C
Specifications
SC 4500 Series
Sit-down Rider
Lift Truck
SC 4500
Series
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SC 4500 Series
1
2
3
4
5
6
7
8
9
Manufacturer
Model
Load Capacity*
Load Center
Power
Operator Type
Tire Type
Wheels (x = driven)
Mast**
Crown Equipment Corporation
SC
lb
in
4510-30
3000
4520-30
3000
4520-35
3500
4540-35
3500
4540-40
4000
Rated to 154 in
Fork Face to Load CG
Electric
24
36 Volts
Sit-down Rider
Cushion
2x / 2
Press-on Solid
Number Front/Rear
Lifting Height
in
in
190
35
11
Free Lift Height†
12 Fork Carriage
13 Forks†††
ITA Class II
36 x 4 x 1.75
30, 39, 42, 45, 48, 54, 60
Standard L x W x T
Optional Lengths
Fork Spread–Min/Max
B°/F°
in
in
in
36 x 4 x 1.5
9/33
36 x 4 x 1.5
36 x 4 x 1.75 36 x 4 x 1.75
9/33
9/33
5 / 5
72.6***
40.3
83
9/33
9.5/36
14 Tilt
degree
15 Headlength
16 Width Overall†††
17 Height
in
in
in
in
in
67.9***
40.3
72.4***
40.3
77.2***
40.3
77.2***
42.3
Standard Tread
Mast Collapsed
Mast Extended†
18
238
58.1
21 Turning Radius
22 Load Distance
23 Aisle Width
24 Speed Travel††
25 Speed Lift††
26 Speed Lower
32 Weight, Less Battery
53.6
58.1
62.7
62.7
Center of Wheel to Fork Face in
14.3***
14.5***
Right Angle Stack
Empty/Loaded
Empty/Loaded
Empty/Loaded
in
Turn Radius + Load Distance + Load Length + Clearance
36V mph
36V fpm
8.5/7.6
90/63
90/90
6149
8.5/7.6
90/63
90/90
5974
8.5/7.5
90/60
90/90
6216
8.5/7.5
90/60
90/90
6040
8.5/7.2
90/58
90/90
6260
fpm
lb
33 Axle Load with Max Battery Unloaded Front
lb
4047
4300
4316
4518
4506
34
35 Tires
36
37
38 Wheelbase
39 Tread Width
Unloaded Rear
Number Front/Rear
Size Front
lb
3852
3924
4150
2 / 2
18x7x12.1
15 x 5 x 11.25
50.1
4122
4355
in
in
in
in
in
in
in
%
18x7x12.1
18x7x12.1
18x7x12.1 18x8x12.1
Size Rear
45.6
33.3
50.1
33.3
54.7
33.3
54.7
34.3
Front
Rear
Lowest Point
Center of Wheelbase
33.3
6.7
3.0
5.0
40 Ground Clearance, Loaded
41
42 Grade Clearance, Loaded
4.8
27.1
5.0
24.6
5.0
22.4
5.0
22.4
24.6
43 Brakes
44
45 Battery
Service
Parking
Type
Foot - Motor / Electric Assist
Auto - Electric
Lead Acid
46
Capacity
AH
KWH
lb
510
17.8
1475
1750
16.01
680
680
23.7
1850
2250
20.50
850
850
29.6
2250
2600
24.88
23.7
1850
2250
20.50
29.6
2250
2600
24.88
47
Weight - Min
Weight - Max
Size - Max
lb
Length
Width
Height
38.81
22.80
48 Battery Floor Height
49 Motors
50
With Rollers / w/o Rollers
Traction Motor, dia
Lift Motor, dia
in
in
in
10.4/9.8
7.5
6.7
51 Operating Pressure
For Attachments
psi
Up to 3100 psi
*
Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact your local dealer.
** Other mast heights available. See chart for other standard mast heights.
*** Add 4.25 inches for quad masts.
†
Includes load backrest.
†† Performance specifications are based on a truck equipped with a 190" triple telescopic mast.
†††Wide tread standard on 4000 lb model, trucks equipped with quad mast or TT mast collapsed height above 89".
Fork spread is 36" with wide tread.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SC 4500 Series
Mast Chart SC 4500 Series
Lifting Height
TT
208
41
QUAD
9
in
172
29
190
35
226
47
241
52
240
36
246
38
258
41
264
44
276
47
11 Free Lift Height*
14 Tilt B/F
in
degree
in
5/5
5/5
5/5
89
3/5
3/5
5/5**
83
5/5**
86
5/5**
89
5/5**
92
5/5**
95
17 Mast Collapsed Height
18 Mast Extended Height*
77
83
95
100
289.5
in
220.5
238.5
256.5
274.5
288
294
306
312
324
* Includes load backrest.
**Not available with drive-in rack or double-function hydraulics.
Technical Information
SC 4500 Series
6. Crown display
9. Keyless on/off switch
10. Fork lengths
Standard Equipment
1. Crown’s Access 1 2 3®
Comprehensive
Several designs contribute to
better visibility everywhere you
look. A low cowl for fork visibility,
a unique waterfall overhead
guard for load handling, a high
visibility mast and a compact
steer column all improve operator
visibility around the truck.
• Battery discharge indicator
with lift interrupt and
re-key feature
• Hour meters / travel
distance / stop watch
• Pin code access capable
• Event code display with
five (5) key navigation
11. Polished and tapered forks
12. Load backrest heights
System Control
2. e-GEN™ Braking System
with automatic parking brake
3. Intrinsic Stability System
13. Non-marking smooth or lug
rubber tires
14. Drive-in rack overhead guard
15. Tilt options
• Travel speed reduction and
appropriate brake control
when forks are above
free lift
• Forward tilt interlock
above free lift
• Controlled tilt speeds
• Counterweight exceeds
required standards
Control handles are crafted
into the compartment and
“fanned” for easy selection.
They are urethane covered
with tactile feedback for comfort
and easy selection. Control
actuation forces are minimal
and responsive.
• Access 1 2 3 diagnostics
• P1, P2, P3 Performance
tuning
16. Working lights
17. Flashing lights
18. Brake, tail and back-up light
19. Audible travel alarms
20. Tilt position assist
21. Arm rest
7. 350 amp battery connector
8. InfoPoint® System with
Quick Reference Guide
9. Color-coded wiring
Crown Drive System
• Cornering speed control
• Ramp hold
22. Work Assist™ Accessories
• Clip pad and hook
• Clamp
Crown has applied the latest
generation AC drive system,
enhanced with Access 1 2 3
technology. The demand for
high efficiency systems that
closely match customer torque
requirements is met with this
generation control system.
Crown-manufactured, indepen-
dently controlled, AC drive
motors are specifically designed
to optimize system integration
between the traction and
10. Lift out or side removal
battery access
• Ramp speed control
4. 36-volt system
11. Dual 15" steer tires
12. Large 18" cushion drive tires
• Clamp and
mounting plate
5. Driveability standard features
• 15" step height
13. Crown-manufactured drive
and lift motors
• Operator fan
• Fire extinguisher
• Mirrors
• Large, uncluttered
floorboard
14. Proportional rack and
pinion steering
• Rubber floor mat
15. Waterfall design
overhead guard
•
Rubber accelerator and
brake pedal
Driveability
The SC 4500 Series benefits
from Crown’s design and
engineering excellence.
Numerous design features
improve operator comfort
and productivity.
16. 48" high load backrest
• Large, entry/exit “window”
braking controls.
17. No tool lift out floorboards
for service access
•
Contoured battery cover for
easy entry/exit
Crown’s Access 1 2 3
technology provides optimum
performance and control by
offering a communication
interface for operators and
technicians, intelligent
coordination of lift truck
system and simplified service
with advanced diagnostics.
18. High visibility mast with
in-line hose routing
• Full suspension seat with
anti-cinch seat belt and
hip restraint
19. O-ring face seal
hydraulic fittings
A low 15" step height first greets
the operator. A low battery cover
that is streamlined helps the
operator glide into the truck’s full
suspension seat. The overhead
guard is shaped to open up the
entry/exit window. The compact
tilt steer column and steer wheel
further facilitate entry/exit. Floor-
boards are large, uncluttered
and rubber covered to insulate
the operator from vibration.
• Compact steering wheel
and steering column
20. 5° Forward / 5° Back tilt
• Infinitely adjustable
tilt steering
Optional Equipment
1. Battery rollers
•
Operator forward design
for enhanced visibility
The Crown display is used for
easy troubleshooting, access
service history and set perfor-
mance features. A distribution
panel is conveniently located
with all test points, control
fuses and central wiring for
easy troubleshooting.
2. Shoulder seat restraint
3. Freezer and corrosion
conditioning
• Low cowl for fork and
floor visibility
4. Sideshifter
• Urethane covered
control handles with
tactile feedback
5. Hydraulic valves for
attachments
Brake and accelerator pedals are
rubber covered to provide good
grip and comfort.
6. Quick disconnect
hydraulic connectors
• Natural position for
forward/reverse selector
Three modes of performance
can be selected to accommo-
date operator experience or
application requirements.
• Automatic parking brake
7. Steering spinner knob
8. Storage tray
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Information
SC 4500 Series
Hydraulics
“In-line” hose routing opens up
visibility. Cylinders are placed
to the sides to create a high
visibility design.
Other Options
e-GEN™ Braking System
Variable regenerative motor
braking is optimized and
The hydraulic system provides
continuous filtration. A heat
stabilized polymer hydraulic tank
is free from contamination and
retains strength over a wide
range of temperatures. Hydraulic
attachments can be added easily
in the field using modular valve
bodies. Hydraulic valve handle
actuation is precise and oil
is controlled using metered
spool valves.
1. Audible travel alarm
2. Flashing lights
assisted with electric friction
brakes, eliminating maintenance
associated with typical wet,
disk or drum and shoe style
brakes. The appropriate amount
of stopping force is applied to
match operator brake input
and the current operating
conditions of the truck.
Safety considerations and
dangers associated with
audible travel alarms and
flashing lights include:
The mast has four points of
attachment to the truck for good
load force distribution. Two
mounting points are at the
frame, where tilt cylinders attach.
Tilt cylinders use spherical
bushings to resist off center load
distortions. Two large diameter
trunions secure the mast to
the drive units.
• Multiple alarms and/or lights
can cause confusion.
• Workers ignore the alarms
and/or lights after day-in and
day-out exposure.
The closed loop Access 1 2 3
traction control will keep the
truck static until a travel input is
requested, even when operating
on a grade.
Ram displacement type lift
cylinders and two double
acting tilt cylinders are
Crown-manufactured. All
rams and piston rods are
hard chrome plated to
reduce pitting and extend
cylinder packing life. O-ring
face seal fittings are used
to eliminate leaks.
• Operator may transfer the
responsibility for “looking out”
to the pedestrians.
Drive Units
Two independent double
reduction gear drives offer
22.5 to 1 gear reduction.
The first reduction uses spiral
bevel gears for low noise and
efficiency. The second reduction
uses helical gears.The drive unit
gears are constantly lubricated
in an oil bath.
• Annoys operators and
pedestrians.
Automatic electric parking
brakes activate when the
operator leaves the seat, a
travel input has not been
requested or battery power
has been disconnected.
Other Options Available
Contact your local Crown dealer.
Dimensions and performance
data given may vary due to
manufacturing tolerances.
Performance is based on an
average size vehicle and is
affected by weight, condition of
truck, how it is equipped and
the conditions of the operating
area. Crown products and
specifications are subject to
change without notice.
Mast Assembly
Proportional Rack and
Pinion Steering System
Hydrostatic power steering uses
a large, totally enclosed rack and
pinion gear assembly.
Crown-manufactured mast
assembly utilizes a “flush-face”
interlocked I-beam design to
improve visibility and save truck
length. Roller bearing studs are
welded on both sides of the rails
for maximum strength and roller
bearings are canted to run in the
thick cross section of the rail. Tie
bars wrap around the rails for
added strength and to resist
off-center load forces.
This time proven design is quiet
and reliable, providing years of
trouble-free service.
Carriage
An ITA Class II carriage is stan-
dard. An optional hook type ITA
sideshifter or other attachments
are easily added. Optional fork
lengths are available.
The steering geometry is
matched to the controller to
deliver smooth steering at all
angles. The advantage is less tire
scrubbing which extends tire life.
Both motors receive power, even
in the tightest turns. This helps
the truck to accelerate, turn and
maneuver even from a full turn
start position.
Cornering speed control
regulates the drive motor’s
output by the turning degree
of the truck. The advantage is
smooth, stable steering which
may increase operator
confidence and productivity.
Large, (15" diameter) dual steer
wheels provide good traction
and stability.
Download from Www.Somanuals.com. All Manuals Search And Download.
Crown Equipment Corporation
New Bremen, Ohio 45869 USA
Tel 419-629-2311
C
Fax 419-629-3796
crown.com
Because Crown is continually improving its products,
specifications are subject to change without notice.
Crown, the Crown logo, the Momentum symbol,
Access 1 2 3, InfoPoint, e-GEN and Work Assist are
trademarks of Crown Equipment Corporation.
Copyright 2006 Crown Equipment Corporation
SF14690 9/06
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|