Xtreme/SBC PCIe/104 Single Board Computer
& PCIe/104 Qseven Carrier Board
User Manual
Connect Tech Inc.
42 Arrow Road
Guelph, Ontario
N1K 1S6
Tel:
519-836-1291
Toll:
Fax:
800-426-8979 (North America only)
519-836-4878
Email: [email protected]
Web: www.connecttech.com
CTIM-000058 Revision 0.02 March 8, 2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Dimensions....................................................................................................................................................26
Revision 0.02
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Customer Support Overview
If you experience difficulties after reading the manual and/or using the product, contact the
Connect Tech reseller from which you purchased the product. In most cases the reseller can help
you with product installation and difficulties.
In the event that the reseller is unable to resolve your problem, our highly qualified support staff
can assist you. Our support section is available 24 hours a day, 7 days a week on our website at:
www.connecttech.com/sub/support/support.asp. See the contact information section below for
more information on how to contact us directly. Our technical support is always free.
Contact Information
We offer three ways for you to contact us:
Mail/Courier
You may contact us by letter at:
Connect Tech Inc.
Technical Support
42 Arrow Road
Guelph, Ontario
Canada N1K 1S6
Email/Internet
You may contact us through the Internet. Our email and URL addresses on the Internet are:
Note:
Tech website for product manuals, installation guides, device driver software and technical tips.
on the Connect Tech website.
Telephone/Facsimile
Technical Support representatives are ready to answer your call Monday through Friday, from
8:30 a.m. to 5:00 p.m. Eastern Standard Time. Our numbers for calls are:
Toll Free: 800-426-8979 (North America only)
Telephone: 519-836-1291 (Live assistance available 8:30 a.m. to 5:00 p.m. EST,
Monday to Friday)
Facsimile: 519-836-4878 (on-line 24 hours)
4
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Limited Lifetime Warranty
Connect Tech Inc. provides a Lifetime Warranty for all Connect Tech Inc. products. Should this
product, in Connect Tech Inc.'s opinion, fail to be in good working order during the warranty
period, Connect Tech Inc. will, at its option, repair or replace this product at no charge, provided
that the product has not been subjected to abuse, misuse, accident, disaster or non-Connect Tech
Inc. authorized modification or repair.
You may obtain warranty service by delivering this product to an authorized Connect Tech Inc.
business partner or to Connect Tech Inc. along with proof of purchase. Product returned to
Connect Tech Inc. must be pre-authorized by Connect Tech Inc. with an RMA (Return Material
Authorization) number marked on the outside of the package and sent prepaid, insured and
packaged for safe shipment. Connect Tech Inc. will return this product by prepaid ground
shipment service.
The Connect Tech Inc. Lifetime Warranty is defined as the serviceable life of the product. This is
defined as the period during which all components are available. Should the product prove to be
irreparable, Connect Tech Inc. reserves the right to substitute an equivalent product if available or
to retract Lifetime Warranty if no replacement is available.
The above warranty is the only warranty authorized by Connect Tech Inc. Under no
circumstances will Connect Tech Inc. be liable in any way for any damages, including any lost
profits, lost savings or other incidental or consequential damages arising out of the use of, or
inability to use, such product.
Copyright Notice
The information contained in this document is subject to change without notice. Connect Tech
Inc. shall not be liable for errors contained herein or for incidental consequential damages in
connection with the furnishing, performance, or use of this material. This document contains
proprietary information that is protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, or translated to another language without the prior
written consent of Connect Tech, Inc.
Copyright 1997 - 2010 by Connect Tech, Inc.
Trademark Acknowledgment
Connect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred
to in this document as the property of their respective owners.
Not listing all possible trademarks or copyright acknowledgments does not constitute a lack of
acknowledgment to the rightful owners of the trademarks and copyrights mentioned in this
document.
Revision History
Revision 0.00 – May 28, 2010
Revision 0.01 – August 18, 2010
Revision 0.02
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Introduction
Connect Tech’s Xtreme/SBC is a small embedded carrier board that utilizes the PCI/104-Express
form factor, which has the standard PC/104 dimensions with 4 x1 PCIe lanes. This carrier board
includes the required connectors and cables for easy connection to 2x SATA, 2x RS-232, 2x RS-
422/485, 4x USB 2.0, 1x Gigabit Ethernet, LVDS and VGA Video.
The PCIe/104 Single Board Computer allows complete integration with any industry standard
Qseven module, transforming it into a robust Single Board Computer (SBC) in the PC/104 form
factor. Xtreme/SBC is ideal for a broad range of embedded applications. The Qseven standard
allows upgrading to the latest processor and memory technology with ease, while maintaining the
I/O interfaces.
Features
Qseven module carrier
PCIe-104 form factor
Four x1 PCIe Lanes
Dual display, VGA (via SDVO) and 1x24 LVDS
2x SATA
2x RS232
2x RS485
1x 10/100/1000 Ethernet
ATX power input or +5V/+12V only operation
What is Qseven?
Qseven is a standard that enables integration of Computer-on-Modules with mobile and embedded
applications. To learn more about Connect Tech’s PCIe/104 Single Board Computer, visit
6
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
System Block Diagram
The Qseven module implements the core processing features including: processor, memory, and system
physical interfaces via the southbridge.
Many of the Qseven modules are based on the mobile Intel Atom architecture (Z series processor + Poulsbo
/ SCH US15W chipset); shown in the block diagram below.
This document will generally refer to the features of the US15W.
Revision 0.02
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Hardware Description
Connector Locations
PCI/104-Express Single Board Computer – Top
PCI/104-Express Single Board Computer – Bottom
Connector Summary
Jumper Summary
Location
Connection
P1
P2
Q7
PCIe-104
USB
Jumper
Function
P3A, P3B
P4
J1
J2
J3
J4
PS/2 power
Fan Power
GBE
P5
VGA
Fan PWM polarity
LVDS panel power
P6
ATX Power
LVDS Video
LVDS Backlight
RS232 serial
SATA
P7
LVDS backlight
enable polarity
P8
J5
J6
P9
LVDS Backlight
Power
P10A, P10B
P11
RS485 serial
PCI-104
J7
J8
J9
Suspend Selection
Power Supply On
Power Button
P12
P13
PS/2 Keyboard &
Mouse
P14
P16
Fan Power
Battery holder
8
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Qseven Module Interface
Description
The processor and Chipset are implemented on the Qseven CPU module, which connects to the
Xtreme/SBC via a MXM connector. As previously mentioned, many of the existing Qseven Modules use
the Intel Atom mobile architecture, Z series processor + Poulsbo / SCH US15W chipset. The Xtreme/SBC
implements a subset of the Qseven features, as describe in the introduction.
For a list of Qseven module vendors, visit http://www.qseven-standard.org/
Connector
Function Qseven interface
P1
Location
Type
MXM
Foxconn AS0B326-S78N-7F (or equivalent)
Refer to Qseven specification
Pinout
Graphics
The availability of the graphics interfaces depends on the Qseven module selected.
US15W: The US15W chipset provides GMA 500 graphics sub-system and provides two display interfaces:
SDVO (serial digital video output) and LVDS (low voltage differential signalling). The resolution is
generated by the by GMA 500 is limited 1280x1024.
The configuration of either interface as the primary or secondary display depends on the Qseven module’s
BIOS capabilities and settings. Refer to the Qseven module’s documentation for more details.
VGA
Description
The VGA interface is implemented using the Qseven SDVO interface, with a SDVO to VGA converter
(Chrontel CH7317B) which supports resolutions up to 1920x1200; however actually resolutions depend on
the Qseven module.
Connector
Function VGA graphics
P5
Location
Type
2x5 2mm header
MLE TSHSM-205-D-06-G-V-L (or equivalent)
Pinout
Pin
1
Signal
DAC_RED
DAC_GREEN
DAC_BLUE
HSYNC
Pin
2
Signal
GND
3
4
N/C
5
6
SC_DDC
SD_DDC
GND
7
8
9
VSYNC
10
Revision 0.02
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
LVDS
Description
The Xtreme/SBC provides dual 18 or 24 bit LVDS display channels via P7, which are connected directly
from the Qseven module . LVDS panel supply power is selected with jumper J4 and backlight power is
selected with jumper J6. Both are current limited to 500 mA.
US15W: The US15W provides only a single 18 or 24 bit display channel. Each LVDS data pair carries two
bits, each channel has four data pairs.
Connectors & Jumpers
Function LVDS Graphics
P7
Location
Type
Hirose DF14-30P-1.25H connector
Pinout
Pin
1
Signal
VCC_PNL
Description
Panel Power
2
VCC_PNL
Panel Power
3
GND
Digital ground
4
GND
Digital ground
5
LVDS_A3_N
LVDS_A3_P
LVDS_CLK_N
LVDS_ACLK_P
GND
Channel A Data
Channel A Data
Channel A Clock
Channel A Clock
Digital ground
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
LVDS_A2_N
LVDS_A2_P
LVDS_A1_N
LVDS_A1_P
LVDS_A0_N
LVDS_A0_P
GND
Channel A Data
Channel A Data
Channel A Data
Channel A Data
Channel A Data
Channel A Data
Digital ground
LVDS_B3_N
LVDS_B3_P
LVDS_BCLK_N
LVDS_BCLK_P
GND
Channel B Data
Channel B Data
Channel B Clock
Channel B Clock
Digital ground
LVDS_B2_N
LVDS_B2_P
LVDS_B1_N
LVDS_B1_P
LVDS_B0_N
LVDS_B0_P
GND
Channel B Data
Channel B Data
Channel B Data
Channel B Data
Channel B Data
Channel B Data
Digital ground
LVDS_DID_CLK
Display ID Clock
(3.3V)
30
LVDS_DID_DATA Display ID Data (3.3V)
10
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Function LVDS backlight power
P8
Location
Type
Hirose DF13-8P-1.25H connector
Pinout
Pin
1
Signal
+12V
+12V
+5V
Description
+12 V DC, max. 1A
+12 V DC, max. 1A
+5 V DC, max. 1A
+5 V DC, max. 1A
2
3
4
+5V
Backlight enable,
level selected with J4
5
6
LVDS_BLEN
VCC_BKL
Back light power,
selected with J6
7
8
GND
GND
Digital ground
Digital ground
Function LVDS backlight power select
Selects either +12V or +5V. Refer to the
display panel’s documentation for proper
configuration.
J6
Location
Type
1x3 0.100” jumper block
Pinout
Position
1-2
Description
+12V
+5V
2-3
off
floating
Default
+12V
Function LVDS panel power select
Selects either +3.3V or +5V. Refer to the
display documentation for proper
configuration.
J4
Location
Type
1x3 0.100” jumper block
Pinout
Position
Description
1-2
2-3
off
+5V
+3.3V
floating
Default
+3.3V
* Note the silk screen labels +5V and +3.3V are reversed on Revision A.
Revision 0.02
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Function LVDS backlight enable polarity
Selects either positive or negative. Refer to the inverter
power supply documentation for proper configuration.
J5
Location
Type
1x2 2mm jumper block
Pinout
Position
off
Description
Positive polarity
Negative polarity
on
Default
Positive polarity
Gigabit Ethernet
Description
The gigabit Ethernet interface’s controller (MAC + PHY) is implemented on the Qseven module, while the
Xtreme/SBC provides the necessary magnetics and termination.
Most Qseven modules support 1000BASE-T, 100BASE-TX, and 10BASE-T standards with either a
Realtek 8111 or Intel 82574 PCIe Ethernet controller.
Connector & LEDs
Function Gigabit Ethernet
P8
Location
Type
2x5 2mm header
MLE TSHSM-205-D-06-G-V-L (or equivalent)
Pinout
Pin Signal Description Pin Signal Description
1
3
5
MX1-
MX2-
FGND
Data
Data
2
4
6
MX1+
MX2+
FGND
Data
Data
Frame
Frame
Ground
Ground
7
9
MX3-
MX4-
Data
Data
8
MX3+
MX4+
Data
Data
10
Function Ethernet Status LEDs
Locations
Pin
Signal
D9
Activity
D10 1000BASE-T Link
D11 100BASE-TX Link
D12
10BASE-T Link
12
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
USB 2.0
Description
The Xtreme/SBC implements 4 of the 8 available USB 2.0 connections via two connectors. Over current
protection and power supply filtering is provided.
Only the USB host features of the Qseven specification have been implemented, USB client features are
not supported.
Connector
Function USB 2.0 x2
P3A, P3B
Locations
Type
Hirose DF13-8P
Pinout
Pin
1
Signal
Description
Port 0 Filtered +5V
Port 0 Data
VCC_USB_0
USB_0_N
2
3
USB_0_P
Port 0 Data
4
USB_GND_0
USB_GND_1
USB_1_N
Port 0 Filtered Digital Ground
Port 1 Filtered Digital Ground
Port 1 Data
5
6
7
USB_1_N
Port 1 Data
8
VCC_USB_1
Port 1 Filtered +5V
SATA
Description
The Xtreme/SBC provides 2 SATA host connections.
US15W: Most Qseven modules based on the US15W, convert the US15W’s IDE interface to one SATA
connection (as IDE master) and one built-in NAND based flash drive (as IDE slave). Consult the Qseven
module’s documentation for more information.
In this case only P10A connector is active
Revision 0.02
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Connector & LEDs
Function SATA host
P10A, P10B
Locations
P10A
Industry standard right angle sata host
connector
Type
Molex 0470804005 (or equivalent)
Pinout
Pin
1
Signal
GND
2
SATA_TX_P
SATA_TX_N
GND
P10B
3
4
5
SATA_RX_N
SATA_RX_P
GND
6
7
Function SATA Status LEDs
Locations
Pin
Signal
D13
Activity
PCI/104-Express
Description
The Xtreme/SBC provides 4 x1 PCIe lanes to the PCI/104-Express connector; allowing four PCIe-104
boards to be stacked on top. The 4 x1 PCIe lanes are implemented via an IDT 1-4 PCIe switch, consuming
only one of the available PCIe lanes from the Qseven modules. Most US15W Qseven modules expose only
one PCIe lane.
Note: The Xtreme/SBC provides 3.3V generated from the ATX +5V input power. It is limited to 3.5A.
Connectors
Function PCIe-104 top mount
P2
Locations
Industry standard
Samtec ASP-129637-03
Type
The following table indicates which of the PCIe-104
signals are connected
Pinout
14
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Pin Description Pin Description Pin
Description
N/C
1
N/C
PE_RST#
+3.3V
53
WAKE#
105
2
54 PEG_ENA# 106
N/C
3
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
GND
GND
N/C
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
GND
GND
N/C
4
+3.3V
5
N/C
6
N/C
N/C
N/C
7
N/C
N/C
N/C
8
N/C
N/C
N/C
9
GND
GND
GND
N/C
GND
GND
N/C
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
GND
PEx1_1Tp
PEx1_0Tp
PEx1_1Tn
PEx1_0Tn
GND
N/C
N/C
N/C
N/C
N/C
N/C
GND
GND
N/C
GND
GND
N/C
GND
PEx1_2Tp
PEx1_3Tp
PEx1_2Tn
PEx1_3Tn
GND
N/C
N/C
N/C
N/C
N/C
N/C
GND
GND
N/C
GND
GND
N/C
GND
PEx1_1Rp
PEx1_0Rp
PEx1_1Rn
PEx1_0Rn
GND
N/C
N/C
N/C
N/C
N/C
N/C
GND
GND
N/C
GND
GND
N/C
GND
PEx1_2Rp
PEx1_3Rp
PEx1_2Rn
PEx1_3Rn
GND
N/C
N/C
N/C
N/C
N/C
N/C
GND
GND
N/C
GND
GND
N/C
GND
35 PEx1_1Clkp 87
36 PEx1_0Clkp 88
37 PEx1_1Clkn 89
38 PEx1_0Clkn 90
N/C
N/C
N/C
N/C
N/C
N/C
39
40
+5V_SB
+5V_SB
91
92
GND
GND
N/C
GND
GND
N/C
41 PEx1_2Clkp 93
42 PEx1_3Clkp 94
43 PEx1_2Clkn 95
44 PEx1_3Clkn 96
N/C
N/C
N/C
N/C
N/C
N/C
45
CPU_DIR
97
GND
GND
N/C
GND
GND
N/C
46 PWRGOOD 98
47
48
49
50
SMB_DAT
N/C
99
100
N/C
N/C
SMB_CLK 101
N/C 102
N/C
N/C
N/C
N/C
51 SMB_ALERT 103
52 PSON# 104
GND
GND
GND
GND
Revision 0.02
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
PCI-104 top mount – mechanical only, does
not carry signals
Function
P12
Locations
Type
Industry standard
EPT 264-60303-02
Connector is not populated by default.
Can be installed on request.
Note
LPC Super I/O
The Xtreme/SBC implements many low speed legacy I/O features with the SMSC SCH3114 Super I/O,
which is connected to the Qseven module via the LPC (Low Pin Count) bus. This Super I/O device
provides 4 serial ports, 2 PS/2, and many other status / control features.
Note: the Qseven specification states that all Qseven modules BIOS implementations must support either
the Winbond W83627 or SMSC SCH3114.
16
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Serial
Description
Two RS232 serial ports are provided on P9 and two RS485 serial ports are provided on P11.
For the RS485 ports, the default configuration is full duplex without any bias or termination. Various
resistors configurations can be populated to enabled TX and RX termination as well as RTS control. The
following diagram shows the available configuration options. Contact Connect Tech’s support department
for further information.
Resistor
R99
Function
Default
Populated
Populated
Always enable driver
Always enable receiver
RTS controlled receiver
RTS controlled driver
Receiver termination
Driver termination
Receiver bias
R101
R156
R160
R98
R102
R100
R97
Receiver bias
Revision 0.02
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Connectors
Function RS232 x2
P9
Locations
Type
2x10 2mm header
Pinout
Pin
1
Signal
DCD1
RXD1
TXD1
DTR1
GND
Pin
2
Signal
DSR1
RTS1
CTS1
RI1
3
4
5
6
7
8
9
10
12
14
16
18
20
N/C
11
13
15
17
19
DCD2
RXD2
TXD2
DTR2
GND
DSR2
RTS2
CTS2
RI2
N/C
Function RS485 x2
P11
Locations
Type
2x10 2mm header
Pinout
Pin
1
Signal
RXD0+
TXD0+
TXD0-
RXD0-
GND
Pin
2
Signal
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
3
4
5
6
7
8
9
10
12
14
16
18
20
11
13
15
17
19
RXD1+
TXD1+
TXD1-
TXD1-
GND
N/C
18
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
PS/2 Keyboard and Mouse
Description
A PS/2 keyboard and PS/2 mouse interface are provided via P13; where the PS/2 voltage is selectable with
J1. Refer to the specification printed on the bottom of the keyboard and mouse to determine which voltage
to select; in most cases this is 5V.
Connectors & Jumpers
Function PS/2 Keyboard and Mouse
P13
Locations
Type
Molex 0532610671 connector
Pinout
Pin
1
Signal
KDAT
Description
Keyboard Data
2
KCLK
Keyboard Clock
Filtered digital ground
3
PS2_GND
PS2_VCC
4
Filtered PS/2 supply voltage, via
J1
5
6
MDAT
MCLK
Mouse Data
Mouse Clock
Function PS/2 voltage select
Selects either +3.3Vauxiliary or +5V auxiliary.
J1
Location
Type
1x3 0.1” jumper
Pinout
Position
1-2
Description
+3.3V_A
+5V_A
2-3
off
floating
Default
+3.3V
Revision 0.02
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Power
Description
The Xtreme/SBC is designed to be powered from an ATX type power supply, and support many of the
ACPI features like suspend to RAM. A CR1225 battery holder (P16) provides the VBAT for the Qseven
module.
The Xtreme/SBC generates 3.3V on board, to facilitate alternate powering options.
WARNING: Do not attach a PCIe-104 power supply to P2 (the PCIe104 connector). These power
supplies typically generate 3.3V, which would conflict with the onboard 3.3V.
Other powering options include
A) +5V & +12V only: The ATX features can be bypassed by powering +5V_SB with same 5 volt supply
as the +5V input pins.
B) +5V only: similar to the above cause, but excluding the +12V which is used only by the backlight and
PCIe-104 connector. Before attempting this, verify that this configuration is appropriate for the target
installation.
Connectors & Jumpers
Function ATX input power
P6
Location
Type
JST B15B-EH-A
Pinout
Pin
Signal
Description
1
+5V
+5V input, powers onboard power
regulators & Qseven module
2
3
GND
+5V
Digital Ground
+5V input, powers onboard power
regulators & Qseven module
4
5
GND
+5V
Digital Ground
+5V input, powers onboard power
regulators & Qseven module
6
+5V_SB
+5V standby input, powers +3.3V
auxiliary power
7
8
GND
PSON#
PWROK
+3.3V
Digital Ground
Power Supply On
Power OK
9
10
+3.3V input, not used by
Xtreme/SBC. +3.3V is derived on
internally
11
12
GND
+12V
Digital Ground
+12V input, used by PCIe104 and
backlight
13
+12V
+12V input, used by PCIe104 and
backlight
14
15
GND
-12V
Digital Ground
-12V input, not used
20
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Function Suspend Selection
Selects either S3 or S5.
J7
Location
Type
1x3 2 mm
Pinout
Position
1-2
Description
Suspend S3
2-3
Suspend S5
Floating
off
Default
S3
Function Power Supply on
Selects either PS_ON# signal from Qseven module or
always on
J8
Location
Type
1x3 2mm
Pinout
Position
1-2
Description
Always on
2-3
Qseven PS_ON#
floating
off
Default
Qseven PS_ON#
Function Power Button
Selects either +3.3Vauxiliary or +5V auxiliary.
J9
Location
Type
1x2 2mm header
Pinout
Position
Description
PWR_BTN#
Ground
1
2
Revision 0.02
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Fan Control
Description
If actively cooling is required; P14 can be used to power and control a fan with J2 selecting the fan voltage.
Connectors & Jumpers
Function Fan power/control
P14
Location
Type
JST B15B-EH-A connector
Pinout
Pin
1
Signal
Description
Speed signal
FAN_SPEED
FAN_PWR
FAN_GND
2
Fan power selected by J2
Filtered digital ground
3
Function Fan power Selection
Selects either +5V or +12V.
J2
Location
Type
1x3 0.100” jumper
Pinout
Position
Description
+12V
1-2
2-3
off
+5V
Floating
Default
floating
Function Fan PWM polarity
Selects either positive or negative
J3
Location
Type
1x2 2mm jumper
Pinout
Default
22
Position
Description
Positive
off
on
Negative
floating
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Battery
Description
A CR1225 battery holder is provided at P16. This is a standard 3V battery, which powers the RTC (real
time clock) on the CPU module. In most cases, it is not required to preserve critical BIOS settings as most
Qseven modules have a flash based BIOS.
Connector & LEDs
Function Battery
P16
Location
Type
CR1225 battery holder
Hardware Installation
1. Ensure all external system power supplies are off.
2. Install the Qseven module into P1. Be sure to follow the manufacturer’s direction for proper
heatsink/heatspreader installation.
3. Verify all jumper settings from the relevant sections, paying special attention the power selection
jumpers
Selection
Position
Jumper
Function
J1
J2
J3
J4
PS/2 power
Fan Power
+5V
+12V
2-3
1-2
Off
2-3
Off
Fan PWM polarity
LVDS panel power
Positive
+3.3V
LVDS backlight
enable polarity
positive
J5
J6
LVDS Backlight
Power
+12V
1-2
J7
J8
Suspend Selection
S3
1-2
2-3
Power Supply On From Qseven module
4. Install the necessary cables for the application. At a minimum, this would include:
a) Power cable, either ATX or +5V/+12V only
b) Display cable, either VGA or LVDS
c) Keyboard, either PS/2 or USB
d) Power button, if applicable
5. Stack any necessary PCIe-104 modules on top of the Xtreme/SBC via P2, with the appropriate
mounting hardware
Revision 0.02
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
6. Connect the appropriate I/O peripherals to the interface cables: keyboard, mouse, Ethernet,
monitor, etc.
7. Connect the power cable to power supply
8. Turn on the supply.
Software Installation & Configuration
In general, always refer to the Qseven module’s manual for proper installation of drivers and configuration
software; as well as for appropriate BIOS settings.
The following sections provides some specific notes and hints for successful module integration
Operating System Notes
Linux
General
PS/2: Add kernel option i8042.nopnp to ensure keyboard and mouse PS/2 keyboard and mouse operation
Power down: Add kernel option acpi=force to ensure proper software shutdown.
US15W Specific
Graphics: Intel Driver support for the Poulsbo / GMA500) is limited to several distributions (Redhat,
Fedora). See IEGD (Intel Embedded Graphics Driver) website for details
Other distributions, such as Linux, are supported through the open source community.
Windows
General
Ethernet:
Install the appropriate Ethernet driver from the Qseven module vendor’s website.
US15W Specific
Graphics:
In some cases, the secondary LVDS display will appear washed out, to avoid this ensure the correct version
of the IEGD is installed.
24
Revision 0.02
Download from Www.Somanuals.com. All Manuals Search And Download.
Cables & Interconnect
The following table summarizes the Xtreme/SBC’s headers and lists the matching cables included with the optional cable kit CKG001.
Location
PCB Connector
Cable Part
Number
Drawing
Number
Description
USB (dual)
GBE
PCB End
Interface End
P3A, P3B
Hirose
DF13-8P-1.25H(50)
CBG071
CBG065
CBG070
CBG074
CBG075
CBG076
CBG078
CBG073
CBG079
CBG072
CBG080
CBG081
CTIC-00182
CTIC-00181
CTIC-00180
CTIC-00184
CTIC-00185
Hirose
DF13A-8S-1.25C
USB 2.0 Type A female
P4
P5
MLE
2x5 2mm socket RJ45 socket, GBE Ethernet
TSHSM-205-D-06-G-V-L
MLE
VGA
2x5 2mm socket
VGA HD15 Female
ATX 20 pin male
Molex disk drive power male
N/A
TSHSM-205-D-06-G-V-L
P6
JST
ATX power
5V / 12V only power
JST
EHR-15
B15B-EH-A(LF)(SN)
P6
JST
JST
EHR-15
B15B-EH-A(LF)(SN)
P7
Hirose
DF14-30P-1.25H(25)
CTIC-00196 LVDS un-terminated
CTIC-00198 Backlight un-terminated
Hirose
DF14-30S-1.25C
P8
Hirose
DF13-8P-1.25H(50)
Hirose
DF13A-8S-1.25C
N/A
P9, P11
P10A, P10B
P13
MLE
CTIC-00183
CTIC-00199
Serial (dual)
SATA
2x10 2mm socket
2 X DB-9 Male
SATA
TSHSM-210-D-06-G-V-L
Molex
0470804005
SATA
Molex
0532610671
CTIC-00186 Keyboard and Mouse
Molex
51021-0600
2 X 6 Mini-Din
Momentary Pushbutton
N/A
J9
Samtec
TMM-102-02-L-S
CTIC-00200
CTIC-00201
Power Button
Fan Power
1x2 2mm socket
P14
Hirose
Hirose
DF13-3P-1.25H(20)
DF13A-3S-1.25C
Cable drawings are available upon request
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Specifications
Form Factor
Display
PCIe/104, 4 x1 PCIe lanes
VGA, LVDS flat panel
2x SATA (7 pin connector)
2x RS-232, 2x RS-485
4x USB 2.0
Storage
Serial Interface
USB
Ethernet
1x Gigabit Ethernet
PC/104 compliant
Dimensions
Temperature
Power
[1]
-20ºC to 70ºC (-4ºF to 158ºF)
ATX supply input
Power Consumption
850 mA @ 5V
Qseven carrier circuitry only. Does not include module power.
PS/2 keyboard and mouse
Additional I/O
Warranty and Support
Lifetime warranty and free technical support
[1] Temperature range is limited by the SDVO to VGA conversion circuitry.
Revision 0.02
27
Download from Www.Somanuals.com. All Manuals Search And Download.
|
