Cypress Computer Hardware CY7C1007B User Manual

07B  
CY7C107B  
CY7C1007B  
1M x 1 Static RAM  
Writing to the devices is accomplished by taking Chip Enable  
(CE) and Write Enable (WE) inputs LOW. Data on the input pin  
(DIN) is written into the memory location specified on the ad-  
dress pins (A0 through A19).  
Features  
• High speed  
— tAA = 12 ns  
Reading from the devices is accomplished by taking Chip En-  
able (CE) LOW while Write Enable (WE) remains HIGH. Under  
these conditions, the contents of the memory location speci-  
• CMOS for optimum speed/power  
• Automatic power-down when deselected  
• TTL-compatible inputs and outputs  
fied by the address pins will appear on the data output (DOUT  
)
pin.  
Functional Description  
The output pin (DOUT) is placed in a high-impedance state  
when the device is deselected (CE HIGH) or during a write  
operation (CE and WE LOW).  
The CY7C107B and CY7C1007B are high-performance  
CMOS static RAMs organized as 1,048,576 words by 1 bit.  
Easy memory expansion is provided by an active LOW Chip  
Enable (CE) and three-state drivers. These devices have an  
automatic power-down feature that reduces power consump-  
tion by more than 65% when deselected.  
The CY7C107B is available in a standard 400-mil-wide SOJ;  
the CY7C1007B is available in a standard 300-mil-wide SOJ.  
Logic Block Diagram  
Pin Configuration  
SOJ  
Top View  
D
IN  
28  
27  
26  
1
2
3
4
5
6
A
A
A
A
A
A
V
CC  
10  
11  
12  
13  
14  
15  
A
9
A
8
25  
24  
A
7
INPUT BUFFER  
A
6
A
A0  
23  
22  
5
A1  
A2  
A3  
A4  
A5  
A6  
A7  
A8  
7
8
9
10  
11  
12  
13  
NC  
A
4
21  
20  
19  
18  
17  
A
17  
NC  
16  
A
A
3
A
19  
A
2
18  
512x2048  
ARRAY  
A
A
1
D
OUT  
A
0
D
OUT  
WE  
GND  
16  
15  
D
IN  
14  
CE  
107B-2  
POWER  
DOWN  
COLUMN  
DECODER  
CE  
WE  
107B-1  
Selection Guide  
7C107B-12  
7C1007B-12  
7C107B-15  
7C1007B-15  
7C107B-20  
7C1007B-20  
7C107B-25  
7C1007B-25  
7C107B-35  
7C1007B-35  
Maximum Access Time (ns)  
12  
90  
15  
80  
20  
75  
25  
70  
35  
60  
Maximum Operating  
Current (mA)  
Maximum CMOS Standby  
Current SB2 (mA)  
2
2
2
2
2
Cypress Semiconductor Corporation  
3901 North First Street  
San Jose  
CA 95134  
408-943-2600  
Document #: 38-05030 Rev. **  
Revised September 7, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CY7C107B  
CY7C1007B  
Electrical Characteristics Over the Operating Range (continued)  
7C107B-25  
7C1007B-25  
7C107B-35  
7C1007B-35  
Parameter  
Description  
Output HIGH  
Test Conditions  
Min.  
Max.  
Min.  
Max.  
Unit  
VOH  
VCC = Min., IOH = 4.0 mA  
2.4  
2.4  
V
Voltage  
VOL  
VIH  
VIL  
IIX  
Output LOW Voltage  
Input HIGH Voltage  
Input LOW Voltage[1]  
Input Load Current  
VCC = Min., IOL = 8.0 mA  
0.4  
VCC + 0.3  
0.8  
0.4  
VCC + 0.3  
0.8  
V
V
2.2  
0.3  
1  
2.2  
0.3  
1  
V
GND < VI < VCC  
+1  
+1  
µA  
µA  
IOZ  
Output Leakage  
Current  
GND < VI < VCC  
,
5  
+5  
5  
+5  
Output Disabled  
IOS  
ICC  
Output Short  
VCC = Max., VOUT = GND  
300  
300  
mA  
mA  
Circuit Current[3]  
VCC Operating  
Supply Current  
VCC = Max.,  
IOUT = 0 mA,  
f = fMAX = 1/tRC  
70  
60  
ISB1  
Automatic CE  
Power-Down  
CurrentTTL Inputs  
Max. VCC, CE > VIH,  
VIN >VIH or VIN < VIL,  
f = f MAX  
20  
2
20  
2
mA  
mA  
ISB2  
Automatic CE  
Max. VCC,  
Power-Down  
CurrentCMOS Inputs  
CE > VCC 0.3V,  
VIN > VCC 0.3V or  
VIN < 0.3V, f = 0  
Capacitance[4]  
Parameter  
CIN: Addresses  
CIN: Controls  
Description  
Test Conditions  
Max.  
7
Unit  
pF  
Input Capacitance  
TA = 25°C, f = 1 MHz,  
VCC = 5.0V  
10  
pF  
COUT  
Output Capacitance  
10  
pF  
Note:  
4. Tested initially and after any design or process changes that may affect these parameters.  
Document #: 38-05030 Rev. **  
Page 3 of 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CY7C107B  
CY7C1007B  
AC Test Loads and Waveforms  
R1 480Ω  
R1 480Ω  
5V  
5V  
OUTPUT  
ALL INPUT PULSES  
3.0V  
GND  
OUTPUT  
90%  
10%  
90%  
10%  
ns  
R2  
255Ω  
R2  
255Ω  
30 pF  
5 pF  
3 ns  
3  
INCLUDING  
JIG AND  
SCOPE  
INCLUDING  
JIG AND  
SCOPE  
107-4  
(a)  
(b)  
107-3  
Equivalentto:  
THÉVENIN EQUIVALENT  
167Ω  
OUTPUT  
1.73V  
Switching Characteristics[5] Over the Operating Range  
7C107B-12  
7C107B-15  
7C107B-20  
7C107B-25  
7C107B-35  
7C1007B-12 7C1007B-15 7C1007B-20 7C1007B-25 7C1007B-35  
Parameter  
Description  
Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Unit  
READ CYCLE  
tRC  
Read Cycle Time  
12  
3
15  
3
20  
3
25  
3
35  
3
ns  
ns  
ns  
tAA  
Address to Data Valid  
12  
15  
20  
25  
35  
tOHA  
Data Hold from Address  
Change  
tACE  
tLZCE  
tHZCE  
tPU  
CE LOW to Data Valid  
CE LOW to Low Z[6]  
CE HIGH to High Z[6, 7]  
CE LOW to Power-Up  
CE HIGH to Power-Down  
12  
6
15  
7
20  
8
25  
10  
25  
35  
10  
35  
ns  
ns  
ns  
ns  
ns  
3
0
3
0
3
0
3
0
3
0
tPD  
12  
15  
20  
WRITE CYCLE[8]  
tWC  
tSCE  
tAW  
Write Cycle Time  
12  
10  
10  
15  
12  
12  
20  
15  
15  
25  
20  
20  
35  
25  
25  
ns  
ns  
ns  
CE LOW to Write End  
Address Set-Up to Write  
End  
tHA  
tSA  
Address Hold from Write  
End  
0
0
0
0
0
0
0
0
0
0
ns  
ns  
Address Set-Up to Write  
Start  
tPWE  
tSD  
WE Pulse Width  
10  
7
12  
8
15  
10  
0
20  
15  
0
25  
20  
0
ns  
ns  
ns  
ns  
ns  
Data Set-Up to Write End  
Data Hold from Write End  
WE HIGH to Low Z[6]  
WE LOW to High Z[6, 7]  
tHD  
0
0
tLZWE  
3
3
3
3
3
tHZWE  
6
7
8
10  
10  
Notes:  
5. Test conditions assume signal transition time of 3 ns or less, timing reference levels of 1.5V, input pulse levels of 0 to 3.0V, and output loading of the specified  
IOL/IOH and 30-pF load capacitance.  
6. At any given temperature and voltage condition, tHZCE is less than tLZCE and tHZWE is less than tLZWE for any given device.  
7. tHZCE and tHZWE are specified with a load capacitance of 5 pF as in part (b) of AC Test Loads. Transition is measured ±500 mV from steady-state voltage.  
8. The internal write time of the memory is defined by the overlap of CE LOW and WE LOW. CE and WE must be LOW to initiate a write, and the transition of any of these  
signals can terminate the write. The input data set-up and hold timing should be referenced to the leading edge of the signal that terminates the write.  
Document #: 38-05030 Rev. **  
Page 4 of 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CY7C107B  
CY7C1007B  
Switching Waveforms  
Read Cycle No. 1[10, 11]  
t
RC  
ADDRESS  
t
AA  
t
OHA  
PREVIOUS DATA VALID  
DATA VALID  
DATA OUT  
107-6  
Read Cycle No. 2[11, 12]  
ADDRESS  
CE  
t
RC  
t
ACE  
t
t
HZCE  
LZCE  
HIGH  
IMPEDANCE  
HIGH IMPEDANCE  
DATA OUT  
DATA VALID  
t
PD  
t
PU  
V
CC  
I
CC  
SUPPLY  
CURRENT  
50%  
50%  
I
SB  
107-7  
Write Cycle No. 1 (CE Controlled)[13]  
t
WC  
ADDRESS  
t
SA  
t
SCE  
CE  
t
t
HA  
AW  
t
PWE  
WE  
t
t
HD  
SD  
DATA IN  
DATA VALID  
HIGH IMPEDANCE  
DATA OUT  
107-8  
Notes:  
9. No input may exceed VCC + 0.5V.  
10. Device is continuously selected, CE = VIL.  
11. WE is HIGH for read cycle.  
12. Address valid prior to or coincident with CE transition LOW.  
Document #: 38-05030 Rev. **  
Page 5 of 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CY7C107B  
CY7C1007B  
Switching Waveforms (continued)  
Write Cycle No. 2 (WE Controlled)[13]  
t
WC  
ADDRESS  
CE  
t
SCE  
t
t
HA  
AW  
t
SA  
t
PWE  
WE  
t
t
HD  
SD  
DATA IN  
DATA VALID  
t
t
LZWE  
HZWE  
HIGH IMPEDANCE  
DATA OUT  
DATA UNDEFINED  
107-9  
Note:  
13. If CE goes HIGH simultaneously with WE going HIGH, the output remains in a high-impedance state.  
Document #: 38-05030 Rev. **  
Page 6 of 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CY7C107B  
CY7C1007B  
Truth Table  
CE  
H
WE  
DOUT  
Mode  
Power-Down  
Power  
X
H
L
High Z  
Standby (ISB  
Active (ICC  
Active (ICC  
)
L
Data Out  
High Z  
Read  
Write  
)
L
)
Ordering Information  
Speed  
Package  
Name  
Operating  
Range  
(ns)  
Ordering Code  
CY7C107B-12VC  
Package Type  
12  
V28  
V28  
V28  
V28  
V28  
V28  
V28  
V28  
V28  
V28  
28-Lead (400-Mil) Molded SOJ  
28-Lead (300-Mil) Molded SOJ  
28-Lead (400-Mil) Molded SOJ  
28-Lead (300-Mil) Molded SOJ  
28-Lead (400-Mil) Molded SOJ  
28-Lead (300-Mil) Molded SOJ  
28-Lead (400-Mil) Molded SOJ  
28-Lead (300-Mil) Molded SOJ  
28-Lead (400-Mil) Molded SOJ  
28-Lead (300-Mil) Molded SOJ  
Commercial  
CY7C1007B-12VC  
CY7C107B-15VC  
CY7C1007B-15VC  
CY7C107B-15VI  
CY7C1007B-15VI  
CY7C107B-20VC  
CY7C1007B-20VC  
CY7C107B-25VC  
CY7C1007B-25VC  
Commercial  
Commercial  
Commercial  
Industrial  
15  
15  
20  
25  
Industrial  
Commercial  
Commercial  
Commercial  
Commercial  
Contact factory for Lversion availability.  
Package Diagrams  
28-Lead (400-Mil) Molded SOJ V28  
51-85032-A  
Document #: 38-05030 Rev. **  
Page 7 of 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CY7C107B  
CY7C1007B  
28-Lead (300-Mil) Molded SOJ V21  
Document #: 38-05030 Rev. **  
Page 8 of 9  
© Cypress Semiconductor Corporation, 2001. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use  
of any circuitry other than circuitry embodied in a Cypress Semiconductor product. Nor does it convey or imply any license under patent or other rights. Cypress Semiconductor does not authorize  
its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress  
Semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress Semiconductor against all charges.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CY7C107B  
CY7C1007B  
Document Title: CY7C107B/CY7C1007B 1M x 1 Static RAM  
Document Number: 38-05030  
Issue  
Date  
Orig. of  
Change  
REV.  
ECN NO.  
Description of Change  
**  
109950  
12/02/01  
SZV  
Change from Spec number: 38-01116 to 38-05030  
Document #: 38-05030 Rev. **  
Page 9 of 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Coda Laminator Cold Mount Laminator User Manual
Country Home Products Tiller ROTO HOGTM User Manual
Crate Amplifiers Musical Instrument Amplifier XK100 User Manual
Dantax Flat Panel Television 32LCD V9 User Manual
Dimplex Electric Heater HAW1000N User Manual
Electro Voice Microphone RE510 User Manual
Faber Ventilation Hood INCA SMART User Manual
GE Air Conditioner AZ75E09DAC User Manual
Geemarc Telephone PhotoPhone User Manual
Gitzo Camcorder Accessories GT1541T User Manual