WIRELESS IMAGER
Reference Manual
International Edition, Rev. B5
Download from Www.Somanuals.com. All Manuals Search And Download.
Revision History
Rev. No.
Released Date
Description
Rev. A
Oct 16, 2009
First Release
ꢀ Page 6
Revise “Clone Function” operation method.
Rev. A1
Rev. A2
Oct 22, 2009
Nov 27, 2009
ꢀ Page 68
Add “Save Configuration” and “Master Default” to System Commands.
ꢀ Page 53
ꢀ Page 69
“Bluetooth Device Name” – Modify user define characters from 1 – 14
characters to 1 – 16 characters.
Add “Indications”.
ꢀ Page 25
ꢀ Page 43
ꢀ Page 45
ꢀ Page 48
Modify UPC-E/EAN-8 expansion and UPC-A standardization.
Rename “Time Out Control” to “Serial Response Time-out”.
Rename “Presentation Scanning Mode” to “Presentation Control”.
Rename “Auto Power Off Duration” to “Light Source On Time”.
Add “Extremely short” option to Good Read Duration.
Rev. A3
Mar 05, 2010
ꢀ Page 49
Rename “Presentation Scanning Auto-sense” to “Presentation Auto-sense”.
Add “Presentation Sensitivity”
ꢀ Page 38
ꢀ Page 43
Hands Free Time-out – Add “Disable”.
Rev. A4
Rev. A5
Apr 27, 2010
Jun 28, 2010
Baud Rate – Add 57.6K BPS and 115.2K BPS.
ꢀ Page 27
ꢀ Page 49
ꢀ Page 47
ꢀ Page 48
Add “UPC/EAN Security Level”.
Add “Time Delay to Low Power Trigger”
Add “Good Read Indicator”.
Add “Scan Voting”.
ꢀ Page 25,26
Rename ”Scan Voting” to “Supplement Scan Voting” and add “Supplement
Scan Voting” in Symbology Reading Control
ꢀ Page 27
ꢀ Page 38
Add “EAN Supplement Control”
Rev. A6
Sep 20, 2010
Keyboard Layout – Add “Czech (QWERTY)”, remove “Universal”, and rename
Spain (QWERTY) to Spain (Spanish QWERTY), Latin America (QWERTY) to
Spain (Latin America, QWERTY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Revision History
Rev. No.
Rev. A6
Rev. A7
Rev. A8
Rev. A9
Released Date
Sep 20, 2010
Nov 10, 2010
Jan 2, 2011
Description
ꢀ Page 48
ꢀ Page 54
Remove ”Scan Voting” and add “Scan Rate Control ”
Add “<Scanned Data><Field Delimiter><Quantity>” parameter selection in Batch Data
Quantity Output Format.
ꢀ Page 44
ꢀ Page 47
Baud Rate – Cancel Baud Rate 300/600 BPS.
Buzzer Tone Adjust – Modify No power-on beep behavior. The setting of
No power-on beep will impact both Bluetooth Scanner and Smart Cradle.
Add “Beeping Control” setting.
Mar 04, 2011 ꢀ Page 44
Baud Rate – Revise 57.6K BPS and 115.2K BPS option code from 6.7. to 8.9.
ꢀ Page 23
ꢀ Page 45
Add ”Code 39 Security Level”.
Add “NAK Retry Count”.
Rev. B1
Mar 22, 2011
Add “ACK/NAK Transmission Indication”.
Add “Numeric Bar Codes ”.
ꢀ Page 69
ꢀ Page 73
Add “Connecting Apple iOS Devices Quick Sets”.
ꢀ Page 19, 29, 34, 67 UCC/EAN-128 was renamed GS1-128.
ꢀPage 45
ꢀPage 45
Rename “ACK/NAK Transmission Indication” to “ACK Indication”.
Rename the 2 parameters of the “ACK Indication”.
(Disable
Disable ACK Time-out Indication, Enable
Enable ACK Time-out
Indication)
ꢀPage 45
Add 2 new parameters to “ACK Indication”.(Disable ACK Indication, Enable
ACK Indication)
Rev. B2
Jul 22, 2011
ꢀPage 47
ꢀPage 47
ꢀ Page 54
Add 6 parameters to “Serial response time -out”. (800 mseconds, 3 seconds, 4
seconds, 8 seconds, 10 seconds, 15 seconds)
Cancel the parameter "User defined value (seconds)” of “Serial response time
-out”.
Add “Laser Aiming Control” function.
Download from Www.Somanuals.com. All Manuals Search And Download.
Revision History
Rev. No.
Released Date
Description
ꢀ Page 3, 5, 10 “Paging/ Reset button” is changed from 3 seconds to 5 seconds.
Rev. B3
Nov 04, 2011
ꢀ Page 24
Add a new function “Codabar Check Digit Settings”
ꢀ
ꢀ
Page 49
Page 49
Cancel 1 parameter of “Code 39/Code 128 Emulation”.(Disable standard code
39 emulation - -0)
Change of default setting to Enable standard code 39 skip emulation in “Code
39/Code 128 Emulation”.
Rev. B4
Rev. B5
Jan 03, 2012
Mar 05, 2012
(Disable standard code 39 emulation (0)
emulation (1))
Enable standard code 39 skip
ꢀPage 56
Add 3 new functions:”1D Barcode Forward-reading Indication”, “1D Barcode
Backward-reading Indication”, “1D Barcode Direction Indication Transmission”
Download from Www.Somanuals.com. All Manuals Search And Download.
© Copyright Cino Group
© Copyright PC Worth Int’l Co., Ltd
Cino makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of
merchantability and fitness for any particular purpose. Cino shall not be liable for errors contained herein or for incidental
consequential damages in connection with the furnishing, performance, or use of this publication. This publication contains
proprietary information that is protected by copyright. All rights are reserved. No part of this publication may be photocopied,
reproduced or translated into any language, in any forms, in an electronic retrieval system or otherwise, without prior written
permission of Cino. All product information and specifications shown in this document may be changed without prior notice.
Warranty
Cino warrants its products against defects in workmanship and materials from the date of shipment, provided that the
product is operated under normal and proper conditions. The warranty provisions and durations are furnished by different
warranty programs. The above warranty does not apply to any product which has been (i) misused; (ii) damaged by accident
or negligence; (iii) modified or altered by the purchaser or other party; (iv) repaired or tampered by unauthorized
representatives; (v) operated or stored beyond the specified operational and environmental parameters; (vi) applied
software, accessories or parts are not supplied by Cino; (vii) damaged by circumstances out of Cino’s control, such as, but
not limited to, lightning or fluctuation in electrical power. Any defective product must follow the warranty program and RMA
procedures to return Cino for inspection.
Regulatory
FCC part 15B, FCC part 15C
EN61000-6-2, EN61000-6-3, EN60950-1, EN301 489-1, EN301 489-17, EN300 328
CNS13438, CNS14336
AS/NZS CISPR 22:2009 Class B
LP0002
Download from Www.Somanuals.com. All Manuals Search And Download.
MIC T401
LED Eye Safety IEC62471 Exempt group
Laser Eye Safety IEC60825-1 Class 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Getting Started
Getting Familiar with Your FuzzyScan
Preparation before Using
1
2
Decide Your Radio Link Mode
Using FuzzyScan in PAIR Mode
Using FuzzyScan in PICO Mode
Using FuzzyScan in HID Mode
Using FuzzyScan in SPP Mode
3
4
5
7
8
Out-of-range Scanning/Presentation Scanning/Paging Function
Batch Scanning (Inventory Mode)
10
11
Configure Your FuzzyScan
Bar Code Programming Manual
Programming Procedures
Host Interface Selection
Symbology Reading Control
Keyboard Interface Control
Serial Interface Control
13
14
18
19
38
42
45
46
56
Wand/Laser Emulation Control
Operation Control
Condensed DataWizard
Appendix
Symbology ID Table
63
64
65
66
67
68
69
70
Keyboard Function Code Table
ASCII Input Shortcut
Link Mode Quick Set/Operation Mode Quick Set
Host Interface Quick Set
Option Codes
System Commands
Indications
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Familiar with Your FuzzyScan
Thank you for choosing Cino FuzzyScan Bluetooth Cordless Image Scanner. Powered by the combination of cutting-edge
FuzzyScan 2.0 Imaging Technology and Bluetooth 2.1 EDR wireless technology, it not only provides outstanding reading
performance, but also delivers the convenience and freedom of mobility. This document provides a quick reference for
F700BT Series Scanner
HB2110 Smart Cradle (Base)
Center Indicator
Side Indicators
Paging/Reset Button
Host Interface Port
DC Power Jack
Link Indicator
Status Indicator
Beeper
Scan Window
Trigger
F600BT Series Scanner
HB2100 Charging Cradle (Base)
Reset Button
Battery Cavity
End Cap
Power Indicator
Reserved
Reserved
DC Power Jack
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Preparation before Using
Install the Battery
Ensure the battery contacts of the battery pack are facing the charging contacts inside
the battery cavity.
Slide the battery pack into the battery cavity until hearing a click sound before locking it
with the end cap. The scanner will give 4 beeps when the battery pack is installed
properly if the battery pack still has power.
Secure the end cap with the screw provided, and make sure the end cap is secured
properly before using the scanner.
Charging the Battery
There are 4 different power plugs in your power supply kit. Choose the appropriate local
plug and slot it onto the power adapter cavity until it is locked.
Plug the AC power plug into the appropriate AC wall socket.
Plug the DC power cord of the power supply unit into the DC power jack of the cradle.
The smart cradle will issue the power on beeps and the center indicator will give one
blue blink. If you use the charging cradle, please check the power indicator of the
charging cradle turns steady blue.
Place the scanner on the cradle. The status indicator of scanner will turn steady red if
the battery is not fully charged. When the battery is fully charged, the status indicator of
scanner will flash green at regular interval.
Please charge the new battery pack for 8 hours prior to the first use.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Decide Your Radio Link Mode
The FuzzyScan Bluetooth image scanner provides several radio link modes to communicate with most host devices. When
the Bluetooth-enabled host device is not available, it can work with the smart cradle in PAIR mode (one to one connection) or
PICO mode (multiple connections) to provide a plug-and-play cordless migration of your existing non-Bluetooth-enabled IT
assets. Moreover, you are also able to use the scanner to work with Bluetooth-enabled host devices via SPP master/slave
modes and HID mode.
After losing the radio link, the scanner is capable of resuming the radio connection automatically while it returns to the
communication coverage. But please note that this feature is not available in SPP slave mode. If you would like to change
the radio link mode, you have to scan the “Uninstall” command to revert the scanner to uninstall state.
PAIR Mode
If the Bluetooth device is not available in your existing system, this is the simplest plug-and-play solution. In this mode, one
scanner can only work with one smart cradle. The smart cradle not only provides the Bluetooth radio link with the scanner,
but also offers the legacy cabled interfaces to the host device, including USB HID, USB COM, PS/2(DOS/V) Keyboard
Wedge and RS232 Serial.
PICO Mode
For the requirement of multiple connections, up to 7 scanners can be connected to one smart cradle concurrently. If you
would like to un-pair all paired scanners and smart cradle, you can simply press and hold the paging/reset button of the
smart cradle for over 5 seconds. If you just want to un-pair part of the paired scanners, please take those paired scanners to
scan the “Uninstall” command one by one.
HID Mode
Through the most helpful HID service, the scanner can work like a Bluetooth keyboard. In this mode, the scanner is
discoverable by the radio connection request issued by a remote host device. For security purpose, you will be requested to
input the PIN Code to establish the Bluetooth connection in most time.
SPP Master/Slave Mode
Through the standard SPP service, the scanner can work like a serial input device. In SPP master mode, the scanner
initiates the radio connection request to a remote slave device. In SPP slave mode, the scanner is discoverable by the radio
connection request issued by a remote master device.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Using FuzzyScan in PAIR Mode
Ensure the battery is fully charged. You may refer to the section of Preparations before Using for details.
Please choose your desired interface cable, then plug it into the host interface port of the smart cradle and connect it to
the host device.
USB
PS/2
RS232
Turn on the power of your host device.
Please note that the scanner has been pre-paired already, if the scanner is shipped together with the smart cradle. You
will see the link indicator of scanner gives 1 blue blink per 2.5 seconds and the middle indicator of smart cradle turns
steady blue. If the scanner and smart cradle just give alternating red and green blinks (in “Uninstall” state), please
follow steps 5-6 to establish the connection between the scanner and the smart cradle.
Scan “PAIR mode” command. The status indicator of scanner will turn steady red.
Uninstall
PAIR Mode
Place the scanner on the smart cradle, then you will hear one short beep to indicate the pairing process is activated. The
scanner will give continuous short clicks and the link indicator of scanner will flash blue quickly during the pairing process.
When you hear 4 beeps in ascending tone, the pairing process is completed. You will see the link indicator of scanner
giving 1 blue blink per 2.5 seconds and the center indicator of the smart cradle turning steady blue.
If the scanner pairing process failed or it’s not placed on the smart cradle within 20 seconds, you will hear 2 “Di-do Di-do”
beeps to indicate pair failure, the scanner will return to uninstall state automatically.
Scan the corresponding host interface quick set command to complete the installation.
The default host interface of smart cradle is preset to USB HID. If you want to set the host interface to USB COM, you have to
install the USB virtual COM driver into your host device before using the scanner. Please visit the CINO website to download
the software driver.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Using FuzzyScan in PICO Mode
Ensure the battery is fully charged and choose your desired interface cable, then plug it into the host interface port of the
smart cradle and connect it to the host device.
USB
PS/2
RS232
Turn on the power of your host device.
Ensure the side indicators of the smart cradle give alternative red and green blinks (in “Uninstall” state). If the smart
cradle is paired with other scanners, you can press and hold the paging/reset button for over 5 seconds to un-pair all
paired scanners. Then the smart cradle will return to uninstall state automatically.
Prepare the scanners you desire to pair with smart cradle. Ensure the status indicator of each scanner give alternative
red and green blinks (in “Uninstall” state). If the scanner is not in uninstall state, please scan the “Uninstall” command to
un-pair the scanner. Then scan the “PICO mode” command, and the status indicator of scanner will turn steady red.
Uninstall
PICO Mode
Place the scanner on the smart cradle, then you will hear one short beep to indicate the pairing process is activated. The
scanner will give continuous short clicks and the link indicator of scanner will flash blue quickly during the pairing process.
When you hear 4 beeps in ascending tone, the pairing process is completed. You will see the link indicator of scanner
giving 1 blue blink per 2.5 seconds, the center indicator of the smart cradle turning steady blue and its side indicators
turning steady green.
If the scanner pairing process failed or it’s not placed on the smart cradle within 20 seconds, you will hear 2 “Di-do Di-do”
beeps to indicate pair failure, the scanner will return to uninstall state automatically.
Scan the corresponding host interface quick set command to complete the installation.
Please follow the same procedures to pair the other scanners with the smart cradle.
For user’s convenience, the smart cradle will automatically assign the ID numbers to each scanner. After completed all
pairing processes, you can scan the “System Information” command to check the assigned ID number of each scanner.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Clone Function
For the user’s convenience, the clone function will help you to clone the host interface related parameters (please refer to
following table for details) from one of the paired scanners to the rest of paired scanners under PICO mode. You can use
one of the paired scanners to set the host interface related parameters first and then scan “Save Configuration” command.
After that, please take the other paired scanners to scan “Clone” command one by one to clone the host interface related
parameters.
Please ensure to keep those paired scanners in connected status when you use the “Clone” function. Because the host
interface related parameters can’t be cloned to the paired scanner in disconnected status.
Save Configuration
Clone
The below host interface related parameters will be impacted by clone function:
Data Transmission Parameter
Field Delimiter
Serial Interface Control
Handshaking Protocol
Intermessage Delay
Data Transmission Format
Host Interface Control
Interfunction Delay
Intercharacter Delay
Host interface Selection
Keyboard Interface Control
Keyboard Layout
Baud Rate
Data Frame
Intermessage Delay
Time Out Control
Interfunction Delay
Wand Emulation Control
Output Polarity
Intercharacter Delay
Caps Lock Control
Initial Signal State
Margin Time
Caps Lock Release Control
Function Key Emulation
Key Pad Emulation
Upper/Lower Case
Module Time
Narrow/Wide Ratio
Code39 Emulation
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Using FuzzyScan in HID Mode
Ensure the battery is fully charged. Power on the scanner within radio range and ensure the status indicator of scanner
gives alternating red and green blinks (in “Uninstall” state). If the scanner is not in uninstall state, please scan the
“Uninstall” command first. Then scan the “HID Mode” command, and the link indicator of scanner will give 3 blue blinks
per 2 seconds.
Uninstall
HID Mode
Execute the Bluetooth Discovery procedure to find all available Bluetooth devices in your remote host. You will see ‘’CINO
FxxxBT-xxxx’’ is shown in the list if the scanner is successfully discovered already.
Double click the “CINO FxxxBT-xxxx” in the discovered Bluetooth device list. If the PIN Code or Passkey is requested for
security connection, please enter “00000000” (default setting). You will see “Keyboard on CINO FxxxBT-xxxx”, and
double click this HID service to establish the connection between the scanner and the remote host device.
The scanner will give 4 beeps in ascending tone to indicate the radio is connected. At the same time, the link indicator of
scanner will give 1 blue blink per 2.5 seconds to indicate the scanner is in radio-connected state.
Please note that if the scanner is not connected to the host device within 1 minute after scanning the “HID Mode”
command, the scanner will go to sleep automatically. You just need to press the trigger to wake up the scanner to
continue the installation.
1. The installation procedures vary on different remote host devices, operation systems and the Bluetooth software driver.
Please consult your professional IT consultant to obtain necessary support if any problem has been encountered during
the installation processes.
2. While using HID mode, beware of potential error in the data transmitted at the same time when radio link quality is poor.
You are suggested to use the scanner under the communication coverage all the times.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Using FuzzyScan in SPP Mode
Establish SPP Master Connection
Ensure the battery is fully charged. Please go to the folder of “Hardware” located in Bluetooth Advanced Setting of the
remote host device to check its device MAC address. Then prepare a 12-character Code 128 barcode of the remote host
device MAC address, or follow the step 4 to input MAC address by scanning 12 option codes.
Ensure a virtual COM port is available in your remote host for connecting the scanner. If not, please go to the folder of
“Local Services” located in Bluetooth Advanced Setting. Click the “Add Serial Services” to add one more Bluetooth
COM port.
Power on the scanner within radio range and ensure the status indicator of scanner gives alternating red and green
blinks (in “Uninstall” state). If the scanner is not in uninstall state, please scan the “Uninstall” command first. Then scan
the “SPP Master Mode” command, and the status indicator of scanner will turn steady red.
Uninstall
SPP Master Mode
Scan a 12-character MAC address barcode, or scan 12 option codes and “FIN” command to confirm your inputs. The
scanner will give continuous short clicks and the link indicator of the scanner will flash blue quickly during the radio
connecting process. If the PIN Code or Passkey is requested for security connection, please enter “00000000” (default
setting).
The scanner will give 4 beeps in ascending tone to indicate the radio is connected. At the same time, the link indicator of
scanner will give 1 blue blink per 2.5 seconds to indicate the scanner is in radio-connected state.
Please note that if the scanner failed to connect to the host device within 30 seconds, the link indicator will give 3 blue
blinks per 2 seconds. But the scanner is still continuing to discover the host device for another 30 seconds before go to
sleep. In the interim, you still can scan “Uninstall” command to revert the scanner to uninstall state. If the scanner goes to
sleep already, you just need to press the trigger to wake up the scanner to continue the installation.
The installation procedures vary on different remote host devices, operating systems and the Bluetooth software driver.
Please consult your professional IT consultant to obtain necessary support if any problem has been encountered during the
installation processes.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Establish SPP Slave Connection
Ensure the battery is fully charged and a virtual COM port is available in your remote host for connecting the scanner. If
not, please go to the folder of “Client Applications” located in Bluetooth Advanced Setting. Click the “Add COM Port” to
add one more Bluetooth COM port.
Power on the scanner within radio range and ensure the status indicator of scanner gives alternating red and green
blinks (in “Uninstall” state). If the scanner is not in uninstall state, please scan the “Uninstall” command first. Then scan
the “SPP Slave Mode” command, and the link indicator of scanner will give 3 blue blinks per 2 seconds.
Uninstall
SPP Slave Mode
Execute the Bluetooth Discovery procedure to find all available Bluetooth device list in your remote host. You will see
‘’CINO FxxxBT-xxxx’’ is shown in the list if the scanner is successfully discovered already.
Double click the “CINO FxxxBT-xxxx” on the discovered Bluetooth devices. If the PIN Code or Passkey is requested for
security connection, please enter “00000000” (default setting). You will see “Serial Port on CINO FxxxBT-xxxx”, and
double click this SPP service to establish the connection between the scanner and the remote host device.
The scanner will give 4 beeps in ascending tone to indicate the radio is connected. At the same time, the link indicator of
scanner will give 1 blue blink per 2.5 seconds to indicate the scanner is in radio-connected state.
Please note that if the scanner is not connected to the host device within 1 minute, the scanner will go to sleep. You can
press the trigger to wake up the scanner to continue the installation.
The installation procedures vary on different remote host devices, operating systems and the Bluetooth software drivers.
Please consult your professional IT consultant to obtain necessary support if any problem has been encountered during the
installation processes.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Out-of-range Scanning
When the radio is connected between the scanner and the remote host device, the scanner will transmit each scanned data
right after scanning the barcode. However, the scanner is preset for unable to scan any barcode data when it loses the radio
connection with the remote host device.
If you enable the out-of-range scanning function, the scanner is able to continue scanning barcode data while it is out of
working range. All scanned data will be temporarily stored into the memory buffer until radio link resumed.
Enable Out-of-range Scannning
Disable Out-of-range Scanning
In case of the scanner is out of working range, you will hear 4 beeps in descending tone to indicate the radio connection lost.
The link indicator of scanner will give 3 blue blinks per 2 seconds. Once the scanner is back to working range, you will hear 4
beeps in ascending tone to indicate the radio connection rebuilt and the scanner will give 1 blue blink per 2.5 seconds. At the
same time, all stored scanned data will be transmitted automatically right after the radio link is resumed.
Presentation Scanning
The Presentation Scanning is designed for hand-free applications for user’s convenience. If the “Presentation Scanning
Auto-sense” function is enabled, the scanner is capable of automatically switching to presentation mode when you place it
onto the SmartStand or cradle.
Enable Presentation Scanning Auto-sense
Disable Presentation Scanning Auto-sense
Paging Function
The paging function is helpful for you to locate the paired smart cradle or scanner. If you would like to page the paired smart
cradle, you can scan “Paging” command. If you would like to page the paired scanner, you can press the paging/rest button
of the smart cradle no longer than 5 seconds.
Paging
Paging/Reset Button
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Batch Scanning (Inventory Mode)
Thanks to the specially designed Batch Scanning function, the scanner is capable of storing the barcode data up to 20,000
EAN-13 labels. It is an ideal cost-saving solution for inventory applications.
Once you scan the “Enter Batch Scanning” command to activate this function, all scanned barcode data will be stored into
the memory storage, and the status indicator of scanner will give green blink at regular interval during batch scanning. You
can scan and store the barcode data till the memory storage is full. If the storage is full, you will hear 2 long beeps and the
status indicator will give 2 red blinks to indicate out of storage. To terminate the batch scanning, please scan the “Exit Batch
Scanning” command.
Enter Batch Scanning
Exit Batching Scanning
How to Transmit Stored Data
The scanner is preset to scan the “Transmit Stored Data” command to transmit all stored data. During the transmission
process, the scanner will give continuous short clicks and blue blinks. Then the scanner will give two short beeps after data
transmission is completed.
Transmit Stored Data
But you are still able to set the scanner to transmit the stored data by placing the scanner onto the cradle as well.
Transmit Stored Data by Scanning
Barcode Command
Transmit Stored Data by Scanning Barcode
or Placing Scanner onto Cradle
Transmit Stored Data by
Placing Scanner onto Cradle
The scanner is preset to keep all the stored data until you scan the “Clear All Stored Data” command. But you are still able to
change the setting to “Auto Delete Stored Data after Transmission” as well.
Clear All Stored Data
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Auto Delete Stored Data
after Transmission
Keep Stored Data after
Transmission
If you scanned a wrong barcode, the “Delete Last Scanned Data’’ command is helpful to recover mistake. By scanning the
‘’Delete Last Scanned Data’’ command, the last stored data can be deleted.
Delete Last Scanned Data
Using Quantity Feature
If you want to input the quantity information of barcode data, you can enter the quantity from 1 to 9999 by scanning the
quantity barcodes right after you scanned the barcode data. The quantity information will be stored into the memory storage
together with the barcode data.
Quantity 0
Quantity 1
Quantity 2
Quantity 5
Quantity 6
Quantity 7
Quantity 3
Quantity 4
Quantity 8
Quantity 9
There are two ways to output the stored barcode data and quantity information. Please refer to following for details:
ꢁ
ꢁ
Stored data is transmitted as many times as the quantity indicated.
Stored data is transmitted together with quantity information in two fields. Please scan “Enable Quantity Field
Transmission” command to enable this function. The preset delimiter is “ “, but you are able to choose your desired one
from FuzzyScan Wireless Reference Manual for details.
Disable Quantity Field Transmission
Enable Quantity Field Transmission
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Bar Code Programming Menu
The FuzzyScan bar code commands are specially designed
Proprietary bar code labels which allow you to set the
FuzzyScan internal programming parameters. There are
System Command, Family Code and Option Code for
programming purpose.
System Command
The System Command is the highest level bar code
command which directs FuzzyScan to perform immediate
operations, such as entering programming mode
(PROGRAM), exiting programming mode (EXIT), listing
system information (SYSLIST), recovering to factory
preset configurations (M_DEFAULT), and so on. Please
note that all system commands will take a few seconds to
complete the operations. User must wait for the
completion beeps before scanning another bar code.
Each programmable family and bar code command label is
listed on the same page with major system commands. The
detailed explanations and special programming flowchart are
printed on facing or following pages. You can read the
explanation and set the FuzzyScan concurrently.
A supplemental bar code command menu incorporates the
bar code command labels of System Command and Option
Code. As you set the FuzzyScan, open the bar code
command menu to find the option code page. You may scan
the desired family code and option code to set FuzzyScan. If
you want to change the programming family for multiple
settings, you need only turn over the programming page to
find next desired programming family.
Family Code
The Family Code is scanned to select the user desired
programming family. FuzzyScan has already provided
more than one hundred programming families to meet any
specific requirements.
Option Code
The Option Codes is a set of bar code commands
represented by “0–9”, “A–F” and finishing selection (FIN).
For most setting, you must select at least one option code
following the family code selection to set the desired
parameter for the selected programming family.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
If the programming family must take multiple scans
Programming Procedures
selection, cycling scan selection, or dual level selection
procedures, the family of the programming menu will be
marked with the matched representing symbol of
Programming Category (P.C.) in bold font listed in the
following table. You can easily find the bold mark in the
programming menu, and refer to their flowcharts for details.
Before setting the FuzzyScan, please also refer to the
“Beeping Indications” listed in Appendix to understand the
details of programming beeping indications. It will be very
helpful for you to know the existing status while you are
programming the FuzzyScan.
As you scan the bar code command to select the desired
parameters, information about the final selected parameters
represented by the bar code commands are stored in the
FuzzyScan’s internal Flash Memory ASIC or non-volatile
memory. If you turn off the unit, the Flash Memory ASIC or
non-volatile memory retains all programming options. You
need not re-program the FuzzyScan if you want to keep the
existing configurations in the next power on.
The programming procedures of FuzzyScan are designed
as simple as possible for ease of setting. Most
programming families take the Single Scan Selection
programming procedure. But several programming families
have more complex and flexible programmable options,
and you must take Multiple Scans Selection, Cycling
Scan Selection or Dual Level Selection to complete their
programming procedures. Each kind of programming
procedure is listed in the following pages for your reference.
Please give careful attention to become familiar with each
programming procedure.
Conventions of Programming Menu
Conventions
Descriptions
Factory Default Value
Programming Category
ꢂ
P.C.
SS : Signle scan selection
MS : Multiple scans selection
CS : Cycling scan selection
DS : Dual level scan selection
(
[
)
]
Necessary Option Code
Selectable Option Code
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Program & End
System List, Group & Master Default
Scan
Scan
“
”
SYSLIST
“PROGRAM”
FuzzyScan will list the product information and
revision number to host via selected host interface,
then issue the completion beeping.
FuzzyScan will enter programming mode,
and inhibit all non-programming functions.
Scan
Scan
“M_DEFAULT”
“END”
FuzzyScan will recover all programmable
parameters into factory preset configurations,
then issue the completion beeping.
FuzzyScan will exit programming mode, and store all
parameters in Flash Memory ASIC or non-volatile memory,
then issue the completion beeping.
Please note that the FuzzyScan will take 3-4 seconds to
store parameters in internal Flash Memory ASIC or
non-volatile memory after you scan the “END”. Please
don’t turn off the power before the completion beeping. It
may destroy all configured parameters.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Single scan selection
Multiple scans selection
Scan
Scan
Enter programming mode.
“PROGRAM”
Enter programming mode.
“
”
PROGRAM
Select one of desired
programming families.
Select one of desired
programming families.
Scan
Scan
One of Family Codes
One of Family Codes
1. Select one or several
option codes to select
desired parameters.
Select one option code of
desired parameter.
Scan One or
Scan
Several Option Codes
One of Option Codes
2. If it’s necessary, scan
“FIN” to terminate
Yes
Want to select another
programming family?
Yes
option code selection.
Repeat
Repeat
Selection
Selection
Want to select another
programming family?
No
No
Scan
Scan
Exit programming mode.
Exit programming mode.
“END”
“
”
END
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Cycling scan selection
Dual level selection
Scan
Scan
Enter programming mode.
“PROGRAM”
Enter programming mode.
“PROGRAM”
Select one of desired
programming families.
Select one of desired
programming families.
Scan
Scan
One of Family Codes
One of Family Codes
Cycling select one or
several option codes of
desired parameters as
“Single” or “Multiple”
scans selection.
Select several option codes
of desired parameters.
(1st) Scan
Scan
Several Option Codes
One of Option Codes
1. Select one or several
option codes of desired
parameters.
(2nd) Scan One or
Scan “FIN”
Several Option Codes
2. If it’s necessary, scan
“FIN” to terminate
Finish cycling selection.
(If necessary)
option code selection.
Yes
Yes
Repeat
Repeat
Selection
Selection
Want to select another
programming family?
Want to select another
programming family?
No
No
Scan
Scan
Exit programming mode.
Exit programming mode.
“
”
END
“
”
END
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Host Interface Selection
PROGRAM
F_DEFAULT
Family Code Selection
Host Interface Selection
P.C
Parameter Selection
Option Code
MS
MS
MS
MS
MS
MS
MS
MS
MS
MS
IBM PS/2, 25-30 series keyboard wedge interface
Standard/TTL RS-232 peer-to-peer serial
Wand emulation
02
06
08
09
10
13
14
17
18
19
USB Com Port Emulation
PS/2 (DOS/V) direct link (keyboard replacement)
PS/2 (DOS/V) keyboard wedge turbo mode
PS/2 (DOS/V) keyboard wedge standard mode
Laser emulation
ꢂ
USB HID standard mode
USB HID turbo mode
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ User Defined Symbol ID ♦
PROGRAM
F_DEFAULT
Family Code Selection
Symbol ID : 1 character
P.C
Parameter Selection
Option Code
2nd Option Code
DS
Code 128 (default=B)
GS1-128 (default=C)
UPC-A (default=A)
EAN-13 (default=F)
Codabar/NW-7 (default=D)
Code 39/Code 32 (default=G)
Code 93 (default=H)
Standard/Industrial 2 of 5 (default=I)
Interleaved 2 of 5 (default=J)
Matrix 2 of 5 (default=K)
China Postal Code (default=L)
German Postal Code (default=M)
IATA (default=O)
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
26
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
(1 character)
Code 11 (default=P)
MSI/Plessey (default=R)
UK/Plessey (default=S)
Telepen (default=T)
GS1 DataBar (default=X)
UPC-E (default=E)
EAN-8 (default=N)
Trioptic Code 39 (Default=W)
UCC Coupon Extended Code (Default=Z)
PDF417/Micro PDF417 (default=V)
Codablock F (default=Y)
Korea Post Code (default =a)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Symbology ID Transmission ♦
PROGRAM
F_DEFAULT
Family Code Selection
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
SS
SS
SS
Disable symbology ID transmission
0
1
2
3
4
5
6
Enable prefix CINO symbology ID transmission
Enable suffix CINO symbology ID transmission
Enable both prefix and suffix CINO symbology ID transmission
Enable prefix AIM symbology ID transmission
Enable suffix AIM symbology ID transmission
Enable both prefix and suffix AIM symbology ID transmission
Symbology ID Transmission
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Readable Bar Code Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Readable Symbology Setting
P.C
Parameter Selection
Option Code
ꢂ
SS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
Auto
00
01
02
03
04
05
06
07
47
08
38
48
58
68
09
10
11
12
13
14
15
17
18
21
Code 128 *
UPC-A *
UPC-E *
EAN-13 *
EAN-8 *
Codabar/NW-7 *
Code 39 *
Trioptic Code 39
Standard/Industrial 2 of 5
Matrix 2 of 5
Interleaved 2 of 5 *
China Postal Code
German Postal Code
Code 93 *
Code 11
MSI/Plessey
UK/Plessey
Telepen
GS1 DataBar (RSS-14) *
IATA
PDF417/Micro PDF417
Codablock F
Korea Post Code
ꢃ
If your application is known, you may select those known symbologies only to increase the reading speed and decrease the possibility of reading error. Furthermore, to add
the “Symbology ID” into the transmitted data is also helpful to identify the specific symbology.
ꢃ
ꢃ
Above symbologies marketed with * are enable as default. When you select “Auto”, the scanner only read those symbologies marked with *
When you set the minimum and maximum length of each symbology, please note the data length of scanned bar code doesn’t include star/stop characters.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Code 39/Code 32 Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Code 39 Family Setting
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
Disable Code 39
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
ꢂ
Enable Code 39
Select Standard Code 39 as primary format
ꢂ
Select Full ASCII Code 39 as primary format
Select Code 32 (PARAF, Italian Pharmaceutical) as primary format
ꢂ
Disable start/stop symbol transmission
Enable start/stop symbol transmission
ꢂ
Disable Code 32 leading A transmission
Enable Code 32 leading A transmission
Disable MOD 43 check digit verification
Enable MOD 43 check digit verification
ꢂ
ꢂ
Disable check digit transmission
Enable check digit transmission
ꢂ
Disable Code 39 buffering
Enable Code 39 buffering
ꢂ
SS
SS
Disable Trioptic Code 39
Enable Trioptic Code 39
0
1
Trioptic Code 39 Setting
Code 39 Min. Length
Code 39 Max. Length
ꢂ
SS
MS
Default (01)
FIN
(2 digits)
01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
Default (98)
98-Minimum
FIN
(2 digits)
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢃ
Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Code 39 Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Code 39 Security Level
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
Level 0
Level 1
Level 2
Level 3
0
1
2
3
ꢂ
ꢃ
Code 39 Security Level
The scanner offers four levels of decode security for Code39 bar codes:
Level 0: If you are experiencing misread of poorly-printed or serious out-of-spec. bar codes in level 1, please select level 0.
Level 1: If you are experiencing misread of poorly-printed or out-of-spec. bar codes in level 2, please select level 1.
Level 2: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding “in-spec” Code39 bar codes.
Level 3: If you failed to read poorly-printed or out-of-spec. bar codes in level 2, please select level 3. This is the most aggressive setting and may increase the misread.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Codabar/NW-7 Setting ♦
PROGRAM
Family Code Selection
Codabar Setting
F_DEFAULT
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
Disable Codabar
Enable Codabar
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
ꢂ
ꢂ
Select Codabar standard format
Select Codabar ABC format
Select Codabar CLSI format
Select Codabar CX format
ꢂ
Disable start/stop symbol transmission
Enable ABCD/ABCD start/stop symbol transmission
Enable abcd/abcd start/stop symbol transmission
Enable ABCD/TN*E start/stop symbol transmission
Enable abcd/tn*e start/stop symbol transmission
ꢂ
Disable check digit verification
Enable check digit verification
ꢂ
Disable check digit transmission
Enable check digit transmission
ꢂ
SS
SS
SS
SS
SS
SS
SS
Modulus 16
0
1
2
3
4
5
6
Codabar Check Digit Settings
Modulus 10/weight 3
Modulus 11
Modulus 10/weight 2
7 check DR
Weight Modulus 11
Runes (Modulus 10/weight 2)
ꢂ
SS
MS
Default (04)
FIN
(2 digits)
Codabar Min. Length
01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Codabar/NW-7 Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Codabar Max. Length
P.C
Parameter Selection
Option Code
ꢂ
SS
MS
Default (98)
98-Minimum
FIN
(2 digits)
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ UPC-A & UPC-E Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
UPC Family Setting
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
Disable UPC-A
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
ꢂ
ꢂ
Enable UPC-A
Disable UPC-E
Enable UPC-E
Disable UPC-E expansion
Enable UPC-E expansion
ꢂ
ꢂ
ꢂ
Disable UPC standardization
Enable UPC standardization
Disable UPC numeric system
Enable UPC numeric system
Disable UPC-A check digit transmission
Enable UPC-A check digit transmission
Disable UPC-E check digit transmission
Enable UPC-E check digit transmission
ꢂ
ꢂ
ꢂ
Disable UPC “leading 1” portion
Enable UPC “leading 1” portion
ꢃ
When enable UPC-E expansion, the UPC-E decoded data will be converted to UPC-A format and affected by related setting, such as UPC standardization, UPC numeric
system, UPC-A check digit transmission.
ꢃ
ꢃ
ꢃ
UPC-E & EAN-8 Expansion
UPC-A/E Standardization
UPC Lead 1 Numeric System
: Expand the 8-digit UPC-E and 8-digit ENA-8 to 12-digit UPC-A and 13-digit EAN-13.
: Expand the 12-digit UPC-A to 13-digit EAN-13 with 1 zero insertion.
: Enable to read UPC leading with the 1 numeric system, you must enable this option.
WPC Selection
(UPC/EAN/CAN)
Disable
Check Digit
Disable
Numeric System
With 2-digit
Addendum
With 5-digit
Addendum
Enable
Standardization
Enable
Expansion
Basic Length
UPC-A
UPC-E
EAN-13
EAN-8
12
8
13
8
- 1
- 1
- 1
- 1
- 1
- 1
NC
NC
+ 2
+ 2
+ 2
+ 2
+ 5
+ 5
+ 5
+ 5
+ 1
+ 1
NC
NC
0
+ 4
0
+ 5
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ UPC-A & UPC-E Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
UPC Supplement Setting
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
SS
SS
SS
SS
Select UPC without supplement digits
0
1
2
3
4
5
6
7
Select UPC with only 2 supplement digits
Select UPC with only 5 supplement digits
Select UPC with 2/5 supplement digits
ꢂ
Disable force supplement digits output
Enable force supplement digits output
ꢂ
UPC Family Addenda Separator Off
UPC Family Addenda Separator On
SS
SS
Level 0
Level 1
Level 2
0
1
UPC/EAN Security Level
Supplement Scan Voting
ꢂ
SS
2
Only available for UPC-A & EAN-13
SS
SS
SS
SS
SS
SS
SS
None
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Level 7
Level 8
Level 9
Level 10
Level 11
Level 12
Level 13
0
1
2
3
4
5
6
7
8
9
A
B
C
D
ꢂ
ꢃ
UPC/EAN Security Level
The scanner offers three levels of decode security for UPC/EAN bar codes:
Level 0: If you are experiencing misread of poorly-printed or out-of-spec. bar codes, especially in characters 1, 2, 7, and 8 in level 1, please select level 0. Selection of this
security level may significantly impair the decoding ability of the scanner.
Level 1: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding “in-spec” UPC/EAN bar codes.
Level 2: If you are experiencing misread of poorly-printed, soiled or damage bar codes in level 1, please select level 2. This is the most aggressive setting and may
increase the misread.
ꢃ
The Supplement Scan Voting is the number of times the same UPC/EAN with 2/5 supplement digits has to be decoded before it is transmitted. It is helpful when decoding
a mix of UPC/EAN symbols with and without supplement digits. This function is effective when you select UPC/EAN with only 2 supplement digits, UPC/EAN with only 5
supplement digits or UPC/EAN with 2/5 supplement digits. The default value is Level 3. When you select higher level, it may impact the reading speed on poorly-printed,
low contrast or damage barcode labels.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ EAN Setting ♦
PROGRAM
Family Code Selection
EAN Setting
F_DEFAULT
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
Disable EAN-13
Enable EAN-13
Disable EAN-8
0
1
2
3
4
5
6
7
8
9
A
B
ꢂ
ꢂ
Enable EAN-8
ꢂ
Disable EAN-8 expansion
Enable EAN-8 expansion
Disable EAN-13 check digit transmission
Enable EAN-13 check digit transmission
Disable EAN-8 check digit transmission
ꢂ
ꢂ
Enable EAN-8 check digit transmission
ꢂ
Disable ISBN/ISSN Conversion reading check
Enable ISBN/ISSN Conversion reading check
ꢂ
SS
SS
SS
SS
SS
SS
SS
SS
Select EAN without supplement digits
0
1
2
3
4
5
6
7
EAN Supplement Setting
Select EAN with only 2 supplement digits
Select EAN with only 5 supplement digits
Select EAN with 2/5 supplement digits
ꢂ
Disable force supplement digits output
Enable force supplement digits output
ꢂ
EAN Addenda Separator Off
EAN Addenda Separator On
SS
SS
SS
SS
SS
SS
SS
None
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Level 7
Level 8
Level 9
Level 10
Level 11
Level 12
Level 13
0
1
2
3
4
5
6
7
8
9
A
B
C
D
Supplement Scan Voting
ꢂ
ꢃ
The Supplement Scan Voting is the number of times the same UPC/EAN with 2/5 supplement digits has to be decoded before it is transmitted. It is helpful when decoding
a mix of UPC/EAN symbols with and without supplement digits. This function is effective when you select UPC/EAN with only 2 supplement digits, UPC/EAN with only 5
supplement digits or UPC/EAN with 2/5 supplement digits. The default value is Level 3. When you select higher level, it may impact the reading speed on poorly-printed,
low contrast or damage barcode labels.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ EAN Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
UPC/EAN Security Level
P.C
Parameter Selection
Option Code
SS
SS
Level 0
Level 1
Level 2
0
1
ꢂ
SS
2
Only available for UPC-A & EAN-13
ꢂ
SS
SS
SS
SS
SS
SS
SS
SS
Disable all specific prefix supplement digital output
Enable all specific prefix supplement digital output
Enable 491 Supplement Digit Output
Enable 978/979 Supplement Digit Output
Enable 977 Supplement Digit Output
Enable 378/379 Supplement Digit Output
Enable 414/419 Supplement Digit Output
Enable 434/439 Supplement Digit Output
0
1
2
3
4
5
6
7
EAN Supplement Control
ꢃ
UPC/EAN Security Level
The scanner offers three levels of decode security for UPC/EAN bar codes:
Level 0: If you are experiencing misread of poorly-printed or out-of-spec. bar codes, especially in characters 1, 2, 7, and 8 in level 1, please select level 0. Selection of this
security level may significantly impair the decoding ability of the scanner.
Level 1: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding “in-spec” UPC/EAN bar codes.
Level 2: If you are experiencing misread of poorly-printed, soiled or damage bar codes in level 1, please select level 2. This is the most aggressive setting and may
increase the misread.
ꢃ
EAN Supplement Control
If you select EAN with only 2, or 5 or 2/5 supplement digits and enable 491 prefix supplement digit output, the scanner will transmit EAN with 2, or 5 or 2/5 supplement
digits bar codes starting with 491 prefix. The EAN without supplement digit will not be transmitted.
If you select EAN with only 2, or 5 or 2/5 supplement digits and enable the other except 491 prefix supplement digit output, the scanner will transmit EAN with 2, or 5, or 2/5
supplement digits bar codes starting with specific prefix. The EAN without supplement digit will be transmitted.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ UCC Coupon Extended Code Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
UCC Coupon Extended Code
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
Disable UCC Coupon Extended Code
Enable UCC Coupon Extended Code
0
1
ꢃ
UCC Coupon Extended Code
When UCC coupon extended code function is enabled, scanner decodes UPC-A barcodes starting with digit “5”, EAN-13 barcodes starting with digit “99” and GS1-128
Coupon Codes. UPC-A, EAN-13 and EAN-128 must be enabled to scan all types of Coupon Codes.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ IATA & Interleaved 2 of 5 Setting ♦
PROGRAM
Family Code Selection
IATA Setting
F_DEFAULT
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
Disable IATA
Enable IATA
0
1
2
3
4
5
6
7
8
9
A
B
C
ꢂ
Select 15-digit fixed length IATA checking
Select variable length IATA
ꢂ
Disable check digit verification
Enable check digit automatic verification
Enable S/N checking digit verification only
Enable CPN checking digit verification only
Enable CPN, Airline and S/N check digit verification
ꢂ
Disable check digit transmission
Enable check digit transmission
ꢂ
Disable start/stop symbol transmission
Enable start/stop symbol transmission
SS
SS
SS
SS
SS
SS
SS
SS
SS
Disable Interleaved 2 of 5
0
1
2
3
4
5
6
7
8
Interleaved 2 of 5 Setting
ꢂ
Enable Interleaved 2 of 5
Select Interleaved 2 of 5 as primary format
Select German Postal Code as primary format
ꢂ
ꢂ
No check character
Validate USS check digit
Validate OPCC check digit
Disable check digit transmission
Enable check digit transmission
ꢂ
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Code 25 Family Setting ♦
PROGRAM
Family Code Selection
Code 25 Setting
F_DEFAULT
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
Disable Standard/Industrial 2 of 5
Enable Standard/Industrial 2 of 5
0
1
2
3
4
5
6
7
8
9
ꢂ
Disable Matrix 2 of 5
Enable Matrix 2 of 5
ꢂ
Disable China Postal Code
Enable China Postal Code
ꢂ
Disable check digit verification
Enable check digit verification
ꢂ
Disable check digit transmission
Enable check digit transmission
ꢂ
SS
MS
Default (04)
FIN
(2 digits)
Code 25 Family Min. Length
Code 25 Family Max. Length
01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
Default (98)
98-Minimum
FIN
(2 digits)
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢃ
For Code25 setting, we recommend you to select only one type of Code 25 or set the maximum/minimum bar code length. To decode all types of Code 25 or to variable
length of Code 25 will increase the possibility of reading error.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Code 11 & Code 93 Setting ♦
PROGRAM
Family Code Selection
Code 11 Setting
F_DEFAULT
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
SS
SS
SS
Disable Code 11
Enable Code 11
0
1
2
3
4
5
6
ꢂ
Disable check digit verification
Select 1-check digit verification
Select 2-check digit verification
ꢂ
Disable check digit transmission
Enable check digit transmission
ꢂ
SS
MS
Default (04)
FIN
(2 digits)
Code 11 Min. Length
Code 11 Max. Length
Code 93 Setting
01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
Default (98)
98-Minimum
FIN
(2 digits)
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
SS
SS
SS
SS
Disable Code 93
Enable Code 93
Disable check digit transmission
Enable check digit transmission
0
1
2
3
ꢂ
ꢂ
ꢂ
SS
MS
Default (01)
FIN
(2 digits)
Code 93 Min. Length
Code 93 Max. Length
01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
Default (98)
98-Minimum
FIN
(2 digits)
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ MSI/Plessey Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
MSI/Plessey Setting
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
SS
SS
SS
Disable MSI/Plessy
Enable MSI/Plessy
0
1
2
3
4
5
6
ꢂ
Select MOD 10 check digit
Select MOD 10-10 check digit
Select MOD 11-10 check digit
Disable check digit transmission
Enable check digit transmission
ꢂ
ꢂ
SS
MS
Default (04)
FIN
(2 digits)
MSI/Plessey Min. Length
MSI/Plessey Max. Length
01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
Default (98)
98-Minimum
FIN
(2 digits)
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Code 128 & UCC/EAN 128 Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Code 128/EAN-128 Setting
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
Disable Code 128 and GS1-128
0
1
2
3
4
5
ꢂ
Enable Code 128 and GS1-128
ꢂ
Disable function code conversion
Enable function code conversion
ꢂ
ISBT Concatenation Off
ISBT Concatenation On
ꢂ
SS
MS
Default (01)
FIN
(2 digits)
Code 128/EAN-128 Min. Length
Code 128/EAN-128 Max. Length
01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
Default (98)
98-Minimum
FIN
(2 digits)
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ UK/Plessey Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
UK/Plessey Setting
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
SS
SS
SS
SS
Disable UK/Plessey
Enable UK/Plessey
0
1
2
3
4
5
6
7
ꢂ
Select UK/Plessey Standard Format
Select UK/Plessey CLSI Format
ꢂ
Disable Convert X to A-F
Enable Convert X to A-F
ꢂ
Disable check digit transmission
Enable check digit transmission
ꢂ
SS
MS
Default (04)
FIN
(2 digits)
UK/Plessey Min. Length
UK/Plessey Max. Length
01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
Default (98)
98-Minimum
FIN
(2 digits)
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Telepen Setting ♦
PROGRAM
Family Code Selection
Telepen Setting
F_DEFAULT
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
SS
SS
Disable Telepen
Enable Telepen
0
1
2
3
4
5
ꢂ
Select Telepen Numeric mode
Select Telepen Full ASCII mode
Disable check digit transmission
Enable check digit transmission
ꢂ
ꢂ
SS
MS
Default (04)
FIN
(2 digits)
Telepen Min. Length
Telepen Max. Length
01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
Default (98)
98-Minimum
FIN
(2 digits)
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ GS1 DataBar Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
GS1 DataBar Setting
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
Disable GS1 DataBar (RSS-14)
0
1
2
3
4
5
ꢂ
Enable GS1 DataBar (RSS-14)
Disable GS1 DataBar Limited
ꢂ
Enable GS1 DataBar Limited
Disable GS1 DataBar Expanded
Enable GS1 DataBar Expanded
ꢂ
ꢂ
SS
MS
Default (04)
FIN
(2 digits)
GS1 DataBar Min. Length
GS1 DataBar Max. Length
01-Maximum
Only available for Expanded GS1 Databar.
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
Default (74)
74-Minimum
FIN
(2 digits)
Only available for Expanded GS1 Databar.
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Symbology Reading Control
♦ Linear-stacked & Korea Post Code Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Composite Codes Setting
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
Disable composite codes
Enable composite codes
0
1
2
3
ꢂ
UPC Composite Mode: UPC never linked
UPC Composite Mode: UPC always linked
SS
SS
SS
SS
Disable PDF417
Enable PDF417
Disable MicroPDF417
Enable MicroPDF417
0
1
2
3
PDF417/MicroPDF417 Setting
Codablock F Setting
ꢂ
ꢂ
ꢂ
SS
SS
Disable
Enable
0
1
ꢂ
SS
SS
Disable
Enable
0
1
Korea Post Code Setting
Length fixed in 6 characters.
ꢃ
Composite Codes Setting
If UPC Composite Mode: UPC never linked is selected, UPC barcodes are transmitted regardless of whether a MicroPDF417 symbol is detected.
If UPC Composite Mode: UPC always linked is selected, UPC barcodes are only transmitted when the MicroPDF417 is detected.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Keyboard Interface Control
♦ Keyboard Layout (Language) Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Keyboard Layout
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
USA (QWERTY)
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
France (AZERTY)
Germany (QWERTZ)
United Kingdom - UK (QWERTY)
Canadian French (QWERTY)
Spain (Spanish, QWERTY)
Sweden/Finland (QWERTY)
Portugal (QWERTY)
Norway (QWERTY)
Spain (Latin America, QWERTY)
Italy (QWERTY)
Netherlands (QWERTY)
Denmark (QWERTY)
Belgium (AZERTY)
Switzerland-Germany (QWERTY)
Iceland (QWERTY)
Japan (DOS/V)
Czech (QWERTY)
ꢃ
ꢃ
ꢃ
Please refer to the ASCII/HEX Table listed in the Appendix to determine HEX codes for characters, symbols, and functions to be used as premble or postamble.
To set preamble or postamble as function key output, you must enable the “Function Key Emulation” feature as listed in page 3-25 first.
Keyboard Interface Message String :
Preamble
Data Length
2-3 digits
Prefix Symbol ID
1 or 2 characters
Scanned Data
Suffix Symbol ID
1 or 2 characters
Postamble
Record Suffix
1 character
1-15 characters
Variable length
1-15 characters
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Keyboard Interface Control
♦ Record Suffix, Preamble, Postamble & Caps Lock ♦
PROGRAM
Family Code Selection
Record Suffix
F_DEFAULT
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
None
RETURN
TAB
0
1
2
3
4
ꢂ
SPACE
ENTER (Numeric Key Pad)
User defined character (1 character)
5, (00-7F)
ꢂ
SS
MS
None
FIN
[00-7F], [FIN]
Preamble
Postamble
1-15 characters
Maximum 15-character input; scan “FIN” to terminate this selection.
ꢂ
SS
MS
None
FIN
[00-7F], [FIN]
1-15 characters
Maximum 15-character input; scan “FIN” to terminate this selection.
ꢂ
SS
SS
SS
“Caps Lock Off” State
“Caps Lock On” State
0
1
2
Caps Lock Control
Caps Lock Release Control
Auto Detect (PC/AT, PS/2, Keyboard Replacement and DOS/V Machines only)
ꢂ
SS
SS
“Caps Lock On, Caps Off”
“Caps Lock On, Shift Off”
0
1
ꢃ
ꢃ
The function of “Caps Lock Control” and “Key Pad Emulation” are only available for IBM PC/AT, PS/VP, PS/2 series personal computers and compatible machines.
While selecting the other host interfaces, these selections don’t perform the above functions for you.
Please check the actual Caps Lock state in use while software application is running. If the Caps Lock state is off, select “Caps Lock Off” state, then FuzzyScan will
perform normal data transmission. If the Caps Lock state is on, select “Caps Lock On” state. Select “Auto Detect”, FuzzyScan will perform special transmission
handshaking without changing the status of Caps Lock switch.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Keyboard Interface Control
♦ Delay Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Intermessage Delay
P.C
Parameter Selection
Option Code
ꢂ
SS
MS
None
FIN
(2 digits)
1-99 (x10) msec.
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
None
FIN
(2 digits)
Intercharacter Delay
Interfunction Delay
1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
None
FIN
(2 digits)
1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢃ
ꢃ
Intermessage Delay is a time delay between messages output by FuzzyScan. Increasing this delay will help host applications process the incoming data on time.
Intercharacter Delay is a time delay between data characters output by FuzzyScan. These two parameters are used to synchronize data communication when : 1) the data
transmission speed is too fast, characters may be skipped; 2) multitasking operation system or host computers in a network may slow down the keyboard handling; 3)
various notebook or desktop PC systems require different timing parameter settings. Please always add one extra unit as safety margin when adjusting these two
parameters.
ꢃ
ꢃ
Interfunction Delay is a time delay between the transmission of each segment of the message string.
Intermessage Delay, Intercharacter Delay and Interfunction Delay cannot be only worked under SPP and HID modes.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Keyboard Interface Control
♦ Emulation Setting & Upper/Lower Case Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Function Key Emulation
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
Enable ASCII 00-31 code as keyboard function code output
Ctrl-Output
0
1
Refer to Appendix – Keyboard Function Code Table for details.
ꢂ
SS
SS
Disable key pad emulation
0
1
Key Pad Emulation
Upper/Lower Case
Enable numeric output as key pad (Num Lock On) output
ꢂ
SS
SS
SS
SS
Normal case (neglect the upper/lower case control)
0
1
2
3
Inverse case (change all characters output to inverse case)
Upper case (force all characters output as upper case)
Lower case (force all characters output as lower case)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Serial Interface Control
♦ Record Suffix, Preamble ,Postamble Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
STX/ETX Control
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
Disable STX/ETX transmission
Enable STX/ETX transmission
0
1
STX/ETX are two characters used to indicate the starting and ending of the total
data frame transmitted via serial interface.
SS
SS
SS
SS
SS
SS
MS
None
CR (0DH)
LF (0AH)
CRLF (0D0AH)
TAB (09H)
0
1
2
3
4
5
Record Suffix
ꢂ
SPACE (20H)
User defined character (1 character)
6, (00-7F)
ꢂ
SS
MS
None
FIN
[00-7F], [FIN]
Preamble
1-15 characters
Maximum 15-character input; scan “FIN” to terminate this selection.
ꢂ
SS
MS
None
FIN
[00-7F], [FIN]
Postamble
1-15 characters
Maximum 15-character input; scan “FIN” to terminate this selection.
ꢃ
Serial Interface Message String (RS232, USB COM) :
STX
Preamble
Data Length
2-3 digits
Prefix Symbol ID Scanned Data
Suffix Symbol ID
Postamble
ETX
Record Suffix
1 character
1 character
1-15 characters
1 or 2 characters Variable length 1 or 2 characters 1-15 characters
1 character
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Serial Interface Control
♦ Delay Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Intermessage Delay
P.C
Parameter Selection
Option Code
ꢂ
SS
MS
None
FIN
(2 digits)
1-99 (x10) msec.
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
None
FIN
(2 digits)
Intercharacter Delay
Interfunction Delay
1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢂ
SS
MS
None
FIN
(2 digits)
1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
ꢃ
ꢃ
Intermessage Delay is a time delay between messages output by FuzzyScan. Increasing this delay will help host applications process the incoming data on time.
Intercharacter Delay is a time delay between data characters output by FuzzyScan. These two parameters are used to synchronize data communication when : 1) the data
transmission speed is too fast, characters may be skipped; 2) multitasking operation system or host computers in a network may slow down the keyboard handling; 3)
various notebook or desktop PC systems require different timing parameter settings. Please always add one extra unit as safety margin when adjusting these two
parameters.
ꢃ
ꢃ
Interfunction Delay is a time delay between the transmission of each segment of the message string.
Intermessage Delay, Intercharacter Delay and Interfunction Delay cannot be only worked under SPP and HID modes.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Serial Interface Control
♦ Protocol, ACK/NAK Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Handshaking Protocol
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
None (free running mode)
0
1
2
3
RTS/CTS (hardware handshaking)
ACK/NAK (software handshaking)
Xon/Xoff (software handshaking)
ꢂ
SS
SS
3 times
FIN
(3 digits)
NAK Retry Count
ACK Indication
0~255 times
SS
SS
SS
SS
Disable ACK Time-out Indication
Enable ACK Time-out Indication
Disable ACK Indication
Enable ACK Indication
0
1
2
3
ꢂ
ꢂ
ꢃ
ꢃ
USB COM doesn’t support RTS/CTS handshaking protocol.
When the ACK/NAK Software Handshaking option is selected, the FuzzyScan waits for an ACK (acknowledge) or NAK (not acknowledge) from the host computer after
each data transmission. If the NAK is received, FuzzyScan will re-send the data until receiving ACK.
ACK/NAK handshaking protocol is workable under following conditions:
1) Pair mode by using RS232 or USB COM interface.
2) SPP master or slave mode.
ꢃ
NAK Retry Count
After transmitting data, the scanner expects a NAK response from the host up to the preset “Serial Response Time-out”. If the scanner doesn’t get a response, the scanner
will issue an error indication and discard the data. When a NAK is received, the scanner transmits the same data again and waits for either an ACK or NAK. The scanner
issues an error indication and discards the data under following two conditions:
1) After preset NAK retry counts is received within the preset serial response time-out.
2) If the preset time-out is up but the preset NAK retry counts haven’t come to the end.
The default retry counts are three times. If you program “0 time”, the scanner won’t resend the data to the host when the scanner receives a NAK. The scanner will discard
the data. If you program “255 times”, the scanner can receive unlimited NAKs from the host within the pre-set serial response time-out.
This function is not available for batch mode. When you enable this function in on-line mode, the out-of-range function will be disable automatically.
ꢃ
ACK Indication:
Disable: There’s neither LED nor beeping indication for this setting.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Enable: There’s a specific LED and beeping indication for this setting.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Serial Interface Control
♦Time Out Setting, Baud Rate, Data Frame ♦
PROGRAM
F_DEFAULT
Family Code Selection
Serial Response Time-out
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
None
3 seconds
4 seconds
5 seconds
8 seconds
10 seconds
15 seconds
0
1
2
3
4
5
6
7
8
9
A
B
200 mseconds
500 mseconds
800 mseconds
1 second
ꢂ
2 seconds
SS
SS
SS
SS
38.4K BPS
19.2K BPS
2400 BPS
1200 BPS
57.6K BPS
115.2K BPS
0
1
2
3
4
5
8
9
Baud Rate (BPS)
Data Frame
ꢂ
9600 BPS
4800 BPS
ꢂ
SS
SS
SS
SS
SS
SS
SS
SS
8, None, 1
8, Odd, 1
8, Even, 1
8, Space, 1
8, Mark, 1
8, None, 2
7, Odd, 1
7, Space, 1
7, Mark, 1
7, None, 2
7, Odd, 2
7, Even, 2
7, Space, 2
7, Mark, 2
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
7, Even, 1
ꢃ
ꢃ
When the RTS/CTS Hardware Handshaking option is selected, the RTS (request to send) and CTS (clear to send) signals will be issued before normal data
communication. This option is very helpful to ensure the reliability of data communication.
The Serial Response Time-out is a pre-defined delay time for FuzzyScan to wait for handshaking, acknowledgment or non-acknowledgment from the host computer.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Wand/Laser Emulation Control
♦ Code 39/Code 128 Emulation ♦
PROGRAM
Family Code Selection
Output Polarity
F_DEFAULT
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
High level (5Vdc) on Bar (low level on Space)
Low level (0Vdc) on Bar (high level on Space)
0
1
Determine the output voltage level for both bar and space.
ꢂ
SS
SS
High Level (5Vdc)
Low Level (0Vdc)
0
1
Initial Signal State
Margin Time
Determine the initial state of output voltage level.
SS
SS
SS
SS
10 msec.
15 msec.
20 msec.
25 msec.
30 msec.
50 msec.
100 msec.
Delay time before data transmission
0
1
2
3
4
5
6
ꢂ
SS
SS
SS
Extremely short
Short
Long
0
1
2
3
Module Time
ꢂ
Medium
Time base of minimum narrow bar
ꢂ
1:2.5
1:3
SS
SS
SS
1:2
0
1
2
Narrow/Wide Ratio
Code 39/Code 128 Emulation
ꢂ
SS
SS
SS
SS
Enable standard Code 39 skip emulation
1
2
3
4
Enable standard Code 39 replace emulation
Enable Full ASCII Code 39 emulation
Enable Code 128 emulation
ꢃ
ꢃ
[ Code 39 Skip] : When this option is selected, all scanned data will be translated as Standard Code 39 wand/laser emulation output. If any lower case characters are read,
they will be translated to upper case characters. Any other characters that are not available in Code 39 symbology set will be skipped.
[ Code 39 Replace] : Any character not normally available in the standard Code 39 symbology set, will be translated as Space.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Operation Mode ♦
PROGRAM
Family Code Selection
Operation Mode
F_DEFAULT
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
Trigger mode
1
2
Presentation mode
ꢃ
ꢃ
Trigger Mode (Low Power Triggering) The scanner goes into standby state after scanning the bar code. You must press the trigger to turn on the light source of the
scanner before scanning the bar code.
Presentation Mode (Auto Detection) Presentation mode uses ambient light to detect the bar codes. The light source is off until the scanner detects an image which is
similar to a barcode. Then the light source turns on automatically to read the bar code. If the light level in the room is not high enough, Presentation Mode may not work
properly. You can choose different level of “Presentation Sensitivity” to meet your application (Please refer to the setting of “ Presentation Sensitivity”).
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Buzzer, Indicator, Vibrator, Inverse Reading ♦
PROGRAM
F_DEFAULT
Family Code Selection
Buzzer Tone Adjust
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
SS
Buzzer tone – mute
Buzzer tone – low
Buzzer tone – medium
Buzzer tone – high
0
1
2
3
4
5
6
ꢂ
Buzzer tone - extremely high
ꢂ
Power-on beep
No power-on beep
SS
SS
SS
Disable (LED off)
0
1
2
Power On Indicator
Good Read Indicator
ꢂ
LED steady on
LED flash
SS
SS
Disable
0
1
ꢂ
ꢂ
Enable
SS
SS
Disable
Enable
0
1
Vibrator Control
Inverse Reading
Beeping Control
Optional function, only available for vibrator model.
ꢂ
SS
SS
Disable
Enable
0
1
ꢂ
SS
SS
SS
SS
Radio Connected/ Disconnected Beep On
Radio Connected/ Disconnected Beep Off
Battery Power Low Beep On
Battery Power Low Beep Off
0
1
2
3
ꢂ
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Dollar Sign Control, Redundancy, Scan Rate Control ♦
PROGRAM
F_DEFAULT
Family Code Selection
Dollar Sign Control
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
SS
SS
Dollar sign output as “ $ “
0
1
2
3
4
Dollar sign output as “
“
Dollar sign output as “ € “
Dollar sign output as “ £ “
Dollar sign output as “ ¢ “
SS
SS
SS
SS
SS
SS
None
0
1
2
3
4
5
Redundancy
ꢂ
Level 1
Level 2
Level 3
Level 4
Level 5
To prevent potential miss reading.
ꢂ
SS
SS
Dynamic
Fixed
0
1
Scan Rate Control
ꢃ
ꢃ
The Redundancy is the number of times the same bar code label has to be decoded before it is transmitted.
Scan Rate Control: The scanner will have better motion tolerance when you select “Fixed” scan rate. It’s suitable for application which needs higher motion tolerance on
the move. But this may impact to the reading distance.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Delay Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Reread Delay
(Double Scan Verification)
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
Disable
0
1
2
3
4
5
ꢂ
Immediate time out
Short time out
Medium time out
Long time out
Force verification
ꢂ
SS
SS
SS
SS
SS
SS
SS
None
0
1
2
3
4
5
6
Good Read Delay
200 msec.
500 msec.
1 sec.
1.5 sec.
2 sec.
3 sec.
ꢃ
ꢃ
The Reread Delay (Double Scan Verification) is designed to inhibit FuzzyScan from reading the same bar code label twice in pre-defined short duration. Force Verification
will not allow reading of the same bar code twice.
This Good Read Delay is the minimum amount of time before the scanner can read another bar code.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Time-out Setting, Good Read Duration ♦
PROGRAM
F_DEFAULT
Family Code Selection
Light Source On Time
P.C
Parameter Selection
Option Code
ꢂ
Medium
SS
SS
SS
SS
Short
0
1
2
3
Long
Extremely long
ꢂ
Medium
SS
SS
SS
SS
SS
Short
0
1
2
3
4
Hands Free Time-out
Good Read Duration
Long
Extremely long
Disable
SS
SS
SS
SS
SS
Short
0
1
2
3
4
ꢂ
Medium
Long
Extremely long
Extremely short
SS
SS
SS
SS
SS
SS
1 sec
0
1
2
3
4
5
Time Delay to Low Power Trigger
3 secs
5 secs
7 secs
9 secs
ꢂ
Immediate
ꢃ
ꢃ
The Light Source On Time is a pre-defined light source time out counter for Alternative Mode, Presentation Mode and Level Mode. The scanner keeps the light source on
till the pre-defined light source on time is up. You can adjust this parameter to meet your own application requirement.
The Presentation Mode is referred to as “hands free” mode. The hands free mode will be automatically changed to manual trigger mode when you press the trigger. You
can remain the scanner in manual trigger mode by setting the Hands Free Time-Out. Once the time-out duration is up (if there’s no any trigger operation), the imager will
revert to the original hands free mode.
ꢃ
The Time Delay to Low Power Trigger sets the time for scanner to enter low power trigger mode after any scanning activity.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Presentation Scanning Setting, Laser Aiming Control ♦
PROGRAM
F_DEFAULT
Family Code Selection
SmartStand Power Off Timeout
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
SS
3 mins
5 mins
0
1
2
10 mins
Only available for FuuzzyScan Laser model
ꢂ
SS
SS
Disable
Enable
0
1
Presentation Auto-sense
Presentation Sensitivity
Laser Aiming Control
SS
SS
SS
SS
SS
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Level 7
0
1
2
3
4
5
6
ꢂ
SS
SS
Disable
Enable
0
1
Only available for L series laser imaging scanner.
ꢃ
The SmartStand Power Off Timeout is a pre-defined duration for scanner’s light source on time when the scanner is placed on SmartStand. While the scanner is placed
on SmartStand, the scanner’s will be switched from hand-held scanning to presentation scanning and the light source will be forced on automatically. The light source will
be off when the pre-defined duration is up.
ꢃ
ꢃ
When enable the Presentation Auto-sense, the scanner can be switched between hands free scanning and hand-held scanning automatically when working with the
SmartStand or cradle.
The Presentation Sensitivity is used to configure the sensitivity level when the scanner is set as presentation mode. The higher lever means higher sensitivity for detecting
the barcode.
ꢃ
You can disable or enable laser aiming line when you scan PDF barcode.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦1D Barcode Direction Indication Transmission, etc. ♦
PROGRAM
F_DEFAULT
Family Code Selection
P.C
Parameter Selection
Option Code
SS
SS
None
“S”
0
1
1D Barcode Forward-reading
Indication
MS
User defined character(1 character)
2
2
00-7F
SS
SS
None
“X”
0
1D Barcode Backward-reading
Indication
1
MS
User defined character(1 character)
00-7F
ꢂ
SS
SS
SS
SS
Disable
0
1
2
3
1D Barcode Direction
Indication Transmission
Enable prefix direction mark transmission
Enable suffix direction mark transmission
Enable both prefix and suffix direction mark transmission
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Out-of-range Scanning, Sleep Time-out Control ♦
PROGRAM
F_DEFAULT
Family Code Selection
Out-of-range Scanning
P.C
Parameter Selection
Option Code
ꢂ
SS
SS
Disable
Enable
0
1
SS
SS
SS
SS
SS
1 sec
0
1
2
3
4
Link Supervision Time-out
ꢂ
3 secs
5 secs
7 secs
9 secs
Only available in PAIR & PICO modes
ꢂ
SS
MS
6 (x5) minutes
FIN
(2 digits)
Sleep Time-out of Connect State
Sleep Time-out of Disconnect State
0-99 (x5) minutes
If you don’t want the scanner to enter sleep mode, please set time-out to “0”
ꢂ
SS
MS
1 minute
FIN
(2 digits)
0-99 minutes
If you don’t want the scanner to enter sleep mode, please set time-out to “0”
ꢃ
Out-of-range Scanning When radio link is built between the scanner and remote host device, the scanner will transmit each scanned data right after scanning the barcode
data. However, the scanner is preset for unable to scan any barcode data when it loses the radio connection. You can enable the Out-of-range Scanning function to
continue scanning barcode data into memory buffer until radio link resumed.
ꢃ
ꢃ
The Link Supervision Time-out is a pre-defined radio link supervision timeout setting. The scanner will supervise the radio link status every preset seconds.
The Sleep Time-out Control can be set under radio connection or disconnection state. If the scanner is not used within the preset time-out duration, it will automatically
enter “Sleep State” for power saving purpose. You are able to disable this function by setting the time-out duration to “0”.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Batch Scanning Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Batch Scanning Link Control
P.C
Parameter Selection
Option Code
SS
SS
Radio disable
Radio enable
0
1
ꢂ
SS
SS
SS
All
0
1
2
Stored Data Transmission
On cradle
Scan barcode
ꢂ
ꢂ
SS
SS
Disable
Enable
0
1
Delete Stored Data after
Transmission
ꢃ
The Batch Scanning Link Control is a pre-defined radio option to control the radio-on or radio-off status under batch scanning operation. Please note that if the radio
disable is activated, the radio link will be disconnected once you enter batching scanning. The radio link will be resumed when you transmit the stored data or exit batch
scanning.
ꢃ
ꢃ
The Stored Data Transmission is a pre-defined approach when you want to transmit the scanned data under batch scanning operation. You can transmit the scanned data
by placing the scanner onto the cradle or scanning “Transmit Stored Data” command, or by either one of both methods.
In batching scanning, the default setting of Delete Stored Data after Transmission is disable. The scanner will keep all stored data after transmission until you scan the
“Clear All Stored Data” command. You are also able to delete all stored data after transmission automatically by enabling this function.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Batch Scanning Data Transmission Setting ♦
PROGRAM
Family Code Selection
Field Delimiter
F_DEFAULT
P.C
Parameter Selection
Option Code
SS
SS
SS
SS
SS
SS
None
ꢂ
SPACE
–
0
1
2
3
4
User define
5, [00-7F]
ꢂ
SS
SS
SS
As many times as the quantity indicates
0
1
2
Batch Data Quantity Output Format
Data Transmission Format
<Quantity><Field Delimiter><Scanned Data>
<Scanned Data><Field Delimiter><Quantity>
ꢂ
SS
SS
SS
Disable (scanned data only)
0
1
2
Leading with MAC address (MAC address and scanned data)
Leading with ID No. (scanner ID and scanned data)
Only available for RS232, USB HID and USB COM interface in PAIR & PICO modes
ꢃ
ꢃ
The Field Delimiter is used to separate the specific information and scanned data into two fields. You can choose desired delimiter format.
The Batch Data Quantity Output Format If you want to input the quantity information of barcode data, you can enter the quantity from 1 to 9999 by scanning the quantity
barcodes right after you scanned the barcode data. The quantity information will be stored into the memory storage together with the barcode data. There are three ways to
output the stored barcode data and quantity information.
ꢃ
In PICO mode, up to 7 scanners can be connected with one smart cradle. The Data Transmission Format can help user to identify the source of the transmitted data.
You can choose to transmit the scanned data leading with MAC address or pre-assigned ID.
Example format: <MAC address><Field Delimiter><Data> or <ID><Field Delimiter><Data>.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Bluetooth Device Name & Security Setting♦
PROGRAM
F_DEFAULT
Family Code Selection
Bluetooth Device Name
P.C
Parameter Selection
Option Code
ꢂ
SS
MS
Default device name
FIN
[00-7F], FIN
User define, 1-16 characters
ꢂ
SS
MS
Default Bluetooth PIN Code
User define, 1-8 numbers
FIN
[30-39], FIN
Bluetooth PIN Code
SS
SS
Disable
Enable
0
1
Bluetooth Authentication
ꢂ
ꢃ
ꢃ
ꢃ
The default Bluetooth Device Name is “CINO FxxxBT-xxxx”, you will be able to change the device name by scanning HEX values (1-16 characters).
The default Bluetooth PIN Code is “00000000”, you will be able to change the PIN Code by scanning HEX values (1-8 numbers).
The Bluetooth Authentication You can enable or disable the Bluetooth Authentication between the scanner and remote host device. If this function is enabled, when the
scanner wants to connect itself and sends the data to the host device, the host device has to return a link key shared between the scanner and the host device.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Operation Control
♦ Bluetooth Other Settings ♦
PROGRAM
F_DEFAULT
Family Code Selection
HID Link Quality Setting
P.C
Parameter Selection
Option Code
SS
SS
Disable
Enable
0
1
ꢂ
ꢂ
SS
SS
Disable
Enable
0
1
Bluetooth Power Saving Mode
ꢃ
ꢃ
The HID Link Quality Setting While using the HID radio link mode, some errors may occur during the data transmission when the radio link is disconnected. You can
enable this function to prevent such error from occurring.
The Bluetooth Power Saving Mode Bluetooth module will enter low consumption mode when you enable this function.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Condensed DataWizard
♦ Preamble, Postamble, Data Length & Symbol ID Trans. ♦
PROGRAM
Family Code Selection
Preamble
F_DEFAULT
P.C
Parameter Selection
Option Code
ꢂ
SS
MS
None
FIN
[00-7F], [FIN]
1-15 characters
Maximum 15-character input; scan “FIN” to terminate this selection.
ꢂ
SS
MS
None
FIN
[00-7F], [FIN]
Postamble
1-15 characters
Maximum 15-character input; scan “FIN” to terminate this selection.
ꢂ
SS
SS
Disable
0
1
Data Length Transmission
Symbology ID Transmission
Enable 2 digits data length transmission
If data length exceeds 99, 3-digit data length will be transmitted.
ꢂ
SS
SS
SS
SS
SS
SS
SS
Disable symbology ID transmission
Enable prefix symbology ID transmission
Enable suffix symbology ID transmission
Enable both prefix and suffix symbology ID transmission
Enable prefix AIM symbology ID transmission
Enable suffix AIM symbology ID transmission
Enable both prefix and suffix AIM symbology ID transmission
0
1
2
3
4
5
6
ꢃ
DataWizard is the most powerful, Artificial-Intelligence based data editing expert system provided specially for the FuzzyScan family bar code readers. Through DataWizard,
you can process the scanned data prior the transmissions in many ways as: Insert, Delete, Match, Verify, Replace, Reorganize, and Repeat Transmission. It will help
you to arrange the transmission of scanned data to any specific format without software modification.
ꢃ
ꢃ
Due to the resources used by this system, Full-feature DataWizard is only supported by PowerTool. Through the PowerTool, all settings and configurations can be done
on-screen, under Windows 95/98/NT/2000/XP environment.
A Condensed Version DataWizard is provided by each FuzzyScan series. Through this menu, the condensed DataWizard can be utilized via bar code menu readings with
ease.
ꢃ
ꢃ
Please note that all “Character” input should be referred to the ASCII/HEX Table listed in Appendix to find matched HEX value.
If you have any problem to use DataWizard, please refer to following pages for details and consult your local FuzzyScan vendor or our web site for any assistance.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Condensed DataWizard
♦ Data Formatter Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Formatter Control
P.C
Parameter Selection
Option Code
2nd Option Code
ꢂ
SS
MS
MS
Disable
FIN
(2 digits)
00
Select one bar code symbology
Select all bar code symbologies
automatic termination
automatic termination
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
1st Insertion
2nd Insertion
3rd Insertion
4th Insertion
[1-3 characters], [FIN]
[1-3 characters], [FIN]
[1-3 characters], [FIN]
2-digits identified position; max. 3 insertion characters
position
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
2-digits identified position; max. 3 insertion characters
position
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
2-digits identified position; max. 3 insertion characters
position
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
[1-3 characters], [FIN]
2-digits identified position; max. 3 insertion characters
position
ꢃ
ꢃ
The Data Formatter is used to edit the scanned raw data prior to transmitting the data to the host computers or terminals. It allows you to select desired bar code
symbologies for formatter control, and provides Multiple Position Insertion and Multiple Character Insertion (max three characters) in the identified position.
While the Data Formatter is enabled, it arranges only scanned data without Preamble, Postamble, STX, ETX, Data Length, Prefix/Suffix Symbolology ID or Record
Suffix. All of the above programmable parameters perform the same function depending on your setting.
ꢃ
ꢃ
Regarding the “Bar Code Selection” and “Position Calculation” of data formatter, please refer to page 60 for details.
Please note that all “Character” input should be referred to the ASCII/HEX Table listed in Appendix to find matched HEX value.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Condensed DataWizard
♦ Data Verifier Setting ♦
PROGRAM
Family Code Selection
Verifier Control
F_DEFAULT
P.C
Parameter Selection
Option Code
2nd Option Code
ꢂ
SS
MS
MS
Disable
FIN
(2 digits)
00
Select one bar code symbology
Select all bar code symbologies
automatic termination
automatic termination
ꢂ
SS
MS
Disable
Enable
FIN
(2 digits)
Identified Data Length
1st Identified Character
2nd Identified Character
3rd Identified Character
Determine the identified data length for verification.
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
[00-7F]
[00-7F]
[00-7F]
2-digits checking position; 1 identified character
position
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
2-digits checking position; 1 identified character
position
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
2-digits checking position; 1 identified character
position
ꢃ
ꢃ
The Data Verifier is used to provide advanced verification for error-free scanning and to work as an Embedded Data Transmitting Filter.
All data must conform to the Identified Bar Code Symbologies, Identified Data Length, and one to three Identified Characters in the checking position. Otherwise, the
FuzzyScan will not transmit the data to the host computers or terminals, but will instead issue 3 long beeps for verification error and skip the scanned data.
ꢃ
ꢃ
ꢃ
The Data Verifier checks only scanned data without Preamble, Postamble, STX, ETX, Data Length, Prefix/Suffix Symbology ID or Record Suffix.
Regarding the “Bar Code Selection” and “Position Calculation” of Data Verifier, please refer to page 60 for details.
Please note that all “Character” input should be referred to the ASCII/HEX Table listed in Appendix to find matched HEX value.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Condensed DataWizard
♦ Data Replacer Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Replacer Control
P.C
Parameter Selection
Option Code
2nd Option Code
ꢂ
SS
MS
MS
Disable
FIN
(2 digits)
00
Select one bar code symbology
Select all bar code symbologies
automatic termination
automatic termination
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
1st Replacement
2nd Replacement
3rd Replacement
[00-7F]
[00-7F]
[00-7F]
2-digits identified position; 1 replacement character
position
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
2-digits identified position; 1 replacement character
position
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
2-digits identified position; 1 replacement character
position
ꢃ
ꢃ
The Data Replacer is used to edit the scanned raw data prior to transmitting the data to the host computers or terminals. It allows you to select desired bar code
symbologies for replacer control, and provides Multiple Position Replcement in the identified position.
All data must conform to the Identified Bar Code Symbologies, and one to three Identified Characters in the identified position While the Data Replacer is enabled, it
arranges only scanned data without Preamble, Postamble, STX, ETX, Data Length, Prefix/Suffix Symbology ID or Record Suffix.
ꢃ
ꢃ
Regarding the “Bar Code Selection” and “Position Calculation” of Data Replacer, please refer to page 60 for details.
Please note that all “Character” input should be referred to the ASCII/HEX Table listed in Appendix to find mathced HEX value.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Condensed DataWizard
♦ Data Organizer Setting ♦
PROGRAM
F_DEFAULT
Family Code Selection
Organizer Control
P.C
Parameter Selection
Option Code
2nd Option Code
ꢂ
SS
MS
MS
Disable
FIN
(2 digits)
00
Select one bar code symbology
Select all bar code symbologies
automatic termination
automatic termination
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
1st Organization
2nd Organization
ꢂ
0 (Forward)
1 (Backward)
2-digits identified position;
Forward/backward data transmission setting
position
direction
ꢂ
SS
DS
Disable
Enable
FIN
(2 digits)
ꢂ
0 (Forward)
1 (Backward)
2-digits identified position;
Forward/backward data transmission setting
position
direction
ꢂ
SS
DS
Transmitted data excluded the data of identified position
Transmitted data included the data of identified position
0
1
Include/Exclude Control
ꢃ
ꢃ
The Data Organizer is used to edit the scanned raw data prior to transmitting the data to the host computers or terminals. It allows you to select desired bar code
symbologies for organizer control, and provides maximum two identified positions to send the data forward or backward. It also allows you to control the transmitted data
including or excluding the data of identification position. Please refer to the application example listed in page 60 for details.
While the Data Organizer is enabled, it arranges only scanned data without Preamble, Postamble, STX, ETX, Data Length, Prefix/Suffix Symbology ID or Record
Suffix.
ꢃ
ꢃ
Regarding the “Bar Code Selection” and “Position Calculation” of Data Organizer, please refer to page 60 for details.
Please note that all “Character” input should be referred to the ASCII/HEX Table.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
[Data Verifier, Data Replacer, Data Organizer]
Select a Bar Code Symbology
If there is a 11-character data string, please refer to the
following to calculate the actual position for identification.
You can select one or all types of bar code symbologies to
use Condensed DataWizard for advanced transmission
arrangement. If you scan “00” to select all types, the
FuzzyScan will arrange all incoming data to meet your
pre-defined format. If you want to select only one type bar
code, please select one of the option code listed below.
X
X
X
X
X
X
X
X
X
X
X
00
01
02
03
04
05
06
07
08
09
10
Application Example
Code 128 : 01
EAN-8 : 05
Code 93 : 09
If your bar code label is a 16-digit Interleaved 2 of 5 which
includes the information of 6-digit date code, 6-digit serial
number and 4-digit unit price, you want the FuzzyScan do
the following for you without software modification:
UCC/EAN 128 : 31
UPC-A : 02
EAN-8 with 2 supple : 35
EAN-8 with 5 supple.: 45
Codabar/NW-7 : 06
Code 39 : 07
Code 11 : 10
MSI/Plessey : 11
UK/Plessey : 12
Telepen : 13
UPC-A with 2 supple.: 32
UPC-A with 5 supple.: 42
UPC-E : 03
Code 32 : 37
GS1 Data Bar : 14
IATA : 15
ꢃ Apply only Interleaved 2 of 5 to the condensed
UPC-E with 2 supple.: 33
UPC-E with 5 supple.: 43
EAN-13 : 04
Trioptic Code 39: 47
Matrix 2 of 5 : 38
Interleaved 2 of 5 : 48
DataWizard.
Coupon Code : 16
PDF417/MicroPDF417: 22
Codablock: 23
ꢃ Check bar code is actually with 16-digit length.
EAN-13 with 2 supple. : 34 China Postal Code : 58
EAN-13 with 5 supple. : 44 German Postal Code : 68
ꢃ Allow bar code output whose date code is leading with
Korea Post Code: 26
“9”.
Position Calculation
[Data Formatter]
ꢃ Three outputs with “TAB” suffix.
ꢃ The date code output should skip “9” and replaced it by
“A”.
If there is a 5-character input data string, refer to the following
to calculate the actual position for insertion:
ꢃ The serial number output should be led with “SN”.
X
X
X
X
X
ꢃ The unit price output should be skipped the first 2
00
01
02
03
04
05
digits.
ꢃ Test Bar Code : 9 8 1 0 2 5 1 2 3 4 5 6 9 8 7 6
ꢃ Actual Output : A81025[TAB]SN123456[TAB]76[TAB]
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Your FuzzyScan
Programming Procedure
[Data Verifier]
[Data Replacer]
ꢃ Scan “Program” to enter the programming mode.
ꢃ Scan “Replacer Control” and set bar code symbology
to “48”.
ꢃ Scan “Verifier Control” and set bar code symbology to “48”
(Interleaved 2 of 5).
ꢃ
Scan “1st Replacement” and set the identified position
to “00”, then replaced character to “41” (Hex Code of
ꢃ Scan “Identified Data Length” and set the length to “16”.
A).
ꢃ Scan “1st Identified Character” and set the identified
position to “00”, then set the identified character to “39”
(Hex Code of 9).
[Data Organizer]
ꢃ Scan “Organizer Control” and set bar code symbology
to “48”.
[Data Formatter]
ꢃ Scan “1st Organization” and set the identified position
to “16”, then set the data transmission to “0” (forward).
ꢃ Scan “Formatter Control” and set bar code symbology to
“48”.
ꢃ Scan “2nd Organization” and set the identified position
to “17”, then set the data transmission to “1”
(backward).
ꢃ Scan 1st Insertion” and set the identified position to “06”,
then inserted characters to “09” (Hex Code of TAB), “53”
(Hex Code of S), “4E” (Hex Code of N).
ꢃ
Scan “END” (Exit) to terminate the programming.
ꢃ Scan “2nd Insertion” and set the identified position to “12”,
then inserted character to “09”. In the final, you must scan
“FIN” (Finish) code to terminate this selection.
[Important Notice]
ꢃ
Scan “3rd Insertion” and set the identified position to “16”,
then inserted character to “09”. In the final, you must scan
“FIN” (Finish) code to terminate this selection.
Please note that Condensed DataWizard will follow the
preset working flow as below:
Verifier
ꢀ
Formatter
ꢀ
Replacer
ꢀ
Organizer
So when you set the identified position in Data Organizer,
you must consider the inserted data which you already set
via Data Formatter.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Symbology ID Table
Each AIM Code Identifier contains the three-character string ]cm where:
] = Flag Character
c = Code Character
m = Modifier Character
Cino ID
AIM ID
Cino ID
AIM ID
Code Family
Primary Format
Code Family
Primary Format
Code
Code
Modified
Code
Code
Modified
Character
Character
Character
Character
Character
Character
UPC-A
m
1
EAN/JAN-8
4
1
A
E
N
F
E
UPC-A with 2 supple.
UPC-A with 5 supple.
UPC-E
EAN/JAN-8 with 2 supple.
EAN/JAN-8 with 5 supple.
EAN/JAN-13
2
2
E
m
1
m
1
UPC
EAN/JAN
E
UPC-E with 2 supple.
UPC-E with 5 supple.
EAN/JAN-13 with 2 supple.
EAN/JAN-13 with 5 supple.
2
2
Example: A UPC-A bar code 012345678950 with 2 supplement 12 is
transmitted as ]E0012345678950]E112
Example: A EAN/JAN-8 bar code 49123562 with 5 supplement 12345 is
transmitted as ]E449123562]E212345
Code 128
B
C
D
I
m
1
Code 93
Code 93
H
P
R
S
T
G
H
M
P
m
m
m
0
Code 128
Codabar
C
GS1-128
Code 11
Code 11
Codabar/NW-7
Standard/Industrial 2 of 5
Matrix 2 of 5
F
S
X
I
m
0
MSI/Plessey
UK/Plessey
Telepen
MSI/Plessey
UK/Plessey
Telepen
K
J
0
B
m
Interleaved 2 of 5
m
GS1 DataBar GS1 Databar
Code 25
X
e
0
Compsoite
Composite Code
Code 39
China Postal Code
L
X
0
G
W
G
V
A
X
A
L
m
0
0
0
0
0
Code 39
German Postal Code
IATA
M
O
Z
I
3
Code 39 Trioptic
Code 32
IATA
R
m
UCC Coupon Code
PDF417
PDF417/Micro PDF417
Codablock F
Example : A UPC-A 512345678900 + GS1-128 81010123451297 bar
code is transmitted as]E0512345678900]C181010123451297
Example: A EAN-13 9923456789019 + GS1-128 81010123451297 bar
code is transmitted as ]E09923456789019]C181010123451297
Codablock
Korea Post
Y
O
X
UCC Coupon
Korea Post Code
a
Remark: Above examples are given for the transmission of AIM ID.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Keyboard Function Code Table
No.
00
01
02
03
04
05
06
07
08
09
10
11
ANSI
NUL
SOH
STX
ETX
EOT
ENQ
ACK
BEL
BS
ASCII
00H
01H
02H
03H
04H
05H
06H
07H
08H
09H
0AH
0BH
0CH
0DH
0EH
0FH
Key Function
No.
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
ANSI
DLE
DC1
DC2
DC3
DC4
NAK
SYN
ETB
CAN
EM
ASCII
10H
11H
Key Function
RESERVED
CTRL (Left)
ALT (Left)
SHIFT
F7
F8
12H
13H
14H
15H
16H
17H
18H
19H
1AH
1BH
1CH
1DH
1EH
1FH
F9
F10
F11
F12
CAPS LOCK
NUM LOCK
ESC
INS (Insert) (Edit)
DEL (Delete) (Edit)
HOME (Edit)
F1
BACK SPACE
HT
TAB
END (Edit)
LF
F2
SUB
ESC
FS
PAGE UP (Edit)
PAGE DOWN (Edit)
UP (Edit)
VT
F3
12
13
14
15
FF
F4
CR
ENTER (CR)
GS
DOWN (Edit)
LEFT (Edit)
SO
F5
F6
RS
SI
US
RIGHT (Edit)
To emulate the keyboard function key input for user definable parameters, user must configure actual content using the
Reserved ASCII 0 – 31 characters, and also Enable the “Function Key Emulation”. Otherwise, the Ctrl output will be done
by the scanner. Please refer to the above Keyboard Function Code Table which is for IBM PC/XT/AT, PS/2, PS/VP,
COMPAQ PC, HP Vectra PC, Notebook PC, APPLE and PowerMac, and WYSE PC Enhanced or fully compatible machines.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
ASCII Input Shortcut
To configure the user definable parameters of FuzzyScan via
programming menu, FuzzyScan will ask you to scan your
desired ASCII value in HEX form. You have to refer to the
“HEX/ASCII Table” for details.
HEX/ASCII Reference Table
H
0
1
2
3
4
5
6
7
L
0
1
NUL
SOH
STX
ETX
EOT
ENQ
ACK
BEL
BS
DLE SPACE
0
1
2
3
4
5
6
7
8
9
:
@
A
B
C
D
E
F
P
Q
R
S
T
U
V
W
X
Y
Z
[
`
a
b
c
d
e
f
p
DC1
DC2
DC3
DC4
NAK
SYN
ETB
CAN
EM
!
"
q
Example:
2
r
If you want the scanned data output leading with a Dollar
Sign, you have to set the “Preamble” to “$”. The configuration
procedure is listed below for reference.
3
#
$
%
&
'
s
4
t
5
u
ꢃ Scan the system command – PROGRAM listed on page
6
v
3-24 to enter programming mode.
7
G
H
I
g
h
i
w
ꢃ Scan family code – PREAMBLE to select this family.
8
(
x
9
HT
)
y
ꢃ Refer to the Hex/ASCII Table, you will find the HEX value
of “$” is 24.
A
B
C
D
E
F
LF
SUB
ESC
FS
*
J
j
z
VT
+
,
;
K
L
k
l
{
ꢃ Scan the option code – 2 listed on the fold out back cover.
ꢃ Scan the option code – 4 listed on the fold out back cover.
FF
<
=
>
?
\
|
}
CR
GS
-
M
N
O
]
m
n
o
ꢃ Scan the system command – FIN (Finish) to terminate
SO
RS
.
^
~
Preamble setting.
SI
US
/
_
DEL
ꢃ Scan the system command – End to exit the programming
Example : ASCII “A” → HEX “41”; ASCII “a” → “61”
: High Byte of HEX Value
mode for normal operation.
: Low Byte of HEX Value
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Numeric Bar Codes
0
5
6
7
3
4
8
9
1
2
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Link Mode Quick Set
Uninstall
SPP Slave Mode
PAIR Mode
HID Mode
SPP Master Mode
PICO Mode
Operation Mode Quick Set
Trigger Mode
Presentation Mode
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Host Interface Quick Set
(Work with Smart Cradle only)
RS232 Serial
PS/2 (DOS/V) KBW Standard Mode
USB HID Standard Mode ꢂ
Keyboard Replacement
PS/2 (DOS/V) KBW Turbo Mode
USB HID Turbo Mode
USB Com Port Emulation
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Option Codes
0
8
9
4
5
6
7
C
D
E
F
1
2
3
A
B
FIN (Finish)
END (Exit)
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Connecting Apple iOS Devices Quick Sets
Enable Variable PIN Code
Disable Variable PIN Code
BT PIN Code
Please refer to Quick Reference Guide of “Connecting FuzzyScan Bluetooth Cordless Scanners with your Apple iOS
Devices” for more details.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
System Commands
PROGRAM
(Enter Programming Mode)
Save Configuration
Sleep
FIN (Finish)
Clone
Paging
END
(Exit Programming Mode)
Factory Default
PowerTool Host Link
System Information List
(SYSLIST)
Master Default
ꢃ
ꢃ
Factory Default: After scanning” Factory Default” command, all parameters will be returned to factory default value (The radio link will be disconnected and the
scanner will revert to uninstall state).
Master Default: After scanning “Master Default” command, the scanner will remain the pre-set parameters of Host Interface Selection, Keyboard Interface
Control (except Record Suffix; Preamble; Postamble), Serial Interface Control (except Record Suffix; Preamble; Postamble), Wand/Laser Emulation Control,
Bluetooth Device Name, Bluetooth PIN Code, and Out-of-range Scanning, the rest of parameters will be returned to default value (The radio link is still keep
on).
Save User Default
User Default
ꢃ
User Default: After scanning” Save User Default” command, all current parameters will be stored to the flash memory. Once you change the parameter and
would like to return to previous setting, please scan “User Default”.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Indications
Link Indicator
Status Indicator
Descriptions
Link Indicator
Beeper
Radio connected
1 blue blink per 2.5 sec.
3 blue blinks per 2 sec.
Quick blue blinks
Off
Radio disconnected
During connection
Radio connection built
Radio connection lost
Data Transmission
Off
Short clicks
1 blue blink per 2.5 sec.
3 blue blinks per 2 sec.
Quick blue blink
4 beeps in ascending tone
4 beeps in descending tone
Short clicks
Descriptions
Status Indicator
Steady red
Beeper
Under charging (on cradle)
Fully charged (on cradle)
Under batch scanning
Pair failure
Off
1 green blink at regular interval
Off
1 green blink per 2.5 sec.
Off
Steady red
2 Di-do Di-do beeps
2 long beeps
1 beep at regular interval
8 beeps
Out of memory
2 red blinks
Battery power low
Battery power extremely low
Good read
1 red blink at regular interval
8 red blinks
1 green blink
1 good read beep
Off
Under Configuration
Uninstall state
Steady red
Alternative red and green blinks
Off
Upgrade state
Steady red
Short click
3 long beeps
6 page beeps
Off
Time out warning
Off
Off
Off
Paged by smart cradle
Sleep state / Battery no power
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Center Indicator
Side Indicators
HB2100 Charging Cradle Indication
Descriptions
Power
Beeper
Power on
Steady blue
Off
HB2110 Smart Cradle Indications
Indicators
Descriptions
Beeper
Center
1 blue blink
Side
Power on
Off
Power on beeps
Short clicks
Smart Cradle Upgrade State
Uninstall state
Off
Off
Steady red
Alternative red-green blinks Off
Radio Connected
Radio Disconnected Off
Radio Connected Steady blue
Radio Disconnected Off
Steady blue
Steady Green
Steady red
Off
Off
PICO Mode
PAIR Mode
Off
Off
Steady red
Steady green
Off
Off
PICO Mode
PAIR Mode
Steady blue
Steady blue
6 page beeps
6 page beeps
Smart cradle paged
by scanner
79
Download from Www.Somanuals.com. All Manuals Search And Download.
|