Clarion CD Player DXZ388RUSB User Manual

Owner’s manual

Mode d’emploi

Bedienungsanleitung

Istruzioni per l’uso

Gebruiksaanwijzing

Manual de instrucciones

Bruksanvisning

Manual de instruções

DXZ388RUSB

DXZ389RUSB

DXZ389RGUSB

CD/USB/MP3/WMA/AAC RECEIVER WITH CeNET CONTROL

AUTORADIO CD/USB/MP3/WMA/AAC / AVEC COMMANDE CeNET

CD/USB/MP3/WMA/AAC-RECEIVER MIT CeNET-STEUERUNG

SINTOLETTORE CD/USB/MP3/WMA/AAC CON CONTROLLO CeNET

CD/USB/MP3/WMA/AAC-RADIO-COMBINATIE MET CeNET-BEDIENING

RECEPTOR CD/USB/MP3/WMA/AAC CON CONTROL CeNET

CD/USB/MP3/WMA/AAC-RADIO MED CeNET-KONTROLL

RECEPTOR CD/USB/MP3/WMA/AAC COM CONTROLO CeNET

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing this Clarion product.

∗ Please read this owner’s manual in its entirety before operating this equipment.

∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).

∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.

Contents

1. FEATURES...................................................................................................................................... 4

2. PRECAUTIONS ............................................................................................................................... 4

Handling Compact Discs.................................................................................................................. 5

3. CONTROLS ..................................................................................................................................... 6

Names of the Buttons and Their Functions...................................................................................... 6

Display Items.................................................................................................................................... 8

Display Screen ................................................................................................................................. 8

4. DCP (DETACHABLE CONTROL PANEL)...................................................................................... 9

5. REMOTE CONTROL ..................................................................................................................... 10

Functions of Remote Control Unit Buttons..................................................................................... 10

Inserting the Battery ....................................................................................................................... 12

6. OPERATIONS................................................................................................................................ 13

Basic Operations............................................................................................................................ 13

Radio Operations ........................................................................................................................... 17

Radio Data System Operations...................................................................................................... 19

CD/MP3/WMA/AAC Operations..................................................................................................... 23

Operations Common to Each Mode............................................................................................... 27

7. ACCESSORIES ............................................................................................................................. 30

USB/MTP Operations..................................................................................................................... 30

iPod Operations.............................................................................................................................. 32

Bluetooth BB Operations................................................................................................................ 34

CD Changer Operations................................................................................................................. 37

8. TROUBLESHOOTING................................................................................................................... 39

9. ERROR DISPLAYS ....................................................................................................................... 41

10. SPECIFICATIONS ......................................................................................................................... 42

11. OTHERS ........................................................................................................................................ 42

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

1. FEATURES

• USB Direct Connection for iPod^®& Digital Media

• Front-panel auxiliary input & 6ch RCA output

• Bluetooth Ready via CeNET

∗ “iPod” is for legal or rightholder-authorized copying only. Don’t steal music.

“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries.

2. PRECAUTIONS

1. This unit is applicable for on-road 4 wheel

INFORMATION FOR USERS:

vehicle purpose only. Use for tractor, fork

CHANGES OR MODIFICATIONS TO THIS

truck, bulldozer, off road vehicle, 2 or 3

wheel motor bicycle, marine boat or other

special purpose vehicle is not appropriate.

PRODUCT NOT APPROVED BY THE

MANUFACTURER WILL VOID THE

WARRANTY.

2. When the inside of the car is very cold and

the player is used soon after switching on the

heater moisture may form on the disc or the

optical parts of the player and proper

playback may not be possible. If moisture

forms on the disc, wipe it off with a soft cloth.

If moisture forms on the optical parts of the

player, do not use the player for about one

hour. The condensation will disappear

naturally allowing normal operation.

3. Driving on extremely bumpy roads which

cause severe vibration may cause the sound

to skip.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

Handling Compact Discs

Use only compact discs bearing the

Storage

• Do not expose compact discs to direct

sunlight or any heat source.

mark.

Do not play heart-shaped, octagonal, or other

specially shaped compact discs.

• Do not expose compact discs to excess

humidity or dust.

Some CDs recorded in CD-R/CD-RW mode

may not be usable.

• Do not expose compact discs to direct heat

from heaters.

Handling

Cleaning

• Compared to ordinary music CDs, CD-R and

CD-RW discs are both easily affected by high

temperature and humidity and some of CD-R

and CD-RW discs may not be played.

Therefore, do not leave them for a long time

in the car.

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the

center of the compact disc to the

circumference.

• Do not use any solvents, such as

commercially available cleaners, anti-static

spray, or thinner to clean compact discs.

• New discs may

have some

Ball-point pen

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

roughness

Roughness

around the

edges. If such

discs are used,

the player may

not work or the

sound may skip. Use a ball-point pen or the

like to remove any roughness from the edge

of the disc.

• Never stick labels on the surface of the

compact disc or mark the surface with a

pencil or pen.

• Never play a compact disc with any

cellophane tape or other glue on it or with

peeling off marks. If you try to play such a

compact disc, you may not be able to get it

back out of the CD player or it may damage

the CD player.

• Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use

of such discs may cause misoperation or

damage.

• To remove a compact disc from its storage

case, press down on the center of the case

and lift the disc out, holding it carefully by the

edges.

• Do not use commercially available CD

protection sheets or discs equipped with

stabilizers, etc. These may damage the disc

or cause breakdown of the internal

mechanism.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

3. CONTROLS

Names of the Buttons and Their Functions

[

]

IR RECEIVER

[

]

[

], [

]

[

]

CD SLOT

[

]

RELEASE

[

]

USB SLOT

[

] (EJECT)

[

]

AUX

[

]

[

]

SOUND

SRC

[

]

[

]

DIRECT

BND

[

]

[

RPT

]

ROTARY

RDM

]

[

]

DISP

[

]

[

SCN

[RELEASE] button

• Press the [RELEASE] button to unlock the

DCP.

[SOUND] button

• Use the button to switch to the sound adjust

mode.

• Press and hold the button for 1 second or

longer to turn on or off the MAGNA BASS

EXTEND mode.

[

] button

• Perform preset scan while in the radio mode.

When the button is pressed and held, auto

store is performed.

[DIRECT] buttons

• Play or pause a track while in the CD/MP3/

WMA/AAC mode.

• Store a station into memory or recall it directly

while in the radio mode.

• Confirm various settings.

[RDM] button

• Perform random play while in the CD/MP3/

WMA/AAC mode.

[w] (UP), [z] (DN) buttons

• Select the folder while in the MP3/WMA/AAC

mode.

• Press and hold the button for 1 second or

longer to perform folder random play while in

the MP3/WMA/AAC mode.

• Use the buttons to perform various settings.

[IR RECEIVER]

• Receiver for remote control unit. (Operating

range: 30° in all directions)

[RPT] button

• Perform repeat play while in the CD/MP3/

WMA/AAC mode.

[CD SLOT]

• CD insertion slot.

• Press and hold the button for 1 second or

longer to perform folder repeat play while in

the MP3/WMA/AAC mode.

[USB SLOT]

• USB memory/MTP/iPod devices insertion

slot.

[AUX] input jack

• The input jack for connecting an external

device.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

Names of the Buttons and Their Functions

[SCN] button

• Perform scan play for 10 seconds of each

track while in the CD/MP3/WMA/AAC mode.

[SRC] button

• Press the button to turn on the power.

• Press and hold the button for 1 second or

longer to turn off the power.

• Press and hold the button for 1 second or

longer to perform folder scan play while in the

MP3/WMA/AAC mode.

• Switch the operation mode among the radio

mode, etc.

[TA] button

• Use the button to set the TA (Traffic

Announcement) standby mode.

[x], [v] buttons

• Select a station while in the radio mode or

select a track while in the CD/MP3/WMA/AAC

mode.

[DISP] button

• Switch the display indication.

This button is used to make various settings.

• Press and hold the button for 1 second or

longer to enter the adjust mode.

• Press and hold the button for 1 second or

longer to enter the fast-forward or fast-

backward mode.

[ROTARY] knob

• Adjust the volume by turning the knob

clockwise or counterclockwise.

[Q] (EJECT) button

• Eject a disc when it is loaded into the unit.

[BND] button

• Switch the band, or seek tuning or manual

tuning while in the radio mode.

• Play a first track while in the CD/MP3/WMA/

AAC mode.

• Press the button to change the character.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Items

Operation status indication

Source, titles, function, setting, clock, etc. are displayed.

: MUTE indication

: Alternative frequency indication

: Disc No. indication

Preset channel indication (1 to 6)

: Enter indication

REG

PTY

MANU

: Regional indication

: Traffic announcement indication

: Traffic programme indication

: Programme type indication

: Manual indication

: Bluetooth indication

: MP3 indication

: WMA indication

AAC : AAC indication

MP3

WMA

Display Screen

In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.

The screen will recover when it returns to normal temperature.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

4. DCP (DETACHABLE CONTROL PANEL)

The control panel can be detached to prevent

Storing the DCP in the DCP Case

theft. When detaching the control panel, store it

Hold the DCP, in the orientation as shown in the

in the DCP (DETACHABLE CONTROL PANEL)

figure below, and put it into the supplied DCP

case. (Ensure the DCP is in the correct

orientation.)

case to prevent scratches.

We recommend taking the DCP with you when

leaving the car.

Removing the DCP

DCP

1. Press the [SRC] button for 1 second or

longer to switch off the power.

2. Press in the [RELEASE] button.

[

] button

RELEASE

DCP case

CAUTION

• The DCP can easily be damaged by

shocks. After removing it, be careful not to

drop it or subject it to strong shocks.

• When the Release button is pressed and

the DCP is unlocked, the car’s vibrations

may cause it to fall. To prevent damage to

the DCP, always store it in its case after

detaching it.

∗ The DCP is unlocked

3. Remove the DCP.

• The connector connecting the main unit

and the DCP is an extremely important

part. Be careful not to damage it by

pressing on it with fingernails, pens,

screwdrivers, etc.

DCP

Main Unit Front

DCP Rear Panel

Attaching the DCP

1. Insert the right side of the DCP into the main

unit.

2. Insert the left side of the DCP into the main

unit.

DCP

connector

Main unit connector

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

DCP

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

5. REMOTE CONTROL

Functions of Remote Control Unit Buttons

∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main

unit.

Signal transmitter

[

]

[

]

SRC

BND

]

[

], [

[

], [

]

[

MUTE

DISP

[

]

PTY

[

]

[

]

PS/AS

[AF] button

● Shared modes

• Press to cancel an emergency broadcast

during an ALARM interrupt.

[SRC] button

• Use to alternate operation mode among the

various modes.

[PTY] button

• Press to cancel a PTY broadcast during a

PTY interrupt.

• Press to cancel a traffic announcement

broadcast, an emergency broadcast, and a

PTY broadcast during a TA, ALARM or PTY

interrupt.

[DISP] button

• Press to alternate among main display, title

display and CT (clock time) display.

[w], [z] buttons

• Increases and decreases volume.

● Radio (Radio Data System) mode

[BND] button

[MUTE] button

• Turns mute function on and off.

• Switches reception band.

[TA] button

• TA on and off.

[x], [v] buttons

• Moves preset channels up and down.

• Press to cancel a traffic announcement

broadcast during a TA interrupt.

[PS/AS] button

• Press to perform preset scan.

• Press and hold the button for 2 seconds or

longer to perform auto store.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

Functions of Remote Control Unit Buttons

[AF] button

• AF function on and off.

● CD changer mode

[BND] button

• Press to switch to next disc in ascending

order.

• Press and hold the button for 1 second or

longer to perform REG function on and off.

[PTY] button

• PTY mode on and off.

[x], [v] buttons

• Press to move the tracks up and down.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

● CD/MP3/WMA/AAC and USB/MTP

modes

[

] button

[BND] button

• Press to play the first track.

• Switches between playback and pause.

[PS/AS] button

• Press to perform scan play.

[x], [v] buttons

• Press to move the tracks up and down.

• Press and hold the button for 1 second or

longer to perform disc scan play.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

[AF] button

• Press to perform repeat play.

[

] button

• Switches between playback and pause.

• Press and hold the button for 1 second or

longer to perform disc repeat play.

[PS/AS] button

• Press to perform scan play.

[PTY] button

• When in MP3/WMA/AAC and USB/MTP

modes, press and hold the button for 1

second or longer to perform folder scan play.

• Press to perform random play.

• Press and hold the button for 1 second or

longer to perform disc random play.

[AF] button

• Press to perform repeat play.

● iPod mode

• When in MP3/WMA/AAC and USB/MTP

modes, press and hold the button for 1

second or longer to perform folder repeat

play.

[x], [v] buttons

• Press to move the tracks up and down.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

[PTY] button

• Press to perform random play.

[

] button

• Switches between playback and pause.

• When in MP3/WMA/AAC and USB/MTP

modes, press and hold the button for 1

second or longer to perform folder random

play.

[AF] button

• Press to perform repeat play.

[PTY] button

• Press to perform random play.

• Press and hold the button for 1 second or

longer to perform all random play.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting the Battery

1 Turn over the remote control unit and slide

the cover in the direction indicated by the

arrow in the illustration.

2 Insert the battery (CR2025) into the insertion

guides, with the printed side (+) facing

upwards.

3 Press the battery in the direction indicated by

the arrow so that it slides into the

compartment.

4 Replace the cover and slide in until it clicks

into place.

Notes:

Misuse may result in rupture of the battery,

producing leakage of fluid and resulting in

personal injury or damage to surrounding

materials. Always follow these safety precautions:

Insertion guide

• Use only the designated battery.

• When replacing the battery, insert properly, with

+/– polarities oriented correctly.

• Do not subject battery to heat, or dispose of in

fire or water. Do not attempt to disassemble the

battery.

• Dispose of used batteries properly.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

6. OPERATIONS

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 6.

Basic Operations

Adjusting the volume

1. Turning the [ROTARY] knob clockwise

CAUTION

Be sure to lower the volume before

increases the volume; turning it

switching off the unit power or the ignition

key. The unit remembers its last volume

setting. If you switch the power off with the

volume up, when you switch the power back

on, the sudden loud volume may hurt your

hearing and damage the unit.

counterclockwise decreases the volume.

∗ The volume level is from 0 (minimum) to 33

(maximum).

Switching the display

Press the [DISP] button to select the desired

display.

Turning on/off the power

Note:

∗ Once selected, the preferred display becomes

the display default. When a function

adjustment such as volume is made, the

screen will momentarily switch to that

function’s display, then revert back to the

preferred display several seconds after the

adjustment.

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [SRC] button.

∗ For information on how to enter a title, refer to

the subsection “Entering titles” in section

“Operations Common to Each Mode”.

∗ When CT data is not received, “CT– –:– –”

appears in the display.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the [SRC] button for 1

second or longer to turn off the power for the

unit.

Note:

• The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power

is turned on, the “S-CHECK” appears in the

display. The system check starts within the unit.

Then the unit turn to the radio mode.

Selecting a mode

1. Press the [SRC] button to change the

operation mode.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

Radio ➜ CD/MP3/WMA/AAC ➜ USB/MTP/

iPod ➜ (TEL) ➜ (CD changer) ➜ AUX ➜

Radio...

∗ External equipment not connected with

CeNET is not displayed.

∗ iPod/MTP can connect to this unit via USB

SLOT.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

When “Z+FLAT” is set:

Sound Adjustment

You can adjust a sound effect or tone quality to

your preference.

3-2. Press and hold the [

] button for 1second

or longer, bass/treble characteristics

become flat and switch to the “CUSTOM ”

mode.

To change sound setting

When “CUSTOM ” is set:

1. Press the [SOUND] button to switch to the

3-1. Press the [x] or [v] button to select the

“BASS” or “TREBLE” mode to adjust.

sound adjustment selection display.

∗ The factory default sound setting is “Z-

EHCR”.

When “EXCITE/IMPACT/B-BOOST” is set:

3-2. Press the [

] button.

2. Then press the [x] or [v] button to

3-3. Press the [w] or [z] button to adjust the

select the sound adjustment mode.

setting in the range of –3 to +3.

Each time you press the [x] or [v]

button, the sound adjustment mode

changes as following order:

∗ The factory default setting is “0”.

3-4. Press the [

] button to return to the

previous mode.

“Z-EHCR” ↔ “BASS” ↔ “TREBLE” ↔

“BALANCE” ↔ “FADER” ↔ “S-W LPF” ↔

“S-W VOL” ↔ “HPF”

● Adjusting the bass

This adjustment can be performed only when

the Z-Enhancer Plus is set to “CUSTOM ”.

∗ In the case of display blinking “ENT”, you

2-1. Select “BASS”.

can press the [

setting value.

] button to adjust the

3-1. Press the [w] or [z] button to select as

∗ The sound adjustment mode will be

displayed for 2 seconds before showing the

sound setting.

following order.

“BASS(G)” ↔ “BASS(F)” ↔ “BASS(Q)”

∗ The factory default setting is “BASS(G)”.

3. Press the [w] or [z] button to adjust the

3-2. Press the [

] button.

selected audio mode.

3-3. Press the [w] or [z] button to select the

4. After completing settings, press the

[SOUND] button to return to the previous

mode.

setting.

BASS(G) : The factory default setting is “0”.

(Adjustment range: +7 to –7)

BASS(F) : The factory default setting is “60”.

● Setting the Z-Enhancer Plus

This unit is provided with 4 types of sound tone

effects stored in memory.

(Adjustment range: 60/80/100/

200)

BASS(Q) : The factory default setting is “1”.

Select the one you prefer.

∗ The factory default setting is “OFF”.

2-1. Select “Z-EHCR”.

(Adjustment range: 1/1.25/1.5/2)

3-4. Press the [

] button to return to the

previous mode.

3-1. Each time you press the [w] or [z] button,

the tone effect changes in the following

order:

“Z+FLAT” ↔ “CUSTOM ” ↔ “EXCITE” ↔

“IMPACT” ↔ “B-BOOST” ↔ “OFF”

Z+FLAT : user Z+FLAT

CUSTOM : user custom

EXCITE : bass and treble emphasized

mid emphasized

IMPACT : bass and treble emphasized

B-BOOST : bass emphasized

OFF

: no sound effect

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

Basic Operations

● Adjusting the treble

This adjustment can be performed only when

the Z-Enhancer Plus is set to “CUSTOM ”.

● Adjusting the subwoofer

You can set the low pass filter of subwoofer.

2-1. Select “S-W LPF”.

2-1. Select “TREBLE”.

3-1. Press the [w] or [z] button to select as

following order.

“THROUGH” ↔ “LPF 50” ↔ “LPF 80” ↔

“LPF 120”

“TREB(G)” ↔ “TREB(F)”

∗ The factory default setting is “TREB(G)”.

∗ The factory default setting is “THROUGH”.

3-2. Press the [

] button.

● Adjusting the subwoofer output

3-3. Press the [w] or [z] button to select the

volume

setting.

You can adjust the volume output from the unit's

subwoofer output terminal.

TREB(G) : The factory default setting is “0”.

2-1. Select “S-W VOL”.

(Adjustment range: +7 to –7)

3-1. Press the [w] or [z] button to increases

TREB(F) : The factory default setting is

“10K”.

or decreases the subwoofer volume.

∗ The factory default setting is “0”.

(Adjustment range: +6 to –6)

(Adjustment range:

10K/12.5K/15K/17.5K)

∗ When the volume level is more than 30, the

subwoofer volume adjustment value can not

reach +6.

3-4. Press the [

] button to return to the

previous mode.

● Adjusting the balance

2-1. Select “BALANCE”.

● Adjusting the HPF

2-1. Select “HPF”.

3-1. Press the [w] or [z] button to adjust the

3-1. Press the [w] or [z] button to select as

balance of the right and left speakers.

following order.

∗ The factory default setting is “CENTER”

(center). (Adjustment range: RIGHT12 to

LEFT12 (right 12 to left 12))

“120” ↔ “THROUGH”

∗ The factory default setting is “THROUGH”.

∗ This is supported only with amplifiers

equipped with this function. Output is not

supported from RCA cables.

● Adjusting the fader

2-1. Select “FADER”.

3-1. Press the [w] or [z] button to adjust the

Note:

balance of the rear and front speakers.

• During SOUND adjustment mode, if no

operation is performed for more than 10

seconds, this mode can be cancelled and return

to previous mode.

∗ The factory default setting is “CENTER”

(center). (Adjustment range: FRONT12 to

REAR12 (front 12 to rear 12))

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

Setting the MAGNA BASS EXTEND

CT (Clock Time) function

The CT function receives CT data sent from an

“Radio Data System” station and displays the

time.

∗ If a CT data is not being received, “CT– –:– –”

appears in the display.

The MAGNA BASS EXTEND does not adjust

the low frequencies like the normal sound

adjustment function, but emphasizes the deep

bass frequencies to provide you with a dynamic

sound.

∗ The factory default setting is “OFF” (off).

Note:

• CT data is not transmitted in some countries and

by some broadcast stations. Also, in some areas,

the CT may not display accurately.

1. Press and hold the [SOUND] button for 1

second or longer to turn on the MAGNA

BASS EXTEND effect. “M-B EX” appears in

the display for 2 seconds.

2. Press and hold the [SOUND] button for 1

second or longer to turn off the MAGNA

BASS EXTEND effect.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

Radio Operations

● LOCAL SEEK

Listening to the radio

If the [x] or [v] button is pressed and held

in position for 1 second or longer, local seek

tuning will be enabled. Broadcast stations with

good reception sensitivity are selected.

∗ When local seeking starts, “LO” appears in the

display.

1. Press the [SRC] button and select the radio

mode. The frequency or PS and PTY

appears in the display.

∗ PS: Programme service name

∗ PTY: Programme type

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the

radio reception band changes in the

following order:

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ AM

(MW/LW) ➜ F1 (FM1)...

When you are in the step tuning mode, the

frequency changes one step at a time. In the

quick tuning mode, you can quickly tune the

desired frequency.

3. Press the [x] or [v] button to tune in the

desired station.

1. Press the [BND] button and select the

Tuning

desired band (FM or AM (MW/LW)).

There are 3 types of tuning mode available,

seek tuning, manual tuning and preset tuning.

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning

is now available.

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

2. Tune into a station.

● Quick tuning

Press and hold the [x] or [v] button for 1

DX SEEK can automatically tune in to

receivable broadcast stations; LOCAL SEEK

can tune in to only broadcast stations with a

good reception sensitivity.

second or longer to tune in a station.

● Step tuning

Press the [x] or [v] button to manually tune

in a station.

1. Press the [BND] button and select the

desired band (FM or AM (MW/LW)).

∗ If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

2. Tune into a station.

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek

tuning is now available.

∗ If “TA” is lit in the display, TP stations are

automatically sought.

● DX SEEK

Press the [x] or [v] button to automatically

seek a station.

When the [v] button is pressed, the station is

sought in the direction of higher frequencies; if

the [x] button is pressed, the station is sought

in the direction of lower frequencies.

∗ When seek tuning starts, “DX” appears in the

display.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operations

Recalling a preset station

Preset scan

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for a desired station in memory.

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio

stations in memory. Press the corresponding

[DIRECT] button or the [w] / [z] button to

recall the stored radio frequency automatically.

1. Press the [

2. When a desired station is tuned in, press the

] button again to continue receiving that

station.

Note:

• Be careful not to press and hold the [

] button.

1. Press the [BND] button and select the

[

desired band (FM or AM (MW/LW)).

2. Press the corresponding [DIRECT] button or

the [w] / [z] button to recall the stored

station.

] button

for 2 seconds or longer, otherwise the auto store

function is engaged and the unit starts storing

stations.

Note:

• Press and hold one of the [DIRECT] buttons for 2

seconds or longer to store that station into preset

memory.

Manual memory

1. Select the desired station with seek tuning or

manual tuning.

2. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

Auto store

Auto store is a function for storing up to 6

stations that are automatically tuned in

sequentially. If 6 receivable stations cannot be

received, a previously stored station remains

unoverwritten at the memory position.

1. Press the [BND] button and select the

desired band (FM or AM (MW/LW)).

2. Press and hold the [

] button for 2 seconds

or longer. The stations with good reception

are stored automatically to the preset

channels.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

Radio Data System Operations

4. Press the [DISP] button to return to the

Radio Data System

This unit has a built-in “Radio Data System”

decoder system that supports broadcast

stations transmitting “Radio Data System” data.

previous mode.

∗ If the reception of the current broadcast station

deteriorates, “PISEARCH” appears in the display

and the radio searches for the same programme

on another frequency.

This system can display the name of the

broadcast station being received (PS) and can

automatically switch to the broadcast station

with the best reception as you move long

distances (AF switching).

REG (Regional programme)

function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for that

region is received.

∗ The factory default setting is “OFF”.

Notes:

• This function is disabled when a national station

such as BBC R2 is being received.

• The REG function ON/OFF setting is valid when

the AF function is ON.

Also, if a traffic announcement or programme

type is broadcast from an “Radio Data System”

station, no matter what mode you are in, this

broadcast is received.

Additionally, if EON information is received, this

information enables automatic switching of other

preset stations on the same network and

interruption of the station being received with

traffic information from other stations (TP). This

function is not available in some areas.

When using the “Radio Data System” function,

always set the radio to FM mode.

1. Press and hold the [DISP] button for 1

second or longer to switch to the “Radio Data

System” adjustment selection display.

• AF

• PS

: Alternative Frequency

: Programme Service Name

2. Press the [x] or [v] button to select

“REG”.

3. Press the [w] or [z] button to select “ON” or

“OFF”.

• PTY : Programme Type

• EON : Enhanced Other Network

• TP

: Traffic Programme

∗ “Radio Data System” interrupt does not function

during AM radio reception or in TV mode.

∗ When set receives “Radio Data System” signal,

and can read PS data, PS appears in the display.

• ON:

“REG” in the display lights and REG function

turns on.

• OFF:

“REG” in the display goes off and REG

function turns off.

AF function

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

4. Press the [DISP] button to return to the

previous mode.

∗ The factory default setting is “ON”.

1. Press and hold the [DISP] button for 1

second or longer to switch to the “Radio Data

System” adjustment selection display.

2. Press the [x] or [v] button to select

“AF”.

3. Press the [w] or [z] button to select “ON” or

“OFF”.

• ON:

“AF” in the display lights and AF function

turns on.

• OFF:

“AF” in the display goes off and AF function

turns off.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Data System Operations

Manually tuning a regional station

in the same network

1. This function is valid when the AF function is

ON and the REG function is OFF.

Auto store function for TP stations

You can automatically store up to 6 TP stations

into preset memory. If the number of TP can be

received less than 6, broadcast stations already

stored in memory and left without being

overwritten.

Note:

• This function can be used when a regional

broadcast of the same network is received.

As “TA” lit in the display, press and hold the

[

] button for 2 seconds or longer. The TP

2. Press any one of the [DIRECT] buttons to

stations with the good reception sensitivity are

stored into preset memory.

∗ Even if you select FM1 or FM2, a TP station is

stored into memory for FM3.

call out the regional station.

3. If the reception condition of the called out

station is bad, press the [DIRECT] button of

the same number. The unit receives a local

station on the same network.

PTY (Programme Type)

This function enables you to listen to a

broadcast of the selected programme type even

if the unit is on a function mode other than radio.

∗ Some countries do not yet have PTY broadcast.

∗ In the TA standby mode, a TP station has priority

over a PTY broadcast station.

TA (Traffic Announcement)

In the TA standby mode, when a traffic

announcement broadcast starts, the traffic

announcement broadcast is received as top

priority regardless of the function mode so you

can listen to it. Traffic programme (TP)

automatic tuning is also possible.

∗ The factory default setting is “OFF”.

1. Press and hold the [DISP] button for 1

second or longer to switch to the “Radio Data

System” adjustment selection display.

∗ This function can only be used when “TP” is lit in

the display. When “TP” is lit, this means that the

“Radio Data System” broadcast station being

received has traffic announcement programmes.

2. Press the [x] or [v] button to select

“PTY”.

● Setting the TA standby mode

If you press the [TA] button when only “TP” is lit

in the display, “TP” and “TA” light in the display

and the unit is set into the TA standby mode

until a traffic announcement is broadcast. When

a traffic announcement broadcast starts, “TRA

INFO” appears in the display. If you press the

[TA] button while a traffic announcement

broadcast is being received, the traffic

3. Press the [w] or [z] button to select “ON”

or “OFF”.

• ON:

“PTY” in the display lights and PTY standby

mode is turned on. When the selected PTY

broadcast starts, the PTY item name

appears in the display.

• OFF:

announcement broadcast reception is cancelled

and the unit goes into the TA standby mode.

“PTY” in the display goes off and PTY

standby mode is cancelled.

● Cancelling the TA standby mode

As “TP” and “TA” lit in the display, press the [TA]

button. The “TA” in the display goes off and the

TA standby mode is cancelled.

4. Press the [DISP] button to return to the

previous mode.

● Cancelling a PTY interrupt broadcast

Press the [TA] button during the PTY interrupt

broadcast, the PTY interrupt is cancelled and

the unit returns to PTY standby mode.

∗ If “TP” is not lit, pressing the [TA] button searches

for a TP station.

● Searching for a TP station

When “TP” is not lit, if you press the [TA] button,

“TA” in the display lights and the unit

automatically receives a TP station.

Note:

• If a TP station is not received, the unit continues

the search operation. Pressing [TA] button again

goes off “TA” in the display and stops TP station

searching.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

Radio Data System Operations

Selecting PTY

1. Press and hold the [DISP] button for 1

second or longer to switch to the “Radio Data

System” adjustment selection display.

4. Press the [w] or [z] button to select the

desired PTY.

The 29 types of PTY below can be selected.

5. If you press and hold any one of the

[DIRECT] buttons for 2 seconds or longer,

the selected PTY is stored into that preset

channel memory.

2. Press the [x] or [v] button to select

“PTY-SEL”.

3. Press the [

] button.

PTY item

4. Press any one of the [DIRECT] buttons.

Alternatively, press the [w] or [z] button to

select the desired PTY.

ENGLISHe

NEWSa

ContentsA

News

5. Press the [DISP] button to return to the

AFFAIRSa

INFOa

Today’s events

Information

Sports

previous mode.

∗ Below are the factory default settings stored

for the [DIRECT] buttons.

SPORTa

PTY item

Preset

number

EDUCATEa

DRAMAa

Education

Drama

ENGLISHd ContentsA

NEWSb

INFO

News

CULTUREa

SCIENCEa

VARIEDa

POP Ma

Culture

Information

Pop Music

Sports

Science

POP M

SPORT

Variety

Pop music

Rock music

Easy music

Light music

Classics

CLASSICS Serious Classical Music

EASY M Easy Listening Music

ROCK Ma

EASY Ma

LIGHT Ma

CLASSICSa

OTHER Ma

WEATHERa

FINANCEa

CHILDRENa

SOCIALa

RELIGIONa

PHONE INa

TRAVELa

LEISUREa

JAZZa

∗ The PTY select mode is cancelled

automatically 7 seconds after a PTY is

selected.

Other music

Weather

Finance

PTY seek

1. Press and hold the [DISP] button for 1

second or longer to switch to the “Radio Data

System” adjustment selection display.

For children

Social

2. Press the [x] or [v] button to select

“PTY-SEL”.

Religion

Phone in

Travel

3. Press the [

] button.

4. Press the [v] button to search for a PTY

broadcast in the direction of higher

Leisure

frequencies; press the [x] button to search

in the direction of lower frequencies.

Jazz

COUNTRYa

NATION Ma

OLDIESa

Country

∗ If no station with the selected PTY broadcast

can be received, the unit returns to the PTY

select mode.

Nation music

Oldies

FOLK Ma

DOCUMENTa

Folk music

Documentaries

PTY preset memory

1. Press and hold the [DISP] button for 1

second or longer to switch to the “Radio Data

System” adjustment selection display.

2. Press the [x] or [v] button to select

“PTY-SEL”.

3. Press the [

] button.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Data System Operations

Emergency broadcast

If an emergency broadcast is received, all the

function mode operations are stopped.

“ALARM” appears in the display and the

emergency broadcast can be heard.

Volume setting of TA, emergency

broadcast (Alarm) and PTY

The volume for TA, Alarm and PTY interrupts

can be set during TA, Alarm or PTY interrupt.

∗ The factory default setting is “15”.

● Cancelling an emergency broadcast

If you press the [TA] button, emergency

broadcast reception is cancelled.

During a TA, Alarm or PTY interrupt, turn the

[ROTARY] knob to set the volume to the desired

level (0 to 33).

∗ When the TA, Alarm or PTY interrupt ends, the

volume returns to the level it had before the

interrupt.

Switching the PTY display language

You can select one of 4 languages (English,

German, Swedish or French) for the PTY

displayed in the display.

∗ The factory default setting is “ENGLISH”.

1. Press and hold the [DISP] button for 1

second or longer to switch to the adjustment

selection display.

2. Press the [x] or [v] button to select

“LANGUAGE”.

3. Press the [w] or [z] button to select the

desired language.

4. Press the [DISP] button to return to the

previous mode.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

CD/MP3/WMA/AAC Operations

What is AAC?

MP3/WMA/AAC

• AAC is an acronym for “Advanced Audio

Coding” and refers to the audio compression

method used with video compression

standards MPEG-2 and MPEG-4.

What is MP3?

MP3 is an audio compression method and

classified into audio layer 3 of MPEG standards.

This audio compression method has penetrated

into PC users and become a standard format.

• AAC files composed with the following

conditions can be played:

This MP3 features the original audio data

compression to about 10 percent of its initial

size with a high sound quality. This means that

about 10 music CDs can be recorded on a CD-R

disc or CD-RW disc to allow a long listening time

without having to change CDs.

- AAC files encoded with iTunes.

- iTunes Ver. 7.0 or earlier.

- File extension “.m4a” (“.M4A”)

• Tracks purchased at an iTunes Music store,

and copyright-protected files cannot be

played.

• When playing AAC files that include image

data, additional time may be required before

playback begins.

What is WMA?

WMA is the abbreviation of Windows Media

Audio, an audio file format developed by

Microsoft Corporation.

• Files may not play properly, depending on the

iTunes version under which an AAC file is

encoded.

Notes:

• If you play a file with DRM (Digital Rights

Management) for WMA remaining ON, no audio

is output (The WMA indicator blinks).

Precautions when creating MP3/

• Windows Media™, and the Windows ® logo are

trademarks, or registered trademarks of

Microsoft Corporation in the United States and/or

other countries.

WMA/AAC file

● Usable sampling rates and bit rates

1. MP3: Sampling rate 8 kHz-48 kHz,

Bit rate 8 kbps-320 kbps / VBR

2. WMA: Bit rate 8 kbps-320 kbps

3. AAC: Sampling rate 8 kHz-48 kHz,

Bit rate 8 kbps-320 kbps / VBR

● To disable DRM (Digital Rights

Management)

1. When using Windows Media Player 9/10/11,

click on TOOL ➜ OPTIONS ➜ MUSIC

RECORD tab, then under Recording

settings, unclick the Check box for RECORD

PROTECTED MUSIC. Then, reconstruct

files.

● File extensions

1. Always add a file extension “.MP3”, “.WMA”

or “.M4A” to MP3, WMA or AAC file by using

single byte letters. If you add a file extension

other than specified or forget to add the file

extension, the file cannot be played.

Personally constructed WMA files are used

at your own responsibility.

2. Files without MP3/WMA/AAC data will not

play. The indication “NO FILE” appears in

the play time display if you attempt to play

files without MP3/WMA/AAC data.

∗ When VBR files are played, the play time display

may differ the play location.

∗ When MP3/WMA/AAC files are played, a little no

sound part is caused between tunes.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA/AAC Operations

● Logical format (File system)

Set the type of file to be played

(multi-session function)

When a single disc holds both normal CD type

tracks and MP3/WMA/AAC type tracks, use this

command to select which type of track to play.

1. When writing MP3/WMA/AAC file on a CD-R

disc or CD-RW disc, please select “ISO9660

level 1, 2 or JOLIET or Romeo” or APPLE

ISO as the writing software format. Normal

play may not be possible if the disc is

recorded on another format.

∗ Default setting is “M-SESS CD”.

• When only one type of track (either music CD

or MP3/WMA/AAC) is recorded on a disc,

selecting either type will allow playback of the

disc.

2. The folder name and file name can be

displayed as the title during MP3/WMA/AAC

play but the title must be within 64 single

byte alphabetical letters and numerals

(including an extension).

• When playing CCCD (copy-control CDs), set

to CD type.

3. Do not affix a name to a file inside a folder

having the same name.

1. Press and hold the [BND] button for 1

second or longer.

● Folder structure

Each time the button is held pressed in this

way, “M-SESS” will be displayed for 1

second, then “CD” or “MP3” appears in the

display, the playback type alternates

1. A disc with a folder having more than 8

hierarchical levels will be impossible.

● Number of files or folders

1. Up to 255 files can be recognized per folder.

Up to 510 files can be played.

between CD type and MP3/WMA/AAC type.

• “M-SESS CD”

When playing music CD only.

2. Tracks are played in the order that they were

recorded onto a disc. (Tracks might not

always be played in the order displayed on

the PC.)

• “M-SESS MP3”

When playing music MP3/WMA/AAC only.

2. When setting is completed, remove the disc

and reinsert it.

3. Some noise may occur depending on the

type of encoder software used while

recording.

Backup Eject function

Just pressing the [Q] button, ejects the disc

even if the power to the unit was not turned on.

1. Press the [Q] button. Remove the disc after

it is ejected.

Notes:

• If you force a CD into before auto reloading, this

can damage the CD.

• If a CD (12 cm) is left in the ejected position for

15 seconds, the CD is automatically reloaded

(Auto reload).

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

CD/MP3/WMA/AAC Operations

Listening to a disc already loaded in

the unit

Press the [SRC] button to select the CD/MP3/

WMA/AAC mode.

Displaying CD titles

This unit can display title data for CD-text/MP3/

WMA/AAC disc and user titles input with this

unit.

1. Each time you press the [DISP] button to

When the unit enters the CD/MP3/WMA/AAC

mode, play starts automatically.

change the title display.

● CD-TEXT disc

User ➜ Track ➜ Disc ➜ Artist ➜ User ...

If there is no disc loaded, the indication “NO

DISC” appears in the title display.

● MP3/WMA/AAC disc

Track ➜ Folder ➜ Title ➜ Album ➜ Artist ➜

Track ...

The mode changes each time the [SRC] button

is pressed. (Modes are not displayed for

equipment that is not connected.)

Notes:

Radio ➜ CD/MP3/WMA/AAC ➜ USB/MTP/

iPod ➜ (TEL) ➜ (CD changer) ➜ AUX ➜

Radio ...

• If the CD playing is not a CD-text CD or no user

title has been input, “NO TITLE” appears in the

display.

• If MP3/WMA/AAC disc is not input TAG, “NO

TITLE” appears in the display.

• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.

• Tag displays give priority to V2.3 / 2.2.

• In the case of album Tags for WMA, the

information written into the extension header is

displayed.

Loading a CD

1. Insert a CD into the center of the CD SLOT

with the labeled side facing up. The CD plays

automatically after loading.

Notes:

• Never insert foreign objects into the CD SLOT.

• If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may

require service.

• Only ASCII characters can be displayed in Tags.

Selecting a track

● Track-up

• Discs not bearing the

mark and

CD-ROMs cannot be played by this unit.

1. Press the [v] button to move ahead to the

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

beginning of the next track.

2. Each time you press the [v] button, the

track advances ahead to the beginning of the

next track.

Pausing play

1. Press the [

] button to pause play.

● Track-down

“PAUSE” appears in the display.

1. Press the [x] button to move back to the

2. To resume CD play, press the [

again.

] button

beginning of the current track.

2. Press the [x] button twice to move back to

the beginning of the previous track.

Fast-forward/fast-backward

● Fast-forward

1. Press and hold the [v] button for 1 second

or longer.

● Fast-backward

1. Press and hold the [x] button for 1 second

or longer.

∗ For MP3/WMA/AAC discs, it takes some time

until the start of searching and between tracks. In

addition, the playing time may have a margin of

error.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA/AAC Operations

Folder Select

This function allows you to select a folder

containing MP3/WMA/AAC files and start

playing from the first track in the folder.

● Folder repeat play

This function allows you to play a track currently

being played in the MP3/WMA/AAC folder

repeatedly.

1. Press and hold the [RPT] button for 1 second

1. Press the [z] or [w] button.

or longer to perform folder repeat play.

Press the [w] button to move the next folder.

Press the [z] button to move the previous

folder.

“ALL RPT” appears in the display for 2

seconds.

● Random play

This function allows you to play all tracks

recorded on a disc in a random order.

2. To select a track, press the [x] or [v]

button.

1. Press the [RDM] button to perform random

Top function

The top function resets the CD player to the first

track of the disc. Press the [BND] button to play

the first track (track No. 1) on the disc.

play.

“RANDOM” appears in the display for 2

seconds.

● Folder random play

∗ In case of MP3/WMA/AAC, the first track of a

folder being played will be returned.

This function allows you to play all the tracks of

all the folders recorded on an MP3/WMA/AAC

disc in a random order.

Other various play functions

● Scan play

This function allows you to locate and play the

first 10 seconds of all the tracks recorded on a

disc.

1. Press and hold the [RDM] button for 1

second or longer to perform folder random

play.

“ALL RDM” appears in the display for 2

seconds.

1. Press the [SCN] button to perform scan play.

● To cancel play

1. Press the operating button previously

selected.

∗ The various play mode is canceled and the

various play off mode appears in the display for 2

seconds.

“SCAN” appears in the display for 2

seconds.

∗ Scan play starts from the next track after the

track currently being played.

● Folder scan play

This function allows you to locate and play the

first 10 seconds of the first track of all the folders

on an MP3/WMA/AAC disc.

1. Press and hold the [SCN] button for 1

second or longer to perform folder scan play.

“ALL SCAN” appears in the display for 2

seconds.

∗ Folder scan play starts from the next folder

after the folder currently being played.

● Repeat play

This function allows you to play the current track

repeatedly.

1. Press the [RPT] button to perform repeat

play.

“REPEAT” appears in the display for 2

seconds.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

Operations Common to Each Mode

Each time you press the [w] or [z] button,

To change adjustment setting

the setting changes in the following order:

“MESSAGE” ↔ “ON” ↔ “OFF”

1. Press and hold the [DISP] button for 1

second or longer to switch to the

adjustment selection display.

● Entering message information

Message up to 30 characters long can be stored

in memory and displayed as a type of screen

saver setting.

2. Press the [x] or [v] button to select

the “item name”.

∗ The factory default setting is “WELCOME TO

CLARION”.

2-1. Select “MSG INP”.

“SETTINGS” ↔ “SCRN SVR” ↔ “MSG

INP” ↔ “SCROLL” ↔ “DIMMER” ↔ “A-

CANCEL” ↔ “TEL-SEL” ↔ “TEL-SP” ↔

“TEL-SW” ↔ “S-CHECK”

3-1. Press the [

] button.

3-2. Press and hold the [BND] button for 1

3. Press the [w] or [z] button to select the

“desired setting value”.

second or longer to clear the old message.

∗ In the case of display blinking “ENT”, you

3-3. Press the [x] or [v] button to move the

can press the [

setting value.

] button to adjust the

cursor.

3-4. Press the [BND] button to select a

character type. Each time you press the

[BND] button, the character type changes

in the following order:

∗ After completing settings, press the [DISP]

button to return to the previous mode.

● Displaying the settings

Capital letters ➜ Numbers ➜ Symbols ➜

Umlaut ➜ Capital letters…

The number of indicator of this unit decreases,

you can see the state of current settings at any

operation mode.

3-5. Press the [w] or [z] button to select the

desired character.

2-1. Select “SETTINGS”.

3-6. Repeat step 3-3 to 3-5 to enter up to 30

characters for message.

3-1. Press the [w] or [z] button to display the

state of current settings.

3-7. Press and hold the [

] button for 2

∗ When the setting is selected, after 1 second

the current state will be displayed.

seconds or longer to store the message in

memory.

∗ Press and hold the [BND] button for 1

second or longer to cancel the input

For example:

after 1 second,

message. Then press and hold the [

]

button for 2 seconds or longer to store the

message and the message return to default

setting.

● Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA/AAC

title.

∗ The factory default setting is “ON”.

2-1. Select “SCROLL”.

● Turning the screen saver function on

or off

This unit is provided with the screen saver

function which allows you to show various kinds

of patterns and characters in the operation

status indication area of the display in a random

order. You can turn on or off this function. If the

button operation is performed with the screen

saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

3-1. Press the [w] or [z] button to select “ON”

or “OFF”.

• ON:

To scroll automatically.

• OFF:

To scroll just 1 time.

∗ When you want to see the title again, in the

title mode, press and hold the [DISP] button

for 3 seconds or longer to scroll the title.

∗ The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [w] or [z] button to select the

setting.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

● Setting the dimmer control

You can set the dimmer control “ON” or “OFF”.

∗ The factory default setting is “ON”.

2-1. Select “DIMMER”.

● Setting the car speaker output for the

cellular phone

∗ The factory default setting is “RIGHT”.

∗ To output the telephone calls, set the cellular

phone interrupt to “ON”.

3-1. Press the [w] or [z] button to select “ON”

or “OFF”.

2-1. Select “TEL-SP”.

3-1. Press the [w] or [z] button to select

“RIGHT” or “LEFT”.

● Setting the external amplifier

∗ The factory default setting is “OFF”.

2-1. Select “A-CANCEL”.

• RIGHT:

Telephone calls can be heard on the front

right speaker connected to this unit.

3-1. Press the [w] or [z] button to select “ON”

or “OFF”.

• LEFT:

• ON:

Telephone calls can be heard on the front

left speaker connected to this unit.

Use with connected AMP.

• OFF:

Use with inside AMP.

● Cellular phone interrupt setting

If you connect this unit and your cellular phone

with a separately sold cable, you can listen to

your telephone calls on your car speakers.

● Set the cellular phone connection

mode (AUX/CeNET)

You can listen to your telephone calls from the

speakers connected to this unit.

∗ The factory default setting is “OFF”.

2-1. Select “TEL-SW”.

∗ The factory default setting is “AUX”.

2-1. Select “TEL-SEL”.

3-1. Press the [w] or [z] button to select the

setting. Each time you press the [w] or

[z] button, the setting changes in the

following order:

3-1. Press the [w] or [z] button to select

“AUX” or “CENET”.

• AUX:

“OFF” ↔ “ON” ↔ “MUTE”

AUX input jack in front panel is for cellular

phone audio input, when the AUX input

jack is used to connect an AUX

BLUETOOTH BB (BLT373) (sold

separately).

• OFF:

This unit continues normal operation even

when the cellular phone is used.

• ON:

You can listen to your telephone calls from

the speakers connected to this unit.

• CeNET:

CeNET input cable is for cellular phone

audio input, when a CeNET cable is used

to connect a cellular phone (BLT583) (sold

separately). See “Bluetooth BB

Operations” (page 34-36) for details.

∗ When listening to your calls on your car

speakers, you can adjust the volume by

turning the [ROTARY] knob.

• MUTE:

The sound from this unit is muted during

telephone calls.

Note:

• If connecting a hands-free kit, please ensure the

setting is ON to receive the telephone audio

through the system.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

Operations Common to Each Mode

● Performing a system check

This function allows you to perform a system

check from the adjust mode when required.

Clearing titles

1. Select and play a CD in the CD changer for

which you want to clear the title.

2-1. Select “S-CHECK”.

2. Press and hold the [DISP] button for 1

3-1. Press and hold the [

second or longer.

] button for 1

second or longer.

3. Press the [x] or [v] button to select

“TITLE IN”.

“S-CHECK” appears in the display, then

the unit returns to the previous operation

mode.

4. Press the [

] button.

The display switches to the title input display.

5. Press and hold the [BND] button for 1

Entering titles

second or longer.

Titles up to 8 characters long can be stored in

memory and displayed for CD and CD changer.

The number of titles that can be entered for

each mode are as follows.

All characters in the title disappear.

6. Press and hold the [

] button for 2 seconds

or longer to store the setting.

Mode

Number of titles

AUX function

CD mode

50 titles

This system has an external input jack on the

front panel so you can listen to sounds and

music from external devices connected to this

unit.

CD changer mode

Number of titles

DCZ628 connected

100 titles

● Selecting AUX IN sensitivity

Make the following settings to select the

sensitivity when sounds from external devices

connected to this unit are difficult to hear even

after adjusting the volume.

1. Press the [SRC] button to select the mode

you want to enter a title (CD or CD changer).

2. Select and play a CD in the CD changer for

which you want to enter the title.

3. Press and hold the [DISP] button for 1

∗ The factory default setting is “MID”.

1. Press and hold the [DISP] button for 1

second or longer.

4. Press the [x] or [v] button to select

“TITLE IN”.

second or longer.

2. Select “AUX SENS”.

5. Press the [

] button.

3. Press the [w] or [z] button to select

“HIGH”, “MID” or “LOW”.

Note:

• When AUX mode is selected, AUX IN sensitivity

can be set.

The display switches to the title input display.

6. Press the [x] or [v] button to move the

cursor.

7. Press the [BND] button to select a character

type. Each time you press the [BND] button,

the character type changes in the following

order:

Capital letters ➜ Numbers ➜ Symbols ➜

Umlaut ➜ Capital letters…

8. Press the [w] or [z] button to select the

desired character.

9. Repeat steps 6 to 8 to enter up to 8

characters for the title.

10.Press and hold the [

] button for 2 seconds

or longer to store the title into memory.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

7. ACCESSORIES

USB/MTP Operations

• USB memory devices with security functions

cannot be played.

USB memory/MTP device operation

Note:

• The order in which tracks are recorded may

differ depending on the USB memory device

connected (the actual playback order may not

be the same as that indicated on your

computer’s display).

• The following operations are the same as for CD

mode:

∗Pause

∗Track selection

∗Fast-forward/fast-backward (Except DRM file)

∗Top function

• If you continuously operate folder up/down,

the play time keeps as “00:00”, and the sound

is not emitted.

∗Scan play

∗Repeat play

∗Random play

∗Folder selection

About USB Digital Media Streaming

This unit supports USB Digital Media Streaming.

USB Digital Media Streaming is a function used

to play music files transmitted using Media

Transfer Protocol (MTP). This function also

supports the playback of WMDRM 10 files.

See “CD/MP3/WMA/AAC Operations” (page 23-

26) for details.

About USB memory

• USB is an acronym for Universal Serial Bus,

and refers to an external bus standard

During USB Digital Media Streaming, the unit

displays the “MTP” mode indicator.

supporting data transfer rates of 12 Mbps.

Use of USB Digital Media Streaming requires

the purchase of a supported portable audio

player. For information regarding supported

portable audio players, consult your nearest

Clarion dealer, or visit Clarion's website.

• This unit is compatible with USB 1.1/2.0 with

maximum data transfer rates of 12 Mbps.

• USB memory devices that can be played by

connecting to the unit’s USB cable are limited

to those recognized as “USB mass storage

class devices”; operation is not guaranteed

with all USB memory devices.

CAUTION

∗ Devices compatible with “USB Mass Storage

Class” can be used merely by connecting to

the host device, without need for special

drivers or application software.

• Insert and remove a USB memory/MTP

device only when the device is not being

accessed. Connecting or disconnecting

the device at the following times may

result in the loss of data:

• Consult the manufacturer of your USB

memory device for information regarding

whether it is supported by “USB Mass

Storage Class” standards.

- If the USB memory/MTP device is

removed or power is disconnected

during writing to the device.

- When the device is subjected to static

electricity or electric noise.

• Audio files playable on this unit are limited to

MP3/WMA/AAC files. For details, see the

section “MP3/WMA/AAC” (page 23).

• Do not leave a USB memory/MTP device

unattended in an automobile. Exposure to

direct sunlight or high temperatures may

cause deformation or other malfunction of

the USB memory/MTP device.

• To prevent the accidental loss of data, always

back up important data on your computer.

• This unit does not support connections to a

computer. In addition, connections made

through a USB hub device are also not

supported.

• When a USB memory device is composed of

two or more drives, only one of the drives will

be detected.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

USB/MTP Operations

Connecting a USB memory/MTP

device

1. Connect the USB memory/MTP device to the

USB slot.

To listen to tracks on a connected

USB memory/MTP device

1. Press the [SRC] button to switch the source.

When USB memory/MTP device is selected,

playback (except DRM files) will begin from

the location at which playback was

previously stopped.

Playback will begin from the first file

recorded on the device.

CAUTION

Do not turn on vehicle ignition when the MTP

device is connected, since it may result in

loss or damage to data on the MTP device.

Connect the MTP device to the USB slot after

vehicle ignition is turned on.

∗ When a USB memory/MTP device is

connected the USB/MTP mode will be

displayed.

∗ When a USB memory/MTP device is

disconnected and then reconnected, playback

will begin from the beginning of the USB

memory/MTP device.

∗ When “MTP” mode is selected, AAC files on

the MTP device cannot be played.

To stop play

1. Press the [SRC] button and switch the

function to a source other than the USB

memory/MTP.

CAUTION

Do not remove the USB memory/MTP device

when the USB/MTP mode is selected, since it

may result in loss or damage to data on the

USB memory/MTP device.

Confirm the proper

orientation of the

connector before

inserting.

Always backup and save important data on

your computer.

∗ If the device is not recognized, press the

[SRC] button to switch the source to the

device.

∗ Always insert the device fully into the

connector. Incomplete connections may

cause the device not to be recognized.

2. Remove the USB memory/MTP device from

the USB slot.

∗ Depending on the number of tracks recorded,

some amount of time may be required until all

tracks are read into the unit.

∗ The order in which tracks are recorded may

differ depending on the device connected (the

actual playback order may not be the same as

that indicated on your computer’s display).

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

iPod Operations

Note:

This section describes operations when

connected to an Apple iPod via the USB slot.

• The following operations in Play mode operate

the same as in CD mode:

Notes:

∗Track selection: [x], [v]

• See the iPod Owner’s Manual for details

regarding operation conditions.

• The unit will not operate, or may operate

improperly with unsupported versions.

∗Fast-forward/fast-backward: [x], [v]

∗Pause: [

]

∗Top function: [BND]

• For a list of compatible Apple iPod unit with the

this model, please contact your Clarion dealer or

www.clarion.com.

See “CD/MP3/WMA/AAC Operations” (page 23-

26) for details.

Other various play functions

(in Play mode)

Notes:

• These functions are not supported when in the

iPod menu mode.

• The Random function set on the iPod remains the

same after attachment/detachment of the iPod.

• The Repeat function on the iPod will be changed

when you connect/disconnect the iPod to the

unit.

Connecting an iPod

When an iPod is connected to the USB slot,

“Shuffle” set on the iPod will become as follows:

• “Shuffle (Albums)” play ➜ Random play

• “Shuffle (Songs)” play ➜ All random play

The iPod has two modes, the “Play mode” and

the “iPod menu mode” for selecting tracks.

Switch between these modes by pressing the

[BND] button for 1 second or longer.

● Repeat play

Note:

Play back one track repeatedly.

• To connect iPod, please use the USB cable

attached in iPod.

1. Press the [RPT] button.

● Random play

Select iPod mode

1. Press the [SRC] button.

Play all albums within a selected category, in

random order. (Corresponds to “Shuffle

(Albums)” command on iPod.)

Playback will begin from the last file that was

played on the iPod.

1. Press the [RDM] button.

● All random play

Play all tracks within a selected category, in

random order. (Corresponds to “Shuffle

(Songs)” command on iPod.)

1. Press and hold the [RDM] button for 1

second or longer.

● To cancel play

1. Press the same play button once again.

iPod cable

Notes:

Confirm the proper

orientation of the iPod

connector before

inserting.

• When the repeat play mode is canceled, after

play all tracks within a selected category,

playback will begin from the first track in the

selected category.

• When playing the last track within a selected

category in Random mode, if ACC is switched off

then on again, playback will begin from a

different track.

• Though the default setting of an iPod is “All

Repeat”, the indication on the mode status is not

displayed.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

iPod Operations

Selecting category from the iPod

1. Press and hold the [BND] button for 1

second or longer to select the iPod menu

mode.

Selecting category using preset

memory

1. Press and hold the [BND] button for 1

second or longer to select the iPod menu

mode.

The iPod menu categories will be displayed.

The category can be set as follows in the

[DIRECT] (1-6) buttons.

Notes:

[1] : PLAYLIST

[2] : ARTIST

[3] : ALBUM

[4] : SONG

• Repeat and Random mode operations are not

supported when in the iPod menu mode.

• In iPod menu mode, if you press the [x]/[v]

or [w]/[z] button fast, playback may not be

performed.

[5] : GENRE

[6] : COMPOSER

2. Press the [w] or [z] button to switch

between categories.

The iPod menu categories alternate in the

following order:

2. Press the desired [DIRECT] (1-6) button to

select the category.

“PLAYLIST” ↔ “ARTIST” ↔ “ALBUM” ↔

“SONG” ↔ “GENRE” ↔ “COMPOSER”...

∗ Subfolders may be displayed, depending on

the category.

In this case, use the [w] and [z] buttons to

switch between subfolders, then use the [v]

button to select the desired subfolder.

Note:

The iPod menu mode can be canceled by

performing one of the following operations:

• Press the [BND] button.

3. When the track name display is showing,

press the [v] button.

• When the category select screen is displayed,

Playback will begin from the first track in the

selected category, and the iPod menu mode

will be canceled.

press the [v] button.

3. Press the [v] button to select the category.

4. When the track name display is showing,

∗ Use the [w] and [z] buttons to select a track

press the [v] button.

Playback will begin from the first track in the

selected category, and the iPod menu mode

will be canceled.

within a category.

About title display

This unit supports the display of title information

transmitted from a connected iPod.

∗ Subfolders may be displayed, depending on

the category.

• Character code information is UTF-8;

displayable characters include English

alphanumerics, some symbols, and some

umlaut characters.

In this case, use the [w] and [z] buttons to

switch between subfolders, then use the [v]

button to select the desired subfolder.

∗ When the track name display is showing,

pressing the [x] button will return to the

currently playing folder name display.

• Unsupported characters will be replaced by

asterisks (*).

5. Use the [w] and [z] buttons to select a

track within a category.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Bluetooth BB Operations

The CeNET Bluetooth interface adapter

(BLT583) allows you to utilize your car’s built-in

audio system for wireless mobile phone

handsfree communication.

● Call from Phonebook

User can search the contact name in the

phonebook and make call.

Alternatively, user can call from mobile phone.

The car stereo with BLT583 installed will be able

to retrieve phonebook contacts, received call,

dialed call, missed call, incoming and outgoing

calls.

1. Press the [BND] button to select “PHONE

BOOK”.

2. Press the [v] button to enter the contact

name mode (In this case, use the [w], [z]

button to select the desired contact name).

For details, consult the owner’s Manual

provided with your CeNET Bluetooth interface

adapter.(Hereinafter, CeNET Bluetooth

interface adapter is abbreviated as Bluetooth

BB.)

3. When the contact name is displayed, press

the [v] or [x] button to select the contact

name’s phone number.

4. Press the [

phone No.

] button to call the mobile

Basic Operations

∗ Press the [SOUND] button to end the call.

● Answering a call

1. You can answer an incoming call by pressing

any button.

Select Bluetooth BB

1. Press the [SRC] button to switch the source.

∗ Press the [SOUND] button to reject an

incoming call.

Making a call

There are 2 ways to make outgoing call.

● Received/Dialled/Missed Call History

You can search any Received/Dialled/Missed

Call History.

● Direct Number Call

Outgoing call can be made by entering

telephone numbers directly via the car stereo.

1. Press the [BND] button to select “RECEIVED

CALL”, “DIALLED CALL” or “MISSED

CALL”.

Telephone number uses 0, 1, 2, 3, 4, 5, 6, 7, 8,

9, *, #, and +.

2. Press the [v] button to enter the contact

name mode (In this case, use the [w], [z]

button to select the desired contact name).

1. Press the [BND] button to select “DIAL

NUMBE”.

2. Press the [

] button.

3. When the contact name is displayed, press

the [x] or [v] button to select the contact

name’s phone number.

3. Press the [x] or [v] button to move the

cursor.

4. Press the [w] or [z] button to select the

4. Press the [

phone No.

] button to call the mobile

numbers.

5. Press and hold the [

] button for 1 second

or longer to call the mobile phone No.

∗ Press the [SOUND] button to end the call.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

Bluetooth BB Operations

● PAIR SPECIAL

To change Bluetooth adjustment

setting

This is used for pairing special Bluetooth device

which cannot carry out pairing in usual pairing

mode.

1. Press and hold the [DISP] button for 1

second or longer to switch to the Bluetooth

adjustment selection display.

Please use this pairing mode if your Bluetooth

device is listed in the menu.

2-1. Select “PAIR SPECIAL”.

2. Press the [x] or [v] button to select

the “item name”.

3-1. Press the [

] button, the special

Bluetooth device is listed in the display.

“PAIRING” ↔ “PAIR SPECIAL” ↔

“SELECT” ↔ “DELETE” ↔ “MIC GAIN” ↔

“RING VOL” ↔ “AUTO ANS” ↔

“REFUSE” ↔ “A-CONECT” ↔ “PIN

CODE” ↔ “ADDRESS” ↔ “VERSION” ↔

“PAIRING”…

4-1. Press the [w] or [z] button to select the

desired special Bluetooth device.

5-1. Press and hold the [

second or longer.

] button for 1

6-1. Press the [w] or [z] button to select

“SEARCH” or “WAIT”.

3. Press the [w] or [z] button to select the

“desired setting value”.

∗ The next operation are the same as for

“PAIRING” mode.

∗ In the case of display blinking “ENT”, you

can press the [

setting value.

] button to adjust the

● SELECT

This is a setting for user to select one of the

paired mobile phones.

∗ After completing settings, press the [DISP]

button to return to the previous mode.

2-1. Select “SELECT”.

3-1. Press the [

] button, then the paired

● PAIRING

This option is used to perform Bluetooth pairing

with the mobile phone.

mobile phones appears in the display.

4-1. Press the [w] or [z] button to choose one

of the 5 devices.

Up to a maximum of 5 devices can be paired.

5-1. Press and hold the [

] button for 1

2-1. Select “PAIRING”.

second or longer to connect.

3-1. Press the [

] button.

Connected device will be able to use all the

functionalities provided.

4-1. Press the [w] or [z] button to select

“SEARCH” or “WAIT”.

● DELETE

This is a setting for user to delete one of the

paired device from the list.

5-1. Press and hold the [

second or longer.

] button for 1

“SEARCH” mode: User can search the

Bluetooth mobile phone.

2-1. Select “DELETE”.

3-1. Press the [

] button, then the paired

“WAIT” mode: Alternatively User can

search the Bluetooth BB (BLT583) via the

mobile phone.

mobile phones appears in the display.

4-1. Press the [w] or [z] button to choose one

of the 5 devices.

6-1. When you select “SEARCH” mode.

5-1. Press and hold the [

] button for 1

Press the [w] or [z] button to select the

second or longer to delete the paired

device.

Note:

• Deleted paired device will not automatically

rearrange in the paired device list.

desired Bluetooth mobile phone.

7-1. Press and hold the [

] button for 1

second or longer to pair.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Bluetooth BB Operations

● MIC GAIN

● PIN CODE

MIC gain can be set by each paired mobile

phone device. Each registered device has

unique MIC gain setting.

This PIN code is used during pairing mode. A

maximum of 10 digits can be changed through

the car stereo.

∗ The factory default PIN code is “1234”.

2-1. Select “PIN CODE”.

2-1. Select “MIC GAIN”.

3-1. Press the [w] or [z] button to change the

MIC gain setting.

3-1. Press the [

] button.

● RING VOL

This option is used to change the ringing

volume.

4-1. Press and hold the [BND] button to clear

the old PIN code.

5-1. Press the [x] or [v] button to remove

the cursor.

2-1. Select “RING VOL”.

6-1. Press the [w] or [z] button to select the

3-1. Press the [w] or [z] button to change the

desired digits.

ringing volume.

7-1. Press and hold the [

] button for 2

● AUTO ANS

seconds or longer to store in memory.

This is a setting to determine whether any

incoming call will be automatically or manually

answered.

∗ The factory default setting is “ON”.

2-1. Select “AUTO ANS”.

● ADDRESS

This will hold the unique Bluetooth BB address.

The address is 12 figures.

2-1. Select “ADDRESS”.

3-1. Press the [w] or [z] button to select “ON”

or “OFF”.

The Bluetooth BB address 6 figures

appears in the display.

ON: Any incoming call is automatically

answered in 4 seconds.

3-1. Press the [w] or [z] button to display.

● VERSION

This will display the software version of the

Bluetooth BB.

OFF: User needs to manually answer the

call.

● REFUSE

2-1. Select “VERSION”.

This function allows all incoming calls to be

refused.

The Bluetooth BB version appears in the

display.

∗ The factory default setting is “OFF”.

2-1. Select “REFUSE”.

3-1. Press the [w] or [z] button to select “ON”

or “OFF”.

ON: All incoming calls are automatically

refused.

OFF: Incoming call notification enabled.

● A-CONECT

This function allows the Bluetooth BB to be

connected automatically with previously

connected device. Connection can be

established at any source mode.

∗ The factory default setting is “ON”.

2-1. Select “A-CONECT”.

3-1. Press the [w] or [z] button to select “ON”

or “OFF”.

ON: Automatic connection is enabled.

OFF: Automatic connection is disabled.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

CD Changer Operations

Note:

Displaying CD titles

This unit can display title data for CD-text CDs

and user titles input with this unit.

∗ Title data for CD-text CDs can be displayed with

this unit only when it is connected to DCZ628.

• The following operations are the same as for CD

mode:

∗Pause

∗Track selection

∗Fast-forward/fast-backward

∗Scan play

∗Repeat play

∗Random play

See “CD/MP3/WMA/AAC Operations” (page 23-

26) for details.

1. Press the [DISP] button to change the title

display.

Notes:

• If the CD playing is not a CD-text CD or no user

title has been input, “NO TITLE” appears in the

display.

• If a CD-text CD is not input its disc title or a track

title, “NO TITLE” appears in the display.

CD changer functions

When an optional CD changer is connected

through the CeNET cable, this unit controls all

CD changer functions. This unit can control a

total of 2 changers.

Procedure to scroll a title

Set “SCROLL” to “ON” or “OFF”.

(The factory default setting is “ON”. Refer to the

subsection “Setting the method for title scroll”

in section “Operations Common to Each

Mode”.)

Press the [SRC] button and select the CD

changer mode to start play. If 2 CD changers

are connected, press the [SRC] button to select

the CD changer for play.

● When set to “ON”

∗ If “NO MAG” appears in the display, insert the

magazine into the CD changer. “D-CHECK”

appears in the display while the player loads

(checks) the magazine.

The title is automatically kept scrolling.

● When set to “OFF”

To scroll just 1 time.

When you want to see the title again, in the title

mode, press and hold the [DISP] button for 3

seconds or longer to scroll the title.

∗ If “NO DISC” appears in the display, eject the

magazine and insert discs into each slot. Then,

reinsert the magazine back into the CD changer.

Note:

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

Selecting a CD

1. Press the [w] or [z] button to select the

desired disc.

CAUTION

CD-ROM discs cannot be played from every

CD changer, it’s depended on the model.

∗ If a CD is not loaded in a slot of magazine,

pressing the [w] or [z] button can not work.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

CD Changer Operations

● Disc random play

Other various play functions

The disc random play selects and plays

individual tracks or discs automatically in no

particular order. This function continues

automatically until it is cancelled.

● Disc scan play

Disc scan play locates and plays the first 10

seconds of the first track on each disc in the

currently selected CD changer. This function

continues automatically until it is cancelled.

∗ Disc scan play is useful when you want to select a

desired CD.

1. Press and hold the [RDM] button for 1

second or longer. “ALL RDM” appears in the

display and disc random play starts.

● To cancel play

1. Press the operating button previously

selected.

1. Press and hold the [SCN] button for 1

second or longer. “ALL SCAN” appears in

the display and disc scan play starts.

● Disc repeat play

After all the tracks on the current disc have been

played, disc repeat play automatically replays

the current disc over from the first track. This

function continues automatically until it is

cancelled.

1. Press and hold the [RPT] button for 1 second

or longer. “ALL RPT” appears in the display

and disc repeat play starts.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

8. TROUBLESHOOTING

Problem

Cause

Measure

Power does not

turn on.

Fuse is blown.

Replace with a fuse of the same amperage. If the fuse

blows again, consult your store of purchase.

(No sound is

produced.)

Incorrect wiring.

Consult your store of purchase.

No sound output Power antenna lead is

1. Turn the unit off.

when operating

the unit with

amplifiers or

power antenna

attached.

shorted to ground or

2. Remove all wires attached to the power antenna

lead. Check each wire for a possible short to

ground using an ohm meter.

excessive current is required

for remote-on the amplifiers

or power antenna.

3. Turn the unit back on.

4. Reconnect each amplifier remote wire to the power

antenna lead one by one. If the amplifiers turn off

before all wires are attached, use an external relay

to provide remote-on voltage (excessive current

required).

Nothing happens The microprocessor has

Turn off the power, then press the

Reset button

when buttons are malfunctioned due to noise, [RELEASE] button and remove

pressed.

etc.

the DCP.

Press the reset button for about 2

seconds with a thin rod.

Display is not

accurate.

DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with

are dirty. cleaning alcohol.

No sound heard

The speaker protection circuit 1. Turn down sound volume. Function can also be

is operating.

restored by turning the power off and on again.

(Speaker volume is reduced automatically when

the speaker protection circuit operates).

2. If the sound is muted again, consult our service

department.

MP3/WMA/AAC files are

absent in a disc.

Write MP3/WMA/AAC files onto the disc properly.

Files are not recognized as

an MP3/WMA/AAC file.

Use MP3/WMA/AAC files encoded properly.

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo or

APPLE ISO file system.

Sound skips or is Compact disc is dirty.

Clean the compact disc with a soft cloth.

noisy.

Compact disc is heavily

Replace with a compact disc with no scratches.

scratched or warped.

Sound is cut or

skipped.

MP3/WMA/AAC files are not Use MP3/WMA/AAC files encoded properly.

encoded properly.

Noise is

generated or

noise is mixed

with sound.

Sound is bad

directly after

power is turned

on.

Water droplets may form on Let dry for about 1 hour with the power on.

the internal lens when the car

is parked in a humid place.

Wrong filename

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo or

APPLE ISO file system.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem

Cause

Measure

No sound heard

The device contains no MP3/ Record MP3/WMA/AAC files properly to the device.

WMA/AAC files.

The files are not proper MP3/ Use only properly encoded MP3/WMA/AAC files.

WMA/AAC format.

Connectors are loose.

Disconnect the device and reconnect securely.

Sound is

The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files.

interrupted or has improperly encoded.

noise.

The device isn’t

recognized.

The device is damaged.

Connectors are loose.

Disconnect the device and reconnect. If the device is

still not recognized, try replacing with a different

device.

According to the state of

operation on the device, the

communication fault is

caused.

Disconnect the device and reconnect.

Can’t insert the

device.

The device has been inserted Try reversing the connection direction of the device

improperly.

(usually the brand name surface should be facing

left).

The connector is broken.

Replace with a new device.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

Error Display

ERROR 2

Cause

A CD is caught inside the CD This is a failure of CD deck’s mechanism and consult

deck and is not ejected. your store of purchase.

Measure

ERROR 3

ERROR 6

A CD cannot be played due Replace with a non-scratched, non-warped-disc.

to scratches, etc.

A CD is loaded upside-down Eject the disc then reload it properly.

inside the CD deck and does

not play.

ERROR 2

ERROR 3

A CD inside the CD changer This is a failure of CD changer’s mechanism and

is not loaded.

consult your store of purchase.

A CD inside the CD changer Replace with a non-scratched, non-warped disc.

cannot be played due to

scratches, etc.

ERROR 6

A CD inside the CD changer Eject the disc then reload it properly.

cannot be played because it

is loaded upside-down.

ERROR 2

ERROR 3

The files are not proper MP3/ Use only properly encoded MP3/WMA/AAC files.

WMA/AAC format.

The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files.

(USB/MTP mode) improperly encoded.

ERROR 3

(iPod mode)

The iPod contains no audio Insert an iPod containing audio files.

files.

CUR ERR

Overcurrent detection.

Disconnect the devices and reconnect. If the devices

are still not recognized, try replacing with a different

devices.

HUB ERR

Do not support the HUB

devices.

Do not use the HUB devices.

If an error display other than the ones described above appears, press the reset button. If the problem

persists, turn off the power and consult your store of purchase.

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB

Download from Www.Somanuals.com. All Manuals Search And Download.

10.SPECIFICATIONS

Radio section

Tuning System: PLL synthesizer tuner

General

Output Power: 19 W

4 (DIN 45324, +B=14.4V)

Receiving Frequencies:

Power Supply Voltage:

FM : 87.5 to 108 MHz (0.05 MHz steps)

MW : 531 to 1602 kHz (9 kHz steps)

LW : 153 to 279 kHz (3 kHz steps)

14.4 V DC (10.8 to 15.6 V allowable),

negative ground

Power Consumption: Less than 15 A

Speaker Impedance: 4 Ω (4 to 8 Ω allowable)

Weight:

CD player section

System: Compact disc digital audio system

Frequency Response: 20 Hz to 20 kHz ( 1 dB)

Signal to Noise Ratio: 100 dB (1 kHz)

Dynamic Range: 80 dB (1 kHz)

Distortion: 0.03%

Main unit: 1.16 kg

Remote control unit: 40 g (including battery)

Dimensions:

Main unit:

178 (W) ✕ 50 (H) ✕ 155 (D) mm

Remote control unit:

44 (W) ✕ 113 (H) ✕ 11 (D) mm

Note:

• Specifications and design are subject to change without notice for further improvement.

11.OTHERS

WMDRM 10 for devices

• This product is protected by certain

intellectual property rights of Microsoft. Use

or distribution of such technology outside of

this product is prohibited without a license

from Microsoft.

• Content owners use Windows Media digital

rights management technology (WMDRM) to

protect their intellectual property, including

copyrights. This device uses WMDRM

software to access WMDRM-protected

content. If the WMDRM software fails to

protect the content, content owners may ask

Microsoft to revoke the software’s ability to

use WMDRM to play or copy protected

content. Revocation does not affect

unprotected content. When you download

licenses for protected content, you agree that

Microsoft may include a revocation list with

the licenses. Content owners may require you

to upgrade WMDRM to access their content.

If you decline an upgrade, you will not be able

to access content that requires the upgrade.

^DXZ388RUD^SBo^/w^Dn^Xl^Zo³a⁸d^9Rfr^Uo^Sm^B/W^DXw^Z3w⁸.⁹S^Ro^Gm^USa^Bnuals.com. All Manuals Search And Download.

ꢀ

TEL :+49-6105-977-0

FAX :+49-6105-977-399

CE DECLARATION o f CONFORMITY

ꢀ

We Clarion Europa GmbH

ꢀ

(supplier's name)

Hessenring 19-21, 64546 Mörfelden-Walldorf, GERMANY

(address)

declare under our sole responsibility that the product

CAR RADIO with CD PLAYER

MODEL: DXZ388RUSB,DXZ389RUSB,DXZ389ꢀRꢀGUꢀSꢀB ꢀ ꢀ

Product code:PE3046 (differ: illuminatioꢀn)ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

TYPE: 1043213

(name, type or model, possibly sources and numbers of items)

to which this declaration relates is in conformity with the following

standard(s) or other normative document(s)

EN 55013:2001 + A1, EN 55020:2002 + A1

(title and/or number and date of issue of the standard(s) or