Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
D-Link WBR-2310 User Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Product Overview
Product Overview
Package Contents
• D-Link WBR-2310 RangeBooster G™ Router
• Power Adapter
• Ethernet Cable
• Manual and Warranty on CD
Note: Using a power supply with a different voltage rating than the one included
with the WBR-2310 will cause damage and void the warranty for this product.
System Requirements
• Ethernet-based Cable or DSL Modem
• Computers withWindows®, Macintosh®, or Linux-based operating systems with an installed Ethernet
adapter
• Internet Explorer Version 6.0, Mozilla 1.7.12 (5.0), or Firefox 1.5 and above (for configuration)
D-Link WBR-2310 User Manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Product Overview
Introduction
The D-Link RangeBooster G™ WBR-2310 with enhanced 108 features the industry’s first default 108Mbps* “Dynamic
Mode”that allows clients to always operate at the highest possible speeds while automatically identifying and recognizing
other D-Link RangeBooster G™ products for highest performance capability and seamless access to the wireless
network in a homogenous environment.
Extensive performance and interoperability testing using standard based methods reveals a significant increase in
performance of the WBR-2310 over other 802.11g based competitors.
The D-LinkWBR-2310 wireless router employs five cutting-edge hardware-based compression technologies to achieve
a significant boost in performance within the 2.4GHz frequency range.
TheWBR-2310 features robust security to protect the wireless network from intruders, complying with the latest wireless
networking security protocols, including WEP encryption and Wi-Fi Protected Access (WPA) support for both 802.1x
and WPA-PSK. The WBR-2310 is also capable of supporting the government-grade AES encryption and upcoming
802.11i standards.
In addition to being the industry’s fastest wireless network solution, It includes management settings and policy-based
content filtering for advanced network management. Filters can be set based on MAC address, IP address, URL and/or
Domain Name.
* Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput
rate. Environmental conditions will adversely affect wireless signal range.
D-Link WBR-2310 User Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Product Overview
Features
• Faster Wireless Networking - The WBR-2310 provides up to 108Mbps* wireless connection with other
802.11g wireless clients. This capability allows users to participate in real-time activities online, such as
video streaming, online gaming, and real-time audio. The performance of this 802.11g wireless router
gives you the freedom of wireless networking at speeds 15x faster than 802.11b.
• Compatible with 802.11b and 802.11g Devices - The WBR-2310 is still fully compatible with the IEEE
802.11b standard, so it can connect with existing 802.11b PCI, USB and Cardbus adapters.
• Advanced Firewall Features - The Web-based user interface displays a number of advanced network
management features including:
• Content Filtering - Easily applied content filtering based on MAC Address, URL, and/or
Domain Name.
• Filter Scheduling - These filters can be scheduled to be active on certain days or for a
duration of hours or minutes.
• Secure Multiple/Concurrent Sessions - The WBR-2310 can pass through VPN sessions. It
supports multiple and concurrent IPSec and PPTP sessions, so users behind the WBR-2310
can securely access corporate networks.
• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the WBR-2310 lets
you control what information is accessible to those on the wireless network, whether from the Internet or
from your company’s server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput
rate. Environmental conditions will adversely affect wireless signal range.
D-Link WBR-2310 User Manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Product Overview
Hardware Overview
Connections
Pressing the Reset Button restores
the router to its original factory
default settings.
LAN Ports
Connect Ethernet devices such as
computers, switches, and hubs.
Receptor for the Power Adapter.
The Auto MDI/MDIX WAN
port is the connection for
the Ethernet cable to the
Cable or DSL modem.
D-Link WBR-2310 User Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Product Overview
Hardware Overview
LEDs
WLAN LED
A solid light indicates that the wireless
segment is ready. This LED blinks during
wireless data transmission.
WAN LED
A solid light indicates connection
on the WAN port. This LED blinks
during data transmission.
Power LED
A solid light indicates a proper
connection to the power supply.
Local Network LEDs
A solid light indicates a connection to an
Ethernet-enabled computer on ports 1-4.
This LED blinks during data transmission.
Status LED
A blinking light indicates that the
WBR-2310 is ready.
D-Link WBR-2310 User Manual
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 - Installation
Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the
router in an enclosed area such as a closet, cabinet, or in the attic or garage.
Before you Begin
Please configure the router with the computer that was last connected directly to your modem. Also, you can only use
the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off
your modem, disconnect the USB cable and connect an Ethernet cable to the WAN port on the router, and then turn
the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as
WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.
D-Link WBR-2310 User Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within
the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls,
ceilings, or other objects that the wireless signals must pass through, may limit the range.Typical ranges vary depending
on the types of materials and background RF (radio frequency) noise in your home or business.The key to maximizing
wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum
- each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices
so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet
(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
3. Building Materials make a difference.A solid metal door or aluminum studs may have a negative effect on
range. Try to position access points, wireless routers, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water
(fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that
generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and
home security systems), your wireless connection may degrade dramatically or drop completely. Make
sure your 2.4GHz phone base is as far away from your wireless devices as possible.The base transmits
a signal even if the phone in not in use.
D-Link WBR-2310 User Manual
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 - Installation
Connect to Cable/DSL/Satellite Modem
If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down
your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the
WAN port on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your
computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router
to boot.
7. Turn on your computer.
8. Verify the link lights on the router. The power light, WAN light, and the LAN light (the port that your computer is
plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable
connections are correct.
9. Skip to page 14 to configure your router.
D-Link WBR-2310 User Manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 - Installation
Connect to Another Router
If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have
to do the following before connecting the router to your network:
• Disable UPnP™
• Disable DHCP
• Change the LAN IP address to an available address on your network.The LAN ports on the router cannot
accept a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable.
Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the
Networking Basics section for more information.If you need to change the settings, write down your existing settings
before making any changes. In most cases, your computer should be set to receive an IP address automatically in
which case you will not have to do anything to your computer.
2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user
name to admin and leave the password box empty. Click OK to continue.
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings
to continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server server checkbox. Click Save
Settings to continue.
5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to
save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the
browser and change your computer’s IP settings back to the original values as in Step 1.
D-Link WBR-2310 User Manual
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 - Installation
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug
anything into the WAN port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers.To configure your wireless
network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and
Wireless Security sections for more information on setting up your wireless network.
D-Link WBR-2310 User Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link wireless router using the web-based configuration
utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser
such as Internet Explorer and enter the IP address of
the router (192.168.0.1).
Enter the user name (admin) and your password.Leave
the password blank by default.
If you get a Page Cannot be Displayed error, please
refer to the Troubleshooting section for assistance.
D-Link WBR-2310 User Manual
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Click Next to continue.
Create a new password and then click Next to continue.
Select your time zone from the drop-down menu and then click Next
to continue.
Select the type of Internet connection you use and then click Next
to continue.
D-Link WBR-2310 User Manual
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
If you selected Dynamic, you may need to enter the MAC address of the
computer that was last connected directly to your modem.If you are currently
using that computer, click Clone Your PC’s MAC Address and then click
Next to continue.
The Host Name is optional but may be required by some ISPs.The default
host name is the device name of the Router and may be changed.
If you selected PPPoE, enter your PPPoE username and password. Click
Next to continue.
Select Static if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
Note: Make sure to remove your PPPoE software from your computer.The
software is no longer needed and will not work through a router.
If you selected PPTP, enter your PPTP username and password.Click Next
to continue.
D-Link WBR-2310 User Manual
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
If you selected L2TP, enter your L2TP username and password. Click Next
to continue.
If you selected Static, enter your network settings supplied by your Internet
provider. Click Next to continue.
Click Connect to save your settings. Once the router is finished rebooting,
click Continue. Please allow 1-2 minutes to connect.
Close your browser window and reopen it to test your Internet connection.
It may take a few tries to initially connect to the Internet.
D-Link WBR-2310 User Manual
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Internet Setup
Dynamic (Cable)
Dynamic IP
Address:
Choose Dynamic IP Address to obtain IP Address
information automatically from your ISP. Select
this option if your ISP does not give you any IP
numbers to use. This option is commonly used
for Cable modem services.
Host Name:
The Host Name is optional but may be required by
some ISPs. The default host name is the device
name of the Router and may be changed.
MAC Address:
The default MAC Address is set to the WAN’s
physical interface MAC address on the Broadband
Router. It is not recommended that you change
the default MAC address unless required by your
ISP.
The default MAC address is set to the WAN’s
physical interface MAC address on the Broadband
Router. You can use the “Clone MAC Address”
button to copy the MAC address of the Ethernet
Card installed by your ISP and replace the WAN
MAC address with the MAC address of the router.
It is not recommended that you change the default
MAC address unless required by your ISP.
Clone MAC
Address:
DNS Addresses:
Enter the Primary DNS server IP address assigned by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the
default MTU.
D-Link WBR-2310 User Manual
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Internet Setup
PPPoE (DSL)
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide
you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE
software from your computer. The software is no longer needed and will not work through a router.
PPPoE:
Select Dynamic (most common) or Static. Select Static
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses.
User Name:
Password:
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password
in the next box.
Service Name:
IP Address:
Enter the ISP Service Name (optional).
Enter the IP address (Static PPPoE only).
DNS Addresses:
Enter the Primary and Secondary DNS Server Addresses
(Static PPPoE only).
Maximum Idle
Time:
Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
MTU:
MaximumTransmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1492
is the default MTU.
Connection Mode
Select:
Select either Always-on, Manual, or Connect-on demand.
D-Link WBR-2310 User Manual
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Internet Setup
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection.Your ISP will provide you with
a username and password. This option is typically used for DSL services.
PPTP: Select Dynamic (most common) or Static. Select Static if your ISP
assigned you the IP address, subnet mask, gateway, and DNS server
addresses.
IP Address: Enter the IP address (Static PPTP only).
Subnet Mask: Enter the Primary and Secondary DNS Server Addresses (Static
PPTP only).
Gateway: Enter the Gateway IP Address provided by your ISP.
DNS: The DNS server information will be supplied by your ISP (Internet
Service Provider.)
Server IP:
PPTP Account:
PPTP Password:
Enter the Server IP provided by your ISP (optional).
Enter your PPTP account name.
Enter your PPTP password and then retype the password in the next
box.
Maximum Idle
Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity.To disable this feature, enable
Auto-reconnect.
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the
default MTU.
Connect Mode:
Select either Always-on, Manual, or Connect-on demand.
D-Link WBR-2310 User Manual
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Internet Setup
L2TP
Choose L2TP (Layer 2Tunneling Protocol) if your ISP uses a L2TP connection.Your ISP will provide you with a username
and password. This option is typically used for DSL services.
L2TP:
Select Dynamic (most common) or Static. Select Static if your ISP
assigned you the IP address, subnet mask, gateway, and DNS server
addresses.
IP Address:
Enter the IP address (Static L2TP only).
Subnet Mask:
Enter the Primary and Secondary DNS Server Addresses (Static
L2TP only).
Gateway:
DNS:
Enter the Gateway IP Address provided by your ISP.
The DNS server information will be supplied by your ISP (Internet
Service Provider.)
Server IP:
L2TP Account:
L2TP Password:
Enter the Server IP provided by your ISP (optional).
Enter your L2TP account name.
Enter your L2TP password and then retype the password in the next
box.
Maximum Idle
Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity.To disable this feature, enable
Auto-reconnect.
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the
default MTU.
Connect Mode:
Select either Always-on, Manual, or Connect-on demand.
D-Link WBR-2310 User Manual
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Internet Setup
Big Pond
User Name:
Password:
Enter your Big Pond user name.
Enter your Big Pond password and then retype
the password in the next box.
Auth Server:
Login Server IP:
MAC Address:
Enter the IP address of the login server.
Enter the IP address of the login server.
The default MAC Address is set to the WAN’s
physical interface MAC address on the
Broadband Router. It is not recommended that
you change the default MAC address unless
required by your ISP.
The default MAC address is set to the WAN’s
physical interface MAC address on the
Broadband Router. You can use the “Clone
MAC Address” button to copy the MAC address
of the Ethernet Card installed by your ISP and
replace the WAN MAC address with the MAC
address of the router. It is not recommended
that you change the default MAC address unless
required by your ISP.
Clone MAC
Address:
D-Link WBR-2310 User Manual
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Internet Setup
Static (assigned by ISP)
Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,
gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP
form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address:
Subnet Mask:
ISP Gateway:
MAC Address:
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
The default MAC Address is set to the WAN’s physical
interface MAC address on the Broadband Router.It is not
recommended that you change the default MAC address
unless required by your ISP.
The default MAC address is set to the WAN’s physical
interface MAC address on the Broadband Router.You can
use the Clone MAC Address button to copy the MAC
address of the Ethernet Card installed by your ISP and
replace the WAN MAC address with the MAC address
of the router. It is not recommended that you change the
default MAC address unless required by your ISP.
Clone MAC
Address:
Primary DNS Enter the Primary DNS server IP address assigned by
Address: your ISP.
Enter the Secondary DNS server IP address assigned by your ISP.
Secondary DNS
Address:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is
the default MTU.
MTU:
D-Link WBR-2310 User Manual
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Wireless Settings
Check the box to enable the wireless function. If you do not want to use
wireless, uncheck the box to disable all the wireless functions.
Enable Wireless:
Wireless Network
Name:
Service Set Identifier (SSID) is the name of your wireless network.Create
a name using up to 32 characters. The SSID is case-sensitive.
Wireless Channel:
Indicates the channel setting for the WBR-2310. By default the channel
is set to 6. The Channel can be changed to fit the channel setting for
an existing wireless network or to customize the wireless network. The
Auto Channel Scan setting can be selected to allow the WBR-2310 to
choose the channel with the least amount of interference.
Super G Mode: Super G is a group of performance enhancement features that increase
end user application throughput in an 802.11g network. Super G is
backwards compatible to standard 802.11g devices.For top performance,
all wireless devices on the network should be Super G capable. Select
either Disabled, Super G without Turbo, Super G with Dynamic Turbo.
• Disabled - Standard 802.11g support, no enhanced capabilities.
• Super G without Turbo - Capable of Packet Bursting, FastFrames, Compression, but no Turbo mode.
• Super G with Dynamic Turbo - Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo.
This setting is backwards compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled
when all devices on the wireless network are Super G with Dynamic Turbo enabled.
Extended Range
Mode:
Extended Range Mode helps reduce dead spots by improving the reception algorithm, which allows your wireless clients to
associate with the WBR-2310 at farther distances. Check the box to enable it.
802.11g Only Enable this mode if your network is made up of purely 802.11g devices. If you have both 802.11b and 802.11g wireless
Mode: clients, uncheck the box.
Enable Hidden Check this option if you would not like the SSID of your wireless network to be broadcasted by the WBR-2310. If this option
Wireless: is checked, the SSID of the WBR-2310 will not be seen by Site Survey utilities so your wireless clients will have to know the
SSID of your WBR-2310 in order to connect to it.
D-Link WBR-2310 User Manual
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Network Settings
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
IP Address:
Enter the IP address of the router. The default
IP address is 192.168.0.1.
If you change the IP address, once you click
Apply, you will need to enter the new IP address
in your browser to get back into the configuration
utility.
Subnet Mask:
Enter the Subnet Mask.The default subnet mask
is 255.255.255.0.
Local Domain:
Enter the Domain name (Optional).
Enable DNS Relay:
Check the box to transfer the DNS server
information from your ISP to your computers. If
unchecked, your computers will use the router
for a DNS server.
Refer to the next page for DHCP information.
D-Link WBR-2310 User Manual
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. The WBR-2310 has a built-in DHCP server. The DHCP Server will
automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be
DHCP clients by setting theirTCP/IP settings to “Obtain an IP Address Automatically.”When you turn your computers on,
they will automatically load the proper TCP/IP settings provided by the WBR-2310.The DHCP Server will automatically
allocate an unused IP address from the IP address pool to the requesting computer.You must specify the starting and
ending address of the IP address pool.
Enable DHCP
Server:
Check the box to enable the DHCP server on your router.
Uncheck to disable this function.
DHCP IP Address
Range:
Enter the starting and ending IP addresses for the DHCP
server’s IP assignment.
Lease Time:
The length of time for the IP address lease.Enter the Lease
time in minutes.
DHCP
Reservation:
Also known as Static DHCP - allows the router to assign
the same IP address information to a specific computer
on the local network. The specified computer will get the
same DHCP IP address information every time it is turned
on. No other computer on the local network will receive the
specified static DHCP address except for the configured
computer.Static DHCP is very helpful when used for server
computers on the local network that are hosting applications
such as Web and FTP.
D-Link WBR-2310 User Manual
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Virtual Server
The WBR-2310 can be configured as a virtual server so that remote users accessing Web or FTP services via the
public IP address can be automatically redirected to local servers in the LAN (Local Area Network).
TheWBR-2310firewallfeaturefiltersoutunrecognized
packets to protect your LAN network so all computers
networked with the WBR-2310 are invisible to the
outside world. If you wish, you can make some of
the LAN computers accessible from the Internet by
enablingVirtual Server. Depending on the requested
service, theWBR-2310 redirects the external service
request to the appropriate server within the LAN
network.
The WBR-2310 is also capable of port-redirection
meaning incoming traffic to a particular port may
be redirected to a different port on the server
computer.
Each virtual service that is created will be listed at the
bottomofthescreenintheVirtualServersList.Thereare
pre-defined virtual services already in the table.You
may use them by enabling them and assigning the
server IP to use that particular virtual service.
D-Link WBR-2310 User Manual
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
This will allow you to open a single port. If you would like to open a range of ports, refer to page 30.
Virtual Server:
Name:
Check the box to enabled the rule.
Enter a name for the rule.
IP Address:
Enter the IP address of the computer on your
local network that you want to allow the incoming
service to.
Private Port/
Public Port:
Enter the port that you want to open next to
Private Port and Public Port. The private and
public ports are usually the same. The public
port is the port seen from the WAN side, and
the private port is the port being used by the
application on the computer within your local
network.
Protocol Type:
Schedule:
Select TCP, UDP, or ANY.
The schedule of time when the Virtual Server
Rule will be enabled.The schedule may be set
to Always, which will allow the particular service
to always be enabled.You can create your own
times in the Tools > Schedules section.
D-Link WBR-2310 User Manual
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Port Forwarding
This will allow you to open a single port or a range of ports.
Rule:
Name:
Check the box to enabled the rule.
Enter a name for the rule.
IP Address:
Enter the IP address of the computer on your
local network that you want to allow the incoming
service to.
Start Port/
End Port:
Enter the port or ports that you want to open.
If you want to open 1 port, enter the same port
in both boxes.
Protocol Type:
Schedule:
Select TCP, UDP, or ANY.
The schedule of time when the Port Forwarding
Rule will be enabled.The schedule may be set
to Always, which will allow the particular service
to always be enabled.You can create your own
times in the Tools > Schedules section.
D-Link WBR-2310 User Manual
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and
others. These applications have difficulties working through NAT (Network Address Translation). Special Applications
makes some of these applications work with the WBR-2310. If you need to run applications that require multiple
connections, specify the port normally associated with an application in the “Trigger Port” field, select the protocol type
as TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic.
TheWBR-2310 provides some predefined applications in the table on the bottom of the web page.Select the application
you want to use and enable it.
Name:
Enter a name for the rule.
Trigger Port:
This is the port used to trigger the application.It
can be either a single port or a range of ports.
Trigger Type:
Firewall Port:
Select the protocol of the trigger port (TCP,
UDP, or ANY).
This is the port number on the WAN side that
will be used to access the application.You may
define a single port or a range of ports. You
can use a comma to add multiple ports or port
ranges.
Port Type:
Schedule:
Select the protocol of the firewall port (TCP,
UDP, or ANY).
The schedule of time when the Application Rule
will be enabled. The schedule may be set to
Always, which will allow the particular service
to always be enabled.You can create your own
times in the Tools > Schedules section.
D-Link WBR-2310 User Manual
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Network Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network.You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.
Configure MAC
Filter:
SelectDisableMACfilters, allowMACaddresses
listed below, or deny MAC addresses listed
below.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
DHCP Client:
Select a DHCP client from the drop-down menu
and click the arrow to copy that MAC Address.
D-Link WBR-2310 User Manual
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Website Filters
URL and domain blocking are used to deny LAN computers from accessing specific web sites by the URL or domain.
A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the
blocked word, the site will not be accessible and the web page will not display. To use this feature, enter the text string
to be blocked and click Apply.The text to be blocked will appear in the list.To delete the text, just highlight it and click
Delete.
Configure Website
Select Turn Website Filtering OFF, Turn
Website Filtering ON and ALLOW computers
access to ONLY these sites, orTurnWebsite
Filtering ON and DENY computers access to
ONLY these sites.
Filter:
Website URL/
Domain:
Enter the keywords or URLs that you want to
block (or allow). Any URL with the keyword in it
will be blocked.
D-Link WBR-2310 User Manual
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Firewall Settings
This section will allow you to setup a DMZ host and to enable VPN passthrough.
If you have a client PC that cannot run Internet applications properly from behind the WBR-2310, then you can set
the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful
for gaming purposes. Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the
DMZ (Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last
resort.
Enable DMZ Host:
Check this box to enable DMZ.
IP Address:
Enter the IP address of the computer you would
like to open all ports to.
Enable PPTP
Passthrough:
Check this box to allow PPTPVPN traffic to pass
through the router to your VPN client.
Enable L2TP
Passthrough:
Check this box to allow L2TPVPN traffic to pass
through the router to your VPN client.
Enable IPSec
Passthrough:
Check this box to allow IPSecVPN traffic to pass
through the router to your VPN client.
D-Link WBR-2310 User Manual
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Advanced Wireless Settings
Tx Rate
Preamble
WMM Mode
Select the basic transfer rates based on the speed of
TX Rate:
wireless adapters on your wireless network. It is strongly
recommended to keep this setting to Auto.
Transmit Power:
Beacon Interval:
Set the transmit power of the antennas.
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value. 100 is
the default setting and is recommended.
RTS Threshold: This value should remain at its default setting of 2432.
If inconsistent data flow is a problem, only a minor
modification should be made.
The fragmentation threshold, which is specified in bytes,
Fragmentation:
determines whether packets will be fragmented.Packets exceeding the 2346 byte setting will be fragmented before transmission.
2346 is the default setting.
DTIM Interval:
Preamble Type:
(Delivery Traffic Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for
listening to broadcast and multicast messages.
Select Short or Long Preamble.The Preamble defines the length of the CRC block (Cyclic Redundancy Check is a common
technique for detecting data transmission errors) for communication between the wireless router and the roaming wireless
network adapters. Auto is the default setting. Note: High network traffic areas should use the shorter preamble type.
CTS Mode:
CTS (Clear To Send) is a function used to minimize collisions among wireless devices on a wireless local area network
(LAN). CTS will make sure the wireless network is clear before a wireless client attempts to send wireless data. Enabling
CTS will add overhead and may lower wireless through put. None: CTS is typically used in a pure 802.11g environment. If
CTS is set to “None” in a mixed mode environment populated by 802.11b clients, wireless collisions may occur frequently.
Always: CTS will always be used to make sure the wireless LAN is clear before sending data. Auto: CTS will monitor the
wireless network and automatically decide whether to implement CTS based on the amount of traffic and collisions that
occurs on the wireless network.
WMM Function:
WMM is QoS for your wireless network. Enable this option to improve the quality of video and voice applications for your
wireless clients.
D-Link WBR-2310 User Manual
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Advanced Network Settings
To use the Universal Plug and Play (UPnP™)
UPnP Settings:
WAN Ping:
feature click on Enabled. UPNP provides
compatibility with networking equipment, software
and peripherals.
Unchecking the box will not allow the WBR-2310
to respond to pings.Blocking the Ping may provide
some extra security from hackers. Check the box
to allow the WAN port to be “pinged”.
WAN select to
10/100 Mbps:
You may set the port speed of the WAN port to
10Mbps, 100Mbps, or auto. Some older cable
or DSL modems may require you to set the port
speed to 10Mbps.
Gaming Mode:
Gaming mode allows a form of pass-through for
certain Internet Games. If you are using Xbox,
Playstation2 or a PC, make sure you are using the
latest firmware and Gaming Mode is enabled. To
utilize Gaming Mode, click the box. If you are not
using a Gaming application, it is recommended
that you Disable Gaming Mode.
Multicast
streams:
Check the box to allow multicast traffic to pass
through the router from the Internet.
D-Link WBR-2310 User Manual
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Administrator Settings
This page will allow you to change the Administrator and User passwords.You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser.The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.
Enter a new Login Name for the Administrator
account.
Administrator
Login Name:
Enter a new password for the Administrator Login
Name. The administrator can make changes to
the settings.
Administrator
Password:
Enter a new Login Name for the User account.
User Login Name:
User Password:
Enter the new password for the User login.If you
login as the User, you can only see the settings,
but cannot change them.
Remote management allows the WBR-2310
to be configured from the Internet by a web
browser. A username and password is still
required to access the Web-Management
interface. In general, only a member of your
network can browse the built-in web pages to
perform Administrator tasks.This feature enables
you to perform Administrator tasks from the
remote (Internet) host.
Remote
Management:
IP Address:
Port:
The Internet IP address of the computer that has
access to the Broadband Router. If you input an
asterisk (*) into this field, then any computer will
be able to access the Router. Putting an asterisk (*) into this field would present a security risk and is not recommended.
The port number used to access the WBR-2310.
Management interface.
D-Link WBR-2310 User Manual
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Time Settings
Select the Time Zone from the drop-down
menu.
Time Zone:
To select Daylight Saving time manually, select
enabled or disabled, and enter a start date and
an end date for daylight saving time.
Daylight Saving:
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. This field is optional.
Automatic:
Manual: To manually input the time, enter the values
in these fields for the Year, Month, Day, Hour,
Minute, and Second.Click SetTime.You can also
click Copy Your Computer’s Time Settings.
D-Link WBR-2310 User Manual
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
System Settings
Use this option to save the current router
Save Settings to
Local Hard Drive:
configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Use this option to load previously saved
router configuration settings. First, use the
Browse control to find a previously save file
of configuration settings. Then, click the Load
button to transfer those settings to the router.
Load Settings
from Local Hard
Drive:
This option will restore all configuration settings
back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created.If
you want to save the current router configuration
settings, use the Save button above.
Restore to Factory
Default Settings:
Click Enabled to use the JumpStart function.
If your wireless router uses JumpStart, please
check the adapter for instructions.
JumpStart
function:
Use this option to reset the JumpStart feature.
Reset JumpStart:
D-Link WBR-2310 User Manual
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Update Firmware
You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of
the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support
site for firmware updates at http://support.dlink.com.You can download firmware upgrades to your hard drive from the
D-Link support site.
Click on the link in this screen to find out if there
is an updated firmware;if so, download the new
firmware to your hard drive.
Firmware
Upgrade:
After you have downloaded the new firmware,
click Browse in this window to locate the
firmware update on your hard drive. Click Save
Settings to complete the firmware upgrade.
Browse:
D-Link WBR-2310 User Manual
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
DDNS
Dynamic Domain Name System is a method of
keeping a domain name linked to a changing IP
Address. Check the box to enable DDNS.
DDNS:
Server Address:
Host Name:
Choose your DDNS provider from the drop
down menu.
Enter the Host Name that you registered with
your DDNS service provider.
Username:
Password:
Enter the Username for your DDNS account.
Enter the Password for your DDNS account.
D-Link WBR-2310 User Manual
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
System Test
VCT is an advanced feature that integrates a LAN cable
Virtual Cable
Tester (VCT) Info:
tester on every Ethernet port on the router. Through the
graphical user interface (GUI), VCT can be used to remotely
diagnose and report cable faults such as opens, shorts,
swaps, and impedance mismatch. This feature significantly
reduces service calls and returns by allowing users to easily
troubleshoot their cable connections.
Ping Test:
The Ping Test is used to send Ping packets to test if a
computer is on the Internet. Enter the IP Address that you
wish to Ping, and click Ping.
D-Link WBR-2310 User Manual
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Schedules
Enter a name for your new schedule.
Name:
Days:
Select a day, a range of days, or All Week to
include every day.
Time:
Check All Day - 24hrs or enter a start and end
time for your schedule.
D-Link WBR-2310 User Manual
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Log Settings
The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted,
the logs are automatically cleared.
SMTP Server/IP
Address:
The address of the SMTP server that will be
used to send the logs.
Email Address:
The email address to which the logs will be sent.
Click on Send Mail Now to send the email.
Save Log File to
Local Hard Drive:
Click to save the log to your hard drive.
Log Type:
Check the type of alert you want logged.
D-Link WBR-2310 User Manual
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Device Information
This page displays the current information for the WBR-2310. It will display the LAN, WAN, and Wireless information.
If your WAN connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.
Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your WAN connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
Displays the MAC address and the private
(local) IP settings for the router.
LAN:
Displays the MAC address and the public IP
settings for the router.
WAN:
Displays whether or not the status of the
JumpStart feature is enabled or disabled.
Wireless
JumpStart:
Wireless: Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
D-Link WBR-2310 User Manual
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - Configuration
Stats
The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the WBR-2310
on both the WAN and the LAN ports. The traffic counter will reset if the device is rebooted.
Wireless
The wireless client table displays a list of current connected wireless clients. This table also displays the connection
time and MAC address of the connected wireless client.
D-Link WBR-2310 User Manual
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - Security
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders. The
WBR-2310 offers the following types of security:
• WPA2 (Wi-Fi Protected Access 2)
• WPA (Wi-Fi Protected Access)
• WEP (Wired Equivalent Privacy)
• WPA2-PSK (Pre-Shared Key)
• WPA-PSK (Pre-Shared Key)
What is WEP?
WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802.11 standard and uses the RC4 encryption
algorithm.WEP provides security by encrypting data over your wireless network so that it is protected as it is transmitted
from one wireless device to another.
To gain access to a WEP network, you must know the key.The key is a string of characters that you create.When using
WEP, you must determine the level of encryption.The type of encryption determines the key length. 128-bit encryption
requires a longer key than 64-bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using
characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange – alphanumeric characters) format.
ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX
for use over the network. Four keys can be defined so that you can change keys easily.
D-Link WBR-2310 User Manual
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - Security
What is WPA?
WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired
Equivalent Privacy).
The 2 major improvements over WEP:
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys
using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t
been tampered with.WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead
of TKIP.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol
(EAP). WEP regulates access to a wireless network based on a computer’s hardware-specific MAC
address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key
encryption system to ensure that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection.The key is an alpha-numeric
password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must
be the exact same key entered on your wireless router or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a
more secure public key encryption system to ensure that only authorized network users can access the network.
D-Link WBR-2310 User Manual
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - Security
Configure WEP
It is recommended to enable encryption on your wireless router before your wireless network adapters.Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).
Click on Wireless Settings on the left side.
2. Next to Security Mode, select Enable WEP Security.
3. Next to Authentication, select Shared Key.
4. Select either 64-bit or 128-bit encryption from the drop-down
menu next to WEP Encryption.
5. Next to Key Type, select either Hex or ASCII.
Hex (recommended) - Letters A-F and numbers 0-9 are valid.
ASCII - All numbers and letters are valid.
6. Next to Key 1, enter a WEP key that you create. Make sure you
enter this key exactly on all your wireless devices.You may enter
up to 4 different keys.
7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose
connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router.
D-Link WBR-2310 User Manual
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - Security
Configure WPA-PSK
It is recommended to enable encryption on your wireless router before your wireless network adapters.Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).
Click on Wireless Settings on the left side.
2. Next to Security Mode, select Enable WPA-Personal Security
or Enable WPA2-Personal Security.
3. Next to Cipher Mode, select TKIP, AES, or Auto.
4. Next to PSK/EAP, select PSK.
5. Next to Passphrase, enter a key (passphrase). The key is an
alpha-numeric password between 8 and 63 characters long.The password can include symbols (!?*&_) and spaces.
Make sure you enter this key exactly the same on all other wireless clients.
6. Enter the passphrase again next to Confirmed Passphrase.
7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose
connectivity until you enable WPA-PSK (or WPA2-PSK) on your adapter and enter the same passphrase as you did
on the router.
D-Link WBR-2310 User Manual
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - Security
Configure WPA (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters.Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).
Click on Wireless Settings on the left side.
2. Next to Security Mode, select Enable WPA-Personal Security
or Enable WPA2-Personal Security.
3. Next to Cipher Mode, select TKIP, AES, or Auto.
4. Next to PSK/EAP, select EAP.
5. Next to RADIUS Server 1 enter the IP Address of your RADIUS
server.
6. Next to Port, enter the port you are using with your RADIUS
server. 1812 is the default port.
7. Next to Shared Secret, enter the security key.
8. If you have a secondary RADIUS server, enter its IP address, port, and secret key.
9. Click Apply Settings to save your settings.
D-Link WBR-2310 User Manual
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows® XP
Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for
Service Pack 2 users. If you are using another company’s utility or Windows® 2000, please refer to the user manual
of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option
similar to the Windows® XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available
Wireless Networks.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
If you get a good signal but cannot access the Internet, check you
TCP/IPsettingsforyourwirelessadapter.RefertotheNetworking
Basics section in this manual for more information.
D-Link WBR-2310 User Manual
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - Connecting to a Wireless Network
Configure WEP
It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If
you are joining an existing network, you will need to know the WEP key being used.
1. Open the Windows® XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). Select View Available
Wireless Networks.
2. Highlight the wireless network (SSID) you would like to
connect to and click Connect.
D-Link WBR-2310 User Manual
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - Connecting to a Wireless Network
3. The Wireless Network Connection box will appear.Enter the same
WEP key that is on your router and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WEP settings are correct. The
WEP key must be exactly the same as on the wireless router.
D-Link WBR-2310 User Manual
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - Connecting to a Wireless Network
Configure WPA-PSK
It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If
you are joining an existing network, you will need to know the WEP key being used.
1. Open the Windows® XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). Select View Available
Wireless Networks.
2. Highlight the wireless network (SSID) you would like to
connect to and click Connect.
D-Link WBR-2310 User Manual
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - Connecting to a Wireless Network
3. The Wireless Network Connection box will appear. Enter the
WPA-PSK passphrase and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WPA-PSK settings are correct.
The WPA-PSK passphrase must be exactly the same as on the
wireless router.
D-Link WBR-2310 User Manual
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 6 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the WBR-2310.
Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If
you have a different operating system, the screenshots on your computer will look similar to the following examples.)
1. Why can’t I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on
the Internet or have to be connected to the Internet.The device has the utility built-in to a ROM chip in the device itself.
Your computer must be on the same IP subnet to connect to the web-based utility.
• Make sure you have an updated Java-enabled web browser. We recommend the following:
• Internet Explorer 6.0 or higher
• Netscape 8 or higher
• Mozilla 1.7.12 (5.0) or higher
• Opera 8.5 or higher
• Safari 1.2 or higher (with Java 1.3.1 or higher)
• Camino 0.8.4 or higher
• Firefox 1.5 or higher
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using
a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may
not be on.
• Disable any internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice,
Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the
help files included with your firewall software for more information on disabling or configuring it.
D-Link WBR-2310 User Manual
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 6 - Troubleshooting
• Configure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab,
click the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings
button. Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three
times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address
bar. This should open the login page for your the web management.
• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait
about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different
computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back
to the factory defaults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a
paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process.
Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is
admin and leave the password box empty.
D-Link WBR-2310 User Manual
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 6 - Troubleshooting
3. Why can’t I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and
Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).
Note: AOL DSL+ users must use MTU of 1400.
To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could
be another computer, or a URL.
• Click on Start and then click Run.
• Windows® 95, 98, and Me users type in command (Windows® NT, 2000, and XP users type in cmd) and
press Enter (or click OK).
• Once the window opens, you’ll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472
D-Link WBR-2310 User Manual
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 6 - Troubleshooting
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a
fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example,
lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network
we’re working with (1452+28=1480).
Once you find your MTU, you can now configure your router with the proper MTU size.
To change the MTU rate on your router follow the steps below:
• Open your browser, enter the IP address of your router (192.168.0.1) and click OK.
• Enter your username (admin) and password (blank by default). Click OK to enter the web configuration
page for the device.
• Click on Setup and then click Manual Configure.
• To change the MTU enter the number in the MTU field and click Save Settings to save your settings.
• Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in
increments of ten.
D-Link WBR-2310 User Manual
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A - Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless
connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard,
the D-Link wireless family of products will allow you to securely access the data you want, when and where you want
it.You will be able to enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals
instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such
as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and
communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven
to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop
and desktop systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in
order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device
used to provide this link.
D-Link WBR-2310 User Manual
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A - Wireless Basics
What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi
uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or
office network.
Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products.
D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your
network.
How does wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point
B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless
network range area to be able to connect your computer. There are two different types of wireless networks Wireless
Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network.The access
point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an
indoor access point as seen in the picture, the signal can travel up to 300 feet.With an outdoor access point the signal
can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school
campuses, airports, golf courses, and many other outdoor venues.
D-Link WBR-2310 User Manual
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A - Wireless Basics
Wireless Personal Area Network (WPAN)
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range
up to 30 feet away.
Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use
nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops,
speakers, and other devices that operate on batteries.
Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office,
business, D-Link has a wireless solution for it.
Home
• Gives everyone at home broadband access
• Surf the web, check email, instant message, and etc
• Gets rid of the cables around the house
• Simple and easy to use
Small Office and Home Office
• Stay on top of everything at home as you would at office
• Remotely access your office network from home
• Share Internet connection and printer with multiple computers
• No need to dedicate office space
D-Link WBR-2310 User Manual
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A - Wireless Basics
Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s
becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless
connection in public places is usually called “hotspots”.
Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote
locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to
start.That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless
network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your router or Access Point
Make sure you place the router/access point in a centralized location within your network for the best performance.Try
to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home.
If you have a two-story home, you may need a repeater to boost the signal to extend the range.
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the
router/access point.This would significantly reduce any interference that the appliances might cause since they operate
on same frequency.
D-Link WBR-2310 User Manual
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A - Wireless Basics
Security
Don’t let you next-door neighbors or intruders connect to your wireless network.Secure your wireless network by turning
on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up.
Wireless Modes
There are basically two modes of networking:
• Infrastructure – All wireless clients will connect to an access point or wireless router.
• Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network
adapters on each computer, such as two or more WBR-2310 wireless network Cardbus adapters.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect
to the wireless router or access point.
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in
Ad-Hoc mode to communicate.
D-Link WBR-2310 User Manual
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a
DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK.
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and
the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter
installation, security settings, and the settings
on your router. Some firewall software programs
may block a DHCP request on newly installed
adapters.
If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee
or administrator to verify their wireless network settings.
D-Link WBR-2310 User Manual
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
below:
Step 1
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN
IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the number
you choose is not in use on the network. Set Default Gateway the same as the LAN
IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1).The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link WBR-2310 User Manual
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C - Technical Specifications
Technical Specifications
Standards
• IEEE 802.11g
• IEEE 802.11b
• IEEE 802.3
• IEEE 802.3u
Media Access Control
CSMA/CA with ACK
Frequency Range
2.4GHz to 2.462GHz
VPN Pass Through / Multi-Sessions
• PPTP
• L2TP
• IPSec
Wireless Signal Range*
• Indoors: Up to 328 feet (100 meters)
• Outdoors: Up to 1,312 feet (400 meters)
Device Management
Modulation Technology
• Web-Based – Internet Explorer v6 or
later; Netscape Navigator v6 or later; or
other Java- enabled browsers.
• Orthogonal Frequency Division Multiplexing (OFDM)
• Complementary Code Keying (CCK)
Receiver Sensitivity
• DHCP Server and Client
• 54Mbps OFDM, 10% PER,-68dBm)
• 48Mbps OFDM, 10% PER,-68dBm)
• 36Mbps OFDM, 10% PER,-75dBm)
• 24Mbps OFDM, 10% PER,-79dBm)
• 18Mbps OFDM, 10% PER,-82dBm)
• 12Mbps OFDM, 10% PER,-84dBm)
• 11Mbps CCK, 8% PER,-82dBm)
• 9Mbps OFDM, 10% PER,-87dBm)
• 6Mbps OFDM, 10% PER,-88dBm)
• 5.5Mbps CCK, 8% PER,-85dBm)
• 2Mbps QPSK, 8% PER,-86dBm)
• 1Mbps BPSK, 8% PER,-89dBm)
Wireless Signal Rates*
• 108Mbps
• 54Mbps
• 36Mbps
• 18Mbps
• 11Mbps
• 6Mbps
• 48Mbps
• 24Mbps
• 12Mbps
• 9Mbps
• 5.5Mbps
• 1Mbps
• 2Mbps
Security
• WPA - Wi-Fi Protected Access (TKIP, MIC,
IV Expansion, Shared Key Authentication)
• 802.1x
Transmitter Output Power
15dBm ± 2dB
• 64/128-bit WEP
D-Link WBR-2310 User Manual
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C - Technical Specifications
External Antenna Type
Single detachable reverse SMA
LEDs
• Power
• WLAN
• WAN
• LAN (10/100)
Operating Temperature
32°F to 131°F ( 0°C to 55°C)
Humidity
95% maximum (non-condensing)
Power Input
Ext. Power Supply DC 5V, 2.4A
Safety & Emissions
• FCC
Dimensions
• L = 7.5 inches (190.5mm)
• W = 4.6 inches (116.84mm)
• H = 1.375inches (35mm)
Weight
~10.3 Ounces
Warranty
3 Year
D-Link WBR-2310 User Manual
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D - Contacting Technical Support
Contacting Technical Support
D-Link provides free technical support for customers within the United States and within Canada for the duration of
the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our
web site or by phone.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. WBR-2310)
• Hardware Revision (located on the label on the bottom of the router (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the router).
You can find software updates and user documentation on the D-Link website as well as frequently asked questions
and answers to technical issues.
For customers within the United States:
For customers within Canada:
Phone Support:
(877) 453-5465
Phone Support:
(800) 361-5265
24 hours a day, seven days a week.
Monday to Friday 7:30am to 9:00pm EST
Internet Support:
Internet Support:
email:[email protected]
D-Link WBR-2310 User Manual
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E - Warranty
Warranty
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:
• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and
• Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions
or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Limited Warranty:
D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in
workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below
(“Warranty Period”), except as otherwise stated herein.
• Hardware (excluding power supplies and fans): One (1) year
• Power supplies and fans: One (1) year
• Spare parts and spare kits: Ninety (90) days
The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-
Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the
actual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office.The replacement
hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part
thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects
to the defective Hardware. Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety
(90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if
D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the
defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware.All Hardware or part thereof that is replaced
by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund.
D-Link WBR-2310 User Manual
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E - Warranty
Limited Software Warranty:
D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications
for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety
(90) days (“SoftwareWarranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated
in its documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the
Software will be free of physical defects.The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under
this LimitedWarranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially
conforms to D-Link’s functional specifications for the Software or to refund the portion of the actual purchase price paid that is attributable
to the Software. Except as otherwise agreed by DLink in writing, the replacement Software is provided only to the original licensee, and
is subject to the terms and conditions of the license granted by D-Link for the Software. Replacement Software will be warranted for the
remainder of the original Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable
of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by
the original licensee for the non-conforming Software will be refunded by D-Link;provided that the non-conforming Software (and all copies
thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates.
Non-Applicability of Warranty:
The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover
any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the
sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold
“As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything
stated herein to the contrary.
Submitting A Claim:
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired
and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software
nonconformance in sufficient detail to allow DLink to confirm the same, along with proof of purchase of the product (such
as a copy of the dated purchase invoice for the product) if the product is not registered.
• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist
the customer in resolving any suspected defects with the product.If the product is considered defective, the customer must
obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID
D-Link WBR-2310 User Manual
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E - Warranty
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping
package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside
of the package. Do not include any manuals or accessories in the shipping package. DLink will only replace the defective
portion of the product and will not ship back any accessories.
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products
sent COD will either be rejected by D-Link or become the property of D-Link.Products shall be fully insured by the customer
and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible
for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via
UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an
address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon
request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not
packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from
the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges
for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by
D-Link not to be defective or non-conforming.
What Is Not Covered:
The Limited Warranty provided herein by D-Link does not cover:
Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the
model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for
repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage
that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other
products or services provided by anyone other than D-Link;and Products that have been purchased from inventory clearance or liquidation
sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.
While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized
D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.
Disclaimer of Other Warranties:
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY
OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT.
D-Link WBR-2310 User Manual
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E - Warranty
IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF
SUCH IMPLIEDWARRANTY SHALL BE LIMITEDTOTHE DURATION OFTHE APPLICABLEWARRANTY PERIOD SET FORTH ABOVE.
EXCEPT AS EXPRESSLY COVERED UNDERTHE LIMITEDWARRANTY PROVIDED HEREIN,THE ENTIRE RISK ASTOTHE QUALITY,
SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
Limitation of Liability:
TOTHE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY
OR OTHER LEGAL OR EQUITABLETHEORY FOR ANY LOSS OF USE OFTHE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY
CHARACTER,WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITEDTO, DAMAGES FOR
LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF
OTHER EQUIPMENT OR COMPUTER PROGRAMSTOWHICH D-LINK’S PRODUCT IS CONNECTEDWITH, LOSS OF INFORMATION
OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNEDTO D-LINK FOR WARRANTY SERVICE)
RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.THE SOLE REMEDY
FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR
NONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE
PRICE OF THE PRODUCT COVERED BY THE WARRANTY.THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES
ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.
Governing Law:
This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental
or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply.
This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state.
Trademarks:
D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective
owners.
Copyright Statement:
No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make
any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as
stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.
Copyright 2005 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.
D-Link WBR-2310 User Manual
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E - Warranty
CE Mark Warning:
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required
to take adequate measures.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-
Link office.
D-Link WBR-2310 User Manual
77
Download from Www.Somanuals.com. All Manuals Search And Download.
|
