix.
MULTI SYSTEM: Select this mode when the connected
television that uses a multi-system mode. The
output format will adjust to the video signal of
each disc.
NTSC: If the connected TV uses NTSC system, se-
lect this mode. It will change the video signal of
a PAL disc to output in NTSC format (used in
the USA, Canada and Japan).
STEREO: All sound is reproduced and played through
the front left and right speakers. This enables
standard stereo reproduction.
PAL: If the connected TV uses a PAL system, select
this mode. It will change the video signal of a
NTSC disc to output in the PAL format (used in
Western Europe)
Note
• Only with DVD door open or no disc in loader, you
can access Downmix menu .
Test tone
The default setting is NTSC.
The test tone mode is used after you have connected
your speakers to check the balance level and
connections of each speaker.
Selecting the on screen display (OSD)
language
This setting is used to establish the language that will
be displayed for all operations and on-screen
messages.
Without putting any disc in the loader using the SETUP
menu, select SPEAKER SETUP to turn this function
ON. The test signal, a two second pink sound, will be
generated through the left, center, right, surround
speakers, and subwoofer individually. The location of
the speaker will be displayed on the television screen
and the front display panel, as each speaker is being
tested.
To change this setting, using the SETUP menu,
GENERAL setup screen, to access the OSD LANG
menu. Select one of the five available languages:
ENGLISH, FRENCH, GERMAN, ITALIAN or SPANISH.
The default setting is OFF.
SPEAKER SETUP
Downmix
Note
Use the SETUP menu, select SPEAKER SETUP to
set one of the following DOWNMIX settings:
• When using test tone, downmix should set to off.
--- SPEAKR SETUP PAGE ---
DOWNMIX
LT/RT
TEST TONE
STEREO
OFF
MAIN PAGE
SET DOWNMIX MODE
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
AUDIO SETUP
AUDIO SETUP
Digital output setting
Selecting the dynamic range
Use the SETUP menu, select AUDIO SETUP to ac-
cess the following screen:
In many listening situations, it is objectionable to allow
the sound to become very loud, and thus the loudest
sounds must be compressed downwards in level. Like-
wise, the very quiet sounds would be inaudible and must
be brought upwards in level to be heard. Dolby Digital
satisfies these needs with dynamic range compres-
sion.
--- AUDIO SETUP ---
AUDIO OUT
COMPRESSION
ANALOG
SPDIF/RAW
SPDIF/PCM
To select one of the following settings, use the SETUP
menu, selectAUDIO SETUPto access the COMPRES-
SION menu:
MAIN PAGE
OFF, 1/8, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8, FULL.
The default setting is OFF.
AUDIO RELATED
Note
• The higher the setting selected will result in audio
with a more fully compressed dynamic range.
Set the audio output format toANALOG, SPDIF/PCM
or SPDIF/RAW.
ANALOG:Analog will have no signal out from “ digital
out ” jacks.
PREFERENCES SETUP
You can access PREFERENCES only in stop mode.
SPDIF/RAW: Will generate raw signal only from “ digi-
tal out ” jacks.
Selecting the audio language
Select a desired audio language for a DVD disc that
has audio data recorded in multiple-languages. To
adjust this setting, use the SETUP menu, select
PREFERENCES to access the following screen:
SPDIF/PCM: Will have sampling of 44.1kHz to 48 kHz
and also generate signal out from “ digital out ”
jacks.
--- PREFERENCES PAGE ---
The default setting is SPDIF/RAW.
AUDIO
ENGLISH
FRENCH
GERMAN
ITALIAN
Notes
•
•
•
When playing DVD audio, please select ANALOG
to get the highest performance of audio output from
the analog 5.1CH jacks.
When playing DVD video, please select the SPDIF/
RAW in order to have DTS/Dolby output from the
digital out jacks.
SPDIF/RAW will also provide output from analog
5.1CH jacks for the DVD Audio, with 20 bit sam-
pling cycle compare to 24 bit sampling cycle at
ANALOG Mode.
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
DVD MODE
SPANISH
MAIN PAGE
PREFERREDAUDIO LANGUAGE
In the stop mode, press ꢀ/ꢁ to select the preferred
language for audio.
The default setting is ENGLISH.
Notes
•
If you have selected a language that is not recorderd
on the DVD disc, one of the recorded languages
will automatically be selected.
•
To select a recorded language while the DVD disc
is playing, press LANGUAGE .
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
PREFERENCES SETUP
PREFERENCES SETUP
Selecting the disc menu language
Select a desired language when playing a DVD disc
that has menu data recorded in multiple-languages.
To adjust this setting, use the SETUP menu, select
PREFERENCES to access the following screen:
this function. If the entered password is incorrect,
you will not be able to change the level.
•
The lower the value is, the more strict the limitation.
If the parental control level of the loaded DVD disc
is lower than the level set, the screen will display
“ PARENTAL VIOLATION ” message, and refuse
to play the disc.
•
--- PREFERENCES PAGE ---
Changing
password
the
parental
control
AUDIO
ENGLISH
FRENCH
GERMAN
ITALIAN
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
DVD MODE
To change the parental control password use the
SETUP menu, select PREFERENCES to access
the password menu. Press ENTER to enter the old
password “ 3308 ” . (“ XXXX ” will appear as you enter
the numbers).
SPANISH
MAIN PAGE
--- PREFERENCES PAGE ---
PREFERRED MENU LANGUAGE
AUDIO
DISC MENU
PARENTAL
The default setting is ENGLISH.
PASSWORD
DEFAULTS
DVD MODE
CHANGE
Selecting the parental control level
This player allows parents to set a restriction level
preventing the playback of certain discs.
To set this feature, use the SETUP menu, select
PREFERENCES to access the following screen:
MAIN PAGE
CHANGE PASSWORD
--- PREFERENCES PAGE ---
AUDIO
When prompted to enter a new password, enter a 4-
digit code and enter it again when prompted to confirm
password. Press ENTER once more to change the
password from “ 3308 ” to the new 4-digit password
you have entered.
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
DVD MODE
2
3 PG
4 PG13
5
6 PG-R
7 NC-17
8ADULT
NO-PARENTAL
--- PASSWORD CHAGE PAGE ---
MAIN PAGE
OLD PASSWORD :
NEW PASSWORD :
CONFIRM :
SET PARENTALCONTROL
Press ꢇ/ꢈꢉto select the desired parental level. Press
ENTER enter password.
The initial setting is NO PARENTAL.
PLEASE ENTER OLD PASSWORD
Notes
•
Before changing the parental control level, you must
enter the preset password (4-digit code) to unlock
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
PREFERENCES SETUP
PREFERENCES SETUP
DVD MODE setting
Notes
•
DVDAUDIO
• This password is used to unlock the parental control
level reset function. So, select a password you can
easily remember.
It can support DVD-AUDIO (with / without video con-
tent) and DVD-VIDEO disc format.
• The disc must be recorded with a parental lock, for
this feature to function. Some DVD discs are not
encoded with a rating though the movie rating is
printed on the disc jacket. The parental lock func-
tion does not work for such discs.
•
DVD VIDEO
It can support DVD-AUDIO (with video content) and
DVD-VIDEO disc format.
The defaut setting is DVD AUDIO
• If you forget the new password code, press ZOOM
four times when prompted for the password and the
system will return to the default password.
--- PREFERENCES PAGE ---
AUDIO
Returning to the original factory
default settings
To return all settings to the factory defaults, use the
SETUP menu, select PREFERENCES to access the
defaults menu as shown:
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
DVD MODE
DVDAUDIO
DVD VIDEO
MAIN PAGE
--- PREFERENCES PAGE ---
SET DVD MODE
AUDIO
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
DVD MODE
•
•
Press ꢀ/ꢁ to select DVD AUDIO or DVD VIDEO
and press ENTER to confirm .
After selected these mode, play the DVDAudio disc.
The selected DVD mode “ DVD VIDEO or DVD
AUDIO” will be shown on the TV screen for a mo-
ment.
RESET
MAIN PAGE
Notes
LOAD FACTORYSETTINGS
• Only with DVD door open or no disc in loader, you
can access DVD MODE MENU .
• In DVD VIDEO mode, when DVD-Audio (with video
content) disc is playing, it only playing the video
content to access the DTS or Dolby Digital audio or
other standard DVD mode option.
Select and press ENTER to return the system to its
original factory settings.
IMPORTANT: The parental control level and the
password will not be reset.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
General operation
Basic playback
IMPORTANT: Please note that some DVD movie discs
may not have all the features described in this chapter.
For example, older movies may not allow you to select
multiple camera angles. Refer to the instructions or
liner notes that are included with each disc to
determine what features and operations are available
on that particular disc.
Fast playback of DVD and MP3 discs
Press
repeatedly to select one of the following fast
FFX8
forward speeds: FFX2
PLAY
FFX4
FFX6
Press
repeatedly to select one of the following fast
reverse speed: FRX2
PLAY
To resume normal play immediately, press /ll .
FRX4
FRX6
FRX8
1. Turn your television set’ s power on, and set the
channel to the video input.
Fast playback of VCD and CD discs
Press
repeatedly to select one of the following fast
FFX2
2. Press POWER on the front panel to turn on the
main power of this system. The front panel display
lights up, and the DVD logo screen appears on the
television screen.
forward speeds: FFX1
PLAY
FFX3
FFX4
Press
repeatedly to select one of the following fast
FRX4
reverse speeds: FRX1
PLAY
To resume normal play immediately, press /ll .
FRX2
FRX3
3. Press OPEN/CLOSE, and place a disc on the disc
tray. Press it again to close the tray.
Repeat playback
Note
Use this function to set the player to repeat individual
tracks on CD or Video CD discs, chapters or titles on
DVD discs, an entire disc, or all the discs loaded in
the player.
•
Load the disc placing the label side face up, and
using the disc tray as a guide for proper alignment.
When playing a double-sided DVD disc, load it with
the desired playing side face down.
When playing DVD discs:
Press REPEAT repeatedly to select the following:
4. Use the master VOLUME (+/-) buttons to increase
or decrease the volume level.
CHAPTER REPEAT ON
REPEAT OFF
TITLE REPEAT ON
5. Press MUTE to shut off the sound. To restore the
volume, press it again.
When playing CVD, SVCD, CD and MP3 discs
Press REPEAT repeatedly to select the following:
6. To start playback, press /ll . To interrupt or pause
playback, press /ll again.
REPEAT ONE
REPEAT ALL
REPEAT OFF
When playing MP3 discs (In menu mode):
Press REPEAT repeatedly to select the following:
Note
• Some discs will start playing automatically, and oth-
ers will display a menu on the television screen.
Use the ꢆ/ꢄ/ꢇ/ꢈ or the number (0 ~ 9, +10)
buttons to select desired a track/chapter and then
press ENTER to start playback.
REPEAT ONE
ALL
FOLDER REPEAT
REPEAT
REPEAT OFF
Notes:
•
•
•
•
Use the repeat function with the programming mode
to repeat tracks or chapters.
7. To stop playback, press STOP
.
This function is only available when playback is
selected.
8. To skip to the next or previous track / chapter press
l repeatedly during playback.
When playing CVD and SVCD discs, set the PBC
(playback control) mode to OFF to use this function.
The front panel display will display “ REP 1 ” when
chapter repeat mode is selected; and “ REP
ALL” when repeat mode is selected.
l
/
Fast search
Press for fast reverse search and
ward search. To change the searching speed press
for fast for-
• This function is not available for some DVD-AUDIO
discs.
/
tions:
repeatedly to select one of the following op-
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc playback
Basic playback
Playing discs with PBC (playback control)
A-B repeat playback
PBC playback allows you to play Video CD discs in-
teractively, following the menu on the television screen.
Playing VCD discs with PBC (playback
control)
Use this function to play a specific portion in a chapter
or track repeatedly. This is useful to memorize lyrics
or watch a portion of a disc over and over.
Some Video CD discs have PBC (playback control)
menus that are displayed automatically upon playback.
Use these menus to select playback options.
1. Press A-B at the beginning of the selection you want
to repeat. The “ A ” indicator will be displayed.
2. Press A-B again at the end of the selection. The
“ A-B ” indicator will be displayed, and this section
will now repeat continuously.
When playing VCD2.0 discs with PBC,
the menus will not appear automatically. Press MENU
, to view and use the menus.
3. Press A-B again to cancel and resume normal
playback.
When playing MP3 discs with MENU, the
menus will appear automatically and will continue to
appear during playback. Press ꢈ/ꢇ/ꢄ/ꢆto select
the desired song, then press ENTER or PLAY to begin
playback.
Notes
•
•
When using this function with DVD discs, both the
start and end point of the repeat must be in the
same title.
Notes
To repeat a section of a disc just once, press A-B
at the beginning of the section, then press PLAY/
PAUSE at the end. The playback will jump back to
the start point.
•
•
•
While playing a disc with PBC ON functions, the
REPEAT function does not work.
Press PBC . “ PBC OFF ” will appear on the TV
screen. If a disc is playing, the playback will stop.
Press /ll to start (or restart) playing the disc from
the beginning or use number key to select a de-
sired track.
•
•
This function is only available when playback mode
is selected.
TheA-B repeat function is canceled when you stop
the playback, open the disc tray, or turn the power
off.
•
•
Press MENU again to switch MENU OFF.
Follow the instructions on the menu screen for in-
teractive operations.
•
This function is not available for some DVD-AUDIO
discs.
•
Refer to the instructions supplied with the disc, as
the operating procedure may differ according to the
Slow motion playback
To view playback in slow-motion, press SLOW on the
remote control unit during playback.
Video CD disc.
Using DVD disc menus
When playing DVD discs:
Press SLOW repeatedly to select the slow motion
speed and direction as follows:
SF ( slow forward) , SR (slow reverse) .
1. Press MENU while playing a DVD disc.
The “ TITLE MENU or ROOT MENU ” will be dis-
played on the television screen for a moment, and
then the title menu appears. The contents of the
menu vary from disc to disc.
SFX2
SFX4
SLOW OFF.
SFX8
SRX2
SRX4
SRX8
2. Use the ꢆ/ꢄ/ꢇ/ꢈ or the number (0~9 / +10) but-
tons to select the desired title or chapter.
When playing CVD, SVCD or VCD discs:
Press SLOW repeatedly to select the slow motion
speed as follows:
SFX1
3. Press ENTER to start playback.
SFX2 SFX3
SLOW OFF.
Notes
•
Notes
Depending on the DVD disc, you may not be able
to select the title or chapter.
• The smaller the number, the slower the speed.
• This function is not available for CD or MP3 discs.
• On some discs, the slow-motion playback function
is not available.
•
Depending on the DVD disc, a “title menu” may sim-
ply be called a “menu” or “title” in the instructions
supplied with the disc.
•
This function is not available for some DVD-AUDIO
discs.
•
For some DVD discs, when you press MENU , play-
back will restart from the beginning of the disc.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Viewing disc playback status
Viewing disc playback status
You have the option to view current information, such
as titles and chapters on DVD discs or tracks on VCD
and CD discs.
When playing SVCD, VCD or CD discs
1. Press DISPLAY repeatedly to display the following
status information on the television screen:
The information will be displayed on the televison screen
and on the front panel display. Some of the disc may
not have exact display so following depends on the
information in the disc.
SINGLE ELAPSED
00 : 01 : 23
When playing DVD, DVD-Audio discs
SINGLE REMAIN
00 : 03 : 21
1. Press DISPLAY repeatedly to display the following
status information on the television screen:
TOTALELAPSED
00 : 12 : 34
TITLE 02 / 05 CHAPTER 001 / 006
00 : 34 : 56
TOTALREMAIN
00 : 54 : 32
TITLE REMAIN
00 : 34 : 56
For Video CD, SVCD if PBC is set to on.
CHAPTER ELAPSED
00 : 01 : 23
SINGLE ELAPSED
00 : 01 : 23
CHAPTER REMAIN
00 : 03 : 21
SINGLE REMAIN
00 : 03 : 21
2. Press DISPLAY again, to turn the display function
off immediately.
2. Press DISPLAY again, to turn the display function
off immediately.
When playing MP3 discs
Notes
1. Press DISPLAY repeatedly, to view the following
staus information on the televison screen:
•
•
•
When playing CD disc, track and time information
will appear on the front panel display.
Some VCD discs will display the time information
on the television screen.
CHAPTER ELAPSED
CHAPTER REMAIN
00 : 01 : 23
00 : 02 : 23
When playback stops, the display function auto-
matically resets to off.
2. Press DISPLAY again, to turn the display function
off immediately.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Program playback
Selecting the start time
This function is for use with CD and VCD discs. By
selecting and programming the order of the tracks on
a disc to be played, you can create your own program.
One program can be stored in the system and contain
up to 99 tracks.
This function allows you to start playback at any cho-
sen time on the disc.
When playing DVD discs
1. Press GOTO repeatedly, to display the following
menu on the television screen:
1. In stop mode, press PROGRAM on the remote con-
trol unit. The program mode display appears on the
TV screen and the front panel display.
TITLE 02 / 05 CHAPTER 001 / 006
program play indicator lights
up on the front panel display
TITLE 02 / 05 TIME - - : - - : - -
PGM
- Use the number (0~9 / +10) buttons to input the
desired title or chapter number, and press ENTER to
start playback from that selection.
programmed
numbers
track numbers
OR
2. Use the number (0 ~ 9,+10) buttons to input the
track numbers in a desired order.
- Use the ꢆ/ꢄ buttons to select the desired title or
chapter number, and press ENTER to start play-
back from that selection.
If you attempt to program more than 99 tracks,
“
” will be displayed.
TITLE 02 / 05 CHAPTER 001 / 006
3 .Repeat step 2 to add more tracks to the program
list.
TITLE 02 / 05 CHAPTER 001 / 006
4. To begin program playback, press PLAY/PAUSE /
ll or ENTER.
When playing Video CD discs
5. To stop playback, press STOP once.
6. To cancel the program, press STOP again.
Notes
1. Press GOTO , the following menu appears on the
TV screen:
GOTO
- - : - -
•
•
•
This function is not available when playing DVD and
MP3 discs.
To repeat playback for the programmed tracks,
press REPEAT while in the program playback mode.
The program sequence is canceled when you press
2. Use the number (0~9 / +10) buttons to input the
desired title or chapter number, and press ENTER
to start playback from that selection, but the time
you enter must be less than the total time of the
disc.
STOP
power off.
twice, open the disc tray, or turn the
Note
• This function is useless in PBC (playback control)
ON.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Functions
Dimming the VFD
Picture CD disc playback
To adjust the VFD (video front display) brightness, press
DIMMER on the remote control repeatedly to select
In the menu use the ꢆ/ꢄ/ꢇ/ꢈꢉbuttons to select the
desired albums / titles and press ENTER . Aslideshow
will begin from this point.
one of the following settings: MID
The default setting is HIGH.
LOW
HIGH.
During playback you can:
- Press ꢂ or ꢃ to select another title / picture in
the current folder.
Picture CD disc playback
- Press ꢆ/ꢄ/ꢇ/ꢈꢉon the remote to rotate / flip the
picture files.
This system allows you to view Kodak and JPEG for-
matted Picture CD discs on your television screen. Load
the disc with the lable side up. It may take a few mo-
ments for the system to read the contents before be-
ginning playback.
- Press ꢄ/ꢅ to pause / resume playback.
- Press „ to stop playback.
Note
•
Some files on Kodak or JPEG discs may be dis-
torted during playback due to the configuration and
characteristics of the disc.
Viewing Kodak Picture discs
Kodak Picture CD disc menus will be displayed auto-
matically on the television screen with up to 9 thumb-
nail pictures at a time, and continue as a slide show
until all photos are previewed.
Selecting audio mode for karaoke music
When playing karaoke or similarly
formatted DVD discs, it is possible to select
vocal audio, or either right or left channel depending
on the disc.
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
ꢇ
Press LANGUAGE repeatedly during playback to
switch the audio output mode as follows:AUDIO 1
ꢈ
AUDIO 2
AUDIO 1 VOCAL
AUDIO 2 VOCAL.
Use the ꢆ/ꢄ/ꢇ/ꢈꢉbuttons to select a picture, and
press ENTER to enlarge it to fill the television screen,
or use the ꢂ or ꢃ buttons in the menu to view the
previous / next page (if available).
When playing karaoke or similarly
formatted VCD discs, it is possible to select
stereo, or either right or level channel mono depending
on the disc.
During playback you can:
- Press ꢆ/ꢄ/ꢇ/ꢈꢉon the remote to rotate / flip the
picture files.
Press LANGUAGE repeatedly during playback to
switch to the audio output mode as follows: LEFT
- Press ꢄ/ꢅ to pause / resume playback.
- Press „ to stop playback, and return to the 9
thumbnail menu.
VOCAL
RGHT
RIGHT VOCAL
STEREO.
MONO LEFT
MONO
When playing karaoke or similarly
formatted CD discs, it is possible to select
stereo, or either right or level channel mono depending
on disc.
Viewing JPEG formatted discs
To begin playback, press MENU on the remote control
unit. Picture CD discs with JPEG format menus will be
displayed as a list of albums / titles menu on the tele-
vision screen.
Press LANGUAGE repeatedly during playback to
switch to the audio output mode as follows: MONO
'$7(ꢉ&'ꢉ0(18
5227ꢉꢉꢉꢉꢉꢉꢉꢉꢉꢉꢉꢉꢉꢉꢉꢉꢉꢊꢉꢉ
5RRW
LEFT
MONO RIGHT
STEREO.
7,7/(ꢉ1$0 (ꢀꢉꢉꢉꢉꢉꢉꢀ
7,7/(ꢉ1 $0 (ꢃꢉꢉꢉꢉꢉꢉꢃ
7,7/(ꢉ1 $0 (ꢆꢉꢉꢉꢉꢉꢉꢆ
7,7/(ꢉ1 $0 (ꢁꢉꢉꢉꢉꢉꢉꢁ
Note
• This system does not support CD-G formatted discs.
7,7/(ꢉ1$0 (ꢄꢉꢉꢉꢉꢉꢉꢄ
7,7/(ꢉ1 $0 (ꢇꢉꢉꢉꢉꢉꢇ
7,7/(ꢉ1 $0 (ꢂꢉꢉꢉꢉꢉꢂ
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Functions
Activating PROGRESSIVE/INTERLACE mode
Pr/Cr
Pb/Cb
Y
FL
FR
VIDEO
Pr/Cr
Y
S-VIDEO
Pb/Cb
L
SUBW.
C
DOLBY/DTS
DIGITAL OUT
COMPONENT
VIDEO OUT
VIDEO OUT
SR
SL
R
DVD AUDIO O NLY
OPTICAL
COAXIAL
AUDIO OUT
The progressive-scan display presents 60 complete
frames per second, rather than the 30 frames per sec-
ond of interlaced scanning (ordinary normal TV sys-
tem). With nearly double the numbers of line, progres-
sive scan offers higher picture resolution and eliminates
bothersome motion artifacts those jagged edges on
moving objects.
Notes
•
•
•
Complete these steps within a 5 second period to
switch modes.
When the switch is successful, the relevant mes-
sage will be displayed on the televison screen.
For some TV modes, may cause blank TV screen,
when progressive scan switch off. In such case,
unplug the CR/CB/Y connection.
To enjoy the full quality potential offered by pro-
gressive scan feature, a progressive scan TV
equipped with 480p input is required.
Setting the sleep timer
1. Connecting COMPONENT VIDEO OUT
Use this function to program the system to turn off
automatically after a specified amount of time. Press
SLEEP repeatedly, to select the following time
intervals in minutes:
-
Use the Pr/Cr Pb/Cb Y (red / blue / green) cables,
to connect Pr/Cr Pb/Cb Y jacks to the correspond-
ing 480p video input jacks or cables as CR/CB/Y or
YUV on a TV.
15
30
45
60
90
120
OFF
2. Activating progressive scan
-
Access to setup menu, set video out to YUV (Please
refer to PAGE 11 “ VIDEO output setting ” for de-
tails.)
- When you have selected the specified time, the
“ SLEEP ” indicator lights on the television screen
and front panel display.
-
In the stop mode , press P/I and ENTER to switch
PROGRESSIVE mode.
- To reset the time, press SLEEP again to make
another selection.
- To check the remaining time before the system turns
off, press SLEEP. The remaining time will be
displayed on the television screen and front panel
for a few seconds.
3. Deactivating progressive scan
-
Using the SETUP menu, set video out to S-VIDEO
(Please refer to PAGE 11 “ VIDEO output setting ”
for details.)
- To cancel the sleep function, press SLEEP until it
reaches OFF.
-
In the stop mode , press P/I and ENTER to switch
PROGRESSIVE scan mode back to INTERLACE
mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Function
Picture zoom
Angle selection
The zoom function allows you to enlarge the picture
on the television screen and to pan through the enlarged
image.
Some DVD discs contain scenes which have been shot
simultaneously from a number of different angles. For
these discs, the same scenes can viewed from each of
the different angles. (The recorded angles differ from
disc to disc).
1. Press ZOOM on the remote control unit repeatedly
to select the following magnification factors:
1. Set the angle function to ON by pressing ANGLE
on the remote control during playback.
2. As scenes recorded with multiple angles begin to
:
ZOOM x 1.5
ZOOM x 2
play, the angle icon
screen.
3. Press ANGLE repeatedly to view the scene from dif-
will appear on the television
ZOOM x 3
ZOOM OFF
ferent angles.
For example: 1/4, 2/4, 3/4, 4/4.
2. Press ꢆ/ꢄ/ꢇ/ꢈ to pan through the enlarged image
Notes
• This function is only available during playback.
• This function is not available when playing CD or
MP3 discs.
• This setting will be cancelled automatically when
the disc tray is opened or the power is turned off.
Selecting the subtitle language
This function is available for DVD discs recorded with
subtitles in multiple languages. To display the current
language selection press SUBTITLE once during
playback. Continue pressing to select other subtitle
languages. Press ENTER to continue playback with
the desired subtitle language.
Notes
• Some DVD discs are recorded with subtitles that
cannot be turned off.
• Subtitles may not appear immediately after you have
turned them on.
• Some DVD discs allow you to change subtitle
selections only via the disc menu. Use the ꢆ/ꢄ/
ꢇ/ꢈ buttons to select the desired language or turn
the subtitles ON or OFF and then press ENTER .
• Use the SETUP menu to select a preferred subtitle
language.
Notes
• The angle icon
:
will disapear imediately when
you press ANGLE on the remote control, or after
five seconds.
• This function is only available when the disc has
been recorded with scenes shot from more than one
angle.
• The maximum number of subtitle languages
stipulated by the manufacturer is 32.
• If after pressing ANGLE , the inhibit icon
is
displayed on the television screen, this indicates
that the angle function is not available for the disc.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you experience any of the following difficulties while
using the system, use this troubleshooting guide to
help you remedy the problem. Should any problem
persist, consult an authorized service center.
The sound loses stereo effect when you play a
Video CD or a CD
•
Set the Audio mode to “STEREO” in the SETUP
menu.
Make sure you connect the system appropriately.
•
No power
•
Check to make sure the power cord is firmly
plugged into the power outlet.
The surround effect is difficult to hear when you
are playing a Dolby Digital sound track
•
One of the safety mechanisms may be operating.
In this event, unplug the player from the power out-
let briefly and then plug it in again.
•
Check the speaker connections.
•
Depending on the DVD disc, the output signal may
not be the entire 5.1 channel but monaural or stereo
even if the sound track is recorded in Dolby Digital
format.
No picture
•
•
Check that the system is connected securely.
The video connection cord is damaged. Replace it
with a new one.
The sound comes from the center speaker only
•
Depending on the disc, the sound may come from
the center speaker only.
•
Make sure you connect the system to video input
connector on the TV.
Make sure you turn on the TV.
•
•
No sound is heard from the center speaker
Make sure you select the video input channel on
the TV. Refer to your TV manual if you are not sure.
•
•
•
Make sure the Center is set to “ ON ” in SETUP
menu.
You may set the listening mode to Dolby Pro Logic
Phantom .
Adjust the speaker volume.
The picture noise appears
Take the disc out and clean it.
•
•
If video from this system has to go through your
VCR to get to your TV, the copy-protection applied
to some DVD programs could affect picture quality.
If you still experience problems after checking your
connections, please try connecting your DVD sys-
tem directly to your TV’s S-Video input, if your TV
is equipped with this input.
No sound or only a very low-level sound is heard
from the rear speakers
•
Make sure the Rear is set to “ON” in SETUP menu.
Adjust the speaker volume.
•
The language for the subtitles cannot be changed
when you play a DVD
The aspect ratio of the screen cannot be changed
even though you set “TV DISPLAY” in the SETUP
menu when you play a wide picture.
•
Multilingual subtitles are not recorded on the DVD.
Changing the language for the subtitles is prohib-
ited on the DVD.
•
•
•
The aspect rate is fixed on your DVD disc.
If you connect the system with the S-Video cable,
connect directly to the TV. Otherwise, you may not
change the aspect rate.
The subtitles cannot be turned off when you play
a DVD
•
Depending on the TV, you may not change the as-
pect rate.
•
Depending on the DVD, you may not be able to turn
the subtitles off.
Severe hum or noise is heard
•
The angles cannot be changed when you play a
DVD
Check that the speakers and components are con-
nected securely.
•
•
Multi-angles are not recorded on the DVD.
Change the angles when the angle mark appears
on the TV screen.
•
Check that the connection cords are away from a
transformer or motor, and at least 3 meters away
from a TV set or fluorescent light.
•
Changing the angles is prohibited on the DVD.
•
•
Move your TV away from the audio components.
The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
The system does not operate properly
•
Static electricity, etc., may affect the system’s op-
eration. Press POWER to turn off the system. Then
press POWER again to turn the system back on.
•
Take the disc out and clean it.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical Specification
DVD Player
Pickup ......................................................................................... Semiconductor laser, Wavelength 650 mm
Signal system .............................................................................................................................NTSC / PAL
Video signal horizontal resolution ......................................................................................... 480 lines (DVD)
Video signal-to-noise ratio .......................................................................................................... 50 dB (DVD)
Audio frequency response (at 2 CH stereo mode).......................... DVD (PCM): 20 Hz ~ 20 kHz (+/- 3.0 dB)
................................................................................................................... CD: 20 Hz ~ 20 kHz (+/- 3.0 dB)
Audio signal-to-noise ratio .................................................................................................................... 70 dB
Dynamic range ...................................................................................................... DVD : 80 dB ; CD: 80 dB
Video outputs
CVBS Video........................................................................................................................... 1Vp-p 75 ohms
S-video ............................................................................................................................ Y: 1 Vp-p 75 ohms
................................................................................. C: PAL 0.3 Vp-p 75 ohms / NTSC 0.286 Vp-p 75 ohms
Component video out .............................................................................................................1 Vp-p 75 ohms
Optical and Coaxial out ...................................................................................................... 0.5 Vp-p 75 ohms
Audio line outputs
Audio.L/R ..........................................................................................................................2 Vrms, 47k ohms
Main Unit
Power supply............................................................ ....................................... 110 ~220 V AC 50 / 60 Hz
power consumption.......................................................... .................................................. 15W maximum
Dimensions .......................................................................................................... W 430 x H 52 x D 250mm
Weight .................................................................................................................................................2.7 kg
°
Operation Temperature ....................................................................................... 32 F ~19.4 F (0 C ~ 45 C)
°
Operation Humidity .........................................................................................................................15 ~ 75%
Design and specifications are subject to change without notice. Weight and dimensions are
approximate.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal
use for ninety (90) days from the date of purchase from RadioShack companyowned stores and authorized RadioShack
franchisees and dealers. EXCEPTAS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES
AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED
WARRANTIES CONTAINED HEREIN. EXCEPTAS PROVIDED HEREIN, RadioShack SHALLHAVE NO LIABILITY
OR RESPONSIBILITYTO CUSTOMER ORANYOTHER PERSON OR ENTITY WITH RESPECTTOANYLIABILITY,
LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT
OR ARISING OUT OFANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO,ANY DAMAGES
RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT ORANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIALDAMAGES, EVEN IF RadioShack HAS BEENADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as
proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law:
1) Correct the defect by product repair without charge for parts and labor.
2) Replace the product with one of the same or similar design.
3) Refund the purchase price. All replaced parts and products, and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the original
warranty period. You will be charged for repair or replacement of the product made after the expiration of the
warranty period.
This warranty does not cover:
1) Damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal
usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence
of excess voltage or current.
2) Any repairs other than those provided by a RadioShackAuthorized Service Facility.
3) Consumables such as fuses or batteries.
4) Cosmetic damage.
5) Transportation, shipping or insurance costs.
6) Costs of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102 12/99
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|