Compaq TP Desktop Connector
for ACMS
Installation Guide
Order Number: AA–PG9DK–TE
May 2002
This document provides information about installing the Compaq TP
Desktop Connector software on desktop systems, and about installing the
Compaq TP Desktop Connector Gateway for ACMS software on systems
running the Compaq OpenVMS operating system and Compaq ACMS
software. It also describes activities associated with these installations,
such as the verification procedure.
Revision/Update Information:
Software Version:
This is a revised manual.
Compaq TP Desktop Connector
Version 3.2
Compaq Computer Corporation
Houston, Texas
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ix
Part I Using the Software Products Library CD
1 Before Installing TP Desktop Connector from the Software
Products Library CD
1.1
1.2
1.3
Overview of the Software Products Library Installation . . . . . . .
Software and Hardware Prerequisites . . . . . . . . . . . . . . . . . . . . .
Installation Procedure Requirements . . . . . . . . . . . . . . . . . . . . . .
1–1
1–2
1–3
2 Installing TP Desktop Connector from the Software Products
Library CD
2.1
Installing the TP Desktop Connector Gateway for ACMS
Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Client Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–1
2–2
2.2
3 After Installing from the Software Products Library CD
3.1
3.2
After Installing the Gateway Software . . . . . . . . . . . . . . . . . . . . .
After Installing TP Desktop Connector Client Software . . . . . . . .
Editing Startup Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
After Installing Non–VMS Clients . . . . . . . . . . . . . . . . . . . . .
Transferring Client Files to a Windows System . . . . . . . .
Transferring Client Files to a Tru64 UNIX System . . . . .
Installing the Client Services Interface on OpenVMS
3–1
3–1
3–2
3–2
3–3
3–4
3.2.1
3.2.2
3.2.2.1
3.2.2.2
3.2.3
Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Verifying the Motif Client Sample on OpenVMS . . . . . . . . . .
Setting Up the Avertz ACMS Sample Application on an
OpenVMS System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3–5
3–5
3.2.4
3.3
3–6
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.1
Using the Avertz ACMS Sample with Rdb Version 6.0 with
Multiversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Name Quotas for the Avertz ACMS Sample . . . . . . . . .
Access Control List for the Avertz ACMS Sample . . . . . . . . .
Rebuilding the Avertz ACMS Sample . . . . . . . . . . . . . . . . . . .
3–7
3–8
3–8
3–8
3.3.2
3.3.3
3.3.4
Part II Installing the TP Desktop Connector Client Software
4 TPware Product Suite CD-ROM Overview
4.1
TPware Product Suite CD-ROM Contents . . . . . . . . . . . . . . . . . .
4–1
5 Before Installing TP Desktop Connector Software
5.1
5.2
Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing to Install TP Desktop Connector Software . . . . . . . . . .
Product Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disk Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windows Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Non-Windows Platforms . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing the Installed Software . . . . . . . . . . . . . . . . . . . . . . . . .
5–1
5–1
5–2
5–2
5–2
5–2
5–3
5.2.1
5.2.2
5.2.2.1
5.2.2.2
5.3
6 Installing TP Desktop Connector Software on Windows
Operating Systems
6.1
6.2
6.2.1
6.2.2
6.2.3
Installation Procedure on Windows Operating Systems . . . . . . . .
After Installing TP Desktop Connector Software . . . . . . . . . . . . .
Setting Up the TPware Environment . . . . . . . . . . . . . . . . . . .
Accessing the ACMS System . . . . . . . . . . . . . . . . . . . . . . . . .
Defining the Network Transport for the Client Services
6–1
6–2
6–2
6–3
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Verifying the TP Desktop Connector Installation . . . . . . . . . .
Running the Windows Sample Client Application . . . . . . . . .
Code Conversion Libraries for Kanji . . . . . . . . . . . . . . . . . . .
6–3
6–3
6–3
6–4
6.2.4
6.2.5
6.2.6
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Installing the TP Desktop Connector Client Services on
Non-Windows Systems
7.1
Overview of the Client Services Installation . . . . . . . . . . . . . . . .
Software Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disk Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Client Services for OpenVMS . . . . . . . . . . . . . . . .
Setting Up the Client Services . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Motif Sample Client for OpenVMS . . . . . . . . .
Verifying the Motif Sample Installation on OpenVMS . . . . . .
Setting Up the Avertz ACMS Sample Application on an
OpenVMS System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Avertz ACMS Sample with Rdb Version 6.0
7–1
7–2
7–2
7–2
7–3
7–3
7–4
7–5
7.1.1
7.1.2
7.1.3
7.2
7.2.1
7.2.2
7.2.3
7.2.4
7–6
7.2.4.1
with Multi-Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Name Quotas for the Avertz ACMS Sample . . . . . .
Access Control List for the Avertz ACMS Sample . . . . . .
Rebuilding the Avertz ACMS Sample . . . . . . . . . . . . . . . .
Installing the Tru64 UNIX Client Software . . . . . . . . . . . . . . . . .
Installing the Motif Sample Client on Tru64 UNIX
7–7
7–7
7–7
7–8
7–9
7.2.4.2
7.2.4.3
7.2.4.4
7.3
7.3.1
Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Verifying the Motif Sample Installation on Tru64 UNIX
Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7–10
7–11
7.3.2
Part III Installing the Gateway Software
8 Preparing to Install TP Desktop Connector Gateway for
ACMS Software
8.1
8.2
8.3
8.3.1
8.3.2
8.3.3
8.3.4
8.3.5
8.3.6
Required Operating System Components . . . . . . . . . . . . . . . . . . .
Prerequisite Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Procedure Requirements . . . . . . . . . . . . . . . . . . . . . .
Disk Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Privileges and Authorization . . . . . . . . . . . . . . . . . . . . . . . . .
OpenVMS License Management Facility . . . . . . . . . . . . . . . .
System Disk Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stopping the ACMS System and Gateway . . . . . . . . . . . . . .
Locating the Saveset Directory . . . . . . . . . . . . . . . . . . . . . . .
8–1
8–1
8–1
8–2
8–2
8–3
8–4
8–4
8–4
v
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Installing TP Desktop Connector Gateway for ACMS Software
9.1
General Installation Information . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing the Online Release Notes . . . . . . . . . . . . . . . . . . . .
Files and Logical Names Installed on Your System . . . . . . . .
Installation Verification Procedure . . . . . . . . . . . . . . . . . . . . .
Aborting the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Invoking VMSINSTAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Informational Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Running the Installation Verification Procedure . . . . . . . . . .
Completing the Installation Procedure . . . . . . . . . . . . . . . . . .
Recovering from System and Installation Failures . . . . . . . . . . . .
System Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IVP Error Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9–1
9–1
9–2
9–2
9–3
9–3
9–3
9–4
9–7
9–8
9–8
9–8
9–8
9–9
9–10
9.1.1
9.1.2
9.1.3
9.1.4
9.2
9.2.1
9.2.2
9.2.3
9.2.4
9.2.5
9.3
9.3.1
9.3.2
9.3.3
10 After Installing TP Desktop Connector Gateway for ACMS
Software
10.1
Editing the OpenVMS System Files . . . . . . . . . . . . . . . . . . . . . . .
Editing the System Startup File . . . . . . . . . . . . . . . . . . . . . .
Editing the System Shutdown File . . . . . . . . . . . . . . . . . . . .
Performing Cluster Procedures . . . . . . . . . . . . . . . . . . . . . . . . . .
Matching Client and Server Versions . . . . . . . . . . . . . . . . . . . . . .
10–1
10–1
10–3
10–3
10–3
10.1.1
10.1.2
10.2
10.3
11 Running the TP Desktop Connector Gateway for ACMS IVP
11.1
11.2
11.2.1
11.2.2
11.2.3
IVP Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Running the IVP Independently . . . . . . . . . . . . . . . . . . . . . . . . .
IVP Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IVP Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IVP Error Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11–1
11–1
11–1
11–2
11–2
Part IV Appendixes
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
A Files Installed
B Common Configuration Errors
B.1
Errors Related to the Desktop System . . . . . . . . . . . . . . . . . . . . .
B–1
B–1
B–1
B–2
B.1.1
B.1.2
B.2
Errors on OpenVMS Desktops . . . . . . . . . . . . . . . . . . . . . . . .
Errors on Tru64 UNIX Desktops . . . . . . . . . . . . . . . . . . . . . .
Errors Related to the ACMS System . . . . . . . . . . . . . . . . . . . . . .
Index
Examples
2–1
Sample Client Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .
TP Desktop Connector Disk Space Requirements . . . . . . . . .
2–2
1–3
Tables
1–1
2–1
TP Desktop Connector Files on the Software Products
Library CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–1
3–2
3–9
4–1
3–1
3–2
4–1
5–1
Contents of ACMSDI$NONVMS_CLIENTS . . . . . . . . . . . . . .
VR_DA_BLD_MMS.COM Parameters . . . . . . . . . . . . . . . . . .
Contents of the TPware Product Suite CD . . . . . . . . . . . . . . .
TP Desktop Connector Client Services Disk Space
Requirements on Non-Windows Systems . . . . . . . . . . . . . . . .
5–2
7–8
8–2
7–1
8–1
A–1
VR_DA_BLD_MMS.COM Parameters . . . . . . . . . . . . . . . . . .
Disk Space Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . .
Files Installed for TP Desktop Connector Client Services for
OpenVMS Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A–1
A–2
Files Installed for the Motif Sample for OpenVMS
Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A–1
A–3
A–4
A–3
A–4
A–5
Files Installed for the Visual Basic Windows Sample . . . . . . .
Files Installed for the Forced NonBlocking Tutorial . . . . . . . .
Files Installed for the Client Services for Tru64 UNIX
Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A–4
A–4
A–6
Files Installed for the Motif Sample for Tru64 UNIX
Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
This guide presents information about installing the Compaq TP Desktop
Connector software on desktop platforms, and the TP Desktop Connector
Gateway for ACMS software on OpenVMS platforms.
Intended Audience
This document is intended for:
•
•
System managers responsible for Compaq ACMS transaction processing
installations.
Programmers developing client applications with Compaq TP Desktop
Connector software.
To perform the installation and deinstallation procedures described in this
guide, you must have administrator (for Windows platforms), SYSTEM (for
OpenVMS platforms), or superuser (for Tru64 UNIX platforms) privileges, and
you should be familiar with your operating system’s installation procedure.
Related Software
Compaq TP Desktop Connector is part of a transaction processing software
suite that also contains the following product variants:
•
•
Compaq TP Desktop Connector for ACMSxp
Compaq TP Web Connector
Complete information about the relationships of other software products
with TP Desktop Connector software is available in the Software Product
Description (SPD). The SPD also identifies which versions of your operating
system are compatible with TP Desktop Connector software.
Your product kit includes a copy of the SPD. You can also find it on the
Software Product Descriptions.
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Related Documents
Installation instructions for the ACMSxp version of TPware software appears
in the following manual:
•
Com pa q TP Desktop Con n ector for ACMSxp Installation Guide
The following manuals contain information about building client applications
with TP Desktop Connector products:
•
•
Com pa q TP Desktop Con n ector Getting Started
Com pa q TP Web Con n ector Getting Started
The following documents contain information on the TP Desktop Connector
Client Services Interface:
•
•
•
Com pa q TP Desktop Con n ector for ACMS Client Application
Programming Guide
Com pa q TP Desktop Con n ector for ACMS Client Services Reference
Manual
Com pa q TP Desktop Con n ector for ACMS Gateway Management Guide
Other manuals contain information about installing and managing your ACMS
system and TP Desktop Connector Gateway for ACMS software:
•
Com pa q ACMS for Open VMS Installation
Describes the installation of ACMS software on OpenVMS systems.
•
Com pa q ACMS for Open VMS Managing Applications
Explains how to start and stop the ACMS system, monitor system
performance, and perform some tuning operations. It also tells how to
install applications and how to authorize users, devices, and applications.
This guide does not provide details about the OpenVMS installation procedure.
For that information, refer to the Installation and Operations manual for
the particular device that you use. That manual describes the following
procedures:
•
•
Handling and mounting the distribution media
Readying the current system and target system devices
For information on recommended system management and operations policies
and procedures, refer to your site management guide and the volumes in
the OpenVMS documentation set that pertain to system management and
operations.
x
Download from Www.Somanuals.com. All Manuals Search And Download.
Finally, the Com pa q TP Desktop Con n ector Release Notes contain informa-
tion about new features and current restrictions for TP Desktop Connector
software. In your Web browser, open the dskcon_release_notes.htm file in
the intel32 directory on the TPware Product Suite CD. On the OpenVMS
Software Products Library CD, the Release Notes are contained in the
installation procedures. Compaq recommends that you read the Release Notes
before you install the software.
Structure
This manual contains multiple parts, as shown in the following table:
Component
Description
Part I: Using the Software Products Library CD
Chapter 1
Chapter 2
Chapter 3
Explains how to prepare your OpenVMS system for installing TP
Desktop Connector software from the Software Products Library CD.
Explains how to install TP Desktop Connector and gateway software
from the Software Products Library CD.
Describes tasks that might be needed on your OpenVMS system
after installing TP Desktop Connector software from the Software
Products Library CD. It also provides references to information on
post-installation tasks for TP Desktop Connector client software on
other platforms.
Part II: Installing the TP Desktop Connector Client Software
Chapter 4
Describes the TPware Product Suite CD medium on which TP
Desktop Connector software is distributed and which portions
apply to installing TP Desktop Connector software and related
components.
Chapter 5
Chapter 6
Chapter 7
Explains how to prepare your system for installing TP Desktop
Connector software from the TPware Product Suite CD.
Describes how to install the TP Desktop Connector software on a
Windows operating system.
Describes how to install the TP Desktop Connector Client Services
Interface software and sample client applications on the following
desktop platforms:
Compaq OpenVMS
Tru64 UNIX
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Component
Description
Part III: Installing the Gateway Software
Chapter 8
Chapter 9
Explains how to prepare your OpenVMS system for installing TP
Desktop Connector gateway for ACMS software.
Describes how to install the TP Desktop Connector gateway for
ACMS software and sample server-side applications and run the
Installation Verification Procedure (IVP). It also tells you how to
recover from system and installation failures.
Chapter 10
Chapter 11
Describes postinstallation procedures that prepare the OpenVMS
system for running gateway software.
Describes how to run the installation verification procedure (IVP)
separately from the installation procedure.
Part IV: Appendixes
Appendix A
Appendix B
Lists the files that are installed on your system for the various
sample programs.
Contains helpful hints about errors that might occur when you run
one of the sample applications.
The information in Part IV applies no matter from which CD-ROM you
installed the software.
Conventions
This manual uses the following conventions:
Convention
Description
TP Desktop Connector
Represents the Compaq TP Desktop Connector product
software.
Gateway
UPPERCASE
FTP
Represents the Compaq TP Desktop Connector Gateway for
ACMS software.
In text, the names of OpenVMS directories, commands,
logicals, and so on, are set in all capital letters.
Represents the file transfer program of your choice, not
necessarily File Transfer Protocol. You can substitute any
method that works on your installation and target platforms.
italics
In text, italics indicate emphasis, a product name, or the title
of a book.
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
Convention
Description
courier
This font indicates a command, programming language, or an
object on your screen.
user input
In examples, letters that you actually type are highlighted in
boldface type.
node
In syntax format and examples, italic type indicates variables,
parameters, or arguments. You need to substitute the
appropriate value.
E:\
In examples, the CD-ROM device is assumed to be drive E:.
Substitute the correct letter for your system, if needed.
C:\TPware\
This is the default destination for the TPware Product
Suite installation program. Most examples in this book
use the default. If you choose a different folder during the
installation, substitute that drive and folder name.
.
.
.
In examples, a vertical ellipsis indicates that information not
directly related to the example has been omitted.
Microsoft Windows
When used alone, Windows indicates any supported member
of the family of Microsoft Windows operating systems. Where
necessary, specific Windows operating systems are mentioned.
For a list of Microsoft Windows operating systems supported
by TPware products, see the product’s Software Product
Description (SPD).
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Part I
Using the Software Products Library CD
Part I describes how to install Compaq TP Desktop Connector and Compaq TP
Desktop Connector Gateway for ACMS software from the OpenVMS Software
Products Library compact disk. Part I presents the following major topics:
•
Before Installing TP Desktop Connector from the Software Products
Library CD
•
•
Installing TP Desktop Connector from the Software Products Library CD
After Installing from the Software Products Library CD
For client installations using the TPware Product Suite CD, see Part II. For
TP Desktop Connector Gateway for ACMS software installation using the
TPware Product Suite CD, see Part III.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Before Installing TP Desktop Connector
from the Software Products Library CD
This chapter discusses the preparations and requirements necessary for
installing Compaq TP Desktop Connector and Compaq TP Desktop Connector
Gateway for ACMS software on an OpenVMS system from the Software
Products Library CD and also provides a general overview of the installation
process.
If you have the TPware Product Suite CD, see Part II for client installation
information or Part III for TP Desktop Connector Gateway for ACMS software
installation information.
TP Desktop Connector software includes online Release Notes and gives you
the option of printing or displaying them during the installation procedure.
Compaq strongly recommends that you read the Release Notes before
proceeding with the installation, in case they contain important information
regarding the installation procedure.
1.1 Overview of the Software Products Library Installation
The Compaq TP Desktop Connector software is delivered in two distinct
product savesets, one for the gateway software that runs on the OpenVMS
platform and one for all types of desktop clients:
•
The gateway saveset (ACMSDIA031.*)
Delivers the software required on an OpenVMS system to enable access to
Compaq ACMS from the desktop systems. Also includes server-side sample
applications.
You install the gateway software with a regular VMSINSTAL command.
The client saveset (TPW032.A)
•
Delivers the software required for application development in a
multiplatform, networked, desktop systems environment. Also includes
sample client applications.
Before Installing TP Desktop Connector from the Software Products Library CD 1–1
Download from Www.Somanuals.com. All Manuals Search And Download.
You install the client software by starting with a VMSINSTAL command
on an OpenVMS system. This places on the OpenVMS system the client
software in the form of self-extracting archive files. The next steps depend
on your target desktop platform.
The use of the Software Products Library CD and VMSINSTAL is described in
Chapter 2.
The procedure for installing the client software and the accompanying sample
client application files consists of the following general steps (described in
Chapter 3):
1. Transfer from your OpenVMS system to your target desktop system a file
or files created when you run VMSINSTAL. You use a file transfer program
such as FTP.
If your target desktop is an OpenVMS system, all the files are in place in a
public systemwide directory (see Section 3.2).
2. On the target desktop system, expand the file that you transferred from
the OpenVMS system.
•
If your target desktop is a Windows system, expand the self-extracting
archive file as explained in Section 3.2.2.1.
•
If your target desktop is a Tru64 UNIX system, expand the self-
extracting archive file as explained in Section 3.2.2.2.
After you deploy the files on the target desktop system, the procedures
to continue the installation and perform setup operations are the same
as those for the TPware Product Suite CD medium. The documentation
provides pointers to the relevant procedures in Part II.
3. Run the sample application to verify that the installation functions
properly.
The following sections discuss the requirements necessary before installing the
Compaq TP Desktop Connector software.
1.2 Software and Hardware Prerequisites
The Compaq TP Desktop Connector Software Product Description (SPD),
included in the product kit, contains complete information on software
products, networks, and systems required for installing and using TP Desktop
Connector client and gateway software.
1–2 Before Installing TP Desktop Connector from the Software Products Library CD
Download from Www.Somanuals.com. All Manuals Search And Download.
In addition, installing TP Desktop Connector software requires a certain
amount of free storage space. Table 1–1 summarizes the storage requirements
for TP Desktop Connector during and after installation.
Table 1–1 TP Desktop Connector Disk Space Requirements
Blocks During Blocks After
Installation
Installation
TP Desktop Connector Gateway for ACMS software
OpenVMS client files
23,304
34,383
6,500
3,300
To determine the number of free disk blocks on the current system disk, enter
the following command at the DCL prompt:
$ SHOW DEVICE SYS$SYSDEVICE
In the output column under the heading Free Blocks is the number of 512-byte
blocks available on the device.
1.3 Installation Procedure Requirements
Both the gateway and client installations from the Software Products Library
CD use the VMSINSTAL command. Section 2.1 describes the gateway and
server-side instructions. Section 2.2 describes the client installation process.
Before Installing TP Desktop Connector from the Software Products Library CD 1–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Installing TP Desktop Connector from the
Software Products Library CD
This chapter explains how to install Compaq TP Desktop Connector and
Compaq TP Desktop Connector gateway for ACMS from the Software Products
Library CD. Table 2–1 shows the contents of the TP Desktop Connector
directory on the Software Products Library CD.
Table 2–1 TP Desktop Connector Files on the Software Products Library CD
Directory Name
Description
[KITS]
ACMSDIA031.*
TP Desktop Connector Gateway
for ACMS savesets
TPW032.*
TP Desktop Connector client
savesets
[DOCUMENTATION]
ACMSDI032_IGUIDE.PS
ACMSDI032_IGUIDE.TXT
This book, formatted for
PostScript or plain text
ACMSDI032_COVER.PS
ACMSDI032_COVER.TXT
Read Before Installing letter
ACMSDI032_SPD.PS
ACMSDI032_SPD.TXT
Software Product Description
document
2.1 Installing the TP Desktop Connector Gateway for ACMS
Software
Installing the gateway kit from the Software Products Library CD is the same
as from the TPware Product Suite CD, except for the location of the product
saveset.
To find the correct compact disk (CD) media and directory for the gateway
software, refer to the Open VMS Layered Products Compact Disc User ’s Guide.
Installing TP Desktop Connector from the Software Products Library CD 2–1
Download from Www.Somanuals.com. All Manuals Search And Download.
After you locate the product saveset, follow the instructions for VMSINSTAL in
Chapter 9.
2.2 Installing the Client Kit
To install the client kit on the OpenVMS system, while logged in under the
SYSTEM account at the DCL prompt, type a command in the following format:
$ @SYS$UPDATE:VMSINSTAL TPW032 device-name:[directory-name]
The value of device-name: is the specification of the drive on which the CD-
ROM is mounted and directory-name is the location of the product saveset on
the Software Products Library CD (refer to the Open VMS Layered Products
Compact Disc User ’s Guide for the directory name).
Example 2–1 shows the output from a sample installation.
Example 2–1 Sample Client Installation
OpenVMS VAX Software Product Installation Procedure V6.2
It is 8-MAY-2002 at 11:31.
Enter a question mark (?) at any time for help.
%VMSINSTAL-W-NOTSYSTEM, You are not logged in to the SYSTEM account.
%VMSINSTAL-W-ACTIVE, The following processes are still active:
NOTES$0145_11*
DECW$TE_0C4F
FAL_14260004
DECW$TE_0688
_FTA57:
_FTA58:
ACMS01EXC001000
ACMS01EXC004000
ACMS004SP001000
ACMS01EXC00A000
ACMS00ASP001000
ACMS00ASP002001
* Do you want to continue anyway [NO]? y
* Are you satisfied with the backup of your system disk [YES]?
The following products will be processed:
TPW V3.2
Beginning installation of TPW V3.2 at 11:31
%VMSINSTAL-I-RESTORE, Restoring product save set A ...
(continued on next page)
2–2 Installing TP Desktop Connector from the Software Products Library CD
Download from Www.Somanuals.com. All Manuals Search And Download.
Example 2–1 (Cont.) Sample Client Installation
Installation of TP Desktop Connector for ACMS V3.2 client software started.
**************************************************************************
*
*
*
*
Copyright (C) 1990, 1999, 2000, 2002 by
Compaq Computer Corporation, Houston, Texas
ALL RIGHTS RESERVED. UNPUBLISHED RIGHTS RESERVED UNDER THE
COPYRIGHT LAWS OF THE UNITED STATES.
*
*
*
*
**************************************************************************
%VMSINSTAL-I-SYSDIR, This product creates system disk directory SYS$COMMON:[ACMSDI.V
MS_CLIENTS].
%VMSINSTAL-I-RESTORE, Restoring product save set B ...
%VMSINSTAL-I-SYSDIR, This product creates system disk directory SYS$COMMON:[ACMSDI.N
ONVMS_CLIENTS].
%VMSINSTAL-I-RESTORE, Restoring product save set C ...
%VMSINSTAL-I-SYSDIR, This product creates system disk directory SYS$COMMON:[SYSHLP.E
XAMPLES.ACMSDI.AVERTZ.MOTIF].
%VMSINSTAL-I-RESTORE, Restoring product save set D ...
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Installation of TP Desktop Connector for ACMS V3.2 client software has ended.
Installation of TPW V3.2 completed at 11:33
VMSINSTAL procedure done at 11:33
See Chapter 3 to continue with postinstallation tasks.
Installing TP Desktop Connector from the Software Products Library CD 2–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
After Installing from the Software Products
Library CD
This chapter describes the procedures, on both the OpenVMS system where
the gateway kit was installed and on your target desktop system, that are
required for server-side and client-side applications to run and communicate.
3.1 After Installing the Gateway Software
Post-installation tasks for TP Desktop Connector Gateway for ACMS software
are the same whether you install from the Software Products Library CD or
the TPware Product Suite CD (see Chapter 10).
For TP Desktop Connector on the Software Products Library, the server-side
sample application is part of the client software, not the gateway software. The
client services files for OpenVMS are laid down when you use VMSINSTAL on
the TPW032 savesets. See Section 3.3 for information on the server-side Avertz
sample application.
3.2 After Installing TP Desktop Connector Client Software
After installing the client software from the Software Products Library CD,
all the files needed for the OpenVMS client and its sample applications are in
place. If you are developing an OpenVMS client application, you should edit a
startup file as shown in Section 3.2.1.
If you are developing a client application for a non-OpenVMS desktop platform,
you should follow the instructions in Sections 3.2.1 and 3.2.2.
After Installing from the Software Products Library CD 3–1
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2.1 Editing Startup Files
If TP Desktop Connector Gateway for ACMS is already installed on the same
system, edit the gateway startup file, SYS$STARTUP:ACMSDI$STARTUP.COM.
Remove the comment character ( ! ) from the following logical name definitions
for the client directories:
$! The next three logical name definitions pertain to TP Desktop Connector
$! client libraries and Motif samples and should be defined only after installing
$! clients on the same system where the Gateway is installed.
$!
$! define/system acmsdi$vms sys$common:[acmsdi.vms_clients]
$! define/system acmsdi$nonvms_clients sys$common:[acmsdi.nonvms_clients]
$! define/system acmsdi$examples_avertz_motif -
$!
sys$common:[syshlp.examples.acmsdi.avertz.motif]
If the gateway is on a different system, add the following logical name
definitions to your system startup file:
$ define/system acmsdi$vms sys$common:[acmsdi.vms_clients]
$ define/system acmsdi$nonvms_clients sys$common:[acmsdi.nonvms_clients]
$ define/system acmsdi$examples_avertz_motif -
sys$common:[syshlp.examples.acmsdi.avertz.motif]
3.2.2 After Installing Non–VMS Clients
In addition to OpenVMS client libraries, the client installation loads the self-
extracting archive files on your OpenVMS system (see Table 3–1). (The logical
name ACMSDI$NONVMS_CLIENTS is defined as described in Section 3.2.1.)
Table 3–1 Contents of ACMSDI$NONVMS_CLIENTS
DUNIX.EXE
TP Desktop Connector client services1 and samples for
Tru64 UNIX systems
INTEL32.EXE
Runtime and development software for the entire TPware
product suite on platforms running Windows systems.
1Formerly known as the ACMS Desktop ‘‘portable API’’ services.
After installing the TP Desktop Connector client software on an OpenVMS
system, transfer the appropriate archive file to your desktop system and
execute it (see Sections 3.2.2.1 through 3.2.2.2). After you expand the
appropriate archive, the resulting files can then be used.
3–2 After Installing from the Software Products Library CD
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2.2.1 Transferring Client Files to a Windows System
To place the client files on a Windows system, transfer the appropriate archive
file from the ACMSDI$NONVMS_CLIENTS directory on the OpenVMS system.
For example:
1. Use a network file transfer utility such as FTP to copy from the OpenVMS
system the INTEL32.EXE file (see Table 3–1). For example:
a. On the client system, create a subdirectory to store the software:
> mkdir c:\tpw032
b. Change directory to the newly created subdirectory:
> cd c:\tpw032
c. Connect to the OpenVMS system that contains the archive file:
> ftp nodename
.
.
.
login to host
.
.
.
FTP>
The value of nodename is the name of the OpenVMS system on which
the archive is installed. At the FTP prompts, supply the OpenVMS
user name and password. If you successfully log on to the OpenVMS
system, type commands at the FTP prompt to copy the archive file from
the OpenVMS directory to the client system and close the FTP utility.
For example:
FTP> binary
FTP> cd ACMSDI$NONVMS_CLIENTS:
FTP> get intel32.exe
FTP> quit
2. On the client system, expand the archive file and delete it to recover disk
space. For example:
> intel32
> del intel32.exe
To continue TP Desktop Connector software installation and setup, see
Section 6.1 on running the setup program and Section 6.2 on setting up an
environment for Windows systems.
After Installing from the Software Products Library CD 3–3
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2.2.2 Transferring Client Files to a Tru64 UNIX System
To place the client files on a Tru64 UNIX system, transfer the appropriate
archive file from the ACMSDI$NONVMS_CLIENTS directory on the OpenVMS
system. For example:
1. Use a network file transfer utility such as FTP to copy from the OpenVMS
system the dunix.exe file (see Table 3–1). For example:
a. On the client system, create a directory under your home directory:
> mkdir tpw032dir
b. Change to the new directory.
> cd tpw032dir
c. Connect to the OpenVMS system that contains the archive file.
> ftp nodename
.
.
.
login to host
.
.
.
ftp>
The value of nodename is the name of the OpenVMS system on which
the archive is installed. At the FTP prompts, supply the OpenVMS
user name and password. If you successfully log on, type commands at
the FTP prompt to copy the archive file and close the FTP utility. For
example:
ftp> binary
ftp> cd ACMSDI$NONVMS_CLIENTS:
ftp> get dunix.exe
ftp> quit
2. On the client system, expand the archive file and delete it to recover disk
space. For example:
> chmod 755 dunix.exe
> ./dunix.exe
> rm dunix.exe
The archive expands into two tar files. To continue installation and setup, see
Section 7.3.
3–4 After Installing from the Software Products Library CD
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2.3 Installing the Client Services Interface on OpenVMS Systems
The client services library is preconfigured for DECnet network access. To
build applications that use TCP/IP as a transport, you must reconfigure the
library before creating executable programs.
The following steps are necessary to set up the client services library for
TCP/IP access:
1. Copy the library and related files to your home directory with the following
command:
$ copy/log ACMSDI$VMS:*.* []
2. Remove the DECnet object from the library with the following command:
$ library/delete = net_decnet acmsdi$client_objlib.olb
Insert the TCP/IP transport access module into the library with the
following command:
$ library/insert acmsdi$client_objlib.olb net_tcpip.obj
After these steps, you are ready to build TP Desktop Connector applications
that use TCP/IP as a transport. Table A–1 shows the files that are added to
your desktop system during the installation of the TP Desktop Connector client
services for OpenVMS.
3.2.4 Verifying the Motif Client Sample on OpenVMS
Copy, compile, link, and run the source code for the sample client program to
verify your capability to build applications.
To build the sample application, follow these steps:
1. Copy the client sample files to your home directory using the following
command:
$
copy/log ACMSDI$EXAMPLES_AVERTZ_MOTIF:*.* []
Table A–2 lists the files that are added to your desktop system.
2. If you have MMS, use the MMS makefile provided to build the m_avertz
sample application. In the sample directory, run MMS using the following
command:
$ MMS/DESC=M_AVERTZ
After Installing from the Software Products Library CD 3–5
Download from Www.Somanuals.com. All Manuals Search And Download.
If you download TP Desktop Connector libraries to a different location, edit
the makefile to indicate the new location of the libraries.
Note
On OpenVMS Alpha systems, the makefile expects the logical
ACMSDI$VMS_ALPHA to point to the directory that contains the
TP Desktop Connector client library. In addition, on OpenVMS
Alpha systems, the first time that the makefile tries to create the
DECwindows library, the makefile fails. When this happens, rerun
MMS to continue the build.
If you do not have MMS, use the makefile as a guide to build the
application yourself.
3. Run the application by entering the following command:
> run m_avertz/nodebug
The m_avertz application displays the menu bar of the AVERTZ Car
Reservation System. If you want the sample desktop client program to
communicate with the ACMS application, follow the procedures in Section 7.2.4
to set up the sample application on the ACMS system. After you set up the
ACMS system, use the Session menu to sign in to the ACMS system. After you
sign in, you can use the Rental menu to run the reserve task of the AVERTZ
application.
The installation procedure is now complete and verified.
3.3 Setting Up the Avertz ACMS Sample Application on an
OpenVMS System
The command procedure VR_DA_RUNTIME_SETUP.COM sets up the sample
application. You need SYSPRV privilege to run the procedure. Refer to the
file ACMSDI$VR_APPLICATION_INFO.TXT in the ACMSDI$EXAMPLES_
AVERTZ directory for more information on setting up the sample.
To prepare the AVERTZ sample application on the Compaq OpenVMS system,
do the following:
1. Run the command procedure to set up the application:
3–6 After Installing from the Software Products Library CD
Download from Www.Somanuals.com. All Manuals Search And Download.
$ @ACMSDI$EXAMPLES_AVERTZ:VR_DA_RUNTIME_SETUP
.
.
.
$
2. Start the ACMS system (if necessary) and the application:
$ ACMS/START SYSTEM
$ ACMS/START APPLICATION VR_DA_APPL
3. Perform other management tasks related to your system, for example,
authorizing user accounts. Refer to the management information
in Com pa q TP Desktop Con n ector for ACMS Client Application
Programming Guide.
The following sections provide additional information about using the Avertz
sample application on the ACMS OpenVMS system.
3.3.1 Using the Avertz ACMS Sample with Rdb Version 6.0 with
Multiversion
When you execute the VR_DA_RUNTIME_SETUP.COM file to set up
the sample application, this command file invokes two option files, VR_
READ_SERVER.OPT and VR_UPDATE_SERVER.OPT, which refer to the
SYS$LIBRARY:SQL$USER library. On a system with Rdb Version 6.0 with
multiversion installed, the SYS$LIBRARY:SQL$USER file is not available.
Instead, the version number is appended to the file name, for instance,
SYS$LIBRARY:SQL$USER60.
To work around this naming mismatch problem, you can define the logical
name SQL$USER to reference the appropriate library file. For example:
$ DEFINE SQL$USER SYS$LIBRARY:SQL$USER60
Modify the linker options files:
ACMSDI$EXAMPLES_AVERTZ:VR_READ_SERVER.OPT
ACMSDI$EXAMPLES_AVERTZ:VR_UPDATE_SERVER.OPT
Replace the line
SYS$LIBRARY:SQL$USERnn.OLB/LIBRARY
with the following:
SYS$USER/LIBRARY
After Installing from the Software Products Library CD 3–7
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3.2 User Name Quotas for the Avertz ACMS Sample
The VR_DA_RUNTIME_SETUP.COM command file assigns quotas for the
AVERTZ_EXC, AVERTZ_UPD, and AVERTZ_READ user names that are
adequate for running the VR_DA_APPL sample application. If your system
already has these user names defined, the quotas for these user names
might be inadequate for VR_DA_APPL. If you are using the AVERTZ sample
application, delete the AVERTZ_EXC, AVERTZ_UPD, and AVERTZ_READ
user names before running VR_DA_RUNTIME_SETUP.COM to ensure that
you get appropriate quotas for these user names.
To ensure the success of the operations in the VR_DA_RUNTIME_SETUP.COM
command procedure, run it from the system account.
3.3.3 Access Control List for the Avertz ACMS Sample
The VR_DA_RUNTIME_SETUP.COM procedure adds the AVERTZ application
name VR_DA_APPL to the ACMS database. The command line to do so
includes the ACL qualifier and assigns the ID as /ID=SYSTEM. This might fail
on your system.
To ensure that the VR_DA_RUNTIME_SETUP.COM procedure works, change
the ID=SYSTEM to ID=[UIC], where UIC is that of the account SYSTEM; for
example, ID=[1,4].
3.3.4 Rebuilding the Avertz ACMS Sample
Executables are provided for the sample. You do not need to rebuild the sample
to run it. However, a DEC/MMS description file is provided for rebuilding the
sample to incorporate any changes you make to the sample.
To modify and rebuild the sample, follow these steps:
1. Copy the sample sources to another directory.
2. Use the command procedure VR_DA_BLD_MMS.COM to rebuild the
sample under a different ADB name in that directory:
a. Create the CDD directories for the AVERTZ components.
b. Define logical names.
If you are using a directory other than ACMSDI$EXAMPLES_AVERTZ
for rebuilding the sample, edit the logical name definitions in the VR_
DA_BLD_LOGICALS.COM command procedure to point to your file
and CDD directories. Make these edits before running the BLD portion
of the VR_DA_BLD_MMS.COM command procedure.
c. Perform other setup and build activities.
3–8 After Installing from the Software Products Library CD
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Run the command procedure VR_DA_BLD_MMS.COM without parameters:
$ @ACMSDI$EXAMPLES:VR_DA_BLD_MMS
All the setup and build activities are performed.
To perform a specific activity, specify one of the parameters in Table 7–1.
Table 3–2 VR_DA_BLD_MMS.COM Parameters
Keyword
Activity
BLD
CDD
DB
Run MMS to build VR_DA_APPL
Set up the CDD dictionary and directories for VR_DA_APPL
Create the VEHICLE_RENTALS database
After Installing from the Software Products Library CD 3–9
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Part II
Installing the TP Desktop Connector Client
Software
Part II describes Compaq TP Desktop Connector software installation from the
TPware Product Suite CD on a client system and presents the following major
topics:
•
•
•
•
TPware Product Suite CD-ROM Overview
Before Installing TP Desktop Connector Software
Installing TP Desktop Connector Software on Windows Operating Systems
Installing the TP Desktop Connector Client Services on Non-Windows
Systems
Part II covers only the client-side software and samples, but not the server-side
software and samples. See Part III for the server-side instructions.
If you install the software from the Software Products Library CD, see Part I.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
TPware Product Suite CD-ROM Overview
This chapter describes the TPware Product Suite CD distribution medium from
which you install TP Desktop Connector software and related components.
4.1 TPware Product Suite CD-ROM Contents
The TPware Product Suite CD contains all the software required for
development and deployment of TP Desktop Connector client applications.
The gateway software needed to connect to an ACMS system (see Part III) is
included on a separate CD in the distribution kit. Table 4–1 lists the contents
of the TPware Product Suite CD.
Table 4–1 Contents of the TPware Product Suite CD
Name
Contents
\
\
\
dunix
TP Desktop Connector client services1 and samples
for Tru64 UNIX systems
install_guides
intel16
HTML and PDF editions of the TPware Product
Suite installation guides
TP Desktop Connector client services1 and samples
for 16-bit Microsoft operating systems (Sources can
be built on 32-bit Windows platforms)
\
intel32
Runtime and development kit for the entire TPware
product suite on platforms running 32-bit Microsoft
Windows operating systems
\
\
vmsalpha
vmsvax
TP Desktop Connector client services1 and samples
for OpenVMS Alpha systems
TP Desktop Connector client services1 and samples
for for OpenVMS VAX systems
1Formerly known as the ACMS Desktop ‘‘portable API’’ services.
(continued on next page)
TPware Product Suite CD-ROM Overview 4–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 4–1 (Cont.) Contents of the TPware Product Suite CD
Name
Contents
dskcon_release_notes.htm
dskcon_release_notes.pdf
Compaq TP Web Connector Release Notes (HTML
and PDF editions)
tpware_readme.txt
Text file to read before proceeding with product
installation
webcon_release_notes.htm
webcon_release_notes.pdf
Compaq TP Web Connector Release Notes (HTML
and PDF editions)
The TPware Product Suite CD is in ISO9660 standard format and contains
executable programs that install the appropriate files for each TPware product
that you purchase. Chapter 5 describes the preparations for and requirements
for installing the client software.
Chapters 6 through 7 contain complete descriptions of the installation
procedures for TP Desktop Connector client software, according to the platform
on which your client program runs. Part III contains the description of the
installation procedure for the TP Desktop Connector Gateway for ACMS
software.
4–2 TPware Product Suite CD-ROM Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Before Installing TP Desktop Connector
Software
This chapter describes the preparations and requirements necessary
for installing Compaq TP Desktop Connector software and also contains
information on removing TP Desktop Connector software from Windows
platforms. Your bill of materials (BOM) specifies the number and contents
of your distribution media. Be sure to verify the contents of your kit with
this information. If your kit is damaged or incomplete, contact your Compaq
representative.
5.1 Installation Overview
The TPware Product Suite CD contains all the software required for
development or deployment of TP Desktop Connector client applications.
The gateway software needed to connect to an ACMS system is included
on a separate CD included in the distribution kit. The gateway software
installation is described in Part III. Chapter 4 describes the contents of the
TPware Product Suite CD.
For a list of the client platforms supported by the TP Desktop Connector
product, see the TP Desktop Connector Software Product Description.
If you are developing TP Desktop Connector client applications for a non-
Windows system, you must install the client services files yourself (proceed to
Chapter 7.
5.2 Preparing to Install TP Desktop Connector Software
Ensure that your system meets the software requirements. Minimum software
requirements needed to install the TP Desktop Connector software and build
client applications that run with ACMS systems are shown in the Software
Product Description (SPD), a copy of which is included in the product kit.
You must have a Windows operating system with a CD drive on which to run
the installation procedures that are described in Chapter 6.
Before Installing TP Desktop Connector Software 5–1
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2.1 Product Licenses
To install TP Desktop Connector products, you must have a Product License
Key. This is a paper certificate that contains information about the license you
have to run a particular piece of software. You are asked to enter the license
key during the installation procedure.
5.2.2 Disk Space
Installing TP Desktop Connector software requires a certain amount of free
storage space, which depends on the platform you use.
5.2.2.1 Windows Platforms
Installation on Windows platforms requires 6,063 Kilobytes (KB) of free storage
space.
Note
This is the minimum disk space requirement. This estimate, though
conservative, is not always an accurate indicator of the disk space
used on a particular machine. System disk configuration, including the
size of the disk sector and the number of sectors per cluster, cannot
be determined by the installation program. Therefore, some systems
require more space.
5.2.2.2 Non-Windows Platforms
Table 5–1 shows the disk space required for TP Desktop Connector client
services software on each of the non-Windows systems.
Table 5–1 TP Desktop Connector Client Services Disk Space Requirements
on Non-Windows Systems
OpenVMS VAX Client
Number of Blocks
Client services library and network software
Common headers
322
31
Motif sample files
305
(continued on next page)
5–2 Before Installing TP Desktop Connector Software
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 5–1 (Cont.) TP Desktop Connector Client Services Disk Space
Requirements on Non-Windows Systems
OpenVMS Alpha Client
Number of Blocks
Client services library and network software
Common headers
709
31
Motif sample files
489
Tru64 UNIX Client
Number of Bytes
Client services library and TCP/IP module
Motif sample files
261,748
291,826
30,206
Common headers
5.3 Removing the Installed Software
You might decide to remove the installed TPware software to upgrade to a new
TPware software version, or for other reasons. Note that when you remove
the software, you lose the settings defined in the TPware Management Utility.
Before removing the software, refer to the Release Notes for instructions on
saving your management settings.
You can remove the installed TP Desktop Connector software from your system
using either the shortcut provided in the TPware products program group, or
the system Add/Remove Programs utility.
Note
The uninstall procedure removes all currently installed TPware
products.
•
To remove the software using the shortcut provided in the TPware program
group:
1. Click the Start button.
2. Choose the Programs menu.
3. Choose the TPware Products program group.
If you chose a different program group while installing Compaq TP
Desktop Connector, that group name is displayed on the Programs
menu in place of TPware Products
.
Before Installing TP Desktop Connector Software 5–3
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Choose the Uninstall TPware item.
•
To remove the software using the system Add/Remove Programs utility:
1. Double click the Add/Remove Programs icon in the Control Panel
window.
2. Choose the Compaq TPware item.
3. Click the Add/Remove... button.
5–4 Before Installing TP Desktop Connector Software
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Installing TP Desktop Connector Software
on Windows Operating Systems
This chapter describes the procedures for installing or reinstalling the Compaq
TP Desktop Connector software from the TPware Product Suite CD running on
a Windows system and also contains information on postinstallation tasks on
Windows systems.
For information on installing TP Desktop Connector software on non-Windows
platforms, see Chapter 7.
For information on installing TP Desktop Connector Gateway for ACMS
software, see Part III of this guide (Chapters 8 through 11).
6.1 Installation Procedure on Windows Operating Systems
To install TP Desktop Connector software, run the setup program. If you
install from the TPware Product Suite CD, the program is provided on the
CD-ROM (see Chapter 4). Double-click the following:
E:\intel32\setup.exe
Replace E: with the correct drive letter for your system.
If you install from the Software Products Library CD, run the setup program
from the directory in which you expanded the archive file that you copied from
the OpenVMS system (see Section 3.2.2.1).
The setup program displays a splash screen and a progress indicator while it
initializes its wizard. When setup starts, you see a series of dialog boxes. The
following table lists the operations associated with the command buttons in the
dialog boxes.
Installing TP Desktop Connector Software on Windows Operating Systems 6–1
Download from Www.Somanuals.com. All Manuals Search And Download.
To do this...
Click this button:
Complete the choices in a dialog box and continue Next
Return to a previous dialog box
Back
Exit without completing the installation
Cancel
Follow the instructions in the dialog boxes to select installation of Compaq TP
Desktop Connector.
The setup program checks whether there is sufficient disk storage, copies
appropriate files, and performs registry operations.
If setup finds that a requisite software product is not installed or that the
minimum version of a requisite product is not on the system, it displays a
Warning box showing the product name and version. The installation might
continue after the warning or it might fail, depending on the prerequisite. If
the installation continues, you must install the prerequisite software before
you can actually use TP Desktop Connector software.
After you successfully install TP Desktop Connector software, follow the
instructions in Section 6.2 to set up the TPware environment.
6.2 After Installing TP Desktop Connector Software
This section describes some procedures you might want to perform after you
copy files from the OpenVMS system (see Section 3.2.2.1) or after the setup
program finishes (see Section 6.1).
6.2.1 Setting Up the TPware Environment
Before developing TPware client applications, you must set up the environment
variables that TPware software requires. To do this, run the command file
installed by the setup program:
C:\TPware\stdl\bin\stdl_set_version.bat
Note
All examples show the default location. If you chose a different
destination while running setup, substitute your own drive and folder
for C:\TPware
.
6–2 Installing TP Desktop Connector Software on Windows Operating Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.2 Accessing the ACMS System
For access to a Compaq ACMS transaction processing system, the TP Desktop
Connector Gateway for ACMS must be installed on the OpenVMS system. The
gateway software is distributed on a separate CD included in the distribution
kit; instructions for installing it are in Part III.
6.2.3 Defining the Network Transport for the Client Services Interface
TP Desktop Connector software supports the TCP/IP network transport for
Windows clients. The product files include the client application’s TCP/IP
dynamic link library (DLL). This files is installed, by default, in:
C:\TPware\stdl_rt\bin\acmsdiWS.dll
To set up the TP Desktop Connector software for the TCP/IP transport, copy
the TCP/IP DLL from the installation folder to your working directory, and
rename it acmsdi.dll. The acmsdiWS.dll provides TCP/IP support through
the Windows WINsock facility.
6.2.4 Verifying the TP Desktop Connector Installation
To verify that your TP Desktop Connector software is installed correctly, you
can run one of the sample applications provided.
If you are developing an application that uses the Adapter Interface (refer
to Com pa q TP Desktop Con n ector Getting Started), both the sample
applications and the instructions for running them are online. To read the
instructions, choose the ACMS Samples item from the TP Desktop Connector for
ACMS menu in the TPware Products program group.
If you are developing a TP Desktop Connector client application that uses
the Client Services Interface on a Windows system, the client services files
are installed on your desktop by the setup program with the rest of the
development tools. The instructions for setting up the client services and
running the sample programs are in Sections 6.2.5 and 6.2.6.
6.2.5 Running the Windows Sample Client Application
Compaq TP Desktop Connector client services includes the same Visual Basic
AVERTZ sample that was provided for ACMS Desktop V2.0; it is a blocking,
no exchange I/O client. Table A–3 describes the contents of the Visual Basic
sample folder TPware\STDL\Samples\acmsdi\VB
.
The following files provide memory copy procedures and can be used to
help with interfacing Visual Basic Windows programs with the TP Desktop
Connector client services:
C:\TPware\STDL\lib\divb.lib
Installing TP Desktop Connector Software on Windows Operating Systems 6–3
Download from Www.Somanuals.com. All Manuals Search And Download.
C:\TPware\STDL_RT\bin\divb.dll
C:\TPware\STDL_RT\bin\msvcrt40.dll
To verify the success of your TP Desktop Connector client services installation,
you can run the Visual Basic sample application. Follow these steps:
1. Open the VBAVERTZ project.
2. Verify that all the required files were loaded (see the VBAVERTZ project
window):
vbavertz.bas
mainmenu.frm
reserve.frm
signin.frm
Double click each item in the project window to verify that it loads properly.
3. Run the interpreted version of VBAVERTZ (choose the Start command
from the Run menu).
6.2.6 Code Conversion Libraries for Kanji
TP Desktop Connector client services provides code conversion libraries for
Kanji users, which convert Shift J IS code to DEC Kanji code and DEC Kanji
code to Shift J IS code. You can link these libraries with your client application,
if it requires Kanji code conversion.
The following files are installed for Kanji applications:
C:\TPware\stdl\lib\jcnvwin.lib
C:\TPware\stdl\include\jcnvwin.h
C:\TPware\help\jcnvwin_guide.ps
C:\TPware\help\jcnvwin_guide.txt
For usage information, refer to either the PostScript or the text version of the
J apanese conversion guide.
6–4 Installing TP Desktop Connector Software on Windows Operating Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Installing the TP Desktop Connector Client
Services on Non-Windows Systems
The TP Desktop Connector client services software was previously released
as the ACMS Desktop ‘‘portable API’’ services. It allows client applications
running on a variety of desktop platforms to call ACMS tasks. For the current
TP Desktop Connector release, the client services software is distributed on
the TPware Product Suite CD in folders (directories) according to the desktop
platform (see Chapter 4).
Section 7.1 presents a general overview of the installation process and its
prerequisites.
For information on how to design and develop client applications using the TP
Desktop Connector client services software, refer to the following ACMS books:
•
Com pa q TP Desktop Con n ector for ACMS Client Application
Programming Guide
•
Com pa q TP Desktop Con n ector for ACMS Client Services Reference
Manual
7.1 Overview of the Client Services Installation
The TPware Product Suite CD is in ISO 9660 standard format. The
instructions in this chapter assume that you can not mount this CD directly on
your desktop system. Because you can not, you will have to use ftp or some
other network file transport to get the files from a Windows system that has
the TPware Product Suite CD mounted.
If you install from the Software Products Library CD, the instructions assume
that you copy the needed files from the OpenVMS system and expanded them.
The procedure for installing the client services and accompanying sample client
application files consists of the following general steps:
1. Transfer a client services archive to your desktop platform
Installing the TP Desktop Connector Client Services on Non-Windows Systems 7–1
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Execute it
3. Set up your system for the TPware environment
4. Set up the client services for your network transport
5. Transfer and execute a sample client archive
6. Run the sample to verify that the installation functions properly.
Sections 7.1.1 through 7.1.3 discuss the prerequisites and requirements
necessary before installing the TP Desktop Connector client services and
sample files. Installation instructions are organized by platform:
For this platform
See . . .
Compaq OpenVMS systems
Tru64 UNIX systems
Section 7.2
Section 7.3
7.1.1 Software Prerequisites
The TP Desktop Connector Software Product Description (SPD) contains
information on software prerequisites for installing TP Desktop Connector
software.
7.1.2 Disk Space
Table 5–1 lists the disk space required for each of the desktop systems.
7.1.3 Resources
Before you start the installation procedure, obtain the following:
•
•
•
•
DECnet node name (host name on TCP/IP) for the OpenVMS system on
which the TP Desktop Connector Gateway for ACMS is installed
Valid account (user name and password) on the OpenVMS system on which
the TP Desktop Connector Gateway for ACMS is installed
Directory of the network file transfer software in your directory search
path or on your CD-ROM
Directory in which the TPware files reside on an OpenVMS system, or your
CD-ROM device (usually E:\
)
•
•
•
Directory in which to install the client services software
Sufficient disk space, as shown in Table 5–1
Host name for TCP/IP
7–2 Installing the TP Desktop Connector Client Services on Non-Windows Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 Installing the Client Services for OpenVMS
The client services files for OpenVMS are provided as a compressed saveset
that you can copy from the TPware Product Suite CD mounted on your desktop
platform. After you copy the client services software to the client system,
decompress the file and restore the saveset.
7.2.1 Setting Up the Client Services
Follow these instructions to install the client services for OpenVMS systems:
1. Create the client services directory on the desktop system.
Note
This directory must be created from a user account, not from the
system account.
$ create/dir [.acmsdi]
2. Copy the file to the newly created directory.
For OpenVMS VAX systems:
$ set def [.acmsdi]
$ copy cd:[vmsvax]vms_client.exe []
$ run vms_client.exe
.
.
.
Return
accept the default output filename
.
.
.
$ backup vms_client.sav/save *.*/log
For OpenVMS Alpha systems:
$ set def [.acmsdi]
$ copy cd:[vmsalpha]vms_client.exe []
$ run vms_client.exe
.
.
.
Return
accept the default output filename
.
.
.
$ backup vms_client.sav/save *.*/log
Installing the TP Desktop Connector Client Services on Non-Windows Systems 7–3
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The TP Desktop Connector library is preconfigured for DECnet network
access. To build applications that use TCP/IP as a transport, you must
reconfigure the library before creating executable programs.
The following steps are necessary to set up the TP Desktop Connector
library for TCP/IP access:
a. Remove the DECnet object from the library with the following
command:
$ library/delete = net_decnet acmsdi$client_objlib.olb
Insert the TCP/IP transport access module into the library with the
following command:
$ library/insert acmsdi$client_objlib.olb net_tcpip.obj
After these steps, you are ready to build TP Desktop Connector applications
that use TCP/IP as a transport. Table A–1 shows the files that are added to
your desktop system during the installation of the TP Desktop Connector client
services for OpenVMS.
Follow the applicable steps in Sections 7.2.2 and 7.2.4.
7.2.2 Installing the Motif Sample Client for OpenVMS
To install the Motif sample files on the OpenVMS desktop system, perform the
following steps:
1. Create a directory on the desktop system to contain the sample files and
move to that directory:
$ create/dir [.motif_avertz]
$ set def [.motif_avertz]
2. Copy the Motif sample file.
For OpenVMS VAX systems:
$ copy cd:[vmsvax.samples]vms_avertz.exe []
For OpenVMS Alpha systems:
$ copy cd:[vmsalpha.samples]vms_avertz.exe []
3. Decompress the executable and restore the saveset:
7–4 Installing the TP Desktop Connector Client Services on Non-Windows Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
$ run vms_avertz.exe
.
.
.
Return
accept the default output filename
.
.
.
$ backup/restore vms_avertz.sav/save *.*/log
4. Copy the Motif resource file to your home directory:
$ copy m_avertz.dat sys$login:m_avertz.dat
Table A–2 lists the files that are added to your desktop system.
7.2.3 Verifying the Motif Sample Installation on OpenVMS
Compile, link, and run the source code for the sample client program to verify
your capability to build applications.
To build the sample application, follow these steps:
1. If you have MMS, use the MMS makefile provided to build the m_avertz
sample application. In the sample directory, run MMS using the following
command:
$ MMS
If you download TP Desktop Connector libraries to a different location, edit
the makefile to indicate the new location of the libraries.
Note
On OpenVMS Alpha systems, the makefile expects the logical
ACMSDI$VMS_ALPHA to point to the directory that contains the
TP Desktop Connector client library. In addition, on OpenVMS
Alpha systems, the first time that the makefile tries to create the
DECwindows library, the makefile fails. When this happens, rerun
MMS to continue the build.
If you do not have MMS, use the makefile as a guide to build the
application yourself.
2. Run the application by entering the following command:
> run m_avertz/nodebug
Installing the TP Desktop Connector Client Services on Non-Windows Systems 7–5
Download from Www.Somanuals.com. All Manuals Search And Download.
The m_avertz application displays the menu bar of the AVERTZ Car
Reservation System. If you want the sample desktop client program to
communicate with the ACMS application, follow the procedures in Section 7.2.4
to set up the sample application on the ACMS system. After you set up the
ACMS system, use the Session menu to sign in to the ACMS system. After you
sign in, you can use the Rental menu to run the reserve task of the AVERTZ
application.
The installation procedure is now complete and verified.
7.2.4 Setting Up the Avertz ACMS Sample Application on an OpenVMS
System
The command procedure VR_DA_RUNTIME_SETUP.COM sets up the sample
application. You need SYSPRV privilege to run the procedure. See the file
ACMSDI$VR_APPLICATION_INFO.TXT in the ACMSDI$EXAMPLES_
AVERTZ directory for more information on setting up the sample.
To prepare the AVERTZ sample application on a Compaq OpenVMS system, do
the following:
1. Run the command procedure to set up the application:
$ @ACMSDI$EXAMPLES_AVERTZ:VR_DA_RUNTIME_SETUP
.
.
.
$
2. Start the ACMS system (if necessary) and the application:
$ ACMS/START SYSTEM
$ ACMS/START APPLICATION VR_DA_APPL
3. Perform other management tasks related to your system, for example,
authorizing user accounts. Refer to the management information
in Com pa q TP Desktop Con n ector for ACMS Client Application
Programming Guide.
The following sections provide additional information about using the Avertz
sample application on the ACMS OpenVMS system.
7–6 Installing the TP Desktop Connector Client Services on Non-Windows Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2.4.1 Using the Avertz ACMS Sample with Rdb Version 6.0 with Multi-Version
When you execute the VR_DA_RUNTIME_SETUP.COM file to set up
the sample application, this command file invokes two option files, VR_
READ_SERVER.OPT and VR_UPDATE_SERVER.OPT, which reference the
SYS$LIBRARY:SQL$USER library. On a system with Rdb Version 6.0 with
multi-version installed, the SYS$LIBRARY:SQL$USER file is not available.
Instead, the version number is appended to the file name, for instance,
SYS$LIBRARY:SQL$USER60.
To work around this naming mismatch problem, you can define the logical
name SQL$USER to reference the appropriate library file. For example:
$ DEFINE SQL$USER SYS$LIBRARY:SQL$USER60
Modify the linker options files:
ACMSDI$EXAMPLES_AVERTZ:VR_READ_SERVER.OPT
ACMSDI$EXAMPLES_AVERTZ:VR_UPDATE_SERVER.OPT
Replace the line
SYS$LIBRARY:SQL$USERnn.OLB/LIBRARY
with the following:
SYS$USER/LIBRARY
7.2.4.2 User Name Quotas for the Avertz ACMS Sample
The VR_DA_RUNTIME_SETUP.COM command file assigns quotas for the
AVERTZ_EXC, AVERTZ_UPD, and AVERTZ_READ user names that are
adequate for running the VR_DA_APPL sample application. If your system
already has these user names defined, the quotas for these user names
might be inadequate for VR_DA_APPL. If you are using the AVERTZ sample
application, delete AVERTZ_EXC, AVERTZ_UPD, and AVERTZ_READ user
names before running VR_DA_RUNTIME_SETUP.COM to ensure that you get
appropriate quotas for these user names.
To ensure the success of the operations in the VR_DA_RUNTIME_SETUP.COM
command procedure, run it from the system account.
7.2.4.3 Access Control List for the Avertz ACMS Sample
The VR_DA_RUNTIME_SETUP.COM procedure adds the AVERTZ application
name VR_DA_APPL to the ACMS database. The command line to do so
includes the ACL qualifier and assigns the ID as /ID=SYSTEM. This might fail
on your system.
Installing the TP Desktop Connector Client Services on Non-Windows Systems 7–7
Download from Www.Somanuals.com. All Manuals Search And Download.
To ensure that the VR_DA_RUNTIME_SETUP.COM procedure works, change
the ID=SYSTEM to ID=[UIC], where UIC is that of the account SYSTEM; for
example, ID=[1,4].
7.2.4.4 Rebuilding the Avertz ACMS Sample
Executables are provided for the sample. You do not need to rebuild the sample
to run it. However, a DEC/MMS description file is provided for rebuilding the
sample to incorporate any changes you make to the sample.
To modify and rebuild the sample, follow these steps:
1. Copy the sample sources to another directory.
2. Use the command procedure VR_DA_BLD_MMS.COM to rebuild the
sample under a different ADB name in that directory:
a. Create the CDD directories for the AVERTZ components.
b. Define logical names.
If you are using a directory other than ACMSDI$EXAMPLES_AVERTZ
for rebuilding the sample, edit the logical name definitions in the VR_
DA_BLD_LOGICALS.COM command procedure to point to your file
and CDD directories. Make these edits before running the BLD portion
of the VR_DA_BLD_MMS.COM command procedure.
c. Perform other setup and build activities.
3. Run the command procedure VR_DA_BLD_MMS.COM without parameters:
$ @ACMSDI$EXAMPLES:VR_DA_BLD_MMS
All the setup and build activities are performed.
To perform a specific activity, specify one of the parameters in Table 7–1.
Table 7–1 VR_DA_BLD_MMS.COM Parameters
Keyword
Activity
BLD
CDD
DB
Run MMS to build VR_DA_APPL
Set up the CDD dictionary and directories for VR_DA_APPL
Create the VEHICLE_RENTALS database
7–8 Installing the TP Desktop Connector Client Services on Non-Windows Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 Installing the Tru64 UNIX Client Software
The TP Desktop Connector client services and sample application files are
distributed on the Software Products Library CD and on the TPware Product
Suite CD. If you are installing the software from the TPware Product Suite
CD (see Section 5.1), you have two tar files that you transfer to a Tru64 UNIX
desktop system. Perform the following steps.
1. Create the client services directory on the desktop system, and change to
that directory. For example:
> mkdir acmsdi
> cd acmsdi
2. Copy the du_client.tar file from the TPware Product Suite CD to the
client services directory. For example:
> cp cd/dunix/du_client.tar .
If you install the client files from the Software Products Library CD, change
directory to the location in which you expanded the archive file that you copied
from the OpenVMS system (see Section 3.2.2.2).
The du_client.tar file contains the client files. Perform the following steps.
1. Extract the files from the archive. For example:
acmsdi> tar xvf du_client.tar
.
.
.
The list of files printed because of the
in Table A–5.
v
flag should match the list of files
2. If you want to use the DECnet transport, change the client library. For
example:
> su
# ar d libacmsdi.a net_tcpip.o
# ar r libacmsdi.a net_decnet.o
# ar t libacmsdi.a
.
.
.
# ar qs libacmsdi.a
Also edit the Makefile to add -ldnet to the link library list.
Installing the TP Desktop Connector Client Services on Non-Windows Systems 7–9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. You can copy the client services library to /usr/lib/libacmsdi.a, so
that you can refer to it in your link command as ’-lacmsdi’. You need
superuser privileges to copy into the /usr/lib directory.
Copy the TP Desktop Connector client library to the system directory:
# cp libacmsdi.a /usr/lib/libacmsdi.a
.
.
.
You can leave the TP Desktop Connector library in the client services
directory. If you do, use the full path to the library in your link command,
instead of using the ’-lacmsdi’ option.
4. Update the copied library file:
# ar qs /usr/lib/libacmsdi.a
5. Exit superuser mode:
Ctrl/D
#
>
See Section 7.3.1 for instructions on installing sample files.
7.3.1 Installing the Motif Sample Client on Tru64 UNIX Platforms
To install the Motif sample files on the Tru64 UNIX system, perform the
following steps:
1. Create a directory on the desktop to contain the sample files and change to
that directory:
> mkdir avertz
> cd avertz
2. Copy the sample tar file from the TPware Product Suite CD:
> cp cd/dunix/samples/du_avertz.tar .
If you install the client files from the Software Products Library CD, change
directory to the location in which you expanded the archive file that you copied
from the OpenVMS system (see Section 3.2.2.2).
The du_avertz.tar file contains the sample files. Extract the sample files:
> tar xvf du_avertz.tar
.
.
.
The list of files printed should match the list in Table A–6.
7–10 Installing the TP Desktop Connector Client Services on Non-Windows Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
The sample makefile and executables for Motif on Tru64 UNIX use TCP/IP as
the default transport. If you have changed the client services library to use
DECnet, you must relink the sample application before you run it.
7.3.2 Verifying the Motif Sample Installation on Tru64 UNIX Platforms
Compile, link, and run the source code for the sample client program to verify
your capability to build applications. To build the sample application, follow
these steps:
1. Use the makefile provided to build the m_avertz sample application. In the
sample directory, run make:
> make
2. Run the application by entering the following command:
> m_avertz
The m_avertz application displays the menu bar of the AVERTZ Car
Reservation System. If you want the sample desktop client program to
communicate with the ACMS application, follow the procedures in Section 7.2.4
to set up the sample application on the ACMS system. After you set up the
ACMS system, use the Session menu to sign in to the ACMS system. After you
sign in, you can use the Rental menu to run the reserve task of the AVERTZ
application.
The installation procedure is now complete and verified.
Installing the TP Desktop Connector Client Services on Non-Windows Systems 7–11
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Part III
Installing the Gateway Software
Part III describes Compaq TP Desktop Connector Gateway for ACMS software
installation from the TPware Product Suite CD on an OpenVMS system and
presents the following major topics:
•
•
•
•
Preparing to Install TP Desktop Connector Gateway for ACMS Software
Installing TP Desktop Connector Gateway for ACMS Software
After Installing TP Desktop Connector Gateway for ACMS Software
Running the TP Desktop Connector Gateway for ACMS IVP
This part covers only the server-side software and samples, but not the
client-side software and samples. For client installations using the TPware
Product Suite CD, see Part II. For installations using the Software Products
Library CD, see Part I.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Preparing to Install TP Desktop Connector
Gateway for ACMS Software
This chapter discusses the preparations and requirements necessary for
installing Compaq TP Desktop Connector gateway for ACMS software. Your
bill of materials (BOM) specifies the number and contents of your media. Be
sure to verify the contents of your kit with this information. If your kit is
damaged or incomplete, contact your Compaq representative.
The gateway software includes online Release Notes and gives you the option
of printing or displaying them during the installation procedure. Compaq
strongly recommends that you read the Release Notes before proceeding with
the installation, in case they contain important information regarding the
installation procedure.
8.1 Required Operating System Components
See the Compaq TP Desktop Connector Software Product Description (SPD)
for a complete list of required operating systems for the Compaq TP Desktop
Connector gateway for ACMS.
8.2 Prerequisite Software
The Software Product Description (SPD), a copy of which is included in the
product kit, contains a list of the prerequisite software, and a complete list of
the products that are compatible with this version of gateway software.
8.3 Installation Procedure Requirements
The installation procedure, VMSINSTAL, checks for various conditions on
your system. If VMSINSTAL detects any problems during the installation,
it notifies you of the problem and asks whether you want to continue the
installation. In some instances, you can answer YES to continue. To stop the
Return
installation process and correct the situation, answer NO or press
.
Preparing to Install TP Desktop Connector Gateway for ACMS Software 8–1
Download from Www.Somanuals.com. All Manuals Search And Download.
You can avoid having to stop and restart VMSINSTAL by following the
directions in this section before you run VMSINSTAL. The time required for
installing gateway software is approximately five minutes.
8.3.1 Disk Space
Installing gateway software requires a certain amount of free storage space
during the installation. Table 8–1 summarizes the storage requirements for
gateway software during and after installation.
Table 8–1 Disk Space Requirements
Blocks During
Installation
Blocks After
Installation
Gateway
23,304
6,500
To determine the number of free disk blocks on the current system disk, enter
the following command at the DCL prompt:
$ SHOW DEVICE SYS$SYSDEVICE
In the output column under the heading Free Blocks is the number of 512-byte
blocks available on the device.
8.3.2 Privileges and Authorization
To install gateway software, you must be logged in to an account with the
following privileges:
NETMBX
SETPRV
TMPMBX
The SYSTEM account has all the privileges you require for the installation.
VMSINSTAL turns off the BYPASS privilege at the start of the installation
and sets whatever privileges it needs during the installation.
At the end of the installation procedure, if the gateway system components
were installed, the gateway process on OpenVMS is started using the same
user name that you use to install the product. Compaq recommends that you
run the gateway under the user name SYSTEM or another user name with a
[1,4] UIC.
8–2 Preparing to Install TP Desktop Connector Gateway for ACMS Software
Download from Www.Somanuals.com. All Manuals Search And Download.
For the gateway process to be properly started, the user name under which the
installation is done must be an authorized ACMS agent. Use the ACMSUDU
Utility to authorize the user name. For example:
$ SET DEFAULT SYS$SYSTEM
$ RUN ACMSUDU
UDU> ADD SYSTEM/AGENT
UDU>
If the user name is not authorized as a ACMS agent, the IVP can fail and TP
Desktop Connector client programs cannot sign in to the ACMS system. To
allow client programs to successfully sign in to the ACMS system, stop the
gateway, and restart it under a user name that is an authorized ACMS agent.
8.3.3 OpenVMS License Management Facility
The gateway supports the OpenVMS License Management Facility (LMF).
To install gateway software on an OpenVMS system, you must register your
software license.
LMF requires registration of a Product Authorization Key (PAK). The license
registration information you need is contained in the PAK that is shipped with
gateway software. The PAK is a paper certificate that contains information
about the license you have to run a particular piece of software.
Register your gateway license before you perform the installation. During the
installation, you are asked whether you have registered the gateway license
and loaded the appropriate authorization key. You cannot run either the
gateway software or its IVP unless your license is loaded. After you perform
the license registration and load an authorization key, you can run the IVP and
use the gateway software.
To register a license, first log in to the system manager account, SYSTEM. You
then have a choice of two ways to register:
•
Run the SYS$UPDATE:VMSLICENSE.COM procedure. When it prompts
you for information, respond with data from your PAK.
•
Issue the LICENSE REGISTER command with the appropriate qualifiers
that correspond to information on the PAK.
For complete information on using LMF, see OpenVMS License Management
Utility Manual.
Preparing to Install TP Desktop Connector Gateway for ACMS Software 8–3
Download from Www.Somanuals.com. All Manuals Search And Download.
8.3.4 System Disk Backup
At the beginning of the installation, VMSINSTAL asks whether your system
disk is backed up. Compaq recommends that you always do a system disk
backup before installing new software on the operating system.
Use the backup procedures that are established at your site to do this backup.
For details on performing a system disk backup, see the section on the Backup
Utility in the OpenVMS documentation set.
8.3.5 Stopping the ACMS System and Gateway
If you have TPware components already installed and running, shut them
down. While logged in to the system under an account having the appropriate
privileges as described in Section 8.3.2, execute the following commands.
1. Stop the TP Desktop Connector Gateway for ACMS process. For example:
$ @SYS$STARTUP:ACMSDI$SHUTDOWN
$
2. If you have ACMS software already installed and running, shut it down.
Execute the following commands.
a. Stop the ACMS system. For example:
$
ACMS/STOP SYSTEM
.
.
.
$
b. Stop the ACMS controller. For example:
$
@SYS$STARTUP:ACMSTOP
.
.
.
$
8.3.6 Locating the Saveset Directory
If you have not already inserted the compact disk (CD) media in the CD drive,
do so now. To obtain the saveset for the gateway software from the CD-ROM,
complete these steps:
1. To determine whether the CD-ROM drive is already mounted (MOUNT
command), enter a command in the following format:
SHOW DEVICE device-name
8–4 Preparing to Install TP Desktop Connector Gateway for ACMS Software
Download from Www.Somanuals.com. All Manuals Search And Download.
2. If the device is not mounted, enter a command in the following format:
MOUNT/OVERRIDE=ID device-name
For example:
$ MOUNT/OVERRIDE=ID DKA200:
3. Locate the distribution files. Use a DIRECTORY command in the following
format and specify the indicated directory specification and saveset name.
DIRECTORY device-name:[000000]ACMSDI*.*
The command lists the various backup savesets.
You supply this location when you invoke VMSINSTAL (see Section 9.2.1).
Preparing to Install TP Desktop Connector Gateway for ACMS Software 8–5
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Installing TP Desktop Connector Gateway
for ACMS Software
This chapter describes how to install Compaq TP Desktop Connector gateway
for ACMS software. Section 9.1 provides helpful information about installing
the gateway software. Section 9.2 contains a step-by-step description of the
installation procedure.
9.1 General Installation Information
This section includes the following information.
•
•
Accessing Release Notes (see Section 9.1.1)
Determining the files and logical names added to your system (see
Section 9.1.2)
•
•
Running the Installation Verification Procedure (IVP) (see Section 9.1.3)
Aborting the installation (see Section 9.1.4)
9.1.1 Accessing the Online Release Notes
The gateway software provides online Release Notes. To activate the prompt
about displaying or printing the Release Notes, invoke VMSINSTAL with the
OPTIONS N parameter.
After the gateway software has been installed, the Release Notes are located in
a directory with public access.
Installing TP Desktop Connector Gateway for ACMS Software 9–1
Download from Www.Somanuals.com. All Manuals Search And Download.
9.1.2 Files and Logical Names Installed on Your System
The following files contain a list of the files added to your system by the
gateway installation:
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$FIRST_FILES.DAT
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$SAMPLE_ADD_FILES.DAT
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$SAMPLE_AVERTZ_FILES.DAT
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$SAMPLE_COMMON_FILES.DAT
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$SAMPLE_EMPLOYEE_FILES.DAT
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$SYSTEM_FILES.DAT
You can display or print these files after you install the gateway software.
After the installation, if the gateway is started (by ACMSDI$STARTUP.COM),
the following logical names are added to your system:
ACMSDI$EXAMPLES
ACMSDI$EXAMPLES_ACMS
ACMSDI$EXAMPLES_ADD
ACMSDI$EXAMPLES_AVERTZ
ACMSDI$EXAMPLES_EMPLOYEE
ACMSDI_AVERTZ_DEFAULT
AVERTZ_TDB
These logical names are entered into the system logical name table. The names
are used in various gateway startup files. Thus, they are automatically entered
into the system logical name table whenever the gateway startup command file
is executed.
9.1.3 Installation Verification Procedure
The Installation Verification Procedure (IVP) for gateway software verifies the
installation. During the installation, you are asked whether you want to run
the IVP as part of the installation. If you answer YES, VMSINSTAL runs the
IVP. It is recommended that you run the IVP to be sure that the software is
installed correctly.
After you install the gateway software, you can run the IVP independently to
verify that the software is available on your system. You might also want to
run the IVP after a system failure to be sure that users can access gateway
software. See Chapter 11 for information about running the IVP separately
from the installation procedure.
9–2 Installing TP Desktop Connector Gateway for ACMS Software
Download from Www.Somanuals.com. All Manuals Search And Download.
9.1.4 Aborting the Installation
Ctrl/Y
To abort the installation procedure at any time, press
. When you press
Ctrl/Y
, the installation procedure deletes all files it has created up to that point
and exits. You can then start the installation again.
9.2 Installation Procedure
Perform the steps in the following sections to install the gateway software.
9.2.1 Invoking VMSINSTAL
If your system is prepared as described in Chapter 8, perform the following
steps to start the installation process.
1. Log into the system under a privileged account (see Section 8.3.2) and set
the default to the desired directory. For example:
$ SET DEFAULT SYS$UPDATE
$
SYS$UPDATE is used in this example.
2. Use the following syntax to invoke VMSINSTAL:
@SYS$UPDATE:VMSINSTAL saveset-name device-name OPTIONS N
The parameter saveset-name represents the installation name for the
component. For the gateway software, use the following installation name:
ACMSDI
If you do not supply the saveset name, VMSINSTAL prompts you for it
later in the installation procedure.
The parameter device-name represents the location of the saveset files.
•
If you install from the Software Products Library CD, use the location
obtained from following the steps described in Section 2.1.
•
If you install from the TPware Product Suite CD, use the location of
the saveset directory on that media (see Section 8.3.6).
If you do not supply device-name, VMSINSTAL prompts you for this
information later in the installation procedure.
OPTIONS N is an optional parameter indicating that you want to be
prompted to display or print the Release Notes. If you do not include the
OPTIONS N parameter, VMSINSTAL does not prompt you to display or
print the Release Notes.
VMSINSTAL supports several other options. For information, refer to the
OpenVMS documentation on software installation.
Installing TP Desktop Connector Gateway for ACMS Software 9–3
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Execute the installation procedure. For example:
$ @SYS$UPDATE:VMSINSTAL ACMSDI DKA200:[000000] OPTIONS N
This command begins installing the ACMSDI saveset found in the directory
[000000] on the CD device named DKA200.
VMSINSTAL asks several installation questions as described in Section 9.2.2.
9.2.2 Installation Questions
This section discusses the questions that appear during the installation. Each
question in the installation is marked with an asterisk ( * ) at the beginning of
the line. Some questions show the default response in brackets, for example,
Return
[YES]. To give the default response, press
.
1. Confirming active processes
VMSINSTAL displays a list of all active processes. It then asks whether
you want to continue the installation. Install the gateway software on a
standalone system or cluster with DECnet shut down to minimize possible
installation problems.
%VMSINSTAL-W-ACTIVE, The following processes are still active:
.
.
.
* Do you want to continue anyway [NO]? YES
2. Confirm system backup
VMSINSTAL asks whether you are satisfied with your system backup.
Always back up your system disk before performing an installation. If you
Return
are satisfied with the backup of your system disk, press
. Answer
NO to discontinue the installation. After you back up your system disk,
restart the installation.
* Are you satisfied with the backup of your system disk [YES]?
3. Mounting the media
VMSINSTAL now displays the CD device name and asks whether you are
ready to continue with the installation.
Answer YES to indicate that the CD is mounted. VMSINSTAL displays a
message that the media containing gateway software is mounted on the
specified device and that the installation is beginning. For example:
9–4 Installing TP Desktop Connector Gateway for ACMS Software
Download from Www.Somanuals.com. All Manuals Search And Download.
Please mount the first volume of the set on DKA200:.
* Are you ready? YES
%MOUNT-I-MOUNTED, ACMSDI mounted on DKA200:
The following products will be processed:
ACMSDI V3.1A
Beginning installation of ACMSDI V3.1A at 13:14
%VMSINSTAL-I-RESTORE, Restoring product save set A...
If you enter the wrong device name when you invoke VMSINSTAL and
need to restart the installation, answer NO in response to the Are you
ready? question. See Section 8.3.6 for instructions on mounting the CD.
Ctrl/Y
To abort the installation for other reasons, press
.
4. Release Notes
If you specified OPTIONS N when you invoked VMSINSTAL, you see
several options for reviewing the Release Notes. The following options are
displayed:
Release Notes included with this kit are always copied to SYS$HELP.
Additional Release Notes Options:
1. Display release notes
2. Print release notes
3. Both 1 and 2
4. None of the above
* Select option [2]: 1
•
Option 1
If you select option 1, VMSINSTAL displays the Release Notes
immediately on the console terminal. You can terminate the display
Ctrl/C
at any time by pressing
. Because the Release Notes are several
pages long, it is recommended that you choose option 2 to print the
Release Notes rather than reviewing them on line.
•
Option 2
If you select option 2, VMSINSTAL prompts for the name of the print
queue to use:
* Queue name [SYS$PRINT]:
Return
Enter the name of an ANSI print queue on your system, or press
to send the file to the default queue shown within the square brackets.
•
Option 3
Installing TP Desktop Connector Gateway for ACMS Software 9–5
Download from Www.Somanuals.com. All Manuals Search And Download.
If you select option 3, VMSINSTAL displays the Release Notes and
prompts for a queue name for the printed version.
•
Option 4
If you select option 4, VMSINSTAL continues the installation.
5. Continuing the installation
The installation procedure asks whether you want to continue the
Return
installation. To continue, answer YES. Otherwise, press
. In either
case, the Release Notes are copied to a file in the SYS$HELP directory. For
example:
* Do you want to continue the installation [N]?: YES
%VMSINSTAL-I-RELMOVED, Product’s Release Notes have been moved to SYS$HELP.
c Compaq Computer Corporation. 1999. All Rights Reserved.
The name of the Release Notes file installed by VMSINSTAL consists of the
current product name and version number. If you plan to compare previous
versions of gateway software, do not delete the Release Notes for previous
versions of the gateway.
6. Choosing to purge files
You can purge files from previous versions of the gateway that are
superseded by this installation. Purging is recommended, however, if
you need to keep files from a previous version, answer NO in response to
this question:
* Do you want to purge files replaced by this installation [YES]?
7. Choosing to run the IVP
If you are installing the gateway system components, the installation
procedure asks whether you want to run the IVP. The IVP checks that the
software is installed correctly. It is recommended that you run the IVP.
* Do you want to run the IVP after the installation [YES]? YES
Return
Press
to run the IVP after installing gateway software. Answer NO
to omit the IVP. Run the IVP independently after the installation to check
the consistency of the gateway software. See Chapter 11 for information
about how to run the gateway IVP independently of the installation
procedure.
8. Confirming license registration
9–6 Installing TP Desktop Connector Gateway for ACMS Software
Download from Www.Somanuals.com. All Manuals Search And Download.
VMSINSTAL asks whether you have a PAK installed. You can install
gateway software prior to registration; however, the software is unusable
until you register the license.
Looking up the Product Authorization Information.
Product:
Producer:
Version:
TP-DESKTOP-ACMS
DEC
3.1A
Release Date: 31-AUG-1999
* Does this product have an authorization key registered and loaded? YES
If you answer NO, the installation completes but the IVP is not run. If you
answer YES and the license is not registered, the IVP fails.
9.2.3 Informational Messages
At this point, the installation procedure displays a number of informational
messages that report on the progress of the installation and advise about
different uses of the product. There are no further questions.
%ACMSDI-I-PROCEED, There are no further questions and all checks have been completed.
-ACMSDI-I-PROCEED, It will take approximately 15 minutes to complete the
installation.
%VMSINSTAL-I-ACCOUNT, This installation updates an identifier named ACMSDI$CLIENT.
%UAF-I-RDBMDFYMSG, identifier ACMSDI$CLIENT modified
.
.
.
Read the instructions, because they might apply to your installation.
If the installation procedure has been successful up to this point, VMSINSTAL
moves the new or modified files to their target directories and updates help
files. If you asked for files to be purged, that work is done. The following
message is displayed:
.
.
.
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
.
.
.
If you are installing gateway software on a system disk that has limited
free space, VMSINSTAL might not be operating in safety mode. In this
case, VMSINSTAL processes all files immediately and does not display the
%VMSINSTAL-I-MOVEFILES... message.
Installing TP Desktop Connector Gateway for ACMS Software 9–7
Download from Www.Somanuals.com. All Manuals Search And Download.
If the disk has quotas enabled, a message is displayed. The account must have
sufficient disk quotas to install. Refer to Table 8–1.
9.2.4 Running the Installation Verification Procedure
If you chose to run the IVP, VMSINSTAL runs it next. When the IVP runs
successfully, you see the following messages displayed:
%RUN-S-PROC_ID, identification of created process is 210031D5
Starting Server ACMSDI$SERVER
The TP Desktop Connector V3.1A Gateway for ACMS IVP completed successfully
Installation of ACMSDI V3.1A completed at 13:32
.
.
.
The TP Desktop Connector V3.1A Gateway for ACMS IVP completed successfully
9.2.5 Completing the Installation Procedure
The following messages indicate that the installation procedure is complete:
Installation of ACMSDI V3.1A completed at 13:32
VMSINSTAL procedure done at 13:33
$
You can now log out of the privileged account:
$ LOGOUT
SYSTEM
logged out at 31-AUG-1999 13:34:12.28
VMSINSTAL deletes or changes entries in the process symbol tables during
the installation. Therefore, to continue using the system account and restore
these symbols, log out and log in again. Proceed to Chapter 10 to follow
postinstallation procedures.
9.3 Recovering from System and Installation Failures
An unsuccessful installation can result from a system failure (see Section 9.3.1)
or errors encountered during the installation procedure (see Section 9.3.2).
9.3.1 System Failures
If you experience a system failure, such as a power loss during installation,
VMSINSTAL attempts to continue the installation when you reboot the system.
Depending on the point in the installation at which the system fails, one of
three conditions exists:
•
The system disk did not undergo any changes before the system failure.
VMSINSTAL instructs you to restart the installation.
9–8 Installing TP Desktop Connector Gateway for ACMS Software
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
The system disk used by the installation was corrupted. VMSINSTAL
instructs you to restore the system disk from the backup copy and restart
the installation.
VMSINSTAL continues the installation and can tell you to manually
purge replaced files, even if you request that they be purged automatically.
You can purge files, but remember that purging deletes all but the latest
version of all files on your system disk. If you have multiple versions of
system files to save, you can delete just the gateway files you want to
remove from system directories.
To purge files, perform the following steps:
1. Reboot the system.
2. Log in to the SYSTEM account.
3. Purge all system files using the following command:
$ PURGE/LOG SYS$SYSROOT:[*...]*.*
.
.
.
After you perform this task, the installation is complete.
After you see the message that indicates the beginning of the IVP, the
installation of the component software is complete. If the system fails
subsequently, VMSINSTAL displays the following message when you reboot.
%VMSINSTAL-I-RECOVER, TP Desktop Gateway for ACMS was being installed when the system crashed.
The installation completed satisfactorily.
This message indicates that VMSINSTAL finished successfully, not that the
installation of the gateway was successful.
VMSINSTAL does not automatically restart the IVP. Run the IVP
independently by following the steps described in Chapter 11.
9.3.2 Installation Failures
If the installation of the gateway software or a TP Desktop Connector sample
application fails for some reason other than a system failure, the installation
procedure displays a message describing the cause of the failure. To continue
with the installation, correct the condition causing the error and restart the
installation procedure from the beginning.
Errors can occur during the installation if any of the following conditions exist:
•
The operating system version is incorrect.
Installing TP Desktop Connector Gateway for ACMS Software 9–9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
A prerequisite software version is incorrect.
Quotas necessary for successful installation are insufficient.
System parameter values for successful installation are insufficient.
The OpenVMS help library is currently in use.
For descriptions of the error messages generated by these conditions, see
the OpenVMS documentation on system messages, recovery procedures,
and OpenVMS software installations. If you are notified that any of these
conditions exist, take the appropriate action as described in the message. (You
might need to change a system parameter or increase a quota value.) For
information on installation requirements, see Chapter 8.
If the installation of the component software completes satisfactorily, but a test
fails during the IVP, the IVP displays a message describing the failure and
suggests a course of action.
In most cases, the suggested course of action is to reinstall the gateway
software. If the IVP fails after you reinstall the gateway software, contact your
Compaq software specialist.
9.3.3 IVP Error Recovery
As the IVP executes, it checks the success of each test and operation it
performs. If any test or operation fails, the IVP displays a message describing
the failure and suggests a course of action.
Follow the suggested course of action and then restart the IVP as described in
Chapter 11. If you reinstall gateway software, the IVP runs automatically if
you answer YES to the IVP question. If you still cannot successfully run the
IVP, contact your Compaq software specialist.
9–10 Installing TP Desktop Connector Gateway for ACMS Software
Download from Www.Somanuals.com. All Manuals Search And Download.
10
After Installing TP Desktop Connector
Gateway for ACMS Software
After installing gateway software, perform the following tasks:
•
•
•
•
Edit OpenVMS system startup and shutdown files (see Section 10.1).
Perform any cluster operations (see Section 10.2).
Match client and server versions (see Section 10.3).
Read the management chapters in the appropriate document:
Com pa q TP Desktop Con n ector for ACMS Client Application
Programming Guide
Com pa q TP Desktop Con n ector Getting Started
See Chapter 11 for information about how to run the Installation Verification
Procedure (IVP) after the software has been installed.
10.1 Editing the OpenVMS System Files
You must edit the OpenVMS system startup and shutdown files to provide for
automatic startup and shutdown of TP Desktop software when your system is
rebooted. (This step is usually not necessary for system upgrades.)
10.1.1 Editing the System Startup File
The following files are located in the SYS$STARTUP directory.
ACMSDI$SHUTDOWN.COM
ACMSDI$STARTUP.COM
Add to the OpenVMS system startup file the command line that starts TP
Desktop. If you separate the startup procedures into modules, be sure that you
add the lines to the correct file.
After Installing TP Desktop Connector Gateway for ACMS Software 10–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Position the TP Desktop startup command line after the line that invokes the
ACMS startup command procedure. For example:
$ @SYS$STARTUP:ACMSTART.COM
.
.
.
$ @SYS$STARTUP:ACMSDI$STARTUP.COM
Note
Start ACMS software before you start TP Desktop software.
Starting TP Desktop software automatically enables the use of the DECnet
communication transport. To use TCP/IP protocols as well, or instead of
DECnet, list the transports you want to use in a parameter file. Specify the
parameter file as a qualifier on the TP Desktop startup command line.
The parameter file is a simple ASCII text file that lists your overrides to
TP Desktop run-time quotas and defaults. These overrides can include the
specification of the communication libraries that have been installed on the
OpenVMS system. For example, to enable TP Desktop to use all transports,
perform the following steps.
1. Create the following file in the SYS$MANAGER directory:
ACMS_DESKTOP_SERVER.DAT
2. Include in the file the following line:
transport=(tcpip,decnet)
3. Modify the startup command line to specify the parameter file. For
example:
$ @SYS$STARTUP:ACMSDI$STARTUP.COM SYS$MANAGER:ACMS_DESKTOP_SERVER.DAT
To perform this same function in batch from DCL-level, issue a SUBMIT
command. For example:
$ SUBMIT/USER=SYSTEM/NOLOG SYS$STARTUP:ACMSDI$STARTUP-
_$ /PARAMETER=(SYS$MANAGER:ACMS_DESKTOP_SERVER.DAT)
This command starts a batch job that runs the startup command procedure
using the input file specified in the parameter qualifier. When the batch job
completes, the TP Desktop software is started.
10–2 After Installing TP Desktop Connector Gateway for ACMS Software
Download from Www.Somanuals.com. All Manuals Search And Download.
10.1.2 Editing the System Shutdown File
Find the following line, which stops the ACMS system, in the OpenVMS
system shutdown file:
$ @ACMSTOP.COM
At some point before this line, add the following command line:
$ @SYS$STARTUP:ACMSDI$SHUTDOWN.COM
The command procedure cancels all active tasks and shuts down the TP
Desktop process. This ensures that the TP Desktop system processes are run
down properly. The command procedure also deinstalls TP Desktop images
(using the Install Utility of OpenVMS) and deassigns the logical names.
10.2 Performing Cluster Procedures
Because TP Desktop software treats a VMScluster system as if it were a local
area network (LAN), you must prepare system-specific roots on each node of
the cluster. For example:
$ CREATE/DIRECTORY SYS$SPECIFIC:[ACMSDI]/OWNER_UIC=SYSTEM-
_$ /PROTECTION=(S:RWE,O:RWE,G:RE,W:RE)
$ CREATE/DIRECTORY SYS$SPECIFIC:[SYSTEST.ACMSDI]/OWNER_UIC=SYSTEM-
_$ /PROTECTION=(S:RWE,O:RWE,G:RE,W:RE)
$ CREATE/DIRECTORY SYS$SPECIFIC:[SYSHLP.EXAMPLES.ACMSDI]/OWNER_UIC=SYSTEM-
_$ /PROTECTION=(S:RWE,O:RWE,G:RE,W:RE)
$
Executed on each node in the cluster, these commands create directory roots for
the TP Desktop software. See Section 9.1.2 for the locations of files describing
the directories added to your system.
10.3 Matching Client and Server Versions
If you are upgrading from ACMS Desktop Version 2.n to TP Desktop Version
3.m, you can use your existing client programs with the new server. But, if you
build a new client program under TP Desktop Version 3.m, you cannot use this
new program with the old ACMS Desktop Version 2.n server.
When the ACMS communication protocols do not match those of the desktop
client, the gateway rejects the attempted connection. The gateway writes a
message to the software event log (SWL).
The error code returned on the client side depends on the nature of the
mismatch. The following error codes can indicate a mismatched condition:
After Installing TP Desktop Connector Gateway for ACMS Software 10–3
Download from Www.Somanuals.com. All Manuals Search And Download.
ACMSDI_SRVDEAD
-3020
ACMSDI_INVPROTOCOL -3025
10–4 After Installing TP Desktop Connector Gateway for ACMS Software
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Running the TP Desktop Connector
Gateway for ACMS IVP
This chapter describes how to run the gateway installation verification
procedure (IVP) separately from the installation procedure. The IVP can be
run as a part of the normal installation when you answer YES to the IVP
question. If the IVP fails for any reason, correct the error and rerun the IVP.
See Chapter 9 for information on providing the IVP with information required
for the installation procedure. Run separately from the installation procedure,
the IVP can check the integrity of installed files on the system.
11.1 IVP Operations
The IVP checks that:
1. The installation procedure successfully completed installing TP Desktop
software.
2. The installed software can be used to set up and run TP Desktop software.
3. All the necessary files are on the system.
The IVP does not check that the applications run correctly.
11.2 Running the IVP Independently
This section describes the requirements and steps to run the IVP.
11.2.1 IVP Requirements
If disk quotas are enabled, the IVP cannot run. The procedure checks to see
whether disk quotas are enabled just after checking the process quotas. If disk
quotas are enabled, the procedure provides an informational message to that
effect and terminates.
Running the TP Desktop Connector Gateway for ACMS IVP 11–1
Download from Www.Somanuals.com. All Manuals Search And Download.
11.2.2 IVP Steps
To run the IVP independently of the installation procedure, follow these steps:
1. Log in to the SYSTEM account:
Username: SYSTEM
Password:
2. Set your default to the test directory:
$ SET DEFAULT SYS$TEST
$
3. Run the IVP using the following file specification:
ACMSDI$IVP.COM
You can run the IVP only on your current booted system. You cannot run
the IVP over a networked connection.
To start the IVP, enter the following command:
$ @ACMSDI$IVP
The TP Desktop Connector V3.2 Gateway for ACMS IVP completed successfully
.
.
.
The TP Desktop Connector V3.2 Gateway for ACMS IVP completed successfully
The IVP takes no more than 30 seconds to run, depending on the current
system load.
11.2.3 IVP Error Recovery
As the IVP executes, it checks the success of each test and operation it
performs. If any test or operation fails, the IVP does the following:
1. Stops processing.
2. Displays a message describing the failure.
3. Suggests a course of action to eliminate the cause of the failure.
Follow the suggested course of action and then restart the IVP.
11–2 Running the TP Desktop Connector Gateway for ACMS IVP
Download from Www.Somanuals.com. All Manuals Search And Download.
Part IV
Appendixes
Part IV provides reference material related to software installation on a
system.
Appendix A lists the files that are installed on your system for the various
sample programs.
Appendix B contains helpful hints about errors that might occur when you run
one of the sample applications.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
A
Files Installed
The following tables list the files that are installed on your systems for the
various sample applications.
Table A–1 Files Installed for TP Desktop Connector Client Services for
OpenVMS Systems
Files
Description
ACMSDI.H
Include file for the TP Desktop Connector client services
declarations
ACMSDI$CLIENT_
OBJ LIB.OLB
Library for the TP Desktop Connector client services
FORMS.H
Include file for DECforms
DECnet object file
NET_DECNET.OBJ
NET_TCPIP.OBJ
PPSTUBS.C
TDMS.H
TCP/IP object file
Presentation procedure and action routine stubs
Include file for TDMS
Table A–2 Files Installed for the Motif Sample for OpenVMS Systems
Name
Description
Makefile
Makefile for building the sample
acmsdi.h
Include file for the TP Desktop Connector client services
Sample include file with DECforms status values
Overview of the AVERTZ user interface
Motif sample resource file
forms.h
help.txt
sys$login:m_avertz.dat
(continued on next page)
Files Installed A–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A–2 (Cont.) Files Installed for the Motif Sample for OpenVMS Systems
Name
Description
m_avertz.c
Entry point for the sample; manages the main window of
the sample
m_avertz.h
AVERTZ header file; defines global names
m_avertz.opt
m_avertz.uid
m_avertz.uil
Linker-purge options file for building the sample
Runtime representation of the sample’s UIL definition
User interface template; defines the layout of the main
window and the session dialog box
m_avertzpp.c
Reserve task presentation procedures; stubs for the checkin
and the checkout tasks’ presentation procedures
m_avertzpp.h
m_disable.c
m_enable.c
Header file for m_avertzpp.c
Presentation procedure stub
Presentation procedure stub
m_icons.uil
User interface template; defines the various session icons
Provides linked list feature
m_list_pkg.c
m_list_pkg.h
m_message.c
m_message.h
m_read_write.c
m_receive.c
m_request.c
m_resvform.c
Header file for list_pkg.c
Performs message box handling in the sample
Header file for m_message.c
Presentation procedure stub
Presentation procedure stub
Presentation procedure stub
Management and convenience routines for handling the
reservation form
m_resvform.h
Header file for m_resvform.c
m_resvform.uil
User interface template; defines the layout of the
reservation form
m_send.c
Presentation procedure to dispatch to specific routines in
m_avertzpp.c
m_session.c
Manages multiple sessions; switches context for using TP
Desktop Connector gateway for ACMS routines and updates
the user interface
m_session.h
Header file for m_session.c
(continued on next page)
A–2 Files Installed
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A–2 (Cont.) Files Installed for the Motif Sample for OpenVMS Systems
Name
Description
m_sitelist.c
Creates (using m_sites.dat) and manages the list box of
AVERTZ sites
m_sitelist.h
m_sites.dat
Header file for m_sitelist.c
Contains data about AVERTZ sites; read in at run time
m_transceive.c
Presentation procedure that dispatches to specific routines
in avertzpp
m_version.c
m_wkspaces.c
m_wkspaces.h
tdms.h
Version-checking action routine stub
Support routines for AVERTZ workspace structures
Defines the AVERTZ workspace structures
Sample include file with TDMS status values
Table A–3 Files Installed for the Visual Basic Windows Sample
Name
Description
mainmenu.frm
GUI objects and code for the main window of Visual Basic
AVERTZ
reserve.frm
signin.frm
GUI objects and code for the car rental reservations screen
of Visual Basic AVERTZ
GUI objects and code for the session-login screen of Visual
Basic AVERTZ
readme.1st
readme.txt
Contents of the folder in text format
Text document that explains how to use the helper DLL,
divb.dll
vbavertz.bas
vbavertz.exe
vbavertz.mak
Global source code for Visual Basic AVERTZ
Executable version of Visual Basic AVERTZ
Project makefile for Visual Basic AVERTZ
Files Installed A–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A–4 Files Installed for the Forced NonBlocking Tutorial
Name
Description
ACMSDI.BAS
FORM1.FRM
ACMSDI declarations for Visual Basic applications
GUI objects and code for the Forced Nonblocking Tutorial
main window
FORMS.BAS
DECforms message code definitions for Visual Basic
FNBSAMPL.MAK
FRMLOGIN.FRM
Visual Basic make file for the Forced Nonblocking Tutorial
GUI objects and code for the Forced Nonblocking Tutorial
session login window
FRMRECVC.FRM
MTEXT.BAS
GUI objects and code for the Forced Nonblocking Tutorial
receive control text window
Declarations and code to initialize ACMSDI message text
for Visual Basic applications
NONBLK.BAS
Global declarations for the Visual Basic Forced Nonblocking
Tutorial
Table A–5 Files Installed for the Client Services for Tru64 UNIX Systems
Name
Description
acmsdi.h
forms.h
Include file for the TP Desktop Connector client services
Include file for DECforms
libacmsdi.a
net_tcpip.o
ppstubs.c
tdms.h
Library for TP Desktop Connector client services
TCP/IP file for TP Desktop Connector client services
Presentation procedure and action routine stubs
Include file for TDMS
Table A–6 Files Installed for the Motif Sample for Tru64 UNIX Systems
Name
Description
makefile
acmsdi.h
forms.h
help.txt
Makefile for building the sample
Include file for the TP Desktop Connector client services
Sample include file with DECforms status values
Overview of AVERTZ user interface
(continued on next page)
A–4 Files Installed
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A–6 (Cont.) Files Installed for the Motif Sample for Tru64 UNIX Systems
Name
Description
load_motif.sh
Command shell to download the Motif sample from the
OpenVMS system
m_avertz
Motif sample executable file
m_avertz.c
Entry point for the sample; manages the main window of
the sample
m_avertz.dat
m_avertz.h
Font definitions for the sample screens
AVERTZ header file; defines globals
m_avertz.uid
m_avertz.uil
Runtime representation of the sample UIL definition
User interface template; defines the layout of the main
window and the session dialog box
m_avertzpp.c
Reserve task presentation procedures; stubs for the checkin
and the checkout tasks’ presentation procedures
m_avertzpp.h
m_disable.c
m_enable.c
Header file for m_avertzpp.c
Presentation procedure stub
Presentation procedure stub
m_icons.uil
User interface template; defines the various session icons
Provides linked list feature
m_list_pkg.c
m_list_pkg.h
m_message.c
m_message.h
m_read_write.c
m_receive.c
m_request.c
m_resvform.c
Header file for list_pkg.c
Performs message box handling in the sample
Header file for m_message.c
Presentation procedure stub
Presentation procedure stub
Presentation procedure stub
Management and convenience routines for handling the
reservation form
m_resvform.h
Header file for m_resvform.c
m_resvform.uil
User interface template; defines the layout of the
reservation form
m_send.c
Presentation procedure to dispatch to specific routines in
m_avertzpp
(continued on next page)
Files Installed A–5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A–6 (Cont.) Files Installed for the Motif Sample for Tru64 UNIX Systems
Name
Description
m_session.c
Manages multiple sessions; switches context for using TP
Desktop Connector gateway for ACMS routines and updates
the user interface
m_session.h
m_sitelist.c
Header file for m_session.c
Creates (using m_sites.dat) and manages the list box of
AVERTZ sites
m_sitelist.h
m_sites.dat
Header file for m_sitelist.c
Contains data about AVERTZ sites; read in at run time
m_transceive.c
Presentation procedure that dispatches to specific routines
in m_avertzpp.c
m_version.c
m_wkspaces.c
m_wkspaces.h
tdms.h
Version-checking action routine stub
Support routines for AVERTZ workspace structures
Defines the AVERTZ workspace structures
Sample include file with TDMS status values
A–6 Files Installed
Download from Www.Somanuals.com. All Manuals Search And Download.
B
Common Configuration Errors
The following sections discuss some of the errors that can occur while running
the TP Desktop Connector client services sample applications.
B.1 Errors Related to the Desktop System
Errors can arise when any of the following conditions exits:
•
•
•
The TP Desktop Connector client program node does not have the network
software functioning correctly.
The TP Desktop Connector client program node does not have the network
in the directory search path.
The TP Desktop Connector client program node has insufficient disk space.
B.1.1 Errors on OpenVMS Desktops
If errors occur in running the Motif Avertz program, verify the following:
•
The m_avertz.uid file is in the directory from which you run the m_avertz
application.
•
The m_avertz.dat file (your resources file) is located in your home directory.
If you encounter font-support problems running the program, you can modify
the fonts used by editing the m_avertz resources file (m_avertz.dat in the user ’s
home directory).
B.1.2 Errors on Tru64 UNIX Desktops
If errors occur in running the Motif Avertz program, verify the following:
•
The m_avertz.uid file is in the directory from which you run the m_avertz
application.
•
The m_avertz file (your resources file) is located in your home directory.
If you are installing this application once for use by many users, make sure
that the users copy m_avertz to their home directories.
Common Configuration Errors B–1
Download from Www.Somanuals.com. All Manuals Search And Download.
If you encounter font-support problems running the program, modify the
fonts used by editing the m_avertz resources file (m_avertz in the user ’s home
directory).
B.2 Errors Related to the ACMS System
If you have used the client services sample to communicate with the ACMS
system, errors will occur if any of the following conditions exists:
•
The TP Desktop Connector Gateway for ACMS system directory
ACMSDI$EXAMPLES_AVERTZ, or ACMSDI$EXAMPLES_ADD
ACMSDI$EXAMPLES
,
is protected against read access.
•
•
The TP Desktop Connector Gateway for ACMS system does not have the
sample files installed.
The TP Desktop Connector Gateway for ACMS system does not have the
network software functioning correctly.
•
•
•
The TP Desktop Connector Gateway for ACMS system is unavailable.
The TP Desktop Connector Gateway for ACMS system name is invalid.
The TP Desktop Connector Gateway for ACMS system is not running the
ACMS software.
•
•
•
The TP Desktop Connector Gateway for ACMS system has not invoked
ACMSDI$STARTUP.COM and ACMS/START SYSTEM
.
The TP Desktop Connector Gateway for ACMS software is not installed or
is improperly installed.
The TP Desktop Connector Gateway for ACMS system IVP failed.
B–2 Common Configuration Errors
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Configuration errors, B–1
A
ACMS
D
starting, 10–2
stopping system, 8–4
DECnet, 6–3
DECnet enabling, 10–2
Disk space, 5–2, 8–2
determining free, 1–3, 8–2
requirements
ACMSADU utility use, 8–3
ACMSDI$CLIENT modification, 9–7
ACMSDI$SYSTEM_FILES.DAT, 9–2
ACMS_DESKTOP_SERVER.DAT, 10–2
Administrator privileges, ix
gateway, 1–3
non-Windows, 5–2
Windows, 5–2
API
see TP Desktop Connector client services
Authorization, 8–3
Authorizing gateway user name, 8–3
AVERTZ
divb.dll, 6–3
divb.lib, 6–3
E
Editing
access control list, 3–8, 7–7
application notes, 3–7, 7–7
rebuilding, 3–8, 7–8
system shutdown file, 10–3
system startup file, 10–1
Environment variables, 6–2
Error recovery, 9–10
Errors, B–1
user name quota values, 3–8, 7–7
B
Back button, 6–2
Examples
logical name, 9–2
system-specific root, 10–3
C
Cancel button, 6–2
F
Cluster procedures, 10–3
Components
Failure recovery, 9–8
Files
TP Desktop Connector, 4–1, 5–1
CONDIST
client services
See Software Products Library
added to OpenVMS Desktop system,
A–1
installed on system, 9–2
Index–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Files (cont’d)
purge, 9–6
sample
L
License
added to OpenVMS desktop system,
A–1
checking, 8–3
sample applications, A–1
Forced Nonblocking
Visual Basic Sample Files, A–3
FTP, xii
installation question, 9–6
product, 5–2
registration, 8–3
LMF requirement, 8–3
Logical name
added to system, 9–2
Logical names
H
Hardware
defining, 3–2
for installation, 5–1
M
I
Memory copy procedures, 6–3
msvcrt40.dll, 6–3
Installation
aborting, 9–3
dialog box usage, 6–1
procedure, 6–1 to 6–2
procedures for, 9–1
questions, 9–4
N
Network transports, 6–3
Next button, 6–1
tasks following, 3–1, 10–1
Installing
O
gateway, 2–1
Operating system components, 8–1
OpenVMS client services, 7–3
OpenVMS Motif sample, 7–4
Tru64 UNIX client services, 7–9
Tru64 UNIX Motif sample, 7–10
ISO format, 7–1
P
PAK, 8–3
Parameter file, 10–2
specifying, 10–2
PATHWORKS, 6–3
IVP
error recovery, 11–2
operations performed by, 11–1
requirements to run, 11–1
running independently, 11–1
steps to run, 11–2
Portable API
see TP Desktop Connector client services
Prerequisite
hardware, 1–2
software, 1–2
Prerequisites
K
Kanji, 6–4
Key
gateway kit, 8–1
Privileges, ix, 8–2
BYPASS use, 8–2
product license, 5–2
Index–2
Download from Www.Somanuals.com. All Manuals Search And Download.
Program group
Transport
automatic enabling, 10–2
parameter file enabling, 10–2
creating, 6–2
Protocol mismatch, 10–3
Purge files, 9–6
U
R
User name requirement, 8–3
Rdb with multi-version, 7–7
Rdb with multiversion, 3–7
Release Notes
V
Verifying
accessing, 9–1
Motif client sample, 3–5
OpenVMS Motif sample, 7–5
Tru64 UNIX sample, 7–11
Version
matching client and server, 10–3
Visual Basic AVERTZ Sample
Verifying installation, 6–4
VMSINSTAL
Removing installed software, 5–3
Resources, 7–2
S
Sample
OpenVMS, 7–4
Tru64 UNIX, 7–10
Sample application setup
on OpenVMS, 3–6, 7–6
Saveset name, 9–3
Shutdown, 10–3
Software Products Library
installing, 2–1 to 2–3
SQL$USER library file, 3–7, 7–7
STDL version, 6–2
Storage requirements, 5–2
Superuser privileges, ix
System privileges, ix
System-specific roots, 10–3
System startup file
invoking, 9–3
requirements, 8–1 to 8–5
syntax, 9–3
VMSLICENSE.COM, 8–3
VR_DA_APPL
sample application, 3–7, 7–7
VR_DA_BLD_MMS.COM
parameters, 3–9, 7–8
W
Windows Sockets, 6–3
editing, 3–2
T
TCP/IP, 6–3
TCP/IP enabling, 10–2
Time for installation, 8–2
TP Desktop Connector
client services, 7–1 to 7–11
components, 4–1, 5–1
installation
Windows operating systems, 6–1
Index–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|