CyberData Stereo Amplifier 010861 930106A User Manual
VoIP Loudspeamplifier  
Operations G
(PoE)  
Part #010861  
930106A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Revision History  
Revision  
Date Released  
Description of Changes  
A
11/06/06  
This is the first release of this manual.  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
i
Contents  
Chapter 1 Product Overview  
1
1.1 Typical System Installation ...............................................................................................1  
1.2 Product Features ......................................................................................................2  
1.3 Supported Protocols .........................................................................................2  
1.4 Supported SIP Servers ......................................................................................2  
1.5 Product Specifications .....................................................................................3  
Chapter 2 Installing the VoIP Loudspeaker Am
5
2.1 Parts List ............................................................................................................5  
2.2 Loudspeaker Amplifier Setup ........................................................................6  
2.2.1 Loudspeaker Amplifier Components ................................................6  
2.2.2 Loudspeaker Amplifier Jumpers .........................................................7  
2.2.3 Connect the Loudspeaker Amplifier ..................................................8  
2.2.4 Confirm Operation ..............................................................................10  
2.2.5 Confirm the IP Address, Test the Audume ...................................... 11  
2.2.6 Adjust the Volume ...............................................................................12  
2.3 Configure the Loudspeaker Amplifier P.......................................................13  
2.3.1 Log in to the Configuration Ho..........................................................13  
2.3.2 Configure the Network Para..............................................................15  
2.3.3 Set up the Loudspeaker A..................................................................17  
2.3.4 Configure the SIP Param......................................................................18  
2.4 Upgrade the Firmware and Rer Amplifier ..................................................21  
2.4.1 Reboot the Loudspe..............................................................................23  
2.5 Restore the Factory Defa.................................................................................25  
Chapter 3 Mountre  
27  
3.0 Mount the Enclo..............................................................................................27  
Chapter 4 SServer  
29  
4.0 Set up a T...........................................................................................................29  
4.0.1 Ient .........................................................................................................29  
4.0.2 onment ....................................................................................................29  
Chshooting/Technical Support  
31  
5.Questions (FAQ) ..................................................................................................31  
....................................................................................................................................31  
ation .............................................................................................................................31  
...........................................................................................................................................32  
33  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ii Contents  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
1 Product Overview  
The Voice-over-IP (VoIP) Loudspeaker Amplifier (PoE) uses a single cabng  
LANs, and Session Initiation Protocol (SIP) to broadcast messages ovesystem.  
The small footprint and low height makes this an ideal loudspeaker ly mount  
almost anywhere.  
1.1 Typical System Installation  
Figure 1 illustrates how the VoIP Loudspeaker Amlly installed as part of a  
public address system.  
Figure 1. Public Add
Generic
1
2
6
VoIP LoudPoE  
Server  
VoIP Phone  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2
Product Overview  
1.2 Product Features  
●
●
●
●
●
●
●
●
SIP (RFC 3261) com
Dual-Speed 10/1
Web-based co
Web-based
High-eff
PoE
8W
VoIP Loudspeaker Amplifier  
n-PoE)  
rn speakers  
EMA enclosure  
1.3 Supported Protocols  
The Loudspeaker Amplifier sup
●
SIP  
●
HTTP Web-based con
Provides an intuitiasy system configuration and verification of  
loudspeaker am
●
●
DHCP Client  
Dynamicaes in addition to the option to use static addressing.  
TFTP C
Facimware upgrades of the latest loudspeaker amplifier capabilities.  
●
●
R
Video Profile  
s  
1 mu-law)  
.711 A-law)  
Time 20 ms  
1.4 Supted SIP Servers  
The following link contains information on how to configure the loudspeaker amplifier for the  
supported SIP servers:  
http://www.CyberData.net/support/voip  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
Product Overview 3  
1.5 Product Specifications  
Category  
Specification  
Sensitivity  
Output  
96dB/1W/1M S.P. Level  
8 W PoE/16 W with internal power supply  
10/100 Mbps  
Port Baud Rate  
Power Requirement  
Protocol  
802.3af compliant  
SIP RFC 3261  
Part Number  
Dimensions  
Weight  
010859  
14” x 10” x 4”  
4.4 lbs.  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
4
Product Overview  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
2 Installing the VoIP Loudspeaker Amplifier  
2.1 Parts List  
Table 2-1 illustrates the parts for each loudspeaker amplifier and includ.  
Table 2-1. Parts List  
Quantity  
Part Name  
1
Loudspeaker Amplifier Assembly  
1
Installation Quick Reference Guide  
1
Loudspeaker Amplifi
Accessory Kit (par
which includes:  
3 x #8 x 1-1/4
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
6
Installing the VoIP Loudspeaker Amplifier  
2.2 Loudspeaker Amplifier Setup  
Set up and configure each loudspeaker amplifier before you mount it.  
CyberData delivers each loudspeaker amplifier with the factory set default vicated in  
Table 2-2:  
Table 2-2. Factory Default Settings  
Parameter  
Factory Default Setting  
static  
IP Addressing  
IP Address  
192.168.3.10  
admin  
Web Access Username  
Web Access Password  
Subnet Mask  
admin  
255.255.255.0  
192.168.3.1  
Default Gateway  
2.2.1 Loudspeaker Amplifier Compon
Figure 2-1 shows the components mplifier (PoE).  
Figure 2plifier Components—PoE  
LEDs  
Ethernet connection  
RTFM switch  
Volume  
Speaker connection  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Installing the VoIP Loudspeaker Amplifier 7  
2.2.2 Loudspeaker Amplifier Jumpers  
See Figure 2-2 to identify the jumper and component locations.  
Figure 2-2. Jumper Locations  
JP9  
JP8  
JP7  
See Table 2-3 and Table 2-4 for th
Table 2-3. Jumower—802.3af Compliant (Default)  
Jumper  
JP7  
> Low Power (21V)  
F -> Low Power (21V)  
Position B -> Low Power  
JP8  
JP9  
umper Settings—High Power—Non-PoE Compliant  
Jum
Setting  
ON -> High Power (21V)  
ON -> High Power (21V)  
Position A -> High Power  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
8
Installing the VoIP Loudspeaker Amplifier  
2.2.3 Connect the Loudspeaker Amplifier  
Figure 2-3 illustrates how to connect the VoIP Loudspeaker Amplifier (PoE).  
Figure 2-3. Connect a Loudspeaker  
+
-
hernet Hub  
Speaker Configuration  
8 Ohms  
Standard 1 Speaker Configuration  
8 Ohms  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Installing the VoIP Loudspeaker Amplifier 9  
See Table 2-5 for details about connecting the loudspeaker amplifier.  
Table 2-5. Loudspeaker Amplifier Connections  
Connection Details  
Connection  
cation  
Loudspeaker  
ging amplifier  
●
Use two binding posts for up to 0.083 inch  
diameter loudspeaker wire.  
Ethernet  
amplifier  
l  
●
●
Use a RJ 45 cable.  
a
AC  
For a phase connection, use a press-d
connector for 14 AWG solid copper
●
●
For a neutral connection, use a p
connector for 14 AWG solid co
For an earth/ground conne
down connector for 14 A.  
a.Consult a licensed electrician for local elents.  
2.2.3.1 Loudspeaker Type  
The CyberData VoIP Loudspeaker A8 Ohm Bogen or equivalent unamplified  
loudspeaker. See Figure 2-4.  
rnspeaker  
2.2.3.2 g  
may connect a loudspeaker to a loudspeaker amplifier with a good quality speaker cable that is  
mited to 25 feet in length.  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
10 Installing the VoIP Loudspeaker Amplifier  
2.2.4 Confirm Operation  
After connecting the loudspeaker amplifier to the ethernet hub, use the LEDs on the loudspeaker  
amplifier face to confirm that the loudspeaker amplifier is operational and linketo the network.  
Figure 2-5. Loudspeaker Amplifier LEDs—Power and
reen)  
k LED (green/yellow)  
Figure 2-6. Loudspeaker Atus and Activity  
Status LED (green)  
Activity LED (green)  
2-6. Loudspeaker Amplifier LEDs  
LED  
Function  
Pow
en  
The power LED is illuminated a steady blue when the power is  
on and blue/green when the amplifier is in the high power mode.  
en  
After supplying power to the loudspeaker amplifier:  
1. The green Status LED illuminates after approximately five  
seconds to indicate the start of the firmware verification and load  
process.  
2. After approximately 15 seconds, the Status LED begins to  
blink at one second intervals to indicate the start of the firmware  
boot process.  
3. After approximately 35 seconds, the loudspeaker amplifier  
beeps once to indicate that it is operational.  
4. The Status LED will continue to blink at one second intervals  
to indicate normal operation.  
Link  
Green/Yellow  
The Link LED is illuminated green for a 10Mb link or  
yellow/green for a 100Mb link when the network link to the  
loudspeaker amplifier is established.  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Installing the VoIP Loudspeaker Amplifier 11  
Table 2-6. Loudspeaker Amplifier LEDs (continued)  
LED  
Color  
Function  
Activity  
Green  
The Activity LED blinks to indicate network traffic.  
2.2.5 Confirm the IP Address, Test the Audio, and Check
When the loudspeaker amplifier is operational and linked to the et Test  
Function Management (RTFM) switch (Figure 2-7) on the loude to announce  
and confirm the loudspeaker amplifier’s IP Address, test thag, and check the  
volume.  
Figure 2-7. RTFM
RTFM switch  
nce a loudspeaker amplifier’s current IP address:  
Press and hold the RTFM switch until it beeps (after one second).  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
12 Installing the VoIP Loudspeaker Amplifier  
2. Release the switch to hear the IP address announcement, and check the loudspeaker amplifier  
volume.  
Caution  
Equipment Caution: Pressing and holding the RTFM switch for longer than  
20 seconds will restore the loudspeaker amplifier to the factory default  
settings. See Section 2.5, "Restore the Factory Default Settings".  
2.2.6 Adjust the Volume  
To adjust the loudspeaker amplifier volume, turn the Volume he loudspeaker  
amplifier face.  
Figure 2-8. Volum
Volume control  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installing the VoIP Loudspeaker Amplifier 13  
2.3 Configure the Loudspeaker Amplifier Parameters  
To configure the loudspeaker amplifier online, use a standard web browser.  
Configure each loudspeaker amplifier and verify its operation before you mouen you are  
ready to mount a loudspeaker amplifier enclosure, refer to Chapter 3, “Mouure” for  
instructions.  
All loudspeaker amplifiers are initially configured with the default IP Table 2-7.  
When configuring more than one loudspeaker amplifier, attach tfiers to the  
network one at a time to avoid IP address conflicts.  
Table 2-7. Factory Defaul
Parameter  
Fact
s
IP Addressing  
IP Address  
Web Access Username  
Web Access Password  
Subnet Mask  
55.0  
8.3.1  
Default Gateway  
2.3.1 Log in to the Configuratige  
1. Open your browsddress.  
For the initial peaker, open your browser to the default IP address:  
http://19
Note is on the same IP network as the loudspeaker amplifier.  
2. the following default Web Access Username and Web Access Password  
Page (Figure 2-9):  
name: admin  
assword: admin  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                           
14 Installing the VoIP Loudspeaker Amplifier  
Figure 2-9. Home Page  
VoIP Loudspeaker Amplifier  
3. On the Home Page, review navigation buttons described in Table 2-8.  
e Page Overview  
Web Page Item  
Serial #  
n  
serial number.  
Ethernet Address  
IP Addressing  
IP Address  
vice ethernet address.  
Shows the current IP addressing setting (DHCP or static).  
Shows the current IP address.  
Shows the current subnet mask address.  
Shows the current default gateway address.  
Link to the Speaker Setup page.  
Subnet
Defa
Link to the Network Setup page.  
Link to the SIP Setup page.  
Link to the Upgrade Firmware web page.  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Installing the VoIP Loudspeaker Amplifier 15  
2.3.2 Configure the Network Parameters  
1. Click the Network Setup button to open the Network Setup page (Figure 2-10).  
Figure 2-10. Network Setup Page  
VoIP Loudspeakeifier  
2. On the Nenter values for the parameters indicated in Table 2-9.  
Table 2-9. Network Setup Parameters  
Web
Description  
I
Select either DHCP IP Addressing or Static IP Addressing by  
marking the appropriate radio button. If you select Static, configure  
the remaining parameters indicated in Table 2-9. If you select DHCP,  
go to Step 3.  
Enter the static IP address.  
ask  
t Gateway  
S Server 1*  
DNS Server 2*  
Enter the Subnet Mask address.  
Enter the Default Gateway address.  
Enter the DNS Server 1 address.  
Enter the DNS Server 2 address.  
Click on this button to save your configuration settings. Changing a  
parameter that has an asterisk next to it will cause a system reboot  
when saved.  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
16 Installing the VoIP Loudspeaker Amplifier  
Table 2-9. Network Setup Parameters (continued)  
Web Page Item  
Description  
Link to the Speaker Setup page.  
Link to the SIP Setup page.  
Link to the Upgrade Firmware page.  
Link to the Home page.  
3. After changing the parameters, click Save Settinhanged parameters and  
reboots the speaker if appropriate.  
4. Connect the speaker to the target network.  
5. From a system on the same network as rowser with the new IP address of  
the speaker.  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing the VoIP Loudspeaker Amplifier 17  
2.3.3 Set up the Loudspeaker Amplifier  
1. Click on the Speaker Setup button to open the Speaker Setup page. See Figure 2-11  
Figure 2-11. Loudspeaker Amplifier Setup  
VoIP Loudspeaklifier  
2. On the Ler Setup page, enter values for the parameters indicated in  
Table 2
2-10. Loudspeaker Amplifier Setup Parameters  
We
Description  
Username  
ss Password  
assword  
Use this field to change the Web Access Username  
Use this field to change the Web Access Password  
Use this field to re-enter a new password  
Enable/Disable the speaker tone (beep) before each page.  
e Before Paging  
Tone After Initialization  
Enable/Disable the speaker tone (beep) after the system  
startup.  
Click on this button to save your configuration settings.  
Changing a parameter that has an asterisk next to it will  
cause a system reboot when saved.  
Click on this button to do an audio test. Generates a voice  
message for testing the speaker audio quality and volume.  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
18 Installing the VoIP Loudspeaker Amplifier  
Table 2-10. Loudspeaker Amplifier Setup Parameters (continued)  
Web Page Item  
Description  
Link to the Network Setup page.  
Link to the SIP Setup page.  
Link to the Upgrade Firmwa
Link to the Home Pa
3. After changing the parameters, click Save Settin
2.3.4 Configure the SIP Parameters  
1. Click SIP Setup to open the SIP Set.  
Note For specific server configurwing URL:  
http://www.CyberData.
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installing the VoIP Loudspeaker Amplifier 19  
Figure 2-12. SIP Setup Page  
VoIP Loudspeaker Amplifier  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
20 Installing the VoIP Loudspeaker Amplifier  
2. On the SIP Setup page, enter values for the parameters indicated in Table 2-11.  
Table 2-11. SIP Setup Parameters  
Web Page Item  
Description  
SIP Server*  
Enter the SIP server represented as umeric IP  
address in dotted decimal notatiolified  
host name (FQHN) up to 64 ch
Remote SIP Port*  
Local SIP Port*  
SIP User ID*  
Enter the Remote SIP Port 0).  
Enter the Local SIP Port 60).  
Enter the SIP User ID ic characters).  
Authenticate ID*  
Enter the Authentanumeric  
characters).  
Authenticate Password*  
Enter the Au(up to 30 alphanumeric  
characters
SIP Registration*  
Enableon.  
Unregister on Reboot*  
• Selly unregister the paging  
ooted.  
e paging amplifier registered when it  
Register Expiration*  
gistration lease time in minutes (default is  
s button to save your configuration settings.  
g a parameter that has an asterisk next to it will  
a system reboot when saved.  
k to the Speaker Setup page.  
Link to the Network Setup page.  
Link to the Upgrade Firmware page.  
Link to the Home page.  
ging the parameters, click Save Settings.  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Installing the VoIP Loudspeaker Amplifier 21  
2.4 Upgrade the Firmware and Reboot the Loudspeaker  
Amplifier  
To upload the speaker firmware from your PC:  
1. Set up a TFTP server.  
If you do not already have a TFTP server running on your networking up a  
TFTP Server”.  
2. Retrieve the latest speaker firmware from the CyberData w
www.CyberData.net/support/voip  
3. Unzip the speaker version file. This file may contain t
•
•
•
Kernel firmware file: xxx-image-xxx-xxx.bin  
Application firmware file: xxx-romdisk-xxx
Release notes  
4. Copy the firmware files to be upgraded TP server directory:  
•
•
c:\tftp-root\ (for Windows)  
/tftpboot/ (for Linux)  
5. Log in to the speaker home paction 2.3.1, "Log in to the Configuration  
Home Page".  
6. Click the Upgrade Firmthe Firmware Upgrade page. See Figure 2-13.  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
22 Installing the VoIP Loudspeaker Amplifier  
Figure 2-13. Firmware Upgrade Page  
VoIP Loudspeaker Amplifier  
7. Enter the IP address oto the TFTP Server IP parameter field.  
8. Enter the firmwaro be uploaded into the New Filename parameter field.  
For example, kmage-spk-sip.bin".  
9. Click Uplo
Note Throcess. Once the speaker has uploaded the file, the Uploading  
page appears, indicating that the firmware is being written to flash.  
tomatically reboot when the upload is complete. When the countdown  
ware Upgrade page will refresh. The uploaded firmware filename should  
the system configuration (indicating successful upload and reboot).  
and 9 if you are uploading the Kernel and Application files.  
, Application filename "201-romdisk-spk-sip.img".  
2 shows the web page items on the Firmware Upgrade page.  
Table 2-12. Firmware Upgrade Parameters  
age Item  
stem Configuration  
Bootname  
Description  
Shows the current configuration.  
Shows the current boot loader filename.  
Shows the current kernel filename for partition 1 and 2.  
Kernel  
Application  
Shows the current application filename for partition 1  
and 2.  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Installing the VoIP Loudspeaker Amplifier 23  
Table 2-12. Firmware Upgrade Parameters (continued)  
Web Page Item  
Description  
Load new firmware to Partition 1  
New Filename  
Enter the TFTP Server IP address.  
Enter the new file name for the kerneapplication  
firmware file that you are uploadin
Click on this button to automatilected  
firmware and reboot the syst
Link to the Speaker Set
Link to the Netw
Link to ge.  
Li
on to reboot the system.  
2.4.1 Reboot the Loudspeake
To reboot a loudspeakthe web page as instructed in Section 2.3.1, "Log in to the  
Configuration Hom
1. Click Upgrn the Firmware Upgrade page (Figure 2-14). Use the Reboot  
System sde of the page.  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
24 Installing the VoIP Loudspeaker Amplifier  
Figure 2-14. Reboot System Section  
VoIP Loudspeaker Amplifier  
2. Click Reboot. A norms per the Status LED section of Table 2-6.  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing the VoIP Loudspeaker Amplifier 25  
2.5 Restore the Factory Default Settings  
When troubleshooting configuration problems, it is sometimes convenient to restore the device to a  
known state.  
Each loudspeaker amplifier is delivered with factory set default values for tindicated  
in Table 2-13. Use the RTFM switch on the loudspeaker amplifier face to ters to  
the factory default settings.  
When you use the RTFM switch, the factory default settings are reameters  
indicated in Table 2-13. The other parameters in the current loudfiguration  
will remain unchanged.  
Table 2-13. Factory Defau
Parameter  
Fact
s
IP Addressing  
IP Address  
Web Access Username  
Web Access Password  
Subnet Mask  
55.0  
8.3.1  
Default Gateway  
To restore these parameters to ttings:  
1. Press and hold the RTnds.  
2. The loudspeaker aer one second. Continue to hold the switch until the  
loudspeaker amter 20 seconds.  
3. Release the occurs:  
•
•
A voes that the factory default settings are being restored.  
Ostored, a voice message announces the restored default IP address:  
age announces that the loudspeaker amplifier is rebooting.  
peaker amplifier reboots.  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
26 Installing the VoIP Loudspeaker Amplifier  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
3 Mounting the Enclosure  
3.0 Mount the Enclosure  
Before you mount the enclosure, make sure that you have received all o
enclosure. Refer to Table 3-14.  
Table 3-14. Wall Mounting Components (Part o
Quantity  
Part Name  
n  
3
#8 Sheet Metal Screws  
Note The loudspeaker amplifier was de. Mounting it on the external part of  
a building will require additionherproofing, cabling access, and  
lightning suppression. Consan for details.  
See Figure 3-1 to mount the enclo
Note For mounting, use thETAL SCREWS to secure the enclosure.  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
28 Mounting the Enclosure  
Figure 3-1. Loudspeaker Amplifier Enclosure Assembly  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
29  
4 Setting up a TFTP Server  
4.0 Set up a TFTP Server  
Upgrading the VoIP Loudspeaker Amplifier firmware requires a TFTP access  
the Web interface where you can upload the firmware files.  
4.0.1 In a LINUX Environment  
To set up a TFTP server on LINUX:  
1. Create a directory dedicated to the TFTP server, be uploaded to that  
directory.  
2. Run the following command where /tftthe directory you created in  
Step 1: the directory that contains the fir example:  
in.tftpd -l -s /tftpboot/yame  
4.0.2 In a Windows Environment  
You can find several optiop a Windows TFTP server. This example explains  
how to use the Solarwinver, which you can download at:  
http://www.Cybert/voip  
To set up a TFTs:  
1. Install e.  
2. Seecurity tab/Transmit Only.  
3default directory name, and then move the firmware files to be uploaded to  
several options online for setting up a Solarwinds server. This example explains  
the Solarwinds freeware TFTP server, which you can download at:  
/www.CyberData.net/support/voip  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
30 Setting up a TFTP Server  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
5 Troubleshooting/Technical Support  
5.1 Frequently Asked Questions (FAQ)  
Go to the following URL to see CyberData’s list of frequently asked que
http://www.CyberData.net/support/voip  
5.2 Documentation  
The documentation for this product is released in an rsion only. You can  
download PDF copies of CyberData product docu
www.CyberData.net—>Support—>Drivers, —>VoIP Products  
5.3 Contact Information  
Contact  
CyberData Corporation  
2555 Garden Road  
Monterey, CA 93940  
USA  
www.CyberData.net  
Phone: 800-CYBERD
Fax: 831-373-4193  
Sales  
Sales (831) 37
Technical  
Support  
Phone: n 333  
Email.net  
Returned  
Materials  
Tcontact the CyberData Returned Materials Authorization (RMA) department  
Authorization  
2601, Extension 136  
CyberData.net  
urning a product to CyberData, an approved CyberData RMA number must be printed on  
ide of the original shipping package. No product will be accepted for return without an  
ved RMA number. Send the product, in its original package, to the following address:  
yberData Corporation  
2555 Garden Road  
Monterey, CA 93940  
Attention: RMA "your RMA number"  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
32 Troubleshooting/Technical Support  
5.4 Warranty  
CyberData warrants its product against defects in material or workmanship for a period of two  
years from the date of purchase. Should the product fail within the warranty pCyberData will  
repair or replace the product free of charge. This warranty includes all parts
If the product is out-of-warranty and fails, a flat rate repair charge of onrchase  
price will be assessed. Repair costs for products that are in warranty, boper  
modifications or abuse, will be charged at the out-of-warranty rate. PyberData,  
both in and out-of-warranty, are shipped to CyberData at the expCharges for  
shipping repaired products back to the customer will be paid b
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
33  
Index  
DHCP Client 2  
DHCP IP addressing 15  
dimensions 3  
DNS server 15  
Symbols  
#8 sheet metal screws 27  
Numerics  
3 x #8 x 1-1/4” truss head screws 5  
E
enclosure, moun
expiration tim20  
A
F
accessory kit 5  
activity LED 11  
fa25  
29  
address, configuration login 13  
announcing a loudspeaker amplifier’s IP address 11  
asterisk 15, 17  
audio encodings 2  
ge 13  
eb-based configuration 2  
C
changing  
the web access password 17  
configurable parameters 14, 15, 17, 20, 2
configuration  
I
default IP settings 13  
network 15  
illustration of enclosure mounting process 27  
installation, typical loudspeaker amplifier system 1  
IP address 6, 13, 15, 25  
SIP 18  
using Web interface 13  
configuration home page 1
CyberData contact informs, tech  
support, servic
IP addressing 15  
J
jumpers, settings 7  
D
default  
gate
IP
loudr settings 33  
L
lease, SIP server expiration time 20  
LEDs 10  
link LED 10  
Linux, setting up a TFTP server on 29  
local SIP port 20  
log in address 13  
subnet m25  
username assword 6, 13, 25  
web login username and password 13  
default gateway 6, 13, 15, 25  
default IP settings 13  
default login address 13  
default loudspeaker amplifier settings 25  
loudspeaker amplifer configuration page  
configurable parameters 17  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
34  
loudspeaker amplifer setup 17  
loudspeaker amplifier configuration  
default IP settings 13  
loudspeaker amplifier configuration page  
configurable parameters 14, 15, 20, 22  
loudspeaker amplifier operations, verifying 17  
loudspeaker, cabling/wiring 9  
loudspeaker, type 9  
product specifications 3  
supported protocols 2  
supported SIP servers 2  
typical system installation 1  
product specifications 3  
protocols supported 2  
R
reboot 23, 25  
registration and expie 20  
remote SIP port 20  
M
mounting an enclosure 27  
reset test functioh 11  
resetting the Ilt 27, 31  
restoring fac25, 33  
RMA returization 31  
RTFM s
N
network configuration of loudspeaker amplifier 15  
network link activity, verifying 10  
Network Setup 15  
RTP/
O
ss, SIP 20  
a TFTP server 29  
default 25  
ession initiation protocol) 2  
Configuration 18  
P configuration  
output 3  
P
SIP Server 20  
packet time 2  
part number 3  
parts  
#8 sheet metal screws 27  
parts list 5  
password  
SIP registration 20  
SIP server 20  
SIP servers supported 2  
static IP addressing 15  
status LED 10  
subnet mask 6, 13, 15, 25  
supported protocols 2  
changing for web conf
for SIP server login 
login 13  
restoring the de
port  
T
local SIP 20  
remote SI
technical support, contact information 31  
TFTP server 2, 29  
truss head screws 5  
port baud r
power LE
power
power, speaker amplifier 8  
product  
configurin
mounting 27  
parts list 5  
U
unregister, from SIP server 20  
user ID  
for SIP server login 20  
user ID, SIP 20  
product features 2  
product overview  
product features 2  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
username  
changing for web configuration access 17  
default for web configuration access 13  
restoring the default 6, 13, 25  
V
verifying  
loudspeaker amplifier operations 17  
network link and activity 10  
power on to loudspeaker amplifer 10  
W
warranty 32  
web access password 6, 13, 25  
web access username 6, 13, 25  
web configuration log in address 13  
web-based loudspeaker amplifier configuration 13  
weight 3  
Windows, setting up a TFTP server on 29  
VoIP Loudspeaker Amplifier Operations Guide  
930106A  
CyberData Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
CyberData Corporation  
930106A  
VoIP Loudspeaker Amplifier Operations Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cisco Systems Network Router 10720 User Manual
Conair Compact Loader B32 User Manual
Crate Amplifiers Musical Instrument Amplifier GTD15 User Manual
Desa Pole Saw 110731R User Manual
Dimplex Heat Pump SI 75ZSR User Manual
Directed Audio CD Player 1200T User Manual
Fisher Price Automobile t6138 User Manual
Furman Sound Power Supply PL PRO E II User Manual
GE Oven JKP70BM User Manual
Globalsat Technology GPS Receiver GH 615B GH 615M User Manual