OWNER'S MANUAL
TVD2000A
ATSC TV/DVD COMBO
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
CH+
VOL
_
MENU
VOL
+
OK
S.MODE
CH-
STOP
REV
SETUP PAUSE/STEP SUBTITLE
FWD
PREV
NEXT
A-B
D.MENU
REPEAT
PLAY/ENTER
SLOW
ANGLE
TITLE/PBC SEARCH
AUDIO PROGRAM ZOOM
D.CALL
GUIDE
10+
EXIT
ARC
CH.LIST FAV.LIST
Before operating the unit, please read this manual thoroughly.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
FCC WARNING-This equipment may generate
CAUTION: USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction
manual. The user could lose the authority
to operate this equipment if an unauthorized
change or modification is made.
CAUTION: VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN AND
INTERLOCK DEFEATED. DO NOT
STARE INTO BEAM.
LASER SAFETY
This unit employs a laser. Only a qualified
service person should remove the cover
or attempt to service this device, due to
possible eye injury.
LOCATION:INSIDE,NEAR THE DECK
MECHANISM.
CONTENTS
Before Operation
Important Safety Instructions............................................................
Installation...........................................................................................
Antenna Connection..........................................................................
Preparation of the remote control......................................................
Function buttons and External Connections...................................
Front panel of the TV set..................................................................
Rear panel of the TV set....................................................................
Using the remote control...................................................................
The other video and audio equipment .................................................
Antenna connections ...........................................................................
Cable TV connections .........................................................................
Connections the other equipment .......................................................
1
5
5
5
6
6
7
8
9
10
11
12
Basic operation
Setting the language and blue screen .................................................
13
14
16
17
18
19
21
22
23
28
29
34
Channel menu .....................................................................................
Channel selection ................................................................................
Volume adjustment .............................................................................
Screen information ..............................................................................
Video menu ........................................................................................
Manual time setting ............................................................................
Setting the ON/OFF timer ..................................................................
Function menu ...................................................................................
Closed caption ...................................................................................
DTV setup menu ................................................................................
Other functions ...................................................................................
DVD Operation
DVD Features...................................................................................
Special Playback Functions..............................................................
DVD System Setup..........................................................................
Playable Discs...................................................................................
Disc Protection and DVD Characteristics..........................................
Others
36
38
39
43
44
Troubleshooting guide........................................................................
Specifications .....................................................................................
Warranty ............................................................................................
45
46
47
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
This symbol indicates that dangerous
voltage constituting a risk of electrical
shock is present in this unit.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol indicates there are important
operating and maintenance instructions
in packaged with this product.
Caution - Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure
Product complies with radiation performance standards under the Federal Food, Drug and Cosmetic Act
1. READ THESE INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. KEEP THESE INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED ALL WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW ALL INSTRUCTIONS
All operating and use instructions should be followed.
5.CLEAN ONLY WITH DRY CLOTH.
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.
6. DO NOT BLOCK ANY VENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE
MANUFACTURER`S INSTRUCTIONS.
7. DO NOT USE THIS APPARATUS NEAR WATER
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
PORTABLE CART WARNING
(symbol provided by RETAC)
9. Only use attachments/accessories specified by the manufacturer.
10.Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
11. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
to ensure reliable operation of the unit, and to protect it from overheating.
S3126A
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided and/or the manufacturer`s instructions have been adhered to.
12. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the operating instructions.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety Instructions
13. GROUNDING OR POLARIZATION
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
14. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
15. Unplug this apparatus during lightning storms or when unused for long periods of time.
16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
17. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall onto or against such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits, as contact with them might be fatal.
18. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric
shock.
19. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage
points or short out parts that could result in fire or electric shock. Never spill or spray any
type of liquid into the unit.
20. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable
system is grounded to provide some protection against voltage surges and built-up static
charges, Section 810 of the National Electrical Code (NEC), ANSI/NFPA 70, provides
information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
21. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety Instructions
22. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions, as an improper
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for
service.
23. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
24. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform
safety checks to determine that the unit is in proper operating condition.
25. HEAT
The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
26. DISC SLOT
Keep your fingers well clear of the disc slot as it is closing. It may cause serious personal
injury.
27. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the
equipment from the wall outlet. Failure to do so may cause an electric shock and serious
personal injury. Read the owner's manual of the other equipment carefully and follow the
instructions when making any connections.
28. SOUND VOLUME
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden
high volume sound may cause hearing or speaker damage.
29. SOUND DISTORTION
Do not allow the product output distorted sound for a longtime. It may cause speaker
overheating and fire.
30. LASER BEAM
Do not look into the opening of the disc slot or ventilation opening of the product to see the
source of the laser beam. It may cause sight damage.
31. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may
cause serious personal injury and product malfunction.
32. NOTE TO CABLE TV SYSTEM INSTALLER
This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the point
of cable entry as practical.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Antenna connection
If the picture is not clear or is snowy, it is recommended that an External Aerial
is used, this is usually mounted outside.
300 twin-lead cable
Antenna adapter
(Not supplied)
Aerial input
75 standard
coaxial type
75 coaxial cable
Plug
(Not supplied)
AC power socket
Note:
* It is recommended that a 75 ohm coaxial antenna is used to avoid
interference.
*To avoid interference from electrical signals, do not bind the antenna
cable together with any mains lead.
Preparation for the remote control
Battery installation
Remove the battery cover.
Insert two size AA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
Tips for remote operation
When the remote control will not be used for a long period of time or when the
batteries are worn out, remove the batteries to prevent leakage.
Do not throw the batteries into fire. Dispose of used batteries in the specified
manner.
Do not drop, dampen or disassemble the remote control.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts and functions
Front panel the TV set
POWER
Power Indicator
Signal Receiver
Power Switch
The DVD Player
Play
the DVD
Channel Position
up/down
Menu
TV/AV/DVD
Video
R/L
Audio
Stop
the DVD
Open/close
the DVD
Switching
Volume up/ down
TV/AV/DVD
Switching
Remote Receiving
Window
Stop
Power Button
Power Indicator
Signal Receiver
Power Switch
OPEN/CLOSE PLAY
STOP
CH-
CH+
VOL-
VOL+
MENU
Earphone
Audio
Video
Play
Channel Position
up/down
Stop
the DVD
Volume up/ down
Open/close
Menu
TV/AV/DVD
Switching
the DVD
the DVD
VIDEO L/MONO-AUDIO/R EARPHONE
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts and functions
Remote Receiving
Window
Power Button
PLAY/PAUSE STOP
SKIP-
SKIP+
OPEN/CLOSE
MENU
VOL-
VOL+
CH-
CH+
Rear panel of the TV set
COMPONENT
Cb
Cr
Video Y input terminal
COAXIAL
OUTPUT
Y
Video Cb input terminal
Video Cr input terminal
COAXIAL OUTPUT
Antenna input socket
Video output terminal
OUT
Audio right channel output terminal
Audio left channel output terminal
IN
Audio right channel input terminal
VIDEO1
L
R
Video 1
AUDIO1
Audio left channel input terminal
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Buttons on the remote control
Power Switch
Open/close DVD Tray
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
TV / AV Mode Selection
TV / DTV Mode Selection
TV / DVD Mode Selection
Mute Sound
Q.VIEW
INFO
MUTE
Q.VIEW button: Return to Previous Channel
On Screen Display
1
5
2
6
0
3
4
Channel / Track Selection
SAP button: Second Audio Program
7
-
8
CC
CC Mode Selection: Closed captioning (selects mode).
- button: select additional channels being broadcasted.
For example, to select channel “54-3”, press “54”, “-”, “3”,
and then press “OK”.
9
SAP
P.MODE
CH+
P.MODE (picture mode): Adjust Picture Mode
Volume/Channel Adjusting
VOL
MENU
VOL
+
Go to TV Menu
_
Exit On Screen Display
OK
SLEEP
GUIDE
TV Sleep button
CH-
CH.LIST (channel list)
CH.LIST FAV.LIST
SIZ
GUIDE reference (may not operate using some systems)
FAV.LIST (favorite list) Enter
SIZ: Aspect Ratio Control under 16:9 digital signal input
DVD STOP Playback
PAUSE/STEP SUBTITLE
SETUP
FWD
STOP
REV
PREV
NEXT
A-B
DVD SETU
P
DVD FAST REVERSE
DVD CAPTION (SUBTITLE) Selection
DVD PAUSE/STEP
D.MENU
REPEAT
SLOW
PLAY/ENTER
DVD PREVIOUS Chapter / Track
DVD FAST FORWARD
DVD NEXT Chapter / Track
DVD MENU
TITLE/PBC SEARCH
ANGLE
AUDIO PROGRAM ZOOM
D.CALL
DVD A-B REPEAT
DVD Playback / Confirm Menu Selection
UP
10+
CLR
DVD REPEAT Mode
LEFT
RIGHT
DVD Cursor Move button
DVD SLOW
DOWN
DVD ANGLE Change
DVD SEARCH
DVD TITLE
DVD AUDIO Mode
DVD INFORMATION
DVD PROGRAM
Zoom Function
10+
CLR: clear
8
Download from Www.Somanuals.com. All Manuals Search And Download.
The other video and audio equipment Connections
You can connect the DVD,VCR and stereo system to the output to enjoy a
higher quality of picture and sound effect.
Amplifier
To COAXIAL
type digital
audio input
Coaxial cable
ANT IN
COAXIAL OUT
1
1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna connections
Ifyouareusinganindoororoutdoorantenna, followtheinstructionsbelowthatcorrespondtoyourantenna
system. If you are using a cable TV service (CABLE), see the Cable TV connections.
Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the RF IN jack.
RF IN
jack
RF IN
jack
If using a flat UHF 300 ohm twin-lead wire,
connect these flat wires to an optional 75/300
ohm matching transformer/adapter (available
at many retailers), and then connect the
adapter to the 'RF' IN connector on the back
of the television.
75 ohm
coaxial
cable
300-75 ohm
matching
transformer
Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm matching
transformer.Attach thetransformer to the combiner,
then attach the combiner to the RF IN jack.
300-75 ohm
matching
transformer
RF IN
jack
Combiner
UHF 300 ohm
VHF 300 ohm
Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner.Attach the combiner
to the RF IN jack.
RF IN
jack
VHF 75 ohm
Combiner
UHF 300 ohm
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable TV connections
This unit has an extended tuning range and can tune most cable channels without using a Cable TV
Converter box. Some cable companies offer "premium pay channels" in which the signal is
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device
which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a Converter/Descrambler
RF IN
box, connect the 75 ohm Coaxial Cable directly to the RF IN
jack
Jack on the back of the unit.
75 ohm
coaxial cable
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect
the output jack of the converter/descrambler box to the RF IN jack on the unit. Follow the connections shown
below. Set the unit to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the
converter/descrambler box to select channels.
Incoming
75 ohm
cable TV cable
RF IN
jack
75 ohm cable to
unit
Converter/
descrambler
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the
cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B"
position, you can directly tune any nonscrambled channels on your unit. With the switch in the "A" position, tune your
unit to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box
to tune scrambled channels.
Incoming
75 ohm
Converter/
descrambler
RF IN
jack
75 ohm cable
to unit
cable TV cable
A
Splitter
A/B switch
B
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to other equipment
Using the audio/video inputs
If you connect the TV to a camcorder or Video Game, you can select different modes by pressing
TV/AV.
Press TV/AV repeatedly to select the desired mode.
"AV1", "AV2" ,"COMPONENT","DVD" or TV channel will display on the screen for 4 seconds, no signal
will be displayed on the screen when no signal input.
AV
1
AV1
AV2
COMPONENT DVD
TV Channel
To connect the TV to a camcorder
To playback from the camcorder, connect the camcorder to the unit as shown.
Camcorder
Front of TV
VIDEO IN
To Audio/Video OUT
AUDIO IN (R)
AUDIO IN (L)
Audio/Video cord (not supplied)
To connect the TV to a Video Game
The TV can also be used as a display device for many video games. However, due to the wide variety
of formats, they have not all been included in the suggested connection diagram. Youl need to consult
each component's Owner's Manual for additional information.
Front of TV
VIDEO IN
Video Game
AUDIO IN (R)
AUDIO IN (L)
To Audio/Video OUT
Audio/Video cord (not supplied)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the language and blue screen
You can choose from three different
languages (English, French and
Spanish) for the on-screen displays.
SETTING THE LANGUAGE
1 Press POWER ( ) to turn on the TV.
0101
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
2 Press MENU, and then
press VOL+/- button to
select FUNCTION menu,
then press CH- button to
enter.
Q.VIEW
INFO
MUTE
FUNCTION
ENGLISH
LANGUAGE
BLUE SCREEN
NTSC CAPTION
PARENTAL LOCK
ON
C1
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
CH+
3 Press CH+/- button to select the LANGUAGE option,
then press VOL+/- to select the desired language:
English, Spanish or French.
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
4 Press MENU until the MENU screen disappears.
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
SETTING THE BLUE SCREEN
AUDIO PROGRAM ZOOM
10+
CLR
1 Press MENU, and then
0101
press VOL+/- button to
select FUNCTION menu,
then press CH- button to
enter.
FUNCTION
ENGLISH
LANGUAGE
BLUE SCREEN
NTSC CAPTION
PARENTAL LOCK
ON
C1
2 Press CH+/- button to select the BLUE SCREEN option,
then press VOL+/- to select OFF or ON.
3 Press MENU until the MENU screen disappears.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel menu
Here describes the case for searching and memorizing channels for DTV/ATV.
AUTO SCAN (DTV/ATV)
(When using antenna)
The channels broadcasted in DTV and ATV are
automatically scanned and memorized. Only the
receivable channels in the area where this TV is
used will be memorized.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
AUTO SCAN (CATV)
(When using basic cable)
1
5
2
6
0
3
4
The channels broadcasted in CATV are automatically
scanned and memorized.
7
-
8
CC
9
SAP
NOTE:
Be sure that antenna or cable is connected properly before plugging the
power cord.
P.MODE
CH+
VOL
MENU
VOL
+
_
1 Press MENU, and then press VOL+/- button to select
CHANNEL menu, then press CH- button to enter.
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
2 Press CH+/- button to
PREV
0101
FWD
NEXT
select the RECEPTION
option.
D.MENU
A-B
REPEAT
CHANNEL
SKIP
OFF
AIR
SLOW
PLAY/ENTER
RECEPTION
AUTO SCAN
COLOR SYSTEM
3 Press VOL +/- button
to select AIR/ CABLE.
SEARCH
D.CALL
ANGLE
TITLE/PBC
AUTO
AUDIO PROGRAM ZOOM
10+
CLR
4 Press CH +/- button
Only in analog signal
to select AUTO SCAN option.
5 Press VOL+ button to start scanning.
When you press VOL+ on the remote control,
scanning the channels in both analog and digital
modes will automatically start.
When scanning is completed, the memorized
smallest channel will be displayed.
When you press MENU button while scanning, the
scanning is interrupted and the memorized smallest
channel is displayed.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel menu
SETTING SKIP
After the programs are presetting, you can skip some
programs so that to select your favorite channels only.
1 Press MENU, and then
press VOL+/- button to
select CHANNEL menu,
0101
then press CH- button to
enter.
CHANNEL
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
SKIP
RECEPTION
AUTO SCAN
OFF
AIR
Q.VIEW
INFO
MUTE
2 Press CH+/- button to
select the SKIP option,
then press VOL+/- button
to select ON or OFF.
COLOR SYSTEM
AUTO
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
NOTE: When tuning DTV channels and no signal is present,
the SKIP-over option will be available.
CH+
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
If you want to recover the skipped channel
CH.LIST FAV.LIST
SIZ
1. Use Direct-digit Choosing button to select the number
of the channel to be recovered.
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
2. Do the above steps again.
D.MENU
A-B
REPEAT
3. Press VOL+/- button to set SKIP as Off.
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
SETTING COLOR SYSTEM(only in ATV mode)
AUDIO PROGRAM ZOOM
10+
CLR
1 Press MENU, and then
press VOL+/- button to
0101
select CHANNEL menu,
then press CH- button to
CHANNEL
enter.
SKIP
OFF
AIR
RECEPTION
AUTO SCAN
COLOR SYSTEM
AUTO
2 Press CH+/- button to
select the COLOR
SYSTEM option, then
press VOL+/- button
to select AUTO or NTSC.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel selection
You can select the channel by using either CH +/- button
or Channel number buttons. How to select the channel
in each way is shown below.
1 Using CH +/- button
Using CH +/- button on the remote control, change the channel.
Same operation is available with CH +/- button on the front panel
of the main unit.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
Press the Direct Channel selection buttons to select the channel.
2
Antenna Mode Direct Channel Selection
1
5
2
6
0
3
4
When the Antenna/Cable menu option is in the Antenna position, all channels
can be instantly selected by using
digits button. For example:
7
-
8
CC
2-9: Press 2-9 as needed.
9
SAP
P.MODE
Example, to select channel 2, press "2".
10-69: Press the 2 digits in order. If you select the channel more than 69,
the channel will not be change, it is no available.
CH+
VOL
MENU
VOL
+
_
CABLE Mode Direct Channel Selection
When the Antenna/Cable menu option is in the Cable position, channels
can be selected as follows:
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
1-9: Press 1-9 as needed. Example, to select channel 2,
press "2".
10-99: Press the 2 digits in order. Example, to select channel 32,
press "3" then "2".
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
100-125: Press the digital 1 button, the "1--" will appear
on the screen, then press the 2 digits of remain in order.
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
CABLE
TV
ANGLE
TITLE/PBC
SEARCH
D.CALL
VHF
2-13
VHF
2-13
AUDIO PROGRAM ZOOM
UHF
14-69
STD/HRC/IRC
14-36
10+
CLR
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
NOTE:
In the DTV broadcasting, one channel sometimes broadcasts
multiple programs depending on the air time. In this case, the
main channel is called major channel and the sub channel is
called minor channel.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume adjustment
This section describes how to adjust the volume when
viewing TV. The MUTE function, which is useful when
you have a visitor or a phone call, will be also described.
1 Using VOL +/- button
You can adjust the audio volume with VOL +/- button on
the remote control.
The volume bar is displayed at the bottom of the screen
when adjusting the volume.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
Same operation is available with VOL +/- on the front
panel of the main unit.
1
5
2
6
0
3
4
7
-
8
CC
2 Using MUTE button
9
SAP
P.MODE
Press MUTE button on the remote control to mute the
sound.
CH+
The colored volume bar is displayed on the screen while
muting.
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
To release the MUTE status, press MUTE button again
or press VOL+ button.
MUTE will displayed continuously When CC is OFF, MUTE
will disappeared 5 seconds later When CC is ON.
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
SWITCHING AUDIO
This section describes how to switch the audio language
in the digital mode.
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
2 Switch the audio language.
When you press SAP button on the remote control, the
currently selected language and the number of received
languages will be displayed on the screen.
Every time you press SAP button on the remote control,
the language will be switched.
Languages you can switch differ depending on the
receiving broadcast.
NOTE:
Pressing the SAP button works only with the some TV
channels, and does not work with external equipment such as
DVD players.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen information
You can display the currently selected channel number or
other information such as the audio mode on the screen
for checking.
In the analog mode, the currently selected channel
number and the audio mode are displayed.
1 Display the channel number and the audio mode.
Press INFO button on the remote control.
The currently selected channel number and the audio
mode are displayed at the top right of the screen.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
13
AUTO
1
5
2
6
0
3
4
7
-
8
CC
To clear the display, press INFO button again.
9
SAP
P.MODE
CH+
In the digital mode, the detailed information for the
currently selected channel such as the program
GUIDEe is displayed.
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
Display the detailed information for the channel.
Every time you press INFO button, the display mode
will be switched as below.
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
INFORMATION
14.1
DTV-AIR
ENCODE
17:00-18:30
9.2
1
2
3
D.MENU
A-B
REPEAT
America Masters
4
5
6
ENGLISH
1/3 CC
SLOW
PLAY/ENTER
Satchmo: The Life of Lauis
Armstrong A self-taught
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
The following information is displayed in the INFO mode.
(1) Program air time
(2) Channel number
(3) Closed caption
(4) Channel title
(5) Audio language
(6) Program content
NOTES:
When the program guide is displayed in more than 6 lines, use VOL+/-
button and scroll for reading.
"No description provided" is displayed when the program guide is not
provided.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Video menu
SETTING VIDEO
1 Press MENU button. The main menu screen will appear.
2 Press VOL+/- button to
0101
select VIDEO Option,
then press CH- button
VIDEO
to enter.
CONTRAST
BRIGHTNESS
COLOR
SHARPNESS
TINT
80
80
50
50
0
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
7
-
8
CC
3 Press CH+/- to select the desired option, then press
VOL+/- to adjust.
9
SAP
P.MODE
CH+
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
Contrast
CH.LIST FAV.LIST
SIZ
This will adjust the intensity of bright parts in the picture but keep
the dark parts unchanged.
SETUP PAUSE/STEP SUBTITLE
STOP
REV
Brightness
PREV
FWD
NEXT
This will adjust the light output of the complete picture, which will
mainly affect the darker areas of the picture.
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
Color
ANGLE
TITLE/PBC
SEARCH
D.CALL
This will adjust the saturation level of the colors to suit your
personal preference.
AUDIO PROGRAM ZOOM
Sharpness
10+
CLR
This will adjust the sharpness of fine details in the picture.
Tint
Allows you to select the color mix (Tint) of the picture.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio menu
SETTING AUDIO
1 Press MENU button. The main menu screen will appear.
2 Press VOL+/- button to
0101
select AUDIO Option,
then press CH- button
AUDIO
to enter.
VOLUME
20
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
3 Press CH+/- to select
the desired option, then
press VOL+/- to adjust.
7
-
8
CC
9
SAP
P.MODE
CH+
Volume
This will adjust the sound output level.
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual time setting
EXAMPLE: Setting the time to "8:30 AM"
You must set the time manually
for ON/OFF Timer.
TO SET TIME
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
select TIME option,
0101
TIME
then press CH- button
to enter the submenu.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
TIME
TIMER OFF
TIMER ON
--:-- AM
--:-- AM
--:-- AM
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
3 Press CH+/- button to
select TIME, then press
CH+/- button to select
"--:--","AM";
7
-
8
CC
9
SAP
P.MODE
press VOL+/- button to
set the value & AM &PM.
CH+
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
4 Press MENU until the MENU screen disappears.
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
NOTE:
After a power failure or disconnection of the power, the
time will get lost. In this case, reset the preset time.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the ON/OFF timer
This feature allows you to have the
TV automatically turn on/off at a
predetermined time. If you program
SETTING THE TIMER ON
The ON/OFF TIMER, the TV will turn
on/off at the time your predetermined.
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
select TIME option,
0101
then press CH- button
to enter the submenu.
TIME
TIME
--:-- AM
--:-- AM
--:-- AM
TIMER OFF
TIMER ON
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
3 Press CH+/- button to
select TIME ON, then
press CH+/- button to
select "--:--","AM";
press VOL+/- button to
set the value.
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
CH+
VOL
MENU
VOL
+
4 Press MENU until the MENU screen disappears.
_
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
SETTING THE TIMER OFF
FWD
NEXT
D.MENU
A-B
REPEAT
1 Press MENU. The main menu screen will appear.
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
2 Press VOL+/- button to
select TIME option,
0101
AUDIO PROGRAM ZOOM
TIME
then press CH- button
10+
CLR
to enter the submenu.
TIME
TIMER OFF
TIMER ON
--:-- AM
--:-- AM
--:-- AM
3 Press CH+/- button to
select TIME OFF, then
press CH+/- button to
select "--:--","AM";
press VOL+/- button to
set the value.
4 Press MENU until the MENU screen disappears.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
SETTING THE NTSC CAPTION
This allows you to configure the way you choose to view
the captioning.
1. Press the MENU button and then use VOL+/- button to select the
FUNCTION menu.
2. Press CH- button to enter,
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
0101
then press CH+/- button
to select NTSC CAPTION.
Q.VIEW
INFO
MUTE
FUNCTION
LANGUAGE
ENGLISH
ON
C1
3.Then use VOL+/- button to
select caption: OFF,C1, C2,
C MUTE,TEXT1, TEXT2.
1
5
2
6
0
3
4
BLUE SCREEN
NTSC CAPTION
PARENTAL LOCK
7
-
8
CC
9
SAP
You can also press CC
button on the remote
control to select the
desired caption.
P.MODE
CH+
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
4. When you are satisfied with
your choice, press MENU
button to return to the
previous menu.
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
CAPTION
SLOW
PLAY/ENTER
The term for the words that scroll across the bottom of the TV
screen; usually the audio portion of the program provided for
the hearing impaired.
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
TEXT
10+
CLR
The term for the words that appear in a large black frame and
almost cover the entire screen; usually messages provided by
the broadcaster.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
An age limitation can be set to
forbid children to see and hear
violent scenes or pictures for
adults, etc. The TV Corresponds
TO REGISTER PASSWORD
1 Press MENU. The main menu screen will appear.
to "TV RATING" and "MOVIE RATING".
to use the parental control function,2 Press VOL+/- to select
you must register a password.
0101
FUNCTION, then press
CH- to enter the submenu.
FUNCTION
ENGLISH
LANGUAGE
BLUE SCREEN
NTSC CAPTION
PARENTAL LOCK
ON
C1
3 Press CH+ to select
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
PARENTAL LOCK,
then press VOL+ to
enter the submenu.
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
7
-
8
PLEASE ENTER PASSWORD
####
CC
4 Enter the password (4
digits) using the number
buttons(0-9).
9
SAP
P.MODE
CH+
The TV is set up with the
initial password 0000.
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
0101
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
PARENTAL LOCK
FWD
NEXT
5 After inputting password
accurately, Press CH+/-
to select the desired item.
PARENTAL LOCK
OFF
D.MENU
A-B
REPEAT
PARENTAL GUIDEE
MPAA RATING
NO RATING
SLOW
PLAY/ENTER
UNBLOCK
UNBLOCK
VIDEO
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
NOTES:
If you forget the password, you cannot set the Parent Control.
To avoid forgetting the password, write it down and keep it in a
safe place.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
TO CHANGE PASSWORD
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- to select
FUNCTION, then press
0101
FUNCTION
CH- to enter the submenu.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
LANGUAGE
ENGLISH
BLUE SCREEN
NTSC CAPTION
PARENTAL LOCK
ON
C1
Q.VIEW
INFO
MUTE
3 Press CH+ to select
PARENTAL LOCK,
then press VOL+ to
enter the submenu.
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
PLEASE ENTER PASSWORD
####
CH+
4 Enter the password (4
digits) using the number
buttons(0-9).
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
5 Press CH+ to select
CHANGE PASSWORD,
then press VOL+ to
enter the submenu.
PREV
FWD
NEXT
0101
D.MENU
A-B
REPEAT
PARENTAL LOCK
SLOW
PLAY/ENTER
PARENTAL GUIDEE
MPAA RATING
NO RATING
VIDEO
ANGLE
TITLE/PBC
SEARCH
D.CALL
UNBLOCK
UNBLOCK
AUDIO PROGRAM ZOOM
CHANGE PASSWORD
10+
CLR
6 Enter the new password using
the number buttons(0-9).
ENTER A NEW PASSWORD
####
7 Enter again the new password.
PLEASE INPUT AGAIN
####
NOTES:
If you forget the password, you
cannot set the Parent Control.
To avoid forgetting the password,
write it down and keep it in a safe
place.
8 Press MENU until the MENU screen disappears.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
TO SET PARENTAL CONTROL ON/OFF
1 Enter the PARENT CONTROL menu.
2 press CH+/- button to
select PARENTAL LOCK,
0101
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
press VOL+/- button to
set ON or OFF.
PARENTAL LOCK
Q.VIEW
INFO
MUTE
PARENTAL LOCK
PARENTAL GUIDE
MPAA RATING
NO RATING
OFF
UNBLOCK
UNBLOCK
1
5
2
6
0
3
4
3 When you are satisfied
with your choice, press
MENU button to return to
the previous menu.
VIDEO
7
-
8
CC
9
SAP
P.MODE
CH+
TO SET PARENTAL GUIDE
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
1 Enter the PARENT CONTROL menu.
CH-
CH.LIST FAV.LIST
SIZ
2 press CH+/- button to
select PARENTAL GUIDE,
press VOL+/- button to
SETUP PAUSE/STEP SUBTITLE
STOP
REV
0101
PREV
FWD
NEXT
PARENTAL LOCK
enter the submenu.
D.MENU
A-B
REPEAT
PARENTAL LOCK
PARENTAL GUIDE
MPAA RATING
NO RATING
OFF
SLOW
PLAY/ENTER
3 press CH+/-/VOL+/- button
UNBLOCK
UNBLOCK
VIDEO
to set the desired ratings.
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
4 When you are satisfied
with your choice, press
MENU button to return to
the previous menu.
10+
CLR
RATING
ALL FV
D
L
S
V
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
Ratings for Television programs
including made-for-TV movies :
TV-Y (All children)
TV-Y7 (Children 7 years older)
TV-G (General audience)
(
: BLOCK)
TV-PG (Parental GUIDEance suggested)
TV-14 (Parents strongly cautioned)
TV-MA (Mature audience only)
To use the TV after Parent Control is
activated.
TV Rating Children:
ALL (Age) (applies to TV-Y, TV-Y7)
FV (Fantasy Violence) (applies to TV-Y7)
When the program applied to the Parental
Control, setting is received, enter the
password. When the password is entered
correctly the protection will be temporarily
overridden.
TV Rating General:
ALL (Age)
(applies to TV-G, TV-PG, TV-14, TV-MA)
D (Dialogue - sexual dialogue) (applies to TV-PG, TV-14)
NOTE:
The Parental Control function is activated only on
programs and tapes that support the rating.
L (Language - adult language) (applies to TV-PG, TV-14, TV-MA)
S (Sex - sexual situations)
V (Violence)
(applies to TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14, TV-MA)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
TO SET THE MPAA RATING
1 Enter the PARENT CONTROL menu.
2 Press CH+/- button to
select MPAA RATING,
0101
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
PARENTAL LOCK
then press VOL+ button
Q.VIEW
INFO
MUTE
to enter the submenu.
PARENTAL LOCK
PARENTAL GUIDE
MPAA RATING
NO RATING
OFF
UNBLOCK
UNBLOCK
1
5
2
6
0
3
4
VIDEO
7
-
8
CC
9
SAP
3 Press CH+/- button to select
P.MODE
the desired rating.
CH+
Rating for Movies previously shown in theaters:
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
Movie Rating
CH-
MPAA RATING
NR
G
(Permits all programs)
(General audience)
CH.LIST FAV.LIST
SIZ
MPAA-X
MPAA-NC-17
MPAA-R
MPAA-PG-13
MPAA-PG
MPAA-G
PG
(Parental GUIDEance suggested)
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PG-13 (Parents strongly cautioned)
(Restricted)
NC-17 (No one 17 and under admitted)
(Adult only)
R
PREV
FWD
NEXT
X
D.MENU
A-B
REPEAT
MPAA-NR
(
: BLOCK)
SLOW
PLAY/ENTER
If you set PG-13 : G and PG movies
will be available , PG-13, R, NC-17
and X will be blocked.
SEARCH
D.CALL
ANGLE
TITLE/PBC
AUDIO PROGRAM ZOOM
10+
CLR
4 Press VOL+/- button to select delete or
.
5 Press MENU until the MENU screen disappears.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Closed caption
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display closed captioned television programs. Closed captioning
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.
Captions: This closed caption mode will display text on the
screen in English or another language (depending on the set-
ting of the closed captions).
Generally, closed captions in English are transmitted on captions
CC 1 and closed captions in other languages are transmitted on
Captions CC 2.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
Text: The text closed caption mode will usually fill the screen
with a programming schedule or other information.
After selecting a closed caption mode, it will stay in effect until it
is changed, even if the channel is changed.
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
If the captions signal is lost due to a commercial or a break in
the signal, the captions will reappear when the signal is received
again. If the channels are changed, the captions will be delayed
approximately 10 seconds. The captions will appear in places
on the screen where they will least interfere with the picture,
usually on the bottom of the screen. News programs will usually
show three-line closed captions which scroll onto the screen.
Most other shows provide two or three lined captions placed
near the character who is speaking so the viewer can follow the
dialogue. Words in italics or underlined describe titles, words in
foreign languages or words requiring emphasis. Words that are
sung usually appear enclosed by musical notes.
CH+
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
For television programs broadcasting with closed captions, look
in your TV GUIDE for the closed captions symbol (CC).
SLOW
PLAY/ENTER
SEARCH
D.CALL
ANGLE
TITLE/PBC
AUDIO PROGRAM ZOOM
10+
CLR
NOTES:
When selecting closed captions, the captioning will be delayed approximately 10 seconds.
If no caption signal is received, no captions will appear, but the television will remain in the caption mode.
Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with
closed captioning, especially with live programs. This is because during live programs, captions are also
entered live. These transmissions do not allow time for editing.
When captions are being displayed, on-screen displays, such as volume and mute may be hided. If the OSD
display appears, the closed caption will disappear, when the OSD disappear, the Closed Caption will appear again.
Some cable systems and copy protection systems may interfere with the closed captioned signal.
If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or
may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception
or use an outdoor antenna.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV setup menu
SETTING CLOSED CAPTION MODE
In DTV mode
1 Press MENU. The main menu screen will appear.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
0101
Q.VIEW
INFO
MUTE
2 Press VOL+/- button to
DTV SETUP
select DTV SETUP.
1
5
2
6
0
3
4
then press CH- button
to enter the submenu.
DTVCC
DAYLIGHT SAVING
TIME ZONE
OFF
ALASKA
7
-
8
CC
ATSC PARENTAL LOCK
9
SAP
P.MODE
3 Press CH+/- button to
select DTV CC.
CH+
It only appears when the
broadcasting signal bears.
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
4 Press VOL+ button and
then press CH+/- button
to select CAPTION MODE.
CH-
CH.LIST FAV.LIST
SIZ
0101
SETUP PAUSE/STEP SUBTITLE
STOP
REV
DTV SETUP
PREV
FWD
NEXT
5 Press VOL+ button and
then press VOL+/- button
to set the CLOSED CAPTION
"OFF"or "ON".
CAPTION MODE
USER SETTING
DTV CAPTION STYLE
BROADCAST
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
When setting on, the DTV
CC option will be available.
AUDIO PROGRAM ZOOM
0101
10+
CLR
DTV SETUP
6 Press CH+/- button to
select DTV CC and press
VOL+/- button to set
the desired service.
CLOSED CAPTION
DTV CC
OFF
SERVICE1
SETTING DTV CC
This allows you to configure the way you choose to view the
digital captioning.
Select one of the digital service channels made available by
the caption provider.
There are 6 standard services. Service 1 is designated as the
Primary Caption Service. This service contains the verbatim,
or near-verbatim captions for the primary language being
spoken in the accompanying program audio.
Service 2 is designated as the Secondary Language Service.
This service contains captions in a secondary language which
are translations of the captions in the primary Caption Service.
The other service subchannels are not pre-assigned. It is up
to the discretion of the individual caption provider to utilize
the remaining service channels.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV setup menu
SETTING THE CC USER SETTING
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
select DTV SETUP.
0101
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
DTV SETUP
then press CH- button
Q.VIEW
INFO
MUTE
to enter the submenu.
DTVCC
DAYLIGHT SAVING
TIME ZONE
OFF
ALASKA
1
5
2
6
0
3
4
ATSC PARENTAL LOCK
3 Press CH+/- button to
select DTV CC.
7
-
8
CC
9
SAP
P.MODE
CH+
4 Press VOL+ button and
then press CH+/- button
to select USER SETTING.
0101
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
DTV SETUP
CH-
CH.LIST FAV.LIST
SIZ
CAPTION MODE
USER SETTING
DTV CAPTION STYLE
5 Press VOL+/- button to
set "BROADCAST"or
"CUSTOM".
BROADCAST
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
SETTING THE DTV CAPTION STYLE
The DTV caption style function lets you change the caption
size and font style.
SEARCH
D.CALL
ANGLE
TITLE/PBC
AUDIO PROGRAM ZOOM
When "USER SETTING" is set to CUSTOM, you can set
the following items.
10+
CLR
1 Press CH+/- button to
0101
select DTV CAPTION
DTV SETUP
STYLE.
CAPTION MODE
USER SETTING
BROADCAST
DTV CAPTION STYLE
2 Press VOL+ button to
enter the submenu.
3 Press CH+/- button to
select the desired option.
0101
DTV SETUP
STYLE2
4 Press VOL+/- button to
STYLE
SIZE
LARGE
WHITE
SOLID
NONE
adjust the option.
TEXT COLOR
TEXT OPACITY
EDGE TYPE
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV setup menu
SETTING THE DTV CAPTION STYLE(continue)
Style
Select this option to select the font style of caption display
according to your own preference.
Press the VOL+/- button to select Style1, Style2, Style3,
Style4,Style5, Style6, Style7, Style8.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
Size
Select this option to select the size of caption display according
to your own preference.
1
5
2
6
0
3
4
7
-
8
Press the VOL+/- button to select Small, Standard or Large ,
CC
9
SAP
P.MODE
CH+
Text color
Select this option to select the text color or the opacity of the text
box of caption display according to your own preference.
Select a color and one of the opacity options.
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
Text Opacity: Specify the opacity for the text color.
BG (Background) Color: Select a background color.
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
BG (Background) Opacity: Select the opacity for the
D.MENU
A-B
REPEAT
background color.
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV setup menu
SETTING THE DAYLIGHT SAVING
Daylight saving time is automatically set by specially
broadcasted signals.
This menu item allows you to disable the automatic
setting of daylight saving time. This is useful if you live
in an area or state where daylight saving is not applied,
but you receive channels from other areas where daylight
saving signals are broadcasted.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
1 Press MENU. The main menu screen will appear.
7
-
8
CC
9
SAP
2 Press VOL+/- button to
select DTV SETUP option,
P.MODE
0101
CH+
then press CH- button
to enter.
DTV SETUP
VOL
MENU
VOL
+
_
DTVCC
DAYLIGHT SAVING
TIME ZONE
ATSC PARENTAL LOCK
OFF
ALASKA
OK
SLEEP
GUIDE
CH-
3 Press CH+/- button to
CH.LIST FAV.LIST
SIZ
select DAYLIGHT SAVING,
then press VOL+/- button
to select ON for automatic
clock correction for daylight
saving time, based on
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
specially broadcasted signals.
Select OFF to disable automatic
clock correction based on the
specially broadcasted signals.
SLOW
PLAY/ENTER
SEARCH
D.CALL
ANGLE
TITLE/PBC
AUDIO PROGRAM ZOOM
SETTING THE TIME ZONE
This function allows you to select your local time zone.
10+
CLR
Broadcasted time information will correct the clock display
for your local time.
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
0101
select DTV SETUP option,
then press CH- button
to enter.
DTV SETUP
DTVCC
DAYLIGHT SAVING
TIME ZONE
ATSC PARENTAL LOCK
OFF
ALASKA
3 Press CH+/- button to
select TIME ZONE option.
4 Press VOL+/- button to
select your viewing area
time zone: NEWFOUNDLAND,
ATLANTIC, EASTERN, CENTRAL,
MOUNTAIN, PACIFIC, ALASKA,
HAWAII, or SAMOA
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV setup menu
SETTING ATSC PARENTAL LOCK
1 Press MENU. The main menu screen will appear.
2 Press CH+/- button to
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
0101
Q.VIEW
INFO
MUTE
select DTV SETUP.
DTV SETUP
then press VOL- button
to enter the submenu.
1
5
2
6
0
3
4
DTVCC
DAYLIGHT SAVING
TIME ZONE
OFF
ALASKA
7
-
8
CC
ATSC PARENTAL LOCK
9
SAP
3 Press CH+/- button to
select ATSC PARENTAL
LOCK.
P.MODE
CH+
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
4 Enter the password (4
digits) using the number
buttons(0-9).
The TV is set up with the
initial password 0000 and
enter next submenu.
CH-
CH.LIST FAV.LIST
SIZ
ENTER CODE ####
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
0101
SLOW
PLAY/ENTER
DTV SETUP
ANGLE
TITLE/PBC
SEARCH
D.CALL
VERSION
[RRT0]
AUDIO PROGRAM ZOOM
DIMENSION
CLEAR RRT
10+
CLR
Version
V-chip broadcast source version.
Dimension
Use when viewing non-TV broadcast programming.
Clear RRT
CLEAR Rating Table (RRT) information:
This will clear V-Chip ratings table version.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
GUIDE
- This activates some, but not all, electronic program guides
(EPG data) when it is used and transmitted by some DTV station
providers. It is only supported when receiving DTV channels.
GUIDE
1/3 >>
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
03:00 ---04:00
Q.VIEW
INFO
MUTE
Moving picture 480i 4:3
1
5
2
6
0
3
4
04:00 ---05:00
Moving picture 480i 4:3
7
-
8
CC
9
SAP
P.MODE
CH+
1. Press the GUIDE button to switch on GUIDE.
2. Press the CH+/- or VOL+/- button to select desired program,
then press the OK button to display the selected program.
3. Press the GUIDE or EXIT button again to switch off GUIDE and
return to TV viewing.
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
FAVORITE CHANNELS LIST
TITLE/PBC
SEARCH
D.CALL
ANGLE
You can create your own Favorite List. Use the FAV.LiST
button on the remote control when a channel is highlighted
and then you can add or delete the channel to/from the
Favorite List.
AUDIO PROGRAM ZOOM
10+
CLR
FAVORITE CHANNELS
14.3
ATSC-3
[ENTER KEY] ADD CURRENT CH TO
SKIP ON
Press the FAV.LIST button open the favorite channel
list, press CH+/- button to select the channel and press
OK button to confirm.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
QUICKLY VIEW
This function enables quick swap to the last watched program.
1 Suppose the channel number you used
just now is 8 and the channel number
you are using is 18 (as shown in the figure).
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
2 If you want to return to the last watched
program channel 8, you can simply press
the Q.View button.
1
5
2
6
0
3
4
7
-
8
CC
3 If you want to return to channel 18, press
the button again. Use this function, you
can easily change between the channel
you are using and the channel you used
last time.
9
SAP
P.MODE
CH+
VOL
MENU
VOL
+
_
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
STOP
REV
SLEEP TIMER
PREV
FWD
NEXT
To set the TV to turn off after a preset amount of time, press SLEEP
button repeatedly to select
D.MENU
A-B
REPEAT
the number of minutes. First the
OFF option appears on the screen,
followed by the following sleep
SLOW
PLAY/ENTER
SEARCH
D.CALL
ANGLE
TITLE/PBC
timer options:
AUDIO PROGRAM ZOOM
(5 MINUTE,10 MINUTE, 15 MINUTE,
30 MINUTE,45 MINUTE, 60 MINUTE,
10+
CLR
SLEEP OFF
90 MINUTE,120 MINUTE,
180 MINUTE, 240MINUTE,OFF)
To confirm the sleep timer setting,
press SLEEP and the remaining
time will be displayed for a few
seconds. To cancel the sleep timer,
Press SLEEP repeatedly until the
display turns to OFF.
PICTURE MODE
Every time press the P.MODE button to
switch desired picture quality mode.
Four kinds of picture modes
(i.e., "MILD","STANDARD","VIVID" ,
"CUSTOM", ) can be selected in turn.
MILD
35
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Features
Basic Playback
Preparations
Stop playback
1. Press STOP
button to go to stop mode, the TV
Press the DVD/TV button on the remote control or
the TV to enter the DVD status.
screen will show the start logo. For some discs the
player can recall the location where stopped, such
as DVDs and audio CDs.
Basic playback
2. Press PLAY/ENTER to playback to resume play-
back from the location where playback is stopped
or from the beginning of the disc.
1. Press OPEN/CLOSE to open the disc tray,
place a disc in the disc tray.
3. Press STOP twice to stop completely.
There are two different disc sizes. Place the
disc in the correct GUIDE on the disc tray. If the
disc is out of the GUIDE, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.
Previous and Next
During Playing, pressing the PREV
key will
restart the current chapter and skip chapters
backwards with each subsequent press until the
start of the disc is reached.
2. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
Each press of NEXT
key during playing will
Some discs do not start automatically. Press
PLAY/ENTER to start playback.
skip the current chapter and play the next one.
3. Some discs may start playback with a menu. Use
the cursor buttons on the remote control to select
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu
option directly. Many DVDs will not allow this during
start-up.
Fast forward and Fast reverse
1. Press FWD
Each time the FWD
to fast forward through the disc.
button is pressed, the
fast forward motion speed changes.
2. Press PLAY/ENTER to resume normal playback.
Pause playback
3. Press REV
Each time the REV
to fast reverse through the disc.
button is pressed, the
1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
2. Press PLAY/ENTER to resume normal playback.
fast reverse motion speed changes.
4. Press PLAY/ENTER to resume normal playback.
Single step playback
1. When paused, press PAUSE/STEP continuous
to single step forward to the next frame in the
video.
2. Press PLAY/ENTER to resume normal playback.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Features(Continued)
Advanced Playback
IMPORTANT NOTE:
All described functions are for DVD discs. If you play other format discs, the operation
and on screen display will be different.
PROGRAM
SUBTITLE
Press "SUBTITLE ", the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the original
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages display-
ed on screen.
When playing discs, press "PROGRAM" to enter
program mode. Press the digit buttons to select the
program number that you want. When finished move
the cursor to select "START" . This will start the
program playback.
SEARCH
REPEAT
Press "SEARCH" once to display the search
menu. Press the button again to select. Press
the program number buttons to input the item
you require. Press PLAY/ENTER to confirm.
Press " REPEAT " and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel this function.
SLOW
A-B
Press SLOW to play a disc in slow forward. Each
time the SLOW button is pressed, the slow
motion speed changes.
Press " A-B " to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
Press PLAY/ENTER to resume normal playback;
Note: This function does not work for CD and MP3.
ANGLE
TITLE/PBC
When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
different angles,for example,front, side, whole view
and exterior scene).
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons
to select the item you prefer.
AUDIO
D.MENU
Press this key can change the mode of audio.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Press this button to cycle between Mono Left, Mono
Right, Mix-Mono and Stereo.
Press this key to display root menu,select item
according to your preference. (This function will work
with a DVD having a multi-layer menu.)
Note: When press this button continuously, you must
above 3 seconds interval.
D.CALL
Pressing this key will cycle through "Title Elapsed",
"Title Remain", "Chapter Elapsed", "Chapter Remain"
and "Display off ".
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Playback Functions
JPEG DISC PLAYBACK
When a disc containing standard JPEG picture files is inserted into the player, a
navigation menu will be displayed automatically. Use the UP and DOWN cursor
buttons to select a file then press PLAY/ENTER. The slide show will commence.
Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the
current picture. Press PLAY/ENTER to resume normal playing.
A JPEG disc contains JPEG (.jpg) format picture information that can be decoded
by a micro-computer software and displayed through the video output interface or on
the television screen.
This function has many applications. For example one can save files from a scanner
or digital camera in the JPEG format, record these on a CD-R disc and present them
to an audience through this player.
The JPEG format is a convenient method to store images in a small amount of
memory space, and is ideal for archiving information.
MP3 PLAYBACK
When playing an MP3 disc, a navigation menu will be displayed automatically. In the menu, use UP
or DOWN cursor buttons to choose the folder, then press PLAY/ENTER to enter the folder. Use the
UP and DOWN cursor buttons to select the file and press PLAY/ENTER. Pressing the LEFT cursor
button will take you to the previous screen/menu.
SCREEN SAVER FUNCTION
This unit employs a screen saver mode to help protect the tube during static video pictures. This can
be turned off on the GENERAL SETUP PAGE.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
General Setup Page
..General Setup Page..
ANGLE MARK: Users can select a particular
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
LB
On
ENG
.
camera angle when playing a DVD which offers
On
Off
multiple angles.
This item allows you to set Angle Mark ON or OFF.
On
Screen Saver Off
On Screen Display (OSD) Language: Users
can select on-screen display language.
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
On
ENG
English
Spanish
On
Screen Saver Off
SPDlF OUTPUT MODE: Coaxial audio output modes
when connecting to external audio equipment.
..General Setup Page..
TV Display
Angle Mark
LB
On
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is output
through the back-paneI connections for 2-CH audio out or
5.1 CH audio out.
2. SPDlF/RAW or SPDIF/PCM: This mode allows a coaxial
output cable to be connected to external equipment containing
various audio processors that decode various synthesized and
discrete audio information for greater effects.
OSD Lang
Spdif Output
Caption
ENG
Spdif Off
On
Spdif / Raw
Spdif / Pcm
Screen Saver Off
..General Setup Page..
CAPTIONS: This function allows you to display or
hide the caption.
TV Display
Angle Mark
LB
On
OSD Lang
Spdif Output
Captions
ENG
On
On
Off
Screen Saver Off
SCREEN SAVER: If the screen saver is on, then
there will be an animated picture of DVD on the
screen whenever the DVD player is idle for more
than 3 minutes .
..General Setup Page..
TV Display
Angle Mark
LB
On
OSD Lang
Spdif Output
Caption
ENG
On
Screen Saver Off
On
Off
40
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discswhichareinsertedandplayed.
SETUP
..Preference Page..
Password
Default
PLAY/ENTER
PASSWORD CHANGE:
You can change your password by
entering 4 digits. You must confirm
the 4 digits before the new password
can be accepted.
..Preference Page..
Password
Default
Change
SETUP
Old Password
New Password
Confirm PWD
PLAY/ENTER
NOTE:If you forgetyour password
or a password is accidentally set
enter 2881 as the password. This
will enable you to regain control.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
DEFAULT: Resets all settings
SETUP
..Preference Page..
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.
Password
Default
Reset
PLAY/ENTER
Note:
Some functions may not be available depending on the type of disc.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
The following discs can be played:
You cannot play discs other than those listed above.
You cannot play non-standardized discs, even if they may be labelled as above.
The performance of CD-R or CD-RW disc depends on the way the disc was burned. In a few cases,
their performance may not be consistant or may not even operate at all.
This DVD Player is designed and manufactured according to the Region Management
Information that is recorded on a DVD disc. If the Region number described on the DVD disc
does not correspond to the Region number of this DVD Player, this DVD player will not play
that disc.
This Region number of this DVD Player is .
1
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Protection and DVD Characteristics
Compare DVD disc with other discs:
DVD
LD
SVCD
VCD
CD
Digital/
MPEG I
Encode
method
Digital/MPEG
Digital
Digital
Analog
Single- Double Single- Double-
side
-side
side
side
650MB
650MB
650MB
Capacity
single- single double- double-
layer
4.7G
-layer layer
layer
17G
8.5G
9.4G
Single-side
60 minutes
double-side
120 minutes
133
242
266
484
45 minutes 74 minutes 74 minutes
Playing Time
Disc diameter
minutes minutes minutes minutes
12cm/8cm
30cm/20cm
12cm
12cm
12cm/8cm
No more than
430 line
Horizontal
resolution
No more than
250 line
No more than
350 line
More than 500 line
Picture
proportion
One kind
One kind
4 kinds
Multiple kinds
32 kinds
One kind
16 kinds
at most
Subtitle
4 kinds
at most
4 kinds
at most
Language
2 kinds
2 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
Sound quality
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
PICTURE
SOUND
The aerial direction and connection
Picture with snow
Noise
This is called "ghosting" and can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Double or Triple Image
Normal
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Noise
Disturb
Volume Sound mute
Normal
No Picture
No color
No sound
Ensure that the power supply is connected to
the TV set and turned on. Also ensure that the
TV set is not in "Listen Mode" or that the
brightness and contrast are not turned down.
No sound
Adjust color control
Adjust channel again
Normal volume
Normal or Weak Volume
Scramble
Color Purity is a fault that can be caused by moving the
TV set, placing magnets near the TV screen or turning
on/off house hold appliances such as vacuum cleaners
near the TV set. Turn the TV off with the main power
switch for 15 minutes. When the power is turned on
again the TV set will automatically degauss the picture.
In severe cases leave the TV set turned off over night.
Color Spot
Normal volume
Note:
1.If the fault can not be corrected using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as TV set has dangerous voltages inside that may cause a fatality or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The specifications offered you here are for reference only. With product improvement
there may be some differences between the description and the final product.
13 "
20 "
14 "
ATSC
13
14
90
85
85
13 "
368.8 mm x 378.6 mm x 378.8mm
420 mm x 382 mm x 385mm
14 "
499.4 mm x 483.5 mm x 481.7mm
20 " Round
20 " pure Flat
499.9 mm x 483.5 mm x 481.7mm
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
The registered logos shown in this manual, such as those on the page showing playable discs
contents, are those of the license holders and the associated trademarks holders. They are
shown for informational purposes only and do not indicate content or capability in all software,
nor with all hardware.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
0090500359A
02
Download from Www.Somanuals.com. All Manuals Search And Download.
|