412A
412B
Guitar Speaker Enclosures
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
FlexWave412A/B Guitar Enclosure
The Input/Output Plate:
1. Impedance Selector Switch: Use
this switch to select 16 ohm mono
operation or 8 ohm stereo/4 ohm
mono operation.
3
4
2
2. Out 1/4" Jack: When using the
cabinet in the mono operating mode,
use this jack to connect the cabinet
to another speaker enclosure of the
same impedance.
1
3. In/Left 1/4" Jack: When using
the cabinet in the mono operating
mode, use this jack as the cabinet’s
input jack. Connect the output of your
amplifier to this jack by means of the
speaker cable provided.
4 Ohm Mono Configuration:
OUT
Mono Amplifier
16 OHM
4 OHM
When using the cabinet in the stereo
operating mode, connect this jack to
the left channel output of your amplifier.
OUT
IN
FW412A/B
Input plate
16 OHMS 4 OHMS
MONO
MONO
4. Right 1/4" Jack: When using the
cabinet in the stereo operating mode,
connect this jack to the right channel
output of your amplifier.
8 OHMS
STEREO
LEFT
RIGHT
When using the cabinet in the mono
operating mode, this jack is not used.
16 Ohm Mono Configuration:
OUT
Mono Amplifier
16 OHM
4 OHM
Refer to the illustrations on the right
for additional information.
OUT
IN
FW412A/B
Input plate
16 OHMS 4 OHMS
MONO
MONO
8 OHMS
STEREO
LEFT
RIGHT
8 Ohm Stereo Configuration:
LEFT OUT
RIGHT OUT
Stereo Amplifier
OUT
IN
FW412A/B
Input plate
16 OHMS 4 OHMS
MONO
MONO
8 OHMS
STEREO
LEFT
RIGHT
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FlexWave412A/B Guitar Enclosure
FlexWave 412A/B Technical Specifications:
Impedance
4 or 16 ohms Mono, 8 ohms Stereo
RMS Power Rating
Peak Power Handling
Frequency Response
Sensitivity
120 watts Mono, 60 watts Stereo
240 watts Mono, 120 watts Stereo
80 Hz – 5 kHz
96 dB SPL 1 watt/1 meter
Maximum SPL
118 dB
Transducers
(4) Custom Design 12" 16 ohm 30 watt speakers
(3) 1/4" jacks: Mono In/Out, Stereo Left and Right
Full Range Inputs
Dimensions (H x W x D)
31.5 in x 30.0 in x 14.0 in
80.0 cm x 76.2 cm x 35.6 cm
Weight
FW412A: 50.0 lb/22.7 kg
FW412B: 52.0 lb/23.6 kg
Specifications subject to change without notice.
The FlexWave 412A and 412B are covered with a durable fabric-backed vinyl material. Wipe it clean
with a lint-free cloth. Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which
would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Crate” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or
registered trademarks of their respective holders and are hereby acknowledged.
Service Information:
If you are having a problem with your FlexWave 412A or 412B, you can go to our website
(www.crateamps.com) and click on Support for service information, or call 1-800-898-3211
during business hours (7 am to 5 pm PST, Monday-Friday). If you are outside of the U.S.,
contact your local distributor for technical support and service.
©2007 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. 0023759 Rev. A 02/07
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|