Owner’s manual
ㄏノ弧明書
사용 설명서
CD/MP3/WMA RECEIVER/CeNET CONTROL
CD/MP3/WMA 钡Μ竟/CeNET 北制
CD/MP3/WMA 리시버/CeNET 컨트롤
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1. FEATURES ........................................................................................................................... 2
2. CONTROLS .......................................................................................................................... 3
MAIN UNIT............................................................................................................................. 3
3. BUTTON TERMINOLOGY ................................................................................................... 4
Names of the Buttons and their Functions............................................................................. 4
Major Button Operations when external equipment is connected to this unit ........................ 5
Display Items.......................................................................................................................... 6
LCD Screen............................................................................................................................ 6
4. PRECAUTIONS .................................................................................................................... 7
5. HANDLING COMPACT DISCS ............................................................................................ 8
(
)
6. DCP Detachable Control Panel ........................................................................................ 9
7. REMOTE CONTROL .......................................................................................................... 10
Inserting the Battery............................................................................................................. 10
Functions of Remote Control Unit Buttons............................................................................11
8. OPERATIONS ..................................................................................................................... 12
Basic Operations ................................................................................................................. 12
Radio Mode Operations ....................................................................................................... 14
CD/MP3/WMA Mode Operations ......................................................................................... 16
Operations Common to Each Mode..................................................................................... 21
9. OPERATIONS OF ACCESSORIES .................................................................................... 24
CD Changer Operations ...................................................................................................... 24
TV Operations ..................................................................................................................... 25
10. TROUBLESHOOTING ........................................................................................................ 27
11. ERROR DISPLAYS ............................................................................................................ 29
12. SPECIFICATIONS .............................................................................................................. 30
1. FEATURES
Full dot display & Flip-down console
MP3 and WMA compatible with ID3-TAG display
“Z-ENHANCER” sound customization & “MAGNA BASS EX” dynamic bass enhancement
Be sure to unfold and read the next page.
叫叭ゲ甶秨並綷弄下頁。
반드시 다음 페이지를 펴서 읽으십시오.
DXZ466MP
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2. CONTROLS / 北制 / 제어부
MAIN UNIT / 主诀 / 메인유닛
With the FLIP DOWN PANEL opened / 讽 FLIP DOWN PANEL (陆秨面狾)砆
ゴ秨時 / 플립다운 패널이 열린 상태
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
猔種: 綷弄各彻時叫叭ゲ甶秨此頁並綷弄玡面的瓜。
주: 반드시 이 페이지를 펴서 각 장을 읽을 때 앞면 도표를 참고하십시오.
DXZ466MP
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3. BUTTON TERMINOLOGY
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 3.
Names of the Buttons and their Functions
[
]
[
]
OPEN button
BND button
[
]
• Deeply push in OPEN button to unlock the flip
down panel.
• Switch the band, or seek tuning or manual tuning
while in the radio mode.
• Play a first track while in the CD/MP3/WMA
mode.
Press and hold the button for 1 second or longer
to perform multi-session.
[
]
ADJ button
• Press the button to switch to the ADJ mode.
• Press the button to change the character.
[
]
• Perform preset scan while in the radio mode.
Press and hold the button for 2 seconds or
longer to perform auto store.
button
[
] [
]
UP , DN buttons
(
)
• Select the Folder. MP3/WMA disc only
• Play or pause a CD while in the CD/MP3/WMA
mode.
[
]
RDM button
• Perform random play while in the CD/MP3/WMA
mode.
[
]
SENSOR
• Receiver for remote control unit.
• Operating range: 30° in all directions.
• Press and hold the button for 1 second or longer
to perform folder random play while in the MP3/
WMA mode.
[
]
ISR button
• Recall ISR radio station in memory.
[
]
RPT button
• Repeat play while in the CD/MP3/WMA mode.
• Press and hold for 2 seconds or longer: Store
(
current station into ISR memory radio mode
)
only .
• Press and hold the button for 1 second or longer
to perform folder repeat play while in the MP3/
WMA mode.
[
]
SCN button
[ ]
D button
• Perform scan play for 10 seconds of each track
while in the CD/MP3/WMA mode.
(
• Switch the display indication Main display, Title
)
display .
• Press and hold the button for 1 second or longer
to perform folder scan play while in the MP3/
WMA mode.
• Press and hold the button for 1 second or longer
to enter the display adjustment mode.
[ ]
Z button
[
]
DIRECT buttons
• Press the button to select one of the 3 types
of sound characteristics already stored in
memory.
• Store a station into memory or recall it directly
while in the radio mode.
[
]
SRC button
• Press the button to turn on the power.
[ ]
T button
• Press the button to input a title in the Radio
mode.
• Press and hold the button for 1 second or longer
to turn off the power.
• Press the button to input a title in the CD
mode.
• Switch the operation mode among the radio
mode, etc.
• Press the button to switch the user titles or track
titles, while in the CD/MP3/WMA mode.
[
]
ROTARY knob
• Adjust the volume by turning the knob clockwise
or counterclockwise.
• Use the knob to perform various settings.
• Press the button to scroll the title during the CD-
text play, while in the CD/MP3/WMA mode.
DXZ466MP
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of the Buttons and their Functions
[
A-M button
• Press the button to switch to the audio mode.
bass/treble, balance/fader
• Press and hold for 1 second or longer to turn on
or off the M-B EX mode.
]
[
]
,
lever
• Select a station while in the radio mode or select
a track when listening to a CD. This lever is used
to make various settings.
(
)
• Press the lever upward or downward and hold
in position for 1 second or longer to enter the
fast-forward or fast-backward mode.
[
• Eject a CD when it is loaded into the unit.
]
button
[
CD SLOT
• CD insertion slot.
]
Major Button Operations when external equipment is
connected to this unit
[
]
SCN button
• Perform scan play for 10 seconds of each track.
When the CD/DVD changer is
connected
∗ For details, see the section “CD changer opera-
tions”. For the DVD changer, refer to the Ownerʼs
Manual provided with the DVD changer.
Press and hold the button for 1 second or longer
to perform disc scan play.
[
• Select a track when listening to a disc.
]
,
lever
[
]
• Play or pause a CD, DVD.
button
• Press the lever upward or downward and hold
in position for 1 second or longer to enter the
fast-forward or fast-backward mode.
[ ]
D button
(
• Press the button to display the title Main display,
).
Title display, Clock display
• Press and hold the button for 1 second or longer
to enter the display adjust mode.
When the TV is connected
∗ For details, see the section “TV Operations”.
[
]
button
[ ]
T button
• Perform preset scan while in the TV mode.
• Press the button switches the user titles or track
titles, etc. while in the CD changer mode.
Press and hold the button for 2 seconds or
longer to perform auto store.
• Press and hold the button for 1 second or longer
to input a title in the CD changer mode.
[
• Switch the band.
]
BND button
• Press the button to scroll the title during CD-text
play.
Press and hold the button for 1 second or longer
to switch to the seek tuning or manual mode.
[
• Move the next disc in increasing order.
]
BND button
[
]
DIRECT buttons
• Store a station into memory or recall it directly.
[
• Select the disc.
] [
]
UP , DN buttons
[
• Press the button to switch to the ADJ mode.
]
ADJ button
[
]
RDM button
• Press and hold the button for 1 second or
longer to switch to the TV picture mode or VTR
external picture mode.
• Perform random play. Press and hold the button
for 1 second or longer to perform disc random
play.
(
)
[
]
,
lever
[
]
RPT button
• Select a station.
• Perform repeat play. Press and hold the button
for 1 second or longer to perform disc repeat
play.
DXZ466MP
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Items
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
DXZ466MP
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. PRECAUTIONS
1. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback
may not be possible. If moisture forms on the
disc, wipe it off with a soft cloth. If moisture
forms on the optical parts of the player, do
not use the player for about one hour. The
condensation will disappear naturally allowing
normal operation.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
3. This unit uses a precision mechanism.
Even in the event that trouble arises, never
open the case, disassemble the unit, or
lubricate the rotating parts.
CAUTION
!
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFAC-
TURER WILL VOID THE WARRANTY.
DXZ466MP
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. HANDLING COMPACT DISCS
This unit has been designed specifically for play-
Note on compact discs
Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
back of compact discs bearing the
mark. No other discs can be played.
or
To remove the compact disc from its storage case,
press down on the center of the case and lift the
disc out, holding it carefully by the edges.
Do not use any solvents such as commercially
available cleaners, anti-static spray, or thinner to
clean compact discs.
Always handle the compact disc by the edges.
Never touch the surface.
To remove fingermarks and dust, use a soft cloth,
and wipe in a straight line from the center of the
compact disc to the circumference.
Do not use compact discs that have large scratch-
es, are misshapen, or cracked, etc. Use of such
discs will cause misoperation or damage.
New discs may have some roughness around
the edges. The unit may not work or the sound
may skip if such discs are used. Use a ball-point
pen, etc. to remove roughness from the edge of
the disc.
Do not expose compact discs to direct sunlight or
any heat source.
Note:
•
Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These
may get caught in the internal mechanism and damage the disc.
DXZ466MP
8
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
6. DCP Detachable Control Panel
The control panel can be detached to prevent
theft. When detaching the control panel, store it
CAUTION
!
(
)
in the DCP Detachable Control Panel case to
prevent scratches.
Be sure to close the HOLD FLAP for safety
when removing the DCP.
We recommend taking the DCP with you when
leaving the car.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
Removing the DCP
[
2. Insert the left side of the DCP to attach into
the main unit.
]
1. Press the SRC button for 1 second or longer
to switch off the power.
[
]
2. Press in the OPEN button.
∗ If the flip down panel does not open fully, gently
open it with your hand.
CAUTION
!
• The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it or
subject it to strong shocks.
• If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This result in damage to the DCP. So close
the FLIP DOWN PANEL or remove the DCP
to store into the case.
• The connector connecting the main unit and
the DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, pens, screwdrivers, etc.
3. Pull the DCP toward you and remove it.
4. Close the HOLD FLAP.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
DXZ466MP
9
Download from Www.Somanuals.com. All Manuals Search And Download.
7. REMOTE CONTROL
Inserting the Battery
Notes:
1. Turn over the remote control unit and slide the
cover in the direction indicated by the arrow in
the illustration.
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or
damage to surrounding materials.Always follow these
safety precautions:
• Use only the designated battery.
• When replacing the battery, insert properly, with
(
)
2. Insert the battery CR2025 into the insertion
(+)
guides, with the printed side
upwards.
facing
3. Press the battery in the direction indicated by the
arrow so that it slides into the compartment.
+
/- polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
4. Replace the cover and slide in until it clicks
into place.
DXZ466MP
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of Remote Control Unit Buttons
Mode
Button
CD Changer
DVD Changer
CD/MP3/WMA
TV
Radio
[
]
Press the button to power on.
Press and hold the button for 1 second or longer: Power off.
Switch among radio, CD/MP3/WMA, AUX, CD changer, DVD changer and TV.
SRC
[
]
Switch reception
band.
Play the first track.
Top play.
Move the next disc in Switch reception
increasing order.
BND
band.
(
)
Increase and decrease volume in all modes .
[
]
[
]
,
[
]
[
]
,
Move preset
channels up and
down.
Move tracks up and down.
Press and hold the button for 1 second or
longer: Fast-forward/fast-backward.
Move preset
channels up and
down.
[
]
No function.
Switch between playback and pause.
No function.
[
]
MUTE
Turn mute on and off.
[
]
ISR
Recall ISR radio station in memory.
Press and hold for 2 seconds or longer: Store current station into ISR memory radio mode
(
)
only .
[
]
Switch among main display, title display.
DISP
[
]
Preset scan.
Scan play.
Scan play.
Preset scan.
SCN
Press and hold the
button for 2 seconds
or longer: Auto store.
Press and hold the
button for 2 seconds
or longer: Auto store.
Press and hold the
button for 1 second
or longer to perform
Press and hold the
button for 1 second
or longer: Disc scan
folder scan play while play.
in the MP3/WMA
mode.
[
]
RPT
No function.
Repeat play.
Repeat play.
No function.
Press and hold the
button for 1 second
or longer to perform
folder repeat play
while in the MP3/
WMA mode.
Press and hold the
button for 1 second
or longer: Disc repeat
play.
[
]
No function.
Random play.
Random play.
Switch between TV
and VTR.
RDM
Press and hold the
button for 1 second
or longer to perform
folder random play
while in the MP3/
WMA mode.
Press and hold the
button for 1 second or
longer: Disc random
play.
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
DXZ466MP
11
Download from Www.Somanuals.com. All Manuals Search And Download.
8. OPERATIONS
Note:Be sure to read this chapter referring to the front diagrams of
chapter “2. CONTROLS” on page 3.
Basic Operations
Note:
• If the CD mode is selected when no disc is inserted,
the display shows “NO DISC”.
! CAUTION
Be sure to lower the volume before switching
off the unit power or the ignition key. The
unit remembers its last volume setting. If you
switch the power off with the volume up, when
you switch the power back on, the sudden loud
volume may hurt your hearing and damage
the unit.
Switching the display
[ ]
Press the D button to select the desired display.
[ ]
Each time you press the D button, the display
switches in the following order:
•
Main display
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the carʼs
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
•
Title display
[
1. Press the SRC button.
]
2. The illumination and display on the unit
light up. The unit automatically remem-
bers its last operation mode and will au-
tomatically switch to display that mode.
∗ In the case of a user title, only the top level is
displayed.
[
]
3. Press and hold the SRC button for 1 second
or longer to turn off the power for the unit.
∗ In the case of radio/TV/AUX/DVD changer, the
display cannot be switched to “Title Display”.
Note:
• System check
∗ Once selected, the preferred display becomes the
display default. When a function adjustment such
as volume is made, the screen will momentarily
switch to that functionʼs display, then revert back
to the preferred display several seconds after the
adjustment.
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, the “SYSTEM CHECK” appears in the
display, then the unit returns to the clock display
mode. The system check starts within the unit.
When the system check is complete, press the
∗ If the button operation is performed with the screen
saver function on, the operation display corre-
sponding to the button operation is shown for about
30 seconds and the display returns to the screen
saver display.
[
]
SRC button again.
Selecting a mode
[
]
1. Press the SRC button to change the operation
mode.
For details, refer to the subsection “Turning the
screen saver function on or off” in section “Opera-
tions Common to Each Mode”.
[
]
2. Each time you press the SRC button, the op-
eration mode changes in the following order:
∗ When you have entered a title in a CD/MP3/WMA,
it appears in the title display. If you have not en-
tered a title, “NO TITLE” appears in the title display
instead.
Radio mode CD/MP3/WMA mode CD
changer mode DVD changer mode TV
mode AUX mode
Radio mode...
For information on how to enter a title, refer to the
subsection “Entering titles” in section “Operations
Common to Each Mode”.
∗ External equipment not connected with CeNET
is not displayed.
DXZ466MP
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Adjusting the volume
[
Adjusting the balance
[
]
]
1. Press the front part of the ROTARY knob. The
knob will pop up.
1. Press the A-M button and select “BALANCE
0”.
[
]
[
]
2. Turning the ROTARY knob clockwise
increases the volume; turning it counter-
clockwise decreases the volume.
2. Turning the ROTARY knob clockwise empha-
sizes the sound from the right speaker; turning
it counterclockwise emphasizes the sound from
the left speaker.
(
)
∗ The volume level is from 0 minimum to 33
(
)
maximum .
∗ The factory default setting is “0”.
(
)
Adjustment range: L13 to R13
3. When the adjustment is complete, press the
Audio mode adjustments
[
[
mode is reached.
]
A-M button several times until the function
]
1. Press the A-M button to select the adjustment
mode. The mode switches as follows each time
[
the A-M button is pressed:
]
BASS TREBLE
Previous mode
BALANCE
FADER
Adjusting the fader
[
]
1. Press the A-M button and select “FADER 0”.
[
]
2. Turning the ROTARY knob to adjust the se-
lected audio mode.
[
]
2. Turning the ROTARY knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
(
)
BASS Bass
Adjustment range : 6 to
:
-
+
+
7
(
)
TREBLE Treble
Adjustment range : 6 to
:
∗ The factory default setting is “0”.
(
-
6
)
Adjustment range: F12 to R12
(
)
BALANCE Balance :
Adjustment range : L13 to R13
3. When the adjustment is complete, press the
]
[
mode is reached.
A-M button several times until the function
(
)
FADER Fader
Adjustment range : F12 to R12
:
∗ The display returns to the previous mode 7
seconds after the adjustment.
Setting the Z-Enhancer
This unit are provided with 3 types of sound tone
effects stored in memory. Select the one you
prefer.
Adjusting the bass
∗ The factory default setting is “Z-ENHANCER
OFF”.
[
1. Press the A-M button and select “BASS 0”.
]
[
]
2. Turning the ROTARY knob clockwise em-
phasizes the bass; turning it counterclockwise
attenuates the bass.
[ ]
Each time you press the Z button, the tone effect
changes in the following order:
“OFF”
“EXCITE” “OFF” ...
• BASS BOOST: bass emphasized
“BASS BOOST”
“IMPACT”
∗ The factory default setting is “0”.
(
)
Adjustment range: -6 to +7
• IMPACT
• EXCITE
: bass and treble emphasized
Adjusting the treble
[
: bass and treble emphasized
mid de-emphasized
]
1. Press the A-M button and select “TREBLE
0”.
• OFF
: no sound effect
[
]
2. Turning the ROTARY knob clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
∗ The factory default setting is “0”.
(
)
Adjustment range: -6 to +6
DXZ466MP
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Radio Mode Operations
Adjusting MAGNA BASS EX
Listening to the radio
[
]
The MAGNA BASS EX does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
1. Press the SRC button and select the radio
mode, then the radio will be on.
[
]
2. To select a preset band, press the BND
button, then select one of the preset bands
such as FM1, FM2, FM3 or AM. Every time
∗ The factory default setting is off.
[
]
the BND button is pressed, the display will
change as:
[
]
1. Press and hold the A-M button for 1 second or
longer to turn on the MAGNA BASS EX effect.
“M-BASS EX ON” lights in the display.
FM1 FM2 FM3 AM FM1...
[
]
[
to tune in the desired station.
]
2. Press and hold the A-M button for 1 second or
longer to turn off the MAGNA BASS EX effect.
“M-BASS EX OFF” lights in the display.
3. Press the
,
lever upward or downward
Seek tuning
[
]
1. Press the BND button and select the desired
(
)
band FM or AM .
∗ If “MANU” is lit in the display, press and hold
[
]
the BND button for 1 second or longer.
“MANU” in the display goes off and seek tuning
is now available.
[
to start automatic station tuning.
,
]
2. Press the
lever upward or downward
When the lever is pressed upward, search
will be performing in the direction of higher
frequencies. When the lever is pressed
downward, search will be performed in the
direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
[
]
1. Press the BND button and select the desired
(
)
band FM or AM .
∗ If “MANU” is not lit in the display, press and hold
]
[
the BND button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.
DXZ466MP
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Mode Operations
•
Press the
Quick tuning:
[
Recalling a preset station
(
)
6-FM3, 6-AM exists to store individual radio
stations in memory. Pressing the corresponding
]
,
lever upward or downward
A total of 24 preset positions 6-FM1, 6-FM2,
and hold in position for 1 second or longer to begin
station tuning.
[
DIRECT button recalls the stored radio frequency
automatically.
]
•
Press the
Step tuning:
[
to perform manual tuning.
]
,
lever upward or downward
[
]
1. Press the BND button and select the desired
(
)
band FM or AM .
[
]
2. Press the corresponding DIRECT button to
recall the stored station.
Preset memory function
Preset memory function can store up to 24
stations:
[
]
∗ Press and hold one of the DIRECT buttons for
2 seconds or longer to store that station into
preset memory.
six stations for each of FM1, FM2, FM3 and AM.
Manual memory function
[
(
)
Instant station recall ISR
]
1. Press the BND button, to select a band you
want to store in the memory.
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even operates
with the unit in other modes.
[
]
2. Press the
station.
,
lever to tune into a desired
[
]
3. Press and hold one of the DIRECT button for
2 seconds or longer to store the current station
into preset memory.
•
ISR memory
1. Select the station that you wish to store in ISR
memory.
[
]
2. Press and hold the ISR button for 2 seconds
or longer.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially.
If 6 receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
•
Recalling a station with ISR
[
]
In any mode, press the ISR button to turn on
the radio function and tune the selected radio
station. “ISR” and its frequency appear in the
[
]
[
]
1. Press the BND button and select the desired
display. Press the ISR button again to return to
the previous mode.
(
)
band FM or AM .
[
]
2. Press and hold the PS/AS button for 2
seconds or longer. The stations with good
reception are stored automatically to the preset
channels.
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
[
1. Press the PS/AS button.
]
2. When a desired station is tuned in, press the
[
]
PS/AS button again to continue receiving that
station.
Note:
[
]
• Be careful not to press and hold the PS/AS button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing sta-
tions.
DXZ466MP
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/MP3/WMA Mode Operations
(
Logical format File system
)
•
What is MP3?
MP3 is an audio compression method and
classified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format. This
MP3 features the original audio data compression
to about 12 percent of its initial size with a high
quality sound. This means that about 10 music
CDs can be recorded on a CD-R disc or CD-RW
disc to allow a long listening time without having
to change CDs.
1. When writing MP3/WMAfile on a CD-R disc or
CD-RW disc, please select “ISO9660 level 1, 2
or JOLIET or Romeo” as the writing software
format. Normal play may not be possible if the
disc is recorded on another format.
2. The folder name and file name can be
displayed as the title during MP3/WMA play
but the title must be within 64 single byte
(
alphabetical letters and numerals including
)
an extension .
3. Do not affix a name to a file inside a folder
having the same name.
What is WMA?
WMA is the abbreviation of Windows Media
Audio, an audio file format developed by Microsoft
Corporation.
•
Folder structure
1. A disc with a folder having more than 8
hierarchical levels will be impossible.
Notes:
(
• If you play a file with DRM Digital Rights Manage-
)
ment for WMA remaining ON, no audio is output.
•
Number of files or folders
• Windows Media™, and the Windows® logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
1. Up to 255 files can be recognized per folder.
Up to 512 files can be played.
2. Tracks are played in the order that they were
(
recorded onto a disc. Tracks might not always
)
be played in the order displayed on the PC.
•
To disable DRM
(
)
Digital Rights Management :
1. When using Windows Media Player 8, click on
TOOLS OPTIONS COPY MUSIC tab,
3. Some noise may occur depending on the type
of encoder software used while recording.
then under COPY SETTINGS unclick the
check box for PROTECT CONTENT. Then,
reconstruct files.
CD-DA/MP3/WMA selection on
multi-session CD
When a disc contains both normal CD type tracks
and MP3/WMA tracks mixedly, you can select
which type of the recorded tracks to play.
2. When using Windows Media Player 9, click on
TOOL OPTIONS MUSIC RECORD tab,
then under Recording settings, unclick the
Check box for RECORD PROTECTED
MUSIC. Then, reconstruct files. Personally
constructed WMA files are used at your own
responsibility.
•
Default value is “CD”.
[
]
Each time you press and hold the BND button for
1 second or longer, the mixed mode is switched
between CD type or MP3/WMAtype. The following
indication appears in the title display when
switching the track type to be played.
•
Precautions when creating MP3/WMA
disc
•
Usable sampling rates and bit rates:
Display when
CD type track
is selected:
1. MP3: Sampling rate 11.025 kHz-48 kHz,
Bit rate: 8 kbps-320 kbps/VBR
2. WMA: Bit rate 48 kbps-192 kbps
Display when
MP3/WMA
•
File extensions
type track is
selected:
•
Always add a file extension “.MP3” or “.WMA”
to MP3 or WMAfile by using single byte letters.
If you add a file extension other than specified
or forget to add the file extension, the file
cannot be played
DXZ466MP
.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/MP3/WMA Mode Operations
[
]
1. Types of recording that can be played are as
follows.
2. Press the
is ejected.
button. Remove the disc after it
3. Close the FLIP DOWN PANEL.
Setting
Set to CD Set to MP3/WMA
Disc
Notes:
• Always close the FLIP DOWN PANEL once you
take out the disc.
Mixed with CD
and MP3/WMA
type tracks
Play CD
Play MP3/WMA
• If you force a CD into before auto reloading, this
can damage the CD.
CD type track only
Play CD
Play CD
MP3/WMA type
track only
Play MP3/ Play MP3/WMA
WMA
(
)
• If a CD 12 cm is left in the ejected position for 15
(
seconds, the CD is automatically reloaded. Auto
)
reload .
2. After making these settings, remove the disc
and then reinsert it.
• 8 cm CDs are not auto reloaded. Be sure to remove
it when ejected.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
Listening to a disc already loaded
in the unit
Press the SRC button to select the CD/MP3/
WMA mode.
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WMA
type, the CD cannot be played normally in some
cases.
[
]
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
If there is no disc loaded, the indication “NO DISC”
appears in the title display.
Disc-In-Play function
As long as the ignition key is turned to the ON
or ACC position, this function allows you to turn
the power to the unit and start playing the disc
automatically when the disc is inserted even if the
power is not turned on.
[
∗ The mode changes each time the SRC button is
]
(
pressed. Modes are not displayed for equipment
)
that is not connected.
(
AUX Radio...
)
Radio CD/MP3/WMA
)
TV
CD changer
(
)
(
DVD changer
! CAUTION
• Do not try to put your hand or fingers in the
disc insertion slot. Also never insert foreign
objects into the slot.
Loading a CD
[
]
1. Press the OPEN button to access the CD
SLOT behind the FLIP DOWN PANEL.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD label,
or discs with marks where cellophane tape
or rental CD labels were removed. It may be
impossible to extract these discs from the
unit and they may cause the unit to break
down.
2. Insert a CD into the center of the CD SLOT
with the labeled side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be an-
other CD in the mechanism or the unit may require
service.
Backup eject function
[
if the power to the unit was not turned on.
]
• Discs not bearing the
CD-ROMs cannot be played by this unit.
or
mark and
Just pressing the
button ejects the disc even
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
[
]
1. Press the OPEN button to open the FLIP
DOWN PANEL.
Note:
• If the FLIP DOWN PANEL will not open far enough,
open it gently with your hand.
DXZ466MP
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/MP3/WMA Mode Operations
Notes:
Loading 8 cm CD
∗ No adapter is required to play an 8 cm CD.
• If the CD playing is not a CD-text data or no user
title has been input, “ U NO TITLE” appears in the
display.
∗ Insert the 8 cm CD into the center of the insertion
slot.
• If MP3/WMA disc is not input TAG, “ NO TAG”
appears in the display.
3. Close the FLIP DOWN PANEL.
• For MP3, supports ID3 Tags V2.3/2.2/1.1/1.0.
• Tag displays give priority to V2.3/2.2
! CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
• In the case of album Tags for WMA, the information
written into the extension header is displayed.
Notes:
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• Only ASCII characters can be displayed in Tags.
Title display mode
1. There are 5 types of display for the Title Display
mode.
• After loading a CD, always close the FLIP DOWN
PANEL.
[ ]
2. To select the next type, press the T button for
less than 1 second.
Pausing play
[
appears in the display.
]
1. Press the
button to pause play. “PAUSE”
The arrangement is shown below.
After 2 seconds
[
]
2. To resume CD play, press the
again.
button
Displaying CD titles
This unit can display title data for CD-text/MP3/
WMA disc and user titles input with this unit.
[ ]
1. Press the D button to display the title.
[ ]
2. Each time you press the T button, the title
display changes in the following order:
3. The displayed item can be scrolled by pressing
[ ]
the T button for more than 1 second.
•
CD-TEXT data
4. If a MP3/WMA file does not support for ID3
TAG, the display will show “NO TAG”.
5. If a MP3/WMAfile encode with ID3 TAG header
but no consist of any TAG information, the
display will show nothing.
Notes:
• The folder name will be displayed as “ROOT” which
the file allocates in the root folder.
•
MP3/WMA disc
• The MP3 player decodes each file ID3 TAG ver 2
by default, if ID3 TAG ver 2 is unavailable, ID3 TAG
ver 1 will be decoded.
(
)
• UNICODE ID3 Chinese, Japanese and etc is not
supported.
DXZ466MP
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/MP3/WMA Mode Operations
Selecting a track
Example of a mediumʼs folder/file hierarchy
• Track-up
1. Press the
[
beginning of the next track.
]
lever upward to move to the
[
]
2. Each time the
lever is pressed upward,
playback proceeds to another track in the
advancing direction.
• Track-down
1. Press the
[
beginning of the current track.
]
lever downward to move the
[
to the beginning of the previous track.
]
2. Press the
lever downward twice to move
Fast-forward/fast-backward
•
Fast-forward
[
]
Press the
lever upward and hold in position for
1 second or longer.
•
Press the
Fast-backward
[
tion for 1 second or longer.
]
lever downward and hold in posi-
∗ For MP3/WMA discs, it takes some time until the
start of searching and between tracks. In addition,
the playing time may have a margin of error.
Folder select
This function allows you to select a folder
containing MP3/WMA files and start playing from
the first track in the folder.
MP3/WMA playing order
When selected for play folder up down functions,
files and folders are accessed in the order in which
they were written by the CD-ROM writer. Because
of this, the order in which they are expected to
be played may not match the order in which they
are actually played. You may be able to set the
order in which MP3/WMA are to be played by
writing them onto a medium such as a CD-R with
their file names beginning with play sequence
numbers such as “01” to “99”, depending on your
CD writer.
[
1. Press the DN or the UP button.
]
[
]
[
]
Press the DN button to move the previous
[
]
folder. Press the UP button to move the next
folder.
For example, a medium with the following folder/
file hierarchy is shown below.
DXZ466MP
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/MP3/WMA Mode Operations
[
]
∗ Press the UP button while in the final folder
to shift to the first folder.
•
Random play
This function allows you to play all tracks recorded
on a disc in a random order.
∗ Folder without an MP3/WMA file is not
selectable.
[
]
1. Press the RDM button to perform random
play.
[
,
]
2. To select a track, press the
upward or downward.
lever
“
RDM” appears in the display.
•
Folder random play
Top function
The top function resets the CD player to the first
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA disc in
a random order.
[
]
track of the disc. Press the BND button to play
(
)
the first track Track No. 1 on the disc.
[
]
1. Press and hold the RDM button for 1 second
or longer to perform folder random play.
∗ In case of MP3/WMA, the first track of a folder being
played will be returned.
“
RDM” appears in the display.
Other various play functions
•
•
To cancel play
Scan play
This function allows you to locate and play the first
10 seconds of all the tracks recorded on a disc.
1. Press the operating button previously
selected.
[
]
1. Press the SCN button to perform scan play.
“
SCN” appears in the display.
∗ Scan play starts from the next track after the
track currently being played.
•
Folder scan play
This function allows you to locate and play the first
10 seconds of the first track of all the folders on
an MP3/WMA disc.
[
]
1. Press and hold the SCN button for 1 second
or longer to perform folder scan play.
“
SCN” appears in the display.
∗ Folder scan play starts from the next track
after the track currently being played.
•
Repeat play
This function allows you to play the current track
repeatedly.
[
]
1. Press the RPT button to perform repeat play.
“
RPT” appears in the display.
•
Folder repeat play
This function allows you to play a track currently
being played in the MP3/WMA folder repeatedly.
[
]
1. Press and hold the RPT button for 1 second
or longer to perform folder repeat play.
“
RPT” appears in the display.
DXZ466MP
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations Common to Each Mode
[
]
3-1. Turn the ROTARY knob to select the setting.
To change display setting
[ ]
[
]
Each time you turn the ROTARY knob,
the setting changes in the following order:
1. Press and hold the D button for 1 second or
longer to switch to the adjustment selection
display.
“Pattern OFF” “Pattern SS” “Pattern
MESSAGE”
[
,
]
to select the “item name”.
2. Press the
lever upward or downward
•
Entering MESSAGE INFORMATION
“CLOCKPush ENT
“SCREEN SVR Push ENT
”
Message up to 30 characters long can be stored
in memory and displayed as a type of screen
saver setting.
”
“MSG INPUT Push ENT
“AUTO SCROLL”
“CONTRAST”
”
“DIMMER”
∗ The factory default setting is “WELCOME TO
CLARION”.
[
]
3. Turn the ROTARY knob to select the “desired
setting value”.
2-1. Select “ MSG INPUT Push ENT ”.
[
]
[ ]
∗ After completing settings, press the D button
to return to the previous mode.
3-1. Press the
button.
[
]
3-2. Press and hold BND button for 1 second or
longer to clear the old message.
•
Setting the clock
[
ward to move the cursor.
]
3-3. Press the
,
lever upward or down-
2-1. Select “ CLOCK Push ENT ”.
[
[
]
3-1. Press the
3-2. Press the
button.
[
]
3-4. Press the BND button to select a character.
[
]
Each time you press the BND button, the
character changes in the following orders:
]
,
lever upward or
downward to select the hour or the minute.
Capital letters Small letters Numbers/
Symbols Umlaut Capital letters...
[
]
3-3. Turn the ROTARY knob to set the correct
time.
[
]
3-5. Turn the ROTARY knob to select the desired
character.
∗ The clock is displayed in 12-hour format.
[
]
3-4. Press the
memory.
button to store the time into
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
Note:
[
]
3-7. Press and hold the
button for 2 seconds
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the carʼs
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
or longer to store the message in memory
and cancel input message mode.
[
]
∗ Press and hold the BND button for 1 second
or longer to cancel the input message. Then
[
]
press and hold the
button for 2 seconds
•
Turning the screen saver function on or
off
or longer to store the message and the mes-
sage return to default setting.
This unit is provided with the screen saver function
which allows you to show various kinds of patterns
and characters in the operation status indication
area of the display in a random order. You can turn
on and off this function.
• Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA title.
∗ The factory default setting is “ON”.
2-1. Select “ AUTO SCROLL”.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
[
]
3-1. Turn the ROTARY knob to select “ON” or
“OFF”.
• ON:
To scroll automatically.
∗ The factory default setting is “Pattern SS”.
• OFF:
To scroll just 1 time when the title was changed or the
Push ENT
2-1. Select “ SCREEN SVR
”.
[ ]
T button was pressed for 1 second or longer.
DXZ466MP
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations Common to Each Mode
•
Adjusting the display scroll speed
•
Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from the
unit, this indicator blinks.
This feature allows you to slow down the scroll
speed when the scroll speed is too fast, making it
difficult to view the screen.
∗ The factory default setting is “OFF”.
2-1. Select “ BLINK LED”.
∗ The factory default setting is “SPEED 3”
2-1. Select “ SCRL SPEED”.
[
]
3-1. Turn the ROTARY knob to select “ON” or
“OFF”.
[
]
3-1.Turn the ROTARY knob to select the setting.
∗ This setting item can be adjusted within the
range SPEED 1 to SPEED 6.
• Setting the external amplifier
∗ The factory default setting is “OFF”.
Adjust this setting item while viewing how the
appearance of the display changes.
2-1. Select “ AMP CANCEL”.
[
]
3-1. Turn the ROTARY knob to select “ON” or
“OFF”.
•
Dimmer control
You can setting the dimmer control “ON” or “OFF”.
∗ The factory default setting is “ON”.
• ON:
Use with connected AMP.
2-1. Select “ DIMMER”.
• OFF:
[
]
3-1. Turn the ROTARY knob to select “ON” or
“OFF”.
Use with inside AMP.
•
Selecting AUX IN sensitivity
•
Adjusting the display contrast
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is “08”.
(
∗ The factory default setting is “MID”.
2-1. Select “ AUX SENS”.
)
Adjustment level: 01 to 16
2-1. Select “ CONTRAST”.
[
]
3-1. Turn the ROTARY knob to select “LOW”,
“MID” or “HIGH”.
[
]
3-1. Turn the ROTARY knob to adjust the
contrast.
•
Triggered audio mute for cellular
telephones
To change other settings
]
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone
rings in the car.
[
1. Press the ADJ button to switch to the
adjustment selection display.
[
ward to select the “item name”.
,
]
2. Press the
lever upward or down-
∗ This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
[
,
]
Each time the
lever is pressed
up/down, the item display changes in the
following order:
“BLINK LED”
“AUX SENS”
“AMP CANCEL”
“SYSTEM CHECKPush ENT
•
Performing a system check
”
This function allows you to perform a system check
from the adjust mode when required.
[
]
3. Turn the ROTARY knob to select the “desired
setting item”.
2-1. Select “ SYSTEM CHECK Push ENT ”.
[
∗ After completing settings, press the ADJ but-
]
[
]
3-1. Press and hold the
or longer.
button for 1 second
ton to return to the previous mode.
“SYSTEM CHECK” appears in the display,
then the unit returns to the previous
operation mode.
DXZ466MP
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations Common to Each Mode
Entering titles
Clearing titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer andTV
stations. The number of titles that can be entered
for each mode are as follows.
1. Select and play a CD in the CD changer or tune
in to a TV station or TUNER for which you want
to clear the title.
[
]
2. Press the
display.
D
button and display the title
Mode
Number of titles
50 titles
[ ]
3. Press and hold the T button for 1 second or
longer.
CD mode
TV mode
Tuner mode
20 titles
The display switches to the title input display.
30 titles
[
]
4. Press and hold the BND button for 1 second
or longer.
CD changer mode
DCZ625 connected
CDC655Tz connected
Number of titles
100 titles
All characters in the title disappear.
100 titles
[
]
5. Press and hold the
button for 2 seconds
or longer to clear the title and cancel title input
mode.
[
]
1. Press the SRC button to select the mode you
(
want to enter a title TUNER, CD, CD changer
)
or TV .
AUX function
2. Select and play a CD in the CD changer or tune
in to a TV station or TUNER for which you want
to enter the title.
This system has an external input jack so you
can listen to sounds and music from external de-
vices connected to this unit.
[
]
3. Press the
display.
D
button and display the title
[ ]
4. Press and hold the T button for 1 second or
longer.
The display switches to the title input display.
[
to move the cursor.
]
5. Press the
,
lever upward or downward
[
]
6. Press the BND button to select a character.
[
Each time you press the BND button, the
character changes in the following order:
]
Capital letters Small letters Numbers/
Symbols Umlaut Capital letters...
[
]
7. Turn the ROTARY knob to select the desired
character.
8. Repeat steps 5 to 7 to enter up to 10 characters
for the title.
[
]
9. Press and hold the
button for 2 seconds
or longer to store the title into memory and
cancel title input mode.
DXZ466MP
23
Download from Www.Somanuals.com. All Manuals Search And Download.
9. OPERATIONS OF ACCESSORIES
CD Changer Operations
Note:
Displaying CD titles
• The following operations are the same as for CD
This unit can display title data for CD-text CDs and
mode:
user titles input with this unit.
∗ Pause
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
∗ Track selection
∗ Fast-forward/fast-backward
∗ Scan play
[ ]
1. Press the D button to display the title.
[ ]
2. Each time you press the T button, the title
display changes in the following order:
∗ Repeat play
∗ Random play
(
See “CD/MP3/WMA Mode Operations” page 16-
)
20 for details.
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all CD
changer functions. This unit can control a total of
2 changers.
Notes:
• If the CD playing is not a CD-text CD or no user
U
title has been input, “ NO TITLE” appears in the
display.
[
]
Press the SRC button and select the CD changer
mode to start play. If 2 CD changers are con-
[
]
nected, press the SRC button to select the CD
changer for play.
• If a CD-text CD is not input its disc title or a track
title, “
O
the display.
NO TITLE” or “ NO TITLE” appears in
∗ If “NO MAGAZINE” appears in the display, in-
sert the magazine into the CD changer. “DISC
CHECK” appears in the display while the player
(
loads checks the magazine.
)
Procedure to scroll a title
Set “AUTO SCROLL” to “ON” or “OFF”.
∗ If “NO DISC” appears in the display, eject
the magazine and insert discs into each slot.
Then, reinsert the magazine back into the CD
changer.
(
The factory default setting is “ON”. Refer to the
subsection “Turning the screen saver function
on or off” in section “Operation common to
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
)
each mode”.
• When set to “ON”
The title is automatically kept scrolling.
! CAUTION
• When set to “OFF”
To scroll just 1 time when the title was changed or the
CD-ROM discs cannot be played from every CD
changer, itʼs depended on the model.
[ ]
T button was pressed for 1 second or longer.
Selecting a CD
[
[
]
]
Press the UP or DN button to select the desired
disc.
∗ If a CD is not loaded in a slot of magazine, press-
[
ing the UP or DN button can not work.
]
[
]
DXZ466MP
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Operations
CD Changer Operations
Note:
• The following operations are performed the same
as for radio mode:
Other various play functions
•
Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is cancelled.
∗ Channel selection
∗ Storing channels in memory
∗ Calling channels from memory
∗ Auto store
∗ Disc scan play is useful when you want to select a
desired CD.
∗ Preset scan
(
)
See “Radio Mode Operations” page 14-15 for
details.
[
]
1. Press and hold the SCN button for 1 second
or longer. “D.SCN” appears in the display and
disc scan play starts.
TV tuner functions
•
Disc repeat play
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
After all the tracks on the current disc have been
played, disc repeat play automatically replays the
current disc over from the first track.
This function continues automatically until it is
cancelled.
Watching a TV
[
[
]
1. Press and hold the RPT button for 1 second
or longer. “D.RPT” appears in the display and
disc repeat play starts.
]
1. Press the SRC button and select the TV
mode.
[
]
2. Press the BND button to select the desired
(
)
TV band TV1 or TV2 . Each time the button is
pressed, the input selection toggles between
TV1 and TV2.
•
Disc random play
The disc random play selects and plays individual
tracks or discs automatically in no particular
order.
[
3. Press the
to tune in the desired TV station.
,
]
lever upward or downward
This function continues automatically until it is
cancelled.
Watching a video
The TV tuner has a VTR input terminal to which 1
[
]
1. Press and hold the RDM button for 1 second
or longer. “D.RDM” appears in the display and
disc random play starts.
external device can be connected. Connect a 12
(
)
V video cassette player VCP or videocassette
(
)
recorder VCR to the TV tuner input terminal.
•
To cancel play
[
]
1. Press the operating button previously
selected.
1. Press and hold the ADJ button for 1 second
or longer to select VTR.
2. To return to the TV broadcast, press and hold
]
[
the ADJ button for 1 second or longer.
Setting the TV area
(
When you select the TV area TV reception
)
area , the TV tuner area setting changes.
[
]
1. Press the ADJ button to switch to the
adjustment selection display.
[
]
2. Press the
,
lever upward or downward
to select “ TV AREA Push ENT ”.
[
]
3. Press the
button.
DXZ466MP
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Operations
[
]
4. Turn the ROTARY knob to select the reception
area.
[
]
5. Press the
button.
[
]
6. Press the ADJ button to return to the previous
mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
[
]
1. Press the ADJ button to switch to the
adjustment selection display.
[
,
]
to select “ TV DIVER”.
2. Press the
lever upward or downward
[
]
3. Turn the ROTARY knob clockwise to set to
“ON” or counterclockwise to set to “OFF”.
• ON:
Sets the diver setting to ON.
• OFF:
Sets the diver setting to OFF.
[
]
4. Press the ADJ button to return to the previous
mode.
DXZ466MP
26
Download from Www.Somanuals.com. All Manuals Search And Download.
10.TROUBLESHOOTING
Problem
Cause
Measure
Power does not turn on. Fuse is blown.
(
Replace with a fuse of the same amperage.
If the fuse blows again, consult your store of
purchase.
)
No sound is produced
Incorrect wiring.
Consult your store of purchase.
No sound output when
operating the unit with
amplifiers or power
antenna attached.
Power antenna lead is
shorted to ground or
excessive current is
required for remote-on
the amplifiers or power
antenna.
1. Turn the unit off.
2. Remove all wires attached to the power
antenna lead. Check each wire for a possible
short to ground using an ohm meter.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to
the power antenna lead one by one. If
the amplifiers turn off before all wires are
attached, use an external relay to provide
(
remote-on voltage excessive current
)
required .
[
]
Nothing happens when
button are pressed.
Display is not accurate.
The microprocessor has
malfunctioned due to
noise, etc.
Turn off the power, then press the OPEN
button and remove the DCP.
Press the reset button for about 2 seconds
with a thin rod.
DCP or main unit
connectors are dirty.
Wipe the dirt off with a soft cloth moistened
with cleaning alcohol.
No sound heard.
The speaker protection
circuit is operating.
1. Turn down sound volume. Function can
also be restored by turning the power off
and on again. (Speaker volume is reduced
automatically when the speaker protection
circuit operates).
2. If the sound is muted again, consult our
service department.
DXZ466MP
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Cause
Measure
No sound heard.
MP3/WMA files are
absent in a disc.
Write MP3/WMA files onto the disc properly.
Files are not recognized
as an MP3/WMA file.
Use MP3/WMA files encoded properly.
File system is not
correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo
file system.
Sound skips or is noisy.
Disc is dirty.
Clean the disc with a soft cloth.
Disc is heavily scratched
or warped.
Replace with a disc with no scratches.
Sound is cut or skipped. MP3/WMA files are not
Use MP3/WMA files encoded properly.
Noise is generated or
noise is mixed with
sound.
encoded properly.
Sound is bad directly
Water droplets may
Let dry for about 1 hour with the power on.
after power is turned on. form on the internal lens
when the car is parked
in a humid place.
Wrong filename
File system is not
correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo
file system.
DXZ466MP
28
Download from Www.Somanuals.com. All Manuals Search And Download.
11. ERROR DISPLAYS
Error Display
Cause
Measure
A DISC is caught inside the CD This is a failure of CD deckʼs mechanism and
ERROR 2
deck and is not ejected.
consult your store of purchase.
A DISC cannot be played due
to scratches,etc.
Replace with a non-scratched, non-warped-
disc.
ERROR 3
ERROR 6
A DISC is loaded upside-down
inside the CD deck and does
not play.
Eject the disc then reload it properly.
Error Display
Cause
Measure
A CD inside the CD changer is This is a failure of CD changerʼs mechanism
ERROR 2
not loaded.
and consult your store of purchase.
A CD inside the CD changer
cannot be played due to
scratches, etc.
Replace with a non-scratched, non-warped
disc.
ERROR 3
ERROR 6
A CD inside the CD changer
cannot be played because it is
loaded upside-down.
Eject the disc then reload it properly.
Error Display
ERROR 2
ERROR 3
Cause
Measure
A DISC inside the DVD
changer cannot be played.
This is a failure of DVD mechanism and
consult your store of purchase.
A DISC cannot be played due
to scratches, etc.
Retry or replace with a non-scratched, non-
warped-disc.
A DISC inside the DVD chang- Eject the disc then reload it properly.
er cannot be played because it
is loaded upside-down.
ERROR 6
Parental level error.
Region code error.
Set the correct Parental level.
ERROR P
ERROR R
Eject the disc and replace correct region code
disc.
DXZ466MP
29
Download from Www.Somanuals.com. All Manuals Search And Download.
12.SPECIFICATIONS
FM tuner
Frequency Range: 87.0 MHz to 108 MHz
Audio
Maximum Power Output: 208 W 52 W X 4 ch
(
)
Usable Sensitivity: 11 dBf
Continuous Average Power Output:
17 W X 4, into 4 Ω, 20 Hz to 20 kHz,1%THD
50 dB Quieting Sensitivity: 17 dBf
Alternate Channel Selectivity: 75 dB
(
)
Bass Control Action 100 Hz : ±14 dB
(
Treble Control Action 10 kHz : ±14 dB
)
(
Stereo Separation 1 kHz : 35 dB
)
(
)
Line Output with A/C 1 kHz, 10 kΩ : 1.8 V
±
Frequency Response 3 dB : 30 Hz to 15 kHz
(
)
General
Power Supply Voltage:
AM tuner
Frequency Range:
(
)
14.4 V DC 10.8 V to 15.6 V allowable , nega-
AM 531 kHz to 1629 kHz
tive ground
Usable Sensitivity: 25 μV
Current Consumption: Less than 15 A
(
Speaker Impedance: 4 Ω 4 Ω to 8 Ω allowable
)
CD player
System: Compact disc audio system
(
Weight: 2.42 lb. 1.1 kg
)
Dimensions:
178 mm Width X 50 mm Height X 152 mm
Depth
Usable Discs: Compact disc
±
Frequency Response: 10 Hz to 20 kHz 1 dB
(
)
(
Signal-to-Noise Ratio: 85 dB 1 kHz IHF-A
)
(
Dynamic Range: 80 dB 1 kHz
)
Harmonic Distortion: 0.01%
MP3
Decode Format: MPEG 1,2 and 2.5 -Layer 3
(
)
Sampling rate kHz : MPEG-1: 32,44.1,48
MPEG-2: 16,22.05,24
MPEG-2.5: 8,11.025,12
Notes:
• Specifications comply with JEITA Standards.
(
)
Bit-rate kbps : 8, 16, 24, 32, 40, 48, 56, 64,
80, 96, 112, 128, 144, 160, 192,
224, 256, 320, VBR
• Specifications and design are subject to change
without notice for further improvement.
CD-ROM Format: ISO9660 Level 1, 2, Romeo
and Joliet
• Please make sure when connecting external power
amplifier, that you properly, to the car chassis,
ground the amplifier.
Folder Level Limit: 8 Level
Folder Support: 255
• If this is not done, severe damage to the source unit
may happen.
File Support: 512
Folder Name: Maximum 64 bytes
File Name: Maximum 64 bytes
DXZ466MP
30
Download from Www.Somanuals.com. All Manuals Search And Download.
|