Clarion Car Video System VRX6671Z User Manual

Owner’s manual & Installation manual

Mode d’emploi et manuel d’installation

Manual de instrucciones y de instalación

VRX6671z

6.5” MONITOR & FM/AM RADIO WITH

CD/MD CHANGER CONTROL

•

MONITEUR DE 6,5 POUCES ET RADIO FM/AM

AVEC COMMANDE DE CHANGEUR

DE CD/MD

•

MONITOR DE 6,5-PULGADAS Y RADIO FM/AM

CON MANDO PARA EL CAMBIADOR DE

CD/MD

Clarion Co., Ltd.

Printed in China / Imprimé en Chine / Impreso en Chine /

QC-6700B

2000/2 (IT·K)

280-7362-30

Download from Www.Somanuals.com. All Manuals Search And Download.

4. MODE DISPLAY

The Color LCD Display and the Information Panel on the main unit show the following displays, provid-

ing information about the mode and functions operated.

1. PRECAUTIONS

WARNING

For your safety, the driver should not watch the TV or operate the controls while driving.

Please note that watching and operating the TV while driving are prohibited by law in some

countries. Also, while driving, keep the volume to a level at which external sounds can be

heard.

Display common to each mode

COLOR LCD DISPLAY

INFORMATION PANEL

4. TV broadcast reception

1. When the inside of the car is very cold and

the player is used soon after switching on the

heater, moisture may form on the disc (CD/

MD) or the optical parts of the player and

proper playback may not be possible. If mois-

ture forms on the disc (CD/MD), wipe it off

with a soft cloth. If moisture forms on the op-

tical parts of the player, do not use the player

for about one hour.The condensation will dis-

appear naturally allowing normal operation.

Contents

When receiving the TV broadcasts, the

strength of the signals changes since the car

is moving, so in some cases it may not be

possible to receive clear pictures.

MAIN

TV Operations.......................................26

TV functions.................................26

Watching TV..........................................26

Watching a video...................................26

Tuning..........................................26

Seek tuning...........................................26

Manual tuning.......................................26

Recalling a preset station.......................26

Manual memory.....................................27

Auto store.............................................27

Preset scan ..........................................27

Switching the VTR system between

NTSC and PAL................................27

Setting the TV diver...............................27

Adjusting the brightness and tone of

Output adjustment of auto loudness,

subwoofer and playback band.........32

Selecting the easy mode or the

professional mode...........................33

Woofer level adjustment.......................33

Easy mode/Setting the listening position 33

Selection of listening position...............33

Detail Adjustment of listening position...33

Easy mode/G.EQ operations...............34

G.EQ effect ON/OFF............................34

Calling G.EQ BASIC Pattern/USER

Pattern............................................34

Setting and storing G.EQ Properties/

Memory into USER Pattern..............34

Easy mode/DSP operations................35

DSP effect ON/OFF..............................35

Calling DSP BASIC Pattern/USER

• TV signals are strongly linear, so reception

is affected by buildings, mountains and other

obstacles.

• Such external factors such as electric train

lines, a high voltage lines, and signal devices

may disturb the picture or cause noise.

2. Driving on extremely bumpy roads which

cause severe vibration may cause the sound

to skip.

If the reception is poor, switch to a station with

good reception.

color..................................................28

Changing over TV display size.............28

Clock Time display

3. This unit uses a precision mechanism. Even

in the event that trouble arises, never open

the case, disassemble the unit, or lubricate

the rotating parts.

Pattern..............................................35

Setting and storing DSP Properties/

Memory into USER Pattern..............35

Professional mode/S.EQ operations....36

S.EQ effect ON/OFF..............................36

Calling S.EQ BASIC Pattern/USER

Pattern.........................................36

Setting and storing S.EQ Properties/

RearVision Camera ..............................29

Monitoring the rear vision camera.........29

Operation of External Visual

Devices (VISUAL Mode).............29

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/

TV technician for help.

Other Functions.....................................30

Always turning on the button illumination

on the operation panel..........................30

Entering titles......................................30

Title list play...........................................30

Clock Adjustment...................................31

Triggerd audio mute for cellular

Memory into USER Pattern.............36

Professional mode/P.EQ operations....37

P.EQ effect ON/OFF.............................37

Calling P.EQ BASIC Pattern/USER

Pattern.......................................37

Setting and storing P.EQ Properties/

Memory into USER Pattern................37

TITLE LIST mode display

COLOR LCD DISPLAY

INFORMATION PANEL

telepones...................................31

DSP operations.......................................32

DSP control function...........................32

DSP functions.....................................32

Operations common to each mode ...32

9. IN CASE OF DIFFICULTY........................39

10. ERROR DISPLAYS.................................41

11. SPECIFICATIONS.................................42

MODEL

VRX6 671 z

12V

GROUND

530kHz-1710kHz

87.9MHz-107.9MHz

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION.

Installation and

MODEL

VRX

671

12V

GROUND

530kHz-1710kHz

87.9MHz-107.9MHz

Wire conneceion manual...........43

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

ISO

8mmMAX

286-9262-30

Clarion Co.,Ltd.

MADE IN CHINA

SERIAL No.

QC-6700Y

ISO

8mmMAX

286-9262-30

Clarion Co.,Ltd.

MADE IN CHINA

SERIAL No.

QC-6700B

INFORMATION FOR USERS:

CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFAC-

TURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.

Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.

/ Cerciórese de desplegar y de leer la página siguiente.

VRX6 6 7 1 z

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROLS / COMMANDES / CONTROLES

2. CONTROLS / COMMANDES / CONTROLES

3. NOMENCLATURE

JOYSTICK Operation

Note:

• Many settings/procedures have to be performed by using the JOYSTICK ¡. Be sure to read this chapter

in order to operate it properly.

Main unit / Unité principale / Unidad principal

Names of Buttons

With the Display closed / Avec l`afficheur fermé / Con el visualisador cerrado

Note:

ꢀꢀSelecting an item in the menu

• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).

Select an item displayed in the menu by oper-

ating the JOYSTICK ¡ upward or downward.

With the display closed

With the display open

ꢀꢀSetting an option for the selected item

When the setting options for an item are listed

on the right of the display, you can choose the

desired option by operating the JOYSTICK ¡

leftward or rightward.Then, press the center of

the JOYSTICK ¡ to set your choice.

¥ Color LCD display

& A-M (Audio-Mode) button

* ADJ (Adjust) button

( TITLE button

1 POWER button

FUNC (Function) button

2 SEARCH button

VOLUME button

ꢀꢀWhen “push NEXT” is displayed next to

the menu item

) VISUAL button

3 PLAY/PAUSE button

4 Information Panel

5 PS (Preset scan)/AS (Auto store) button

SCN (Scan) button

¡ JOYSTICK

1. Press the ENT at the center of the JOY-

STICK ¡ to select the item and show the

setting display for this item.

™ Remote Control Infrared Sensor

With the Display open / Avec l`afficheur ouvert / Con el visualisador abierto

2. Operate the JOYSTICK ¡ upward or down-

ward to select the desired setting option,

then press ENT at the center of the JOY-

STICK ¡ to set your choice.

6 DCP RELEASE lever

7 WIDE button

RPT (Repeat) button

8 TV/VTR button

RDM (Random) button

9 Z-EHCR (Z-enhancer) button

0 ISR button

ꢀ Returning to the previous mode

Select the item “MENU” by operating the JOY-

STICK ¡ leftward or rightward, then press the

ENT at the center of the JOYSTICK ¡.

! OPEN button

@ DISP (Display) button

MONI ON/OFF button

# PRESET buttons (1 to 6)

DIRECT buttons (1 to 6)

$ MUTE button

% BAND button

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

VRX6 6 7 1 z

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO mode display

COLOR LCD DISPLAY

INFORMATION PANEL

MAIN

SUB

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

CD/MD Changer mode display

COLOR LCD DISPLAY

INFORMATION PANEL

MAIN

SUB

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

TV mode display

COLOR LCD DISPLAY

INFORMATION PANEL

MAIN

SUB

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

5. REMOTE CONTROL

When the panel is open

Remote control unit

W IDE

Inserting the Batteries

1. Turn the remote control unit over, then slide

the rear cover in the direction of the arrow.

2. Insert the AA (SUM-3, IECR-6/1.5V) batter-

ies that came with the remote control unit

facing in the directions shown in the figure,

then close the rear cover.

Notes:

Using batteries improperly can cause them to explode.

Take note of the following points:

• When replacing batteries, replace both batteries

with new ones.

• Do not short-circuit, disassemble or heat batteries.

• Do not dispose of batteries into fire or flames.

• Dispose of spent batteries properly.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

Functions of Remote Control Unit Buttons

Mode

CD changer

MD changer

Radio

Button

FUNC

BAND

DISC UP

TOP

Switches among Radio, CD changer, MD changer and TV.

Switches reception band.

Moves to the next disc in Switches reception band.

increasing order.

VOLUME

Increases and decreases volume (in all modes).

Moves preset channels

up and down.

Moves tracks up and

down.

Moves preset channels

up and down.

When pressed and held

for 1 second:

Fast-forward/

Fast-backward.

PLAY/PAUSE

No function.

Switches between

playback and pause.

No function.

•

MUTE

ISR

Turns mute on and off.

ISR on and off.

DISP

Turns on and off the monitor.

MONI

⁄

PS/AS

SCN

Preset scan.

Scan play.

Preset scan.

When pressed and held

for 2 seconds: Auto store.

When pressed and

held for 2 seconds:

Auto store.

When pressed and held

for 1 second: Disc scan

play.

WIDE

RPT

No function.

Repeat play.

Switches TV display size.

Switches the VISUAL mode.

When pressed and held

for 1 second: Disc repeat

play.

TV/VTR

RDM

‹

No function.

Random play.

Switches between TV and

VTR.

When pressed and held

for 1 second: Disc

random play.

›

VISUAL

Switches the VISUAL mode.

Notes:

• The remote control unit does not work when the panel is closed.

• Some of the corresponding buttons on the main unit and remote control unit have different functions.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

6. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

2. Lock the DCP/Operation Panel at the upper

center until a click is heard.

POWER button

We recommend taking the DCP with you when

leaving the car.

Removing the DCP

1. Turn the power off.

2. Deeply push in the DCP RELEASE lever 6

to release the DCP/Operation Panel.

3. Press the power button 1 to turn on the

DCP/RALEASE lever

power .

CAUTION

• The DCP can easily be damaged by shocks.

After removing it, be careful not to drop it

or subject it to strong shocks.

• If the Operation Panel is kept open, the DCP

may drop due to vibration of the car. This

results in damage to the DCP. So close the

Operation Panel or remove the DCP to store

into the case.

3. Pull the DCP toward you and remove it.

• The connector connecting the main unit and

the DCP is an extremely important part. Be

careful not to damage it by pressing on it

with fingernails, screwdrivers, etc.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

DCP/Operation Panel

cloth only.

Attaching the DCP

1. Hold the DCP/Operation Panel with its rear

side facing the main unit and, as shown in

the figure below, put the lower edge of the

panel onto the corresponding edge of the main

unit.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

7. CAUTIONS ON HANDLING

LCD panel/Generalities

For a longer service life, be sure to read the following cautions.

•

Be sure to store the LCD panel inside the

main unit when parking the car outdoors for

long period of time. The LCD panel will oper-

ate properly in a temperature range of 0 to

60°C.

•

Do not insert objects or poke in the space be-

tween the LCD panel and the main unit when

the panel is tilted.

•

Do not place anything on the display when

the panel is tilted.

•

Don’t allow any liquids on the set from drinks,

umbrellas etc. Doing so may damage the in-

ternal circuitry.

The remote controller may not work if the re-

mote control sensor is exposed to direct sun-

light.

•

Do not disassemble or modify the set in any

way. Doing so may result in damage.

•

In extremely cold weather, the display move-

ment may slow down and the display may

darken, but this is not a malfunction.The dis-

play will work normally when the temperature

increases.

Do not draw the LCD panel out and use it as

a tray. Also, subjecting the LCD panel to

shocks may result in breakage, deformation

or other damage.

•

Small black and shiny spots inside the LCD

panel are normal for LCD products.

•

Do not let cigarettes burn the display. Doing

so may damage or deform the cabinet.

The LCD panel may stop temporarily when it

opens or closes, when the engine stops or

when it is cold.

If a problem should occur, have the set in-

spected at your store of purchase.

Cleaning

• Cleaning the cabinet

• Cleaning the LCD panel

Use a soft, dry cloth and gently wipe off the dirt.

For tough dirt, apply some neutral detergent

diluted in water to a soft cloth, wipe off the dirt

gently, then wipe again with a dry cloth.

The LCD panel tends to collect dust, so wipe it

off occasionally with a soft cloth. The surface is

easily scratched, so do not rub it with hard ob-

jects.

Do not use benzene, thinner, car cleaner, etc.,

as these substances may damage the cabinet

or cause the paint to peel. Also, leaving rubber

or plastic products in contact with the cabinet

for long periods of time may cause stains.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

8. OPERATIONS

Note: Be sure to read this chapter referring to the front diagrams of

Basic Operations

chapter “2. CONTROLS” on page 5 (unfold).

Adjusting the volume

Operate the VOLUME button 2 in the direction

CAUTION

When the unit is turned on, starting and stop-

ping the engine with its volume raised to the

maximum level may harm your hearings. Be

careful about adjusting the volume.

of the arrows w (up) or z➜(down) to adjust the

volume;

w: Increases the volume.

z: Decreases the volume.

The volume level indicated in the display is in a

range from 0 (minimum) to 33 (maximum).

Note:

• Use this unit after starting the engine.

CAUTION

While driving, keep the volume at a level at

which external sounds can be heard.

Turning on and off the power

Note:

Switching the display

When the panel is closed:

• Be careful about using this unit for a long time with-

out running the engine. If you drain the car’s bat-

tery too far, you may not be able to start the en-

gine and this can reduce the service life of the

battery.

Press the DISP button

play.

to select the desired dis-

Each time you press the DISP button @, the dis-

1. Press the POWER button 1.

play switches in the following order:

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the POWER button 1 for 1 sec-

ond or longer to turn off the power for the unit.

Note:

• About the “SYSTEM CHECK”

The confirmation of connected equipment must be

performed for this unit only when the wiring con-

nection is complete and power is turned on to the

unit first. When the power is supplied, “SYSTEM ”

and “PUSH PWR” appear alternately in the dis-

play. Press the POWER button 1, the system

check starts inside the unit. When “COMPLETE”

appears, press once again the POWER button 1.

Selecting a mode

1. Press the FUNC button 1 to change the mode

of operation.

2. Each time you press the FUNC button 1, the

mode of operation changes in the following

order:

Notes:

• Once selected, the preferred display becomes the

default display. When a function adjustment such

as volume is made, the display momentarily

switches to that function’s display, then returns

back to the preferred display several seconds af-

ter the adjustment.

Radio mode ➜ CD changer mode ➜ MD

changer mode ➜ TV mode ➜ Radio mode...

External equipment not connected with CeNET

is not selected.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

•

If a title has been input, it is shown in the SUB dis-

play. If no title has been input, “---------” appears in

the display. To input a title, refer to the subsection

“Entering titles” in “Other Functions” section.

3. To store the Color LCD display ¥ in the source

unit, turn it to the horizontal position until a

click is heard.

• Some special characters of the title, will not be

displayed on the Information Panel of the DCP. In

this case, those characters will only be left blank.

Showing a mode display

When the panel is open:

Press the TITLE button ( to show the Title List

display. In the Title List display, the titles of items

stored in the PRESET buttons # 1 to 6 are listed.

For detailed information, refer to the section “Title

list play”.

Turning on and off the monitor

Pressing the DISP button @ turns the monitor

on and off.

Opening and turning the display

Notes:

• Do not place any object on the open display.

• Do not drop any object on the movable part.

• Do not expose the display to shocks.

1. Press the OPEN button ! to open the Color

LCD display ¥.

When a button is pressed or during security moni-

toring, the monitor-off mode is canceled.

Mute

Each time you press the MUTE button $, mute

is turned on and off.

If the Color LCD display ¥ is left horizontally

in the open position for 10 seconds or longer,

it is automatically drawn in.

“MUTE” appears when mute is turned on.

2. Turn the Color LCD display ¥ upwards to a

good view angle.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effect

stored in memory. Select the one you prefer.

When the monitor is turned upwards, a pic-

ture appears in the display. The Information

Panel 4 display disappears.

The factory default setting is “Z-EHCR OFF”.

When a Z-enhancer comes on (1-3), “Z-EHCR”

appears in the display.

• “Z-EHCR 1” (Z-Enhancer 1):

Setting emphasizing bass.

• “Z-EHCR 2” (Z-Enhancer 2):

Setting emphasizing treble.

• “Z-EHCR 3” (Z-Enhancer 3):

Setting emphasizing bass and

treble.

CAUTION

Do not turn the display unless it is completely

open.

• “Z-EHCR OFF” (Z-Enhancer off):

Neither bass nor treble are empha-

sized by the Z-enhancer.

When adjusting the angle of the display be

careful no to let your fingers get caught by

the panel or instrument panel of the vehicle.

Note:

• Incapable of operation when connecting DSP

(DPH7500z).

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

Basic Operations

When the panel is closed:

Adjusting the bass and treble

Notes:

Each time you press the Z-EHCR button 9, the

tone effect changes in the following order:

• This function is enabled only when the panel is

open.

• This function can be adjusted only when the Z-

enhancer is OFF.

“Z-EHCR 1” ➜ “Z-EHCR 2” ➜ “Z-EHCR 3” ➜

“Z-EHCR OFF” ➜ “Z-EHCR 1”...

1. Press the A-M button & to change into the

When the panel is open:

AUDIO-MODE display.

1. Press the A-M button & to change into the

2. Operate the JOYSTICK ¡ upward or down-

ward to select “BAS/TRE”. Then press the

ENT at the center of the JOYSTICK ¡ to

change into the BASS/TREBLE adjusting dis-

play.

AUDIO-MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “Z-EHCR”. Press the ENT at

the center of the JOYSTICK ¡ to change into

the Z-enhancer selecting display.

3. Operate the JOYSTICK ¡ rightward or left-

ward to adjust the “BASS” or “TREBLE”.

3. Operate the JOYSTICK ¡ upward or down-

ward to select out of:

4. Operate the JOYSTICK ¡ upward or down-

ward to adjust a level (adjustment range: from

-6 to 6).

“TYPE 1” (Z-Enhancer 1) “TYPE 2” (Z-En-

hancer 2)

“TYPE 3” (Z-Enhancer 3)

“OFF” (Z-Enhancer off),

5. When the adjustment is finished, operate the

JOYSTICK ¡ rightward or leftward to move

the cursor to “MENU”.Then press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

and press the ENT at the center of the JOY-

STICK ¡ to set a desired Z-enhancer.

4. When the setting is finished, operate the JOY-

STICK ¡ rightward or leftward to move the

cursor to the “MENU”.Then press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

Adjusting the balance and fader

Note:

To return from the AUDIO-MODE display to the

STANDARD display, press the A-M button &

once again.

• This function is enabled only when the panel is

open.

1. Press the A-M button & to change into the

AUDIO-MODE display.

Adjusting the Z-enhancer

Note:

• This function is enabled only when the panel is

open.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “BAL/FAD”. Then press the

ENT at the center of the JOYSTICK ¡ to

change into the BAL/FAD adjusting display.

1. Press the A-M button & to change into the

3. Operate the JOYSTICK ¡ rightward or left-

ward to select “BALANCE” or “FADER”.

AUDIO-MODE display.

2. Operate the JOYSTICK ¡ upward or down-

4. Operate the JOYSTICK

upward or down-

ward to select

at the center of the JOYSTICK ¡ to change

into the Z-enhancer adjusting display

“Z-EH LVL” level. Press the ENT

ward to make an adjustment.

Adjusting range of the balance: L13 to R13

Adjusting range of the fader: front 12 / rear 12

3. Operate the JOYSTICK ¡ upward or down-

ward to adjust the Z-enhancer level.

5. When the adjustment is finished, operate the

JOYSTICK ¡ rightward or leftward to move

the cursor to “MENU”. Then press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

When Z-Enhancer 1 is selected, you can adjust

the bass in the range of ±2.

When Z-Enhancer 2 is selected, you can adjust

the treble in the range of ±2.

When Z-Enhancer 3 is selected, you can adjust

the bass and treble in the range of ±2.

4. When the adjustment is finished, operate the

JOYSTICK ¡ rightward or leftward to move

the cursor to “MENU”.Then press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

Turning on/off the loudness

The loudness effect emphasizes the bass and

treble to create a natural sound tone. When you

are listening to music at a low volume, it is rec-

ommended to use the loudness effect.

This function is enabled only when the panel is

open.

1. Press the A-M button & for 1 second or longer

to select Loudness ON. The “LD” indicator

lights in the display.

2. Press the A-M button & for 1 second or longer

to select Loudness OFF. The “LD” indicator

goes off.

Note:

•

When using a sold separately digital sound processor

(DPH7500z), a feature called auto loudness is selected.

This function is different from the loudness effect. For

further details on the auto loudness feature, refer to the

subsection “Output adjustment of auto loudness,

subwoofer and playback band”.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

Radio Operations

2. Press the right or left side of SEARCH button

2 to automatically seek a station.

FM reception

For enhanced FM performance the

tuner includes signal actuated stereo control, En-

hanced Multi AGC, Impulse noise reduction curcuits

and Multipath noise reduction circuits.

When the right side of SEARCH button 2 is

pressed, the station is sought in the direction

of higher frequencies; if the left side of

SEARCH button 2 is pressed, the station is

sought in the direction of lower frequencies.

Changing the reception area

This unit is initially set to USA frequency intervals

of 10kHz for AM and 200kHz for FM.When using it

outside the USA, the frequency reception range

can be switched to the intervals below.

Manual tuning

There are 2 ways available: Quick tuning and step

tuning.

When you are in the step tuning mode, the fre-

quency changes one step at a time. In quick tun-

ing mode, you can quickly tune the desired fre-

quency.

➜➜Setting the reception area

While pressing DISP button @ , each time you

press and hold the number “6” of the PRESET

buttons # for 2 seconds or longer, the recep-

tion area switches from inside the USA to out-

side the USA or from outside the USA to in-

side the USA.

1. Press the BAND button % and select the de-

sired band. (FM or AM)

If “MANU” is not lit in the display (or when the

panel is closed, if the indicator “SRCH” is lit),

press and hold the BAND button % for 1 sec-

ond or longer. “MANU” appears in the display

(or when the panel is closed, the indicator

“SRCH” goes off) and manual tuning is now

available.

Any station preset memories are lost when the

reception area is changed.

Listening to the radio

1. Press the FUNC button 1 and select the RA-

2. Tune into a station.

DIO mode.

➜➜Quick tuning:

2. Press the BAND button % and select the ra-

dio band. Each time the button is pressed,

the radio reception band changes in the fol-

lowing order:

Press and hold the right or left side of the

SEARCH button 2 for 1 second or longer to

tune in a station.

➜➜Step tuning:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

Press the right or left side of the SEARCH but-

ton 2 to manually tune in a station.

3. Press the right or left side of the SEARCH but-

ton 2 to tune in the desired station.

Recalling a preset station

Tuning

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio sta-

tions in memory. Pressing the corresponding

PRESET buttons # recalls the stored radio fre-

quency automatically.

There are 3 types of tuning mode available, seek

tuning, manual tuning and preset tuning.

Seek tuning

1. Press the BAND button % and select the de-

1. Press the BAND buttons % and select the

sired band. (FM or AM)

desired band. (FM or AM)

If “MANU” is lit in the display (or when the panel

is closed, if the indicator “SRCH” is not lit) press

and hold the BAND button % for 1 second or

longer.“MANU” in the display goes off (or when

the panel is open the indicator “SRCH”

lights)and seek tuning is now available.

2. Press the corresponding PRESET buttons #

to recall the stored station.

Press and hold one of the PRESET buttons #

for 2 seconds or longer to store that station

into preset memory.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operations

Instant station recall (ISR)

Manual memory

1. Press the BAND button % and select the de-

Instant station recall is a special radio preset that

instantly accesses a favorite radio station at a

touch of a button. The ISR function even oper-

ates with the unit in other modes.

sired band. (FM or AM)

2. Select the desired station with seek tuning,

manual tuning, or preset tuning.

➜➜ISR memory

3. Press and hold one of the PRESET buttons

# for 2 seconds or longer to store the cur-

rent station into preset memory.

1. Select the station that you wish to store in ISR

memory.

2. Press and hold ISR button 0 for 2 seconds

Auto store

or longer.

Auto store is a function for storing up to 6 sta-

tions that are automatically tuned in sequentially.

If 6 receivable stations cannot be received, a pre-

viously stored station remains unoverwritten at

the memory position.

➜➜Recalling a station with ISR

In any mode, press ISR button 0 to turn on the

radio function and tune the selected radio sta-

tion. “ISR” appears in the display. Press ISR but-

ton 0 again to return to the previous mode.

1. Press the BAND button % and select the de-

sired band. (FM or AM)

2. Press and hold the PS/AS button 5 for 2 sec-

onds or longer.The stations with good recep-

tion are stored automatically to the preset

channels.

Preset scan

Preset scan receives the stations stored in pre-

set memory in order.This function is useful when

searching for desired station in memory.

1. Press the PS/AS button 5.

2. When the desired station is tuned in, press

the PS/AS button 5 again to continue receiv-

ing that station.

Note:

• Be careful not to press and hold PS/AS button 5

for 2 seconds or longer, otherwise the auto store

function engages and the unit starts storing sta-

tions.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

CD Changer Operations

When the panel is closed:

CD changer functions

1. Display the CD-text title (disc or track).

When an optional CD changer is connected

through the CeNET cable, this unit controls all

CD changer functions.This unit can control a total

of 2 changers (MD and/or CD).

2. Press and hold the BAND button % for 1 sec-

ond or longer. The titles scroll.

When the panel is open:

Press the FUNC button 1 and select the CD

changer mode to start play. If 2 CD changers are

connected, press the FUNC button 1 to select

the CD changer for play.

1. Display the CD-text title (disc & track).

2. Press and hold the TITLE button ( for 1 sec-

ond or longer to scroll the disc title.

3. To scroll the track title, press for 1 second or

longer the TITLE button ( within 30 seconds

after scrolling the disc title.

If “NO MAG” appears in the display, insert the

magazine into the CD changer. “LOADING” ap-

pears in the display while the player loads (checks)

the magazine.

Notes:

If “NO DISC” appears in the display, eject the

magazine and insert discs into each slot. Then,

reinsert the magazine back into the CD changer.

• If the disc title is shorter than 16 characters, the

track titles begin to scroll immediately.

• If the track title is shorter than 16 characters, the

track titles does not scroll.

CAUTION

CD-ROM discs cannot be played in the CD

changer.

Selecting a CD

Each of the DIRECT buttons # corresponds to

a disc loaded into the magazine.

➜➜Selecting a disc from 1 to 6

Pausing play

1. Press the PLAY/PAUSE button 3 to pause

play. “PAUSE” appears in the display.

Press the corresponding DIRECT buttons (1 to

6) # to select the desired disc.

➜ Selecting a disc from 7 to 12 (only when a

12 disc CD changer is used.)

2. To resume play, press the PLAY/PAUSE but-

Press the corresponding DIRECT buttons (7 to

12) # for 1 second or more, then select the

desired disc.

ton 3 again.

Displaying CD titles

This unit can display title data for CD-text CDs

and user titles input with this unit.

Selecting a track

➜➜Track-up

Each time you press and hold the DISP button

@ for 1 second or longer, the title display changes

in the following order.

1. Press the right side of the SEARCH button

2 to move ahead to the beginning of the next

track.

When the panel is closed:

2. Each time you press the right side of the

SEARCH button 2, the track advances ahead

to the beginning of the next track.

User title (disc) ➜ CD-text title (disc) ➜ CD-text

title (track) ➜ User title (disc)...

When the panel is open:

➜➜Track-down

User title (disc) ➜ CD-text title (disc & track) ➜

User title (disc)...

1. Press the left side of the SEARCH button 2

to move back to the beginning of the current

track.

Note:

• If the CD playing is not a CD-text CD or no user

title has been input, “----------” appears in the dis-

play.

2. Press the left side of the SEARCH button 2

twice to move to the beginning of the previ-

ous track.

➜➜Scrolling a CD-text title

When a CD-text title is longer than 16 charac-

ters (8 characters when the panel is closed), you

can scroll the display as follows.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

CD Changer Operations

Repeat play

Fast-forward/Fast-backward

The repeat play continuously plays the current

track. This function continues automatically until

it is cancelled or the mode is changed.

➜➜Fast-forward

Press and hold the right side of the SEARCH

button 2 for 1 second or longer.

1. Press the RPT button 7, to make repeat play

starts. “RPT” lights in the display.

➜➜Fast-backward

Press and hold the left side of the SEARCH but-

ton 2 for 1 second or longer.

2. To cancel repeat play, press the RPT button

7 again.“RPT” goes off from the display and

the unit returns to normal play.

Top function

The top function plays from the first track (track

No. 1) of the disc.

Disc repeat play

After all tracks in the current disc have been

played, the disc repeat play automatically replays

the current disc over from the first track.This func-

tion continues automatically until it is cancelled

or the mode is changed.

➜➜When playing a disc 1 to 6

Press the DIRECT buttons # (1 to 6) with the

same number as the CD playing.

➜➜When playing a disc 7 to 12 (only when a 12

disc CD changer is used.)

1. When you press the RPT button 7 for 1 sec-

ond or longer, disc repeat play starts.“D-RPT”

lights in the display.

Press the DIRECT buttons # (7 to 12) with the

same number as the CD playing for 1 second or

longer.

2. To cancel disc repeat play, press the RPT

button 7 again. “D-RPT” goes off from the

display and the unit returns to normal play

from the track being played.

Scan play

The scan play locates and plays the first 10 sec-

onds of each track on a disc automatically. This

function continues on the disc until it is cancelled

or the mode is changed.

Random play

The random play selects and plays individual

tracks on the disc in no particular order.This func-

tion continues automatically until it is cancelled

or the mode is changed.

The scan play is useful when you want to select a

desired track.

1. Press the SCN button 5 to start scan play.

2. Press the SCN button 5 again to cancel the

1. When you press the RDM button 8, random

play starts. “RDM” lights in the display.

scan play. Current track continues to play.

2. To cancel random play, press the RDM but-

ton 8 again. “RDM” goes off from the dis-

play and the unit returns to normal play.

Disc scan play

The disc scan play locates and plays the first 10

seconds of the first track on each disc in the cur-

rently selected CD changer. This function con-

tinues automatically until it is cancelled or the

mode is changed.

Disc random play

The disc random play selects and plays individual

tracks or discs automatically in no particular or-

der. This function continues automatically until it

is cancelled or the mode is changed.

The disc scan play is useful when you want to se-

lect a desired CD.

1. Press the SCN button 5 for 1 second or

1. When you press the RDM button 8 for 1 sec-

ond or longer, disc random play starts. “D-

RDM” lights in the display.

longer to start disc scan play.

2. Press the SCN button 5 again to cancel disc

scan play. Normal disc play continues on the

current track.

2. To cancel disc random play, press the RDM

button 8 again. “D-RDM” goes off from the

display and the unit returns to normal play

from the track being played.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

MD Changer Operations

Notes:

MD changer functions

• When the disc title is within 16 characters, the title

is scrolled immediately.

• If the track title is shorter than 16 characters, the

track titles does not scroll.

When an optional MD changer is connected

through the CeNET cable, this unit controls all

MD changer functions. This unit can control a

total of 2 changers (MD and/or CD).

Press the FUNC button 1 and select the MD

changer mode to start play. If 2 MD changers

are connected, press the FUNC button 1 to se-

lect the MD changer for play.

Selecting an MD

Each of the DIRECT buttons # corresponds to

an MD loaded into the MD changer.

Press the DIRECT buttons # (1 to 6) and select

the desired MD.

If “NO DISC” appears in the display, load MDs into

the MD changer.

Selecting a track

➜➜Track-up

Pausing play

1. Press the PLAY/PAUSE button 3 to pause

play. “PAUSE” appears in the display.

1. Press the right side of the SEARCH button

2 to move ahead to the beginning of the next

track.

2. To resume play, press the PLAY/PAUSE but-

ton 3 again.

2. Each time you press the right side of the

SEARCH button 2, the track advances ahead

to the beginning of the next track.

Switching disc titles and track

titles

This unit can display disc titles and track titles

already entered on MDs. Titles up to 128 char-

acters long can be displayed by scrolling the

titles.

➜➜Track-down

1. Press the left side of the SEARCH button 2

to move back to the beginning of the current

track.

Titles cannot be entered for MDs with this unit.

2. Press the left side of the SEARCH button 2

twice to move to the beginning of the previ-

ous track.

When the panel is closed:

1. Press the DISP button @ to show the SUB

display.The disc title or track title is displayed.

Fast-forward/Fast-backward

➜➜Fast-forward

2. Each time you press and hold the DISP but-

ton @ for 1 second or longer, the display

toggles between the disc title and the track

title.

Press and hold the right side of he SEARCH but-

ton 2 for 1 second or longer.

When the panel is open:

➜➜Fast-backward

Both disc and track titles are displayed.

Press and hold the left side of he SEARCH but-

ton 2 for 1 second or longer.

Scrolling titles

Top function

The top function plays from the first track (track

No. 1) of the disc.

When a title is longer than 16 characters (or 8

characters if the panel is closed), you can scroll

through it with the following operation.

When the panel is closed:

Press the DIRECT buttons # (1 to 6) with the

same number that the MD playing.

1. Display the MD title (disc or track).

If an MD is not loaded in a slot of the MD changer,

pressing the DIRECT buttons # corresponding

to its disc number is invalid.

2. Press the BAND button % for 1 second or

longer. The display scrolls through the title.

When the panel is open:

1. Press the TITLE button ( for 1 second or

longer to scroll through the disc title.

2. To scroll the track title, press for 1 second or

longer the TITLE button ( within 30 seconds

after scrolling the disc title.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

MD Changer Operations

Random play

Scan play

The scan play locates and plays the first 10 sec-

onds of each track on a disc automatically. This

function continues on the disc until it is cancelled

or the mode is changed.

The random play selects and plays individual

tracks on the disc in no particular order.This func-

tion continues automatically until it is cancelled

or the mode is changed.

The scan play is useful when you want to select a

desired track.

1. When you press the RDM button 8, random

play starts. “RDM” lights in the display.

1. When you press the SCN button 5, scan play

2. To cancel random play, press the RDM but-

ton 8 again. “RDM” goes off from the dis-

play and the unit returns to normal play.

starts.

2. Press the SCN button 5 again to cancel the

play. Current track continues to play.

Disc random play

Disc scan play

The disc random play selects and plays individual

tracks or discs automatically in no particular or-

der. This function continues automatically until it

is cancelled or the mode is changed.

The disc scan play locates and plays the first 10

seconds of the first track on each disc in the cur-

rently selected MD changer. This function con-

tinues automatically until it is cancelled or the

mode is changed.

1. When you press the RDM button 8 for 1 sec-

ond or longer, random play starts. “D-RDM”

lights in the display.

The disc scan play is useful when you want to

select a desired MD.

2. To cancel random play, press the RDM but-

ton 8 again. “D-RDM” goes off from the dis-

play and the unit returns to normal play from

the track being played.

1. When you press the SCN button 5 for 1 sec-

ond or longer, disc scan play starts.

2. To cancel disc scan play, press the SCN but-

ton 5 again. Normal disc play continues on

the current track.

Repeat play

The repeat play continuously plays the current

track. This function continues automatically until

it is cancelled or the mode is changed.

1. When you press the RPT button 7, repeat

play starts. “RPT” lights in the display.

2. To cancel repeat play, press the RPT button

7 again. “RPT” goes off from the display and

the unit returns to normal play.

Disc repeat play

After all the tracks on the current disc have been

played, the disc repeat play automatically replays

the current disc over from the first track.This func-

tion continues automatically until it is cancelled

or the mode is changed.

1. When you press the RPT button 7 for 1 sec-

ond or longer, disc repeat play starts.“D-RPT”

lights in the display.

2. To cancel disc repeat play, press the RPT

button 7 again. “D-RPT” goes off from the

display and the unit returns to normal play

from the track being played.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

TV Operations

press and hold the BAND button % for 1 sec-

ond or longer. “MANU” in the display goes off

(or when the panel is closed, the indicator

“SRCH” lights) and seek tuning is now avail-

able.

TV functions

When an optional TV tuner is connected through

the CeNET cable, this unit controls all TV tuner

functions. To watch TV requires a TV tuner.

2. Press the right or left side of the SEARCH

button 2 to automatically seek a station.

Press the right side of the SEARCH button

2 to automatically tune up the frequency

band to the next available TV station; press

the left side to automatically tune down.

WARNING

For your safety, the driver should not watch

the TV or operate the controls while driv-

ing. Please note that watching and operat-

ing the TV while driving are prohibited by

law in some countries.

Manual tuning

There are 2 ways available: Quick tuning and step

tuning. When you are in the step tuning mode,

the frequency changes one step at a time. In

quick tuning mode, you can quickly tune the de-

sired frequency.

Watching TV

Notes:

• For your safety, this unit has a safety function which

turns off the picture when the car is moving, so

only the audio can be heard.The picture can only

be watched when the car is stopped and the park-

ing break is applied.

1. Press the BAND button % and select the de-

sired band. (TV1 or TV2)

If “MANU” is not lit in the display (or when the

panel is closed, if the indicator “SRCH” is lit),

press and hold the BAND button % for 1 sec-

ond or longer. “MANU” appears in the display

(or when the panel is closed, the indicator

“SRCH” goes off) and manual tuning is now

available.

1. Press the FUNC button 1 and select the TV

mode.

2. Press the BAND button % to select the de-

sired TV band (TV1 or TV2). Each time the

button is pressed, the input selection toggles

between TV1 and TV2.

2. Tune into a station.

➜ Quick tuning:

3. Press the right or left side of the SEARCH

Press and hold the right or left side of the

SEARCH button 2 for 1 second or longer to tune

in a station.

button 2 to tune in the desired TV station.

Watching a video

➜ Step tuning:

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12V video cassette player (VCP) or video cas-

sette recorder (VCR) to the TV tuner input termi-

nal.

Press the right or left side of the SEARCH but-

ton 2 to manually tune in a station.

Note:

• Manual tuning is cancelled if you do not operate

the unit for 7 seconds longer.

1. Press the RDM button 8 and select the VTR.

2. To return to the TV broadcast, press the RDM

Recalling a preset station

button 8 again.

A total of 12 TV stations can be stored (6-TV1

and 6-TV2). This allows you to select your favor-

iteTV stations and store them in memory for later

recall.

Tuning

There are 3 types of tuning mode available, seek

tuning, manual tuning and preset tuning.

1. Press the BAND button % and select the de-

sired TV band. (TV1 or TV2)

Seek tuning

1. Press the BAND button % and select the de-

2. To recall a stored TV station, press the de-

sired PRESET buttons # to select that sta-

tion.

sired TV band (TV1 or TV2).

Press and hold one of the PRESET buttons #

for 2 seconds or longer to store the current sta-

tion into the preset memory.

If “MANU” is lit in the display (or when the panel

is closed, if the indicator “SRCH” is not lit),

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

TV Operations

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

Setting the TV diver

This function is enabled only when the panel is

open.

Normally use the TV diver with the “ON” position.

2. Press and hold one of the PRESET buttons

# for 2 seconds or longer to store the cur-

rent station to that preset memory.

You can change the reception setting for the TV

antenna connected to the TV tuner.

1. Press the ADJ button * to switch to the ad-

justment selection display.

Auto store

Auto store selects 6TV stations automatically and

stores each one into a preset memory.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “TV DIVER”.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select “ON” or “OFF” and press the

ENT at the center of the JOYSTICK ¡ to set

the selected reception setting.

If there are not 6 stations with good reception,

stations previously stored in memory remain and

only the strong stations are stored into memory.

1. Press the BAND button % and select the de-

➜ ON:

sired TV band. (TV1 or TV2)

Sets reception emphasizing the visual.

➜ OFF:

2. Press and hold the AS/PS button 5 for 2 sec-

onds or longer.The stations with good recep-

tion are automatically stored to the PRESET

buttons # .

Sets the diver setting to OFF.

4. Press the ADJ button * return to the previ-

ous mode.

Preset scan

Preset scan allows the user to view each preset

position before it automatically advances to the

next preset. This function is useful for searching

for desired TV station in memory.

1. Press the AS/PS button 5.

2. When the desired channel is received, press

the AS/PS button 5 again.

Switching the VTR system between

NTSC and PAL

This function is enabled only when the panel is

open.

Switch to the VTR mode you use.

1. Press the ADJ button * to switch to the ad-

justment selection display.

2. Operate the JOYSTICK ¡ upward or down-

ward to move the cursor to “VTR N/P”.

3. Operate the JOYSTICK ¡ rightward or left-

ward to move the cursor to select “NTSC” or

“PAL”.

4. Press the ENT at the center of the JOYSTICK

¡ to set the selected VTR mode.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

TV Operations

Changing over TV display size

This function is available only when the panel is

open.

Adjusting the brightness and tone

of color

Notes:

Press the WIDE button 7 to change over the

TV display size. Each time you press the

WIDE button 7, the TV display size changes

in the following order:

• This operation is available only when the car is

stopped and the parking brake is applied.

• This function is not available when the display is

stored.

• The HUE setting can be adjusted only when the

NTSC mode is selected.

“NORMAL” ➜ “WIDE” ➜ “F.WIDE” ➜ “CIN-

EMA” ➜ “NORMAL”

1. Press the ADJ button * to switch to the ad-

➜ “NORMAL”: (normal display)

justment selection display.

There is a black area at both right and left

ends of a display. In case of normal TV broad-

casting (4:3), the image can be shown with-

out being cut or deformed.

2. Operate the JOYSTICK ¡ upward or down-

ward to select the option “MONI ADJ” (by

moving the cursor).

3. Press the ENT at the center of the JOYSTICK

➜ “WIDE”: (wide mode)

¡.

The image at right and left ends in a display

elongates horizontally.

4. Operate the JOYSTICK ¡ rightward or left-

ward to select “BRIGHT”,“COLOR” or “HUE”

(by moving the cursor).

➜ “F. WIDE”: (full wide mode)

The whole image elongates horizontally.

➜ “CINEMA”: (cinema mode)

➜ “BRIGHT“:

Adjust the brightness of the display.

➜ “COLOR“:

The image at both top and bottom in a dis-

play disappears.

Adjusts the color saturation.

➜ “HUE“:

Notes:

• When a normal 4:3 size image, not being a wide

one, is viewed by displaying it fully on a wide TV

display in a wide mode or a full-wide mode, a part

of the peripheral image will be lacking or deformed.

In deference to the intention of producer, an origi-

nal image can be viewed in a normal mode.

Adjusts the tone of color (red is emphasized

or green is emphasized.)

5. Operate the JOYSTICK ¡ upward or down-

ward to adjust a level.

6. When the adjustment is made, operate the

JOYSTICK ¡ rightward or leftward to move

the cursor to “MENU”.Then press the ENT at

the center of the JOYSTICK ¡ to return to

the adjustment selection display.

• During superimposed display, it becomes a full-

wide mode.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Vision Camera

Operation of External Visual

Devices (VISUAL Mode)

Monitoring the rear vision camera

The rear vision camera can be connected to this

unit. For the power supply of the camera, mount

the power box sold separately (CAA-147).

External visual devices such as DVD and VTR

devices can be connected to the DIN 8-pin ter-

minal, and the image and sound can then be

played using VISUAL mode.

Notes:

• This function is not available when the display is

stored.

Notes:

• While driving, the image of the VISUAL Mode is

turned OFF and only sound is played.

• Images can only be played when the vehicle is

stationary with the parking brake ON.

1. With the panel open, push VISUAL button )

to switch from radio, TV, CD/MD changer

mode to VISUAL mode.

2. To exit VISUAL Mode and return to the previ-

ous mode, press VISUAL button ) again.

The image format played in VISUAL mode can

be set to NTSC or PAL format. The setting

method is the same as for the TV. Please refer

to the TV explanation.

In VISUAL mode, the picture quality can be ad-

justed. The setting method is the same as for

the TV. Please refer to the TV explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

Other Functions

4. Operate the JOYSTICK ¡ upward or down-

ward, rightward or leftward and move the cur-

sor to the character to be entered. Press the

ENT at the center of the JOYSTICK ¡.

Always turning on the button

illumination on the operation panel

Note:

• The following operation is enabled when the panel

When the cursor is at the lower/upper limit of

the display, operate the JOYSTICK ¡ upward

or downward, the character string of the follow-

ing line appears.

is open.

The button illumination on the operation panel

when the display is turned upward, can be

switched between “ON” and “OFF”.

“-->” :

“<--” :

“--I--” :

Space

Backspace

Centering

➜ “ON”: Button illumination on the operation

panel turns on for 5 seconds;

➜ “OFF” : Button illumination is always on when

the power is turned on;

5. Repeat the step 4 to enter the complete title.

1. When the panel is open, press the ADJ button

6. Press and hold the ENT at the center of the

JOYSTICK ¡ for 2 seconds or longer to store

the title into memory and cancel title input mode.

£ to show the adjustment selection display.

2. Operate the JOYSTICK ¡ upward or down-

ward and select “AUTO ILL” to show “ON”

and “OFF” in the menu bar.

Title list play

3. Operate the JOYSTICK ¡ rightward or left-

ward to select either position to be set and

press the ENT at the center of the JOYSTICK

¡ for setting.

You can display a list of titles, then select the disc

or broadcast station to listen to from that list.

You can not display a title list with the unit in Seek,

Preset Scan, Auto store (Tuner or TV), Scan, Re-

peat or Random (CD changer or MD changer)

mode. Cancel those operation modes before to

display a title list.

4. Press the ADJ button * to return to the pre-

vious mode.

To set “ON” again, switch “OFF” to “ON” manually.

1. With the unit in radio, CD/MD changer, TV,

press the TITLE button (. A title list is dis-

played. The following functions can be car-

ried out in a title list display.

Entering titles

Titles up to 10 characters long can be stored in

memory and displayed.The numbers of titles that

can be entered for each mode are as follows.

➜ TUNER: A title of a channel stored in the

presets 1 to 6 or a channel number is dis-

played.

Mode

Number of titles

30 titles

➜ CD/MD changer: DISC titles for discs 1 to

6 are displayed (By changing over a display

page in case of 12-CD changer, disc 7 to 12

can be displayed). When there is not any disc

in a changer, ”---------” is displayed.

Radio mode

TV mode

15 titles

CD changer mode

CDC655z connected

CDC655Tz connected

CDC1255z connected

Number of titles

60 titles

➜ TV: A title of a channel stored in the pre-

sets 1 to 6 or a channel number is displayed.

100 titles

50 titles

2. Operate the JOYSTICK ¡ upward or down-

ward to select one of the items 1 to 6. Press

ENT at the center of the JOYSTICK ¡ to re-

produce the selected broadcast station or

disc.

You cannot enter titles with the unit in Seek, Pre-

set Scan, Auto store (TUNER, TV), Scan, Repeat

or Random (CD changer, MD changer) mode.Can-

cel each of those operations before entering titles.

In case of 12-CD changer, move the cursor to

disc 6 and then operate the JOYSTICK ¡

downward to change over to a list display of

discs 7 to 12.

1. Press the FUNC button 1 to select the mode

you want to enter a title (CD changer or TV).

2. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

enter the title.

3. Press the TITLE button ( again to return to

the STANDARD display.

3. If you press and hold the TITLE button ( for

1 second or longer, the display switches to

the title input mode display.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

Other Functions

Clock Adjustment

1. Press the ADJ button * to display the ad-

justment selection display.

2. Move the JOYSTICK ¡ up or down to select

CLOCK, then press ENT at the center of the

JOYSTICK ¡ to display the clock adjustment

display.

3. Move the JOYSTICK ¡ left or right to select

HR or MIN, then move the JOYSTICK ¡ up

or down to adjust the time.

The time is displayed in 12-hour format.

4. Pressing ENT at the center of the JOYSTICK

¡ when the cursor is above HR or MIN saves

the adjusted value in memory and simulta-

neously returns the display to the previous

display (adjustment selection display).

To cancel clock adjustment before completion,

use the JOYSTICK ¡ to move the cursor to

MENU, then press ENT at the center of the

JOYSTICK ¡.

Triggered audio mute for cellular

telepones

This unit requires special wiring to mute the au-

dio signal automatically when a cellular telephone

rings in the car.

This function is not compatible wiht all cellular

telepones Contact your local authorized Clarion

dealer for information on proper installation and

compatibility.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

DSP operations

DSP control function

If the DSP (DPH7500z), sold separately, is con-

nected to this unit using the CeNET cable, all

the functions of the DSP can be controlled.

Operations common to each mode

Output adjustment of auto loudness,

subwoofer and playback band

1. Press the ADJ button * to switch to the ad-

When the DSP is connected, an external ampli-

fier is required.

DSP control can all be operated only when the

panel is open.

justment selection display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “SOUND” and press the ENT

at the center of the JOYSTICK ¡ to change

into the Sound adjustment display. In the

Sound adjustment display “A.LD LEVEL”,

“W.OUT”, “W.LPF”, “HPF”, “T.TONE” are

listed.

DSP functions

There are 2 modes available in DPH7500z, easy

mode and professional mode. Choose one of them

and adjust the sound field and the sound quality.

➜ Functions common to each mode:

Such as auto loudness, subwoofer etc.

➜ Easy mode:

Operate the JOYSTICK ¡ rightward or left-

ward to select an item to be adjusted.

3. To make an adjustment on:

Adjustment using the graphic equalizer function

and the DSP function.

➜ Auto loudness adjustment

Operate the JOYSTICK ¡ upward or down-

ward to adjust an auto loudness level (0 to

10).

➜ Professional mode:

Adjustment using the space equalizer function

and the parametric equalizer function.

➜ Woofer out adjustment

When the easy mode is selected, adjustment for

the professional mode cannot be made. On the

contrary, when the professional mode is selected,

adjustment for the easy mode cannot be made.

For details on functions of each mode, refer to the

owner’s manual supplied with the DPH7500z.

Hereafter the graphic equalizer is referred to as a

G.EQ, the space equalizer referred to as S.EQ

and the parametric equalizer referred to as P.EQ.

Select woofer output out of “STEREO”,

“MONO”, or “OFF”.

Operate the JOYSTICK ¡ upward or down-

ward to select a desired item, and then press

the ENT at the center of the JOYSTICK ¡ to

set it.

➜ Woofer LPF adjustment

Select woofer LPF slope out of “50Hz”,

“80Hz”, “120Hz”.

Operate the JOYSTICK ¡ upward or down-

ward to select a desired item, and then press

the ENT at the center of the JOYSTICK ¡ to

set it.

➜ HPF adjustment

Select HPF slope out of “50Hz”, “80Hz”,

“120Hz”, or “OFF”.

Operate the JOYSTICK ¡ upward or down-

ward to select a desired item, and then press

the ENT at the center of the JOYSTICK ¡ to

set it.

➜ Test Tone Output

Select Test Tone Output

Operate the JOYSTICK ¡ upward or down-

ward to select a desired item, and then press

the ENT at the center of the JOYSTICK ¡ to

produce a test tone.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

DSP operations

4. After adjustment (setting), operate the JOY-

STICK ¡ rightward or leftward to move the

cursor to “MENU” and press the ENT at the

center of the JOYSTICK ¡ to return to the

adjustment selection display.

Easy mode/Setting the listening

position

Selection of listening position

1. Press the A-M button & to show the AUDIO-

5. Press the ADJ button * again to return to

the STANDARD display.

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “POSITION”. “SELECT" and

“DETAIL” are displayed in the menu bar.

Selecting the easy mode or the

professional mode

The factory default setting is “EASY”.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select “SELECT”, and press the ENT

at the center of the JOYSTICK ¡ to show

Position selecting display.

1. Press the ADJ button

to switch to the ad-

justment selection display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “DSP/EQ”. “EASY” and “PRO”

items are displayed in the menu bar.

4. Operate the JOYSTICK ¡ upward or down-

ward and press the ENT at the center of the

JOYSTICK ¡ to select a desired position.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select a desired mode and press the

ENT at the center of the JOYSTICK ¡ to set

the mode thus selected.

5. Operate the JOYSTICK ¡ rightward or left-

ward to move the cursor to “MENU”, and press

the ENT at the center of the JOYSTICK ¡ to

return to the AUDIO-MODE display.

4. After setting, press the ADJ button * again

to return to the STANDARD display.

Detail adjustment of listening

position

1. Press the A-M button & to show the AUDIO-

Woofer level adjustment

You can adjust an output sound level of

subwoofer.

MODE display.

1. Press the A-M button & to show the AUDIO-

2. Operate the JOYSTICK ¡ upward or down-

ward to select “POSITION”. “SELECT" and

“DETAIL” are displayed in the menu bar.

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “W-VOL” and press the ENT

at the center of the JOYSTICK ¡ to show

the woofer level adjusting display.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select “DETAIL”, and press the ENT

at the center of the JOYSTICK ¡ to show

Position Detail adjusting display.

3. Operate the JOYSTICK ¡ upward or down-

ward to adjust the level (0 to 14).

4. Operate the JOYSTICK ¡ rightward or left-

ward to select “BALANCE” or “FADER”.

4. After adjustment, operate the JOYSTICK ¡

rightward or leftward to select “MENU” and

press the ENT at the center of the JOYSTICK ¡

return to the AUDIO-MODE display.

5. Operate the JOYSTICK ¡ upward or down-

ward to make an adjustment.

6. Operate the JOYSTICK ¡ rightward or left-

ward to move the cursor to “MENU”, and press

the ENT at the center of the JOYSTICK ¡ to

return to the AUDIO-MODE display.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

DSP operations

By pressing the BAND button % in BASIC pat-

tern selecting display or USER pattern selec-

tion/memory display you can switch between

the two patterns, BASIC and USER.

Easy mode/G.EQ operations

Note:

• The adjustment made in easy mode is not reflected

in the adjustment in professional mode. Respec-

tively, the adjustment made in professional mode

is not reflected in the adjustment in easy mode.

5. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU”, and press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

G.EQ effect ON/OFF

Setting and storing G.EQ Proper-

ties/Memory into USER Pattern

1. Repeat the steps 1 to 3 of the previous proce-

dure (Calling G.EQ BASIC Pattern/USER Pat-

tern) to show BASIC pattern selecting display

or USER pattern selection/memory display.

The factory default setting is “ON”.

1. Press the A-M button & to show the AUDIO-

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “EQ ON/OFF”. “ON” and “OFF”

items are displayed in the menu bar.

2. Operate the JOYSTICK ¡ leftward and right-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show the

G.EQ adjusting display.

3. Operate the JOYSTICK ¡ rightward or leftward

to select “ON” or “OFF” and press the ENT at

the center of the JOYSTICK ¡ to set it.

4. After the setting, press the A-M button &

3. When some frequency to be adjusted is se-

lected by operating the JOYSTICK ¡ right-

ward or leftward in the G.EQ adjusting display,

a gain setting value at the selected frequency

is displayed.

again to return to the STANDARD display.

Note:

• If the G.EQ effect is set to OFF, the adjustment

made in “G.EQ operations” is not reflected in the

music source.

4. Operate the JOYSTICK ¡ upward or down-

ward to adjust the G.EQ GAIN.

Calling G.EQ BASIC Pattern/USER

Pattern

1. Press the A-M button & to show the AUDIO-

By pressing the PRESET buttons # once in the

G.EQ adjusting display, the setting value for cur-

rently stored USER pattern is obtained.

MODE display.

5. After making adjustments to a desired pattern

by repeating the operations of items 3 and 4,

operate the JOYSTICK ¡ rightward or left-

ward to move the cursor to “RTN”, and press

the ENT at the center of the JOYSTICK ¡ to

change over to the BASIC/USER pattern se-

lection/memory display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “EQ MODE”. “BASIC” and

“USER” items are displayed in the menu bar.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select the item thus called, and press

the ENT at the center of the JOYSTICK ¡ to

show BASIC pattern selecting display or

USER pattern selection/memory display.

6. Operate the JOYSTICK ¡ rightward or leftward

in the BASIC/USER pattern selection/memory

display to select USER memory P1 to P6 to be

stored, and press the ENT at the center of the

JOYSTICK ¡ for 2 seconds or longer to store

the adjusted G.EQ pattern to the USER memory.

4. In the Pattern selecting display, operate the

JOYSTICK ¡ rightward or leftward to select

P1 to P6, and press the ENT at the center of

the JOYSTICK ¡ to call corresponding G.EQ

pattern. In this display, pressing the No. but-

ton in correspondence to the PRESET button

# can also call the G.EQ pattern.

By pressing the PRESET button # 1 to 6 for 2

seconds or longer in the G.EQ adjusting dis-

play, the G.EQ pattern can be stored in the

USER memory.

After selecting P1 to P6 by the JOYSTICK ¡,

press ENT at the center of the JOYSTICK ¡

for 2 seconds or longer to copy the selected

pattern to the USER pattern.

Operate the JOYSTICK ¡ rightward or leftward

to select “EDIT”, and press the ENT at the cen-

ter of the JOYSTICK ¡ to show G.EQ adjust-

ing display, in which the properties of currently

selected pattern can be adjusted.

7. To set a title of the stored USER pattern, op-

erate the JOYSTICK ¡ rightward or leftward

to select “TITLE” and press the ENT at the

center of the JOYSTICK ¡ to change into the

Title Input display.

For title inputting method, refer to the section

“Entering titles”.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

DSP operations

By pressing the BAND button % in BASIC pat-

tern selecting display or USER pattern selec-

tion/memory display you can switch between

the two patterns, BASIC and USER.

8. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU” and press the ENT at

the center of the JOYSTICK ¡ to change into

the AUDIO-MODE display.

5. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU”, and press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

Easy mode/DSP operations

DSP effect ON/OFF

Setting and storing DSP Properties/

Memory into USER Pattern

1. Repeat the steps 1 to 3 of the previous proce-

dure (Calling DSP BASIC Pattern/USER Pat-

tern) to show BASIC pattern selecting display

or USER pattern selection/memory display.

The factory default setting is “ON”.

1. Press the A-M button & to show the AUDIO-

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “DSP ON/OFF”. “ON” and

“OFF” items are displayed in the menu bar.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show the

DSP adjusting display.

3. Operate the JOYSTICK ¡ rightward and left-

ward to select “ON” or “OFF” and press the

ENT at the center of the JOYSTICK ¡ to set

it.

3. Select an item to be adjusted by operating the

JOYSTICK ¡ rightward or leftward in the DSP

adjusting display.

Note:

• If the DSP effect is set to OFF, the adjustment

made in “DSP operations” is not reflected in the

music source.

“EF” ➜ EFFECT

“DL” ➜ DELAY

Calling DSP BASIC Pattern/USER

Pattern

1. Press the A-M button & to show the AUDIO-

“R.M” ➜ REAR MIX

“R.S” ➜ ROOM SIZE

“LV” ➜ LIVENESS

“R.T” ➜➜REVERB TIME

“HI” ➜➜HIGH

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “DSP MODE”. “BASIC 1”, “BA-

SIC 2” and “USER” items are displayed in the

menu bar.

4. Operate the JOYSTICK ¡ upward or down-

ward to set each adjusting value.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select the item thus called, and press

the ENT at the center of the JOYSTICK ¡ to

show BASIC pattern selecting display or

USER pattern selection/memory display.

By pressing the PRESET buttons # once in

the DSP adjusting display, the setting value for

currently stored USER pattern is obtained.

5. After making adjustments to a desired pattern

by repeating the operations of items 3 and 4,

operate the JOYSTICK ¡ rightward or left-

ward to move the cursor to “RTN”, and press

the ENT at the center of the JOYSTICK ¡ to

change over to the BASIC/USER pattern se-

lection/memory display.

4. In the pattern selecting display, operate the

JOYSTICK ¡ rightward or leftward to select

P1 to P6, and press the ENT at the center of

the JOYSTICK ¡ to call corresponding DSP

mode. In this display, pressing the No. button

in correspondence to the PRESET buttons #

can also call the DSP mode.

6. Operate the JOYSTICK ¡ rightward or left-

ward in the BASIC/USER pattern selection/

memory display to select USER memory P1 to

P6 to be stored, and press the ENT at the cen-

ter of the JOYSTICK ¡ for 2 seconds or longer

to store the adjusted DSP pattern to the USER

memory.

After selecting P1 to P6 by operating the JOY-

STICK ¡, press the ENT at the center of the

JOYSTICK ¡ for 2 seconds or longer to copy

the selected pattern to the USER pattern.

Operate the JOYSTICK ¡ rightward or left-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show DSP

adjusting display, in which the properties of cur-

rently selected pattern can be adjusted.

By pressing the PRESET buttons # 1 to 6 for 2

seconds or longer in the DSP adjusting display, the

DSP pattern can be stored in the USER memory.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

DSP operations

7. To set a title of the stored USER pattern, op-

erate the JOYSTICK ¡ rightward or leftward

to select “TITLE” and press the ENT at the

center of the JOYSTICK ¡ to change into the

Title Input display.

the JOYSTICK ¡ to call corresponding S.EQ

pattern. In this display, pressing the No. but-

ton in correspondence to the PRESET buttons

# can also call the S.EQ pattern.

After selecting P1 to P6 by operating the JOY-

STICK ¡ rightward or leftward, press the ENT

at the center of the JOYSTICK ¡ for 2 sec-

onds or longer to copy the selected pattern to

the USER pattern.

Operate the JOYSTICK ¡ rightward or leftward

to select “EDIT”, and press the ENT at the cen-

ter of the JOYSTICK ¡ to show the S.EQ ad-

justing display, in which the properties of cur-

rently selected pattern can be adjusted.

For title inputting method, refer to the section

“Entering titles”.

8. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU” and press the ENT at

the center of the JOYSTICK ¡ to change into

the AUDIO-MODE display.

Professional mode/S.EQ opera-

tions

By pressing the BAND button % in BASIC pat-

tern selecting display or USER pattern selec-

tion/memory display you can switch between

the two patterns, BASIC and USER.

Note:

5. Operate the JOYSTICK ¡ rightward or leftward

to select “MENU”, and press the ENT at the cen-

ter of the JOYSTICK ¡ to return to the AUDIO-

MODE display.

• The adjustment made in professional mode is not

reflected in the adjustment in easy mode. On the

contrary, the adjustment made in easy mode is not

reflected in the adjustment in professional mode.

Setting and storing S.EQ Properties/

Memory into USER Pattern

1. Repeat the steps 1 to 3 of the previous proce-

dure (Calling S.EQ BASIC Pattern/USER Pat-

tern) to show BASIC pattern selecting display

or USER pattern selection/memory display.

S.EQ effect ON/OFF

The factory default setting is “ON”.

1. Press the A-M button & to show the AUDIO-

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “S.EQ ON/OFF”. “ON” and

“OFF” items are displayed in the menu bar.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “S.EQ EDIT”, and press the ENT

at the center of the JOYSTICK ¡ to show the

S.EQ adjusting display.

3. Operate the JOYSTICK ¡ rightward or leftward

to select “ON” or “OFF” and press the ENT at

the center of the JOYSTICK ¡ to set it.

3. Select an item to be adjusted by operating the

JOYSTICK ¡ rightward or leftward in the

S.EQ adjusting display.

Note:

• If the S.EQ effect is set to OFF, the adjustment

made in “S.EQ operations” is not reflected in the

music source.

“DIFF” ➜ DIFFUSE

“C.WD” ➜ CAR WIDTH

“C.LG” ➜ CAR LENGTH

Calling S.EQ BASIC Pattern/USER

Pattern

1. Press the A-M button & to show the AUDIO-

4. Operate the JOYSTICK ¡ upward or down-

ward to set each adjusting value.

By pressing the PRESET buttons # once in the

S.EQ adjusting display, the setting value for cur-

rently stored USER pattern is obtained.

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “S.EQ MODE”. “BASIC” and

“USER” items are displayed in the menu bar.

5. After making adjustments to a desired pattern

by repeating the steps 3 and 4, operate the

JOYSTICK ¡ rightward or leftward to move the

cursor to “RTN”, and press the ENT at the cen-

ter of the JOYSTICK ¡ to change over to the

BASIC/USER pattern selection/memory display.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select the item thus called, and press

the ENT at the center of the JOYSTICK ¡ to

show BASIC pattern selecting display or USER

pattern selection/memory display.

6. Operate the JOYSTICK ¡ rightward or leftward

in the BASIC/USER pattern selection/memory

display to select USER memory P1 to P6 to be

stored, and press the ENT at the center of the

4. In the pattern selecting display, operate the

JOYSTICK ¡ rightward or leftward to select

P1 to P6, and press the ENT at the center of

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

DSP operations

JOYSTICK ¡ for 2 seconds or longer to store

the adjusted S.EQ pattern to the USER memory.

P1 to P6, and press the ENT at the center of

the JOYSTICK ¡ to call corresponding P.EQ

pattern. In this display, pressing the No. but-

ton in correspondence to the PRESET buttons

# can also call the P.EQ pattern.

By pressing the PRESET buttons # 1 to 6 for

2 seconds or longer in the S.EQ adjusting dis-

play, the S.EQ pattern can be stored in the

USER memory.

After selecting P1 to P6 by operating the JOY-

STICK ¡, press the ENT at the center of the

JOYSTICK ¡ for 2 seconds or longer to copy

the selected pattern to the USER pattern.

Operate the JOYSTICK ¡ rightward or left-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show P.EQ

adjusting display, in which the properties of

currently selected pattern can be adjusted.

By pressing the BAND button % in BASIC pat-

tern selecting display or USER pattern selec-

tion/memory display you can switch between

the two patterns, BASIC and USER.

7. To set a title of the stored USER pattern, op-

erate the JOYSTICK ¡ rightward or leftward

to select “TITLE” and press the ENT at the

center of the JOYSTICK ¡ to change into the

Title Input display.

For title inputting method, refer to the section

“Entering titles”.

8. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU” and press the ENT at

the center of the JOYSTICK ¡ to change into

the AUDIO-MODE display.

5. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU”, and press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

Professional mode/P.EQ opera-

tions

Setting and storing P.EQ Properties/

Memory into USER Pattern

1. In the Basic adjustment display or in the User

setting display, press the A-M button & to

show the AUDIO-MODE display.

P.EQ effect ON/OFF

The factory default setting is “ON”.

1. Press the A-M button & to show the AUDIO-

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “P.EQ ON/OFF”, “ON” and

“OFF” items are displayed in the menu bar.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show the

P.EQ adjusting display.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select “ON” or “OFF” and press the

ENT at the center of the JOYSTICK ¡ to set

it.

3. Select an item to be adjusted by operating

the JOYSTICK ¡ rightward or leftward in the

P.EQ adjusting display.

Note:

4. Operate the JOYSTICK ¡ upward or down-

• If the P.EQ effect is set to OFF, the adjustment

made in “P.EQ operations” is not reflected in the

music source.

ward to set each adjusting value.

By pressing the PRESET buttons # once in

the P.EQ adjusting display, the setting value for

currently stored USER pattern is obtained.

Calling P.EQ BASIC Pattern/USER

Pattern

1. Press the A-M button & to show the AUDIO-

5. After making adjustments to a desired pat-

tern by repeating the operations of items 3

and 4, operate the JOYSTICK ¡ rightward

or leftward to move the cursor to “RTN”, and

press the ENT at the center of the JOYSTICK ¡

to change over to the BASIC/USER pat-

tern selection/memory display.

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “P.EQ MODE”. “BASIC” and

“USER” items are displayed in the menu bar.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select the item thus called, and press

the ENT at the center of the JOYSTICK ¡ to

show BASIC pattern selecting display or

USER pattern selection/memory display.

6. Operate the JOYSTICK ¡ rightward or left-

ward in the BASIC/USER pattern selection/

memory display to select USER memory P1

to P6 to be stored, and press the ENT at the

center of the JOYSTICK ¡ for 2 seconds or

longer to store the adjusted P.EQ pattern to

the USER memory.

4. In the pattern selecting display, operate the

JOYSTICK ¡ rightward or leftward to select

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

DSP operations

By pressing the PRESET buttons # 1 to 6 for

2 seconds or longer in the P.EQ adjusting dis-

play, the P.EQ pattern can be stored in the

USER memory.

7. To set a title of the stored USER pattern, op-

erate the JOYSTICK ¡ rightward or leftward

to select “TITLE” and press the ENT at the

center of the JOYSTICK ¡ to change into the

Title Input display.

For title inputting method, refer to the section

“Entering titles”.

8. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU” and press the ENT at

the center of the JOYSTICK ¡ to change into

the AUDIO-MODE display.

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

9. IN CASE OF DIFFICULTY

Problem

Cause

Measure

Replace with a fuse of the same amperage. If the

fuse blows again, consult your store of purchase.

Power does not

turn on.

Fuse is blown.

(No sound is

produced.)

Consult your store of purchase.

Incorrect wiring.

Turn off the power, then press the RELEASE lever

6 and remove the DCP.

Press the RESET button for about 2 seconds with

a thin rod.

Nothing happens The microprocessor has

when buttons are malfunctioned due to noise,

pressed.

etc.

Display is not

accurate.

Wipe the dirt off with a soft cloth moistened with

cleaning alcohol.

DCP or main unit connectors

are dirty.

The remote controller does not work unless the

display is open.

The remote

controller does

not work.

The display is not open.

When direct rays of the sun fall on the light-

receptive part of the remote controller, it may not

work.

Direct rays of the sun fall on

the light-receptive part of the

remote controller.

Check the batteries of the remote controller unit.

The batteries of the remote

controller unit are dead or

there is no battery in the

remote controller unit.

Check that the parking brake is applied.

Adjust the brightness properly.

The image is not The parking brake is not

displayed.

pulled.

The display is

dark.

The brightness control is too

low.

The temperature inside the vehicle may be 0˚C or

less. Set to an appropriate temperature (25˚C or

so) and check it again.

The operating condition is

not good.

The display is made dark at night to prevent the

glare (When the headlight of the vehicle is lit in the

daytime, the display gets dark).

The headlight of the vehicle

is lit.

Check that COL and HUE are adjusted properly.

The color of the

The color is not adjusted

display is light or adequately.

a shade of color

is not good.

Set the NTSC/PAL properly according to the VTR.

When the VTR is Improper NTSC/PAL setting

connected, the

image is

disturbed.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

Problem

Cause

Measure

When the TV

tuner is con-

nected, the image

gets unclear.

Bad receiving condition

A radio wave may not reach sufficiently due to

obstruction of mountains or buildings. Check it again

at a place where a radio wave can be received

properly.

The TV tuner has Bad receiving condition

a double or triple

image.

It may be under the influence of radio wave reflected

by mountains or buildings. Check it again after

changing place or direction.

The TV tuner has Presence of jamming

spots or stripes in

the image.

It may be under the influence from automobiles,

streetcar, power cable, neon sign, and so forth.

Check it again after changing place.

There are red,

green, and blue

points in the

display.

This is not a failure, but a phenomenon peculiar to a

liquid crystal panel (The LCD panel is produced

according to technology with very high precision.

Note that, though there are effective pixels of 99.99%

or more, pixel missing or normally lit pixels account

for 0.01%).

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.Take the measures described to eliminate

the problem.

Cause

Error Display

ERROR 2

Measure

A CD is caught inside the CD deck and is

not ejected.

This is a failure of CD deck’s mechanism

and consult your store of purchase.

ERROR 3

ERROR 6

ERROR 2

ERROR 3

ERROR 6

ERROR H

A CD cannot be played due to scratches,

etc.

Replace with a non-scratched,

non-warped-disc.

A CD is loaded upside-down inside the CD Eject the disc then reload it properly.

deck and does not play.

A CD inside the CD changer is not loaded. This is a failure of CD changer’s mecha-

nism and consult your store of purchase.

A CD inside the CD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-warped-

disc.

A CD inside the CD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when the temperature in the

MD changer is too high and playback has

been stopped automatically.

Lower the surrounding temperature and

wait for a while to cool off MD changer.

ERROR 2

ERROR 3

ERROR 6

An MD inside the MD changer is not

loaded.

This is a failure of MD changer’s mecha-

nism and consult your store of purchase.

An MD inside the MD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-warped-

disc.

An MD inside the MD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when a non-recorded MD is

loaded in the MD changer.

Load a pre-recorded MD in the MD

changer.

If an error display other than the ones described above appears, press the RESET button. If the

problem persists, turn off the power and consult your store of purchase.

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

11. SPECIFICATIONS

Drive method: TFT (thin-film transistor) active

matrix driving

Pixels:

280,800 (1200 × 234)

FM Tuner

Frequency Range:

87.9 MHz to 107.9 MHz

Usable Sensitivity:

11 dBf

General

Power source voltage:

50dB Quieting Sensitivity:

17 dBf

14.4 V DC (10.8 to 15.6 V allowable)

Ground:

Alternate Channel Selecitivity:

75 dB

Negative

Stereo Separation(1 kHz):

35 dB

Current consumption:

4.0 A (1 W)

Frequency Response(+/-3 dB):

30 Hz to 15 kHz

Auto Antenna Rated Current:

500 mA less

Dimensions of the Main Unit:

178 (W) × 50 (H) × 157 (D)mm

7(W) × 1-15/16(H) × 6-3/16(D)inches

Weight of the Main Unit:

1.7 kg

AM Tuner

Frequency Range:

530 kHz to 1710 kHz

Usable Sensitivity:

25 µV

Dimensions of the Remote Control Unit:

44 (W) × 110 (H) × 27 (D)mm

1-3/4(W) × 4-5/16(H) × 1-1/16(D)inches

Weight of the Remote Control Unit:

30 g (including battery)

Audio Amplifier

Rated power output:

17 W × 4 (20 Hz to 20 kHz, 1%, 4 Ω)

Maximum power output: 40 W × 4 (EIAJ)

Speaker impedance: 4 Ω (4 to 8 Ω)

Input

RGB input:

Video: 0.7 +/- 0.2 Vp-p (input impedance 75

Ω)

Synchronize: 0.3 V (+0.9 / -0.1) Vp-p (input

impedance: 75 Ω)

Video input:

1.0 +/- 0.2 Vp-p (input impedance 75 Ω)

Video input: Mini DIN 8P

LCD Monitor

Screen Size:

Notes:

• Specifications comply with EIAJ Standards.

• Specifications and design are subject to change

without notice for further immprovement.

6.5-inch wide type (142 mm Width × 78 mm

Height)

Display method: Transmission type TN liquid

crystal display

^{VRX6 6 7 1 z}Download from Www.Somanuals.com. All Manuals Search And Download.

VRX6671z

Installation and Wire connection manual

➜➜Contents

BEFORE STARTING..................................................43

PACKAGE CONTENTS...............................................43

GENERAL CAUTIONS................................................44

CAUTIONS ON INSTALLATION.................................44

INSTALLING THE MAIN UNIT....................................45

REMOVINGTHE MAIN UNIT.........................................47

CAUTIONS ON WIRING................................................48

WIRE CONNECTION ................................................49

SAMPLE SYSTEMS...................................................51

BEFORE STARTING

1. This set is exclusively for use in cars with a

negative ground 12 V power supply.

2. Read these instructions carefully.

3. Be sure to disconnect the battery “ ” termi-

nal before starting. This is to prevent short

circuits during installation. (Figure 1)

PACKAGE CONTENTS

1 Main unit

2 Manuals

Cord clamp

Spacer

Special screw

Owner’s manual & Installation manual

6 Universal mounting bracket

7 Remote control unit

8 Battery

Warranty card

3 Power supply lead

Bag for accessories of the main unit (No. 1)

Flat head screw (M5 × 8)............................4

Sems hexagonal bolt (M5 × 8)....................5

Bag for accessories of the main unit (No. 2)

Hook plate..................................................2

(for remote control unit)

9 Outer Escutcheon

0 DCP Case

Download from Www.Somanuals.com. All Manuals Search And Download.^{VRX6 6 7 1 z}

Compaq Network Card MPAC 18 User Manual
Cypress Computer Accessories STK16C88 User Manual
Electro Voice Speaker System SL10 2V User Manual
EverFocus Security Camera ERS 4 User Manual
Extron electronic Network Card HSA 200S Series User Manual
Extron electronic Switch DFX 100 User Manual
Fellowes Paper Shredder Model MS 460Cs User Manual
Flowtron Outdoor Products Insect Control Equipment PV 440 User Manual
Garland Oven MCO 25L User Manual
Global Machinery Company Paper Shredder SHS2400 User Manual