User’s Guide
for the
CRATE PRO AUDIO
CSM8/12/16/24
Console Mixer
In order to achieve maximum performance from
your new Crate Pro Audio Mixer we recommend
that you read this user’s guide prior to its use.
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
Introduction:
In the world of professional sound reinforcement and audio reproduction there is no
room for compromise. It is absolutely vital that the emotions of a performance are projected
to your audience, not just sounds. Your new Crate Pro Audio CSM8/12/16/24 Console Mixer
is a powerful tool which allows you to successfully bridge the gap between performers and
audience without losing any of the “life” of the performance in the process. No matter what
your particular application, your Crate Pro Audio mixer is ready to meet the challenge with a
level of performance and control unequaled by its competition.
Crate Pro Audio mixers are the result of our interest in and experience with high-perfor-
mance audio equipment, combined with our extensive research and development procedures,
and guided by our love of musical performances. Each mixer is built using a variety of innova-
tive construction methods making it truly reliable and incredibly roadworthy. Its diverse features
offer you an extremely high degree of versatility and flexibility regardless of the application. The
mixer has been thoughtfully designed to keep you constantly in total control of your performing
environment, always with the best possible sound.
Features:
Crate Pro Audio CSM8/12/16/24 mixers combine the latest technology with contemporary
styling and flexible features. In addition, their exceptionally low noise, incredible headroom
make them perfect for use on stage, in the home studio, or for “institutional” use. Each of the
input channels offers you the choice of balanced XLR Low-Z or balanced 1/4" Hi-Z Input jacks,
an insert jack, a peak/signal LED, gain control, three bands of equalization, four fully-adjustable
aux sends, a pan control, mute and PFL switches, and a long range channel fader. The master
section offers left, right and mix XLR and 1/4” balanced output jacks, a PFL out jack, stereo
Tape In and Out jacks, four aux sends, two stereo aux returns with level and pan controls, dual
11-step LED meters, switchable Phantom Power, a Headphones jack with level control, PFL left,
right and mix selector switches, and four master faders: aux 1, left, right, and mix.
The color-coded knobs help you know at a glance if you’re reaching for a Level knob, an EQ
control, a Pan pot or Master slider.
About this Manual:
This manual is the compilation of many hours of discussions with engineers, musicians,
experts in the field of sound reproduction as well as novices, along with “hands-on” usage and
training. While we strive to provide as comprehensive and informative a manual as possible,
we realize we cannot convey every application imaginable or answer every possible question.
We have endeavored to cover as much as is practical in this owner’s manual and have provid-
ed suggested connection diagrams for you to use as a starting point for your application. Your
Crate Pro Audio dealer can assist you with additional information, or you can visit us on our
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
The Input Channels:
1. LOW Z INPUT: The signal output from a low impedance microphone or a low
impedance line level signal (such as a line out signal from an instrument ampli-
fier) may be connected here by means of a shielded cable terminated with a
male XLR plug. Pin 2 = “+,” pin 3 = “–,” and pin 1 = shield.
2. HIGH Z INPUT: The signal output from a high impedance microphone or a line
level signal (such as an instrument, rhythm machine, tape deck, etc.) may be
connected here by means of a shielded cable terminated with a male 1/4” plug.
Tip = “+,” ring = “–,” and sleeve = shield.
1
2
3
3. INSERT: A signal processor may be connected here by means of a shielded
stereo signal cable or shielded “Y” cord. (See page 8.) Ring = send, tip = return,
and sleeve = ground.
4. PEAK/SIGNAL LED: This LED will illuminate green when a signal is present at
the High or Low Z inputs. When the signal nears clipping, the LED will illumi-
nate red. (See Gain control, #5.)
4
5
5. GAIN: Use this control to set the input signal level for the channel. Adjust this
6
7
control so the peak LED (#4) flashes on strong signal peaks.
6. HIGH: Use this control to adjust the high frequency level for the channel. This
control allows for 15dB of cut or boost at 10kHz. Typical equalization diagrams
are shown on page 7.
8
9
7. MID: Use this control to adjust the midrange frequency level for the channel.
This control allows for 15dB of cut or boost at 2kHz. Typical equalization dia-
grams are shown on page 7.
8. LOW: Use this control to adjust the low frequency level for the channel. This
control allows for 15dB of cut or boost at 100Hz. Typical equalization diagrams
are shown on page 7.
10
11
9. AUX 1, AUX 2: Use these controls to set the channel’s output signal level at the
aux 1 and aux 2 send jacks (#17, page 5). These are pre-EQ, pre-fader, and are
typically used as monitor sends. Examples of some typical connection methods
are shown on pages 8–13.
12
13
10.AUX 3, AUX 4: Use these controls to set the channel’s output signal level at the
aux 3 and aux 4 send jacks (#17, page 5). These are post-EQ, post-fader, and
are typically used as effects loop sends. Examples of some typical connection
methods are shown on pages 8–13.
11. PAN: Use these controls to set the amount of the channel’s output signal sent to
the left and right master faders (#30, page 6) and the left and right balanced out-
put jacks (#15, page 5).
14
12.MUTE: This switch, when depressed, mutes the channel’s output signal sent to the
left, right and mix master faders (#30, 31, page 6).
13.PFL: This switch, when depressed, sends the channel’s post-EQ, pre-fader signal
to the headphones jack (#28, page 6) and the PFL output jack (#18, page 5).
14.FADER: Use this control to set the channel‘s signal level output sent to the left,
right and mix master faders (#31, 32, page 6) and the aux 3 and aux 4 send jacks
(#17, page 5).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
The Master Section:
15. LEFT, RIGHT AND MIX BALANCED OUTPUTS: Use
these jacks to send the mixer’s output signal(s) to the
house power amplifier(s) (see pages 9–13). For the XLR
jacks, pin 2 = “+,” pin 3 = “–,” and pin 1 = shield. For
the 1/4” jacks, tip = “+,” ring = “–,” and sleeve = shield.
16
16. TAPE IN/TAPE OUT JACKS: Use these jacks to connect
to the record and playback jacks of a cassette tape deck.
Because the tape in jacks are fed directly into the left
and right master faders, use the tape deck’s output level
control or an in-line attenuator to adjust the level of the
playback signal.
15
17
18
19
17. AUX SEND JACKS: Use these jacks to send the aux sig-
nals to your monitor amps and/or external effects. Aux 1
and 2 are sends only, while aux 3 and 4 can be used as
an effects loop along with the aux 3 and 4 return jacks
(#19). (See pages 8–13). The mix for each aux send jack
is set by the channel aux controls (#9, 10). The master
aux 1 fader (#30, page 6) sets the overall signal output
level for the aux 1 jack, while the aux 2, 3 and 4 send
controls (#24, page 6) set the overall signal output level
for the aux 2, 3 and 4 jacks.
20
21
18. PFL OUTPUT JACK: Use this jack to send the channel’s
PFL signal outputs to a studio monitor power
amp/speaker or to a headphone distribution box for
additional monitoring capabilities.
22
23
24
19. AUX RETURN JACKS: Use these jacks to return the
processed signal from an external effect into the master
mix. These jacks are stereo 1/4” connectors – ring =
right, tip = left, sleeve = shield.
25
26
27
28
20. POWER: This switch applies the power to the mixer. The
mixer is on when the top of the switch is depressed, off
when the bottom of the switch is depressed. The adja-
cent LED illuminates when the power is on.
29
21: OUTPUT LED METERS/PEAK INDICATORS: These LED
meters monitor the output signals sent to the balanced
output jacks (#15). The meter selector switch (#22)
determines whether the meters monitor the left and right
output signals or the aux 1 and mix output signals.
When the LEDs illuminate into the upper red areas, the
signals are near clipping and may need to be reduced to
avoid distortion.
30
31
32
22: METER SELECTOR SWITCH: When the switch is in the
out position, the LED meters (#21) monitor the left and
right output signals. When the switch is depressed, the
LED meters monitor the aux 1 and mix output signals.
(continued...–––––
>
)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
The Master Section (continued):
16
15
23: PHANTOM POWER: This switch, when depressed, applies 48
volts DC to pins 2 and 3 of the each channel’s low Z input jacks
(#1, page 4) to accommodate microphones which require a
source of phantom power for proper operation. (Mics not
requiring phantom power are not affected by the presence of the
DC voltage.)
17
18
19
24. AUX SEND LEVELS: Use these controls to set the output levels
for the signals at the aux 2, 3 and 4 send jacks (#17, page 5).
20
25. AUX RETURNS: Use these controls to adjust the level of the
signals from the aux 3 and 4 return jacks (#19, page 5).
26. AUX PANS: Use these controls to set the balance of the aux 3
21
and 4 return signal sent to the left and right master faders (#31).
27. HEADPHONES/PFL LEVEL: Use this control to adjust the output
signal level at the headphones/PFL jack (#28).
28. HEADPHONES/PFL JACK: Use this jack to connect a pair of
stereo headphones to the mixer. The signal at this jack is taken
from the PFL bus, therefore the channel PFL buttons must be
depressed in order to hear their signals through the headphones.
22
23
24
25
27
28
29. PFL LEFT/RIGHT/MIX: These switches, when depressed, send
the corresponding PFL signals to the headphones/PFL jack (#28)
and to the PFL output jack (#18).
26
30. AUX 1 MASTER FADER: Use this control to set the overall out-
put signal level at the aux 1 send jack (#17, page 5). A fader has
been chosen to provide ease of control of aux 1 since this is typ-
ically used as an output signal for the stage monitors.
29
31. LEFT/RIGHT MASTER FADERS: Use these controls to set the
overall output signal levels at the left and right balanced output
jacks (#15, page 5), as well as the signal level sent to the mix
master fader (#32).
30
31
32
32. MIX MASTER FADER: Use this control to set the overall output
signal level at the mix balanced output jacks (#15, page 5). The
left and right master faders (#31) must be set at an appropriate
level so that a signal of sufficient amplitude is sent to the mix
master fader.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
Equalization Diagrams:
Each input channel of the CSM8/12/16/24 has three bands of equalization which let you alter the tonal characteristics
of the input signal. The EQs may be used to add “color” or to compensate for inadequacies of the original signal. They also
may be used to cut frequencies to help eliminate unnatural sounds or to de-emphasize over-pronounced tones, and to help
prevent acoustic feedback. Each EQ has a range of 30dB (+/-15dB).
•The high EQ for each channel is a “shelving” type, with an action point (+6dB) at 6kHz, reaching maximum
effect at 10kHz and above.
•The middle EQ for each channel is a “peaking” type, which affects frequencies from 800Hz to 5kHz, centered
at 2kHz.
•The low EQ for each channel is a “shelving” type with an action point (+6dB) at 250Hz, reaching maximum
effect at 100Hz and below.
+20
+10
0dB
-10
-20
20
Hz
50
100
200
500
1k
2k
5k
10k
20k
Differences in Cable Types:
This manual makes reference to different types of cables; in particular, balanced and unbalanced signal cables and
speaker cables. These are not the only types of cables associated with sound reinforcement, but they are similar enough to
each other to warrant a more descriptive explanation. For example, the three 1/4”-terminated cables below may look alike
at first, but upon closer examination their differences become apparent.
BALANCED SIGNAL CABLE:
TIP
TIP
RING
TIP = SIGNAL "+" (IN-PHASE)
RING = SIGNAL "-" (OUT-OF-PHASE)
SLEEVE = SHIELD
SLEEVE
RING
SLEEVE
Care must be taken to
avoid using SIGNAL cables
in place of SPEAKER cables
and vice-versa.
UNBALANCED SIGNAL CABLE:
TIP
TIP
TIP = SIGNAL
SLEEVE = SHIELD
Signal cables aren’t made
to handle the power which
speaker cables do; speaker
cables are not shielded and
pick up external signals,
resulting in excessive hum
and buzzing.
SLEEVE
SLEEVE
SPEAKER CABLE:
TIP
TIP
TIP = SIGNAL "+"
SLEEVE = SIGNAL "-"
*Speaker cables typically do not use or require a shield.
SLEEVE
SLEEVE
BALANCED MIC CABLE:
PIN 2 = SIGNAL "+" (IN-PHASE)
PIN 3 = SIGNAL "-" (OUT-OF-PHASE)
PIN 1 = SHIELD
1
2
3
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
Connecting External Signal Processors:
There are several ways to use external signal processors with the CSM8/12/16/24. Each of the mixer’s input channels has its
own Insert jack, allowing a processor to be used on that particular channel. Figures 1 and 2 below show two ways of con-
necting a signal processor to the channel Insert jacks.
The mixer’s master section has two stereo effects loops available (Aux 3 and Aux 4), allowing a processor to be added to any
or all of the input signals. Figures 3 and 4 below show the basic connection of two types of stereo processors to the aux
loops.
Each channel’s Aux 3 and Aux 4 levels control the amount of signal sent from each channel to the aux loops. The master Aux
3 and Aux 4 Send, Return and Pan control the amount of signal sent to the processor, the amount of processed signal
returned to the mix, and how much of the processed signal is applied to the left and right output signals.
(See pages 4 through 6 for additional information on the insert jacks, the aux loops, and their controls.)
Figure 1: Connecting an external signal processor to the insert jack of the
mixer via the processor's insert jack:
Figure 2: Connecting an external signal processor to the insert jack of the mixer
via the processor's input/output jacks:
INSERT
JACK
INSERT
JACK
(TIP = RETURN,
RING = SEND,
SLEEVE = GROUND)
Crate #CYC6MS
insert adapter cable
Stereo 1/4"
T/R/S cable
INSERT
JACK
OUTPUT
JACK
INPUT
JACK
Figure 3: Connecting an external signal processor to the mixer's aux loop:
(Stereo processor with left/right output jacks)
Figure 4: Connecting an external signal processor to the mixer's aux loop:
(Stereo processor with stereo output jack)
AUX 3/
AUX 4
AUX 3/
AUX 4
SEND
JACK
AUX 3/
AUX 4
AUX 3/
AUX 4
SEND
JACK
(TIP = LEFT,
RING = RIGHT,
SLEEVE = GROUND)
(TIP = LEFT,
RING = RIGHT,
SLEEVE = GROUND)
RETURN
JACK
RETURN
JACK
Mono 1/4"
T/S cable
Mono 1/4"
T/S cable
Crate #CYC6MS
insert adapter cable
Stereo 1/4"
T/R/S cable
LEFT
OUTPUT
JACK
RIGHT
OUTPUT
JACK
STEREO
OUTPUT
JACK
INPUT
JACK
INPUT
JACK
(See your Crate Pro Audio dealer for the CYC6MS adapter cable.)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
Applications: Basic Mono Operation:
This setup shows one way of using the mixer and one stereo power amplifier to run both the house speakers and the stage
monitors. Two mono power amplifiers may be used in place of the one stereo amplifier.
Connect the components as follows:
(A) Connect a balanced or unbalanced signal cable between the mixer’s Mix Balanced Output and the power amplifier’s
Channel 1 Input.
(B) Connect a speaker cable between the power amplifier’s Channel 1 Outputs and the house speakers’ Inputs.
(C) Connect an unbalanced signal cable between the mixer’s Aux 1 Send and the power amplifier’s Channel 2 Input.
(D) Connect a speaker cable between the power amplifier’s Channel 2 Outputs and the monitor speakers’ Inputs.
(Note the optional use of a graphic equalizer in-line with the connections between the mixer and the power amplifier as shown below.)
Please note that the sample connections
shown in the Applications sections are
only guidelines. They are intended to
provide a starting point from which you
may assemble a system that will best suit
your particular needs.
HOUSE
SPEAKERS
(PS115HD,
PS215HDT,
etc.)
MONITOR
SPEAKERS
(M112HD,
Also note that the models referenced for
additional equipment are only sugges-
tions. Your Crate Pro Audio dealer can
assist you in selecting the components
best suited for your sound system.
M115HD, etc.)
CH.1
OUTPUT
CH.2
OUTPUT
B
D
STEREO
POWER AMP
(SPA1400, etc.)
CH.1
INPUT
CH.2
INPUT
CH.1
OUTPUT
CH.2
OUTPUT
DUAL
GRAPHIC EQ
(LS3231,
LS2215)
CH.1
INPUT
CH.2
INPUT
A
C
MIX
BALANCED
OUTPUT
AUX 1
SEND
L
R
CSM8/12/16/24
(PAN FULL (PAN FULL
LEFT) RIGHT)
Controlling The Mixer’s Output Levels:
• Monitors: Use the Aux 1 master slider (#30, page 6) to set the level of the output signal for the monitors.
• Mains (House Speakers): Use the Mix master slider (#32, page 6) to set the level of the output signal for the house speakers.
NOTE: The Mix output is a combination of the left and right channels. Therefore, the Left and Right master sliders (#31,
page 6) must be set so a signal of sufficient strength is available for the Mix master slider. Use the LED Output Meters
(#21, page 5) to visually monitor the output signal levels of the left and right channels.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
Applications: Basic Stereo Operation:
This setup shows one way of using the mixer and two stereo power amplifiers to run the system. By using both Aux 1 and 2
for monitor sends, a separate monitor mix can be had for each of two sets of monitor speakers.
Connect the components as follows:
(A) Connect a balanced or unbalanced signal cable between the mixer’s Left Balanced Output and the house power ampli-
fier’s Channel 1 Input. Connect the Right Balanced Output and the Channel 2 input in the same manner.
(B) Connect a speaker cable between the house power amplifier’s Channel 1 Outputs and the left house speakers’ Inputs.
Connect the Channel 2 Outputs to the right house speaker in the same manner.
(C) Connect an unbalanced signal cable between the mixer’s Aux 1 Send and the monitor power amplifier’s Channel 1
Input. Connect the Aux 2 Send to the Channel 2 input in the same manner.
(D) Connect a speaker cable between the monitor power amplifier’s Channel 1 Outputs and one set of monitor speakers’
Inputs. Connect the Channel 2 Outputs to the other set of monitors in the same manner.
(Note the optional use of graphic equalizers in-line with the connections between the mixer and the power amplifiers as shown below.)
HOUSE
SPEAKERS
(PS115HD,
PS215HDT,
MONITOR
SPEAKERS
(M112HD,
etc.)
M115HD, etc.)
D
CH.1
OUTPUT
B
CH.2
OUTPUT
CH.1
OUTPUT
CH.2
OUTPUT
STEREO
POWER AMP
(SPA1400, etc.)
STEREO
POWER AMP
(SPA1400, etc.)
CH.1
INPUT
CH.2
INPUT
CH.1
INPUT
CH.2
INPUT
CH.1
OUTPUT
CH.2
OUTPUT
CH.1
OUTPUT
CH.2
OUTPUT
DUAL
GRAPHIC EQ
(LS3231,
DUAL
GRAPHIC EQ
(LS3231,
LS2215)
LS2215)
CH.1
INPUT
CH.2
INPUT
CH.1
INPUT
CH.2
INPUT
C
A
LEFT
BAL.
OUT
RIGHT
BAL.
OUT
AUX1 AUX2
SEND SEND
L
R
CSM8/12/16/24
(PAN FULL (PAN FULL
LEFT) RIGHT)
(PANS AS NEEDED)
Controlling The Mixer’s Output Levels:
• Monitors: Use the Aux 1 master slider (#30, page 6) to set the level of the output signal for one set of monitors and the
Aux 2 Send Level (#24, page 6) to set the level of the output signal for the other set of monitors.
• Mains (House Speakers): Use the Left and Right master sliders (#31, page 6) to set the levels of the output signals for the
house speakers.
• Channels: Use the channel Pan controls (#11, page 4) to adjust the level of the signal sent to the left or right outputs. Use
the Aux 1 and Aux 2 controls (#9, page 4) to adjust the mix of the signals sent to the monitors.
1 0
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
Applications: DJ Setup:
This setup shows one way of using the mixer and one stereo power amplifier to run the house speakers for a mobile DJ
setup. Two mono power amplifiers may be used in place of the one stereo amplifier.
Connect the components as follows:
(A) Connect a balanced or unbalanced signal cable between the mixer’s Left Balanced Output and the house power ampli-
fier’s Channel 1 Input. Connect the Right Balanced Output and the Channel 2 input in the same manner.
(B) Connect a speaker cable between the house power amplifier’s Channel 1 Outputs and the left house speakers’ Inputs.
Connect the Channel 2 Outputs to the right house speaker in the same manner.
(Note the optional use of a graphic equalizer in-line with the connections between the mixer and the power amplifier as shown below.)
HOUSE
SPEAKERS
(PS115HD,
PS215HDT,
etc.)
CH.1
OUTPUT
B
CH.2
OUTPUT
STEREO
POWER AMP
(SPA1400, etc.)
CH.1
INPUT
CH.2
INPUT
CH.1
OUTPUT
CH.2
OUTPUT
DUAL
GRAPHIC EQ
(LS3231,
LS2215)
CH.1
INPUT
CH.2
INPUT
A
LEFT
BAL.
OUT
RIGHT
BAL.
OUT
L
R
L
R
L
R
CSM8/12/16/24
(PAN FULL (PAN FULL
LEFT) RIGHT)
(PAN FULL (PAN FULL (PAN FULL (PAN FULL
LEFT) RIGHT) LEFT) RIGHT)
Controlling The Mixer’s Output Levels:
• Mains (House Speakers): Use the Left and Right master sliders (#31, page 6) to set the levels of the output signals for the
house speakers.
• Channels: Use the channel Pan controls (#11, page 4) to determine which channel signals are sent to the left and/or right
outputs.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
Applications: House of Worship Installation:
This setup shows one way of using the mixer and one stereo power amplifier to run both the house speakers and the stage
monitors. Two mono power amplifiers may be used in place of the one stereo amplifier.
Connect the components as follows:
(A) Connect a balanced or unbalanced signal cable between the mixer’s Left Balanced Output and the house power ampli-
fier’s Channel 1 Input. Connect the Right Balanced Output and the Channel 2 input in the same manner.
(B) Connect a speaker cable between the house power amplifier’s Channel 1 Outputs and the left house speakers’ Inputs.
Connect the Channel 2 Outputs to the right house speaker in the same manner.
(C) Connect an unbalanced signal cable between the mixer’s Aux 1 Send and the monitor power amplifier’s Input.
(D) Connect a speaker cable between the monitor power amplifier’s Outputs and the monitor speakers’ Inputs.
(E) Connect an unbalanced signal cable between the mixer’s Aux 2 Send and the radio feed for broadcasting purposes.
(Note the optional use of graphic equalizers in-line with the connections between the mixer and the power amplifiers as shown below.)
HOUSE
SPEAKERS
MONITOR
SPEAKERS
(M112HD,
(PS115HD,
PS215HDT,
etc.)
M115HD, etc.)
CH.1
OUTPUT
B
CH.2
OUTPUT
MONO
OUTPUT
D
STEREO
POWER AMP
(SPA1400, etc.)
MONO
POWER AMP
(SPA1400, etc.
in Bridged Mode)
CH.1
INPUT
CH.2
INPUT
CH.1
CH.2
OUTPUT
OUTPUT
MONO
INPUT
DUAL
GRAPHIC EQ
(LS3231,
OUTPUT
GRAPHIC EQ
(LS1131,etc.)
LS2215)
CH.1
INPUT
CH.2
INPUT
INPUT
C
A
RADIO FEED
PULPIT MIC, LAVALIER MIC, INSTRUMENTS,
VOCAL MICS
E
LEFT
BAL.
OUT
RIGHT
BAL. AUX1
OUT SEND
AUX2
SEND
L
R
L
R
CSM8/12/16/24
(PAN FULL (PAN FULL (PAN FULL (PAN FULL
LEFT) RIGHT) LEFT) RIGHT)
(PANS AS NEEDED)
Controlling The Mixer’s Output Levels:
• Monitors: Use the Aux 1 master slider (#30, page 6) to set the level of the output signal for the monitors.
• Mains (House Speakers): Use the Left and Right master sliders (#31, page 6) to set the levels of the output signals for the
house speakers.
• Channels: Use the channel Pan controls (#11, page 4) to determine which channel signals are sent to the left and/or right
outputs.
• Radio Feed: Use the channels’ Aux 2 controls (#9, page 4) and the master Aux 2 Send control (#24, page 6) to set the lev-
els of the signal sent to the radio feed, if broadcasting.
1 2
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
Applications: Separating Vocals and Instruments:
This setup shows one way of using the mixer, one stereo and one mono power amplifier to run the system. Two sets of
house speakers are required in this application: one for the vocals, the other for the instruments.
Connect the components as follows:
(A) Connect a balanced or unbalanced signal cable between the mixer’s Left Balanced Output and the house power ampli-
fier’s Channel 1 Input. Connect the Right Balanced Output and the Channel 2 input in the same manner.
(B) Connect a speaker cable between the house power amplifier’s Channel 1 Outputs and the “instruments” house speak-
ers’ Inputs. Connect the Channel 2 Outputs to the “vocals” house speaker in the same manner.
(C) Connect an unbalanced signal cable between the mixer’s Aux 1 Send and the monitor power amplifier’s Input.
(D) Connect a speaker cable between the monitor power amplifier’s Channel 1 Outputs and the monitor speakers’ Inputs.
(Note the optional use of graphic equalizers in-line with the connections between the mixer and the power amplifiers as shown below.)
INSTRUMENTS
VOCALS
HOUSE
SPEAKERS
(PS115HD,
PS215HDT,
etc.)
MONITOR
SPEAKERS
(M112HD,
M115HD, etc.)
CH.1
OUTPUT
B
CH.2
OUTPUT
MONO
OUTPUT
D
STEREO
POWER AMP
(SPA1400, etc.)
MONO
POWER AMP
(SPA1400, etc.
in Bridged Mode)
CH.1
INPUT
CH.2
INPUT
CH.1
CH.2
OUTPUT
OUTPUT
MONO
INPUT
DUAL
GRAPHIC EQ
(LS3231,
OUTPUT
GRAPHIC EQ
(LS1131,etc.)
LS2215)
CH.1
INPUT
CH.2
INPUT
INPUT
C
A
VOCAL MICS
INSTRUMENTS
LEFT
BAL.
OUT
RIGHT
BAL.
OUT
AUX1
SEND
CSM8/12/16/24
(PAN FULL
RIGHT)
(PAN FULL
RIGHT)
(PAN FULL (PAN FULL
RIGHT) RIGHT)
(PAN FULL (PAN FULL (PAN FULL (PAN FULL
LEFT) LEFT) LEFT) LEFT)
Controlling The Mixer’s Output Levels:
• Monitors: Use the Aux 1 master slider (#30, page 5) to set the level of the output signal for the monitors.
• Mains (House Speakers): Use the Right master slider (#31, page 6) to set the level of the output signal for the house
“vocal” speakers. Use the Left master slider (#31, page 6) to set the level of the output signal for the “instrument” house
speakers.
• Channels: Use the channel Pan controls (#11, page 4) to send the vocal channels to the right channel only and the instru-
ment channels to the left channel only.
1 3
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
System Block Diagram:
L
R
A
2
A
A
P
MIX
LA
LA
LEFT
TAPE OUT
SUM
RIGHT
TAPE OUT
PHANTOM
+48V
LEFT
OUT
LA
LA
LA
R
R
R
PFL LEFT
POWER
T
T
T
LEFT
(BAL.)
FADER
ON
OFF
SUM
AUX 1
AUX 2
AUX 3
AUX 4
LEFT
OUT
(BAL.)
LOW Z
HIGH Z
PEAK/
SIGNAL
RIGHT
OUT
(BAL.)
PFL RIGHT
RIGHT
FADER
SUM
R
TYPICAL
HA
T
T
RIGHT
OUT
(BAL.)
INPUT
CHANNEL
GAIN
PFL MIX
MIX
OUT
(BAL.)
INSERT
MIX
FADER
R
MUTE
EQ
BA
MIX
OUT
(BAL.)
PAN
CHANNEL
FADER
PFL
LA
LA
HIGH MID LOW
R
R
PFL
SUM
T
T
OUT
LA
LA
HEAD
PHONES
OUT
BA
BA
R
AUX 3
RETURN
PAN
T
HEADPHONES
LEVEL
LEFT LED
DISPLAY &
PEAK LED
AUX 3
RETURN
RIGHT LED
DISPLAY &
PEAK LED
BA
BA
LED DISPLAY
SELECT SWITCH
R
AUX 4
RETURN
PAN
T
SUM
SUM
SUM
SUM
AUX 1
AUX 1
SEND
FADER
AUX 3
RETURN
AUX 2
SEND
AUX 2
LEVEL
LEFT
TAPE IN
BA
BA
AUX 3
SEND
AUX 3
LEVEL
RIGHT
TAPE IN
AUX 4
SEND
AUX 4
LEVEL
1 4
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
Gain Level Diagram:
MIC
EQ
MASTER
FADER
FADER
PAN
GAIN
LINE
INSERT
+30
+21dB
+21dB
MAX LINE +26dB
+20
MAX. INPUT - SET GAIN AS NECESSARY
+3dB
MAIN OUT
+4dB
+15dB
MAX MIC +13dB
LINE -35dB
+10
0
ALL LEVELS @NOMINAL,
-10
-20
-30
-40
-50
-60
-70
-7dB
GAINS @"10"
-13dB
-23dB
-17dB
FULL GAIN
MIC -49dB
LINE -55dB
MIC -72dB
-120
dB
NOISE FLOOR -120dB
1 5
Download from Www.Somanuals.com. All Manuals Search And Download.
CSM8/12/16/24 Console Mixer
Technical Specifications
SYSTEM INPUTS
TAPE INS / TAPE OUTS
CSM8
8 mono mic/line input channels
RCA jacks
47k ohm input impedance
CSM12
CSM16
CSM24
All models
12 mono mic/line input channels
16 mono mic/line input channels
24 mono mic/line input channels
2 stereo effects returns
+4dBv (1.23V RMS) @ High-Z nominal output
-10dBv (.245V RMS)
Max.Input Accepted +30dBv (24.5V RMS)
Max. Sensitivity
AUX SEND
1/4” phone jacks
1 stereo tape input
+4dBv (1.23V RMS) @ High-Z nominal output
INPUT CHANNELS
Low-Z Mic
PHANTOM POWER
+48VDC applied to pins 2 and 3 of XLR inputs
1 3-pin “XLR” (balanced, pin 2 = “in phase”)
Transformerless electronically balanced
1k ohm load impedance
1 1/4” phone jack (balanced)
10k ohm load impedance
LEFT & RIGHT OUTPUTS
Unbalanced out @ 10k ohm load impedance
Balanced @ 3k ohm load impedance
+4dBv (1.23V RMS) nominal output
18dBv (6V RMS) max. output
High-Z Line
EQUIVALENT INPUT NOISE
Typically -127dB @ 20 - 12k equivalent bandwidth unweighted
with 200 ohm source impedance
DUAL OUTPUT LED/PEAK INDICATORS
Type
Calibration
Range
11 LED quasi-peak
Calibrated to indicate +4dBv @ 8th LED
-14dBv to +20dBv
COMMON MODE REJECTION
Typically -90dB min., -70dB @ 50Hz
PEAK INDICATOR Indicates point of clipping
Signals Read
Left and Right Main Outs or Aux 1 and Mix
MAXIMUM SIGNAL ACCEPTED
RESIDUAL NOISE
Low-Z Mic
High-Z Line
3.46V RMS (13dBv)
15.9V RMS (26dBv)
90dB below 1.23V RMS min. with all levels down
70dB below 1.23V RMS with Master Level up full and one chan-
nel up full
CHANNEL GAIN
Typically 65dB adjustment range
TOTAL HARMONIC DISTORTION
< 0.1% @ 1kHz input @ 5V RMS output (typically 0.05%) mea-
sured from Mic In to Main Out (EQ flat) with Master @ nominal
“0” setting (-10dB from max. gain), and Gain and Channel Level
at max. (At lower input signal levels, measurement is limited by
the noise floor)
CHANNEL INPUT SENSITIVITY
Low-Z Mic
All levels up: 8.7mV RMS max. (43dB gain)
Channel up only: 2.7mV RMS max. (53dB gain)
Gain, channel fader, master fader at max:
.28mV. max. (76dB gain)
High-Z Line
All levels up: 87mV RMS max. (23dB gain)
Channel up only: 27mV RMS max. (33dB gain)
Gain, channel fader, master fader at max:
28mV. max. (59dB gain)
SIZE AND WEIGHT
CSM8
20.25” W x 4.25” H x 16.5” D, 21 lbs
(514mm x 108mm x 419mm, 9.5kg)
CSM12
CSM16
CSM24
25.13” W x 4.25” H x 16.5” D, 25 lbs
(638mm x 108mm x 419mm, 11.4kg)
CHANNEL EQ (ACTIVE)
High
Mid
Low
+/-15dB @ 10kHz shelving
+/-15dB @ 2kHz bandpass
+/-15dB @ 100Hz shelving
29.75” W x 4.25” H x 16.5” D, 30 lbs
(756mm x 108mm x 419mm, 13.6kg)
40.75” W x 4.25” H x 16.5” D, 39 lbs
(1035mm x 108mm x 419mm, 17.7kg)
AUX RETURNS 3 & 4
1/4” stereo phone jacks 22k ohm input impedance
Max. Sensitivity -26dBv (80mV RMS)
Max.Input Accepted +30dBv (24.5V RMS)
POWER REQUIREMENTS
120VAC 1A
Due to ongoing product development and improvement, the specifications
contained herein are subject to change without notice.
©1999 SLM Electronics, Inc. • A Division of St. Louis Music, Inc.
1400 Ferguson Avenue • St. Louis, MO 63133
18-024-01 • 10/99
Download from Www.Somanuals.com. All Manuals Search And Download.
|