Cooper Bussmann Automobile Parts HPC D User Manual

®
Bussmann  
Panel-Mount Fuseholder  
HPC-D  
For ⁄‹Ω£™∑ ≈ 1⁄Ω™∑ Fuses  
Dimensional Data: All other dimensions (±0.015).  
With Fuse  
2.48" Max.  
(63.1mm)  
0.88"  
(22.2mm)  
1.775"  
(45.1mm)  
F
0.180"  
(4.6mm)  
1.120"  
(30.5mm)  
Mounting Hole  
Mounting Hole  
Flange Rear of Panel  
Catalog Symbol: HPC-D  
Panel-Mount  
Agency Information:  
Flange Front of Panel  
+
+
1.031" 0.003"  
(26.2mm 0.08mm)  
UL Recognized, Guide IZLT2, File E14853  
Flammability Rating: UL 94 HB  
+
0.187" 0.002"  
+
(4.75mm 0.05mm)  
+
+
1.312" 0.003"  
1.312" 0.003"  
+
0.890" 0.003"  
+
+
(33.3mm 0.08mm)  
(33.3mm 0.08mm)  
+
(22.6mm 0.08mm)  
Electrical Ratings  
Catalog  
Maximum panel thickness, mounting flange in front of panel  
Assumes Pollution Degree 3 per UL 840:  
Conductive pollution, or dry, nonconductive pollution that  
becomes conductive due to condensation that is expected.  
Symbol  
Amps  
Volts AC  
Description  
(3)  
HPC-D  
(1)  
30  
600  
No UL Recognition  
Maximum panel thickness not including any sealing gaskets.  
(3)  
20A max when used with quick-connect terminals.  
System Voltage  
600V  
mm Inches mm Inches mm Inches mm Inches mm Inches  
** ** 0.87 1/32” 5.14 3/16” 5.69 7/32” 7.17 9/32”  
480  
277  
240  
120  
Fuseholder  
HPC-D  
Replacement knob -BK/9987SA  
Thicker panels may be used if fuse holder load terminal is fully insulated, using a  
UL recognized (VW-1) insulative heat-shrink tubing, or if anticipated environment  
is of Pollution Degree 1 or 2, or if panel is nonconductive.  
Pollution Degree 2- Normally, only nonconductive pollution. However, a temporary  
conductivity caused by condensation may be expected.  
Pollution Degree 1- No pollution or only dry, nonconductive pollution.  
The pollution has no influence.  
CE logo denotes compliance with European Union Low Voltage Directive  
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact  
Bussmann Application Engineering at 314-527-1270 for more information.  
Maximum panel thickness, mounting flange behind the panel:  
5.08mm/0.200” (flush to knob collar)  
General Information:  
• Screw-type knob.  
• Supplied with “O”-ring and panel gasket.  
• Military version designated FHN23W.  
• Do not put tension on line (rear) terminal.  
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is  
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change  
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-  
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.  
Form No. HPC-D  
Page 1 of 1  
Data Sheet: 2109  
SB04184  
6-3-04  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Clarion CD Player DXZ935 User Manual
Crosley Washer NLPWD15 User Manual
Crown Microphone PZM 11 User Manual
Cuisinart Griddle GR 150 User Manual
Cuisinart Water Dispenser WCH 950C User Manual
Dixon Lawn Mower 52 27 KOH 60 27 KOH 60 30 KOH 72 27 KOH User Manual
Elation Professional Snow Blower S 100 II User Manual
Euro Pro Blender BP101H3 User Manual
EverFocus Security Camera EZ600 B User Manual
Fundex Games Board Games 2570 User Manual