IMI CORNELIUS REMCOR INC g 500 REGENCY DRIVE g GLENDALE HEIGHTS, IL 60139--2268
Telephone (800) 551--4423 Facsimile (800) 519--4423
KIT P/N 629087401
DRAIN LINE SUPPORT INSTALLATION INSTRUCTIONS
Read and understand these instructions thoroughly before installing this kit. Retain these instructions as part of
your equipment manual.
INSTALLATION PROCEDURE FOR FLAT FLOOR DRAINS
1. Mount the wire form support in the center of the floor drain
grid and clamp it’s four legs of the support onto the drain grid
securely. If necessary, reform the legs to fit and attach firmly to
the drain grid. The clamps are omitted for clarity on the first two
illustrations.
2. Place the plastic splashguard collar over the
wire form support.
3. The adjustable clamps will accomodate
1/2-- inch, 3/4--inch, and 1--inch I.D. either
soft or ridgid (hard) PVC tubing. Squeezing
the two tabs together that are located on
the clamp--locking collar will loosen a
tightened clamp.
Revised: 12/22/99
November 4, 1999
Rev B
EIMI Cornelius Inc; 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
|