Guitar Amplifier with
Digital Effects
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
Congratulations!
You are now the proud owner of the Crate RFX65 three-channel guitar amplifier
with Advanced Digital Signal Processing. This rugged amplifier combines outstanding
features with serious clean and distorted sounds. Dual DSP controls provide 15 “Multi”
effects and 15 Delay effects which can be combined for a wide variety of sounds. The
Save/Tap button allows you to manually set the tempo of many of the effects and to
save new DSP presets in the amplifier’s non-volatile memory. A separate Reverb
control adds even more to the array of effects. Front panel RCA CD Input jacks
allow you to play along with your favorite CD or tape. The rear panel Insert Jack allows
you to connect your effects for greater flexibility. Channel switching and DSP may be
controlled by means of a footswitch, which also allows access to two DSP presets on
each of the three channels. The top-mounted electronic tuner lets you get tuned and
stay in tune any time the amplifier is on.
Like all Crate products, your RFX65 amplifier is designed by musicians, and built
using only the best components. Extensive testing confirms that this amplifier is the
absolute best it can be.
In order to get the most out of your new amplifier, we strongly suggest that you read
the information contained in this guide before you begin playing.
CRATE
And thank you for choosing
.
CAUTION
PRECAUCION
ATTENTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RIESGO DE CORRIENTAZO
NO ABRA
RISQUE D'ELECTROCUTION
NE PAS OUVRIR
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOIS-
TURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRECAUCION: PARA REDUCIR EL RIESGO DE INCENDIOS
O
DESCARGAS
LA
ATTENTION: PROTÉGEZ CET APPAREIL DE LA PLUIE ET DE L'HUMIDITÉ
AFIN D'ÉVITER TOUT RISQUE D'INCENDIE OU D'ÉLECTROCUTION. POUR
REDUIRE D'ELECTROCUTION NE PAS ENLEVER LE COUVERCLE. AUCUNE
PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR TOUTE
REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE.
ELECTRICAS, NO PERMITA QUE ESTE APARATO QUEDE EXPUESTO
A
LLUVIA
O
LA HUMEDAD. PARA DISMINUOIR EL RIESGO DE CORRIENTAZO.
NO ABRA LA CUBIERTA. NO HAY PIEZAS ADENTRO QUE EL USARIO PUEDO
REPARAR DEJE TODO MANTENIMIENTO A LOS TECHNICOS CALIFICADOS.
IMPORTANT SAFETY INSTRUCTIONS
•
•
READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. FOR PROPER OPERATION,
THIS UNIT REQUIRES 3” (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIR FLOW PROVISIONS IN THE CABINET.
•
•
•
DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND COMPATIBLE WITH
VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS.
•
•
•
PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR SAFE OPERA-
TION AND TO AVOID INJURY.
•
•
•
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS
CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PROTECTION IS RECOMMENDED IF UNIT IS
OPERATED AT HIGH VOLUME.
•
WARNING: THIS UNIT REQUIRES A SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRIC CODES HAVING THE LINE SUPPLY VOLTAGE,
POWER, AND FREQUENCY IDENTIFIED ON THE REAR OF THE UNIT. THE OUTLET MUST REMAIN ACCESSIBLE TO DISCONNECT THE UNIT IF A
FAULT SHOULD ARISE WHILE IN USE. THIS UNIT SHOULD BE UNPLUGGED WHEN NOT IN USE.
EXPLANATION OF GRAPHICAL SYMBOLS:
EXPLICACION DE SIMBOLOS GRAFICOS:
EXPLICATION DES SYMBÔLES GRAPHIQUES:
"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL"
“ES NECESARIO QUE EL USUARIO SE REFIERA AL MANUAL DE INSTRUCCIONES.”
"REFERREZ-VOUS AU MANUAL D'UTILISATION"
"DANGEROUS VOLTAGE"
“VOLTAJE PELIGROSO”
"DANGER HAUTE TENSION"
=
=
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
The Top Panel:
19
MULTI
PHASER
EC
VIB
FLANGE
O
T
SIN
CHORUS
R
INPUT
SOLO
RHYTHM
SOLO
RHYTHM
GAIN
SHAPE
LEVEL
GAIN
LOW
MID
HIGH
1
2
3
4
5
6
7
8
9
10
11
1: INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument
cable.
SOLO/RHYTHM CHANNELS: High gain channels giving you sounds with serious overdrive.
2: SOLO LED: This LED illuminates when the Solo channel is selected.
3: GAIN: Use this control to adjust the amount of distortion produced by the Solo channel.
4: SHAPE: Use this control to “dial in” the tone for the Solo channel. Rotating the control counter-
clockwise enhances the mid frequencies, while rotating the control clockwise enhances the low and
high frequencies.
5: LEVEL: Use this control to adjust the output level of the Solo channel.
6: SOLO/RHYTHM: Use this switch to select the Solo or Rhythm channel. When this switch is
depressed, the Solo channel is selected. With the switch in the out position, the Rhythm channel is
selected. This switch is active only when the Solo/Rhythm/Clean switch (#13) is depressed.
7: RHYTHM LED: This LED illuminates when the Rhythm channel is selected.
8: GAIN: Use this control to adjust the amount of distortion produced by the Rhythm channel.
9: LOW: Use this control to adjust the low frequency level of the Solo/Rhythm channel.
10: MID: Use this control to adjust the midrange frequency level of the Solo/Rhythm channel.
11: HIGH: Use this control to adjust the high frequency level of the Solo/Rhythm channel.
12: LEVEL: Use this control to adjust the output level of the Rhythm channel.
13: SOLO/RHYTHM/CLEAN SELECT: Use this switch to select the Clean channel or the Solo and
Rhythm channels. With the switch in the out position, the Clean channel is selected. When the switch
is depressed, either the Solo or Rhythm channel is selected, depending on the setting of the
Solo/Rhythm switch (#6).
CLEAN CHANNEL: A normal gain channel designed to give you crystal clean sounds.
14: CLEAN LED: This LED illuminates when the Clean channel is selected.
15: VOLUME: Use this control to adjust the output level of the Clean channel.
16: LOW: Use this control to adjust the low frequency level of the Clean channel.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
20
21 22
23
DELAY
REVERB
TAPE
ECHO
DSP
VIB
POWER
O
SAVE / TAP
EFX
SINGLE
CLEAN
RHYTHM /
SOLO
CLEAN
LEVEL
VOLUME
LOW
MID
HIGH
CD INPUT
12
13 14
15
16
17
18
24
25
17: MID: Use this control to adjust the midrange frequency level of the Clean channel.
18: HIGH: Use this control to adjust the high frequency level of the Clean channel.
19: MULTI: Use this control to select one of the fifteen “Multi” digital effects. Complete information
about the DSP effects is on page 7.
20: DELAY: Use this control to select one of the fifteen Delay digital effects. Complete information
about the DSP effects is on page 7.
21: SAVE/TAP: Use this pushbutton to set the tempo of many of the effects by tapping the button
repeatedly in time with the desired tempo. The Save/Tap button is also used to save DSP presets
and to restore the factory default DSP settings. Additional information about the Save/Tap button is
on pages 7 and 8.
22: SAVE/TAP LED: This LED flashes in time with the tempo set by the Save/Tap button (#21), and
serves as a status indicator for certain DSP activities (see page 8).
NOTE: For some of the DSP effects, the Save/Tap LED remains illuminated. The Save/Tap LED does not
illuminate when the DSP knobs are set to the Bypass position.
23. REVERB: Use this control to adjust the amount of digital reverb effect. In its fully counterclock-
wise position the signal will be “dry” (without any reverb). As you rotate the control clockwise the
amount of reverb increases.
24: CD INPUT: Use these RCA jacks to connect the output from a CD player or tape deck to the
amplifier. The signal at these jacks is combined into a mono signal which is sent to the internal power
amp circuit. Use the CD or tape player’s output level control to adjust the signal for the proper mix
with your guitar.
25: POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of
the switch depressed). The switch illuminates when the power is on.
NOTE: When the amplifier is turned on, the Save/Tap LED flashes for one second before the amplifier is
operational.
26: ELECTRONIC TUNER (cabinet top, not shown): The electronic tuner is active whenever the amplifier is
turned on, providing constant, “real-time” tuning. The bottom row of LEDs indicate which note (string) is being
tuned. The top row of LEDs provides directional queues to facilitate quick and precise tuning of your instrument.
The indicated note (string) is properly tuned when only the center LED is illuminated.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
The Bottom Panel:
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must
accept any interference received, including interference that
may cause undesired operation.
27
28
29
30
31
27: FUSE: The fuse protects the amplifier from damages caused by a faulty AC power source and/or other prob-
lems. If the fuse opens, replace it ONLY with the same size and type. If fuses continue to fail, check the AC source
– if the source is okay, contact your Crate dealer for service information.
28: EXTENSION SPEAKER: Use this jack to connect the amplifier to an external speaker cabinet. This jack is
wired in series with the internal speaker(s) which remain active when an extension speaker is connected.
29: DSP A/B FOOTSWITCH: Use this jack to connect one of the footswitch cables to the three-button footswitch
(supplied). This allows you to select between two presets for each of the three channels. Additional information
about the operation of the footswitch is on page 9.
30: CLEAN/SOLO/RHYTHM FOOTSWITCH: Use this jack to connect one of the footswitch cables to the three-
button footswitch (supplied). This allows you to remotely switch between the Clean and Distortion channels and
between the Solo and Rhythm channels. (See page 9.)
31: INSERT: Use this jack to connect an external signal processor to the amplifier. Use Crate’s STP201, STP202,
or STP203 stereo-to-mono Y-cord or an adapter such as Crate’s YPP117 and two 1/4” mono signal cables to con-
nect to the effect as shown below.
32: AC LINE CORD (not shown): This grounded power cord is to be plugged into a grounded power outlet, wired
to current electrical codes and compatible with the voltage, power, and frequency requirements stated on the bot-
tom panel. Do not attempt to defeat the safety ground connection.
Stereo-to-mono Y-cord:
Y-adapter and 2 cables:
TIP
RETURN
TIP
RING
to Insert
jack
to Insert
jack
RING
SLEEVE
SEND
GROUND
SLEEVE
(STP201, 3'
STP202, 6'
STP203, 9')
(YPP117)
(1/4"-TO-1/4"
MONO SHIELDED
CABLES)
to
to
effect
"IN"
to
to
effect
"IN"
effect
"OUT"
jack
effect
"OUT"
jack
jack
jack
6
External Effect
External Effect
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
The DSP Section:
MULTI
DELAY
REVERB
PHASER
TAPE
ECHO
The RFX65 features DSP
controls for Multi, Delay and
Reverb. Complete information
about the Multi and Delay
DSP
SAVE / TAP
FLANGE
VIB
O
EFX
T
SINGLE
CHORUS
R
effects is given below. The Multi control selects the “pitch modified” and wah effects.
Many of these effects have their speed controlled by the Save/Tap button. The Delay
control selects the delay or echo effects. All of these effects have their speed controlled
by the Save/Tap button. Additional information is provided on pages 5 and 10.
SIGNAL PATH FOR ECHO LO, MID & HI EFFECTS:
DELAY MULTI
SIGNAL PATH FOR ALL OTHER EFFECTS:
MULTI DELAY
MULTI:
NAME
DESCRIPTION
Chorus w/low depth
SAVE/TAP BUTTON CONTROLS:
speed: 1 cycle/tap - tap period: .05–1 second
speed: 1 cycle/tap - tap period: .05–1 second
speed: 1 cycle/tap - tap period: .05–1 second
speed: 4 cycle/tap - tap period: .05–1 second
speed: 4 cycle/tap - tap period: .05–1 second
speed: 4 cycle/tap - tap period: .05–1 second
speed: 2 cycle/tap - tap period: .05–1 second
speed: 2 cycle/tap - tap period: .05–1 second
speed: 2 cycle/tap - tap period: .05–1 second
speed: 1 cycle/tap - tap period: .05–1 second
speed: 1 cycle/tap - tap period: .05–1 second
speed: 1 cycle/tap - tap period: .05–1 second
n/a
Chorus LO
Chorus MID
Chorus HI
Flange LO
Flange MID
Flange HI
Phaser LO
Phaser MID
Phaser HI
Vibrato LO
Vibrato MID
Vibrato HI
Octave Down
Touch Wah
Reverse Wah
Bypass
Chorus w/medium depth
Chorus w/high depth
Flanger w/low depth
Flanger w/medium depth
Flanger w/high depth
Phaser w/low feedback
Phaser w/medium feedback
Phaser w/high feedback
Vibrato w/low depth
Vibrato w/medium depth
Vibrato w/high depth
Adds signal one octave lower
Touch-sensitive wah-wah
Inverted wah-wah
n/a
n/a
n/a
Dry signal - no effect
DELAY:
NAME
DESCRIPTION
SAVE/TAP BUTTON CONTROLS:
time: .05–1 second
time: .05–1 second
time: .05–1 second
time: .05–1 second
time: .05–1 second
time: .05–1 second
time: .05–1 second
time: .05–1 second
time: .05–1 second
time: .05–1 second
time: .05–1 second
time: .05–1 second
time: .05–1 second
Single LO
Single MID
Single HI
Single MAX
Echo LO
Echo MID
Echo HI
Echo MAX
Tape LO
Single delay w/low level
Single delay w/medium level
Single delay w/high level
Single delay w/maximum level
Echo w/low level
Echo w/medium level
Echo w/high level
Echo w/maximum level
Tape echo w/low level
Tape echo w/medium level
Tape echo w/high level
Tape echo w/maximum level
Echo w/low level, before multi effect
Echo w/medium level, before multi effect
Echo w/high level, before multi effect
Dry signal - no effect
Tape MID
Tape HI
Tape MAX
Echo FX LO
Echo FX MID
Echo FX HI
Bypass
time: .05–1 second
time: .05–1 second
n/a
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
Storing Your Own Presets:
Each channel of the RFX65 has two factory assigned DSP presets, as shown on
pages 10 and 11. No matter what the settings of the DSP controls, the preset is recalled
when a channel is selected. You may change the DSP settings by rotating the DSP con-
trols - these changes will remain active until a different channel is selected, but will not
be there for later use unless they are saved. To save a new DSP preset to a channel,
first make the desired DSP changes. Then press and hold the Save/Tap button for about
three seconds. The Save/Tap LED will flash through three quick sequences, indicating
the preset was saved. The new preset is stored for that channel and will remain in mem-
ory until a new preset is stored for that channel or the factory presets are restored.
We recommend making copies of page 14 of this guide for the purpose of writing down your own presets.
MULTI
DELAY
REVERB
MULTI
DELAY
REVERB
MULTI
PHASER
DELAY
REVERB
PHASER
PHASER
TAPE
TAPE
TAPE
ECHO
ECHO
ECHO
DSP
DSP
DSP
FLANGE
VIB
FLANGE
VIB
FLANGE
VIB
O
SAVE / TAP
O
SAVE / TP
O
SAVE / TAP
T
SINGLE
EFX
T
SINGLE
EFX
T
SINGLE
EFX
CHORUS
R
CHORUS
R
CHORUS
R
3 SECONDS
CHANGES ARE
SAVED AS
NEW PRESET
Restoring the Factory Presets:
The factory assigned DSP presets may be restored, erasing any changes you have
made. Turn the amplifier off. Press and hold the Save/Tap button as you turn the amplifi-
er on. The Save/Tap LED will flash through two quick sequences, indicating the factory
presets have been restored.
More About the Save/Tap Button:
The Save/Tap button is used to set the tempo of an effect by pressing it twice within
a one second time frame. The time between the two taps sets the timing of the effect. If
the Save/tap button is pressed an odd number of times (once, three times, etc.), the tim-
ing will default to the maximum one second time period.
The Multi effects and the Delay effects may each have a different tap speed. The
default “target” for the Save/Tap button is the Delay control. To select the Multi control as
the tap button’s target, rotate the Multi control. The Save/Tap tempo function will auto-
matically revert back to the Delay control 16 seconds after the Multi control is rotated, or
when the tap speed was last changed for the Multi effect.
NOTE: In most cases, it is usually more pleasing to the ear to set a slower tap speed for the HI effects and
a faster tap speed for the LO effects.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
Using the Footswitch for More Presets:
The Crate three-button footswitch supplied with the RFX65 allows access to an addi-
tional DSP preset for each channel of the amplifier. When the footswitch is connected to
the amplifier as shown below, the “original” DSP presets are active for each channel
when the #3 footswitch LED is illuminated. These are referred to as “DSP Bank ‘A’.”
When the #3 button is switched and the LED is out, a second DSP preset may be stored
and recalled for each channel - “DSP Bank ‘B’.”
NOTE: DSP Bank “B” presets are only accessible when the footswitch is connected to the amplifier. When
the footswitch is not connected, only DSP Bank “A” is accessable.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must
accept any interference received, including interference that
may cause undesired operation.
"LEFT" jack
"RIGHT" jack
1
2
3
LED on = SOLO/
RHYTHM CH.
BANK "A"
LED off = RHTYHM CH.
LED off = CLEAN
LED off = DSP
Only when Switch #2
CH.
BANK "B"
is activated (LED lit)!
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
DSP Factory Presets:
The RFX65 Factory Presets for the DSP section are as follows:
Factory Preset 1: Clean w/Chorus, Delay,Reverb
MULTI
DELAY
REVERB
PHASER
CHANNEL: SOLO
RHYTHM
CLEAN
BANK: "A"
"B"
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
O
EFX
T
SINGLE
CHORUS
R
TAP Tempo MEDIUM
TAP Tempo MEDIUM
Factory Preset 2: Rhythm w/Slapback Delay
MULTI
DELAY
REVERB
PHASER
CHANNEL: SOLO
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
RHYTHM
CLEAN
O
BANK: "A"
EFX
T
SINGLE
CHORUS
R
"B"
TAP Tempo FAST
TAP Tempo N/A
Factory Preset 3: Solo w/Flange,Delay,Reverb
MULTI
DELAY
REVERB
PHASER
CHANNEL: SOLO
RHYTHM
CLEAN
BANK: "A"
"B"
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
O
EFX
T
SINGLE
CHORUS
R
TAP Tempo MEDIUM
TAP Tempo MEDIUM
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
DSP Factory Presets:
The RFX65 Factory Presets for the DSP section are as follows:
Factory Preset 4: Clean w/Reverb
MULTI
DELAY
REVERB
PHASER
CHANNEL: SOLO
RHYTHM
CLEAN
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
O
BANK: "A"
EFX
T
SINGLE
CHORUS
R
"B"
TAP Tempo N/A
TAP Tempo N/A
Factory Preset 5: Rhythm w/Reverb
MULTI
DELAY
REVERB
PHASER
CHANNEL: SOLO
RHYTHM
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
CLEAN
O
BANK: "A"
"B"
EFX
T
SINGLE
CHORUS
R
TAP Tempo N/A
TAP Tempo N/A
Factory Preset 6: Solo w/Reverb
MULTI
DELAY
REVERB
PHASER
CHANNEL: SOLO
RHYTHM
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
CLEAN
O
BANK: "A"
"B"
EFX
T
SINGLE
CHORUS
R
TAP Tempo N/A
TAP Tempo N/A
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
Suggested Settings:
TAP Tempo MEDIUM
TAP Tempo MEDIUM
MULTI
DELAY
REVERB
PHASER
TAPE
ECHO
DSP
FLANGE
VIB
O
SAVE / TAP
"Oceanic"
Clean with
T
SINGLE
EFX
CHORUS
R
SOLO
RHYTHM
CLEAN
Vibrato, Delay,
RHYTHM
SOLO
/
SOLO
& Reverb
RHYTHM
CLEAN
GAIN
SHAPE
LEVEL
GAIN
LOW
MID
HIGH
LEVEL
VOLUME
LOW
MID
HIGH
OUT
TAP Tempo N/A
TAP Tempo FAST
MULTI
DELAY
REVERB
PHASER
TAPE
ECHO
DSP
FLANGE
VIB
"Super Funk"
Clean with
Wah, Delay,
& Reverb
O
SAVE / TAP
T
SINGLE
EFX
CHORUS
R
SOLO
RHYTHM
CLEAN
RHYTHM
SOLO
/
SOLO
RHYTHM
CLEAN
GAIN
SHAPE
LEVEL
GAIN
LOW
MID
HIGH
LEVEL
VOLUME
LOW
MID
HIGH
OUT
TAP Tempo N/A
TAP Tempo MEDIUM
MULTI
DELAY
REVERB
PHASER
TAPE
ECHO
DSP
FLANGE
VIB
"Arena"
Rhythm with
Reverb
O
SAVE / TAP
T
SINGLE
EFX
CHORUS
R
SOLO
RHYTHM
CLEAN
RHYTHM
SOLO
/
SOLO
& Delay
RHYTHM
CLEAN
GAIN
SHAPE
LEVEL
GAIN
LOW
MID
HIGH
LEVEL
VOLUME
LOW
MID
HIGH
OUT
IN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
Suggested Settings:
TAP Tempo MEDIUM
TAP Tempo N/A
MULTI
DELAY
REVERB
PHASER
TAPE
ECHO
DSP
FLANGE
VIB
"Haze Faze"
Rhythm with
O
SAVE / TAP
T
SINGLE
EFX
CHORUS
R
SOLO
RHYTHM
CLEAN
Phase
RHYTHM
SOLO
/
SOLO
& Reverb
RHYTHM
CLEAN
GAIN
GAIN
GAIN
SHAPE
LEVEL
LEVEL
LEVEL
GAIN
GAIN
GAIN
LOW
MID
HIGH
LEVEL
VOLUME
LOW
MID
HIGH
HIGH
HIGH
OUT
IN
TAP Tempo N/A
TAP Tempo N/A
MULTI
DELAY
REVERB
PHASER
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
"Solo Wah"
Solo with
Wah, Delay
& Reverb
O
T
SINGLE
EFX
CHORUS
R
SOLO
RHYTHM
CLEAN
RHYTHM
SOLO
/
SOLO
RHYTHM
CLEAN
SHAPE
LOW
MID
HIGH
LEVEL
VOLUME
LOW
MID
IN
IN
TAP Tempo N/A
TAP Tempo N/A
MULTI
DELAY
REVERB
PHASER
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
"Octanator"
Solo with
Octave
O
T
SINGLE
EFX
CHORUS
R
SOLO
RHYTHM
CLEAN
RHYTHM
SOLO
/
SOLO
& Reverb
RHYTHM
CLEAN
SHAPE
LOW
MID
HIGH
LEVEL
VOLUME
LOW
MID
IN
IN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
DSP “Fill in the Blanks” (User Settings):
Copy this page to fill in your own DSP Presets!
User Preset: _________________________________
MULTI
DELAY
REVERB
PHASER
CHANNEL: SOLO
RHYTHM
CLEAN
BANK: "A"
"B"
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
O
EFX
T
SINGLE
CHORUS
R
TAP Tempo __________
TAP Tempo __________
User Preset: _________________________________
MULTI
DELAY
REVERB
PHASER
CHANNEL: SOLO
RHYTHM
CLEAN
BANK: "A"
"B"
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
O
EFX
T
SINGLE
CHORUS
R
TAP Tempo __________
TAP Tempo __________
User Preset: _________________________________
MULTI
DELAY
REVERB
PHASER
CHANNEL: SOLO
RHYTHM
CLEAN
BANK: "A"
"B"
TAPE
ECHO
DSP
SAVE / TAP
FLANGE
VIB
O
EFX
T
SINGLE
CHORUS
R
TAP Tempo __________
TAP Tempo __________
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
System Block Diagram:
TUNER
A BC D EF G
BUFFER
INPUT
CLEAN
VOLUME LOW MID HIGH
SOLO/
RHYTHM/
CLEAN
SOLO
SOLO
RHYTHM
SOLO
SOLO
SWITCHING
CIRCUIT
LEVEL
RHYTHM
RHYTHM
SOLO/
RHYTHM
RHYTHM
LEVEL
SOLO
GAIN
RHYTHM
GAIN
SHAPE
LOW MID HIGH
MIX
AMP
INSERT
REVERB
POWER
AMP
TAP
SPEAKER
MULTI
DELAY
CD
INPUT
EXT.
SPEAKER
DAMPING
CIRCUIT
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Guitar Amplifier
RFX65 TECHNICAL SPECIFICATIONS:
Output Power Rating
Speaker Size and Rating
Input Impedance
65W RMS @5% THD, 8Ω, 120 VAC
(1) Custom Design 12”, 8Ω
470kΩ
Total System Gain
Solo Ch
Rhythm Ch
Clean Ch
110dB, all controls @10
88dB, all controls @10
58dB, all controls @10
CD Input
29dB
Maximum Input Signal Accepted
7 volts peak-to-peak
Proprietary Circuit
Solo Channel
Shape Control
Rhythm Channel
Low Control
Mid Control
High Control
20dB range @ 80Hz
15dB range @ 1kHz
20dB range @ 10kHz
Clean Channel
Low Control
Mid Control
High Control
36dB range @ 80Hz
15dB range @ 800Hz
40dB range @ 10kHz
Power Requirements
Size and Weight
120 VAC, 60Hz, 90VA
100/115VAC, 50/60Hz, 90VA;
230VAC, 50/60Hz, 90VA
19-1/4” H x 21” W x 10-1/4” D, 34 lbs.
The RFX65 is covered with a durable Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
©2004 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133
47-639-02 • 121404
Download from Www.Somanuals.com. All Manuals Search And Download.
|