Dixon Lawn Mower ZTR 428 User Manual

TECHNICAL DATA BROCHURE - ZTR 428 & 429  
DATE 8/89 (Rev.)  
PAGE  
1
of 11  
MPORTANT -- READ OPERATOR’S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS.  
Deluxe Seat Adjustment  
Easy hand lever action allows forward and backward movement, of seat.  
No bolts to loosen or tighten.  
Mower Blade Operation  
1.  
To start mower blades, pull up slightly on blade drive switch handle  
and move it forward to the "ON" position.  
To stop mower blades, move switch handle to the "OFF" position.  
2.  
Body Removal  
1.  
Disconnect throttle cable from engine.  
2.  
Disconnect rear wiring loon from the body-by turning the threaded collar  
on connector in a counterclockwise direction. This plug is located at  
the right rear of body.  
3.  
4.  
5.  
6.  
Remove the four control lever bolts and remove upper control levers  
(P/N 9079 A 9080).  
Remove the two acorn nuts on floor of body and release latches on  
the rear of body near each side.  
Place height adjustment lever in the vertical position, engage the  
parking brake and carefully lift body off the chassis.  
Reverse above procedures to install body.  
Safety Checks -- "Important"  
1.  
After reassembly of body onto chassis and while seated on the mower,  
attempt to start the engine with mower deck engaged. The engine should  
not start. If engine does start, return mower to an Authorized Dixon Dealer  
for adjustment or repair.  
2.  
Disengage mower deck and start engine with the operator in a normal seated  
position on the mower. Engage mower deck and remove weight from the  
seat. The engine should stop. If engine does not stop when operator rises  
from seat, return mower to an Authorized Dixon Dealer for adjustment or  
repair.  
Parking Brake Adjustment  
1.  
2 .  
Remove body as described above.  
Adjustment points are located at rear of transaxle on each side.  
Remove roll pins from swivel fitting (P/N 2172). Turn swivel fitting on  
brake rod (P/N 6100) in, to tighten. Just enough to prevent brake from  
slipping when engaged. 3.  
Reinstall roll pin.  
CAUTION: Over tightening may cause premature wear, on brake band  
(P/N 6085).  
Dixon Industries, INC  
.
Box 1569  
Coffeyville, Kansas 67337-0945 (316)251-2000  
Airport Industrial Park  
TELEX: 417109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHASSIS ASSEMBLY (MODEL 429 & 428)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BODY ASSEMBLY (MODEL 429 & 428)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGINE ASSEMBLIES (MODEL 429 & 428)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WIRING (MODEL 429 & 428)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cornelius Beverage Dispenser A8530 User Manual
Cornelius Frozen Dessert Maker P N 629088733 User Manual
Craftsman Air Compressor 919176730 User Manual
Crate Amplifiers Musical Instrument PX700DLX User Manual
Creative Labs Digital Camera 02VF016000000 User Manual
Crosley Clothes Dryer W10096992A User Manual
Cub Cadet Spreader TR20 User Manual
Dual Cassette Player MXC22 User Manual
Futrex Scale 5500A WL User Manual
GE Washer GBVH5200 User Manual