CR66
ROCHESTER
910-245000-001
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTION
General
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO YOUR EQUIPMENT
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.
2. Retain instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
Troubleshooting
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
There is no Power
1
The AC plugged is not well connected.
2
Check to see that the ON/OFF volume knob is
in the on position.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a built - in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the product.
There is no Sound
1
Check the volume level by turning the volume
knob.
Turntable will not work
1
Make sure the function switch is set to phono.
2
Try moving the tone arm to the right until you
hear a click.
AC
13. Lightning - For added protection for this product during a lightning storm, or when it is left
Polarized Plug
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
3
Make sure the protective needle cover is
removed.
the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
CD does not play
1
Check to make sure CD is inserted correctly
(label side facing up).
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
2
3
Check that the surface of the CD is clean
Make sure function switch is set to CD.
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions;
a. When the power-supply cord or plug is damaged.
.
If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other
products (including amplifiers) that produce heat.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct
the interference by one or more of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio TV technician for help.
11
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
Welcome
Table of Contents
Thank you for purchasing the Crosley Rochester
(CR66). Before operating this unit, please read this
manual thoroughly and retain it for future reference.
Getting Started
Repeat Playback
Programmed Playback
Control Locators....................... 4,5
Unpacking................................. 6
Power Source........................... 6
1
2
To repeat a single track, choose the track that
you want to repeat, then press the PLAY BUTTON
(16) to start the track. Press the REPEAT
BUTTON (10) once to repeat this track. The
REPEAT INDICATOR (9) will flash.
1
2
Press the PROGRAM BUTTON (8). " 01" will
shown on the display and the PROGRAM
INDICATOR (7) will flash.
About This Manual
Press the FORWARD SKIP BUTTON (13) or
the BACKWARD SKIP BUTTON (11) to select
a track.
Instructions in this manual describe the control
functions of the CR66.
To repeat all tracks, press the PLAY BUTTON
(16) to start the CD. Press the REPEAT
BUTTON (10) twice to repeat all tracks. Once
the CD ends, it will star over again from the
beginning of the CD. The REPEAT INDICATOR
(9) will remain on.
Base Operation
Turntable Operation.................. 7
3
4
5
Press the PROGRAM BUTTON (8) again to
store the selected track number.
Accessory: Adapter for 45 rpm
.................................................. 7
Cassette Operation.................. 8
Repeat steps 2 and 3 above to program other
tracks.
3
To erase the repeat function, press the REPEAT
BUTTON(10) again until the REPEAT INDICATOR
(9) is off.
Radio Operation....................... 8
Press the PLAY BUTTON (16) to start
Programmed playback. The PROGRAM
INDICATOR (7) will be on.
CD Operation
6
To erase the programmed sequence, press the
STOP BUTTON (14) twice or until the
PROGRAM INDICATOR (7) is off. Programmed
tracks will also erase when the CD DOOR
(17) is opened.
Playing a CD............................ 9,10
Programmed Playback............. 10
NOTE: Maximum of 20 tracks can be programmed
to play in any order.
General
Troubleshooting Guide.......... 11
Warranty..............................
12
10
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Locators
CD Operation
Playing A CD
Skip Forward And Skip Reverse
Unit Controls
1
1. SPEAKER
2. FUNCTION SWITCH
3. TUNING KNOB
4. DIAL SCALE
5. ON/OFF-VOLUME
ROTARY KNOB
6. AM/FM BAND SWITCH
7. PROGRAM INDICATOR
8. PROGRAM BUTTON
9. REPEAT INDICATOR
10. REPEAT BUTTON
11. B.SKIP BUTTON
12. LED DISPLAY
13. F.SKIP BUTTON
14. STOP BUTTON
15. PLAY INDICATOR
16. PLAY/PAUSE BUTTON
17. CD DOOR
1
Press the FORWARD SKIP BUTTON (13) or
the BACKWARD SKIP BUTTON (11) to select
a track.
1
2
Rotate the FUNCTION SWITCH (2) to CD.
Press the OPEN/CLOSE BUTTON (18) to open
the CD DOOR (17). Place a disc in the tray
with the labeled side of the disc facing up.
2
Press the PLAY BUTTON (16) to start playing
the selected track
3
Press the OPEN/CLOSE BUTTON (18) again
close the CD DOOR (17). The display will
show “—“ for a few seconds, then the total
number of tracks on the disc will be displayed.
“00” will be shown when there is no disc inside
the unit.
TAPE
RADIO
CD
PHONO
VOLUME
ON
OFF
MAX.
Search Forward And Reverse During Play
AM FM
PROG
.
REPEAT
B.SKIP
F.SKIP
STOP
PLAY
OPEN/CLOSE
8.8
.
PLAYBACK
4
5
6
Press the PLAY BUTTON (16) to start playback.
The PLAY INDICATOR (15) will light up.
1
Press and hold the FORWARD SKIP BUTTON
(13) or the BACKWARD SKIP BUTTON (11) to
search forward or backward though the selected
track.
Adjust the VOLUME ROTARY KNOB (2) to the
desired volume level.
3
4
2
5
2
Release the button at the desired point, playback
will resume automatically.
To pause playback, press the PLAY/PAUSE
BUTTON (16). The PLAY INDICATOR (15) will
flash. Press the PLAY BUTTON (16) again to
resume playback.
CD
PHONO
TAPE
RADIO
VOLUME
18. OPEN/CLOSE BUTTON
ON
OFF
MAX.
AM FM
PROG.
REPEAT
B.SKIP
F.SKIP
STOP
PLAY
OPEN/CLOSE
7
To stop playback, press the STOP BUTTON
(14). The PLAY INDICATOR (15) will go off.
8.8
.
7
9
11
13
15
17
6
8
10
12
14 16 18
4
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette & Radio Operation
Control Locators
Radio Operation
Cassette Operation
Unit Controls
20
21
19
1
2
Rotate the FUNCTION SWITCH (2) to TAPE
position.
1
2
3
4
Rotate the FUNCTION SWITCH (2) to select
RADIO mode.
19. TURNTABLE
20. SPINDLE
21. ADAPTER FOR
45 RPM RECORD
22. TONE ARM
Insert a prerecorded tape through the CASSETTE
DOOR (29). Tape will slide into the cassette
mechanism and start playing.
Set the AM/FM BAND SWITCH (6) to the desired
band (AM or FM).
22
23
23. SPEED CONTROL SWITCH
Select the desired radio station by rotating
TUNING KNOB (3)
1
(33
/
, 45, 78 RPM)
3
3
4
Adjust the volume level by turning the VOLUME
KNOB (5).
24. TONE ARM REST
24
25. SECURITY HOOK
25
Adjust the ON/OFF-VOLUME ROTARY KNOB
(5) to the desired sound level.
For fast forwarding, press the CASSETTE
EJECT/F.F (28) half way in. Pressing again,
will stop the fast forwarding and return the
cassette to the playing mode.
26. EXTERNAL ANTENNA
27. AC POWER PLUG CORD
28. CASSETTE EJECT / FAST FORWARD
29. CASSETTE DOOR
Antenna
5
6
To stop and eject the cassette, press the
CASSETTE EJECT/F.F (28) in completely.
Antenna: for FM reception, the unit is provided with
a FM WIRE ANTENNA (26) , move the wire until
the reception is clear and with no interferences. For
AM reception, the unit is provided with a directional
build-in ferrite antenna. Rotate the set to find the
position in which the best reception is obtained. Do
When one side of the tape finishes playing, the
cassette will automatically stop.
NOTE: Remove the tape from the unit when it is not
in use or stopped.
not connect the EXTERNAL FM ANTENNA (26) to
any outside antenna.
26
27
28
29
5
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Turntable Operation
Unpacking
Power Source
Turntable Operation
Accessory: ADAPTER FOR 45 RPM
Turn the unit on by rotating the ON/OFF-VOLUME
ROTARY KNOB (5) located on the front panel to
the ON position.
This adaptor allows you to play 45 RPM records.
1
Remove packing materials from unit.
Note: Save all packing materials.
1
2
Unwind the AC POWER CORD (27) at the back
of the unit and connect it to a power outlet.
1
Rotate the FUNCTION SWITCH (2) to select
PHONO mode.
2
3
4
Remove plastic bag covering radio.
Plug A/C cord into appropriate outlet.
Remove plastic safety cover from A/C plug.
2
Set the SPEED CONTROL SWITCH (23) to
desire speed (33 1/3,45 or 78 rpm). Place the
record on the turntable.
AC
Remove tie from A/C cord and untie antenna
wire on back of radio.
1
2
Place the 45 RPM adaptor over the spindle.
Polarized Plug
Gently place your 45 RPM record onto the
turntable.
3
4
Pull the TONE ARM (22) slightly to the right
side until hear the “click”sound to activate the
turntable.
5
6
7
Open lid and remove styrofoam shipping
material from turntable.
3
This product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature, If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact you electrician to
replace your obsolete outlet. Do not defeat the
purpose of the polarized plug.
3
Follow the steps under turntable operation to
play your record.
Remove black tie-wrap from under the tone
arm.
Move the TONE ARM (22) by hand over the
record and slowly lower it. Adjust the ON/OFF-
VOLUME ROTARY KNOB (5) to the desired
listening level.
Remove white protective needle cover by gently
pulling towards the front of the unit.
5
At the end of the record, the TONE ARM (22)
will stop automatically. You must return to TONE
ARM to arm rest by hand.
8
Untie the FM antenna and allow it to hang down
in a straight line for optimum FM reception. If
you have trouble tuning in an FM station, move
the external FM antenna for best reception. Do
no connect FM antenna to outside antenna.
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|