C H A P T E R
8
Monitoring the Cisco Unified IP Phone Remotely
Each Cisco Unified IP Phone has a web page from which you can view a variety of information about
the phone, including:
•
•
•
•
•
Device information
Network configuration information
Network statistics
Device logs
Streaming statistics
This chapter describes the information that you can obtain from the phone’s web page. You can use this
information to remotely monitor the operation of a phone and to assist with troubleshooting.
You can also obtain much of this information directly from a phone. For more information, see
Chapter 7, “Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone.”
For more information about troubleshooting the Cisco Unified IP Phone, Chapter 9, “Troubleshooting
and Maintenance.”
This chapter includes these topics:
•
•
•
•
•
•
•
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Disabling and Enabling Web Page Access
–
Disabling and Enabling Web Page Access
For security purposes, you may choose to prevent access to the web pages for a phone. If you do so, you
will prevent access to the web pages that are described in this chapter and to the Cisco Unified CM User
Options web pages.
To disable access to the web pages for a phone, follow these steps from Cisco Unified Communications
Manager Administration.
Procedure
Step 1
Step 2
Step 3
Step 4
Choose Device > Phone.
Specify the criteria to find the phone and click Find, or click Find to display a list of all phones.
Click the device name to open the Phone Configuration window for the device.
Scroll down to the Product Specific Configuration section. From the Web Access drop-down list box,
choose Disabled.
Step 5
Click Update.
Note
Some features, such as Cisco Quality Report Tool, do not function properly without access to
the phone web pages. Disabling web access also affects any serviceability application that relies
on web access, such as CiscoWorks.
To enable web page access when it is disabled, see the preceding steps about disabling access. Follow
Device Information
The Device Information area on a phone’s web page displays device settings and related information for
To display the Device Information area, access the web page for the phone as described in the “Accessing
Table 8-1
Device Information Area Items
Item
Description
MAC Address
Host Name
Phone DN
App Load ID
Media Access Control (MAC) address of the phone
Unique, fixed name that is automatically assigned to the phone based on its MAC address
Directory number assigned to the phone
Identifier of the firmware running on the phone
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Setup
Table 8-1
Device Information Area Items (continued)
Item
Description
Boot Load ID
Hardware Revision
Serial Number
Model Number
Message Waiting
UDI
Identifier of the factory-installed load running on the phone
Revision value of the phone hardware
Unique serial number of the phone
Model number of the phone
Indicates if there is a voice message waiting on the primary line for this phone.
Displays the following Cisco Unique Device Identifier (UDI) information about the phone:
•
Device Type—Indicates hardware type. For example, phone displays for all phone
models
•
Device Description—Displays the name of the phone associated with the indicated
model type
•
•
•
Product Identifier—Specifies the phone model
Version Identifier—Represents the hardware version of the phone
Serial Number—Displays the unique serial number of the phone.
Time
Time obtained from the Date/Time Group in Cisco Unified Communications Manager to
which the phone belongs
Time Zone
Date
Time zone obtained from the Date/Time Group in Cisco Unified Communications Manager
to which the phone belongs
Date obtained from the Date/Time Group in Cisco Unified Communications Manager to
which the phone belongs
Network Setup
The Network Setup on a phone’s web page displays network setup information and information about
You can view and set many of these items from the Network Setup Menu and the Phone Information
Menu on the Cisco Unified IP Phone. For more information, see Chapter 4, “Configuring Settings on the
Cisco Unified IP Phone.”
To display the Network Setup area, access the web page for the phone as described in the “Accessing the
Table 8-2
Network Configuration Area Items
Item
Description
DHCP Server
IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the
phone obtains its IP address.
MAC Address
Host Name
Media Access Control (MAC) address of the phone.
Host name that the DHCP server assigned to the phone.
Name of the Domain Name System (DNS) domain in which the phone resides.
Internet Protocol (IP) address of the phone.
Domain Name
IP Address
Subnet Mask
Subnet mask used by the phone.
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
8-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Setup
Table 8-2
Network Configuration Area Items (continued)
Item
Description
TFTP Server 1
TFTP Server 2
Default Router 1–5
Primary Trivial File Transfer Protocol (TFTP) server used by the phone.
Backup Trivial File Transfer Protocol (TFTP) server used by the phone.
Default router used by the phone (Default Router 1) and optional backup routers (Default
Router 2–5).
DNS Server 1–5
Primary Domain Name System (DNS) server (DNS Server 1) and optional backup DNS
servers (DNS Server 2–5) used by the phone.
Operational VLAN ID
Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco Catalyst switch in
which the phone is a member.
Admin. VLAN ID
Unified CM 1–5 -
Auxiliary VLAN in which the phone is a member.
Host names or IP addresses, in prioritized order, of the Cisco Unified Communications
Manager servers with which the phone can register. An item can also show the IP address
of an SRST router that is capable of providing limited Cisco Unified Communications
Manager functionality, if such a router is available.
For an available server, an item will show the Cisco Unified Communications Manager
server IP address and one of the following states:
•
•
•
Active—Cisco Unified Communications Manager server from which the phone is
currently receiving call-processing services.
Standby—Cisco Unified Communications Manager server to which the phone
switches if the current server becomes unavailable.
Blank—No current connection to this Cisco Unified Communications Manager server.
An item may also include the Survivable Remote Site Telephony (SRST) designation,
which identifies an SRST router capable of providing Cisco Unified Communications
Manager functionality with a limited feature set. This router assumes control of call
processing if all other Cisco Unified Communications Manager servers become
unreachable. The SRST Cisco Unified Communications Manager always appears last in
the list of servers, even if it is active. You configure the SRST router address in the Device
Pool section in Cisco Unified Communications Manager Configuration window.
Information URL
Directories URL
Messages URL
URL of the help text that appears on the phone.
URL of the server from which the phone obtains directory information.
URL of the server from which the phone obtains message services.
URL of the server from which the phone obtains Cisco Unified IP Phone services.
Indicates whether DHCP is being used by the phone.
Services URL
DHCP Enabled
DHCP Address Released
Indicates the setting of the DHCP Address Released option on the phone’s Network
Configuration menu.
Alternate TFTP
Indicates whether the phone is using an alternative TFTP server.
Forwarding Delay
Indicates whether the internal switch begins forwarding packets between the PC port and
switched port on your phone when your phone becomes active. When forwarding delay is
set to disabled, the internal switch begins forwarding packets immediately. When
forwarding delay is set to enabled, the internal switch waits eight seconds before
forwarding packets between the PC port and the SW port. You should set forwarding delay
to enabled when you connect both ports to switches for redundant uplinks or when you
daisy-chain phones together.
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Setup
Table 8-2
Network Configuration Area Items (continued)
Item
Description
Idle URL
URL that the phone displays when the phone has not been used for the time specified by
Idle URL Time, and no menu is open.
Idle URL Time
Number of seconds that the phone has not been used and no menu is open before the XML
service specified by Idle URL is activated.
Proxy Server URL
URL of proxy server, which makes HTTP requests to non-local host addresses on behalf of
the phone HTTP client and provides responses from the non-local host to the phone HTTP
client.
Authentication URL
URL that the phone uses to validate requests made to the phone web server.
Speed and duplex of the switch port, where:
SW Port Configuration
•
•
•
•
•
•
A—Auto Negotiate
10H—10-BaseT/half duplex
10F—10-BaseT/full duplex
100H—100-BaseT/half duplex
100F—100-BaseT/full duplex
No Link—No connection to the switch port
PC Port Configuration
Speed and duplex of the switch port, where:
•
•
•
•
•
•
A—Auto Negotiate
10H—10-BaseT/half duplex
10F—10-BaseT/full duplex
100H—100-BaseT/half duplex
100F—100-BaseT/full duplex
No Link—No connection to the PC port
TFTP Server 2
User Locale
Backup TFTP server that the phone uses if the primary TFTP server is unavailable.
User locale associated with the phone user. Identifies a set of detailed information to
support users, including language, font, date and time formatting, and alphanumeric
keyboard text information.
Network Locale
Network locale associated with the phone user. Identifies a set of detailed information to
support the phone in a specific location, including definitions of the tones and cadences
used by the phone.
Headset Enabled
Indicates whether the Headset button is enabled on the phone.
Version of the user locale loaded on the phone.
User Locale Version
Network Locale Version
PC Port Disabled
Version of the network locale loaded on the phone.
Indicates whether the PC port on the phone is enabled or disabled.
Indicates whether the speakerphone is enabled on the phone.
Indicates whether the phone learns MAC addresses from Gratuitous ARP responses.
Speaker Enabled
GARP Enabled
Video Capability Enabled
Indicates whether the phone can participate in video calls when connected to an
appropriately equipped PC.
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
8-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Statistics
Table 8-2
Network Configuration Area Items (continued)
Description
Item
Voice VLAN Enabled
Indicates whether the phone allows a device attached to the PC port to access the Voice
VLAN.
Auto Line Select
Indicates whether the phone shifts the call focus to incoming calls on all lines.
DSCP IP classification for call control signaling.
DSCP for Call Control
DSCP for Configuration
DSCP for Services
Security Mode
DSCP IP classification for any phone configuration transfer.
DSCP IP classification for phone-based services.
Displays the security mode that is set for the phone.
Web Access Enabled
Span to PC Port
Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
Indicates whether the phone will forward packets transmitted and received on the network
port to the access port.
PC VLAN
VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC.
Indicates whether CDP is supported on the PC port (default is enabled).
CDP: PC Port
Enable CDP on the PC port when Cisco VT Advantage/Unified Video Advantage (CVTA)
is connected to the PC port. CVTA does not work without CDP interaction with the phone.
When CDP is disabled in Cisco Unified Communications Manager, a warning is displayed,
indicating that disabling CDP on the PC port prevents CVTA from working.
The current PC and switch port CDP values are shown on the Settings menu.
Indicates whether CDP is supported on the switch port (default is enabled).
CDP: SW Port
Enable CDP on the switch port for VLAN assignment for the phone, power negotiation,
QoS management, and 802.1x security.
Enable CDP on the switch port when the phone is connected to a Cisco switch.
When CDP is disabled in Cisco Unified Communications Manager, a warning is presented,
indicating that CDP should be disabled on the switch port only if the phone is connected to
a non-Cisco switch.
The current PC and switch port CDP values are shown on the Settings menu.
Network Statistics
The following network statistics hyperlinks on a phone’s web page provide information about network
traffic on the phone. To display a network statistics area, access the web page for the phone as described
•
this area.
•
Network—Displays information about network traffic to and from the network port (10/100 SW) on
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
8-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Device Logs
Table 8-3
Ethernet Information Items
Item
Description
Tx Frames
Tx broadcast
Tx unicast
Rx Frames
Rx broadcast
Rx unicast
Total number of packets transmitted by the phone
Total number of broadcast packets transmitted by the phone
Total number of unicast packets transmitted by the phone
Total number of packets received by the phone
Total number of broadcast packets received by the phone
Total number of unicast packets received by the phone
Table 8-4
Access Area and Network Items
Item
Description
Tx Frames
Total number of packets transmitted by the phone
Total number of broadcast packets transmitted by the phone
Total number of unicast packets transmitted by the phone
Total number of packets received by the phone
Tx broadcast
Tx Unicast
Rx Frames
Rx broadcast
Rx unicast
Total number of broadcast packets received by the phone
Total number of unicast packets received by the phone
Identifier of a device connected to this port discovered by CDP protocol.
IP address of the neighbor device discovered by CDP protocol.
Neighbor device port to which the phone is connected discovered by CDP protocol.
Speed and duplex information.
CDP Neighbor Device ID
CDP Neighbor IP Address
CDP Neighbor Port
Port Information
IPv4
Information on the DHCP status.
Device Logs
The following device logs hyperlinks on a phone’s web page provide information you can use to help
monitor and troubleshoot the phone. To access a device log area, access the web page for the phone as
•
•
•
Console Logs—Includes hyperlinks to individual log files. The console log files include debug and
error messages received on the phone.
Core Dumps—Includes hyperlinks to individual dump files. The core dump files include data from
a phone crash.
Status Messages—Displays up to the 10 most recent status messages that the phone has generated
since it was last powered up. You can also see this information from the Status Messages screen on
the phone. Table 7-2 describes the status messages that can appear.
•
Debug Display—Displays debug messages that might be useful to Cisco TAC if you require
assistance with troubleshooting.
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
8-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Streaming Statistics
Streaming Statistics
A Cisco Unified IP Phone can stream information to and from up to three devices simultaneously. A
phone streams information when it is on a a call or running a service that sends or receives audio or data.
The streaming statistics areas on a phone’s web page provide information about the streams. Cisco
Unified IP Phones 6900 Series use only Stream 1.
To display a Streaming Statistics area, access the web page for the phone as described in the “Accessing
Table 8-5 describes the items in the Streaming Statistics areas.
Table 8-5
Streaming Statistics Area Items
Item
Description
Remote Address
Local Address
Start Time
IP address and UDP port of the destination of the stream.
IP address and UPD port of the phone.
Internal time stamp indicating when Cisco Unified Communications Manager requested
that the phone start transmitting packets.
Stream Status
Host Name
Indication of whether streaming is active or not.
Unique, fixed name that is automatically assigned to the phone based on its MAC address.
Sender Packets
Total number of RTP data packets transmitted by the phone since starting this connection.
The value is 0 if the connection is set to receive only mode.
Sender Octets
Total number of payload octets transmitted in RTP data packets by the phone since starting
this connection. The value is 0 if the connection is set to receive only mode.
Sender Codec
Type of audio encoding used for the transmitted stream.
Sender Reports Sent1
Sender Report Time Sent1
Rcvr Lost Packets
Number of times the RTCP Sender Report have been sent.
Internal time stamp indication when the last RTCP Sender Report was sent.
Total number of RTP data packets that have been lost since starting receiving data on this
connection. Defined as the number of expected packets less the number of packets actually
received, where the number of received packets includes any that are late or duplicate. The
value displays as 0 if the connection was set to send-only mode.
Avg Jitter
Estimate of mean deviation of the RTP data packet inter-arrival time, measured in
milliseconds. The value displays as 0 if the connection was set to send-only mode.
Rcvr Codec
Type of audio encoding used for the received stream.
Rcvr Reports Sent1
Rcvr Report Time Sent1
Rcvr Packets
Number of times the RTCP Receiver Reports have been sent.
Internal time stamp indication when a RTCP Receiver Report was sent.
Total number of RTP data packets received by the phone since starting receiving data on
this connection. Includes packets received from different sources if this is a multicast call.
The value displays as 0 if the connection was set to send-only mode.
Rcvr Octets
Total number of payload octets received in RTP data packets by the device since starting
reception on the connection. Includes packets received from different sources if this is a
multicast call. The value displays as 0 if the connection was set to send-only mode.
Cumulative Conceal Ratio
Total number of concealment frames divided by total number of speech frames received
from start of the voice stream.
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
8-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Streaming Statistics
Table 8-5
Streaming Statistics Area Items (continued)
Item
Description
Interval Conceal Ratio
Ratio of concealment frames to speech frames in preceding 3-second interval of active
speech. If using voice activity detection (VAD), a longer interval might be required to
accumulate 3 seconds of active speech.
Max Conceal Ratio
Conceal Secs
Highest interval concealment ratio from start of the voice stream.
Number of seconds that have concealment events (lost frames) from the start of the voice
stream (includes severely concealed seconds).
Severely Conceal Secs
Latency1
Number of seconds that have more than 5 percent concealment events (lost frames) from
the start of the voice stream.
Estimate of the network latency, expressed in milliseconds. Represents a running average
of the round-trip delay, measured when RTCP receiver report blocks are received.
Max Jitter
Maximum value of instantaneous jitter, in milliseconds.
RTP packet size, in milliseconds, for the transmitted stream.
Number of times RTCP Sender Reports have been received.
Last time at which an RTCP Sender Report was received.
Sender Size
Sender Reports Received1
Sender Report Time
Received1
Rcvr Size
RTP packet size, in milliseconds, for the received stream.
RTP packets received from network but discarded from jitter buffers.
Number of times RTCP Receiver Reports have been received.
Rcvr Discarded
Rcvr Reports Received1
Voice Quality Metrics
Cumulative Conceal Ratio
Total number of concealment frames divided by total number of speech frames received
from start of the voice stream.
Interval Conceal Ratio
Ratio of concealment frames to speech frames in preceding 3-second interval of active
speech. If using voice activity detection (VAD), a longer interval might be required to
accumulate 3 seconds of active speech.
Max Conceal Ratio
Conceal Secs
Highest interval concealment ratio from start of the voice stream.
Number of seconds that have concealment events (lost frames) from the start of the voice
stream (includes severely concealed seconds).
Severely Conceal Secs
Number of seconds that have more than 5 percent concealment events (lost frames) from
the start of the voice stream.
1. When the RTP Control Protocol is disabled, no data generates for this field and thus displays as 0.
Related Topics
•
“Configuring Settings on the Cisco Unified IP Phone” chapter
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
8-10
Download from Www.Somanuals.com. All Manuals Search And Download.
|