Curtis Car Stereo System RCD641 User Manual

Table of Contents  
Page No  
PRECAUTIONS ----------------------------------------------------------------------------------------- E-2  
IMPORTANT SAFETY INSTRUCTION ------------------------------------------------------------ E-3  
WARNING ----------------------------------------------------------------------------------------------- E-6  
INSTALLATION ----------------------------------------------------------------------------------------- E-7  
OPERATING ELEMENTS --------------------------------------------------------------------------- E-8  
SETTING UP AND CONNECTING THE STEREO SYSTEM-------------------------------- E-9  
CLOCK AND TIMER --------------------------------------------------------------------------------- E-10  
BASIC OPERATION --------------------------------------------------------------------------------- E-10  
LISTENING TO THE RADIO ---------------------------------------------------------------------- E-11  
PLAYING CD’ S ----------------------------------------------------------------------------------------- E-11  
CARE AND MAINTENANCE ---------------------------------------------------------------------- E-12  
TROUBLE SHOOTING GUIDE --------------------------------------------------------------------- E-12  
SPECIFICATIONS ------------------------------------------------------------------------------------- E-13  
STEREO HI-FI SYSTEM  
With CD PLAYER  
And AM/FM PLL SYNTHESIZED TUNER  
RCD641  
OWNER’ S MANUAL  
-1-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14. Lightning – For added protection for this product during a lightning storm, or when it is left  
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect  
the antenna or cable system. This will prevent damage to the product due to lightning and  
power line surges.  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the product.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following the operating instructions. Adjust  
only those controls that are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will often require extensive work  
by a qualified technician to restore the product to its normal operation.  
e. If the product has been dropped or damaged in any way.  
15. Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the  
product, be sure the antenna or cable system is grounded so as to provide some protection  
against voltage surges and built-up static charges. Article 810 of the National Electric Code,  
ANSI/NFPA 70, provides information with regard to proper grounding of the must and  
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna-discharge unit, connections to grounding  
electrodes, and requirements for the grounding electrode. (See Figure 2)  
f.  
When the product exhibits a distinct change in performance.  
– This indicates a need for service.  
21. Replacement Parts – When replacement parts are required, be sure the service technician has  
used replacement parts specified by the manufacturer or have the same characteristics as the  
original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE, ANSI/NFPA70  
22. Safety Check – Upon completion of any service or repairs to this product, ask the service  
technician to perform safety checks to determine that the product is in proper operating  
condition.  
23. Heat – The product should be situated away from heat sources such as radiators, heat  
registers, stoves, or other products (including amplifiers) that product heat.  
FCC INFORMATION  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
16. Power Lines – An outside antenna system should not be located in the vicinity of overhead  
power lines or other electric light or power circuits, or where it can fall into such power lines or  
circuits. When installing an outside antenna system, extreme care should be taken to keep  
from touching such power lines or circuits, as contact with them might be fatal.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
17. Overloading – Do not overload wall outlets, extension cords, or integral convenience  
receptacles as this can result in a risk of fire or electric shock.  
Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions:  
18. Object and Liquid Entry – Never push objects of any kind into this product through openings as  
they may touch dangerous voltage points or short-out parts that could result in fire or electric  
shock. Never spill liquid of any kind on the product.  
(1) This device may not cause harmful interference, and  
19. Servicing – Do not attempt to service this product yourself as opening or removing covers may  
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service  
personnel.  
(2) This device must accept any interference received, including interference that may  
cause undesired operation.  
20. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
-4-  
-5-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
INSTALLATION  
RUBBER SLEEVE  
Read the instruction manual before you attempt to use the unit. Handle glass panels with care.  
Consult your dealer or service personnel if you have questions about the installation, operation or  
safety of the unit.  
FOR TABLE TOP  
l
Put the main unit and the  
SUPPORT PLATE  
speaker on a piece of soft  
cloth, which for preventing  
scratches the unit front  
panel.  
Make sure unit is plugged into an 110V-127V outlet. Using higher voltage outlets could cause the  
unit to malfunction or catch fire. Make sure all electrical connections (including extensions and inter  
connectors) are properly made.  
Turn unit off before unplugging it from power source.  
l
Use your finger press on the  
decoration part, which are at  
the groove of the main unit rear  
cabinet and slide down to  
release away it from the  
groove.  
SLIDE DOWN THE DECORATING  
PART TO REMOVE FROM MAIN  
UNIT REAR CABINET  
Do not expose to temperatures above 95 ºF.  
Do not place unit near heaters or in areas subjected to direct sunlight.  
90  
60  
Place unit where there is good air circulation.  
Protect unit from dust, moisture, water and other liquids.  
30  
l
l
l
Insert the support plate into the groove.  
Do not place unit near TVs, speakers and other objects that generate strong magnetic fields.  
Do not clean with strong chemical agents.  
Do not grease or oil components, running mechanisms, etc. CD player is designed to be  
maintenance-free.  
Do not attempt to service this unit yourself. Take to an approved service center if repairs are  
necessary.  
Do not operate unit if it is not working normally or has been damaged in any way. Turn unit off,  
unplug it from the power source and consult service personnel.  
Do not remove any fixed cover. This will increase the chance of electrical shock.  
Do not leave unit unattended when in use.  
Slide up the support plate until it is  
locked.  
If you put your equipment on a glass table or a very smooth surface. The main unit and  
speaker box would be easy to move by hand pushing. You could insert the rubber sleeve to  
the bottom of the support plate.  
l
This product is designed both for placing vertically and horizontally. Removing the support  
plate away for horizontal placing. The display can be rotated staying in 1 of 3 kind of viewing  
angle (30º, 60º, 90º) as you like.  
Do not listen to headphones at high volumes.  
Do not obstruct vents on unit.  
FOR WALL MOUNTING:  
Do not attempt to create your own stand for the unit. Use only the included stand.  
Do not push object into any holes, slots or openings on unit.  
Do not allow children to operate unit without adult supervision.  
1.  
Use the wall-mounting template  
supplied with unit to make anchor  
hole marks on the wall. Make  
sure the marks are leveled.  
Screw.  
Erratic performance may occur if unit is used in rooms lit with fluorescent lights.  
CAUTION – This CD player may be used only with the captioned manufacturer’ s stand. Use  
with other stand may result in instability causing possible injury.  
2.  
3.  
Drill 3/16" holes on the marks.  
Insert the plastic anchor supplied  
with unit through the hole and tap  
it until it is flush with the wall.  
Above all  
l
NEVER let anyone, especially children, push anything into holes, slots or any other openings  
in the case this could result in a fatal electric shock.  
4.  
5.  
Inset the screw and tighten the  
screw 3mm sway from the wall.  
l
l
NEVER guess or take chances with electrical equipment of any kind.  
It is better to be safe than sorry!  
Hang the main unit and the  
speakers to the screw.  
Plastic Anchor  
Note: If energy saving lamps (Fluorescent) are used in the  
Same room as the unit erratic operation may occur.  
-6-  
-7-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING ELEMENTS  
SETTING UP AND CONNECTING THE STEREO SYSTEM  
15  
16  
Front view  
1. Display  
Antenna connection  
7
8
1
2
2. Power Indicator  
3. VOL 5 Button  
4. POWER Button  
5. CD DOOR Open/Close Button  
6. VOL 6 Button  
FM: Install the FM Antenna wire connecting  
plate to FM Antenna Terminal (19) and  
tighten it with a screwdriver. Or plug in the  
FM Antenna (optional). If stereo broadcast  
received, the STEREO indicator will be  
displayed on the display (1)  
9
3
10  
11  
4
5
6
12  
13  
14  
7. Remote Sensor  
8. CD Function Button  
9.  
PLAY/PAUSE Button  
AM: This unit is equipped with a built-in directional ferrite antenna, move and rotate the unit for  
10. TUNER/BAND Button  
11. TIMER Button  
best reception.  
17  
18  
12.  
13. STOP  
14.  
/ SEARCH  
Button  
SEARCH / TUNING - Button  
/ TUNING + Button  
Speaker connection  
/
To insert the speaker cables by pushing down the terminal lever of  
Left Speaker Terminal (21) and Right Speaker Terminal (22).  
Please ensure the cables are connected into the speaker  
terminals with the correct polarities. Connect the left speaker to  
the terminals L and the right speaker to the terminals R.  
23  
Left side view  
15. RESET Switch - Reset the unit with a sharp tip  
16. Headphone Jack  
23  
19  
20  
21  
Rear view  
Grey  
LINE IN (AUX IN) connection  
22  
24  
17. Subwoofer Socket  
18. Aux Input Socket  
19. FM Antenna Terminal  
FM 75 ohm Antenna Socket (optional)  
20. AC Power Cord  
1. Connect one end of a RCA plug signal wire (not included) to Aux Input Socket (18) and the other  
end of wire to your home equipment. Make sure the polarity of the right and the left channel is  
correct.  
2. Press the POWER (4) (43) to switch on the unit  
21. Left Speaker Terminal  
3. Press LINE IN (29) on the remote control while display indicates “ LINE” .  
4. Play your home equipment.  
22. Right Speaker Terminal  
23. Wall Mounting Hole  
24. Support Plate  
25  
48  
35  
37  
39  
26  
36  
38  
40  
27  
29  
SUBWOOFER connection  
28  
30  
Remote control  
25. MUTE Button  
26. TUNING - Button  
1. Connect one end of a RCA plug signal wire (not included) to Subwoofer Socket (17) and the  
other end of wire to your subwoofer.  
31  
33  
41  
43  
32  
34  
42  
44  
2. Turn on the unit and your subwoofer.  
3. Play your home equipment.  
27.  
28.  
/
SEARCH Button  
PLAY/PAUSE Button  
AC Outlet  
29. LINE IN (AUX IN) Button  
30. CD Function Button  
31. MODE Button  
46 47  
Mains connection  
45  
This system is designed to operate on AC110V-127V ~60Hz house  
current. Connecting this system to any other power supply could result in  
damage to the unit, which is not covered by your warranty. If this plug will  
not fit into your outlet, you should have your outlet changed by a qualified  
licensed electrician.  
32. EQ Button  
33. RANDOM Button  
34. PRESET/REPEAT Button  
35. TUNING+ Button  
41. ST/MONO Button  
42. CLOCK ADJ. Button  
43. POWER Button  
44. CD DOOR Open/Close Button  
45. Number 0-9 Button  
46. +10 Button  
AC Plug  
36.  
37. VOL  
38. STOP Button  
/SEARCH  
Button  
Button  
1. Unwind the AC Power Cord on the main unit.  
2. Insert the plug into any convenient AC outlet.  
39. TUNER Function Button  
40. BAND Button  
47. PROGRAM Button  
48. VOL  
Button  
As soon as the unit has been connected with the mains voltage, parts of the unit are in operation  
due to the standby function. To switch off the unit completely pull the mains plug.  
-8-  
-9-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK AND TIMER  
LISTENING TO THE RADIO  
CLOCK  
1. While unit is off (still plugged in), press CLOCK ADJ. (42) once. Hour digits will flash.  
2. Press /SEARCH (12,36) and SEARCH (14,27) to select correct hour.  
3. Press CLOCK ADJ. (42) again. Minute’ s digits will flash.  
4. Press /SEARCH (12,36) and SEARCH (14,27) to select correct minutes.  
1. Press POWER (4) (43) to turn unit on.  
2. Press TUNER (10,39) to select radio mode.  
3. Press BAND (10,40) to select AM or FM band.  
4. Press TUNING + (12,35) or TUNING – (14,26) to select the desired station. For automatic  
tuning, press and hold TUNING + (12,35) or TUNING – (14,26) until you approach the desired  
station, then tap the buttons until you reach the station. For manual tuning, press TUNING +  
(12,35) or TUNING – (14,26) briefly and release. The tuner will skip to the next clear station.  
/
/
5. Press CLOCK ADJ. (42) to set time. Digits will stop flashing and clock will start.  
TIMER  
Clock should be set before using timer.  
ST/MONO  
Repeatedly pressing the ST/MONO (41) switches between stereo and mono reception. The stereo  
reception of a station in the FM band is indicated on the display. In case of stereo stations with a  
bad reception (noise infested reception) we recommend switching the tuner to mono reception.  
1. Press MODE (31). TIMER ON indicator will flash.  
2. Press PROGRAM (47). Hour digits will flash.  
3. Press  
4. Press PROGRAM (47). Minute’ s digits will flash.  
5. Press /SEARCH (12,36) and SEARCH (14,27) to select correct minutes.  
/SEARCH  
(12,36) and  
/
SEARCH (14,27) to select correct hour.  
STORING PRESET STATIONS  
1. Tune radio to the desired station.  
/
6. Press PROGRAM (47) to set time for Timer On. To cancel Timer On setting, press MODE (31)  
several times until you reach the Timer On setting mode. Press TIMER (11) to cancel Timer On  
setting.  
7. To set Timer Off, press MODE (31) once. TIMER OFF indicator will flash.  
8. Press PROGRAM (47). Hour digits will flash.  
2. Press PROGRAM (47).  
3. Press PRESET/REPEAT (34) repeatedly to set the preset station number.  
4. Press PROGRAM (47) to store station. To store additional stations, repeat above steps. Unit  
stores 20 FM and 12 AM preset stations.  
9. Press  
10. Press PROGRAM (47). Minute’ s digits will flash.  
11. Press /SEARCH (12,36) and SEARCH (14,27) to select correct minutes.  
/SEARCH  
(12,36) and  
/
SEARCH (14,27) to select correct hour.  
Note: You can also select directly the desired program place by pressing numerical buttons "0-9"  
(45) or "+10” (46) on the remote control.  
/
12. Press PROGRAM (47) to set time for Timer Off. To cancel Timer Off setting, press MODE (31)  
several times until you reach the Timer Off setting mode. Press TIMER (11) to cancel Timer Off  
setting.  
PLAYING CD’ S  
Press POWER (4) (43) to turn unit on and press CD Function button (8,30) to select CD mode.  
Press CD DOOR Open/Close (5,44) and place a CD on the spindle so it locks in place. Press CD  
DOOR Open/Close (5,44) to close door. The number of tracks and the playing time of the CD will  
appear on LCD.  
BASIC OPERATION  
TURNING ON  
LCD will illuminate dimly when unit has been successfully plugged in and power is flowing. Press  
POWER (2,43) to turn unit on. Power On indicator will light up. Select CD (8,30) or TUNER (10,39)  
as the music source. To turn unit off, press POWER again.  
PLAY/PAUSE (9,28) – plays CD. Press  
to resume play.  
PLAY/PAUSE during play to pause; press again  
STOP (13,38) – stops CD play.  
/SEARCH (12,36) and  
VOLUME CONTROL  
Press VOL  
(3,48) and VOL  
(6,37) to adjust the volume level. Press MUTE (25) to turn  
/
SEARCH (14,27) – use to skip to desired track. Hold either  
volume to 0. Press MUTE (25) again to turn sound back on.  
button down to search through a particular track.  
EQ  
PRESET/REPEAT (34) – press to have one track or all tracks play repeatedly. Press again to return  
Press EQ (32) repeatedly to cycle through the equalizer presets. Presets are Flat, Rock, Jazz, Pop  
and Classic.  
to normal play.  
RANDOM (33) – press on remote control during CD play to play tracks in random order. Press  
CHANGING DISPLAY  
again to return to normal play.  
When power is off, press MODE (31) to cycle through the following display options:  
Clock, Timer On setting, Timer Off setting.  
PROGRAMMED PLAY  
Press MODE (31) while a CD is playing to cycle through the following display options:  
Playing Time, Remaining Time, Clock, Timer On setting, Timer Off setting.  
CD player allows you to program up to 16 tracks in a sequence of your choice.  
1. Press PROGRAM (47) while CD play is stopped.  
2. Press  
/SEARCH (12,36) and  
/
SEARCH (14,27) to select the desired song to be  
-10-  
-11-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
programmed.  
AM: The bar antenna is not  
positioned correctly.  
Reposition the unit until best  
reception is obtained.  
3. Press PROGRAM (47) when you have reached the desired song. The track will be stored in  
PROGRAM.  
4. Repeat steps to program additional tracks.  
FM STEREO does not  
appear on display.  
You have tuned to a mono  
station or station too weak.  
Select another FM station.  
5. When programming is complete, press  
track list.  
PLAY/PAUSE (9,28) to play the programmed  
AM or FM, no sound.  
Unit not at Tuner function AM or Press Tuner Function button to  
FM band.  
AM or FM.  
To review programmed tracks, presses PROGRAM (47) repeatedly. Press STOP to clear  
programmed tracks.  
Volume at minimum.  
Increase Volume.  
Compact Disc Player  
CD Player will not play.  
Unit not in CD function mode. Press CD Function button.  
CD is not installed or installed Insert CD with label side up.  
incorrectly.  
Note on CD-R/RW discs  
l
l
l
Because of non-standardized format definition / production of CD-R/RW, playback quality &  
performance are not guaranteed.  
It is not responsible for the playability of CD-R/RW in any case due to recording conditions  
such as PC performance, writing software, media ability and etc.  
Do not attach a seal or label to either side (the record able side or the labeled side) of a  
CD-R/RW disc. It may cause malfunction.  
CD skips while playing.  
Disc is dirty or scratched.  
Wipe disc with cloth or use  
another disc.  
Function inoperative and Built-in microcomputer hand up. Use a sharp tip to press into the  
jammed  
reset hole to reset the built-in  
microcomputer.  
Display no indication or  
abnormal indication  
Built-in microcomputer hand up. Use a sharp tip to press into the  
reset hole to reset the built-in  
Do not load a un-recorded CD-R/RW disc. It will take over 30 seconds to read the disc. The disc  
may be damaged if you try to open the disc compartment while reading the disc.  
microcomputer.  
CARE AND MAINTENANCE  
SPECIFICATIONS  
l
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to contact  
with the shiny, unprinted side of the disc.  
Do not attach adhesive tape, stickers etc., to the disc label.  
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive  
cleaners to clean the disc. If necessary, use to CD cleaning kit.  
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).  
When cleaning the disc, wipe in straight lines from the center of the disc to the edge of the  
disc. Never wipe in circular motions.  
To remove a disc from its storage case, press down on the center of the case and lift the disc  
outs, holding it carefully by the edges.  
Fingerprints and dust should be carefully wiped off the discs recorded surface with a soft  
cloth. Unlike conventional records. Compact disc have no groove to collect dust and  
microscopic debris, so gently wiping with a piece of soft cloth should remove most particles.  
Power source -------------------------------- AC110V-127V ~60 Hz  
DC 3V AA” size/UM-3 x 2 pcs (not included) for remote  
l
l
Handset  
Power consumption ------------------------- 28 Watts  
l
l
Dimension ------------------------------- Unit 340 (W) x 151 (D) x 320 (H) mm (including support plate)  
340 (W) x 102 (D) x 320 (H) mm (without support plate)  
l
l
Speaker 200 (W) x 143 (D) x 320 (H) mm (including support plate)  
200 (W) x 94 (D) x 320 (H) mm (without support plate)  
Tuning range/sensitivity -------------------- AM 530 ~ 1710KHz/2000 µV/m  
FM 87.5 – 108MHz/18uV  
Playback system ------------------------------ Vertical type CD mechanism  
Frequency response ------------------------- 100 – 18,000 Hz  
Power output ----------------------------------- 3.5 Watts @ Maximum per channel  
Speaker impedance -------------------------- 3.2 ohms  
Headphone impedance --------------------- 8 – 32 ohms  
AUX input sensitivity ------------------------- 300 mV  
TROUBLESHOOTING GUIDE  
Should this unit exhibit a problem, check the following before seeking service.  
ACCESSORIES  
Instruction Manual  
Remote Control handset  
Support plate  
1 set  
1 pc  
6 pc  
6 pc  
Wall mounting template  
Screw  
Plastic anchor  
1 pc  
4 pcs  
4 pcs  
Symptom  
Radio  
Possible Cause  
Solution  
Noise or sound distorted Station not tuned properly for  
on AM or FM broadcasts. AM or FM  
FM: Wire antenna is not  
Retune the AM or FM broadcast  
station.  
Extend FM Wire antenna.  
Sleeve For Support plate  
172-401Y10081-CU  
extended.  
-12-  
-13-  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Compact Loader 486244122 User Manual
Cuisinart Oven RTO 20 User Manual
CyClone Server COMPACTPCI 824 User Manual
Delta Electronics Power Supply Series L48DB User Manual
Earthquake Sound Car Speaker EQ8S8 User Manual
Electro Voice Speaker System FRI+152 94 User Manual
Exido Hot Beverage Maker 245 065 User Manual
Field Controls Ventilation Hood TYPE C User Manual
Fujitsu All in One Printer DL3300 User Manual
GE Monogram Refrigerator Side by Side Built In Refrigerators User Manual