Desa Pole Saw 110731R User Manual

POLE SAW ASSEMBLY  
Pole/Bracket Replacement Kit - 110731R  
WARNING:Verify both saw and pole are not connected to power source before assembly.  
ASSEMBLY PROCEDURE  
1. Push in and hold trigger lockout button. Squeeze and hold trigger. (see Figure 1, Steps 1 and 2)  
2. Continue to hold trigger while sliding the handle bracket onto chain saw handle (see Figure 1, Step 3). The  
trigger support on the bracket will hold the trigger in the “ON” position (see Figure 2).  
3. Attach pole assembly to chain saw. Align the holes in the pole bracket and handle bracket. Using four Philips  
head screws and lock washers provided, insert screws through lock washers and holes in pole bracket. Tighten  
screws securely with screwdriver into weld nuts of handle bracket (see Figure 2).  
4. Plug chain saw power cord into receptacle end of pole assembly power cord (see Figure 3).  
Step 3 - Slide Handle Bracket onto Chain Saw  
Handle. Note: Verify Trigger Support is Under the  
Trigger and the Trigger is in the “ON” Position.  
Handle Bracket  
Lockout Button  
Trigger Support  
Chain Saw  
Power Cord  
3
Pole Assembly Power  
Cord Receptacle  
Trig-  
1
2
Figure 3 - Connecting Chain Saw Power Cord  
to Pole Assembly Power Cord  
Step 1 - Push In  
Lockout Button  
Step 2 - Depress Trigger  
TECHNICAL SERVICE  
Figure 1 - Attaching Handle Bracket to Chain  
Saw Handle  
You may have further questions about assembling, operating,  
or maintaining this product. If so, you can visit our Technical  
Service web site at www.desatech.com or contact our Tech-  
nical Service Department at 1-800-858-8501 (English Only),  
7:30 AM to 4:30 PM CST (M-F).You may also write to:  
DESA Specialty Products™  
P.O. Box 90004, Bowling Green, KY 42102-9004  
ATTN: Technical Service Specialty Products  
Handle Bracket  
When contacting DESA Specialty Products™, have ready  
Your Name  
Your Address  
Your Phone Number  
Pole Bracket  
• Model Number of Product  
• Date of Purchase (Include copy of receipt for written requests).  
Pole Assembly  
Philips Head  
Screw (4)  
Lock  
Washer (4)  
P.O. Box 90004  
Bowling Green, KY 42102-9004  
U.S.A.  
111006-02  
Figure 2 - Attaching Pole Saw Bracket to  
Handle Bracket  
Rev. A  
02/04  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Blower 3607969 User Manual
Crosley Radio VCR CF5494 User Manual
Cuisinart Beverage Dispenser SMS 201 User Manual
Delta Electronics Power Supply H48SR User Manual
Dynacord Music Mixer DRM 4000 User Manual
Earthquake Sound Speaker EQ6S8 User Manual
Electro Voice Portable Speaker Musicaster II User Manual
Extron electronic Switch DAV101CM User Manual
Fusion Marine Sanitation System MS WR600C User Manual
GE Monogram Ventilation Hood ZV755SPSS User Manual